LM34910SDX

{
  "slug": "lm34910sdx",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments DC-DC Converters, WSON-10-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "lm34910sdx",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lm34910sdx.kicad_sym",
    "lm34910sdx.kicad_mod",
    "lm34910sdx.glb",
    "lm34910sdx.step",
    "lm34910sdx.lbr",
    "docs/hero.png",
    "docs/lm34910sdx-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lm34910sdx-hero.glb",
    "lm34910sdx-hero.overlay.json"
  ],
  "component": {
    "mpn": "LM34910SDX",
    "manufacturer": "Texas Instruments",
    "package": "WSON-10-EP(4x4)",
    "pin_count": 11,
    "category": "Power Management (PMIC)",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://www.ti.com/cn/lit/gpn/lm34910",
    "parts": {
      "symbol": "lm34910sdx.kicad_sym",
      "footprint": "lm34910sdx.kicad_mod",
      "model_3d": "lm34910sdx-hero.glb",
      "model_3d_plain": "lm34910sdx.glb",
      "model_3d_step": "lm34910sdx-etched.step",
      "model_3d_step_plain": "lm34910sdx.step",
      "lbr": "lm34910sdx.lbr"
    },
    "distributor_links": {
      "lcsc": "C2070943",
      "digikey": "LM34910SDX-ND",
      "mouser": "926-LM34910SDX"
    },
    "distributor_check": {
      "checked_at": "2026-10-11T07:02:36Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "LM34910SDX-ND",
        "status": "found",
        "lifecycle": "Obsolete"
      },
      "mouser": {
        "pn": "926-LM34910SDX",
        "status": "found",
        "lifecycle": "Obsolete"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "SW",
        "type": "output",
        "description": "Switching node, internally connected to the buck switch source; connect to the external inductor, diode, and boost capacitor."
      },
      {
        "number": "2",
        "name": "BST",
        "type": "passive",
        "description": "Boost pin for the bootstrap capacitor; connect a 0.022 µF capacitor from SW to this pin, which the internal diode charges during the off-time."
      },
      {
        "number": "3",
        "name": "ISEN",
        "type": "input",
        "description": "Current sense input; the current sense resistor connects from this pin to SGND, and current limit is set at 1.25A."
      },
      {
        "number": "4",
        "name": "SGND",
        "type": "power_in",
        "description": "Sense ground; re-circulating current flows into this pin to the current sense resistor."
      },
      {
        "number": "5",
        "name": "RTN",
        "type": "power_in",
        "description": "Ground for all internal circuitry other than the current limit detection."
      },
      {
        "number": "6",
        "name": "FB",
        "type": "input",
        "description": "Feedback input to the regulation and over-voltage comparators; the regulation level is 2.5V."
      },
      {
        "number": "7",
        "name": "SS",
        "type": "passive",
        "description": "Soft-start pin; an internal 11.5 µA current source charges an external capacitor to 2.5V to provide the soft-start function."
      },
      {
        "number": "8",
        "name": "RON/SD",
        "type": "input",
        "description": "An external resistor from VIN to this pin sets the buck switch on-time; grounding this pin shuts down the regulator."
      },
      {
        "number": "9",
        "name": "VCC",
        "type": "power_out",
        "description": "Start-up regulator output, nominally regulated to 7.0V; an external 8V-14V auxiliary voltage can be connected to reduce internal dissipation."
      },
      {
        "number": "10",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply voltage with a nominal range of 8.0V to 36V; an internal diode connects VCC to VIN."
      },
      {
        "number": "11",
        "name": "EP",
        "type": "passive",
        "description": "Exposed thermal pad on the package bottom, internally connected to the IC substrate; it should be soldered to a ground plane with several vias for heat dissipation."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The exposed thermal pad is not in the numbered pin table (pins 1-10 only). Pad label '11' appears on; The datasheet does not give ERC types. SGND and RTN are typed power_in as ground pins per the KiCad ; BST and SS are typed passive because they connect to external capacitors (0.022 µF and soft-start ca"
        ],
        "pages_sent": 20,
        "cost_usd": 0.0833,
        "at": "2026-10-11T07:02:23"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/lm34910",
        "pages": 20,
        "sha256": "19b89eb15c3826bf",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 11,
        "described": 11,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lm34910sdx.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.0,
          3.95,
          0.8
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "ef3c2f392fea7049285bfc942095cbd03d5bb47d74597dd80d1bc887363be656",
        "checked": "2026-10-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lm34910sdx-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.0,
          3.95,
          0.8
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "7f85e0fe3c016a6b6577badc94f2547440eceb44f13fea343bdfa28257a5e93f",
        "checked": "2026-10-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}