main
Ray lm3404hvmax: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 7bac3b3
{
  "schema_version": 1,
  "type": "component",
  "slug": "lm3404hvmax",
  "title": "LM3404HVMAX",
  "brief": "Texas Instruments LED Drivers, SOIC-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "led drivers",
    "lm3404hvmax"
  ],
  "component": {
    "mpn": "LM3404HVMAX",
    "manufacturer": "Texas Instruments",
    "package": "SOIC-8",
    "pin_count": 8,
    "category": "LED Drivers",
    "subcategory": "LED Drivers",
    "datasheet": "https://www.ti.com/cn/lit/gpn/lm3404hv",
    "parts": {
      "symbol": "lm3404hvmax.kicad_sym",
      "footprint": "lm3404hvmax.kicad_mod",
      "model_3d": "lm3404hvmax-etched.glb",
      "model_3d_plain": "lm3404hvmax.glb",
      "model_3d_step": "lm3404hvmax-etched.step",
      "model_3d_step_plain": "lm3404hvmax.step",
      "lbr": "lm3404hvmax.lbr"
    },
    "distributor_links": {},
    "pins": [
      {
        "number": "1",
        "name": "SW",
        "type": "output",
        "description": "Switch pin - drain of the internal high-side N-channel MOSFET. Connect to the output inductor and to the anode of the Schottky recirculating diode. Absolute maximum SW-to-GND is -1.5 V to 76 V on the HV part."
      },
      {
        "number": "2",
        "name": "BOOT",
        "type": "passive",
        "description": "MOSFET drive bootstrap pin. Connect a 10-nF ceramic capacitor from BOOT to SW to develop the gate-drive supply for the internal high-side switch. BST undervoltage lockout is ~3 V (BST-SW)."
      },
      {
        "number": "3",
        "name": "DIM",
        "type": "input",
        "description": "PWM dimming / enable input. Drive with a logic-level PWM signal (VIH ≥ 2.2 V, VIL ≤ 0.8 V) to gate the power MOSFET on/off and reduce average LED current. Includes an ~80 µA internal pull-up so the part runs at full duty if left open."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Device ground. Connect to system ground and to the ground return of the input, VCC bypass, and current-sense resistor."
      },
      {
        "number": "5",
        "name": "CS",
        "type": "input",
        "description": "Current-sense feedback pin. Set the LED current by connecting a sense resistor from CS to GND; the regulator turns the switch on when V(CS) falls below the 200 mV (typ) reference and turns off when V(CS) exceeds the 300 mV overvoltage threshold."
      },
      {
        "number": "6",
        "name": "RON",
        "type": "input",
        "description": "On-time control pin. A resistor from RON to VIN programs the regulator's controlled on-time (hysteretic constant-off-time control). Also acts as a shutdown input - pulling RON below ~0.7 V places the device in low-power shutdown."
      },
      {
        "number": "7",
        "name": "VCC",
        "type": "power_out",
        "description": "Output of the internal 7 V (typ, 6.4-7.4 V) linear regulator that supplies the gate driver and control circuits. Bypass to GND with a minimum 0.1 µF X5R/X7R ceramic capacitor. Do not load externally."
      },
      {
        "number": "8",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply pin. Nominal operating range is 6 V to 75 V on the LM3404HV (6 V to 42 V on the LM3404). Bypass locally with a low-ESR ceramic input capacitor."
      }
    ],
    "provenance": {
      "extractor": "ds2sf",
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/lm3404hv",
        "pages": 47,
        "sha256": "c30b6b258c57c07a",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lm3404hvmax.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lm3404hvmax-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "105d1a9945cc8100580e5f22cce4c532e2f77de62240f5d1bee9535ed6c73899",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "SOIC-8",
      "Category": "LED Drivers",
      "Pins": "8"
    }
  },
  "variants": [
    {
      "mpn": "LM3404HVMAX",
      "kind": "packaging"
    },
    {
      "mpn": "LM3404HVMAXMR",
      "kind": "packaging"
    },
    {
      "mpn": "LM3404HVMAXMRX",
      "kind": "packaging"
    }
  ],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "lm3404hvmax"
  ],
  "discovery_pitch": "LM3404HVMAX (Texas Instruments) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lm3404hvmax.kicad_sym",
    "lm3404hvmax.kicad_mod",
    "lm3404hvmax.glb",
    "lm3404hvmax.step",
    "lm3404hvmax.lbr",
    "docs/hero.png",
    "docs/lm3404hvmax-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  },
  "updated_at": "2026-09-28T16:40:43.525Z"
}