main
Ray Publish 0.1.0 896e270

LM4128AQ1MF4.1

Texas Instruments · Voltage References · SOT-23-5

LM4128AQ1MF4.1 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 N/C unconnected No connect pin; leave floating.
2 GND power_in Ground reference pin for the device.
3 EN input Enable pin; the datasheet gives a maximum low input level of 35 %V and a minimum high input level of 65 %V, and with EN = 0 V the supply current in shutdown is 3 µA typical (7 µA max).
4 VIN power_in Input supply pin; maximum input supply voltage is 5.5 V and the reference requires VIN of VREF + 400 mV to 5.5 V at 10 mA load.
5 VREF power_out Voltage reference output, which supplies loads up to 20 mA maximum load current.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Power Supply Chip
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage Initial Accuracy (A Grade, LM4128A-4.1) VREF -0.1 0.1 % 8
Temperature Coefficient (LM4128A-4.1) TCVREF / °C 75 ppm / °C 8
Supply Current IQ 60 100 µA VIN = 5V, ILOAD = 0A 8
Supply Current in Shutdown IQ_SD 3 7 µA EN = 0V 8
Load Regulation ΔVREF/ΔILOAD 25 120 ppm / mA 0 mA ≤ ILOAD ≤ 20 mA 8
Dropout Voltage VIN - VREF 175 400 mV ILOAD = 10 mA 8
Enable Pin Maximum Low Input Level VIL 35 %V 8
Enable Pin Minimum High Input Level VIH 65 %V 8
Maximum Input Supply Voltage 5.5 V 2
Maximum Load Current 20 mA 2
Junction Temperature Range TJ -40 125 °C 2
Maximum Voltage on any input -0.3 6 V 2
Power Dissipation 350 mW TA = 25°C 2
Storage Temperature Range -65 150 °C 2
Lead Temperature Soldering 260 °C 10 s 2
Lead Temperature Vapor Phase 215 °C 60 s 2
Lead Temperature Infrared 220 °C 15 s 2
ESD Susceptibility Human Body Model 2 kV Human body model, 100 pF through 1.5 kΩ 2
Junction-to-Ambient Thermal Resistance (SOT-23) θJ-A 220 °C/W SOT-23 package 2

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing Abs ESD Susceptibility(3) Human Body Model 2 kV (1) Absolute Maximum Ratings indicate limits beyond which damage may occur to the device. Operating Ratings indicate conditions for 2

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: LM4128AQ1MF4.1
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: lm4128aq1mf4-1-etched.step / lm4128aq1mf4-1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm4128aq1mf4-1.step / lm4128aq1mf4-1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (34 pp, sha256 dba8a4a80be91bcb, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF