3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLM358S
Shenzhen Fuman · Operational Amplifier · SOP-8
LM358S from Shenzhen Fuman, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTA | output | Output of op-amp A with voltage swing 0 to VCC-1.5V. |
| 2 | INAN | input | Inverting input of op-amp A with common-mode voltage range including ground. |
| 3 | INAP | input | Non-inverting input of op-amp A with common-mode voltage range including ground. |
| 4 | GND | power_in | Power supply negative (ground). |
| 5 | INBP | input | Non-inverting input of op-amp B with common-mode voltage range including ground. |
| 6 | INBN | input | Inverting input of op-amp B with common-mode voltage range including ground. |
| 7 | OUTB | output | Output of op-amp B with voltage swing 0 to VCC-1.5V. |
| 8 | VCC | power_in | Power supply positive with supply voltage range 3V to 20V (single supply) or ±1.5V to ±10V (dual supply). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shenzhen Fuman |
| Package | SOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | Vcc | 20 | V | Ta=25℃ | 1 | ||
| Differential input voltage | VID | -20 | 20 | V | Ta=25℃ | 1 | |
| Input voltage | Vin | -0.3 | 20 | V | Ta=25℃ | 1 | |
| Power dissipation | Pd | 570 | mW | Ta=25℃ | 1 | ||
| Storage ambient temperature | Tstg | -65 | 150 | ℃ | 1 | ||
| Operating ambient temperature | Topr | 0 | 70 | ℃ | 1 | ||
| Single supply voltage range | 3 | 20 | V | Single supply (features list) | 1 | ||
| Dual supply voltage range | -10 | 10 | V | Dual supply ±1.5V~±10V (features list); min shown as -10V, max +10V | 1 | ||
| Input offset voltage | VIO | 3 | 7 | mV | VCM=0~Vcc-1.5, VO(P)=1.4V, Rs=0 | 2 | |
| Input offset current | IIO | 2 | 50 | nA | 2 | ||
| Input bias current | Ib | 20 | 250 | nA | 2 | ||
| Input common-mode voltage range | VI(R) | 0 | V | Vcc=30V | 2 | ||
| Supply current | ICC | 0.8 | 2 | mA | RL=∞, Vcc=30V | 2 | |
| Supply current | ICC | 0.5 | 1.2 | mA | RL=∞, Vcc=5V | 2 | |
| Large-signal voltage gain | GV | 25 | 100 | V/mV | Vcc=15V, RI>2KΩ, VO(P)=1V~11V | 2 | |
| Output voltage high | V(OH) | 26 | V | Vcc=30V, RL=2KΩ | 2 | ||
| Output voltage high | V(OH) | 27 | 28 | V | Vcc=30V, RL=10KΩ | 2 | |
| Output voltage low | V(OL) | 5 | 20 | mV | Vcc=5V, RL=10KΩ | 2 | |
| Common-mode rejection ratio | CMRR | 65 | 80 | dB | 2 | ||
| Power supply rejection ratio | PSRR | 65 | 100 | dB | 2 | ||
| Channel separation | CS | 5 | 20 | mV | f=1KHz~20KHz | 2 | |
| Output short-circuit current to ground | ISC | 40 | 60 | mA | 2 | ||
| Output source current | Isource | 20 | 40 | mA | VI(+)=1V, VI(-)=0, Vcc=15V, Vo(p)=2V | 2 | |
| Output sink current | Isink | 10 | 20 | mA | VI(+)=0, VI(-)=1V, Vcc=15V, Vo(p)=2V | 2 | |
| Output current (high-voltage test) | 12 | 50 | uA | VI(+)=1V, VI(-)=0, Vcc=15V, Vo(p)=200V | 2 |
CAD (KiCad official)
- Symbol:
LM358S - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
lm358s-etched.step/lm358s-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm358s.step/lm358s.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Shenzhen Fuman datasheet (3 pp, sha256
1116e537453c4df7, retrieved 2026-09-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).