LM3492MH

{
  "slug": "lm3492mh",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments LED Drivers, HTSSOP-20-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "led drivers",
    "lm3492mh",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lm3492mh.kicad_sym",
    "lm3492mh.kicad_mod",
    "lm3492mh.glb",
    "lm3492mh.step",
    "lm3492mh.lbr",
    "docs/hero.png",
    "docs/lm3492mh-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lm3492mh-hero.glb",
    "lm3492mh-hero.overlay.json"
  ],
  "component": {
    "mpn": "LM3492MH",
    "manufacturer": "Texas Instruments",
    "package": "HTSSOP-20-EP",
    "pin_count": 21,
    "category": "LED Drivers",
    "subcategory": "LED Drivers",
    "datasheet": "https://www.ti.com/cn/lit/gpn/lm3492",
    "parts": {
      "symbol": "lm3492mh.kicad_sym",
      "footprint": "lm3492mh.kicad_mod",
      "model_3d": "lm3492mh-hero.glb",
      "model_3d_plain": "lm3492mh.glb",
      "model_3d_step": "lm3492mh-etched.step",
      "model_3d_step_plain": "lm3492mh.step",
      "lbr": "lm3492mh.lbr"
    },
    "distributor_links": {
      "lcsc": "C2879370"
    },
    "distributor_check": {
      "checked_at": "2026-10-12T11:04:49Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "EN",
        "type": "input",
        "description": "Enable pin, internally pulled up; connect to a voltage higher than 1.63 V to provide precision enable for the device."
      },
      {
        "number": "2",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply pin for the device, with an input range of 4.5 V to 65 V."
      },
      {
        "number": "3",
        "name": "SW",
        "type": "input",
        "description": "Switch node, internally connected to the drain of the integrated MOSFET."
      },
      {
        "number": "4",
        "name": "SW",
        "type": "input",
        "description": "Switch node, internally connected to the drain of the integrated MOSFET (pin 4 is part of the merged SW cell in the pin table)."
      },
      {
        "number": "5",
        "name": "VOUT",
        "type": "input",
        "description": "Output voltage sense input used for nearly constant switching frequency control."
      },
      {
        "number": "6",
        "name": "RT",
        "type": "input",
        "description": "An external resistor from the VOUT pin to this pin sets the switching frequency."
      },
      {
        "number": "7",
        "name": "FB",
        "type": "input",
        "description": "Output voltage feedback input connected through a feedback resistor divider; the pin voltage is specified from 1.05 V to 2.5 V."
      },
      {
        "number": "8",
        "name": "GND",
        "type": "power_in",
        "description": "Analog signal ground."
      },
      {
        "number": "9",
        "name": "IOUT2",
        "type": "input",
        "description": "Input of the channel 2 current regulator; the regulated current is programmed through the IREF pin."
      },
      {
        "number": "10",
        "name": "IOUT1",
        "type": "input",
        "description": "Input of the channel 1 current regulator; the regulated current is programmed through the IREF pin."
      },
      {
        "number": "11",
        "name": "CDHC",
        "type": "input",
        "description": "An external capacitor on this pin sets the dynamic headroom control sensitivity, and a 120-µA internal current source charges it at start-up for soft start."
      },
      {
        "number": "12",
        "name": "IREF",
        "type": "input",
        "description": "An external resistor from this pin to ground programs the regulated current of channels 1 and 2."
      },
      {
        "number": "13",
        "name": "COMM",
        "type": "bidirectional",
        "description": "Open-drain bidirectional logic pin used for power-good, overtemperature, IOUT overvoltage and undervoltage indications and for command sending (switching frequency tuning and channel 1 disabling)."
      },
      {
        "number": "14",
        "name": "LGND",
        "type": "power_in",
        "description": "Current regulator ground that must be connected to the GND pin for normal operation; LGND and GND are not internally connected."
      },
      {
        "number": "15",
        "name": "DIM1/CLK",
        "type": "bidirectional",
        "description": "Dimming control of channel 1 (internally pulled low by 5 µA), which also serves as the clock for latching COMM input/output data."
      },
      {
        "number": "16",
        "name": "DIM2",
        "type": "input",
        "description": "Dimming control of channel 2 that turns the channel 2 current regulator on or off; internally pulled low by 5 µA."
      },
      {
        "number": "17",
        "name": "PGND",
        "type": "power_in",
        "description": "Integrated MOSFET power ground that must be connected to the GND pin for normal operation."
      },
      {
        "number": "18",
        "name": "PGND",
        "type": "power_in",
        "description": "Integrated MOSFET power ground that must be connected to the GND pin for normal operation; PGND and GND are not internally connected (pin 18 is part of the merged PGND cell in the pin table)."
      },
      {
        "number": "19",
        "name": "VCC",
        "type": "power_out",
        "description": "LDO regulator output nominally regulated to 5.5 V; connect a capacitor larger than 0.47 µF between VCC and GND."
      },
      {
        "number": "20",
        "name": "ILIM",
        "type": "input",
        "description": "Peak current limit adjust: an external resistor from ILIM to VCC reduces the peak current limit, and tying ILIM to ground gives the maximum current limit."
      },
      {
        "number": "21",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: In the source pin table, pins 4 and 18 have no name of their own; they sit under merged SW (pins 3-4; The exposed pad is labelled DAP rather than a numbered pin. It is included as passive because the da; The datasheet lists SW as direction 'I' even though it is the boost switch node driving the internal",
          "exposed pad 21 added from the footprint",
          "dropped thermal pad ['EP'] absent from footprint"
        ],
        "pages_sent": 11,
        "cost_usd": 0.0692,
        "at": "2026-10-12T11:04:27"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/lm3492",
        "pages": 34,
        "sha256": "7ea739bbe0afd383",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 21,
        "described": 21,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lm3492mh.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.41,
          6.5,
          1.2
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "05ce228ae4b33cb917766038679e7bb6d873d5d11b7b3e0857895c411fc97dc8",
        "checked": "2026-10-12",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lm3492mh-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.41,
          6.5,
          1.2
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "79eef343474b3d19ad5b4174028e5f5862cca7ad0ef3d7f3626b62f3d23a0e97",
        "checked": "2026-10-16",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}