component
LM3S811-IQN50-C2T
Public Made by Adomby adom
Texas Instruments Microcontroller Units (MCUs/MPUs/SOCs), LQFP-48(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLM3S811-IQN50-C2T
Texas Instruments · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-48(7x7)
LM3S811-IQN50-C2T from Texas Instruments, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ADC0 | input | Analog-to-digital converter input 0 (analog, not 5-V tolerant). |
| 2 | ADC1 | input | Analog-to-digital converter input 1 (analog, not 5-V tolerant). |
| 3 | ADC2 | input | Analog-to-digital converter input 2 (analog, not 5-V tolerant). |
| 4 | ADC3 | input | Analog-to-digital converter input 3 (analog, not 5-V tolerant). |
| 5 | RST | input | System reset input, TTL-compatible levels. |
| 6 | LDO | power_out | Low drop-out regulator output voltage; requires an external capacitor of 1 µF or greater between the pin and GND. |
| 7 | VDD | power_in | Positive supply for I/O and some logic. |
| 8 | GND | power_in | Ground reference for logic and I/O pins. |
| 9 | OSC0 | input | Main oscillator crystal input or an external clock reference input (analog). |
| 10 | OSC1 | output | Main oscillator crystal output; leave unconnected when using a single-ended clock source. |
| 11 | PC7/CCP4 | bidirectional | GPIO port C bit 7, alternate function Capture/Compare/PWM 4 (TTL). |
| 12 | PC6/CCP3 | bidirectional | GPIO port C bit 6, alternate function Capture/Compare/PWM 3 (TTL). |
| 13 | PC5/CCP1 | bidirectional | GPIO port C bit 5, alternate function Capture/Compare/PWM 1 (TTL). |
| 14 | PC4 | bidirectional | GPIO port C bit 4 (TTL). |
| 15 | VDD | power_in | Positive supply for I/O and some logic. |
| 16 | GND | power_in | Ground reference for logic and I/O pins. |
| 17 | PA0/U0Rx | bidirectional | GPIO port A bit 0, alternate function UART module 0 receive (defaults to UART function). |
| 18 | PA1/U0Tx | bidirectional | GPIO port A bit 1, alternate function UART module 0 transmit (defaults to UART function). |
| 19 | PA2/SSIClk | bidirectional | GPIO port A bit 2, alternate function SSI clock. |
| 20 | PA3/SSIFss | bidirectional | GPIO port A bit 3, alternate function SSI frame. |
| 21 | PA4/SSIRx | bidirectional | GPIO port A bit 4, alternate function SSI receive. |
| 22 | PA5/SSITx | bidirectional | GPIO port A bit 5, alternate function SSI transmit. |
| 23 | VDD | power_in | Positive supply for I/O and some logic. |
| 24 | GND | power_in | Ground reference for logic and I/O pins. |
| 25 | PD0/PWM0 | bidirectional | GPIO port D bit 0, alternate function PWM 0 controlled by PWM Generator 0. |
| 26 | PD1/PWM1 | bidirectional | GPIO port D bit 1, alternate function PWM 1 controlled by PWM Generator 0. |
| 27 | PD2/U1Rx | bidirectional | GPIO port D bit 2, alternate function UART module 1 receive. |
| 28 | PD3/U1Tx | bidirectional | GPIO port D bit 3, alternate function UART module 1 transmit. |
| 29 | PB0/PWM2 | bidirectional | GPIO port B bit 0, alternate function PWM 2 controlled by PWM Generator 1. |
| 30 | PB1/PWM3 | bidirectional | GPIO port B bit 1, alternate function PWM 3 controlled by PWM Generator 1. |
| 31 | GND | power_in | Ground reference for logic and I/O pins. |
| 32 | VDD | power_in | Positive supply for I/O and some logic. |
| 33 | PB2/I2CSCL | bidirectional | GPIO port B bit 2, alternate function I2C clock (open drain; defaults to I2C function). |
| 34 | PB3/I2CSDA | bidirectional | GPIO port B bit 3, alternate function I2C data (open drain; defaults to I2C function). |
| 35 | PE0/PWM4 | bidirectional | GPIO port E bit 0, alternate function PWM 4 controlled by PWM Generator 2. |
| 36 | PE1/PWM5 | bidirectional | GPIO port E bit 1, alternate function PWM 5 controlled by PWM Generator 2. |
| 37 | PC3/TDO/SWO | bidirectional | GPIO port C bit 3, JTAG TDO and SWO output; defaults to JTAG function at reset. |
| 38 | PC2/TDI | bidirectional | GPIO port C bit 2, JTAG TDI input; defaults to JTAG function at reset. |
| 39 | PC1/TMS/SWDIO | bidirectional | GPIO port C bit 1, JTAG TMS and SWDIO; defaults to JTAG function at reset. |
| 40 | PC0/TCK/SWCLK | bidirectional | GPIO port C bit 0, JTAG/SWD clock input; defaults to JTAG function at reset. |
| 41 | PB7/TRST | bidirectional | GPIO port B bit 7, JTAG TRST input; defaults to JTAG function at reset. |
| 42 | PB6/C0+ | bidirectional | GPIO port B bit 6, alternate function analog comparator 0 positive input. |
| 43 | PB5/CCP5 | bidirectional | GPIO port B bit 5, alternate function Capture/Compare/PWM 5. |
| 44 | PB4/C0- | bidirectional | GPIO port B bit 4, alternate function analog comparator 0 negative input. |
| 45 | PD4/CCP0 | bidirectional | GPIO port D bit 4, alternate function Capture/Compare/PWM 0. |
| 46 | PD5/CCP2 | bidirectional | GPIO port D bit 5, alternate function Capture/Compare/PWM 2. |
| 47 | PD6/Fault | bidirectional | GPIO port D bit 6, alternate function PWM Fault input. |
| 48 | PD7/C0o | bidirectional | GPIO port D bit 7, alternate function analog comparator 0 output. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | LQFP-48(7x7) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 48 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating temperature range | -40 | 85 | °C | Op temp, LM3S811-IQN50-C2T orderable (package addendum) | 596 | ||
| Operating frequency | 50 | MHz | 50-MHz operation | 28 |
CAD (KiCad official)
- Symbol:
LM3S811-IQN50-C2T - Footprint:
Package_QFP:LQFP-48_7x7mm_P0.5mm - 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files:
lm3s811-iqn50-c2t-etched.step/lm3s811-iqn50-c2t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm3s811-iqn50-c2t.step/lm3s811-iqn50-c2t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (601 pp, sha256
05f7d689807bb1f2, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).