Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LM4041DIM7-ADJ

Texas Instruments · Voltage References · SC-70-5

LM4041DIM7-ADJ from Texas Instruments, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected No connect pin in the SC70 ADJ pinout.
2 Anode power_in Anode pin, normally grounded; on the SC70 package it is the (-) output connected through the die attach.
3 Cathode bidirectional Shunt current and output voltage; recommended reverse current is 60 μA to 1200 μA.
4 NC unconnected No connect pin in the SC70 ADJ pinout.
5 FB input Feedback pin for adjustable output voltage, which can be set from 1.24 V to 10 V through an external resistor divider.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SC-70-5
Category Power Supply Chip
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Reference voltage tolerance VREF -12 12 mV IR = 100 μA, VOUT = 5 V, TJ = 25°C 11
Reference voltage tolerance over temperature VREF -24 24 mV IR = 100 μA, VOUT = 5 V, TA = TJ = TMIN to TMAX 11
Minimum operating current IRMIN 60 65 μA TJ = 25°C 11
Minimum operating current over temperature IRMIN 70 μA TA = TJ = TMIN to TMAX 11
Reference voltage change with operating current ΔVREF/ΔIR 2 mV IRMIN ≤ IR ≤ 1 mA, TJ = 25°C, SOT-23: VOUT ≥ 1.6 V 11
Reference voltage change with operating current over temperature ΔVREF/ΔIR 2.5 mV IRMIN ≤ IR ≤ 1 mA, TA = TJ = TMIN to TMAX, SOT-23: VOUT ≥ 1.6 V 11
Reference voltage change with operating current ΔVREF/ΔIR 6 mV 1 mA ≤ IR ≤ 12 mA, TJ = 25°C, SOT-23: VOUT ≥ 1.6 V 12
Reference voltage change with operating current over temperature ΔVREF/ΔIR 8 mV 1 mA ≤ IR ≤ 12 mA, TA = TJ = TMIN to TMAX, SOT-23: VOUT ≥ 1.6 V 12
Reference voltage change with output voltage ΔVREF/ΔVO -2.5 mV/V IR = 1 mA, TJ = 25°C 12
Reference voltage change with output voltage over temperature ΔVREF/ΔVO -3 mV/V IR = 1 mA, TA = TJ = TMIN to TMAX 12
Feedback current IFB 150 nA TJ = 25°C 12
Average reference voltage temperature coefficient ΔVREF/ΔT -150 150 ppm/°C VOUT = 5 V, IR = 1 mA, TA = TJ = TMIN to TMAX 12
Reference voltage VREF 1.233 V IR = 100 μA, VOUT = 5 V 11
Dynamic output impedance ZOUT 0.3 Ω IR = 1 mA, f = 120 Hz, IAC = 0.1 IR, VOUT = VREF 12
Wideband noise eN 20 μVrms IR = 100 μA, 10 Hz ≤ f ≤ 10 kHz 12
Reference voltage long-term stability ΔVREF 120 ppm t = 1000 hrs, IR = 100 μA, TJ = 25°C ±0.1°C 12
Thermal hysteresis VHYST 0.08 % ΔT = −40°C to +125°C 12
Reverse current IR 20 mA 4
Forward current IF 10 mA 4
Maximum output voltage (LM4041-N ADJ, LM4041-N-Q1 ADJ) VOUT 15 V 4
Power dissipation (DCK package) PD 241 mW TA = 25°C, DCK package 4
Storage temperature Tstg -65 150 °C 4
Reverse current (ADJ) IR 60 1200 μA LM4041-N ADJ, LM4041-N-Q1 ADJ 5
Output voltage (ADJ) VOUT 1.24 10 V LM4041-N ADJ, LM4041-N-Q1 ADJ 5
Industrial operating temperature TA -40 85 °C Industrial temperature 5
Junction-to-ambient thermal resistance (SC70) RθJA 265.3 °C/W SC70 5-pin, board mounted 5
Junction-to-case (top) thermal resistance (SC70) RθJC(top) 93.1 °C/W SC70 5-pin 5
Junction-to-board thermal resistance (SC70) RθJB 46.7 °C/W SC70 5-pin 5
Junction-to-top characterization parameter (SC70) ψJT 2.2 °C/W SC70 5-pin 5
Junction-to-board characterization parameter (SC70) ψJB 45.9 °C/W SC70 5-pin 5

CAD (KiCad official)

  • Symbol: LM4041DIM7-ADJ
  • Footprint: Package_TO_SOT_SMD:SOT-353_SC-70-5
  • 3D model: SC-70-5 (KiCad packages3D, STEP)
  • 3D model files: lm4041dim7-adj-etched.step / lm4041dim7-adj-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm4041dim7-adj.step / lm4041dim7-adj.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (50 pp, sha256 cf8b234725c1cd7e, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF