main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs lm3409myx: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers lm3409myx: viewers · Ray
lm3409myx-etched.fit.json lm3409myx: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lm3409myx-etched.glb lm3409myx: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lm3409myx-etched.step lm3409myx: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lm3409myx.glb Publish 0.1.0 · Ray
lm3409myx.kicad_mod Publish 0.1.0 · Ray
lm3409myx.kicad_sym Publish 0.1.0 · Ray
lm3409myx.lbr Publish 0.1.0 · Ray
lm3409myx.step Publish 0.1.0 · Ray
package.json lm3409myx: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json lm3409myx: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/lm3409myx · Ray

LM3409MYX

Texas Instruments · LED Drivers · MSOP-10-EP

LM3409MYX from Texas Instruments, in a MSOP-10-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 UVLO input Undervoltage lockout input requiring resistor divider from VIN and GND with turn-on threshold of 1.24 V and hysteresis provided by 22 µA current source.
2 IADJ input Analog LED current adjust input accepting voltage 0-1.24 V, external resistor to GND, or open connection for programmable current sense threshold.
3 EN input Enable and PWM dimming input with rising threshold 1.74 V, falling threshold 0.5 V, and 420 mV hysteresis for low-power shutdown control.
4 COFF input Off-time programming input with external RC network (resistor from output voltage VO and capacitor to GND) setting switching frequency.
5 GND power_in System ground reference connection.
6 PGATE output P-channel MOSFET gate drive output with 2-Ω typical source and sink resistance at 50 mA.
7 CSN input Negative current sense input for high-side differential current measurement; connect to negative terminal of external sense resistor.
8 CSP input Positive current sense input for high-side differential current measurement; connect to positive terminal of sense resistor and VIN.
9 VCC power_out VIN-referenced linear regulator output providing 5.5-6.5 V (typical 6 V) for P-channel MOSFET gate drive; requires 1 µF minimum ceramic bypass capacitor to VIN.
10 VIN power_in Input supply voltage ranging 6 V to 42 V for LM3409 standard variant.
11 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package MSOP-10-EP
Category LED Drivers
Pins 11

CAD (KiCad official)

  • Symbol: LM3409MYX
  • Footprint: Package_SO:MSOP-10-1EP_3x3mm_P0.5mm_EP1.68x1.88mm
  • 3D model: MSOP-10-EP (KiCad packages3D, STEP)
  • 3D model files: lm3409myx-etched.step / lm3409myx-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm3409myx.step / lm3409myx.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (47 pp, sha256 7745578a43302ee7, retrieved 2026-09-26, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF