main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs lm321sn3t1g: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers lm321sn3t1g: viewers · Ray
lm321sn3t1g-etched.fit.json lm321sn3t1g: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lm321sn3t1g-etched.glb lm321sn3t1g: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lm321sn3t1g-etched.step lm321sn3t1g: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lm321sn3t1g.glb Publish 0.1.0 · Ray
lm321sn3t1g.kicad_mod Publish 0.1.0 · Ray
lm321sn3t1g.kicad_sym Publish 0.1.0 · Ray
lm321sn3t1g.lbr Publish 0.1.0 · Ray
lm321sn3t1g.step Publish 0.1.0 · Ray
package.json Publish 0.2.0 · Ray
page.json lm321sn3t1g: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md lm321sn3t1g: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

LM321SN3T1G

TECH PUBLIC · Operational Amplifier · SOT-23-5

LM321SN3T1G from TECH PUBLIC, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 +IN input Non-inverting input of the operational amplifier. Common-mode input voltage range is 0V to Vcc-1.5V; input bias current typically -20 nA.
2 -Vs power_in Negative supply / ground pin. Tie to GND for single-supply operation, or to the negative rail for split supply. Total supply range (Vcc - Vss) is 3V to 36V.
3 -IN input Inverting input of the operational amplifier. Input bias current typically -20 nA; input differential voltage range ±20V.
4 OUT output Op-amp output. Output voltage swing is 0V to Vcc-1.5V; short-circuit protected with typical Isc = 40 mA at Vcc=15V.
5 +Vs power_in Positive supply pin. Single-supply range 3V to 36V (absolute max 40V); split-supply range ±20V max. Typical supply current 0.7 mA.

Key specifications

Parameter Value
Manufacturer TECH PUBLIC
Package SOT-23-5
Category Op-amp/Cmp
Pins 5

Ordering variants

Same part, different packaging or reel option.

  • LM321SN3T1G

CAD (KiCad official)

  • Symbol: LM321SN3T1G
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: lm321sn3t1g-etched.step / lm321sn3t1g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm321sn3t1g.step / lm321sn3t1g.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
lm321sn3t1g.step 85 KB You want the bare part, or you mark your own boards.
lm321sn3t1g-etched.step 2.0 MB You want the part with LM321SN3T1G already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 485 faces against 102 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: TECH PUBLIC datasheet (6 pp, sha256 a15e033dd5e9d65d, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF