3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownLM324DT
STMicroelectronics · Operational Amplifier · SOIC-14
LM324DT from STMicroelectronics, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT1 | output | Output of op-amp channel 1. Class-AB output stage; short-circuit current approximately 40 mA independent of VCC magnitude. |
| 2 | IN1- | input | Inverting input of op-amp channel 1. Input common-mode voltage range includes ground (0 to VCC-1.5 V @ Tamb=25°C); typical input bias current 20 nA. |
| 3 | IN1+ | input | Non-inverting input of op-amp channel 1. Input common-mode range includes ground; input voltage must not exceed VCC+ or fall below VCC- by more than 0.3 V. |
| 4 | VCC+ | power_in | Positive supply pin, common to all four amplifiers. Single supply 3 V to 30 V or split supply +1.5 V to +15 V; absolute maximum 32 V (or ±16 V split). |
| 5 | IN2+ | input | Non-inverting input of op-amp channel 2. Same common-mode range and bias characteristics as channel 1. |
| 6 | IN2- | input | Inverting input of op-amp channel 2. Typical input bias current 20 nA, input offset current 2 nA. |
| 7 | OUT2 | output | Output of op-amp channel 2. Internally frequency-compensated; 1.3 MHz typical gain bandwidth product. |
| 8 | OUT3 | output | Output of op-amp channel 3. Class-AB output; typical short-circuit current 40 mA. |
| 9 | IN3- | input | Inverting input of op-amp channel 3. |
| 10 | IN3+ | input | Non-inverting input of op-amp channel 3. |
| 11 | VCC- | power_in | Negative supply / ground pin, common to all four amplifiers. Tied to GND for single-supply operation or to the negative rail for split-supply operation (-1.5 V to -15 V; absolute max -16 V). |
| 12 | IN4+ | input | Non-inverting input of op-amp channel 4. |
| 13 | IN4- | input | Inverting input of op-amp channel 4. |
| 14 | OUT4 | output | Output of op-amp channel 4. Class-AB output stage with internal frequency compensation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOIC-14 |
| Category | Amplifiers/Comparators |
| Pins | 14 |
Ordering variants
Same part, different packaging or reel option.
LM324DTLM124DTLM324DTLM224DTLM324DTLM224ADTLM324DTLM224WDTLM324DTLM324ADTLM324WDTLM324AWDTLM324DTLM224APTLM324DTLM224PTLM324APTLM324AWPTLM324WPTLM324PTLM324DTLM224QTLM324QT
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage (LM324) | Vio | 2 | 7 | mV | Tamb = 25 °C | 6 | |
| Input offset voltage (LM324) | Vio | 9 | mV | Tmin ≤ Tamb ≤ Tmax | 6 | ||
| Input offset current | Iio | 2 | 20 | nA | Tamb = 25 °C | 6 | |
| Input offset current | Iio | 40 | nA | Tmin ≤ Tamb ≤ Tmax | 6 | ||
| Input bias current | Iib | 20 | 100 | nA | Tamb = 25 °C | 6 | |
| Input bias current | Iib | 200 | nA | Tmin ≤ Tamb ≤ Tmax | 6 | ||
| Large signal voltage gain | Avd | 50 | 100 | V/mV | VCC+ = 15 V, RL = 2 kΩ, Vo = 1.4 V to 11.4 V, Tamb = 25 °C | 6 | |
| Large signal voltage gain | Avd | 25 | V/mV | VCC+ = 15 V, RL = 2 kΩ, Vo = 1.4 V to 11.4 V, Tmin ≤ Tamb ≤ Tmax | 6 | ||
| Supply voltage rejection ratio | SVR | 65 | 110 | dB | Rs ≤ 10 kΩ, VCC+ = 5 V to 30 V, Tamb = 25 °C | 6 | |
| Supply voltage rejection ratio | SVR | 65 | dB | Rs ≤ 10 kΩ, VCC+ = 5 V to 30 V, Tmin ≤ Tamb ≤ Tmax | 6 | ||
| Supply current, all amps, no load | ICC | 0.7 | 1.2 | mA | Tamb = 25 °C, VCC = 5 V | 6 | |
| Supply current, all amps, no load | ICC | 1.5 | 3 | mA | Tamb = 25 °C, VCC = 30 V | 6 | |
| Supply current, all amps, no load | ICC | 0.8 | 1.2 | mA | Tmin ≤ Tamb ≤ Tmax, VCC = 5 V | 6 | |
| Input common mode voltage range | Vicm | 0 | 28.5 | V | VCC = 30 V, Tamb = 25 °C | 6 | |
| Input common mode voltage range | Vicm | 0 | 28 | V | VCC = 30 V, Tmin ≤ Tamb ≤ Tmax | 6 | |
| Common mode rejection ratio | CMR | 70 | 80 | dB | Rs ≤ 10 kΩ, Tamb = 25 °C | 6 | |
| Common mode rejection ratio | CMR | 60 | dB | Rs ≤ 10 kΩ, Tmin ≤ Tamb ≤ Tmax | 6 | ||
| Output current source | Isource | 20 | 40 | 70 | mA | Vid = 1 V, VCC = 15 V, Vo = 2 V | 6 |
| Output current sink | Isink | 10 | 20 | mA | Vid = -1 V, VCC = 15 V, Vo = 2 V | 6 | |
| Output current sink | Isink | 12 | 50 | µA | Vid = -1 V, VCC = 15 V, Vo = 0.2 V | 6 | |
| High level output voltage | VOH | 26 | 27 | V | VCC = 30 V, RL = 2 kΩ, Tamb = 25 °C | 7 | |
| High level output voltage | VOH | 26 | V | VCC = 30 V, RL = 2 kΩ, Tmin ≤ Tamb ≤ Tmax | 7 | ||
| High level output voltage | VOH | 27 | 28 | V | VCC = 30 V, RL = 10 kΩ, Tamb = 25 °C | 7 | |
| High level output voltage | VOH | 27 | V | VCC = 30 V, RL = 10 kΩ, Tmin ≤ Tamb ≤ Tmax | 7 | ||
| High level output voltage | VOH | 3 | V | VCC = 5 V, RL = 2 kΩ, Tmin ≤ Tamb ≤ Tmax | 7 | ||
| Low level output voltage | VOL | 5 | 20 | mV | RL = 10 kΩ, Tamb = 25 °C | 7 | |
| Low level output voltage | VOL | 20 | mV | RL = 10 kΩ, Tmin ≤ Tamb ≤ Tmax | 7 | ||
| Input offset voltage drift | DVio | 7 | 30 | µV/°C | 7 | ||
| Input offset current drift | DIio | 10 | 200 | pA/°C | 7 | ||
| Supply voltage (single supply) | VCC | 3 | 30 | V | Single supply | 5 | |
| Supply voltage (dual supplies) | VCC | 1.5 | 15 | V | Dual supplies, ±1.5 V to ±15 V | 5 | |
| Common-mode input voltage range | VICM | 0 | V | Tamb = 25 °C; maximum is VCC - 1.5 V as printed | 5 | ||
| Operating temperature range (LM324) | TOper | 0 | 70 | °C | LM324 | 5 | |
| Supply voltage | VCC | 32 | V | Printed as ±16 or 32 V | 4 | ||
| Input voltage (LM324) | Vi | -0.3 | 32 | V | LM124, LM224, LM324 (not A/W suffix variants) | 4 | |
| Differential input voltage | Vid | 32 | V | 4 | |||
| Power dissipation | Ptot | 400 | mW | D suffix | 4 | ||
| Input current | Iin | 50 | mA | 4 | |||
| Storage temperature range | Tstg | -65 | 150 | °C | 4 | ||
| Maximum junction temperature | Tj | 150 | °C | 4 | |||
| ESD HBM (LM324) | HBM | 250 | V | Human body model, LM124, LM224, LM324 | 4 | ||
| ESD MM | MM | 100 | V | Machine model | 4 | ||
| ESD CDM | CDM | 1500 | V | Charged device model | 4 | ||
| Thermal resistance junction to ambient (SO14) | Rthja | 103 | °C/W | SO14 package | 4 | ||
| Thermal resistance junction to case (SO14) | Rthjc | 31 | °C/W | SO14 package | 4 |
CAD (KiCad official)
- Symbol:
LM324DT - Footprint:
Package_SO:SOIC-14_3.9x8.7mm_P1.27mm - 3D model: SOIC-14 (KiCad packages3D, STEP)
- 3D model files:
lm324dt-etched.step/lm324dt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm324dt.step/lm324dt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (22 pp, sha256
c1aa97669d6ca9c8, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).