main
History Download
Ray lm393bidr: laser-etched CAD + chip hero (factory 2.0.0 backfill) 5d0c534

LM393BIDR

Texas Instruments · Comparators · SOIC-8

LM393BIDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 1OUT output Comparator 1 open-collector output. Requires an external pull-up resistor to a positive supply (typically 2 kΩ to 10 kΩ). Output sinks up to 16 mA when active low.
2 1IN- input Comparator 1 inverting input. Common-mode voltage range extends from V- to (V+ - 2 V). Input bias current typically 15 nA.
3 1IN+ input Comparator 1 non-inverting input. Common-mode voltage range extends from V- to (V+ - 2 V). Input bias current typically 15 nA.
4 GND power_in Negative supply / ground pin (V-). Connect to system ground in single-supply operation, or to the negative rail in split-supply operation.
5 2IN+ input Comparator 2 non-inverting input. Common-mode voltage range extends from V- to (V+ - 2 V). Input bias current typically 15 nA.
6 2IN- input Comparator 2 inverting input. Common-mode voltage range extends from V- to (V+ - 2 V). Input bias current typically 15 nA.
7 2OUT output Comparator 2 open-collector output. Requires an external pull-up resistor to a positive supply (typically 2 kΩ to 10 kΩ). Output sinks up to 16 mA when active low.
8 VCC power_in Positive supply pin (V+). Accepts 2.7 V to 36 V single-supply, or ±1.35 V to ±18 V split-supply operation. Bypass with 0.1 µF ceramic to GND close to the pin.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Amplifiers/Comparators
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • LM393BIDR
  • LM393BIDRIDGKR
  • LM393BIDRIPWR

CAD (KiCad official)

  • Symbol: LM393BIDR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: lm393bidr-etched.step / lm393bidr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm393bidr.step / lm393bidr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (56 pp, sha256 dd9f3d029261a161, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF