Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
LM393QT
STMicroelectronics · Comparators · DFN-8(2x2)
LM393QT from STMicroelectronics, in a DFN-8(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Out1 | output | Output of comparator 1, compatible with TTL, DTL, ECL, MOS and CMOS logic, with output short-circuit to ground stated as infinite. |
| 2 | In1- | input | Inverting input of comparator 1; the input common-mode range includes ground and the differential input voltage range equals the supply voltage. |
| 3 | In1+ | input | Non-inverting input of comparator 1; the input common-mode range includes ground. |
| 4 | Vcc- | power_in | Negative supply pin, grounded for single-supply operation (total supply 2 V to 36 V). |
| 5 | In2+ | input | Non-inverting input of comparator 2; the input common-mode range includes ground. |
| 6 | In2- | input | Inverting input of comparator 2; the input common-mode range includes ground and the differential input voltage range equals the supply voltage. |
| 7 | Out2 | output | Output of comparator 2, compatible with TTL, DTL, ECL, MOS and CMOS logic, with output short-circuit to ground stated as infinite. |
| 8 | Vcc+ | power_in | Positive supply pin, 2 V to 36 V above Vcc- (single supply) or ±1 V to ±18 V (split supplies). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | DFN-8(2x2) |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | Vio | 1 | 5 | mV | VCC+ = 5 V, VCC- = 0 V, Tamb = 25 °C | 6 | |
| Input offset voltage over temperature | Vio | 9 | mV | Tmin ≤ Tamb ≤ Tmax | 6 | ||
| Input offset current | Iio | 3 | 50 | nA | VCC+ = 5 V, VCC- = 0 V, Tamb = 25 °C | 6 | |
| Input offset current over temperature | Iio | 150 | nA | Tmin ≤ Tamb ≤ Tmax | 6 | ||
| Input bias current | Iib | 20 | 250 | nA | VCC+ = 5 V, VCC- = 0 V, Tamb = 25 °C | 6 | |
| Input bias current over temperature | Iib | 400 | nA | Tmin ≤ Tamb ≤ Tmax | 6 | ||
| Large signal voltage gain | Avd | 50 | 200 | V/mV | VCC = 15 V, RL = 15 kΩ, Vo = 1 V to 11 V | 6 | |
| Supply current (all comparators) at 5 V | ICC | 0.45 | 1 | mA | VCC = 5 V, no load | 6 | |
| Supply current (all comparators) at 30 V | ICC | 0.6 | 2.5 | mA | VCC = 30 V, no load | 6 | |
| Low-level output voltage | VOL | 80 | 400 | mV | Vid = -1 V, Isink = 4 mA | 6 | |
| Low-level output voltage over temperature | VOL | 700 | mV | Tmin ≤ Tamb ≤ Tmax | 6 | ||
| High-level output current over temperature | IOH | 1 | µA | Tmin ≤ Tamb ≤ Tmax | 6 | ||
| Output sink current | Isink | 6 | 18 | mA | Vid = 1 V, Vo = 1.5 V | 6 | |
| Supply voltage (operating) | VCC | 2 | 36 | V | (VCC +) - (VCC -) | 5 | |
| Common mode input voltage range | Vicm | 0 | V | VCC+ = 30 V, Tamb = 25 °C; max (VCC+) - 1.5 | 5 | ||
| Common mode input voltage range over temperature | Vicm | 0 | V | Tmin ≤ Tamb ≤ Tmax; max (VCC+) - 2 | 5 | ||
| Operating free-air temperature range | Toper | 0 | 70 | °C | LM393, LM393A, LM393W | 5 | |
| Supply voltage | VCC | 36 | V | 4 | |||
| Differential input voltage | Vid | -36 | 36 | V | LM193, LM293, LM393 | 4 | |
| Input voltage | Vin | -0.3 | 36 | V | LM193, LM293, LM393 | 4 | |
| Maximum junction temperature | Tj | 150 | °C | 4 | |||
| Storage temperature range | Tstg | -65 | 150 | °C | 4 | ||
| Thermal resistance junction to ambient | Rthja | 57 | °C/W | DFN8 2x2 | 4 |
CAD (KiCad official)
- Symbol:
LM393QT - Footprint:
Package_DFN_QFN:DFN-8_2x2mm_P0.5mm - 3D model: DFN-8(2x2) (KiCad packages3D, STEP)
- 3D model files:
lm393qt-etched.step/lm393qt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm393qt.step/lm393qt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (18 pp, sha256
fea5a48fa674757b, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).