main
Ray
lm3478mm: laser-etched CAD + chip hero (factory 2.0.0 backfill)
30408c9
LM3478MM
Texas Instruments · AC-DC Controllers and Regulators · VSSOP-8-0.65mm
LM3478MM from Texas Instruments, in a VSSOP-8-0.65mm. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ISEN | input | Current sense input pin. Voltage generated across an external sense resistor is fed into this pin. Nominal current sense threshold voltage is 156 mV; short-circuit limit is 343 mV (typ). |
| 2 | COMP | output | Compensation pin. A resistor-capacitor combination connected to this pin provides loop compensation for the error amplifier (Gm = 800 μmho typ). |
| 3 | FB | input | Feedback pin. The output voltage should be adjusted using a resistor divider to provide 1.26 V at this pin. FB pin current is 15 nA typ; abs-max range -0.4 V to 7 V. |
| 4 | AGND | power_in | Analog ground pin. Signal ground reference for the internal analog circuitry; should be connected to PGND at a single point near the device. |
| 5 | PGND | power_in | Power ground pin. Return for the internal push-pull driver stage which delivers up to 1 A peak into the external MOSFET gate. |
| 6 | DR | output | Drive pin. The gate of the external N-channel MOSFET should be connected to this pin. Internal push-pull driver with 1 A peak current capability; VDR clamped to 7.2 V when VIN ≥ 7.2 V (else tracks VIN). Abs-max -0.4 V to 8 V. |
| 7 | FA/SD | input | Frequency Adjust and Shutdown pin. A resistor from this pin to ground sets the oscillator frequency (100 kHz to 1 MHz; 40 kΩ ≈ 400 kHz). Pulling this pin high (above shutdown threshold, 1.27 V typ) for longer than 30 μs shuts the device down, drawing <10 μA from the supply. |
| 8 | VIN | power_in | Power supply input pin. Operating range 2.97 V to 40 V (abs-max 45 V). Non-switching supply current 2.7 mA typ; shutdown current ~5 μA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8-0.65mm |
| Category | PMIC |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
LM3478MMLM3478MMXLM3478MMMLM3478MMMX
CAD (KiCad official)
- Symbol:
LM3478MM - Footprint:
Package_SO:VSSOP-8_2.3x2mm_P0.5mm - 3D model: VSSOP-8-0.65mm (KiCad packages3D, STEP)
- 3D model files:
lm3478mm-etched.step/lm3478mm-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm3478mm.step/lm3478mm.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (32 pp, sha256
87ce38ddb225e25f, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LM3478MM
**Texas Instruments** · AC-DC Controllers and Regulators · VSSOP-8-0.65mm
LM3478MM from Texas Instruments, in a VSSOP-8-0.65mm. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ISEN | input | Current sense input pin. Voltage generated across an external sense resistor is fed into this pin. Nominal current sense threshold voltage is 156 mV; short-circuit limit is 343 mV (typ). |
| 2 | COMP | output | Compensation pin. A resistor-capacitor combination connected to this pin provides loop compensation for the error amplifier (Gm = 800 μmho typ). |
| 3 | FB | input | Feedback pin. The output voltage should be adjusted using a resistor divider to provide 1.26 V at this pin. FB pin current is 15 nA typ; abs-max range -0.4 V to 7 V. |
| 4 | AGND | power_in | Analog ground pin. Signal ground reference for the internal analog circuitry; should be connected to PGND at a single point near the device. |
| 5 | PGND | power_in | Power ground pin. Return for the internal push-pull driver stage which delivers up to 1 A peak into the external MOSFET gate. |
| 6 | DR | output | Drive pin. The gate of the external N-channel MOSFET should be connected to this pin. Internal push-pull driver with 1 A peak current capability; VDR clamped to 7.2 V when VIN ≥ 7.2 V (else tracks VIN). Abs-max -0.4 V to 8 V. |
| 7 | FA/SD | input | Frequency Adjust and Shutdown pin. A resistor from this pin to ground sets the oscillator frequency (100 kHz to 1 MHz; 40 kΩ ≈ 400 kHz). Pulling this pin high (above shutdown threshold, 1.27 V typ) for longer than 30 μs shuts the device down, drawing <10 μA from the supply. |
| 8 | VIN | power_in | Power supply input pin. Operating range 2.97 V to 40 V (abs-max 45 V). Non-switching supply current 2.7 mA typ; shutdown current ~5 μA. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8-0.65mm |
| Category | PMIC |
| Pins | 8 |
## Ordering variants
Same part, different packaging or reel option.
- `LM3478MM`
- `LM3478MMX`
- `LM3478MMM`
- `LM3478MMMX`
## CAD (KiCad official)
- Symbol: `LM3478MM`
- Footprint: `Package_SO:VSSOP-8_2.3x2mm_P0.5mm`
- 3D model: VSSOP-8-0.65mm (KiCad packages3D, STEP)
- 3D model files: `lm3478mm-etched.step` / `lm3478mm-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm3478mm.step` / `lm3478mm.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/lm3478mm.pdf) (32 pp, sha256 `87ce38ddb225e25f`, retrieved 2026-08-17, tier: manufacturer)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lm3478mm-datasheet.pdf)