main
Ray Publish 0.1.0 8e9a8ee

LM4040D20QDBZR

Texas Instruments · Voltage References · SOT-23

LM4040D20QDBZR from Texas Instruments, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 CATHODE bidirectional Shunt current/voltage input; the continuous cathode current is recommended at 15 mA maximum, with an absolute maximum range of -10 mA to 25 mA.
2 ANODE output Common pin, normally connected to ground; per the SOT-23 connections note, it has a parasitic Schottky diode to pin 3.
3 * input Must float or connect to anode; TI recommends connecting it to the anode in high-EMI or high-frequency switching environments, and the SOT-23 datasheet note requires pin 3 to be left floating or connected to pin 2.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23
Category Power Supply Chip
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Reverse breakdown voltage tolerance (ΔVZ), 25°C ΔVZ -20 20 mV IZ = 100μA, TA = 25°C 8
Reverse breakdown voltage tolerance (ΔVZ), full range ΔVZ -50 50 mV IZ = 100μA, full range TA = -40°C to 125°C 8
Minimum cathode current (IZ,min), 25°C IZ,min 45 75 μA TA = 25°C 8
Minimum cathode current (IZ,min), full range IZ,min 80 μA full range TA = -40°C to 125°C 8
Average temperature coefficient of reverse breakdown voltage, IZ = 10mA αVZ -20 20 ppm/°C IZ = 10mA, TA = 25°C 8
Average temperature coefficient of reverse breakdown voltage, IZ = 1mA, 25°C αVZ -15 15 ppm/°C IZ = 1mA, TA = 25°C 8
Average temperature coefficient of reverse breakdown voltage, IZ = 1mA, full range αVZ -150 150 ppm/°C IZ = 1mA, full range TA = -40°C to 125°C 8
Average temperature coefficient of reverse breakdown voltage, IZ = 100μA αVZ -15 15 ppm/°C IZ = 100μA, TA = 25°C 8
Reverse breakdown voltage change with cathode current change, IZ,min < IZ < 1mA, 25°C VZ/IZ 0.3 1 mV IZ,min < IZ < 1mA, TA = 25°C 8
Reverse breakdown voltage change with cathode current change, IZ,min < IZ < 1mA, full range VZ/IZ 1.2 mV IZ,min < IZ < 1mA, full range TA = -40°C to 125°C 8
Reverse breakdown voltage change with cathode current change, 1mA < IZ < 15mA, 25°C VZ/IZ 2.5 8 mV 1mA < IZ < 15mA, TA = 25°C 8
Reverse breakdown voltage change with cathode current change, 1mA < IZ < 15mA, full range VZ/IZ 10 mV 1mA < IZ < 15mA, full range TA = -40°C to 125°C 8
Reverse dynamic impedance ZZ 0.3 1.1 Ω IZ = 1mA, f = 120Hz, IAC = 0.1 IZ, TA = 25°C 8
Reverse breakdown voltage VZ 2.048 V IZ = 100μA, TA = 25°C 8
Wideband noise eN 35 μVRMS IZ = 100μA, 10Hz ≤ f ≤ 10kHz, TA = 25°C 8
Long-term stability of reverse breakdown voltage 120 ppm t = 1000 h, TA = 25°C ± 0.1°C, IZ = 100μA 8
Thermal hysteresis VHYST 0.08 % ΔTA = -40°C to 125°C 8
Cathode current (recommended operating) IZ 15 mA 5
Free-air temperature, LM4040xxxQ TA -40 125 °C LM4040xxxQ 5
Continuous cathode current IZ -10 25 mA 5
Operating virtual junction temperature TJ 150 °C 5
Storage temperature range Tstg -65 150 °C 5
Electrostatic discharge, human body model (HBM) V(ESD) -2000 2000 V per ANSI/ESDA/JEDEC JS-001, all pins 5
Electrostatic discharge, charged device model (CDM) V(ESD) -500 500 V per JEDEC JESD22-C101, all pins 5
Junction-to-ambient thermal resistance (DBZ, 3-pin SOT-23) RθJA 206 °C/W DBZ (3-pin SOT-23) package 5

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: LM4040D20QDBZR
  • Footprint: Package_TO_SOT_SMD:SOT-23
  • 3D model: SOT-23, generated on the KiCad land (body 1.3 x 2.92 mm, terminals on the pads, 1.12 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: lm4040d20qdbzr-etched.step / lm4040d20qdbzr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm4040d20qdbzr.step / lm4040d20qdbzr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (62 pp, sha256 f43b6b6d3ecd51c8, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF