main
History Download
Ray lm358st: specified limits as data (metadata.characteristics, 43 rows from the datasheet) 429f1c7

LM358ST

STMicroelectronics · Operational Amplifier · MSOP-8

LM358ST from STMicroelectronics, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Out1 output Output of operational amplifier 1 with voltage swing 0 V to (VCC+ - 1.5 V).
2 In1- input Inverting input of operational amplifier 1 with common-mode input range VCC- - 0.3 V to VCC+ - 1.5 V.
3 In1+ input Non-inverting input of operational amplifier 1 with common-mode input range VCC- - 0.3 V to VCC+ - 1.5 V.
4 Vcc- power_in Negative power supply terminal.
5 In2+ input Non-inverting input of operational amplifier 2 with common-mode input range VCC- - 0.3 V to VCC+ - 1.5 V.
6 In2- input Inverting input of operational amplifier 2 with common-mode input range VCC- - 0.3 V to VCC+ - 1.5 V.
7 Out2 output Output of operational amplifier 2 with voltage swing 0 V to (VCC+ - 1.5 V).
8 Vcc+ power_in Positive power supply terminal with supply voltage range 3 to 30 V.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package MSOP-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (recommended) VCC 3 30 V 5
Operating free air temperature range (LM358) Toper 0 70 °C 5
Common mode input voltage range (recommended) Vicm -0.3 V 5
Supply voltage VCC 32 V Printed as ±16 or 32 V 4
Input voltage Vi 32 V 4
Differential input voltage Vid 32 V 4
Input current Iin 5 mA DC; 50 mA AC (duty cycle = 10 %, T = 1 s) 4
Operating free-air temperature range (LM358) Toper 0 70 °C 4
Storage temperature range Tstg -65 150 °C 4
Maximum junction temperature Tj 150 °C 4
ESD HBM (human body model) 300 V 4
ESD MM (machine model) 200 V 4
ESD CDM (charged device model) 1.5 kV 4
Input offset voltage Vio 2 7 mV 6
Input offset voltage Vio 9 mV Tmin ≤ Tamb ≤ Tmax 6
Input offset voltage drift ΔVio/ΔT 7 30 µV/°C 6
Input offset current Iio 2 30 nA 6
Input offset current Iio 40 nA Tmin ≤ Tamb ≤ Tmax 6
Input offset current drift ΔIio/ΔT 10 300 pA/°C 6
Input bias current Iib 20 150 nA 6
Input bias current Iib 200 nA Tmin ≤ Tamb ≤ Tmax 6
Large signal voltage gain Avd 50 100 V/mV VCC+ = +15 V, RL = 2 kΩ, Vo = 1.4 V to 11.4 V 6
Large signal voltage gain Avd 25 V/mV Tmin ≤ Tamb ≤ Tmax 6
Supply voltage rejection ratio SVR 65 100 dB VCC+ = 5 V to 30 V, Rs ≤ 10 kΩ 6
Supply voltage rejection ratio SVR 65 dB Tmin ≤ Tamb ≤ Tmax 6
Supply current, all amp, no load ICC 0.7 1.2 mA Tmin ≤ Tamb ≤ Tmax; VCC+ = +5 V 6
Supply current, all amp, no load ICC 2 mA Tmin ≤ Tamb ≤ Tmax; VCC+ = +30 V 6
Input common mode voltage range Vicm 0 V VCC+ = +30 V 6
Common mode rejection ratio CMR 70 85 dB Rs ≤ 10 kΩ 6
Common mode rejection ratio CMR 60 dB Tmin ≤ Tamb ≤ Tmax 6
Output current source Isource 20 40 60 mA VCC+ = +15 V, Vo = +2 V, Vid = +1 V 6
Output sink current Isink 10 20 mA VCC+ = +15 V, Vo = +2 V, Vid = -1 V 7
Output sink current Isink 12 50 µA VCC+ = +15 V, Vo = +0.2 V, Vid = -1V 7
High level output voltage VOH 26 27 V RL = 2 kΩ, VCC+ = 30 V 7
High level output voltage VOH 26 V Tmin ≤ Tamb ≤ Tmax 7
High level output voltage VOH 27 28 V RL = 10 kΩ, VCC+ = 30 V 7
High level output voltage VOH 27 V Tmin ≤ Tamb ≤ Tmax 7
Low level output voltage VOL 5 20 mV RL = 10 kΩ 7
Low level output voltage VOL 20 mV Tmin ≤ Tamb ≤ Tmax 7
Slew rate SR 0.3 0.6 V/µs VCC+ = 15 V, Vi = 0.5 to 3 V, RL = 2 kΩ, CL = 100 pF, unity gain 7
Gain bandwidth product GBP 0.7 1.1 MHz VCC+ = 30 V, f = 100 kHz, Vin = 10 mV, RL = 2 kΩ, CL = 100 pF 7
Thermal resistance junction to ambient (MiniSO8) Rthja 190 °C/W MiniSO8; typical value 4
Thermal resistance junction to case (MiniSO8) Rthjc 39 °C/W MiniSO8; typical value 4

CAD (KiCad official)

  • Symbol: LM358ST
  • Footprint: Package_SO:MSOP-8_3x3mm_P0.65mm
  • 3D model: MSOP-8 (KiCad packages3D, STEP)
  • 3D model files: lm358st-etched.step / lm358st-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm358st.step / lm358st.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (23 pp, sha256 b8db7f138bb36dd8, retrieved 2026-09-23, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF