main
Ray
Publish 0.1.0
1d89e19
LM3410XMF
Texas Instruments · LED Drivers · SOT-23-5
LM3410XMF from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | output | Output switch pin that connects to the inductor and output diode; the datasheet's absolute maximum rating for SW is -0.5 V to 26.5 V. |
| 2 | GND | power_in | Signal and power ground pin, where the bottom resistor of the feedback network should be placed as close as possible. |
| 3 | FB | input | Feedback pin connected to an external resistor that sets the output current; the absolute maximum rating for FB is -0.5 V to 3 V. |
| 4 | DIM | input | Dimming and shutdown control input where logic high enables operation and duty cycle runs from 0% to 100%, and it must not float or exceed VIN + 0.3 V. |
| 5 | VIN | power_in | Supply voltage pin for the power stage and input supply voltage, with a recommended input range of 2.7 V to 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Display Modules / LED Drivers / Display Drivers |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Feedback voltage | VFB | 178 | 190 | 202 | mV | 5 | |
| Feedback input bias current | IFB | 0.1 | 1 | µA | 5 | ||
| Switching frequency (LM3410X) | fSW | 1200 | 1600 | 2000 | kHz | LM3410X | 5 |
| Maximum duty cycle (LM3410X) | DMAX | 88 | 92 | % | LM3410X | 5 | |
| Switch on resistance (SOT-23) | RDS(ON) | 170 | 330 | mΩ | MSOP and SOT-23 | 5 | |
| Switch current limit | ICL | 2.1 | 2.8 | A | 5 | ||
| Quiescent current (switching), LM3410X | IQ | 7 | 11 | mA | LM3410X, VFB = 0.25 V | 5 | |
| Undervoltage lockout, VIN rising | UVLO | 2.3 | 2.65 | V | VIN rising | 5 | |
| Undervoltage lockout, VIN falling | UVLO | 1.7 | 1.9 | V | VIN falling | 5 | |
| Input voltage (VIN pin) | VIN | 2.7 | 5.5 | V | 4 | ||
| DIM control input voltage | VDIM | 0 | V | Maximum equals VIN | 4 | ||
| Switch output voltage | VSW | 3 | 24 | V | 4 | ||
| Operating junction temperature | TJ | -40 | 125 | °C | 4 | ||
| Power dissipation (internal), SOT-23 | 400 | mW | SOT-23 | 4 | |||
| Input voltage VIN | VIN | -0.5 | 7 | V | 4 | ||
| Switch voltage SW | SW | -0.5 | 26.5 | V | 4 | ||
| Feedback voltage FB | FB | -0.5 | 3 | V | 4 | ||
| DIM voltage | DIM | -0.5 | 7 | V | 4 | ||
| Operating junction temperature | TJ | 150 | °C | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Junction-to-ambient thermal resistance (SOT-23, 0 LFPM) | RθJA | 164.2 | °C/W | 0 LFPM air flow, DBV (SOT-23) | 4 | ||
| Junction-to-case (top) thermal resistance (SOT-23) | RθJC(top) | 115.3 | °C/W | DBV (SOT-23) | 4 | ||
| Junction-to-board thermal resistance (SOT-23) | RθJB | 27 | °C/W | DBV (SOT-23) | 4 | ||
| Junction-to-top characterization parameter (SOT-23) | ψJT | 12.8 | °C/W | DBV (SOT-23) | 4 | ||
| Junction-to-board characterization parameter (SOT-23) | ψJB | 26.5 | °C/W | DBV (SOT-23) | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | For 5-pin SOT-23 package typical applications, RθJA numbers range from 164.2°C/W, and RθJC varies from 115.3°C/W. These values are for PCBs with two and four layer boards with 0.5 oz copper, with two | 40 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
LM3410XMF - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
lm3410xmf-etched.step/lm3410xmf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm3410xmf.step/lm3410xmf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (57 pp, sha256
0311b7eeee2c8ced, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
# LM3410XMF
**Texas Instruments** · LED Drivers · SOT-23-5
LM3410XMF from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | output | Output switch pin that connects to the inductor and output diode; the datasheet's absolute maximum rating for SW is -0.5 V to 26.5 V. |
| 2 | GND | power_in | Signal and power ground pin, where the bottom resistor of the feedback network should be placed as close as possible. |
| 3 | FB | input | Feedback pin connected to an external resistor that sets the output current; the absolute maximum rating for FB is -0.5 V to 3 V. |
| 4 | DIM | input | Dimming and shutdown control input where logic high enables operation and duty cycle runs from 0% to 100%, and it must not float or exceed VIN + 0.3 V. |
| 5 | VIN | power_in | Supply voltage pin for the power stage and input supply voltage, with a recommended input range of 2.7 V to 5.5 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Display Modules / LED Drivers / Display Drivers |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Feedback voltage | VFB | 178 | 190 | 202 | mV | | 5 |
| Feedback input bias current | IFB | | 0.1 | 1 | µA | | 5 |
| Switching frequency (LM3410X) | fSW | 1200 | 1600 | 2000 | kHz | LM3410X | 5 |
| Maximum duty cycle (LM3410X) | DMAX | 88 | | 92 | % | LM3410X | 5 |
| Switch on resistance (SOT-23) | RDS(ON) | | 170 | 330 | mΩ | MSOP and SOT-23 | 5 |
| Switch current limit | ICL | 2.1 | 2.8 | | A | | 5 |
| Quiescent current (switching), LM3410X | IQ | | 7 | 11 | mA | LM3410X, VFB = 0.25 V | 5 |
| Undervoltage lockout, VIN rising | UVLO | 2.3 | | 2.65 | V | VIN rising | 5 |
| Undervoltage lockout, VIN falling | UVLO | 1.7 | | 1.9 | V | VIN falling | 5 |
| Input voltage (VIN pin) | VIN | 2.7 | | 5.5 | V | | 4 |
| DIM control input voltage | VDIM | 0 | | | V | Maximum equals VIN | 4 |
| Switch output voltage | VSW | 3 | | 24 | V | | 4 |
| Operating junction temperature | TJ | -40 | | 125 | °C | | 4 |
| Power dissipation (internal), SOT-23 | | | | 400 | mW | SOT-23 | 4 |
| Input voltage VIN | VIN | -0.5 | | 7 | V | | 4 |
| Switch voltage SW | SW | -0.5 | | 26.5 | V | | 4 |
| Feedback voltage FB | FB | -0.5 | | 3 | V | | 4 |
| DIM voltage | DIM | -0.5 | | 7 | V | | 4 |
| Operating junction temperature | TJ | | | 150 | °C | | 4 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 4 |
| Junction-to-ambient thermal resistance (SOT-23, 0 LFPM) | RθJA | | 164.2 | | °C/W | 0 LFPM air flow, DBV (SOT-23) | 4 |
| Junction-to-case (top) thermal resistance (SOT-23) | RθJC(top) | | 115.3 | | °C/W | DBV (SOT-23) | 4 |
| Junction-to-board thermal resistance (SOT-23) | RθJB | | 27 | | °C/W | DBV (SOT-23) | 4 |
| Junction-to-top characterization parameter (SOT-23) | ψJT | | 12.8 | | °C/W | DBV (SOT-23) | 4 |
| Junction-to-board characterization parameter (SOT-23) | ψJB | | 26.5 | | °C/W | DBV (SOT-23) | 4 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | | For 5-pin SOT-23 package typical applications, RθJA numbers range from 164.2°C/W, and RθJC varies from 115.3°C/W. These values are for PCBs with two and four layer boards with 0.5 oz copper, with two | 40 |
## CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol: `LM3410XMF`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `lm3410xmf-etched.step` / `lm3410xmf-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm3410xmf.step` / `lm3410xmf.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/lm3410.pdf) (57 pp, sha256 `0311b7eeee2c8ced`, retrieved 2026-11-13, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
[Datasheet PDF](docs/lm3410xmf-datasheet.pdf)