Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LM324G-P14-R

UTC(Unisonic Tech) · Operational Amplifier · TSSOP-14

LM324G-P14-R from UTC(Unisonic Tech), in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT 1 output Output of op-amp 1, which swings from 0 V to Vcc-1.5 V according to the datasheet features.
2 IN 1(-) input Inverting input of op-amp 1; the input common-mode voltage range includes ground and extends to Vcc-1.5 V (0 V to VCC-1.5 V at VCC=30 V).
3 IN 1(+) input Non-inverting input of op-amp 1; the input common-mode voltage range includes ground and extends to Vcc-1.5 V.
4 VCC power_in Positive supply pin; the wide operating supply range is VCC = 3 V to 40 V.
5 IN 2(+) input Non-inverting input of op-amp 2; the input common-mode voltage range includes ground and extends to Vcc-1.5 V.
6 IN 2(-) input Inverting input of op-amp 2; the input common-mode voltage range includes ground and extends to Vcc-1.5 V.
7 OUT 2 output Output of op-amp 2, which swings from 0 V to Vcc-1.5 V according to the datasheet features.
8 OUT 3 output Output of op-amp 3, which swings from 0 V to Vcc-1.5 V according to the datasheet features.
9 IN 3(-) input Inverting input of op-amp 3; the input common-mode voltage range includes ground and extends to Vcc-1.5 V.
10 IN 3(+) input Non-inverting input of op-amp 3; the input common-mode voltage range includes ground and extends to Vcc-1.5 V.
11 GND power_in Ground (reference) pin; all voltages are referenced to GND.
12 IN 4(+) input Non-inverting input of op-amp 4; the input common-mode voltage range includes ground and extends to Vcc-1.5 V.
13 IN 4(-) input Inverting input of op-amp 4; the input common-mode voltage range includes ground and extends to Vcc-1.5 V.
14 OUT 4 output Output of op-amp 4, which swings from 0 V to Vcc-1.5 V according to the datasheet features.

Key specifications

Parameter Value
Manufacturer UTC(Unisonic Tech)
Package TSSOP-14
Category Amplifiers
Pins 14

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VCC -20 20 V 3
Differential Input Voltage VI(DIFF) -40 40 V 3
Input Voltage VIN -0.3 40 V 3
Power Dissipation (TSSOP-14) PD 460 mW TSSOP-14 3
Operating Temperature TOPR -20 85 C 3
Storage Temperature TSTG -40 150 C 3
Operating Supply Voltage Range VCC 3 40 V Wide operating supply range (Features list) 1
Input Offset Voltage VI(OFF) 5 mV VCM=0V to VCC-1.5V; VO(P)=1.4V, RS=0 3
Input Offset Current II(OFF) 50 nA 3
Input Bias Current II(BIAS) 250 nA 3
Input Common Mode Voltage VI(CM) 0 V VCC=30V; upper limit printed as VCC-1.5 V 3
Power Supply Current ICC 1 3 mA RL=∞, VCC=30V 3
Power Supply Current ICC 0.7 1.2 mA VCC=5V 3
Large Signal Voltage Gain GV 25 100 V/mV VCC=15V, RL≧2K, VO(P)=1V ~ 11V 3
Output Voltage Swing High VO(H) 26 V VCC=30V, RL=2K 3
Output Voltage Swing High VO(H) 27 28 V VCC=30V, RL=10K 3
Output Voltage Swing Low VO(L) 5 20 mV VCC=5V, RL>10K 3
Common Mode Rejection Ratio CMRR 65 75 dB 3
Power Supply Rejection Ratio PSRR 65 100 dB 3
Short Circuit Current to Ground ISC 40 60 mA 3
Output Source Current ISOURCE 20 40 mA VI(+)=1V, VI(-)=0V; VCC=15V, VO(P)=2V 3
Output Sink Current ISINK 10 13 mA VI(+)=0V, VI(-)=1V; VCC=15V, VO(P)=2V 3
Output Sink Current (small signal) ISINK 12 45 μA VI(+)=0V, VI(-)=1V; VCC=15V, VO(P)=200mV 3

CAD (KiCad official)

  • Symbol: LM324G-P14-R
  • Footprint: Package_SO:TSSOP-14_4.4x5mm_P0.65mm
  • 3D model: TSSOP-14 (KiCad packages3D, STEP)
  • 3D model files: lm324g-p14-r-etched.step / lm324g-p14-r-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm324g-p14-r.step / lm324g-p14-r.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: UTC(Unisonic Tech) datasheet (5 pp, sha256 61889dbf7e9f3121, retrieved 2026-11-04, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF