Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LM321G-AF5-R

UTC Unisonic Tech · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-25

LM321G-AF5-R from UTC Unisonic Tech, in a SOT-25. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 +IN input Non-inverting input; the common-mode input range is 0 V to V+ -1.5 V (CMRR ≥ 50 dB) and it may be driven up to +32 V without damage.
2 V- power_in Negative supply rail, stated in the datasheet as ground; the input common-mode range includes this ground, allowing single-supply operation.
3 -IN input Inverting input; the common-mode input range is 0 V to V+ -1.5 V (CMRR ≥ 50 dB) and it may be driven up to +32 V without damage.
4 OUTPUT output Output; short-circuit to ground is limited to approximately 40 mA independent of V+, and continuous shorts above V+ = 15 V can exceed power dissipation ratings.
5 V+ power_in Positive power supply; the supply voltage range is +3 V to +32 V (absolute maximum supply voltage 32 V).

Key specifications

Parameter Value
Manufacturer UTC Unisonic Tech
Package SOT-25
Category Power Management (PMIC)
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Offset Voltage VOS 2 7 mV (Note 3) 4
Input Bias Current IB 45 250 nA (Note 4) 4
Input Offset Current IOS 5 50 nA 4
Input Common-Mode Voltage Range VCM 0 V V+=30V (Note 5); For CMRR>=50dB 4
Large Signal Voltage Gain AV 25 100 V/mV V+=15V, RL=2kΩ, VO=1.4V~11.4V 4
Large Signal Voltage Gain AV 15 V/mV V+=15V, RL=2kΩ, VO=1.4V~11.4V 4
Power Supply Rejection Ratio PSRR 65 100 dB RS≤10kΩ, V+≤5V~30V 4
Common Mode Rejection Ratio CMRR 65 85 dB RS≤10kΩ 4
Output Swing High VOH 26 V V+=30V, RL=2kΩ 4
Output Swing High VOH 27 28 V V+=30V, RL=10kΩ 4
Output Swing Low VOL 5 20 mV V+=5V, RL=10kΩ 4
Supply Current, No Load IS 0.43 1.15 mA V+=5V 4
Supply Current, No Load IS 0.66 2.85 mA V+=30V 4
Output Current Sourcing ISOURCE 20 40 mA VID=+1V, V+=15V, VO=2V 4
Output Current Sinking ISINK 10 20 mA VID=-1V, V+=15V, VO=2V 4
Output Current Sinking ISINK 12 100 µA VID=-1V, V+=15V, VO=0.2V 4
Output Short Circuit to Ground IO 40 85 mA V+=15V (Note 6) 4
Supply Voltage (V+ - V−) VCC 32 V 3
Input Voltage VIN -0.3 32 V 3
Input Current 50 mA VIN<−0.3V (Note 2) 3
Junction Temperature TJ 150 °C 3
Operating Temperature TOPR -40 125 C (Note 4) 3
Storage Temperature TSTG -65 150 °C 3
Supply Voltage Range 3 32 V Wide supply voltage range (Features) 1
Slew Rate SR 0.4 V/µs V+=15V, RL=2kΩ, VIN=0.5~3V, CL=100pF, Unity Gain 4
Gain Bandwidth Product GBW 1 MHz V+=30V, f=100kHz, VIN=10mV, RL=2kΩ, CL=100pF 4
Phase Margin φm 60 deg 4
Total Harmonic Distortion THD 0.015 % f=1kHz, AV=20dB, RL=2kΩ, VO=2VPP, CL=100pF, V+=30V 4
Equivalent Input Noise Voltage en 40 nV Hz f=1kHz, RS=100Ω, V+=30V 4
Junction to Ambient Thermal Resistance θJA 265 °С/W 3

CAD (KiCad official)

  • Symbol: LM321G-AF5-R
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-25 (KiCad packages3D, STEP)
  • 3D model files: lm321g-af5-r-etched.step / lm321g-af5-r-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm321g-af5-r.step / lm321g-af5-r.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: UTC Unisonic Tech datasheet (7 pp, sha256 8b63528a75749946, retrieved 2026-10-18, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF