Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LM3900DR

Texas Instruments · Operational Amplifier · SOIC-14

LM3900DR from Texas Instruments, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 1IN+ input Noninverting input of amplifier 1; an internal clamp transistor limits negative excursions to about -0.3 V and externally applied negative input current must be limited to approximately -1 mA (-100 µA at high temperature).
2 2IN+ input Noninverting input of amplifier 2; an internal clamp transistor limits negative excursions to about -0.3 V and externally applied negative input current must be limited to approximately -1 mA (-100 µA at high temperature).
3 2IN- input Inverting (current-summing/Norton) input of amplifier 2, presenting an input resistance of about 1 MΩ and combined with the mirrored noninverting-input current to set the output through the external feedback element.
4 2OUT output Output of amplifier 2, capable of swinging from a low-level output voltage of 0.09-0.2 V (VOL, RL=2 kΩ) up to near VCC, with an output resistance of about 8 kΩ and short-circuit protection.
5 1OUT output Output of amplifier 1, capable of swinging from a low-level output voltage of 0.09-0.2 V (VOL, RL=2 kΩ) up to near VCC, with an output resistance of about 8 kΩ and short-circuit protection.
6 1IN- input Inverting (current-summing/Norton) input of amplifier 1, presenting an input resistance of about 1 MΩ and combined with the mirrored noninverting-input current to set the output through the external feedback element.
7 GND power_in Ground reference terminal; all device voltage values, except differential input voltages, are specified with respect to this network ground pin.
8 3IN- input Inverting (current-summing/Norton) input of amplifier 3, presenting an input resistance of about 1 MΩ and combined with the mirrored noninverting-input current to set the output through the external feedback element.
9 3OUT output Output of amplifier 3, capable of swinging from a low-level output voltage of 0.09-0.2 V (VOL, RL=2 kΩ) up to near VCC, with an output resistance of about 8 kΩ and short-circuit protection.
10 4OUT output Output of amplifier 4, capable of swinging from a low-level output voltage of 0.09-0.2 V (VOL, RL=2 kΩ) up to near VCC, with an output resistance of about 8 kΩ and short-circuit protection.
11 4IN- input Inverting (current-summing/Norton) input of amplifier 4, presenting an input resistance of about 1 MΩ and combined with the mirrored noninverting-input current to set the output through the external feedback element.
12 4IN+ input Noninverting input of amplifier 4; an internal clamp transistor limits negative excursions to about -0.3 V and externally applied negative input current must be limited to approximately -1 mA (-100 µA at high temperature).
13 3IN+ input Noninverting input of amplifier 3; an internal clamp transistor limits negative excursions to about -0.3 V and externally applied negative input current must be limited to approximately -1 mA (-100 µA at high temperature).
14 VCC power_in Positive supply voltage input, recommended 4.5 V to 32 V for single-supply operation of the LM3900 (absolute maximum 36 V) with a device (four-amplifier) no-load supply current of 6.2 mA typical, 10 mA maximum.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-14
Category Amplifiers/Comparators
Pins 14

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input bias current (inverting input), TA = 25°C IIB 30 200 nA II = 0, TA = 25°C 3
Mirror gain 0.9 1.1 µA/µA II+ = 20 µA to 200 µA 3
Mirror gain, full temperature range 0.9 1.1 µA/µA TA = Full range 3
Change in mirror gain 2 5 % TA = Full range, See Note 4 3
Mirror current 10 500 µA VI+ = VI–, TA = Full range, See Note 4 3
Large-signal differential voltage amplification AVD 1.2 2.8 V/mV VO = 10 V, f = 100 Hz, RL = 10 kΩ 3
Supply current (four amplifiers) ICC 6.2 10 mA No load 3
Short-circuit output current (output internally high) IOS -6 -10 mA II+ = 0, VO = 0, II– = 0 3
Pulldown current 0.5 1.3 mA 3
Supply voltage, single supply VCC 4.5 32 V Single supply 2
Supply voltage, dual supply (positive) VCC+ 2.2 16 V Dual supply 2
Supply voltage, dual supply (negative) VCC– -2.2 -16 V Dual supply 2
Operating free-air temperature TA 0 70 °C 2
Supply voltage VCC 36 V See Note 1 2
Input current 20 mA 2
Operating free-air temperature range TA 0 70 °C 2
Storage temperature range Tstg -65 150 °C 2
Lead temperature 260 °C 1,6 mm (1/16 inch) from case for 10 seconds 2

CAD (KiCad official)

  • Symbol: LM3900DR
  • Footprint: Package_SO:SOIC-14_3.9x8.7mm_P1.27mm
  • 3D model: SOIC-14 (KiCad packages3D, STEP)
  • 3D model files: lm3900dr-etched.step / lm3900dr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm3900dr.step / lm3900dr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (17 pp, sha256 84f315785e7561f3, retrieved 2026-09-23, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF