component
LM358DGKR
Public Made by Adomby adom
Texas Instruments Operational Amplifier, VSSOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownLM358DGKR
Texas Instruments · Operational Amplifier · VSSOP-8
LM358DGKR from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT1 | output | First operational amplifier output with voltage swing from approximately 2 V below V+ to 20 mV above V- at 10 kΩ load. |
| 2 | IN1- | input | First operational amplifier inverting input accepting common-mode voltages from V- to V+ - 1.5 V. |
| 3 | IN1+ | input | First operational amplifier non-inverting input accepting common-mode voltages from V- to V+ - 1.5 V. |
| 4 | V- | power_in | Negative supply rail (or ground in single-supply operation) for supply voltage operation range 3 to 30 V. |
| 5 | IN2+ | input | Second operational amplifier non-inverting input accepting common-mode voltages from V- to V+ - 1.5 V. |
| 6 | IN2- | input | Second operational amplifier inverting input accepting common-mode voltages from V- to V+ - 1.5 V. |
| 7 | OUT2 | output | Second operational amplifier output with voltage swing from approximately 2 V below V+ to 20 mV above V- at 10 kΩ load. |
| 8 | V+ | power_in | Positive supply rail for supply voltage operation range 3 to 30 V total from V- to V+. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
LM358DGKR - Footprint:
Package_SO:VSSOP-8_2.3x2mm_P0.5mm - 3D model: VSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
lm358dgkr-etched.step/lm358dgkr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm358dgkr.step/lm358dgkr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (68 pp, sha256
a7974fc478974408, retrieved 2026-09-22, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).