Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LM358QT

STMicroelectronics · Operational Amplifier · DFN-8-EP(2x2)

LM358QT from STMicroelectronics, in a DFN-8-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Out1 output Output of op amp 1, which can swing from 0 V to (VCC+ - 1.5 V) with a maximum output current of approximately 40 mA.
2 In1- input Inverting input of op amp 1, with input voltage range -0.3 V to 32 V.
3 In1+ input Non-inverting input of op amp 1, with common-mode range from VCC- to (VCC+ - 1.5 V) at 25 °C.
4 Vcc- power_in Negative supply or ground for single-supply operation.
5 In2+ input Non-inverting input of op amp 2, with common-mode range from VCC- to (VCC+ - 1.5 V) at 25 °C.
6 In2- input Inverting input of op amp 2, with input voltage range -0.3 V to 32 V.
7 Out2 output Output of op amp 2, which can swing from 0 V to (VCC+ - 1.5 V) with a maximum output current of approximately 40 mA.
8 Vcc+ power_in Positive supply, operating range 3 V to 30 V.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package DFN-8-EP(2x2)
Category Amplifiers/Comparators
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (absolute maximum, printed as ±16 or 32) VCC -16 32 V Printed as ±16 or 32 5
Input voltage Vi -0.3 32 V 5
Differential input voltage Vid -32 32 V 5
Input current Iin 5 mA DC 5
Input current Iin 50 mA AC, duty cycle = 10 %, T = 1 s 5
Operating free-air temperature range (LM358) Toper 0 70 °C 5
Storage temperature range Tstg -65 150 °C 5
Maximum junction temperature Tj 150 °C 5
Thermal resistance junction to ambient, DFN8 2x2 Rthja 57 °C/W Typical value 5
ESD human body model HBM 300 V Human body model 5
ESD machine model MM 200 V Machine model 5
ESD charged device model CDM 1.5 kV Charged device model 5
Supply voltage (operating) VCC 3 30 V 6
Operating free air temperature range (LM358) Toper 0 70 °C 6
Input offset voltage Vio 2 7 mV 7
Input offset voltage Vio 9 mV Tmin ≤ Tamb ≤ Tmax 7
Input offset voltage drift ΔVio/ΔT 7 30 µV/°C 7
Input offset current Iio 2 30 nA 7
Input offset current Iio 40 nA Tmin ≤ Tamb ≤ Tmax 7
Input offset current drift ΔIio/ΔT 10 300 pA/°C 7
Input bias current Iib 20 150 nA 7
Input bias current Iib 200 nA Tmin ≤ Tamb ≤ Tmax 7
Large signal voltage gain Avd 50 100 V/mV VCC+ = 15 V, RL = 2 kΩ, Vo = 1.4 V to 11.4 V 7
Large signal voltage gain Avd 25 V/mV Tmin ≤ Tamb ≤ Tmax 7
Supply voltage rejection ratio SVR 65 100 dB VCC+ = 5 V to 30 V, Rs ≤ 10 kΩ 7
Supply voltage rejection ratio SVR 65 dB Tmin ≤ Tamb ≤ Tmax 7
Supply current, all amp, no load ICC 0.7 1.2 mA Tmin ≤ Tamb ≤ Tmax, VCC+ = 5 V 7
Supply current, all amp, no load ICC 2 mA Tmin ≤ Tamb ≤ Tmax, VCC+ = 30 V 7
Common mode rejection ratio CMR 70 85 dB Rs ≤ 10 kΩ 7
Common mode rejection ratio CMR 60 dB Tmin ≤ Tamb ≤ Tmax 7
Output current source Isource 20 40 60 mA VCC+ = 15 V, Vo = 2 V, Vid = 1 V 7
Output sink current Isink 10 20 mA VCC+ = 15 V, Vo = 2 V, Vid = -1 V 7
Output sink current Isink 12 50 µA VCC+ = 15 V, Vo = 0.2 V, Vid = -1 V 7
High level output voltage VOH 26 27 V VCC+ = 30 V, RL = 2 kΩ connected to VCC-, Tamb = 25 °C 8
High level output voltage VOH 26 V VCC+ = 30 V, RL = 2 kΩ connected to VCC-, Tmin ≤ Tamb ≤ Tmax 8
High level output voltage VOH 27 28 V VCC+ = 30 V, RL = 10 kΩ connected to VCC-, Tamb = 25 °C 8
High level output voltage VOH 27 V VCC+ = 30 V, RL = 10 kΩ connected to VCC-, Tmin ≤ Tamb ≤ Tmax 8
High level output voltage VOH 3.5 V VCC+ = 5 V, RL = 2 kΩ connected to VCC-, Tamb = 25 °C 8
High level output voltage VOH 3 V VCC+ = 5 V, RL = 2 kΩ connected to VCC-, Tmin ≤ Tamb ≤ Tmax 8
Low level output voltage VOL 5 20 mV RL = 10 kΩ connected to VCC- 8
Low level output voltage VOL 20 mV Tmin ≤ Tamb ≤ Tmax 8
Slew rate SR 0.3 0.6 V/µs VCC+ = 15 V, Vi = 0.5 to 3 V, RL = 2 kΩ, CL = 100 pF, unity gain 8
Gain bandwidth product GBP 0.7 1.1 MHz VCC+ = 30 V, f = 100 kHz, Vin = 10 mV, RL = 2 kΩ, CL = 100 pF 8
Total harmonic distortion THD 0.02 % f = 1 kHz, Av = 20 dB, RL = 2 kΩ, Vo = 2 Vpp, CL = 100 pF 8
Equivalent input noise voltage en 55 f = 1 kHz, Rs = 100 Ω, VCC+ = 30 V 8
Channel separation Vo1/Vo2 120 dB 1 kHz ≤ f ≤ 20 kHz 8

CAD (KiCad official)

  • Symbol: LM358QT
  • Footprint: Package_DFN_QFN:DFN-8-1EP_2x2mm_P0.5mm_EP0.6x1.2mm
  • 3D model: DFN-8-EP(2x2) (KiCad packages3D, STEP)
  • 3D model files: lm358qt-etched.step / lm358qt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm358qt.step / lm358qt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (25 pp, sha256 40a2550bed90848d, retrieved 2026-10-03, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF