3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLM339AN
HGSEMI · Comparators · DIP-14
LM339AN from HGSEMI, in a DIP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT2 | output | Comparator 2 output; the datasheet gives output saturation voltage of 130 mV typical and 400 mV maximum at 4.0 mA sink current. |
| 2 | OUT1 | output | Comparator 1 output; the datasheet gives output saturation voltage of 130 mV typical and 400 mV maximum at 4.0 mA sink current. |
| 3 | Vcc | power_in | Positive supply pin; recommended supply is 3 to 32 V single-supply or ±1.5 to ±16 V dual-supply, with absolute maximum 36 V or ±18 V. |
| 4 | IN1(-) | input | Inverting input of comparator 1; the input common-mode range is (V-) - 0.1 V to (V+) - 2 V under recommended conditions. |
| 5 | IN1(+) | input | Non-inverting input of comparator 1; the input common-mode range is (V-) - 0.1 V to (V+) - 2 V under recommended conditions. |
| 6 | IN2(-) | input | Inverting input of comparator 2; the input common-mode range is (V-) - 0.1 V to (V+) - 2 V under recommended conditions. |
| 7 | IN2(+) | input | Non-inverting input of comparator 2; the input common-mode range is (V-) - 0.1 V to (V+) - 2 V under recommended conditions. |
| 8 | IN3(-) | input | Inverting input of comparator 3; the input common-mode range is (V-) - 0.1 V to (V+) - 2 V under recommended conditions. |
| 9 | IN3(+) | input | Non-inverting input of comparator 3; the input common-mode range is (V-) - 0.1 V to (V+) - 2 V under recommended conditions. |
| 10 | IN4(-) | input | Inverting input of comparator 4; the input common-mode range is (V-) - 0.1 V to (V+) - 2 V under recommended conditions. |
| 11 | IN4(+) | input | Non-inverting input of comparator 4; the input common-mode range is (V-) - 0.1 V to (V+) - 2 V under recommended conditions. |
| 12 | GND | power_in | Ground pin, listed in the datasheet pin function table as the ground reference (地). |
| 13 | OUT4 | output | Comparator 4 output; the datasheet gives output saturation voltage of 130 mV typical and 400 mV maximum at 4.0 mA sink current. |
| 14 | OUT3 | output | Comparator 3 output; the datasheet gives output saturation voltage of 130 mV typical and 400 mV maximum at 4.0 mA sink current. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | DIP-14 |
| Category | Amplifiers/Comparators |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VIO | 3 | 5 | mV | Ta=25℃ | 4 | |
| Input offset voltage | VIO | 9 | mV | -40℃≤Ta≤85℃ | 4 | ||
| Input offset current | IIO | 5 | 50 | nA | Ta=25℃ | 4 | |
| Input offset current | IIO | 150 | nA | -40℃≤Ta≤85℃ | 4 | ||
| Input bias current | IIB | 25 | 250 | nA | Ta=25℃ | 4 | |
| Input bias current | IIB | 400 | nA | -40℃≤Ta≤85℃ | 4 | ||
| Input common-mode voltage range | VICR | 0 | V | Ta=25℃ | 4 | ||
| Supply current | Icc | 0.8 | 2 | mA | RL=∞ | 4 | |
| Supply current | Icc | 1 | 2.5 | mA | RL=∞, Vcc=30V | 4 | |
| Voltage gain | Gv | 50 | 200 | V/mV | RL 15K, Vcc=15V | 4 | |
| Large signal response time | tRES | 300 | ns | VIN=TTL logic swing, VREF=1.4V, VRL=5.0V, RL=5.1KΩ | 4 | ||
| Response time | tRES | 1.3 | ns | VRL=5.0V, RL=5.1KΩ | 4 | ||
| Output saturation voltage | VSAT | 130 | 400 | mV | VIN(-) 1.0V, VIN(+)=0V, ISINK=4.0mA | 4 | |
| Output saturation voltage | VSAT | 700 | mV | VIN(-) 1.0V, VIN(+)=0V, ISINK=4.0mA, -40℃≤Ta≤85℃ | 4 | ||
| Output sink current | 6 | 16 | mA | VIN(-) 1.0V, VIN(+)=0V, Vo≤1.5V | 4 | ||
| Output leakage current | IOL | 0.1 | nA | VIN(+) 1.0V, VIN(-)=0V, Vo=5.0V | 4 | ||
| Output leakage current | IOL | 1000 | nA | VIN(+) 1.0V, VIN(-)=0V, Vo=30V, -40℃≤Ta≤85℃ | 4 | ||
| Supply voltage | Vcc | 36 | V | Single supply | 3 | ||
| Supply voltage | Vcc | 18 | V | Dual supply, ±18 V | 3 | ||
| Input differential voltage range | VIDR | 36 | V | 3 | |||
| Input common-mode voltage range | VICMR | -0.3 | V | 3 | |||
| Output current | ISC | 50 | mA | 3 | |||
| Power dissipation | PD | 1 | W | Tamb=25℃; derate 8mW/℃ above 25℃ | 3 | ||
| Storage temperature | Tstg | -65 | 150 | ℃ | 3 | ||
| Lead temperature (soldering) | TLEAD | 260 | ℃ | 10 s soldering | 3 | ||
| Supply voltage | Vcc | 3 | 32 | V | Single supply | 3 | |
| Supply voltage | Vcc | 1.5 | 16 | V | Dual supply, ±1.5 to ±16 V | 3 | |
| Operating ambient temperature | Tamb | 0 | 70 | ℃ | LM339A | 3 |
CAD (KiCad official)
- Symbol:
LM339AN - Footprint:
Package_DIP:DIP-14_W7.62mm - 3D model: DIP-14 (KiCad packages3D, STEP)
- 3D model files:
lm339an-etched.step/lm339an-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm339an.step/lm339an.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HGSEMI datasheet (11 pp, sha256
ee7092466dc7b844, retrieved 2026-11-12, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).