component
LM34910CSDX
Public Made by Adomby adom
Texas Instruments DC-DC Converters, WSON-10-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 17d ago |
| viewers | 17d ago |
| lm34910csdx-etched.glb | 17d ago |
| lm34910csdx-etched.step | 17d ago |
| lm34910csdx-hero.glb | 17d ago |
| lm34910csdx-hero.overlay.json | 17d ago |
| lm34910csdx.glb | 17d ago |
| lm34910csdx.kicad_mod | 17d ago |
| lm34910csdx.kicad_sym | 17d ago |
| lm34910csdx.lbr | 17d ago |
| lm34910csdx.step | 17d ago |
| package.json | 17d ago |
| page.json | 17d ago |
| README.md | 17d ago |
LM34910CSDX
Texas Instruments · DC-DC Converters · WSON-10-EP(4x4)
LM34910CSDX from Texas Instruments, in a WSON-10-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | output | Internally connected to the buck switch source; connect to the external inductor, diode, and boost capacitor. |
| 2 | BST | power_out | Boot-strap pin for the gate-drive capacitor; a 0.022 µF capacitor connects from SW to this pin and is charged by an internal diode during the off-time. |
| 3 | ISEN | input | Current sense input; the current sense resistor connects from this pin to SGND, and the current limit is set at 1.25A. |
| 4 | SGND | power_in | Sense ground; re-circulating current flows into this pin to the current sense resistor. |
| 5 | RTN | power_in | Ground for all internal circuitry other than the current limit detection. |
| 6 | FB | input | Feedback input connected internally to the regulation and over-voltage comparators; the regulation level is 2.5V. |
| 7 | SS | passive | An internal 11.5 µA current source charges an external soft-start capacitor to 2.5V to provide the soft-start function. |
| 8 | RON/SD | input | An external resistor from VIN to this pin sets the buck switch on-time; grounding this pin shuts down the regulator. |
| 9 | VCC | power_out | Output of the start-up regulator, nominally regulated to 7.0V; an external 8V-14V auxiliary voltage can be connected to this pin to reduce internal dissipation. |
| 10 | VIN | power_in | Input supply voltage; nominal input range is 8.0V to 50V. |
| 11 | EP (exposed pad) | passive | Exposed thermal pad on the package bottom, which should be soldered to a ground plane for heat dissipation and is internally connected to the IC substrate. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-10-EP(4x4) |
| Category | Power Supply Chip |
| Pins | 11 |
CAD (KiCad official)
- Symbol:
LM34910CSDX - Footprint:
Package_SON:WSON-10-1EP_4x4mm_P0.8mm_EP2.6x3mm - 3D model: WSON-10-EP(4x4) (KiCad packages3D, STEP)
- 3D model files:
lm34910csdx-etched.step/lm34910csdx-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm34910csdx.step/lm34910csdx.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (21 pp, sha256
9316b05405136b7c, retrieved 2026-10-09, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).