← Commit history

Initial commit: component/lm3409myx

Ray ·7d4f8aa933 ·
2 files changed +221
README.mdadded+47
@@ -0,0 +1,47 @@+# LM3409MYX++**Texas Instruments** · LED Drivers · MSOP-10-EP++LM3409MYX from Texas Instruments, in a MSOP-10-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | UVLO | input | Undervoltage lockout input requiring resistor divider from VIN and GND with turn-on threshold of 1.24 V and hysteresis provided by 22 µA current source. |+| 2 | IADJ | input | Analog LED current adjust input accepting voltage 0-1.24 V, external resistor to GND, or open connection for programmable current sense threshold. |+| 3 | EN | input | Enable and PWM dimming input with rising threshold 1.74 V, falling threshold 0.5 V, and 420 mV hysteresis for low-power shutdown control. |+| 4 | COFF | input | Off-time programming input with external RC network (resistor from output voltage VO and capacitor to GND) setting switching frequency. |+| 5 | GND | power_in | System ground reference connection. |+| 6 | PGATE | output | P-channel MOSFET gate drive output with 2-Ω typical source and sink resistance at 50 mA. |+| 7 | CSN | input | Negative current sense input for high-side differential current measurement; connect to negative terminal of external sense resistor. |+| 8 | CSP | input | Positive current sense input for high-side differential current measurement; connect to positive terminal of sense resistor and VIN. |+| 9 | VCC | power_out | VIN-referenced linear regulator output providing 5.5-6.5 V (typical 6 V) for P-channel MOSFET gate drive; requires 1 µF minimum ceramic bypass capacitor to VIN. |+| 10 | VIN | power_in | Input supply voltage ranging 6 V to 42 V for LM3409 standard variant. |+| 11 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | MSOP-10-EP |+| Category | LED Drivers |+| Pins | 11 |++## CAD (KiCad official)++- Symbol: `LM3409MYX`+- Footprint: `Package_SO:MSOP-10-1EP_3x3mm_P0.5mm_EP1.68x1.88mm`+- 3D model: MSOP-10-EP (KiCad packages3D, STEP)+- 3D model files: `lm3409myx-etched.step` / `lm3409myx-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm3409myx.step` / `lm3409myx.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lm3409) (47 pp, sha256 `7745578a43302ee7`, retrieved 2026-09-26, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lm3409myx-datasheet.pdf)
page.jsonadded+174
@@ -0,0 +1,174 @@+{+  "slug": "lm3409myx",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments LED Drivers, MSOP-10-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "led drivers",+    "lm3409myx",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "lm3409myx.kicad_sym",+    "lm3409myx.kicad_mod",+    "lm3409myx.glb",+    "lm3409myx.step",+    "lm3409myx.lbr",+    "docs/hero.png",+    "docs/lm3409myx-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "LM3409MYX",+    "manufacturer": "Texas Instruments",+    "package": "MSOP-10-EP",+    "pin_count": 11,+    "category": "LED Drivers",+    "subcategory": "LED Drivers",+    "datasheet": "https://www.ti.com/cn/lit/gpn/lm3409",+    "parts": {+      "symbol": "lm3409myx.kicad_sym",+      "footprint": "lm3409myx.kicad_mod",+      "model_3d": "lm3409myx-etched.glb",+      "model_3d_plain": "lm3409myx.glb",+      "model_3d_step": "lm3409myx-etched.step",+      "model_3d_step_plain": "lm3409myx.step",+      "lbr": "lm3409myx.lbr"+    },+    "distributor_links": {+      "lcsc": "C473394"+    },+    "distributor_check": {+      "checked_at": "2026-09-26T15:56:18Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": null,+        "status": "no match"+      },+      "mouser": {+        "pn": null,+        "status": "no match"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "UVLO",+        "type": "input",+        "description": "Undervoltage lockout input requiring resistor divider from VIN and GND with turn-on threshold of 1.24 V and hysteresis provided by 22 µA current source."+      },+      {+        "number": "2",+        "name": "IADJ",+        "type": "input",+        "description": "Analog LED current adjust input accepting voltage 0-1.24 V, external resistor to GND, or open connection for programmable current sense threshold."+      },+      {+        "number": "3",+        "name": "EN",+        "type": "input",+        "description": "Enable and PWM dimming input with rising threshold 1.74 V, falling threshold 0.5 V, and 420 mV hysteresis for low-power shutdown control."+      },+      {+        "number": "4",+        "name": "COFF",+        "type": "input",+        "description": "Off-time programming input with external RC network (resistor from output voltage VO and capacitor to GND) setting switching frequency."+      },+      {+        "number": "5",+        "name": "GND",+        "type": "power_in",+        "description": "System ground reference connection."+      },+      {+        "number": "6",+        "name": "PGATE",+        "type": "output",+        "description": "P-channel MOSFET gate drive output with 2-Ω typical source and sink resistance at 50 mA."+      },+      {+        "number": "7",+        "name": "CSN",+        "type": "input",+        "description": "Negative current sense input for high-side differential current measurement; connect to negative terminal of external sense resistor."+      },+      {+        "number": "8",+        "name": "CSP",+        "type": "input",+        "description": "Positive current sense input for high-side differential current measurement; connect to positive terminal of sense resistor and VIN."+      },+      {+        "number": "9",+        "name": "VCC",+        "type": "power_out",+        "description": "VIN-referenced linear regulator output providing 5.5-6.5 V (typical 6 V) for P-channel MOSFET gate drive; requires 1 µF minimum ceramic bypass capacitor to VIN."+      },+      {+        "number": "10",+        "name": "VIN",+        "type": "power_in",+        "description": "Input supply voltage ranging 6 V to 42 V for LM3409 standard variant."+      },+      {+        "number": "11",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: HVSSOP-10 package includes an exposed thermal pad (DAP) without a numbered pin designation; datashee",+          "exposed pad 11 added from the footprint"+        ],+        "pages_sent": 47,+        "cost_usd": 0.42,+        "at": "2026-09-26T15:56:02"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/lm3409",+        "pages": 47,+        "sha256": "7745578a43302ee7",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 11,+        "described": 11,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file