LM3424MHX

{
  "schema_version": 1,
  "type": "component",
  "slug": "lm3424mhx",
  "title": "LM3424MHX",
  "brief": "Texas Instruments LED Drivers, HTSSOP-20-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "nixie tube driver-led driver",
    "lm3424mhx",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "LM3424MHX",
    "manufacturer": "Texas Instruments",
    "package": "HTSSOP-20-EP",
    "pin_count": 21,
    "category": "Nixie Tube Driver/LED Driver",
    "subcategory": "LED Drivers",
    "datasheet": "https://www.ti.com/cn/lit/gpn/lm3424",
    "parts": {
      "symbol": "lm3424mhx.kicad_sym",
      "footprint": "lm3424mhx.kicad_mod",
      "model_3d": "lm3424mhx-hero.glb",
      "model_3d_plain": "lm3424mhx.glb",
      "model_3d_step": "lm3424mhx-etched.step",
      "model_3d_step_plain": "lm3424mhx.step",
      "lbr": "lm3424mhx.lbr"
    },
    "distributor_links": {
      "lcsc": "C701843"
    },
    "distributor_check": {
      "checked_at": "2026-10-08T21:37:11Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VIN",
        "type": "power_in",
        "description": "Input voltage pin (4.5 V to 75 V recommended range); bypass with a 100 nF capacitor to GND placed as close to the device as possible."
      },
      {
        "number": "2",
        "name": "EN",
        "type": "input",
        "description": "Enable input: connect to more than 2.4 V to enable the device, or to less than 0.8 V for low-power shutdown."
      },
      {
        "number": "3",
        "name": "COMP",
        "type": "input",
        "description": "Compensation pin: connect a capacitor to GND to compensate the control loop."
      },
      {
        "number": "4",
        "name": "CSH",
        "type": "input",
        "description": "Current sense high: connect a resistor to GND to set the signal current; can also be used for analog dimming."
      },
      {
        "number": "5",
        "name": "RT",
        "type": "input",
        "description": "Resistor timing: connect a resistor to GND to set the switching frequency; can also be used to synchronize to an external clock."
      },
      {
        "number": "6",
        "name": "nDIM",
        "type": "input",
        "description": "Dimming input and under-voltage protection: connect a PWM signal for dimming and/or a resistor divider from VIN to program input UVLO (1.24 V threshold)."
      },
      {
        "number": "7",
        "name": "SS",
        "type": "input",
        "description": "Soft-start: connect a capacitor to GND to extend start-up time."
      },
      {
        "number": "8",
        "name": "TGAIN",
        "type": "input",
        "description": "Temperature foldback gain: connect a resistor to GND to set the foldback slope."
      },
      {
        "number": "9",
        "name": "TSENSE",
        "type": "input",
        "description": "Temperature sense input: connect a resistor/thermistor divider from VS to sense temperature."
      },
      {
        "number": "10",
        "name": "TREF",
        "type": "input",
        "description": "Temperature foldback reference: connect a resistor divider from VS to set the foldback reference voltage."
      },
      {
        "number": "11",
        "name": "VS",
        "type": "power_out",
        "description": "Voltage reference output: provides a 2.45 V reference for the temperature foldback circuit and other external circuitry."
      },
      {
        "number": "12",
        "name": "OVP",
        "type": "input",
        "description": "Over-voltage protection: connect a resistor divider from VO to program output over-voltage lockout (1.24 V threshold)."
      },
      {
        "number": "13",
        "name": "DDRV",
        "type": "output",
        "description": "Dimming gate drive output: connect to the gate of the dimming MOSFET."
      },
      {
        "number": "14",
        "name": "GND",
        "type": "power_in",
        "description": "Ground: connect to DAP to provide proper system GND."
      },
      {
        "number": "15",
        "name": "GATE",
        "type": "output",
        "description": "Main gate drive output: connect to the gate of the main switching MOSFET; 2-Ω, 1-A peak gate driver."
      },
      {
        "number": "16",
        "name": "VCC",
        "type": "power_out",
        "description": "Internal regulator output: bypass with a 2.2 µF to 3.3 µF ceramic capacitor to GND."
      },
      {
        "number": "17",
        "name": "IS",
        "type": "input",
        "description": "Main switch current sense: connect to the drain of the main N-channel MOSFET for RDS-ON sensing, or to a sense resistor in the source of the same device."
      },
      {
        "number": "18",
        "name": "SLOPE",
        "type": "input",
        "description": "Slope compensation: connect a resistor to GND to set the slope of the additional ramp."
      },
      {
        "number": "19",
        "name": "HSN",
        "type": "input",
        "description": "LED current sense negative: connect through a series resistor to the LED current sense resistor (negative side)."
      },
      {
        "number": "20",
        "name": "HSP",
        "type": "input",
        "description": "LED current sense positive: connect through a series resistor to the LED current sense resistor (positive side)."
      },
      {
        "number": "21",
        "name": "DAP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The top-view pin drawing text on page 3 is scrambled in extraction, so the pin-to-number mapping was; The exposed pad is listed in the table as 'DAP' with no numeric pin number, so it is reported as 'DA; The pinout is for the HTSSOP (PWP) 20-pin package, which the orderable addendum (page 64) lists for ",
          "exposed pad 21 added from the footprint",
          "dropped thermal pad ['EP'] absent from footprint"
        ],
        "pages_sent": 10,
        "cost_usd": 0.0756,
        "at": "2026-10-08T21:35:59"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/lm3424",
        "pages": 72,
        "sha256": "487cc060dc61c0aa",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 21,
        "described": 21,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lm3424mhx.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.41,
          6.5,
          1.2
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "65ae35b3bee939fc163a851ca7417cf5c32a596e2232eeba3d9e1085dc290ba7",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lm3424mhx-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.41,
          6.5,
          1.2
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "ec4322e52acdc4c1b46197be214614fb7807d6b16bfe507e3c470942d7753bf1",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "HTSSOP-20-EP",
      "Category": "Nixie Tube Driver/LED Driver",
      "Pins": "21"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "lm3424mhx"
  ],
  "discovery_pitch": "LM3424MHX (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lm3424mhx.kicad_sym",
    "lm3424mhx.kicad_mod",
    "lm3424mhx.glb",
    "lm3424mhx.step",
    "lm3424mhx.lbr",
    "docs/hero.png",
    "docs/lm3424mhx-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lm3424mhx-hero.glb",
    "lm3424mhx-hero.overlay.json"
  ],
  "visibility": {
    "public": true
  }
}