main
Ray
lm385m3x-2-5: laser-etched CAD + chip hero (factory 2.0.0 backfill)
b7a2f63
LM385M3X-2.5
Texas Instruments · Voltage Reference · SOT-23
LM385M3X-2.5 from Texas Instruments, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | + | passive | Positive terminal (cathode) of the shunt voltage reference. Bias with an external current-setting resistor from the supply so that 20 µA <= I_R <= 20 mA; the pin then regulates at ~2.5 V relative to the '-' terminal. |
| 2 | - | passive | Negative terminal (anode) of the shunt voltage reference. Normally returned to circuit ground / common; forms the low side of the 2.5 V reference across pins 1 and 2. |
| 3 | DAP | passive | Die Attach Pad (DAP). Not an electrical function of the reference; the datasheet directs this pin be connected to pin 2 (anode/ground) or left floating. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23 |
| Category | PMIC |
| Pins | 3 |
Ordering variants
Same part, different packaging or reel option.
LM385M3X-2.5LM385M3X-2.5MLM385M3X-2.5ZLM385M3X-2.5HLM385M3X-2.5E
CAD (KiCad official)
- Symbol:
LM385M3X-2.5 - Footprint:
Package_TO_SOT_SMD:SOT-23 - 3D model: SOT-23 (KiCad packages3D, STEP)
- 3D model files:
lm385m3x-2-5-etched.step/lm385m3x-2-5-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm385m3x-2-5.step/lm385m3x-2-5.glbare the bare package body.
3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
lm385m3x-2-5.step |
59 KB | You want the bare part, or you mark your own boards. |
lm385m3x-2-5-etched.step |
2.1 MB | You want the part with LM385M3X-2.5 already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 503 faces against 69 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (25 pp, sha256
04df8bea6c6dffee, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LM385M3X-2.5
**Texas Instruments** · Voltage Reference · SOT-23
LM385M3X-2.5 from Texas Instruments, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | + | passive | Positive terminal (cathode) of the shunt voltage reference. Bias with an external current-setting resistor from the supply so that 20 µA <= I_R <= 20 mA; the pin then regulates at ~2.5 V relative to the '-' terminal. |
| 2 | - | passive | Negative terminal (anode) of the shunt voltage reference. Normally returned to circuit ground / common; forms the low side of the 2.5 V reference across pins 1 and 2. |
| 3 | DAP | passive | Die Attach Pad (DAP). Not an electrical function of the reference; the datasheet directs this pin be connected to pin 2 (anode/ground) or left floating. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23 |
| Category | PMIC |
| Pins | 3 |
## Ordering variants
Same part, different packaging or reel option.
- `LM385M3X-2.5`
- `LM385M3X-2.5M`
- `LM385M3X-2.5Z`
- `LM385M3X-2.5H`
- `LM385M3X-2.5E`
## CAD (KiCad official)
- Symbol: `LM385M3X-2.5`
- Footprint: `Package_TO_SOT_SMD:SOT-23`
- 3D model: SOT-23 (KiCad packages3D, STEP)
- 3D model files: `lm385m3x-2-5-etched.step` / `lm385m3x-2-5-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm385m3x-2-5.step` / `lm385m3x-2-5.glb` are the bare package body.
## 3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
| [`lm385m3x-2-5.step`](lm385m3x-2-5.step) | 59 KB | You want the bare part, or you mark your own boards. |
| [`lm385m3x-2-5-etched.step`](lm385m3x-2-5-etched.step) | 2.1 MB | You want the part with `LM385M3X-2.5` already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a
texture or a decal: 503 faces against 69 in the bare model. It
survives export, section views, and rendering in any CAD tool, and it drops straight
into KiCad or Fusion with no extra setup.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/lm385m3x-2.5.pdf) (25 pp, sha256 `04df8bea6c6dffee`, retrieved 2026-08-17, tier: manufacturer)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lm385m3x-2-5-datasheet.pdf)