Loads on click. Unloads only if this page sits in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads on click. Unloads only if this page sits in the background.

PCB Footprint

Open full view ↗
Loads on click. Unloads only if this page sits in the background.
Loads on click. Unloads only if this page sits in the background.
Download PDF
Contents

README

markdown

LM3724EM5-3.08

Texas Instruments · Supervisor And Reset ICs · SOT-23-5

LM3724EM5-3.08 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Ground reference.
2 GND power_in Ground reference, device substrate; connect to ground.
3 RESET tri_state Active-low open-drain RESET output; remains low while VCC is below reset threshold (3.08V) and for 190 ms after VCC rises above reset threshold.
4 MR input Active-low manual reset input with internal 22 kΩ pull-up; reset asserted when pulled low and remains asserted for 190 ms after MR pin goes high; may be left open.
5 VCC power_in Supply voltage input; VCC range 1.0V to 5.5V nominal 3.3V for this -3.08V threshold variant.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Power Management (PMIC)
Pins 5

CAD (KiCad official)

  • Symbol: LM3724EM5-3.08
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: lm3724em5-3-08-etched.step / lm3724em5-3-08-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm3724em5-3-08.step / lm3724em5-3-08.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (20 pp, sha256 f937964400fa9b9d, retrieved 2026-09-23, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF