Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LM358DT

STMicroelectronics · Operational Amplifier · SO-8

LM358DT from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Out1 output Output of op-amp channel 1. Push-pull class-AB output stage; can swing from 0 V up to (Vcc+ - 1.5 V). Short-circuit protected.
2 In1- input Inverting input of op-amp channel 1. Input common-mode range includes the negative supply (ground in single-supply operation). Typical input bias current 20 nA; input offset voltage 2 mV.
3 In1+ input Non-inverting input of op-amp channel 1. Input common-mode range includes the negative supply (ground in single-supply operation).
4 Vcc- power_in Negative supply rail / ground. Connect to GND for single-supply operation, or to the negative rail for split-supply operation (±1.5 V to ±16 V).
5 In2+ input Non-inverting input of op-amp channel 2. Input common-mode range includes the negative supply (ground in single-supply operation).
6 In2- input Inverting input of op-amp channel 2. Input common-mode range includes the negative supply (ground in single-supply operation).
7 Out2 output Output of op-amp channel 2. Push-pull class-AB output stage; can swing from 0 V up to (Vcc+ - 1.5 V). Short-circuit protected.
8 Vcc+ power_in Positive supply rail. Single-supply range 3 V to 32 V, or split-supply ±1.5 V to ±16 V. Very low quiescent supply current, independent of supply voltage.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package SO-8
Category Amplifiers/Comparators
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • LM358DT
  • LM358ADT
  • LM358YDT
  • LM358DTLM158DT
  • LM358DTLM258DT
  • LM358DTLM258ADT
  • LM358DTLM258AYDT
  • LM358ST
  • LM358AST
  • LM358DTLM258AST
  • LM358QT
  • LM358DTLM258QT
  • LM358DTLM158QT
  • LM358PT
  • LM358APT
  • LM358DTLM258APT

CAD (KiCad official)

  • Symbol: LM358DT
  • Footprint: Package_SO:TI_SO-PowerPAD-8
  • 3D model: SO-8 (KiCad packages3D, STEP)
  • 3D model files: lm358dt-etched.step / lm358dt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm358dt.step / lm358dt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (25 pp, sha256 40a2550bed90848d, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF