main
Ray
lm3478mmx: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
7d24dc8
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166
{
"slug": "lm3478mmx",
"version": "0.1.0",
"type": "component",
"description": "Texas Instruments AC-DC Controllers and Regulators, VSSOP-8-0.65mm. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
"tags": [
"component",
"pmic",
"lm3478mmx"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"lm3478mmx.kicad_sym",
"lm3478mmx.kicad_mod",
"lm3478mmx.glb",
"lm3478mmx.step",
"lm3478mmx.lbr",
"docs/hero.png",
"docs/lm3478mmx-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"lm3478mmx-etched.step"
],
"visibility": {
"public": true
},
"author": {
"name": "Ray"
},
"component": {
"mpn": "LM3478MMX",
"manufacturer": "Texas Instruments",
"package": "VSSOP-8-0.65mm",
"pin_count": 8,
"category": "AC-DC Controllers and Regulators",
"datasheet": "https://www.ti.com/lit/ds/symlink/lm3478mmx.pdf",
"parts": {
"symbol": "lm3478mmx.kicad_sym",
"footprint": "lm3478mmx.kicad_mod",
"model_3d": "lm3478mmx-etched.glb",
"model_3d_plain": "lm3478mmx.glb",
"model_3d_step": "lm3478mmx-etched.step",
"model_3d_step_plain": "lm3478mmx.step",
"lbr": "lm3478mmx.lbr"
},
"pins": [
{
"number": "1",
"name": "ISEN",
"type": "input",
"description": "Current sense input pin. The voltage generated across an external sense resistor (RSEN) in series with the source of the external N-channel MOSFET is fed into this pin for cycle-by-cycle current-mode control and current limiting. Absolute maximum pin voltage is 500 mV."
},
{
"number": "2",
"name": "COMP",
"type": "output",
"description": "Compensation pin. A series resistor-capacitor network connected from this pin to AGND provides frequency compensation for the current-mode control loop. This pin is the output of the internal transconductance error amplifier."
},
{
"number": "3",
"name": "FB",
"type": "input",
"description": "Feedback pin. Inverting input of the internal error amplifier; the output voltage should be adjusted using an external resistor divider to provide 1.26 V (nominal internal reference) at this pin. Absolute max: -0.4 V to 7 V."
},
{
"number": "4",
"name": "AGND",
"type": "power_in",
"description": "Analog ground pin. Reference for the internal reference, error amplifier, and other small-signal circuitry. Should be tied to PGND at a single point (typically at the input capacitor return) to avoid ground loop noise."
},
{
"number": "5",
"name": "PGND",
"type": "power_in",
"description": "Power ground pin. Return path for the high-current internal MOSFET gate driver (DR pin). Should be routed with a low-impedance connection back to the source of the external MOSFET / sense resistor."
},
{
"number": "6",
"name": "DR",
"type": "output",
"description": "Drive pin. Output of the internal push-pull gate driver (1-A peak current capability) that drives the gate of the external low-side N-channel MOSFET. Pin voltage range is -0.4 V to 8 V (internally clamped for gate protection)."
},
{
"number": "7",
"name": "FA/SD",
"type": "input",
"description": "Frequency-adjust and shutdown pin. A resistor from this pin to AGND sets the internal oscillator frequency between 100 kHz and 1 MHz. Driving this pin high for longer than 30 µs shuts the device down, reducing supply current to less than 10 µA. Absolute max: -0.4 V to 7 V."
},
{
"number": "8",
"name": "VIN",
"type": "power_in",
"description": "Power supply input pin. Provides bias to the internal control circuitry and the gate driver. Recommended operating range 2.97 V to 40 V; absolute maximum 45 V. Should be bypassed with a local ceramic capacitor to PGND."
}
],
"provenance": {
"rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"distributor_links": {
"digikey": false,
"mouser": "926-LM3478MMX"
},
"distributor_check": {
"checked_at": "2026-10-05T19:04:31Z",
"source": "Component Ocean /api/assign-pns + lcsc_map",
"digikey": {
"pn": null,
"status": "no match"
},
"mouser": {
"pn": "926-LM3478MMX",
"status": "found"
}
},
"models_3d": [
{
"file": "lm3478mmx.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
3.1,
2,
0.85
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "353552981eef35cb93635057d4aeb89aef22648c77af6fd095e328bfe6b834bd",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "lm3478mmx-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
3.1,
2,
0.85
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "a12dcfef05be1ed6c58ed09f479ac90ef9f233e48aeed68a7d0a489858c35c7c",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}