← Commit history

Initial commit: component/lm3409hvmy

Ray ·6eb09b57e0 ·
2 files changed +209
README.mdadded+47
@@ -0,0 +1,47 @@+# LM3409HVMY++**Texas Instruments** · LED Drivers · MSOP-10-EP++LM3409HVMY from Texas Instruments, in a MSOP-10-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | UVLO | input | Input undervoltage lockout with 1.24 V turn-on threshold and 22 µA hysteresis current source; connect to resistor divider from VIN to GND. |+| 2 | IADJ | input | Analog LED current adjust accepting 0 to 1.24 V input or external resistor to GND to set peak current threshold voltage. |+| 3 | EN | input | Logic level enable and PWM dimming input requiring >1.74 V to enable, accepting PWM signal to dim, or <0.5 V for shutdown. |+| 4 | COFF | input | Off-time programming input; connect external resistor from output voltage and capacitor to GND for switching frequency control. |+| 5 | GND | power_in | Ground connection; connect to system ground with 4 to 6 vias from thermal pad to GND plane. |+| 6 | PGATE | output | Gate drive output with 2 Ω output resistance sourcing and sinking 50 mA; connect to external P-channel MOSFET gate. |+| 7 | CSN | input | Negative terminal input for high-side differential current sense; connect to negative side of sense resistor. |+| 8 | CSP | input | Positive terminal input for high-side differential current sense; connect to positive side of sense resistor and to VIN. |+| 9 | VCC | power_out | VIN-referenced linear regulator output providing 5.5 to 6.5 V with 30 to 45 mA current limit; bypass with ≥1 µF ceramic capacitor to VIN. |+| 10 | VIN | power_in | Input voltage with 6 to 75 V operating range for LM3409HV and absolute maximum 76 V; 6 to 42 V for standard LM3409. |+| 11 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | MSOP-10-EP |+| Category | LED Drivers |+| Pins | 11 |++## CAD (KiCad official)++- Symbol: `LM3409HVMY`+- Footprint: `Package_SO:MSOP-10-1EP_3x3mm_P0.5mm_EP1.68x1.88mm`+- 3D model: MSOP-10-EP (KiCad packages3D, STEP)+- 3D model files: `lm3409hvmy-etched.step` / `lm3409hvmy-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm3409hvmy.step` / `lm3409hvmy.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lm3409hv) (47 pp, sha256 `7745578a43302ee7`, retrieved 2026-09-24, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lm3409hvmy-datasheet.pdf)
page.jsonadded+162
@@ -0,0 +1,162 @@+{+  "slug": "lm3409hvmy",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments LED Drivers, MSOP-10-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "led drivers",+    "lm3409hvmy",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "lm3409hvmy.kicad_sym",+    "lm3409hvmy.kicad_mod",+    "lm3409hvmy.glb",+    "lm3409hvmy.step",+    "lm3409hvmy.lbr",+    "docs/hero.png",+    "docs/lm3409hvmy-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "LM3409HVMY",+    "manufacturer": "Texas Instruments",+    "package": "MSOP-10-EP",+    "pin_count": 11,+    "category": "LED Drivers",+    "subcategory": "LED Drivers",+    "datasheet": "https://www.ti.com/cn/lit/gpn/lm3409hv",+    "parts": {+      "symbol": "lm3409hvmy.kicad_sym",+      "footprint": "lm3409hvmy.kicad_mod",+      "model_3d": "lm3409hvmy-etched.glb",+      "model_3d_plain": "lm3409hvmy.glb",+      "model_3d_step": "lm3409hvmy-etched.step",+      "model_3d_step_plain": "lm3409hvmy.step",+      "lbr": "lm3409hvmy.lbr"+    },+    "distributor_links": {+      "lcsc": "C11157"+    },+    "pins": [+      {+        "number": "1",+        "name": "UVLO",+        "type": "input",+        "description": "Input undervoltage lockout with 1.24 V turn-on threshold and 22 µA hysteresis current source; connect to resistor divider from VIN to GND."+      },+      {+        "number": "2",+        "name": "IADJ",+        "type": "input",+        "description": "Analog LED current adjust accepting 0 to 1.24 V input or external resistor to GND to set peak current threshold voltage."+      },+      {+        "number": "3",+        "name": "EN",+        "type": "input",+        "description": "Logic level enable and PWM dimming input requiring >1.74 V to enable, accepting PWM signal to dim, or <0.5 V for shutdown."+      },+      {+        "number": "4",+        "name": "COFF",+        "type": "input",+        "description": "Off-time programming input; connect external resistor from output voltage and capacitor to GND for switching frequency control."+      },+      {+        "number": "5",+        "name": "GND",+        "type": "power_in",+        "description": "Ground connection; connect to system ground with 4 to 6 vias from thermal pad to GND plane."+      },+      {+        "number": "6",+        "name": "PGATE",+        "type": "output",+        "description": "Gate drive output with 2 Ω output resistance sourcing and sinking 50 mA; connect to external P-channel MOSFET gate."+      },+      {+        "number": "7",+        "name": "CSN",+        "type": "input",+        "description": "Negative terminal input for high-side differential current sense; connect to negative side of sense resistor."+      },+      {+        "number": "8",+        "name": "CSP",+        "type": "input",+        "description": "Positive terminal input for high-side differential current sense; connect to positive side of sense resistor and to VIN."+      },+      {+        "number": "9",+        "name": "VCC",+        "type": "power_out",+        "description": "VIN-referenced linear regulator output providing 5.5 to 6.5 V with 30 to 45 mA current limit; bypass with ≥1 µF ceramic capacitor to VIN."+      },+      {+        "number": "10",+        "name": "VIN",+        "type": "power_in",+        "description": "Input voltage with 6 to 75 V operating range for LM3409HV and absolute maximum 76 V; 6 to 42 V for standard LM3409."+      },+      {+        "number": "11",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Thermal pad (DAP) is present in HVSSOP package but not formally numbered in pin configuration table;",+          "exposed pad 11 added from the footprint"+        ],+        "pages_sent": 47,+        "cost_usd": 0.4612,+        "at": "2026-09-24T03:39:31"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/lm3409hv",+        "pages": 47,+        "sha256": "7745578a43302ee7",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 11,+        "described": 11,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file