main
Ray
lm4040c20idbzr: specified limits as data (metadata.characteristics, 22 rows from the datasheet)
01e4ffb
LM4040C20IDBZR
Texas Instruments · Voltage Reference · SOT-23
LM4040C20IDBZR from Texas Instruments, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CATHODE | bidirectional | Shunt current/voltage input (I/O); current must be supplied to this pin (between IZ,min and 15mA max) to establish the regulated reverse breakdown voltage VZ relative to the anode. |
| 2 | ANODE | power_in | Common pin, typically connected to ground/return of the shunt reference circuit. |
| 3 | * | passive | Must be left floating or connected to the anode (pin 2); a parasitic Schottky diode exists between this pin and the anode pin, so it must float or tie to pin 2, and TI recommends tying it to the anode in high-EMI or high-frequency switching-noise environments. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23 |
| Category | Power Management (PMIC) |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Reverse breakdown voltage tolerance (25°C) | ΔVZ | -10 | 10 | mV | IZ = 100μA, 25°C | 7 | |
| Reverse breakdown voltage tolerance (full range) | ΔVZ | -23 | 23 | mV | IZ = 100μA, full range TA = -40°C to 85°C | 7 | |
| Minimum cathode current (25°C) | IZ,min | 45 | 75 | μA | 25°C | 7 | |
| Minimum cathode current (full range) | IZ,min | 80 | μA | full range TA = -40°C to 85°C | 7 | ||
| Average temperature coefficient of VZ | αVZ | -20 | 20 | ppm/°C | IZ = 10mA, 25°C | 7 | |
| Average temperature coefficient of VZ | αVZ | -15 | 15 | ppm/°C | IZ = 1mA, 25°C | 7 | |
| Average temperature coefficient of VZ | αVZ | -100 | 100 | ppm/°C | full range TA = -40°C to 85°C (printed in the IZ = 1mA block) | 7 | |
| Change in VZ with cathode current (IZ,min to 1mA) | ΔVZ/ΔIZ | 0.3 | 0.8 | mV | IZ,min < IZ < 1mA, 25°C | 7 | |
| Change in VZ with cathode current (IZ,min to 1mA, full range) | ΔVZ/ΔIZ | 1 | mV | IZ,min < IZ < 1mA, full range TA = -40°C to 85°C | 7 | ||
| Change in VZ with cathode current (1mA to 15mA) | ΔVZ/ΔIZ | 2.5 | 6 | mV | 1mA < IZ < 15mA, 25°C | 7 | |
| Change in VZ with cathode current (1mA to 15mA, full range) | ΔVZ/ΔIZ | 8 | mV | 1mA < IZ < 15mA, full range TA = -40°C to 85°C | 7 | ||
| Reverse dynamic impedance | ZZ | 0.3 | 0.9 | Ω | IZ = 1mA, f = 120Hz, IAC = 0.1IZ, 25°C | 7 | |
| Reverse breakdown voltage | VZ | 2.048 | V | IZ = 100μA, 25°C | 7 | ||
| Wideband noise | eN | 35 | μVRMS | IZ = 100μA, 10Hz ≤ f ≤ 10kHz, 25°C | 7 | ||
| Long-term stability | 120 | ppm | t = 1000 h, TA = 25°C ± 0.1°C, IZ = 100μA | 7 | |||
| Thermal hysteresis | VHYST | 0.08 | % | ΔTA = -40°C to 125°C | 7 | ||
| Continuous cathode current | IZ | -10 | 25 | mA | 5 | ||
| Operating virtual junction temperature | TJ | 150 | °C | 5 | |||
| Storage temperature range | Tstg | -65 | 150 | °C | 5 | ||
| Cathode current | IZ | 15 | mA | see parameter tables | 5 | ||
| Ambient temperature, natural ventilation (LM4040xxxI) | TA | -40 | 85 | °C | LM4040xxxI | 5 | |
| Junction-to-ambient thermal resistance | RθJA | 206 | °C/W | DBZ (3-pin) package | 5 |
CAD (KiCad official)
- Symbol:
LM4040C20IDBZR - Footprint:
Package_TO_SOT_SMD:SOT-23 - 3D model: SOT-23 (KiCad packages3D, STEP)
- 3D model files:
lm4040c20idbzr-etched.step/lm4040c20idbzr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm4040c20idbzr.step/lm4040c20idbzr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (62 pp, sha256
68faec55d71e5cd5, retrieved 2026-09-23, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LM4040C20IDBZR
**Texas Instruments** · Voltage Reference · SOT-23
LM4040C20IDBZR from Texas Instruments, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CATHODE | bidirectional | Shunt current/voltage input (I/O); current must be supplied to this pin (between IZ,min and 15mA max) to establish the regulated reverse breakdown voltage VZ relative to the anode. |
| 2 | ANODE | power_in | Common pin, typically connected to ground/return of the shunt reference circuit. |
| 3 | * | passive | Must be left floating or connected to the anode (pin 2); a parasitic Schottky diode exists between this pin and the anode pin, so it must float or tie to pin 2, and TI recommends tying it to the anode in high-EMI or high-frequency switching-noise environments. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23 |
| Category | Power Management (PMIC) |
| Pins | 3 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Reverse breakdown voltage tolerance (25°C) | ΔVZ | -10 | | 10 | mV | IZ = 100μA, 25°C | 7 |
| Reverse breakdown voltage tolerance (full range) | ΔVZ | -23 | | 23 | mV | IZ = 100μA, full range TA = -40°C to 85°C | 7 |
| Minimum cathode current (25°C) | IZ,min | | 45 | 75 | μA | 25°C | 7 |
| Minimum cathode current (full range) | IZ,min | | | 80 | μA | full range TA = -40°C to 85°C | 7 |
| Average temperature coefficient of VZ | αVZ | -20 | | 20 | ppm/°C | IZ = 10mA, 25°C | 7 |
| Average temperature coefficient of VZ | αVZ | -15 | | 15 | ppm/°C | IZ = 1mA, 25°C | 7 |
| Average temperature coefficient of VZ | αVZ | -100 | | 100 | ppm/°C | full range TA = -40°C to 85°C (printed in the IZ = 1mA block) | 7 |
| Change in VZ with cathode current (IZ,min to 1mA) | ΔVZ/ΔIZ | | 0.3 | 0.8 | mV | IZ,min < IZ < 1mA, 25°C | 7 |
| Change in VZ with cathode current (IZ,min to 1mA, full range) | ΔVZ/ΔIZ | | | 1 | mV | IZ,min < IZ < 1mA, full range TA = -40°C to 85°C | 7 |
| Change in VZ with cathode current (1mA to 15mA) | ΔVZ/ΔIZ | | 2.5 | 6 | mV | 1mA < IZ < 15mA, 25°C | 7 |
| Change in VZ with cathode current (1mA to 15mA, full range) | ΔVZ/ΔIZ | | | 8 | mV | 1mA < IZ < 15mA, full range TA = -40°C to 85°C | 7 |
| Reverse dynamic impedance | ZZ | | 0.3 | 0.9 | Ω | IZ = 1mA, f = 120Hz, IAC = 0.1IZ, 25°C | 7 |
| Reverse breakdown voltage | VZ | | 2.048 | | V | IZ = 100μA, 25°C | 7 |
| Wideband noise | eN | | 35 | | μVRMS | IZ = 100μA, 10Hz ≤ f ≤ 10kHz, 25°C | 7 |
| Long-term stability | | | 120 | | ppm | t = 1000 h, TA = 25°C ± 0.1°C, IZ = 100μA | 7 |
| Thermal hysteresis | VHYST | | 0.08 | | % | ΔTA = -40°C to 125°C | 7 |
| Continuous cathode current | IZ | -10 | | 25 | mA | | 5 |
| Operating virtual junction temperature | TJ | | | 150 | °C | | 5 |
| Storage temperature range | Tstg | -65 | | 150 | °C | | 5 |
| Cathode current | IZ | | | 15 | mA | see parameter tables | 5 |
| Ambient temperature, natural ventilation (LM4040xxxI) | TA | -40 | | 85 | °C | LM4040xxxI | 5 |
| Junction-to-ambient thermal resistance | RθJA | | 206 | | °C/W | DBZ (3-pin) package | 5 |
## CAD (KiCad official)
- Symbol: `LM4040C20IDBZR`
- Footprint: `Package_TO_SOT_SMD:SOT-23`
- 3D model: SOT-23 (KiCad packages3D, STEP)
- 3D model files: `lm4040c20idbzr-etched.step` / `lm4040c20idbzr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm4040c20idbzr.step` / `lm4040c20idbzr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lm4040) (62 pp, sha256 `68faec55d71e5cd5`, retrieved 2026-09-23, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lm4040c20idbzr-datasheet.pdf)