main
Ray Publish 0.1.0 cd3894f
{
  "slug": "lm3492hcqmhx",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments LED Drivers, HTSSOP-20-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "nixie tube driver-led driver",
    "lm3492hcqmhx",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lm3492hcqmhx.kicad_sym",
    "lm3492hcqmhx.kicad_mod",
    "lm3492hcqmhx.glb",
    "lm3492hcqmhx.step",
    "lm3492hcqmhx.lbr",
    "docs/hero.png",
    "docs/lm3492hcqmhx-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lm3492hcqmhx-hero.glb",
    "lm3492hcqmhx-hero.overlay.json"
  ],
  "component": {
    "mpn": "LM3492HCQMHX",
    "manufacturer": "Texas Instruments",
    "package": "HTSSOP-20-EP",
    "pin_count": 21,
    "category": "Nixie Tube Driver/LED Driver",
    "subcategory": "LED Drivers",
    "datasheet": "https://www.ti.com/lit/ds/symlink/lm3492hc.pdf",
    "parts": {
      "symbol": "lm3492hcqmhx.kicad_sym",
      "footprint": "lm3492hcqmhx.kicad_mod",
      "model_3d": "lm3492hcqmhx-hero.glb",
      "model_3d_plain": "lm3492hcqmhx.glb",
      "model_3d_step": "lm3492hcqmhx-etched.step",
      "model_3d_step_plain": "lm3492hcqmhx.step",
      "lbr": "lm3492hcqmhx.lbr"
    },
    "distributor_links": {
      "lcsc": "C701847",
      "digikey": "LM3492HCQMHX/NOPB-ND",
      "mouser": "595-LM3492HCQMHXNOPB"
    },
    "distributor_check": {
      "checked_at": "2026-11-21T01:24:22Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "LM3492HCQMHX/NOPB-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-LM3492HCQMHXNOPB",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "EN",
        "type": "input",
        "description": "Enable input with an internal pullup that must be connected to a voltage higher than 1.63 V to provide precision enable."
      },
      {
        "number": "2",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply voltage pin with an input voltage range from 4.5 V to 65 V."
      },
      {
        "number": "3",
        "name": "SW",
        "type": "output",
        "description": "Switch node internally connected to the drain of the integrated MOSFET."
      },
      {
        "number": "4",
        "name": "SW",
        "type": "output",
        "description": "Switch node internally connected to the drain of the integrated MOSFET."
      },
      {
        "number": "5",
        "name": "VOUT",
        "type": "input",
        "description": "Output voltage sense pin that senses the output voltage for nearly constant switching frequency control."
      },
      {
        "number": "6",
        "name": "RT",
        "type": "input",
        "description": "Frequency control pin where an external resistor from the VOUT pin to this pin sets the switching frequency."
      },
      {
        "number": "7",
        "name": "FB",
        "type": "input",
        "description": "Output voltage feedback pin connected through a feedback resistor divider, with the voltage of this pin from 1.05 V to 2.5 V."
      },
      {
        "number": "8",
        "name": "GND",
        "type": "power_in",
        "description": "Analog signal ground that must be connected to the exposed pad directly beneath the device."
      },
      {
        "number": "9",
        "name": "IOUT2",
        "type": "input",
        "description": "Current regulator input for channel 2 whose regulated current is programmable via the IREF pin."
      },
      {
        "number": "10",
        "name": "IOUT1",
        "type": "input",
        "description": "Current regulator input for channel 1 whose regulated current is programmable via the IREF pin."
      },
      {
        "number": "11",
        "name": "CDHC",
        "type": "input",
        "description": "Dynamic headroom control pin where an external capacitor sets DHC sensitivity and a 12-µA internal source charges it for soft-start."
      },
      {
        "number": "12",
        "name": "IREF",
        "type": "input",
        "description": "Current setting pin where an external resistor to ground programs the regulated current of channels 1 and 2."
      },
      {
        "number": "13",
        "name": "COMM",
        "type": "bidirectional",
        "description": "Open-drain bidirectional logic communication pin used for indications and command sending with an external MCU."
      },
      {
        "number": "14",
        "name": "LGND",
        "type": "power_in",
        "description": "Current regulator ground that must be connected to the GND pin and exposed pad, and is not internally connected to GND."
      },
      {
        "number": "15",
        "name": "DIM1/CLK",
        "type": "bidirectional",
        "description": "Dimming control of channel 1 that is internally pulled low by 5 µA and also serves as the clock for latching COMM input and output data."
      },
      {
        "number": "16",
        "name": "DIM2",
        "type": "input",
        "description": "Dimming control of channel 2 that controls the on and off of the current regulator of channel 2 and is internally pulled low by 5 µA."
      },
      {
        "number": "17",
        "name": "PGND",
        "type": "power_in",
        "description": "Integrated MOSFET ground that must be connected to the GND pin and exposed pad for normal operation and is not internally connected to GND."
      },
      {
        "number": "18",
        "name": "PGND",
        "type": "power_in",
        "description": "Integrated MOSFET ground that must be connected to the GND pin and exposed pad for normal operation and is not internally connected to GND."
      },
      {
        "number": "19",
        "name": "VCC",
        "type": "power_out",
        "description": "Internal LED regulator output nominally regulated to 5.5 V that requires a capacitor of 0.47 µF or larger between VCC and GND."
      },
      {
        "number": "20",
        "name": "ILIM",
        "type": "input",
        "description": "Peak current limit adjust pin where a resistor from ILIM to VCC reduces the limit and connecting ILIM to ground gives the maximum limit."
      },
      {
        "number": "21",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The exposed thermal pad (HTSSOP-20-EP) is listed in the pin functions table on page 4 as 'Exposed Pa; The datasheet pinout applies to the PWP 20-pin HTSSOP package for the LM3492HC/LM3492HC-Q1 family. T"
        ],
        "pages_sent": 10,
        "cost_usd": 0.0255,
        "at": "2026-11-21T01:24:02"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/lm3492hc.pdf",
        "pages": 32,
        "sha256": "b811134d80539a7d",
        "source_tier": "mfr",
        "citation": "Texas Instruments datasheet"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 21,
        "described": 21,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lm3492hcqmhx.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.41,
          6.5,
          1.2
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "044902ed2c49689684bcf07d3ecb36b6e2ce72a7e5bcdc88d1bb8fbd2226a176",
        "checked": "2026-11-21",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lm3492hcqmhx-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.41,
          6.5,
          1.2
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "86cc0b1b694d8ee60f9b4db3a15b40c1b33cf3597346f29f893daaedca38f6e5",
        "checked": "2026-11-21",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}