main
History Download
Ray Initial commit: component/lm392mx 386bbc4

LM392MX

Texas Instruments · Comparators · SOIC-8

LM392MX from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUTPUT A (COMPARATOR) output Open-collector output of the comparator section (Amplifier A); saturation voltage is typically 250 mV (max 400 mV) at ISINK ≤ 4 mA and is compatible with TTL/CMOS logic levels.
2 INVERTING INPUT A input Inverting input of the comparator (Amplifier A); common-mode voltage range extends from ground to V+ − 1.5V and input should not be driven more than 0.3V negative.
3 NON-INVERTING INPUT A input Non-inverting input of the comparator (Amplifier A); common-mode voltage range extends from ground to V+ − 1.5V with input bias current typically 50 nA.
4 GND power_in Ground/negative supply reference pin common to both the comparator and op amp sections.
5 NON-INVERTING INPUT B input Non-inverting input of the internally compensated operational amplifier (Amplifier B); common-mode voltage range extends from ground to V+ − 1.5V.
6 INVERTING INPUT B input Inverting input of the internally compensated operational amplifier (Amplifier B); input bias current typically 50 nA with input offset current typically 5 nA.
7 OUTPUT B (OP AMP) output Output of the operational amplifier (Amplifier B); output voltage swings from 0V to V+ − 1.5V into a 2 kΩ load, sourcing typically 20 mA and sinking typically 10 mA.
8 V+ power_in Positive supply pin; operates from a single supply of 3V to 32V or a dual/split supply of ±1.5V to ±16V, with supply current typically 0.5 mA at V+ = 5V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Amplifiers/Comparators
Pins 8

CAD (KiCad official)

  • Symbol: LM392MX
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: lm392mx-etched.step / lm392mx-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm392mx.step / lm392mx.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (17 pp, sha256 7d8f0540c280a146, retrieved 2026-09-23, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-sonnet-5 (text+vision), consensus claude-opus-4-8 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF