main
Ray
lm331n: laser-etched CAD + chip hero (factory 2.0.0 backfill)
7dc803f
LM331N
HGSEMI · Analog To Digital Converters (ADC) · DIP-8
LM331N from HGSEMI, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IOUT | output | Current output. Switched precision current source output (nominally i = 1.90V/RS, ~135 uA with RS=14 kOhm) that delivers a fixed charge Q = i*t into the load capacitor CL each timing cycle. |
| 2 | IREF | output | Reference current / bandgap reference pin. Held at 1.90 VDC by the internal current pump; an external resistor RS from pin 2 to ground sets the reference current i = 1.90V/RS (typ. 10 uA to 500 uA operating range). |
| 3 | FOUT | output | Frequency output. Open-collector logic output (VSAT ~0.15 V at 5 mA); requires an external pull-up (e.g. 10 kOhm to VLOGIC). Capable of driving up to 3 TTL loads or a high-voltage output up to 40V; short-circuit-proof against VCC. |
| 4 | GND | power_in | Device ground. All voltages are referenced to GND = 0V. |
| 5 | R/C | passive | Timing RC network pin. External Rt (to VS) and Ct (to GND) set the one-shot period t = 1.1RtCt. Internal timer comparator trips at 2/3 VCC (threshold 0.63-0.70 x VS), then an internal reset transistor discharges Ct (VSAT ~0.22 V at 5 mA). |
| 6 | THRESHOLD | input | Input comparator inverting input (threshold). Compared to the input at pin 7 by the input comparator. Bias current ~-80 nA typ; common-mode range -0.2V to VCC-2V. |
| 7 | VIN | input | Comparator input (non-inverting input of the input comparator). Applied signal voltage V1; when V1 > Vx at pin 6 the one-shot timer is triggered. Bias current ~-80 nA typ; common-mode range -0.2V to VCC-2V. |
| 8 | VS | power_in | Positive supply voltage (VS / VCC). Operating range +4V to +40V; absolute max 40V. Typical supply current 1.5-4.0 mA at VS=5V (LM331). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | DIP-8 |
| Category | Data Acquisition |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
LM331NLM331ANLM331M/TRLM331AM/TR
CAD (KiCad official)
- Symbol:
LM331N - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: DIP-8 (KiCad packages3D, STEP)
- 3D model files:
lm331n-etched.step/lm331n-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm331n.step/lm331n.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HGSEMI datasheet (21 pp, sha256
cbb85fee4a95c1f7, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LM331N
**HGSEMI** · Analog To Digital Converters (ADC) · DIP-8
LM331N from HGSEMI, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IOUT | output | Current output. Switched precision current source output (nominally i = 1.90V/RS, ~135 uA with RS=14 kOhm) that delivers a fixed charge Q = i*t into the load capacitor CL each timing cycle. |
| 2 | IREF | output | Reference current / bandgap reference pin. Held at 1.90 VDC by the internal current pump; an external resistor RS from pin 2 to ground sets the reference current i = 1.90V/RS (typ. 10 uA to 500 uA operating range). |
| 3 | FOUT | output | Frequency output. Open-collector logic output (VSAT ~0.15 V at 5 mA); requires an external pull-up (e.g. 10 kOhm to VLOGIC). Capable of driving up to 3 TTL loads or a high-voltage output up to 40V; short-circuit-proof against VCC. |
| 4 | GND | power_in | Device ground. All voltages are referenced to GND = 0V. |
| 5 | R/C | passive | Timing RC network pin. External Rt (to VS) and Ct (to GND) set the one-shot period t = 1.1*Rt*Ct. Internal timer comparator trips at 2/3 VCC (threshold 0.63-0.70 x VS), then an internal reset transistor discharges Ct (VSAT ~0.22 V at 5 mA). |
| 6 | THRESHOLD | input | Input comparator inverting input (threshold). Compared to the input at pin 7 by the input comparator. Bias current ~-80 nA typ; common-mode range -0.2V to VCC-2V. |
| 7 | VIN | input | Comparator input (non-inverting input of the input comparator). Applied signal voltage V1; when V1 > Vx at pin 6 the one-shot timer is triggered. Bias current ~-80 nA typ; common-mode range -0.2V to VCC-2V. |
| 8 | VS | power_in | Positive supply voltage (VS / VCC). Operating range +4V to +40V; absolute max 40V. Typical supply current 1.5-4.0 mA at VS=5V (LM331). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | DIP-8 |
| Category | Data Acquisition |
| Pins | 8 |
## Ordering variants
Same part, different packaging or reel option.
- `LM331N`
- `LM331AN`
- `LM331M/TR`
- `LM331AM/TR`
## CAD (KiCad official)
- Symbol: `LM331N`
- Footprint: `Package_DIP:DIP-8_W7.62mm`
- 3D model: DIP-8 (KiCad packages3D, STEP)
- 3D model files: `lm331n-etched.step` / `lm331n-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm331n.step` / `lm331n.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HGSEMI datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8756991794767257600) (21 pp, sha256 `cbb85fee4a95c1f7`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lm331n-datasheet.pdf)