← Commit history

lm311p: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)

Ray ·360773cb9c · ·parent d770b7f
2 files changed +91−11
package.json+49−9
@@ -53,23 +53,23 @@         "number": "1",         "name": "EMIT OUT",         "type": "tri_state",-        "description": "Open-emitter comparator output that sinks current when low and presents high impedance when high; maximum voltage 30V from VCC\u2212."+        "description": "Open-emitter comparator output that sinks current when low and presents high impedance when high; maximum voltage 30V from VCC−."       },       {         "number": "2",         "name": "IN+",         "type": "input",-        "description": "Noninverting comparator input with operating voltage range VCC\u2212 + 0.5V to VCC+ \u2212 1.5V."+        "description": "Noninverting comparator input with operating voltage range VCC− + 0.5V to VCC+ − 1.5V."       },       {         "number": "3",-        "name": "IN\u2212",+        "name": "IN−",         "type": "input",-        "description": "Inverting comparator input with operating voltage range VCC\u2212 + 0.5V to VCC+ \u2212 1.5V."+        "description": "Inverting comparator input with operating voltage range VCC− + 0.5V to VCC+ − 1.5V."       },       {         "number": "4",-        "name": "VCC\u2212",+        "name": "VCC−",         "type": "power_in",         "description": "Negative power supply connection; serves as ground reference for single-supply operation or negative rail for dual-supply operation."       },@@ -83,7 +83,7 @@         "number": "6",         "name": "BAL/STRB",         "type": "input",-        "description": "Strobe control input for output enable; must be current-driven at \u22123 to \u22125 mA to enable output (do not connect directly to ground)."+        "description": "Strobe control input for output enable; must be current-driven at −3 to −5 mA to enable output (do not connect directly to ground)."       },       {         "number": "7",@@ -95,7 +95,7 @@         "number": "8",         "name": "VCC+",         "type": "power_in",-        "description": "Positive power supply connection; recommended operating supply range 3.5V to 30V span (VCC+ \u2212 VCC\u2212)."+        "description": "Positive power supply connection; recommended operating supply range 3.5V to 30V span (VCC+ − VCC−)."       }     ],     "provenance": {@@ -130,6 +130,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "lm311p.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "body on z = 0, through-hole leads below",+        "extents_mm": [+          7.874,+          9.27,+          6.98+        ],+        "zmin_mm": -3.3,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "4a377a56a8d9e9c0b86c095ef9ecc1869ac19e7f5069a3247b294250bf4f235d",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "lm311p-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "body on z = 0, through-hole leads below",+        "extents_mm": [+          7.874,+          9.27,+          6.98+        ],+        "zmin_mm": -3.3,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "273d594ccef98d1c0758974a19a62ef5267cd017ab8945551d5f872a88107469",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}
page.json+42−2
@@ -115,7 +115,47 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "lm311p.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "body on z = 0, through-hole leads below",+        "extents_mm": [+          7.874,+          9.27,+          6.98+        ],+        "zmin_mm": -3.3,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "4a377a56a8d9e9c0b86c095ef9ecc1869ac19e7f5069a3247b294250bf4f235d",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "lm311p-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "body on z = 0, through-hole leads below",+        "extents_mm": [+          7.874,+          9.27,+          6.98+        ],+        "zmin_mm": -3.3,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "273d594ccef98d1c0758974a19a62ef5267cd017ab8945551d5f872a88107469",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   },   "metadata": {     "specs": {@@ -162,4 +202,4 @@   "visibility": {     "public": true   }-}\ No newline at end of file+}