main
Ray
lm336mx-5-0: laser-etched CAD + chip hero (factory 2.0.0 backfill)
47ebb61
LM336MX-5.0
Texas Instruments · Voltage Reference · SOIC-8
LM336MX-5.0 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection. Leave floating or tie to any convenient node. |
| 2 | V- | passive | Anode (negative) terminal of the shunt reference. Typically connected to ground in a shunt-reference configuration; internally tied to pin 4. Reverse breakdown 4.9-5.1 V at IR = 1 mA. |
| 3 | NC | unconnected | No internal connection. Leave floating or tie to any convenient node. |
| 4 | V- | passive | Anode (negative) terminal of the shunt reference. Internally tied to pin 2; connect both to the same node (typically GND) for lowest inductance. |
| 5 | ADJ | input | Adjust terminal. Allows fine trimming of the 5.0V reference voltage (±1 V typical range per Figure 14) and of the temperature coefficient (per Figure 15) using an external potentiometer. May be left open if adjustment is not needed. |
| 6 | NC | unconnected | No internal connection. Leave floating or tie to any convenient node. |
| 7 | NC | unconnected | No internal connection. Leave floating or tie to any convenient node. |
| 8 | V+ | passive | Cathode (positive) terminal of the shunt reference. In a typical shunt configuration a bias resistor from the supply feeds this pin so that 600 µA to 10 mA flows through the device, developing the 5.00 V reference across V+ to V-. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | PMIC |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
LM336MX-5.0LM336MX-5.0MLM336MX-5.0ZLM336MX-5.0H
CAD (KiCad official)
- Symbol:
LM336MX-5.0 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
lm336mx-5-0-etched.step/lm336mx-5-0-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm336mx-5-0.step/lm336mx-5-0.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (15 pp, sha256
fcd7b76b51717c3a, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LM336MX-5.0
**Texas Instruments** · Voltage Reference · SOIC-8
LM336MX-5.0 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection. Leave floating or tie to any convenient node. |
| 2 | V- | passive | Anode (negative) terminal of the shunt reference. Typically connected to ground in a shunt-reference configuration; internally tied to pin 4. Reverse breakdown 4.9-5.1 V at IR = 1 mA. |
| 3 | NC | unconnected | No internal connection. Leave floating or tie to any convenient node. |
| 4 | V- | passive | Anode (negative) terminal of the shunt reference. Internally tied to pin 2; connect both to the same node (typically GND) for lowest inductance. |
| 5 | ADJ | input | Adjust terminal. Allows fine trimming of the 5.0V reference voltage (±1 V typical range per Figure 14) and of the temperature coefficient (per Figure 15) using an external potentiometer. May be left open if adjustment is not needed. |
| 6 | NC | unconnected | No internal connection. Leave floating or tie to any convenient node. |
| 7 | NC | unconnected | No internal connection. Leave floating or tie to any convenient node. |
| 8 | V+ | passive | Cathode (positive) terminal of the shunt reference. In a typical shunt configuration a bias resistor from the supply feeds this pin so that 600 µA to 10 mA flows through the device, developing the 5.00 V reference across V+ to V-. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | PMIC |
| Pins | 8 |
## Ordering variants
Same part, different packaging or reel option.
- `LM336MX-5.0`
- `LM336MX-5.0M`
- `LM336MX-5.0Z`
- `LM336MX-5.0H`
## CAD (KiCad official)
- Symbol: `LM336MX-5.0`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `lm336mx-5-0-etched.step` / `lm336mx-5-0-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm336mx-5-0.step` / `lm336mx-5-0.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/lm336mx-5.0.pdf) (15 pp, sha256 `fcd7b76b51717c3a`, retrieved 2026-08-17, tier: manufacturer)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lm336mx-5-0-datasheet.pdf)