main
History Download
Ray Initial commit: component/lm3488mmx 4c7c186

LM3488MMX

Texas Instruments · DC-DC Converters · VSSOP-8-0.65mm

LM3488MMX from Texas Instruments, in a VSSOP-8-0.65mm. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 ISEN input Current sense input pin for voltage generated across external sense resistor (maximum 600mV absolute rating).
2 COMP output Compensation pin where error amplifier output appears; frequency and loop compensation RC network connected to this pin for control loop stabilization.
3 FB input Feedback pin where divided output voltage is applied; must be adjusted to 1.26V nominal using external resistor divider for voltage regulation.
4 AGND power_in Analog ground pin.
5 PGND power_in Power ground pin.
6 DR output Drive pin of the IC; external low-side N-Channel MOSFET gate must be connected to this pin with voltage swing limited to ≤8V absolute maximum.
7 FA/SYNC/SD input Frequency adjust, synchronization, and shutdown pin; external resistor to ground sets switching frequency from 100kHz to 1MHz, external clock input synchronizes operation, or high signal (≥30µs) enables shutdown mode with <10µA supply current.
8 VIN power_in Power supply input pin for converter operation over supply voltage range 2.97V to 40V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSSOP-8-0.65mm
Category Power Management (PMIC)
Pins 8

CAD (KiCad official)

  • Symbol: LM3488MMX
  • Footprint: Package_SO:VSSOP-8_2.3x2mm_P0.5mm
  • 3D model: VSSOP-8-0.65mm (KiCad packages3D, STEP)
  • 3D model files: lm3488mmx-etched.step / lm3488mmx-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm3488mmx.step / lm3488mmx.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (41 pp, sha256 866c1093f50a00cd, retrieved 2026-09-22, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF