main
Ray
Initial commit: component/lm3402mm
a36b1b1
LM3402MM
Texas Instruments · LED Drivers · VSSOP-8-0.65mm
LM3402MM from Texas Instruments, in a VSSOP-8-0.65mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | output | Switch pin. Connect this pin to the output inductor and Schottky diode. |
| 2 | BOOT | output | MOSFET drive bootstrap pin. Connect a 10-nF ceramic capacitor from this pin to SW. |
| 3 | DIM | input | Input for PWM dimming. Connect a logic-level PWM signal to this pin to enable and disable the power MOSFET and reduce the average light output of the LED array. |
| 4 | GND | power_in | Ground pin. Connect this pin to system ground. |
| 5 | CS | input | Current sense feedback pin. Set the current through the LED array by connecting a resistor from this pin to ground. |
| 6 | RON | input | ON-time control pin. A resistor connected from this pin to VIN sets the regulator controlled ON-time. |
| 7 | VCC | power_out | Output of the internal 7-V linear regulator. Bypass this pin to ground with a minimum 0.1-µF ceramic capacitor with X5R or X7R dielectric. |
| 8 | VIN | power_in | Input voltage pin. Nominal operating input range for this pin is 6 V to 42 V (LM3402) or 6 V to 75 V (LM3402HV). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8-0.65mm |
| Category | LED Drivers |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
LM3402MM - Footprint:
Package_SO:VSSOP-8_2.3x2mm_P0.5mm - 3D model: VSSOP-8-0.65mm (KiCad packages3D, STEP)
- 3D model files:
lm3402mm-etched.step/lm3402mm-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm3402mm.step/lm3402mm.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (43 pp, sha256
8c6e2cc4aaa8c98a, retrieved 2026-10-01, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LM3402MM
**Texas Instruments** · LED Drivers · VSSOP-8-0.65mm
LM3402MM from Texas Instruments, in a VSSOP-8-0.65mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | output | Switch pin. Connect this pin to the output inductor and Schottky diode. |
| 2 | BOOT | output | MOSFET drive bootstrap pin. Connect a 10-nF ceramic capacitor from this pin to SW. |
| 3 | DIM | input | Input for PWM dimming. Connect a logic-level PWM signal to this pin to enable and disable the power MOSFET and reduce the average light output of the LED array. |
| 4 | GND | power_in | Ground pin. Connect this pin to system ground. |
| 5 | CS | input | Current sense feedback pin. Set the current through the LED array by connecting a resistor from this pin to ground. |
| 6 | RON | input | ON-time control pin. A resistor connected from this pin to VIN sets the regulator controlled ON-time. |
| 7 | VCC | power_out | Output of the internal 7-V linear regulator. Bypass this pin to ground with a minimum 0.1-µF ceramic capacitor with X5R or X7R dielectric. |
| 8 | VIN | power_in | Input voltage pin. Nominal operating input range for this pin is 6 V to 42 V (LM3402) or 6 V to 75 V (LM3402HV). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8-0.65mm |
| Category | LED Drivers |
| Pins | 8 |
## CAD (KiCad official)
- Symbol: `LM3402MM`
- Footprint: `Package_SO:VSSOP-8_2.3x2mm_P0.5mm`
- 3D model: VSSOP-8-0.65mm (KiCad packages3D, STEP)
- 3D model files: `lm3402mm-etched.step` / `lm3402mm-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm3402mm.step` / `lm3402mm.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lm3402) (43 pp, sha256 `8c6e2cc4aaa8c98a`, retrieved 2026-10-01, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lm3402mm-datasheet.pdf)