Loads on click. Unloads only if this page sits in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads on click. Unloads only if this page sits in the background.

PCB Footprint

Open full view ↗
Loads on click. Unloads only if this page sits in the background.
Loads on click. Unloads only if this page sits in the background.
Download PDF
Contents

README

markdown

LM3410YMFX

Texas Instruments · LED Drivers · SOT-23-5

LM3410YMFX from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SW output Output switch pin that connects to the inductor and the output diode.
2 GND power_in Signal and power ground pin; place the bottom resistor of the feedback network as close as possible to this pin.
3 FB input Feedback pin; connect an external resistor to it to set the output current.
4 DIM input Dimming and shutdown control input where logic high enables operation at 0% to 100% duty cycle; do not let this pin float or allow it to exceed VIN + 0.3 V.
5 VIN power_in Supply voltage pin for the power stage and the input supply voltage.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category LED Drivers
Pins 5

CAD (KiCad official)

  • Symbol: LM3410YMFX
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: lm3410ymfx-etched.step / lm3410ymfx-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm3410ymfx.step / lm3410ymfx.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (57 pp, sha256 0311b7eeee2c8ced, retrieved 2026-10-07, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF