main
Ray lm3421mhx: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) c0a0db9
{
  "schema_version": 1,
  "type": "component",
  "slug": "lm3421mhx",
  "title": "LM3421MHX",
  "brief": "Texas Instruments LED Drivers, TSSOP-16-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "led drivers",
    "lm3421mhx",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "LM3421MHX",
    "manufacturer": "Texas Instruments",
    "package": "TSSOP-16-EP",
    "pin_count": 17,
    "category": "LED Drivers",
    "subcategory": "LED Drivers",
    "datasheet": "https://www.ti.com/cn/lit/gpn/lm3421",
    "parts": {
      "symbol": "lm3421mhx.kicad_sym",
      "footprint": "lm3421mhx.kicad_mod",
      "model_3d": "lm3421mhx-etched.glb",
      "model_3d_plain": "lm3421mhx.glb",
      "model_3d_step": "lm3421mhx-etched.step",
      "model_3d_step_plain": "lm3421mhx.step",
      "lbr": "lm3421mhx.lbr"
    },
    "distributor_links": {
      "lcsc": "C93955"
    },
    "distributor_check": {
      "checked_at": "2026-09-27T11:00:47Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VIN",
        "type": "power_in",
        "description": "Input voltage supply from 4.5V to 75V; bypass with 100-nF capacitor to AGND as close to the device as possible."
      },
      {
        "number": "2",
        "name": "EN",
        "type": "input",
        "description": "Enable pin with 2.4V logic threshold; connect to AGND for zero-current shutdown or apply more than 2.4V to enable."
      },
      {
        "number": "3",
        "name": "COMP",
        "type": "input",
        "description": "Compensation input; connect capacitor to AGND to set control loop compensation."
      },
      {
        "number": "4",
        "name": "CSH",
        "type": "input",
        "description": "Current sense high input; connect resistor to AGND to set signal current or use as analog dimming control with potentiometer."
      },
      {
        "number": "5",
        "name": "RCT",
        "type": "input",
        "description": "Resistor-capacitor timing input; external RC network sets predictive off-time and switching frequency."
      },
      {
        "number": "6",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground; connect to PGND through DAP copper pad to provide ground return for CSH, COMP, RCT, and related analog circuits."
      },
      {
        "number": "7",
        "name": "OVP",
        "type": "input",
        "description": "Overvoltage protection input with 1.24V threshold; connect resistor divider from output voltage to program OVLO trip point."
      },
      {
        "number": "8",
        "name": "nDIM",
        "type": "input",
        "description": "Dimming input and undervoltage protection with 1.24V threshold; accepts PWM signal for dimming or resistor divider for UVLO programming."
      },
      {
        "number": "9",
        "name": "DDRV",
        "type": "output",
        "description": "Dim gate drive output; driven from internal PWM logic to control dimming MOSFET gate, sourcing 13.5Ω and sinking 3.5Ω typical."
      },
      {
        "number": "10",
        "name": "PGND",
        "type": "power_in",
        "description": "Power ground; connect to AGND through DAP copper pad to provide ground return for GATE and DDRV driver outputs."
      },
      {
        "number": "11",
        "name": "GATE",
        "type": "output",
        "description": "Main gate drive output; connects to main power switch MOSFET gate, sourcing 2Ω and sinking 1.3Ω typical at 1A peak."
      },
      {
        "number": "12",
        "name": "VCC",
        "type": "power_out",
        "description": "Internal regulator output nominally 6.9V (min 6.3V, max 7.35V); bypass with 2.2-µF to 3.3-µF ceramic capacitor to PGND."
      },
      {
        "number": "13",
        "name": "IS",
        "type": "input",
        "description": "Main switch current sense input; connect to MOSFET drain for RDS-ON sensing or to source-side sense resistor for cycle-by-cycle current limit at 245mV threshold."
      },
      {
        "number": "14",
        "name": "RPD",
        "type": "output",
        "description": "Resistor pulldown open-drain output; connects bottom of external resistor dividers to ground for zero-current shutdown with 145Ω pulldown resistance typical."
      },
      {
        "number": "15",
        "name": "HSP",
        "type": "input",
        "description": "LED current sense positive input; connect through series resistor to high side of LED string sense resistor for high-side differential current sensing."
      },
      {
        "number": "16",
        "name": "HSN",
        "type": "input",
        "description": "LED current sense negative input; connect through series resistor to low side of LED string sense resistor for high-side differential current sensing."
      },
      {
        "number": "17",
        "name": "DAP",
        "type": "power_in",
        "description": "Die attach pad thermal connection on bottom of IC; star ground connecting AGND and PGND for low-impedance power/ground return."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-4-6",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: AGND description in datasheet mentions TIMR for ground return, but TIMR pin is not present on the 16; DAP (pin 17) is the thermal pad and may not be explicitly printed as a pin number on the physical pa"
        ],
        "pages_sent": 79,
        "cost_usd": 0.721,
        "at": "2026-09-27T11:00:29"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/lm3421",
        "pages": 79,
        "sha256": "37e8739d38bb6fd4",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 17,
        "described": 17,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lm3421mhx.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          5,
          1.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "7982746831c0bd23f4690608869ad67776faae5c762fb0376666126a3998921b",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lm3421mhx-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          5,
          1.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "bcfa0a4d17eec1a4daa14184fe4fbd440c9ba7128d27d4bcb61b30857407fbed",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "TSSOP-16-EP",
      "Category": "LED Drivers",
      "Pins": "17"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "lm3421mhx"
  ],
  "discovery_pitch": "LM3421MHX (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lm3421mhx.kicad_sym",
    "lm3421mhx.kicad_mod",
    "lm3421mhx.glb",
    "lm3421mhx.step",
    "lm3421mhx.lbr",
    "docs/hero.png",
    "docs/lm3421mhx-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  }
}