3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLM3880QMFE-1AE
Texas Instruments · Monitors & Reset Circuits · SOT-23-6
LM3880QMFE-1AE from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Input supply pin, operating from 2.7 V to 5.5 V with absolute maximum of 6 V, and should be placed as close as possible to the input supply. |
| 2 | GND | power_in | Ground reference pin for the sequencer. |
| 3 | EN | input | Precision enable pin with a 1.0 V to 1.4 V threshold (1.25 V typical) and a 7 µA internal pull-up current, rated from -0.3 V to VCC+0.3 V. |
| 4 | FLAG3 | output | Open-drain output flag 3, which must be pulled up and can be tied to a supply up to VCC+0.3 V, with a maximum of 50 mA output current. |
| 5 | FLAG2 | output | Open-drain output flag 2, which must be pulled up and can be tied to a supply up to VCC+0.3 V, with a maximum of 50 mA output current. |
| 6 | FLAG1 | output | Open-drain output flag 1, which must be pulled up and can be tied to a supply up to VCC+0.3 V, with a maximum of 50 mA output current. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-6 |
| Category | Power Supply Chip |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Static operating current | IQ | 25 | 80 | µA | 5 | ||
| FLAGx leakage current | IFLAG | 1 | 20 | nA | VFLAGx = 3.3V | 5 | |
| FLAGx low-level output voltage | VOL | 0.4 | V | IFLAGx = 1.2mA | 5 | ||
| Timer delay 1 accuracy (2 ms option) | td1 | -20 | 20 | % | 2ms timing option | 5 | |
| Timer delay 2 accuracy (2 ms option) | td2 | -20 | 20 | % | 2ms timing option | 5 | |
| Timer delay 3 accuracy (2 ms option) | td3 | -20 | 20 | % | 2ms timing option | 5 | |
| Timer delay 4 accuracy (2 ms option) | td4 | -20 | 20 | % | 2ms timing option | 5 | |
| Timer delay 5 accuracy (2 ms option) | td5 | -20 | 20 | % | 2ms timing option | 5 | |
| Timer delay 6 accuracy (2 ms option) | td6 | -20 | 20 | % | 2ms timing option | 5 | |
| Timer delay ratio, x = 1 or 4 (2 ms option) | (td(x), 400µs)/td(x+1) | 90 | 110 | % | x = 1 or 4, 2ms option | 5 | |
| Timer delay ratio, x = 2 or 5 (2 ms option) | td(x)/td(x+1) | 90 | 110 | % | x = 2 or 5, 2ms option | 5 | |
| EN pin threshold | VEN | 1 | 1.25 | 1.4 | V | 5 | |
| EN pin pull-up current | IEN | 7 | µA | VEN = 0V | 5 | ||
| VCC supply voltage | VCC | -0.3 | 6 | V | 4 | ||
| EN, FLAG1, FLAG2, FLAG3 voltage | -0.3 | 6 | V | 4 | |||
| FLAG maximum output current | 50 | mA | FLAG on | 4 | |||
| Maximum junction temperature | 150 | °C | 4 | ||||
| Lead temperature (soldering) | 260 | °C | 5 s | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| VCC supply voltage (VCC to GND) | VCC | 2.7 | 5.5 | V | VCC to GND | 4 | |
| EN, FLAG1, FLAG2, FLAG3 voltage | -0.3 | V | upper limit VCC+0.3 V | 4 | |||
| Junction temperature | -40 | 125 | °C | 4 | |||
| Junction-to-ambient thermal resistance | RθJA | 187.6 | °C/W | DBV (SOT-23), 6 pins | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 127.4 | °C/W | DBV (SOT-23), 6 pins | 4 | ||
| Junction-to-board thermal resistance | RθJB | 31.5 | °C/W | DBV (SOT-23), 6 pins | 4 | ||
| Junction-to-top characterization parameter | ψJT | 23.3 | °C/W | DBV (SOT-23), 6 pins | 4 | ||
| Junction-to-board characterization parameter | ψJB | 31 | °C/W | DBV (SOT-23), 6 pins | 4 |
CAD (KiCad official)
- Symbol:
LM3880QMFE-1AE - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
lm3880qmfe-1ae-etched.step/lm3880qmfe-1ae-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm3880qmfe-1ae.step/lm3880qmfe-1ae.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (25 pp, sha256
ef69eccfad528334, retrieved 2026-10-28, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).