← Commit history

lm3900dr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)

Ray ·975d16178d · ·parent ba3d42b
2 files changed +96−16
package.json+54−14
@@ -53,37 +53,37 @@         "number": "1",         "name": "1IN+",         "type": "input",-        "description": "Noninverting input of amplifier 1; an internal clamp transistor limits negative excursions to about -0.3 V and externally applied negative input current must be limited to approximately -1 mA (-100 \u00b5A at high temperature)."+        "description": "Noninverting input of amplifier 1; an internal clamp transistor limits negative excursions to about -0.3 V and externally applied negative input current must be limited to approximately -1 mA (-100 µA at high temperature)."       },       {         "number": "2",         "name": "2IN+",         "type": "input",-        "description": "Noninverting input of amplifier 2; an internal clamp transistor limits negative excursions to about -0.3 V and externally applied negative input current must be limited to approximately -1 mA (-100 \u00b5A at high temperature)."+        "description": "Noninverting input of amplifier 2; an internal clamp transistor limits negative excursions to about -0.3 V and externally applied negative input current must be limited to approximately -1 mA (-100 µA at high temperature)."       },       {         "number": "3",         "name": "2IN-",         "type": "input",-        "description": "Inverting (current-summing/Norton) input of amplifier 2, presenting an input resistance of about 1 M\u03a9 and combined with the mirrored noninverting-input current to set the output through the external feedback element."+        "description": "Inverting (current-summing/Norton) input of amplifier 2, presenting an input resistance of about 1 MΩ and combined with the mirrored noninverting-input current to set the output through the external feedback element."       },       {         "number": "4",         "name": "2OUT",         "type": "output",-        "description": "Output of amplifier 2, capable of swinging from a low-level output voltage of 0.09-0.2 V (VOL, RL=2 k\u03a9) up to near VCC, with an output resistance of about 8 k\u03a9 and short-circuit protection."+        "description": "Output of amplifier 2, capable of swinging from a low-level output voltage of 0.09-0.2 V (VOL, RL=2 kΩ) up to near VCC, with an output resistance of about 8 kΩ and short-circuit protection."       },       {         "number": "5",         "name": "1OUT",         "type": "output",-        "description": "Output of amplifier 1, capable of swinging from a low-level output voltage of 0.09-0.2 V (VOL, RL=2 k\u03a9) up to near VCC, with an output resistance of about 8 k\u03a9 and short-circuit protection."+        "description": "Output of amplifier 1, capable of swinging from a low-level output voltage of 0.09-0.2 V (VOL, RL=2 kΩ) up to near VCC, with an output resistance of about 8 kΩ and short-circuit protection."       },       {         "number": "6",         "name": "1IN-",         "type": "input",-        "description": "Inverting (current-summing/Norton) input of amplifier 1, presenting an input resistance of about 1 M\u03a9 and combined with the mirrored noninverting-input current to set the output through the external feedback element."+        "description": "Inverting (current-summing/Norton) input of amplifier 1, presenting an input resistance of about 1 MΩ and combined with the mirrored noninverting-input current to set the output through the external feedback element."       },       {         "number": "7",@@ -95,37 +95,37 @@         "number": "8",         "name": "3IN-",         "type": "input",-        "description": "Inverting (current-summing/Norton) input of amplifier 3, presenting an input resistance of about 1 M\u03a9 and combined with the mirrored noninverting-input current to set the output through the external feedback element."+        "description": "Inverting (current-summing/Norton) input of amplifier 3, presenting an input resistance of about 1 MΩ and combined with the mirrored noninverting-input current to set the output through the external feedback element."       },       {         "number": "9",         "name": "3OUT",         "type": "output",-        "description": "Output of amplifier 3, capable of swinging from a low-level output voltage of 0.09-0.2 V (VOL, RL=2 k\u03a9) up to near VCC, with an output resistance of about 8 k\u03a9 and short-circuit protection."+        "description": "Output of amplifier 3, capable of swinging from a low-level output voltage of 0.09-0.2 V (VOL, RL=2 kΩ) up to near VCC, with an output resistance of about 8 kΩ and short-circuit protection."       },       {         "number": "10",         "name": "4OUT",         "type": "output",-        "description": "Output of amplifier 4, capable of swinging from a low-level output voltage of 0.09-0.2 V (VOL, RL=2 k\u03a9) up to near VCC, with an output resistance of about 8 k\u03a9 and short-circuit protection."+        "description": "Output of amplifier 4, capable of swinging from a low-level output voltage of 0.09-0.2 V (VOL, RL=2 kΩ) up to near VCC, with an output resistance of about 8 kΩ and short-circuit protection."       },       {         "number": "11",         "name": "4IN-",         "type": "input",-        "description": "Inverting (current-summing/Norton) input of amplifier 4, presenting an input resistance of about 1 M\u03a9 and combined with the mirrored noninverting-input current to set the output through the external feedback element."+        "description": "Inverting (current-summing/Norton) input of amplifier 4, presenting an input resistance of about 1 MΩ and combined with the mirrored noninverting-input current to set the output through the external feedback element."       },       {         "number": "12",         "name": "4IN+",         "type": "input",-        "description": "Noninverting input of amplifier 4; an internal clamp transistor limits negative excursions to about -0.3 V and externally applied negative input current must be limited to approximately -1 mA (-100 \u00b5A at high temperature)."+        "description": "Noninverting input of amplifier 4; an internal clamp transistor limits negative excursions to about -0.3 V and externally applied negative input current must be limited to approximately -1 mA (-100 µA at high temperature)."       },       {         "number": "13",         "name": "3IN+",         "type": "input",-        "description": "Noninverting input of amplifier 3; an internal clamp transistor limits negative excursions to about -0.3 V and externally applied negative input current must be limited to approximately -1 mA (-100 \u00b5A at high temperature)."+        "description": "Noninverting input of amplifier 3; an internal clamp transistor limits negative excursions to about -0.3 V and externally applied negative input current must be limited to approximately -1 mA (-100 µA at high temperature)."       },       {         "number": "14",@@ -168,6 +168,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "lm3900dr.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          8.7,+          1.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "3b9a775da256c8afcc28dcddfbc2eb3f266107fe61ce8446d96f2c52b6f44a70",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "lm3900dr-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          8.7,+          1.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "a3b6e33c9a0c2b2ed6e595f45fe5b00e74dee5d232a5c73016a26f3a28d710d2",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}
page.json+42−2
@@ -153,7 +153,47 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "lm3900dr.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          8.7,+          1.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "3b9a775da256c8afcc28dcddfbc2eb3f266107fe61ce8446d96f2c52b6f44a70",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "lm3900dr-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          8.7,+          1.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "a3b6e33c9a0c2b2ed6e595f45fe5b00e74dee5d232a5c73016a26f3a28d710d2",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   },   "metadata": {     "specs": {@@ -200,4 +240,4 @@   "visibility": {     "public": true   }-}\ No newline at end of file+}