Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LM4050AEM3X-5.0

Texas Instruments · Voltage References · SOT-23-3

LM4050AEM3X-5.0 from Texas Instruments, in a SOT-23-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 Cathode passive Shunt current and input voltage terminal; the datasheet specifies an operating current range of 60 µA to 15 mA for the LM4050-N family.
2 Anode power_in Common pin, normally connected to ground.
3 NC unconnected No internal connection; per the pin-figure footnote it must be left floating or connected to pin 2.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-3
Category Power Management ICs
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Reverse Breakdown Voltage (nominal, 5-V option) VR 5 V IR = 100 μA 8
Reverse Breakdown Voltage Tolerance, A grade, initial VR -5 5 mV IR = 100 μA 8
Reverse Breakdown Voltage Tolerance, A grade, extended temperature range VR -30 30 mV TA = TJ = TMIN to TMAX (extended temp. range) 8
Minimum Operating Current IRMIN 56 74 μA TA = TJ = 25°C 8
Minimum Operating Current, extended temperature range IRMIN 90 μA TA = TJ = TMIN to TMAX (extended temp. range) 8
Average Reverse Breakdown Voltage Temperature Coefficient ΔVR/ΔT -30 30 ppm/°C IR = 10 mA 8
Average Reverse Breakdown Voltage Temperature Coefficient ΔVR/ΔT -20 20 ppm/°C IR = 1 mA 8
Average Reverse Breakdown Voltage Temperature Coefficient ΔVR/ΔT -50 50 ppm/°C IR = 100 μA, TA = TJ = TMIN to TMAX 8
Reverse Breakdown Voltage Change with Operating Current ΔVR/ΔIR 0.2 1 mV IRMIN ≤ IR ≤ 1 mA, TA = TJ = 25°C 8
Reverse Breakdown Voltage Change with Operating Current ΔVR/ΔIR 1.4 mV IRMIN ≤ IR ≤ 1 mA, TA = TJ = TMIN to TMAX 8
Reverse Breakdown Voltage Change with Operating Current ΔVR/ΔIR 2 8 mV 1 mA ≤ IR ≤ 15 mA, TA = TJ = 25°C 8
Reverse Breakdown Voltage Change with Operating Current ΔVR/ΔIR 12 mV 1 mA ≤ IR ≤ 15 mA, TA = TJ = TMIN to TMAX 8
Reverse Dynamic Impedance ZR 0.5 Ω IR = 1 mA, f = 120 Hz, IAC = 0.1 IR 8
Wideband Noise eN 93 μVrms IR = 100 μA, 10 Hz ≤ f ≤ 10 kHz 8
Reverse Breakdown Voltage Long Term Stability ΔVR 120 ppm t = 1000 hrs, T = 25°C ±0.1°C, IR = 100 μA 8
Thermal Hysteresis VHYST 1.4 mV IR = 100 μA, ΔT = −40°C to 125°C 8
Reverse Current IR 20 mA 3
Forward Current IF 10 mA 3
Power Dissipation PD 280 mW TA = 25°C 3
Maximum Junction Temperature TJmax 150 °C 3
Storage Temperature Tstg -65 150 °C 3
Ambient Temperature Range (extended) TA -40 125 °C Extended temperature range 4
Junction Temperature Range (extended) TJ -40 125 °C Extended temperature range 4
Junction-to-ambient thermal resistance RθJA 287 °C/W DBZ (SOT-23) 3 pins 4
Junction-to-case (top) thermal resistance RθJC(top) 106.6 °C/W DBZ (SOT-23) 3 pins 4
Junction-to-board thermal resistance RθJB 57.7 °C/W DBZ (SOT-23) 3 pins 4
Junction-to-top characterization parameter ψJT 5.5 °C/W DBZ (SOT-23) 3 pins 4
Junction-to-board characterization parameter ψJB 56.4 °C/W DBZ (SOT-23) 3 pins 4

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: LM4050AEM3X-5.0
  • Footprint: Package_TO_SOT_SMD:SOT-23-3
  • 3D model: SOT-23-3, generated on the KiCad land (body 1.3 x 2.92 mm, terminals on the pads, 1.12 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: lm4050aem3x-5-0-etched.step / lm4050aem3x-5-0-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm4050aem3x-5-0.step / lm4050aem3x-5-0.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (42 pp, sha256 7840e9c32f814e44, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF