main
Ray Set visibility: public 8f3a2eb
{
  "schema_version": 1,
  "type": "component",
  "slug": "lm3431mhx",
  "title": "LM3431MHX",
  "brief": "Texas Instruments LED Drivers, HTSSOP-28-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "nixie tube driver-led driver",
    "lm3431mhx",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "LM3431MHX",
    "manufacturer": "Texas Instruments",
    "package": "HTSSOP-28-EP",
    "pin_count": 29,
    "category": "Nixie Tube Driver/LED Driver",
    "subcategory": "LED Drivers",
    "datasheet": "https://www.ti.com/cn/lit/gpn/lm3431",
    "parts": {
      "symbol": "lm3431mhx.kicad_sym",
      "footprint": "lm3431mhx.kicad_mod",
      "model_3d": "lm3431mhx-hero.glb",
      "model_3d_plain": "lm3431mhx.glb",
      "model_3d_step": "lm3431mhx-etched.step",
      "model_3d_step_plain": "lm3431mhx.step",
      "lbr": "lm3431mhx.lbr"
    },
    "distributor_links": {
      "lcsc": "C701845",
      "digikey": "2156-LM3431MHX-ND"
    },
    "distributor_check": {
      "checked_at": "2026-10-11T02:24:32Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "2156-LM3431MHX-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VIN",
        "type": "power_in",
        "description": "Power supply input, recommended operating range 4.5 V to 36 V (absolute maximum -0.3 V to 37 V)."
      },
      {
        "number": "2",
        "name": "PGND",
        "type": "power_in",
        "description": "Power ground pin; connect to ground."
      },
      {
        "number": "3",
        "name": "VCC",
        "type": "power_out",
        "description": "Internal reference voltage output (4.80 V to 5.24 V at 25 mA load); bypass to PGND with a minimum 4.7 µF capacitor."
      },
      {
        "number": "4",
        "name": "LG",
        "type": "output",
        "description": "Boost controller gate drive output; connect to the NFET gate."
      },
      {
        "number": "5",
        "name": "CS",
        "type": "input",
        "description": "Boost controller current sense pin; connect to the top side of the boost current sense resistor (absolute maximum -0.3 V to 7 V)."
      },
      {
        "number": "6",
        "name": "ILIM",
        "type": "passive",
        "description": "Boost controller current limit adjust; connect a resistor from this pin to the boost current sense resistor to set the current limit threshold."
      },
      {
        "number": "7",
        "name": "MODE/F",
        "type": "input",
        "description": "Dimming mode selection; pull high for digital PWM control, or connect a capacitor to GND to set the internal dimming frequency (absolute maximum -0.3 V to 7 V)."
      },
      {
        "number": "8",
        "name": "FF",
        "type": "passive",
        "description": "Feedforward pin; connect a resistor to ground to control output over/undershoot during PWM dimming."
      },
      {
        "number": "9",
        "name": "RT",
        "type": "passive",
        "description": "Frequency adjust pin; connect a resistor from this pin to ground to set the boost controller operating frequency (adjustable up to 1 MHz)."
      },
      {
        "number": "10",
        "name": "REF",
        "type": "power_out",
        "description": "Reference voltage output (2.45 V to 2.55 V, 2.5 V typical at IREF < 300 µA) used to provide the REFIN voltage."
      },
      {
        "number": "11",
        "name": "REFIN",
        "type": "input",
        "description": "Sets the LED current feedback voltage; connect to a resistor divider from the REF pin (absolute maximum -0.3 V to 7 V)."
      },
      {
        "number": "12",
        "name": "COMP",
        "type": "output",
        "description": "Output of the error amplifier; connect to the compensation network."
      },
      {
        "number": "13",
        "name": "SGND",
        "type": "power_in",
        "description": "Signal ground pin; connect to ground."
      },
      {
        "number": "14",
        "name": "AFB",
        "type": "input",
        "description": "Anode feedback pin for boost voltage feedback during LED off time; connect to a resistor divider from the output voltage (absolute maximum -0.3 V to 7 V)."
      },
      {
        "number": "15",
        "name": "SS/SH",
        "type": "passive",
        "description": "Soft-start and sample-hold pin; connect a capacitor from this pin to ground to set the soft-start time."
      },
      {
        "number": "16",
        "name": "DLY",
        "type": "passive",
        "description": "Fault delay pin; connect a capacitor from this pin to ground to set the shutdown delay time."
      },
      {
        "number": "17",
        "name": "CFB",
        "type": "input",
        "description": "Cathode feedback pin for boost voltage feedback; connect through a diode to the bottom cathode of each LED string (absolute maximum -0.3 V to 7 V)."
      },
      {
        "number": "18",
        "name": "SC",
        "type": "input",
        "description": "LED short circuit detection pin; connect through a diode to the bottom cathode of each string (absolute maximum -0.3 V to 40 V)."
      },
      {
        "number": "19",
        "name": "LEDOFF",
        "type": "bidirectional",
        "description": "Dual-function pin: controls external drivers during PWM dimming, or connect to ground to enable automatic fault restart."
      },
      {
        "number": "20",
        "name": "SNS3",
        "type": "input",
        "description": "Current feedback for channel 3; connect to the top of the channel 3 current sense resistor (absolute maximum -0.3 V to 7 V)."
      },
      {
        "number": "21",
        "name": "NDRV3",
        "type": "output",
        "description": "Base drive for the channel 3 current regulator; connect to the NPN base or NFET gate."
      },
      {
        "number": "22",
        "name": "SNS2",
        "type": "input",
        "description": "Current feedback for channel 2 (absolute maximum -0.3 V to 7 V)."
      },
      {
        "number": "23",
        "name": "NDRV2",
        "type": "output",
        "description": "Base drive for the channel 2 current regulator; connect to the NPN base or NFET gate."
      },
      {
        "number": "24",
        "name": "SNS1",
        "type": "input",
        "description": "Current feedback for channel 1 (absolute maximum -0.3 V to 7 V)."
      },
      {
        "number": "25",
        "name": "NDRV1",
        "type": "output",
        "description": "Base drive for the channel 1 current regulator; connect to the NPN base or NFET gate."
      },
      {
        "number": "26",
        "name": "THM",
        "type": "input",
        "description": "LED thermal monitor input; when pulled below 1.2 V the device enters standby mode (absolute maximum -0.3 V to 7 V)."
      },
      {
        "number": "27",
        "name": "DIM",
        "type": "input",
        "description": "PWM dimming input accepting a digital PWM or analog voltage level to control LED current duty cycle (absolute maximum -0.3 V to 7 V)."
      },
      {
        "number": "28",
        "name": "EN",
        "type": "input",
        "description": "Enable pin; connect to VIN through a resistor divider to set an external UVLO threshold, pull low to shut down (absolute maximum -0.3 V to 10 V)."
      },
      {
        "number": "29",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Package variant: the MPN LM3431MHX is listed in the TI addendum (page 31) as orderable LM3431MHX/NOP; Pin types are engineering judgment, not printed in the datasheet: passive for resistor/capacitor-set; Exposed pad is not numbered in the datasheet; it is listed as 'EP' and included with the printed lab",
          "exposed pad 29 added from the footprint",
          "dropped thermal pad ['EP'] absent from footprint"
        ],
        "pages_sent": 8,
        "cost_usd": 0.0611,
        "at": "2026-10-11T02:24:19"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/lm3431",
        "pages": 40,
        "sha256": "577125aea071ac7f",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 29,
        "described": 29,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lm3431mhx.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.2,
          9.7,
          1.05
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "ff242f1d3be9d09e7f929707a2c5b1ee974a4f882053b04bcdb1cd2cb21223ef",
        "checked": "2026-10-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lm3431mhx-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.2,
          9.7,
          1.05
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "5bd271f129da7b3697a56c909e9d9a0083e0e717d4061de7226e8a6948f87a80",
        "checked": "2026-10-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "HTSSOP-28-EP",
      "Category": "Nixie Tube Driver/LED Driver",
      "Pins": "29"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "lm3431mhx"
  ],
  "discovery_pitch": "LM3431MHX (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lm3431mhx.kicad_sym",
    "lm3431mhx.kicad_mod",
    "lm3431mhx.glb",
    "lm3431mhx.step",
    "lm3431mhx.lbr",
    "docs/hero.png",
    "docs/lm3431mhx-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lm3431mhx-hero.glb",
    "lm3431mhx-hero.overlay.json"
  ],
  "visibility": {
    "public": true
  }
}