Generated by kicad-footprint-generator · KiCad file format 20260206
LM34910SD
Texas Instruments · DC-DC Converters · WSON-10-EP(4x4)
LM34910SD from Texas Instruments, in a WSON-10-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | output | Switching node, internally connected to the buck switch source, which connects to the external inductor, diode, and boost capacitor. |
| 2 | BST | passive | Boot-strap pin, where a 0.022 µF capacitor connects from SW and is charged through an internal diode during the off-time. |
| 3 | ISEN | input | Current sense input, where the current limit threshold is set at 1.25A. |
| 4 | SGND | power_in | Sense ground through which re-circulating current flows from the free-wheeling diode into the current sense resistor. |
| 5 | RTN | power_in | Ground for all internal circuitry other than the current limit detection. |
| 6 | FB | input | Feedback input to the regulation and over-voltage comparators, with the regulation level at 2.5V. |
| 7 | SS | passive | Soft-start pin, where an internal 11.5 µA current source charges the external capacitor to 2.5V. |
| 8 | RON/SD | input | On-time control set by an external resistor from VIN, and pulling this pin below 0.65V shuts down the regulator. |
| 9 | VCC | power_out | Start-up regulator output nominally regulated to 7.0V, which can be driven by an external auxiliary voltage of 8V to 14V to reduce internal dissipation. |
| 10 | VIN | power_in | Input supply voltage with a nominal range of 8.0V to 36V. |
| 11 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-10-EP(4x4) |
| Category | Power Supply Chip |
| Pins | 11 |
CAD (KiCad official)
- Symbol:
LM34910SD - Footprint:
Package_SON:WSON-10-1EP_4x4mm_P0.8mm_EP2.6x3mm - 3D model: WSON-10-EP(4x4) (KiCad packages3D, STEP)
- 3D model files:
lm34910sd-etched.step/lm34910sd-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm34910sd.step/lm34910sd.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (20 pp, sha256
b714145e14f17bbc, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).