LM3880QMF-1AC

{
  "slug": "lm3880qmf-1ac",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Supervisor And Reset ICs, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "lm3880qmf-1ac",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lm3880qmf-1ac.kicad_sym",
    "lm3880qmf-1ac.kicad_mod",
    "lm3880qmf-1ac.glb",
    "lm3880qmf-1ac.step",
    "lm3880qmf-1ac.lbr",
    "docs/hero.png",
    "docs/lm3880qmf-1ac-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lm3880qmf-1ac-hero.glb",
    "lm3880qmf-1ac-hero.overlay.json"
  ],
  "component": {
    "mpn": "LM3880QMF-1AC",
    "manufacturer": "Texas Instruments",
    "package": "SOT-23-6",
    "pin_count": 6,
    "category": "Power Management (PMIC)",
    "subcategory": "Supervisor And Reset ICs",
    "datasheet": "https://www.ti.com/cn/lit/gpn/lm3880-q1",
    "parts": {
      "symbol": "lm3880qmf-1ac.kicad_sym",
      "footprint": "lm3880qmf-1ac.kicad_mod",
      "model_3d": "lm3880qmf-1ac-hero.glb",
      "model_3d_plain": "lm3880qmf-1ac.glb",
      "model_3d_step": "lm3880qmf-1ac-etched.step",
      "model_3d_step_plain": "lm3880qmf-1ac.step",
      "lbr": "lm3880qmf-1ac.lbr"
    },
    "distributor_links": {
      "lcsc": "C701872"
    },
    "distributor_check": {
      "checked_at": "2026-10-07T23:42:32Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VCC",
        "type": "power_in",
        "description": "Input supply pin, operating range 2.7 V to 5.5 V relative to GND, with absolute maximum of -0.3 V to 6 V; it should be placed as close as possible to the input supply, and a 0.1 µF ceramic bypass is suggested where noise is present."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference pin for the sequencer and the reference for the VCC supply and EN and FLAG voltage limits."
      },
      {
        "number": "3",
        "name": "EN",
        "type": "input",
        "description": "Precision enable input with a 1.25 V (typical, 1.0 V to 1.4 V) threshold and an internal 7 µA pull-up; it must be kept below the threshold until VCC has risen above its minimum operating voltage, and the datasheet recommends not connecting it directly to VCC."
      },
      {
        "number": "4",
        "name": "FLAG3",
        "type": "output",
        "description": "Open-drain output 3 that needs an external pull-up (typically 100 kΩ) to a supply not exceeding VCC + 0.3 V, with a maximum on-state output current of 50 mA and a low-level output of 0.4 V max at 1.2 mA."
      },
      {
        "number": "5",
        "name": "FLAG2",
        "type": "output",
        "description": "Open-drain output 2 that needs an external pull-up (typically 100 kΩ) to a supply not exceeding VCC + 0.3 V, with a maximum on-state output current of 50 mA and a low-level output of 0.4 V max at 1.2 mA."
      },
      {
        "number": "6",
        "name": "FLAG1",
        "type": "output",
        "description": "Open-drain output 1 that needs an external pull-up (typically 100 kΩ) to a supply not exceeding VCC + 0.3 V, with a maximum on-state output current of 50 mA and a low-level output of 0.4 V max at 1.2 mA."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pinout is taken from the DBV0006A (6-pin SOT-23) package. The ordering addendum (page 21) lists LM38; The datasheet is a Chinese translation of the TI English datasheet (SNVSB87). Pin names and numbers ; The schema has no spec field, so the headline electrical parameters (VCC 2.7–5.5 V, IQ 25 µA typ / 8"
        ],
        "pages_sent": 27,
        "cost_usd": 0.0905,
        "at": "2026-10-07T23:42:17"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/lm3880-q1",
        "pages": 27,
        "sha256": "cff19f703872dfd7",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 6,
        "described": 6,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lm3880qmf-1ac.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "c9fe686b4d1b56927a41fa84a9bc1efb61d8a45a123a3db43bcaa05c2891d635",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lm3880qmf-1ac-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "525c7983647e7cb39a7a2c5044a2fdeb880cdf94cdbb2b1bf431b22c114ebfed",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}