← Commit history

Initial commit: component/lm3103mhx

Ray ·f07799dcfc ·
2 files changed +249
README.mdadded+54
@@ -0,0 +1,54 @@+# LM3103MHX++**Texas Instruments** · DC-DC Converters · HTSSOP-16-EP++LM3103MHX from Texas Instruments, in a HTSSOP-16-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VIN | power_in | Input supply voltage pin to device with nominal input range of 4.5 V to 42 V. |+| 2 | VIN | power_in | Input supply voltage pin to device with nominal input range of 4.5 V to 42 V. |+| 3 | SW | output | Switch node internally connected to source of main MOSFET and drain of synchronous MOSFET; connect to output inductor. |+| 4 | SW | output | Switch node internally connected to source of main MOSFET and drain of synchronous MOSFET; connect to output inductor. |+| 5 | BST | passive | Bootstrap capacitor connection; connect 33 nF capacitor from SW pin and charge through internal diode during main MOSFET off-time. |+| 6 | AGND | power_in | Analog ground reference for all internal circuitry. |+| 7 | SS | passive | Soft-start pin with 70 µA internal current source charging external capacitor larger than 22 nF. |+| 8 | NC | unconnected | No connection; leave unconnected. |+| 9 | GND | power_in | Ground connection; must be connected to AGND pin for normal operation. |+| 10 | GND | power_in | Ground connection; must be connected to AGND pin for normal operation. |+| 11 | FB | input | Feedback input to regulation and over-voltage comparators with 0.6 V regulation setting; connect feedback resistors. |+| 12 | EN | input | Enable input with internal pull-up; connect to voltage higher than 1.6 V to enable device. |+| 13 | RON | input | On-time control input with external resistor from VIN pin to set main MOSFET on-time. |+| 14 | VCC | power_out | Startup regulator output regulated to 6 V nominal; connect capacitor larger than 1 µF between VCC and AGND for stable operation. |+| 15 | PGND | power_in | Power ground connection for synchronous MOSFET source; tie to ground plane. |+| 16 | PGND | power_in | Power ground connection for synchronous MOSFET source; tie to ground plane. |+| 17 | EP | power_in | Exposed pad thermal connection for die attach; connect to ground plane for thermal dissipation. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | HTSSOP-16-EP |+| Category | Power Supply Chip |+| Pins | 17 |++## CAD (KiCad official)++- Symbol: `LM3103MHX`+- Footprint: `Package_SO:TSSOP-16-1EP_4.4x5mm_P0.65mm`+- 3D model: HTSSOP-16-EP (KiCad packages3D, STEP)+- 3D model files: `lm3103mhx-etched.step` / `lm3103mhx-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm3103mhx.step` / `lm3103mhx.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lm3103) (26 pp, sha256 `c083cbc1b779ad70`, retrieved 2026-09-23, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lm3103mhx-datasheet.pdf)
page.jsonadded+195
@@ -0,0 +1,195 @@+{+  "slug": "lm3103mhx",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments DC-DC Converters, HTSSOP-16-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power supply chip",+    "lm3103mhx",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "lm3103mhx.kicad_sym",+    "lm3103mhx.kicad_mod",+    "lm3103mhx.glb",+    "lm3103mhx.step",+    "lm3103mhx.lbr",+    "docs/hero.png",+    "docs/lm3103mhx-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "LM3103MHX",+    "manufacturer": "Texas Instruments",+    "package": "HTSSOP-16-EP",+    "pin_count": 17,+    "category": "Power Supply Chip",+    "subcategory": "DC-DC Converters",+    "datasheet": "https://www.ti.com/cn/lit/gpn/lm3103",+    "parts": {+      "symbol": "lm3103mhx.kicad_sym",+      "footprint": "lm3103mhx.kicad_mod",+      "model_3d": "lm3103mhx-etched.glb",+      "model_3d_plain": "lm3103mhx.glb",+      "model_3d_step": "lm3103mhx-etched.step",+      "model_3d_step_plain": "lm3103mhx.step",+      "lbr": "lm3103mhx.lbr"+    },+    "distributor_links": {+      "lcsc": "C2070650"+    },+    "pins": [+      {+        "number": "1",+        "name": "VIN",+        "type": "power_in",+        "description": "Input supply voltage pin to device with nominal input range of 4.5 V to 42 V."+      },+      {+        "number": "2",+        "name": "VIN",+        "type": "power_in",+        "description": "Input supply voltage pin to device with nominal input range of 4.5 V to 42 V."+      },+      {+        "number": "3",+        "name": "SW",+        "type": "output",+        "description": "Switch node internally connected to source of main MOSFET and drain of synchronous MOSFET; connect to output inductor."+      },+      {+        "number": "4",+        "name": "SW",+        "type": "output",+        "description": "Switch node internally connected to source of main MOSFET and drain of synchronous MOSFET; connect to output inductor."+      },+      {+        "number": "5",+        "name": "BST",+        "type": "passive",+        "description": "Bootstrap capacitor connection; connect 33 nF capacitor from SW pin and charge through internal diode during main MOSFET off-time."+      },+      {+        "number": "6",+        "name": "AGND",+        "type": "power_in",+        "description": "Analog ground reference for all internal circuitry."+      },+      {+        "number": "7",+        "name": "SS",+        "type": "passive",+        "description": "Soft-start pin with 70 µA internal current source charging external capacitor larger than 22 nF."+      },+      {+        "number": "8",+        "name": "NC",+        "type": "unconnected",+        "description": "No connection; leave unconnected."+      },+      {+        "number": "9",+        "name": "GND",+        "type": "power_in",+        "description": "Ground connection; must be connected to AGND pin for normal operation."+      },+      {+        "number": "10",+        "name": "GND",+        "type": "power_in",+        "description": "Ground connection; must be connected to AGND pin for normal operation."+      },+      {+        "number": "11",+        "name": "FB",+        "type": "input",+        "description": "Feedback input to regulation and over-voltage comparators with 0.6 V regulation setting; connect feedback resistors."+      },+      {+        "number": "12",+        "name": "EN",+        "type": "input",+        "description": "Enable input with internal pull-up; connect to voltage higher than 1.6 V to enable device."+      },+      {+        "number": "13",+        "name": "RON",+        "type": "input",+        "description": "On-time control input with external resistor from VIN pin to set main MOSFET on-time."+      },+      {+        "number": "14",+        "name": "VCC",+        "type": "power_out",+        "description": "Startup regulator output regulated to 6 V nominal; connect capacitor larger than 1 µF between VCC and AGND for stable operation."+      },+      {+        "number": "15",+        "name": "PGND",+        "type": "power_in",+        "description": "Power ground connection for synchronous MOSFET source; tie to ground plane."+      },+      {+        "number": "16",+        "name": "PGND",+        "type": "power_in",+        "description": "Power ground connection for synchronous MOSFET source; tie to ground plane."+      },+      {+        "number": "17",+        "name": "EP",+        "type": "power_in",+        "description": "Exposed pad thermal connection for die attach; connect to ground plane for thermal dissipation."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 26,+        "cost_usd": 0.2815,+        "at": "2026-09-23T07:34:29"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/lm3103",+        "pages": 26,+        "sha256": "c083cbc1b779ad70",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 17,+        "described": 17,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file