component
LM3100MHX
Public Made by Adomby adom
Texas Instruments DC-DC Converters, HTSSOP-20-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
Publish 0.1.0
15 files changed
+19452
README.mdadded+102@@ -0,0 +1,102 @@+# LM3100MHX++**Texas Instruments** · DC-DC Converters · HTSSOP-20-EP++LM3100MHX from Texas Instruments, in a HTSSOP-20-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | N/C | unconnected | No connection; this pin must be left unconnected. |+| 2 | SW | output | Switching node internally connected to the buck switch source; connect to the output inductor. |+| 3 | SW | output | Switching node internally connected to the buck switch source; connect to the output inductor. |+| 4 | VIN | power_in | Input supply pin to the device with a nominal input range of 4.5 V to 36 V. |+| 5 | VIN | power_in | Input supply pin to the device with a nominal input range of 4.5 V to 36 V. |+| 6 | BST | passive | Bootstrap capacitor connection; connect a 0.033 µF capacitor from SW to this pin, charged by an internal diode during the high-side switch off-time. |+| 7 | GND | power_in | Analog ground for all internal circuitry other than the synchronous switches. |+| 8 | SS | passive | Soft-start pin where an internal 8 µA current source charges an external capacitor to provide the soft-start function. |+| 9 | N/C | unconnected | No connection; this pin must be left unconnected. |+| 10 | N/C | unconnected | No connection; this pin must be left unconnected. |+| 11 | TST | input | Test mode enable pin that forces the device into test mode; must be connected to ground for normal operation. |+| 12 | N/C | unconnected | No connection; this pin must be left unconnected. |+| 13 | FB | input | Feedback input internally connected to the regulation and over-voltage comparators with a 0.8 V regulation setting; connect to the feedback divider. |+| 14 | EN | input | Enable pin; connect a voltage higher than 1.26 V to enable the regulator. |+| 15 | RON | input | On-time control pin where an external resistor from VIN sets the high-side switch on-time. |+| 16 | VCC | power_out | Start-up regulator output nominally regulated to 6 V; connect a capacitor of not less than 680 nF between VCC and GND. |+| 17 | PGND | power_in | Power ground at the synchronous rectifier MOSFET source; tie to the power ground plane. |+| 18 | PGND | power_in | Power ground at the synchronous rectifier MOSFET source; tie to the power ground plane. |+| 19 | N/C | unconnected | No connection; this pin must be left unconnected. |+| 20 | N/C | unconnected | No connection; this pin must be left unconnected. |+| 21 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | HTSSOP-20-EP |+| Category | Power Management ICs |+| Pins | 21 |++## Electrical characteristics++Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).++| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |+|---|---|---|---|---|---|---|---|+| VIN, RON to GND | | -0.3 | | 40 | V | | 4 |+| SW to GND | | -0.3 | | 40 | V | | 4 |+| SW to GND (Transient) | | -2 | | | V | < 100 ns | 4 |+| VIN to SW | | -0.3 | | 40 | V | | 4 |+| BST to SW | | -0.3 | | 7 | V | | 4 |+| All Other Inputs to GND | | -0.3 | | 7 | V | | 4 |+| Junction Temperature | TJ | -65 | | 150 | °C | | 4 |+| Storage temperature | Tstg | | | 150 | °C | | 4 |+| ESD HBM | V(ESD) | -2 | | 2 | kV | Human-body model (HBM) | 4 |+| Supply Voltage Range | VIN | 4.5 | | 36 | V | | 4 |+| Junction Temperature Range | TJ | -40 | | 125 | °C | | 4 |+| Junction-to-case thermal resistance | RθJC | | 6.5 | | °C/W | PWP (HTSSOP) 20 pins | 4 |+| VCC Output voltage | VCC | 5 | 6 | 7.2 | V | CCC = 680 nF, no load, TJ = -40°C to 125°C | 5 |+| VIN - VCC Dropout voltage | | | 50 | 140 | mV | ICC = 2 mA, TJ = -40°C to 125°C | 5 |+| VIN - VCC Dropout voltage | | | 350 | 570 | mV | ICC = 20 mA, TJ = -40°C to 125°C | 5 |+| VCC current limit | IVCCL | | 40 | 65 | mA | VCC = 0 V, TJ = -40°C to 125°C | 5 |+| VCC under-voltage lockout threshold | VCC-UVLO | 3.6 | 3.75 | 3.85 | V | VIN increasing, TJ = -40°C to 125°C | 5 |+| UVLO hysteresis | VCC-UVLO-HYS | | 130 | | mV | VIN decreasing | 5 |+| UVLO filter delay | tVCC-UVLO-D | | 3 | | µs | | 5 |+| Operating current | IIN | | 0.7 | 1 | mA | No switching, VFB = 1 V, TJ = -40°C to 125°C | 5 |+| Operating current, device shutdown | IIN-SD | | 17 | 30 | µA | VEN = 0 V, TJ = -40°C to 125°C | 5 |+| Main MOSFET Rds(on) | RDS-UP-ON | | 0.18 | 0.35 | Ω | TJ = -40°C to 125°C | 5 |+| Syn. MOSFET Rds(on) | RDS-DN-ON | | 0.11 | 0.2 | Ω | TJ = -40°C to 125°C | 5 |+| Gate drive voltage UVLO | VG-UVLO | | 3.3 | 4 | V | VBST - VSW increasing, TJ = -40°C to 125°C | 5 |+| SS pin source current | ISS | 6 | 8 | 9.8 | µA | VSS = 0.5 V, TJ = -40°C to 125°C | 5 |+| Syn. MOSFET current limit threshold | ICL | | 1.9 | | A | | 5 |+| ON timer pulse width | tON | | 1.38 | | µs | VIN = 10 V, RON = 100 kΩ | 5 |+| ON timer pulse width | tON | | 0.47 | | µs | VIN = 30 V, RON = 100 kΩ | 5 |+| ON timer minimum pulse width | tON-MIN | | 200 | | ns | | 5 |+| OFF timer pulse width | tOFF | | 260 | | ns | | 5 |+| EN Pin input threshold | VEN | 1.236 | 1.26 | 1.285 | V | VEN rising, TJ = -40°C to 125°C | 5 |+| Enable threshold hysteresis | VEN-HYS | | 90 | | mV | VEN falling | 5 |+| In-regulation feedback voltage | VFB | 0.784 | 0.8 | 0.816 | V | VSS ≥ 0.8 V, TJ = -40°C to 125°C | 5 |+| In-regulation feedback voltage | VFB | 0.788 | | 0.812 | V | VSS ≥ 0.8 V, TJ = -40°C to 125°C | 5 |+| Feedback over-voltage threshold | VFB-OV | 0.894 | 0.92 | 0.94 | V | TJ = -40°C to 125°C | 5 |+| Feedback input current | IFB | | 5 | 100 | nA | TJ = -40°C to 125°C | 5 |+| Thermal shutdown temperature | TSD | | 165 | | °C | TJ rising | 5 |+| Thermal shutdown temperature hysteresis | TSD-HYS | | 20 | | °C | TJ falling | 5 |++## CAD (KiCad official)++- Symbol: `LM3100MHX`+- Footprint: `Package_SO:TSSOP-20-1EP_4.4x6.5mm_P0.65mm_EP2.15x3.35mm`+- 3D model: HTSSOP-20-EP, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.2 mm nominal TSSOP height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)+- 3D model files: `lm3100mhx-etched.step` / `lm3100mhx-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm3100mhx.step` / `lm3100mhx.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/lm3100mhx.pdf) (24 pp, sha256 `0b3a1e5eb905b98b`, retrieved 2026-10-22, tier: manufacturer)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lm3100mhx-datasheet.pdf)
docs/hero.pngadded⋯ 1 unchanged line ⋯
docs/lm3100mhx-datasheet.pdfadded⋯ 1 unchanged line ⋯
lm3100mhx-etched.glbadded⋯ 1 unchanged line ⋯
lm3100mhx-hero.glbadded⋯ 1 unchanged line ⋯
lm3100mhx-hero.overlay.jsonadded+537@@ -0,0 +1,537 @@+{+ "spec": "adom-hero 1.4",+ "mpn": "LM3100MHX",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 21,+ "span_mm": 9.2,+ "dash_mm": 0.23,+ "gap_mm": 0.138,+ "pad_stroke_mm": 0.0552+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 3,+ "pin1": {+ "source": "footprint silkscreen",+ "pad": "1"+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 20,+ "sides": "top + mirrored underside (single-sided)",+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "centre_offset_mm": 0.0,+ "tolerance_mm": 0.58,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -3.205,+ 3.205,+ -3.075,+ 3.075+ ],+ "pads_bbox_mm": [+ -3.625,+ 3.625,+ -3.125,+ 3.125+ ],+ "seating_z_mm": 0.0+ },+ "sources": {+ "glb": "lm3100mhx-etched.glb",+ "glb_sha256": "9da8a2415eb4cb732d4b05fbb3329a1503d31cf33d723b4d997cfcec1b52e19b",+ "footprint": "lm3100mhx.kicad_mod",+ "footprint_sha256": "67d5d3fffa56b501ab023130eba99e0ca4408b552c9ea891778c8a79f13b6163",+ "pins": "page.json component.pins",+ "pins_sha256": "30684d2fde6c404f0e48f679dd249159021f563b4df068a007dcb28c42dfc918"+ },+ "generator": "adom-wiki 1.7.78 (component_hero)",+ "labels": [+ {+ "pad": "1",+ "text": "N/C",+ "x": -4.32,+ "y": -2.925,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "2",+ "text": "SW",+ "x": -3.725,+ "y": -2.275,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "3",+ "text": "SW",+ "x": -3.725,+ "y": -1.625,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "4",+ "text": "VIN",+ "x": -3.725,+ "y": -0.975,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "5",+ "text": "VIN",+ "x": -3.725,+ "y": -0.325,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "6",+ "text": "BST",+ "x": -3.725,+ "y": 0.325,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "7",+ "text": "GND",+ "x": -3.725,+ "y": 0.975,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "8",+ "text": "SS",+ "x": -3.725,+ "y": 1.625,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "9",+ "text": "N/C",+ "x": -3.725,+ "y": 2.275,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "10",+ "text": "N/C",+ "x": -3.725,+ "y": 2.925,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "11",+ "text": "TST",+ "x": 3.725,+ "y": 2.925,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "12",+ "text": "N/C",+ "x": 3.725,+ "y": 2.275,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "13",+ "text": "FB",+ "x": 3.725,+ "y": 1.625,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "14",+ "text": "EN",+ "x": 3.725,+ "y": 0.975,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "15",+ "text": "RON",+ "x": 3.725,+ "y": 0.325,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "16",+ "text": "VCC",+ "x": 3.725,+ "y": -0.325,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "17",+ "text": "PGND",+ "x": 3.725,+ "y": -0.975,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "18",+ "text": "PGND",+ "x": 3.725,+ "y": -1.625,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "19",+ "text": "N/C",+ "x": 3.725,+ "y": -2.275,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "20",+ "text": "N/C",+ "x": 3.725,+ "y": -2.925,+ "align": "left",+ "vertical": false,+ "h": 0.325+ }+ ],+ "pads": [+ {+ "number": "1",+ "shape": "roundrect",+ "center_mm": [+ -2.8875,+ -2.925+ ],+ "size_mm": [+ 1.475,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "roundrect",+ "center_mm": [+ -2.8875,+ -2.275+ ],+ "size_mm": [+ 1.475,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "roundrect",+ "center_mm": [+ -2.8875,+ -1.625+ ],+ "size_mm": [+ 1.475,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "4",+ "shape": "roundrect",+ "center_mm": [+ -2.8875,+ -0.975+ ],+ "size_mm": [+ 1.475,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "5",+ "shape": "roundrect",+ "center_mm": [+ -2.8875,+ -0.325+ ],+ "size_mm": [+ 1.475,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "6",+ "shape": "roundrect",+ "center_mm": [+ -2.8875,+ 0.325+ ],+ "size_mm": [+ 1.475,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "7",+ "shape": "roundrect",+ "center_mm": [+ -2.8875,+ 0.975+ ],+ "size_mm": [+ 1.475,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "8",+ "shape": "roundrect",+ "center_mm": [+ -2.8875,+ 1.625+ ],+ "size_mm": [+ 1.475,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "9",+ "shape": "roundrect",+ "center_mm": [+ -2.8875,+ 2.275+ ],+ "size_mm": [+ 1.475,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "10",+ "shape": "roundrect",+ "center_mm": [+ -2.8875,+ 2.925+ ],+ "size_mm": [+ 1.475,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "11",+ "shape": "roundrect",+ "center_mm": [+ 2.8875,+ 2.925+ ],+ "size_mm": [+ 1.475,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "12",+ "shape": "roundrect",+ "center_mm": [+ 2.8875,+ 2.275+ ],+ "size_mm": [+ 1.475,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "13",+ "shape": "roundrect",+ "center_mm": [+ 2.8875,+ 1.625+ ],+ "size_mm": [+ 1.475,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "14",+ "shape": "roundrect",+ "center_mm": [+ 2.8875,+ 0.975+ ],+ "size_mm": [+ 1.475,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "15",+ "shape": "roundrect",+ "center_mm": [+ 2.8875,+ 0.325+ ],+ "size_mm": [+ 1.475,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "16",+ "shape": "roundrect",+ "center_mm": [+ 2.8875,+ -0.325+ ],+ "size_mm": [+ 1.475,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "17",+ "shape": "roundrect",+ "center_mm": [+ 2.8875,+ -0.975+ ],+ "size_mm": [+ 1.475,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "18",+ "shape": "roundrect",+ "center_mm": [+ 2.8875,+ -1.625+ ],+ "size_mm": [+ 1.475,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "19",+ "shape": "roundrect",+ "center_mm": [+ 2.8875,+ -2.275+ ],+ "size_mm": [+ 1.475,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "20",+ "shape": "roundrect",+ "center_mm": [+ 2.8875,+ -2.925+ ],+ "size_mm": [+ 1.475,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "21",+ "shape": "rect",+ "center_mm": [+ 0.0,+ 0.0+ ],+ "size_mm": [+ 2.15,+ 3.35+ ],+ "rot": 0.0+ }+ ]+}
lm3100mhx.glbadded⋯ 1 unchanged line ⋯
lm3100mhx.kicad_modadded+367@@ -0,0 +1,367 @@+(footprint "TSSOP-20-1EP_4.4x6.5mm_P0.65mm_EP2.15x3.35mm"+ (version 20260206)+ (generator "kicad-footprint-generator")+ (layer "F.Cu")+ (descr "TSSOP, 20 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-100132.PDF)")+ (tags "TSSOP SO")+ (property "Reference" "REF**"+ (at 0 -4.2 0)+ (layer "F.SilkS")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (property "Value" "TSSOP-20-1EP_4.4x6.5mm_P0.65mm_EP2.15x3.35mm"+ (at 0 4.2 0)+ (layer "F.Fab")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (property "KiLib_Generator" "package/gullwing"+ (at 0 0 0)+ (layer "F.SilkS")+ (hide yes)+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (attr smd)+ (duplicate_pad_numbers_are_jumpers no)+ (fp_line+ (start -2.31 -3.385)+ (end 2.31 -3.385)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_line+ (start 2.31 3.385)+ (end -2.31 3.385)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_poly+ (pts+ (xy -3.89 -2.93)+ (xy -4.22 -2.69)+ (xy -4.22 -3.17)+ )+ (stroke+ (width 0.12)+ (type solid)+ )+ (fill yes)+ (layer "F.SilkS")+ )+ (fp_line+ (start -3.88 -3.38)+ (end -2.45 -3.38)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start -3.88 3.38)+ (end -3.88 -3.38)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start -2.45 -3.5)+ (end 2.45 -3.5)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start -2.45 -3.38)+ (end -2.45 -3.5)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start -2.45 3.38)+ (end -3.88 3.38)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start -2.45 3.5)+ (end -2.45 3.38)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 2.45 -3.5)+ (end 2.45 -3.38)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 2.45 -3.38)+ (end 3.88 -3.38)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 2.45 3.38)+ (end 2.45 3.5)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 2.45 3.5)+ (end -2.45 3.5)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 3.88 -3.38)+ (end 3.88 3.38)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 3.88 3.38)+ (end 2.45 3.38)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_poly+ (pts+ (xy -1.2 -3.25)+ (xy 2.2 -3.25)+ (xy 2.2 3.25)+ (xy -2.2 3.25)+ (xy -2.2 -2.25)+ )+ (stroke+ (width 0.1)+ (type solid)+ )+ (fill no)+ (layer "F.Fab")+ )+ (fp_text user "${REFERENCE}"+ (at 0 0 0)+ (layer "F.Fab")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (pad "" smd roundrect+ (at -0.54 -0.84)+ (size 0.87 1.35)+ (layers "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "" smd roundrect+ (at -0.54 0.84)+ (size 0.87 1.35)+ (layers "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "" smd roundrect+ (at 0.54 -0.84)+ (size 0.87 1.35)+ (layers "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "" smd roundrect+ (at 0.54 0.84)+ (size 0.87 1.35)+ (layers "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "1" smd roundrect+ (at -2.8875 -2.925)+ (size 1.475 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "2" smd roundrect+ (at -2.8875 -2.275)+ (size 1.475 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "3" smd roundrect+ (at -2.8875 -1.625)+ (size 1.475 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "4" smd roundrect+ (at -2.8875 -0.975)+ (size 1.475 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "5" smd roundrect+ (at -2.8875 -0.325)+ (size 1.475 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "6" smd roundrect+ (at -2.8875 0.325)+ (size 1.475 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "7" smd roundrect+ (at -2.8875 0.975)+ (size 1.475 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "8" smd roundrect+ (at -2.8875 1.625)+ (size 1.475 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "9" smd roundrect+ (at -2.8875 2.275)+ (size 1.475 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "10" smd roundrect+ (at -2.8875 2.925)+ (size 1.475 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "11" smd roundrect+ (at 2.8875 2.925)+ (size 1.475 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "12" smd roundrect+ (at 2.8875 2.275)+ (size 1.475 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "13" smd roundrect+ (at 2.8875 1.625)+ (size 1.475 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "14" smd roundrect+ (at 2.8875 0.975)+ (size 1.475 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "15" smd roundrect+ (at 2.8875 0.325)+ (size 1.475 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "16" smd roundrect+ (at 2.8875 -0.325)+ (size 1.475 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "17" smd roundrect+ (at 2.8875 -0.975)+ (size 1.475 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "18" smd roundrect+ (at 2.8875 -1.625)+ (size 1.475 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "19" smd roundrect+ (at 2.8875 -2.275)+ (size 1.475 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "20" smd roundrect+ (at 2.8875 -2.925)+ (size 1.475 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "21" smd rect+ (at 0 0)+ (size 2.15 3.35)+ (property pad_prop_heatsink)+ (layers "F.Cu" "F.Mask")+ (zone_connect 2)+ )+ (embedded_fonts no)+ (model "${KICAD10_3DMODEL_DIR}/Package_SO.3dshapes/TSSOP-20-1EP_4.4x6.5mm_P0.65mm_EP2.15x3.35mm.step"+ (offset+ (xyz 0 0 0)+ )+ (scale+ (xyz 1 1 1)+ )+ (rotate+ (xyz 0 0 0)+ )+ )+)
lm3100mhx.kicad_symadded+97@@ -0,0 +1,97 @@+(kicad_symbol_lib (version 20211014) (generator ds2sf_rect)+ (symbol "LM3100MHX" (in_bom yes) (on_board yes)+ (property "Reference" "U" (at 0 17.78 0) (effects (font (size 1.27 1.27))))+ (property "Value" "LM3100MHX" (at 0 -17.78 0) (effects (font (size 1.27 1.27))))+ (property "Footprint" "" (at 0 0 0) (effects (font (size 1.27 1.27)) hide))+ (symbol "LM3100MHX_0_1"+ (rectangle (start -12.70 15.24) (end 12.70 -15.24)+ (stroke (width 0.254) (type default)) (fill (type background)))+ )+ (symbol "LM3100MHX_1_1"+ (pin no_connect line (at -17.78 12.70 0) (length 5.08)+ (name "N/C" (effects (font (size 1.27 1.27))))+ (number "1" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at -17.78 10.16 0) (length 5.08)+ (name "SW" (effects (font (size 1.27 1.27))))+ (number "2" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at -17.78 7.62 0) (length 5.08)+ (name "SW" (effects (font (size 1.27 1.27))))+ (number "3" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at -17.78 5.08 0) (length 5.08)+ (name "VIN" (effects (font (size 1.27 1.27))))+ (number "4" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at -17.78 2.54 0) (length 5.08)+ (name "VIN" (effects (font (size 1.27 1.27))))+ (number "5" (effects (font (size 1.27 1.27))))+ )+ (pin passive line (at -17.78 0.00 0) (length 5.08)+ (name "BST" (effects (font (size 1.27 1.27))))+ (number "6" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at -17.78 -2.54 0) (length 5.08)+ (name "GND" (effects (font (size 1.27 1.27))))+ (number "7" (effects (font (size 1.27 1.27))))+ )+ (pin passive line (at -17.78 -5.08 0) (length 5.08)+ (name "SS" (effects (font (size 1.27 1.27))))+ (number "8" (effects (font (size 1.27 1.27))))+ )+ (pin no_connect line (at -17.78 -7.62 0) (length 5.08)+ (name "N/C" (effects (font (size 1.27 1.27))))+ (number "9" (effects (font (size 1.27 1.27))))+ )+ (pin no_connect line (at -17.78 -10.16 0) (length 5.08)+ (name "N/C" (effects (font (size 1.27 1.27))))+ (number "10" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at -17.78 -12.70 0) (length 5.08)+ (name "TST" (effects (font (size 1.27 1.27))))+ (number "11" (effects (font (size 1.27 1.27))))+ )+ (pin passive line (at 17.78 10.16 180) (length 5.08)+ (name "EP" (effects (font (size 1.27 1.27))))+ (number "21" (effects (font (size 1.27 1.27))))+ )+ (pin no_connect line (at 17.78 7.62 180) (length 5.08)+ (name "N/C" (effects (font (size 1.27 1.27))))+ (number "20" (effects (font (size 1.27 1.27))))+ )+ (pin no_connect line (at 17.78 5.08 180) (length 5.08)+ (name "N/C" (effects (font (size 1.27 1.27))))+ (number "19" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at 17.78 2.54 180) (length 5.08)+ (name "PGND" (effects (font (size 1.27 1.27))))+ (number "18" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at 17.78 0.00 180) (length 5.08)+ (name "PGND" (effects (font (size 1.27 1.27))))+ (number "17" (effects (font (size 1.27 1.27))))+ )+ (pin power_out line (at 17.78 -2.54 180) (length 5.08)+ (name "VCC" (effects (font (size 1.27 1.27))))+ (number "16" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 -5.08 180) (length 5.08)+ (name "RON" (effects (font (size 1.27 1.27))))+ (number "15" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 -7.62 180) (length 5.08)+ (name "EN" (effects (font (size 1.27 1.27))))+ (number "14" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 -10.16 180) (length 5.08)+ (name "FB" (effects (font (size 1.27 1.27))))+ (number "13" (effects (font (size 1.27 1.27))))+ )+ (pin no_connect line (at 17.78 -12.70 180) (length 5.08)+ (name "N/C" (effects (font (size 1.27 1.27))))+ (number "12" (effects (font (size 1.27 1.27))))+ )+ )+ )+)
lm3100mhx.lbradded+165@@ -0,0 +1,165 @@+<?xml version="1.0" encoding="utf-8"?>+<!DOCTYPE eagle SYSTEM "eagle.dtd">+<eagle version="9.6.2">+<drawing>+<settings><setting alwaysvectorfont="no"/></settings>+<grid distance="0.1" unitdist="inch" unit="inch" style="lines" multiple="1" display="no" altdistance="0.01" altunitdist="inch" altunit="inch"/>+<layers>+<layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>+<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>+<layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>+<layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>+<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>+<layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>+<layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="25" name="tNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="26" name="bNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="27" name="tValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="28" name="bValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>+<layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/>+<layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/>+<layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/>+<layer number="33" name="tFinish" color="6" fill="3" visible="no" active="yes"/>+<layer number="34" name="bFinish" color="6" fill="6" visible="no" active="yes"/>+<layer number="35" name="tGlue" color="7" fill="4" visible="no" active="yes"/>+<layer number="36" name="bGlue" color="7" fill="5" visible="no" active="yes"/>+<layer number="37" name="tTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="38" name="bTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="39" name="tKeepout" color="4" fill="11" visible="no" active="yes"/>+<layer number="40" name="bKeepout" color="1" fill="11" visible="no" active="yes"/>+<layer number="41" name="tRestrict" color="4" fill="10" visible="no" active="yes"/>+<layer number="42" name="bRestrict" color="1" fill="10" visible="no" active="yes"/>+<layer number="43" name="vRestrict" color="2" fill="10" visible="no" active="yes"/>+<layer number="44" name="Drills" color="7" fill="1" visible="no" active="yes"/>+<layer number="45" name="Holes" color="7" fill="1" visible="no" active="yes"/>+<layer number="46" name="Milling" color="3" fill="1" visible="no" active="yes"/>+<layer number="47" name="Measures" color="7" fill="1" visible="no" active="yes"/>+<layer number="48" name="Document" color="7" fill="1" visible="yes" active="yes"/>+<layer number="49" name="Reference" color="7" fill="1" visible="yes" active="yes"/>+<layer number="91" name="Nets" color="2" fill="1" visible="yes" active="yes"/>+<layer number="92" name="Busses" color="1" fill="1" visible="yes" active="yes"/>+<layer number="93" name="Pins" color="2" fill="1" visible="no" active="yes"/>+<layer number="94" name="Symbols" color="4" fill="1" visible="yes" active="yes"/>+<layer number="95" name="Names" color="7" fill="1" visible="yes" active="yes"/>+<layer number="96" name="Values" color="7" fill="1" visible="yes" active="yes"/>+<layer number="97" name="Info" color="7" fill="1" visible="yes" active="yes"/>+<layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/>+</layers>+<library>+<description></description>+<packages>+<package name="TSSOP-20-1EP_4.4x6.5mm_P0.65mm_EP2.15x3.35mm">+ <description>TSSOP-20-1EP, 4.4 x 6.5 mm, 0.65 mm pitch</description>+ <smd name="1" x="-2.8875" y="2.9250" dx="1.4750" dy="0.4000" layer="1" roundness="50"/>+ <smd name="2" x="-2.8875" y="2.2750" dx="1.4750" dy="0.4000" layer="1" roundness="50"/>+ <smd name="3" x="-2.8875" y="1.6250" dx="1.4750" dy="0.4000" layer="1" roundness="50"/>+ <smd name="4" x="-2.8875" y="0.9750" dx="1.4750" dy="0.4000" layer="1" roundness="50"/>+ <smd name="5" x="-2.8875" y="0.3250" dx="1.4750" dy="0.4000" layer="1" roundness="50"/>+ <smd name="6" x="-2.8875" y="-0.3250" dx="1.4750" dy="0.4000" layer="1" roundness="50"/>+ <smd name="7" x="-2.8875" y="-0.9750" dx="1.4750" dy="0.4000" layer="1" roundness="50"/>+ <smd name="8" x="-2.8875" y="-1.6250" dx="1.4750" dy="0.4000" layer="1" roundness="50"/>+ <smd name="9" x="-2.8875" y="-2.2750" dx="1.4750" dy="0.4000" layer="1" roundness="50"/>+ <smd name="10" x="-2.8875" y="-2.9250" dx="1.4750" dy="0.4000" layer="1" roundness="50"/>+ <smd name="11" x="2.8875" y="-2.9250" dx="1.4750" dy="0.4000" layer="1" roundness="50"/>+ <smd name="12" x="2.8875" y="-2.2750" dx="1.4750" dy="0.4000" layer="1" roundness="50"/>+ <smd name="13" x="2.8875" y="-1.6250" dx="1.4750" dy="0.4000" layer="1" roundness="50"/>+ <smd name="14" x="2.8875" y="-0.9750" dx="1.4750" dy="0.4000" layer="1" roundness="50"/>+ <smd name="15" x="2.8875" y="-0.3250" dx="1.4750" dy="0.4000" layer="1" roundness="50"/>+ <smd name="16" x="2.8875" y="0.3250" dx="1.4750" dy="0.4000" layer="1" roundness="50"/>+ <smd name="17" x="2.8875" y="0.9750" dx="1.4750" dy="0.4000" layer="1" roundness="50"/>+ <smd name="18" x="2.8875" y="1.6250" dx="1.4750" dy="0.4000" layer="1" roundness="50"/>+ <smd name="19" x="2.8875" y="2.2750" dx="1.4750" dy="0.4000" layer="1" roundness="50"/>+ <smd name="20" x="2.8875" y="2.9250" dx="1.4750" dy="0.4000" layer="1" roundness="50"/>+ <smd name="21" x="0.0000" y="-0.0000" dx="2.1500" dy="3.3500" layer="1" cream="no"/>+ <polygon width="0.1200" layer="21">+ <vertex x="-3.8900" y="2.9300"/>+ <vertex x="-4.2200" y="2.6900"/>+ <vertex x="-4.2200" y="3.1700"/>+ </polygon>+ <polygon width="0.1000" layer="51">+ <vertex x="-1.2000" y="3.2500"/>+ <vertex x="2.2000" y="3.2500"/>+ <vertex x="2.2000" y="-3.2500"/>+ <vertex x="-2.2000" y="-3.2500"/>+ <vertex x="-2.2000" y="2.2500"/>+ </polygon>+ <wire x1="-2.3100" y1="3.3850" x2="2.3100" y2="3.3850" width="0.1200" layer="21"/>+ <wire x1="2.3100" y1="-3.3850" x2="-2.3100" y2="-3.3850" width="0.1200" layer="21"/>+ <text x="0" y="4.262" size="1.27" layer="25" align="bottom-center">>NAME</text>+ <text x="0" y="-4.262" size="1.27" layer="27" align="top-center">>VALUE</text>+</package>+</packages>+<symbols>+<symbol name="LM3100MHX">+ <wire x1="-12.7" y1="15.24" x2="12.7" y2="15.24" width="0.254" layer="94"/>+ <wire x1="12.7" y1="15.24" x2="12.7" y2="-15.24" width="0.254" layer="94"/>+ <wire x1="12.7" y1="-15.24" x2="-12.7" y2="-15.24" width="0.254" layer="94"/>+ <wire x1="-12.7" y1="-15.24" x2="-12.7" y2="15.24" width="0.254" layer="94"/>+ <text x="0.0000" y="17.7800" size="1.27" layer="95" align="center">>NAME</text>+ <text x="0.0000" y="-17.7800" size="1.27" layer="96" align="center">>VALUE</text>+ <pin name="N/C" x="-17.78" y="12.7" length="middle" direction="nc"/>+ <pin name="SW" x="-17.78" y="10.16" length="middle" direction="out"/>+ <pin name="SW@2" x="-17.78" y="7.62" length="middle" direction="out"/>+ <pin name="VIN" x="-17.78" y="5.08" length="middle" direction="pwr"/>+ <pin name="VIN@2" x="-17.78" y="2.54" length="middle" direction="pwr"/>+ <pin name="BST" x="-17.78" y="0" length="middle" direction="pas"/>+ <pin name="GND" x="-17.78" y="-2.54" length="middle" direction="pwr"/>+ <pin name="SS" x="-17.78" y="-5.08" length="middle" direction="pas"/>+ <pin name="N/C@2" x="-17.78" y="-7.62" length="middle" direction="nc"/>+ <pin name="N/C@3" x="-17.78" y="-10.16" length="middle" direction="nc"/>+ <pin name="TST" x="-17.78" y="-12.7" length="middle" direction="in"/>+ <pin name="EP" x="17.78" y="10.16" length="middle" direction="pas" rot="R180"/>+ <pin name="N/C@4" x="17.78" y="7.62" length="middle" direction="nc" rot="R180"/>+ <pin name="N/C@5" x="17.78" y="5.08" length="middle" direction="nc" rot="R180"/>+ <pin name="PGND" x="17.78" y="2.54" length="middle" direction="pwr" rot="R180"/>+ <pin name="PGND@2" x="17.78" y="0" length="middle" direction="pwr" rot="R180"/>+ <pin name="VCC" x="17.78" y="-2.54" length="middle" direction="out" rot="R180"/>+ <pin name="RON" x="17.78" y="-5.08" length="middle" direction="in" rot="R180"/>+ <pin name="EN" x="17.78" y="-7.62" length="middle" direction="in" rot="R180"/>+ <pin name="FB" x="17.78" y="-10.16" length="middle" direction="in" rot="R180"/>+ <pin name="N/C@6" x="17.78" y="-12.7" length="middle" direction="nc" rot="R180"/>+</symbol>+</symbols>+<devicesets>+<deviceset name="LM3100MHX" prefix="U">+ <description></description>+ <gates>+ <gate name="G$1" symbol="LM3100MHX" x="0" y="0"/>+ </gates>+ <devices>+ <device name="" package="TSSOP-20-1EP_4.4x6.5mm_P0.65mm_EP2.15x3.35mm">+ <connects>+ <connect gate="G$1" pin="N/C" pad="1"/>+ <connect gate="G$1" pin="SW" pad="2"/>+ <connect gate="G$1" pin="SW@2" pad="3"/>+ <connect gate="G$1" pin="VIN" pad="4"/>+ <connect gate="G$1" pin="VIN@2" pad="5"/>+ <connect gate="G$1" pin="BST" pad="6"/>+ <connect gate="G$1" pin="GND" pad="7"/>+ <connect gate="G$1" pin="SS" pad="8"/>+ <connect gate="G$1" pin="N/C@2" pad="9"/>+ <connect gate="G$1" pin="N/C@3" pad="10"/>+ <connect gate="G$1" pin="TST" pad="11"/>+ <connect gate="G$1" pin="EP" pad="21"/>+ <connect gate="G$1" pin="N/C@4" pad="20"/>+ <connect gate="G$1" pin="N/C@5" pad="19"/>+ <connect gate="G$1" pin="PGND" pad="18"/>+ <connect gate="G$1" pin="PGND@2" pad="17"/>+ <connect gate="G$1" pin="VCC" pad="16"/>+ <connect gate="G$1" pin="RON" pad="15"/>+ <connect gate="G$1" pin="EN" pad="14"/>+ <connect gate="G$1" pin="FB" pad="13"/>+ <connect gate="G$1" pin="N/C@6" pad="12"/>+ </connects>+ <technologies><technology name=""/></technologies>+ </device>+ </devices>+</deviceset>+</devicesets>+</library>+</drawing>+</eagle>
lm3100mhx.stepadded+17636@@ -0,0 +1,17636 @@+ISO-10303-21;+HEADER;+FILE_DESCRIPTION(('Open CASCADE Model'),'2;1');+FILE_NAME('Open CASCADE Shape Model','2026-10-22T21:04:07',('Author'),(+ 'Open CASCADE'),'Open CASCADE STEP processor 7.9','Open CASCADE 7.9'+ ,'Unknown');+FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));+ENDSEC;+DATA;+#1 = APPLICATION_PROTOCOL_DEFINITION('international standard',+ 'automotive_design',2000,#2);+#2 = APPLICATION_CONTEXT(+ 'core data for automotive mechanical design processes');+#3 = SHAPE_DEFINITION_REPRESENTATION(#4,#10);+#4 = PRODUCT_DEFINITION_SHAPE('','',#5);+#5 = PRODUCT_DEFINITION('design','',#6,#9);+#6 = PRODUCT_DEFINITION_FORMATION('','',#7);+#7 = PRODUCT('LM3100MHX','LM3100MHX','',(#8));+#8 = PRODUCT_CONTEXT('',#2,'mechanical');+#9 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#10 = SHAPE_REPRESENTATION('',(#11,#15,#655,#1297,#1939,#2581,#3223,+ #3865,#4507,#5149,#5791,#6433,#7075,#7717,#8359,#9001,#9643,#10285,+ #10927,#11569,#12211,#12853,#13495,#13825),#13923);+#11 = AXIS2_PLACEMENT_3D('',#12,#13,#14);+#12 = CARTESIAN_POINT('',(0.,0.,0.));+#13 = DIRECTION('',(0.,0.,1.));+#14 = DIRECTION('',(1.,0.,-0.));+#15 = MANIFOLD_SOLID_BREP('',#16);+#16 = CLOSED_SHELL('',(#17,#137,#218,#299,#348,#397,#429,#478,#562,#589,+ #596,#651));+#17 = ADVANCED_FACE('',(#18),#32,.F.);+#18 = FACE_BOUND('',#19,.F.);+#19 = EDGE_LOOP('',(#20,#55,#83,#111));+#20 = ORIENTED_EDGE('',*,*,#21,.F.);+#21 = EDGE_CURVE('',#22,#24,#26,.T.);+#22 = VERTEX_POINT('',#23);+#23 = CARTESIAN_POINT('',(-2.2,-3.25,0.1));+#24 = VERTEX_POINT('',#25);+#25 = CARTESIAN_POINT('',(-2.2,-3.25,1.12));+#26 = SURFACE_CURVE('',#27,(#31,#43),.PCURVE_S1.);+#27 = LINE('',#28,#29);+#28 = CARTESIAN_POINT('',(-2.2,-3.25,0.1));+#29 = VECTOR('',#30,1.);+#30 = DIRECTION('',(0.,0.,1.));+#31 = PCURVE('',#32,#37);+#32 = PLANE('',#33);+#33 = AXIS2_PLACEMENT_3D('',#34,#35,#36);+#34 = CARTESIAN_POINT('',(-2.2,-3.25,0.1));+#35 = DIRECTION('',(1.,0.,0.));+#36 = DIRECTION('',(0.,0.,1.));+#37 = DEFINITIONAL_REPRESENTATION('',(#38),#42);+#38 = LINE('',#39,#40);+#39 = CARTESIAN_POINT('',(0.,0.));+#40 = VECTOR('',#41,1.);+#41 = DIRECTION('',(1.,0.));+#42 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#43 = PCURVE('',#44,#49);+#44 = PLANE('',#45);+#45 = AXIS2_PLACEMENT_3D('',#46,#47,#48);+#46 = CARTESIAN_POINT('',(-2.2,-3.25,0.1));+#47 = DIRECTION('',(0.,1.,0.));+#48 = DIRECTION('',(0.,0.,1.));+#49 = DEFINITIONAL_REPRESENTATION('',(#50),#54);+#50 = LINE('',#51,#52);+#51 = CARTESIAN_POINT('',(0.,0.));+#52 = VECTOR('',#53,1.);+#53 = DIRECTION('',(1.,0.));+#54 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#55 = ORIENTED_EDGE('',*,*,#56,.T.);+#56 = EDGE_CURVE('',#22,#57,#59,.T.);+#57 = VERTEX_POINT('',#58);+#58 = CARTESIAN_POINT('',(-2.2,3.25,0.1));+#59 = SURFACE_CURVE('',#60,(#64,#71),.PCURVE_S1.);+#60 = LINE('',#61,#62);+#61 = CARTESIAN_POINT('',(-2.2,-3.25,0.1));+#62 = VECTOR('',#63,1.);+#63 = DIRECTION('',(0.,1.,0.));+#64 = PCURVE('',#32,#65);+#65 = DEFINITIONAL_REPRESENTATION('',(#66),#70);+#66 = LINE('',#67,#68);+#67 = CARTESIAN_POINT('',(0.,0.));+#68 = VECTOR('',#69,1.);+#69 = DIRECTION('',(0.,-1.));+#70 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#71 = PCURVE('',#72,#77);+#72 = PLANE('',#73);+#73 = AXIS2_PLACEMENT_3D('',#74,#75,#76);+#74 = CARTESIAN_POINT('',(-2.2,-3.25,0.1));+#75 = DIRECTION('',(0.,0.,1.));+#76 = DIRECTION('',(1.,0.,0.));+#77 = DEFINITIONAL_REPRESENTATION('',(#78),#82);+#78 = LINE('',#79,#80);+#79 = CARTESIAN_POINT('',(0.,0.));+#80 = VECTOR('',#81,1.);+#81 = DIRECTION('',(0.,1.));+#82 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#83 = ORIENTED_EDGE('',*,*,#84,.T.);+#84 = EDGE_CURVE('',#57,#85,#87,.T.);+#85 = VERTEX_POINT('',#86);+#86 = CARTESIAN_POINT('',(-2.2,3.25,1.12));+#87 = SURFACE_CURVE('',#88,(#92,#99),.PCURVE_S1.);+#88 = LINE('',#89,#90);+#89 = CARTESIAN_POINT('',(-2.2,3.25,0.1));+#90 = VECTOR('',#91,1.);+#91 = DIRECTION('',(0.,0.,1.));+#92 = PCURVE('',#32,#93);+#93 = DEFINITIONAL_REPRESENTATION('',(#94),#98);+#94 = LINE('',#95,#96);+#95 = CARTESIAN_POINT('',(0.,-6.5));+#96 = VECTOR('',#97,1.);+#97 = DIRECTION('',(1.,0.));+#98 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#99 = PCURVE('',#100,#105);+#100 = PLANE('',#101);+#101 = AXIS2_PLACEMENT_3D('',#102,#103,#104);+#102 = CARTESIAN_POINT('',(-2.2,3.25,0.1));+#103 = DIRECTION('',(0.,1.,0.));+#104 = DIRECTION('',(0.,0.,1.));+#105 = DEFINITIONAL_REPRESENTATION('',(#106),#110);+#106 = LINE('',#107,#108);+#107 = CARTESIAN_POINT('',(0.,0.));+#108 = VECTOR('',#109,1.);+#109 = DIRECTION('',(1.,0.));+#110 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#111 = ORIENTED_EDGE('',*,*,#112,.F.);+#112 = EDGE_CURVE('',#24,#85,#113,.T.);+#113 = SURFACE_CURVE('',#114,(#118,#125),.PCURVE_S1.);+#114 = LINE('',#115,#116);+#115 = CARTESIAN_POINT('',(-2.2,-3.25,1.12));+#116 = VECTOR('',#117,1.);+#117 = DIRECTION('',(0.,1.,0.));+#118 = PCURVE('',#32,#119);+#119 = DEFINITIONAL_REPRESENTATION('',(#120),#124);+#120 = LINE('',#121,#122);+#121 = CARTESIAN_POINT('',(1.02,0.));+#122 = VECTOR('',#123,1.);+#123 = DIRECTION('',(0.,-1.));+#124 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#125 = PCURVE('',#126,#131);+#126 = PLANE('',#127);+#127 = AXIS2_PLACEMENT_3D('',#128,#129,#130);+#128 = CARTESIAN_POINT('',(-2.16,-3.25,1.16));+#129 = DIRECTION('',(0.707106781187,0.,-0.707106781187));+#130 = DIRECTION('',(0.,1.,0.));+#131 = DEFINITIONAL_REPRESENTATION('',(#132),#136);+#132 = LINE('',#133,#134);+#133 = CARTESIAN_POINT('',(0.,-5.656854249492E-02));+#134 = VECTOR('',#135,1.);+#135 = DIRECTION('',(1.,0.));+#136 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#137 = ADVANCED_FACE('',(#138),#44,.F.);+#138 = FACE_BOUND('',#139,.F.);+#139 = EDGE_LOOP('',(#140,#170,#191,#192));+#140 = ORIENTED_EDGE('',*,*,#141,.F.);+#141 = EDGE_CURVE('',#142,#144,#146,.T.);+#142 = VERTEX_POINT('',#143);+#143 = CARTESIAN_POINT('',(2.2,-3.25,0.1));+#144 = VERTEX_POINT('',#145);+#145 = CARTESIAN_POINT('',(2.2,-3.25,1.12));+#146 = SURFACE_CURVE('',#147,(#151,#158),.PCURVE_S1.);+#147 = LINE('',#148,#149);+#148 = CARTESIAN_POINT('',(2.2,-3.25,0.1));+#149 = VECTOR('',#150,1.);+#150 = DIRECTION('',(0.,0.,1.));+#151 = PCURVE('',#44,#152);+#152 = DEFINITIONAL_REPRESENTATION('',(#153),#157);+#153 = LINE('',#154,#155);+#154 = CARTESIAN_POINT('',(0.,4.4));+#155 = VECTOR('',#156,1.);+#156 = DIRECTION('',(1.,0.));+#157 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#158 = PCURVE('',#159,#164);+#159 = PLANE('',#160);+#160 = AXIS2_PLACEMENT_3D('',#161,#162,#163);+#161 = CARTESIAN_POINT('',(2.2,-3.25,0.1));+#162 = DIRECTION('',(1.,0.,0.));+#163 = DIRECTION('',(0.,0.,1.));+#164 = DEFINITIONAL_REPRESENTATION('',(#165),#169);+#165 = LINE('',#166,#167);+#166 = CARTESIAN_POINT('',(0.,0.));+#167 = VECTOR('',#168,1.);+#168 = DIRECTION('',(1.,0.));+#169 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#170 = ORIENTED_EDGE('',*,*,#171,.F.);+#171 = EDGE_CURVE('',#22,#142,#172,.T.);+#172 = SURFACE_CURVE('',#173,(#177,#184),.PCURVE_S1.);+#173 = LINE('',#174,#175);+#174 = CARTESIAN_POINT('',(-2.2,-3.25,0.1));+#175 = VECTOR('',#176,1.);+#176 = DIRECTION('',(1.,0.,0.));+#177 = PCURVE('',#44,#178);+#178 = DEFINITIONAL_REPRESENTATION('',(#179),#183);+#179 = LINE('',#180,#181);+#180 = CARTESIAN_POINT('',(0.,0.));+#181 = VECTOR('',#182,1.);+#182 = DIRECTION('',(0.,1.));+#183 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#184 = PCURVE('',#72,#185);+#185 = DEFINITIONAL_REPRESENTATION('',(#186),#190);+#186 = LINE('',#187,#188);+#187 = CARTESIAN_POINT('',(0.,0.));+#188 = VECTOR('',#189,1.);+#189 = DIRECTION('',(1.,0.));+#190 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#191 = ORIENTED_EDGE('',*,*,#21,.T.);+#192 = ORIENTED_EDGE('',*,*,#193,.T.);+#193 = EDGE_CURVE('',#24,#144,#194,.T.);+#194 = SURFACE_CURVE('',#195,(#199,#206),.PCURVE_S1.);+#195 = LINE('',#196,#197);+#196 = CARTESIAN_POINT('',(-2.2,-3.25,1.12));+#197 = VECTOR('',#198,1.);+#198 = DIRECTION('',(1.,0.,0.));+#199 = PCURVE('',#44,#200);+#200 = DEFINITIONAL_REPRESENTATION('',(#201),#205);+#201 = LINE('',#202,#203);+#202 = CARTESIAN_POINT('',(1.02,0.));+#203 = VECTOR('',#204,1.);+#204 = DIRECTION('',(0.,1.));+#205 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#206 = PCURVE('',#207,#212);+#207 = PLANE('',#208);+#208 = AXIS2_PLACEMENT_3D('',#209,#210,#211);+#209 = CARTESIAN_POINT('',(-2.2,-3.21,1.16));+#210 = DIRECTION('',(0.,0.707106781187,-0.707106781187));+#211 = DIRECTION('',(-1.,0.,0.));+#212 = DEFINITIONAL_REPRESENTATION('',(#213),#217);+#213 = LINE('',#214,#215);+#214 = CARTESIAN_POINT('',(0.,-5.656854249492E-02));+#215 = VECTOR('',#216,1.);+#216 = DIRECTION('',(-1.,0.));+#217 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#218 = ADVANCED_FACE('',(#219),#126,.F.);+#219 = FACE_BOUND('',#220,.F.);+#220 = EDGE_LOOP('',(#221,#244,#245,#273));+#221 = ORIENTED_EDGE('',*,*,#222,.F.);+#222 = EDGE_CURVE('',#24,#223,#225,.T.);+#223 = VERTEX_POINT('',#224);+#224 = CARTESIAN_POINT('',(-2.12,-3.17,1.2));+#225 = SURFACE_CURVE('',#226,(#230,#237),.PCURVE_S1.);+#226 = LINE('',#227,#228);+#227 = CARTESIAN_POINT('',(-2.173333333333,-3.223333333333,+ 1.146666666667));+#228 = VECTOR('',#229,1.);+#229 = DIRECTION('',(0.57735026919,0.57735026919,0.57735026919));+#230 = PCURVE('',#126,#231);+#231 = DEFINITIONAL_REPRESENTATION('',(#232),#236);+#232 = LINE('',#233,#234);+#233 = CARTESIAN_POINT('',(2.6666666667E-02,-1.885618083117E-02));+#234 = VECTOR('',#235,1.);+#235 = DIRECTION('',(0.57735026919,0.816496580928));+#236 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#237 = PCURVE('',#207,#238);+#238 = DEFINITIONAL_REPRESENTATION('',(#239),#243);+#239 = LINE('',#240,#241);+#240 = CARTESIAN_POINT('',(-2.6666666667E-02,-1.885618083117E-02));+#241 = VECTOR('',#242,1.);+#242 = DIRECTION('',(-0.57735026919,0.816496580928));+#243 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#244 = ORIENTED_EDGE('',*,*,#112,.T.);+#245 = ORIENTED_EDGE('',*,*,#246,.T.);+#246 = EDGE_CURVE('',#85,#247,#249,.T.);+#247 = VERTEX_POINT('',#248);+#248 = CARTESIAN_POINT('',(-2.12,3.17,1.2));+#249 = SURFACE_CURVE('',#250,(#254,#261),.PCURVE_S1.);+#250 = LINE('',#251,#252);+#251 = CARTESIAN_POINT('',(-1.09,2.14,2.23));+#252 = VECTOR('',#253,1.);+#253 = DIRECTION('',(0.57735026919,-0.57735026919,0.57735026919));+#254 = PCURVE('',#126,#255);+#255 = DEFINITIONAL_REPRESENTATION('',(#256),#260);+#256 = LINE('',#257,#258);+#257 = CARTESIAN_POINT('',(5.39,1.513208511739));+#258 = VECTOR('',#259,1.);+#259 = DIRECTION('',(-0.57735026919,0.816496580928));+#260 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#261 = PCURVE('',#262,#267);+#262 = PLANE('',#263);+#263 = AXIS2_PLACEMENT_3D('',#264,#265,#266);+#264 = CARTESIAN_POINT('',(-2.2,3.21,1.16));+#265 = DIRECTION('',(0.,0.707106781187,0.707106781187));+#266 = DIRECTION('',(-1.,0.,0.));+#267 = DEFINITIONAL_REPRESENTATION('',(#268),#272);+#268 = LINE('',#269,#270);+#269 = CARTESIAN_POINT('',(-1.11,1.513208511739));+#270 = VECTOR('',#271,1.);+#271 = DIRECTION('',(-0.57735026919,0.816496580928));+#272 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#273 = ORIENTED_EDGE('',*,*,#274,.F.);+#274 = EDGE_CURVE('',#223,#247,#275,.T.);+#275 = SURFACE_CURVE('',#276,(#280,#287),.PCURVE_S1.);+#276 = LINE('',#277,#278);+#277 = CARTESIAN_POINT('',(-2.12,-3.25,1.2));+#278 = VECTOR('',#279,1.);+#279 = DIRECTION('',(0.,1.,0.));+#280 = PCURVE('',#126,#281);+#281 = DEFINITIONAL_REPRESENTATION('',(#282),#286);+#282 = LINE('',#283,#284);+#283 = CARTESIAN_POINT('',(0.,5.656854249492E-02));+#284 = VECTOR('',#285,1.);+#285 = DIRECTION('',(1.,0.));+#286 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#287 = PCURVE('',#288,#293);+#288 = PLANE('',#289);+#289 = AXIS2_PLACEMENT_3D('',#290,#291,#292);+#290 = CARTESIAN_POINT('',(-2.2,-3.25,1.2));+#291 = DIRECTION('',(0.,0.,1.));+#292 = DIRECTION('',(1.,0.,0.));+#293 = DEFINITIONAL_REPRESENTATION('',(#294),#298);+#294 = LINE('',#295,#296);+#295 = CARTESIAN_POINT('',(8.E-02,0.));+#296 = VECTOR('',#297,1.);+#297 = DIRECTION('',(0.,1.));+#298 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#299 = ADVANCED_FACE('',(#300),#72,.F.);+#300 = FACE_BOUND('',#301,.F.);+#301 = EDGE_LOOP('',(#302,#303,#304,#327));+#302 = ORIENTED_EDGE('',*,*,#56,.F.);+#303 = ORIENTED_EDGE('',*,*,#171,.T.);+#304 = ORIENTED_EDGE('',*,*,#305,.T.);+#305 = EDGE_CURVE('',#142,#306,#308,.T.);+#306 = VERTEX_POINT('',#307);+#307 = CARTESIAN_POINT('',(2.2,3.25,0.1));+#308 = SURFACE_CURVE('',#309,(#313,#320),.PCURVE_S1.);+#309 = LINE('',#310,#311);+#310 = CARTESIAN_POINT('',(2.2,-3.25,0.1));+#311 = VECTOR('',#312,1.);+#312 = DIRECTION('',(0.,1.,0.));+#313 = PCURVE('',#72,#314);+#314 = DEFINITIONAL_REPRESENTATION('',(#315),#319);+#315 = LINE('',#316,#317);+#316 = CARTESIAN_POINT('',(4.4,0.));+#317 = VECTOR('',#318,1.);+#318 = DIRECTION('',(0.,1.));+#319 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#320 = PCURVE('',#159,#321);+#321 = DEFINITIONAL_REPRESENTATION('',(#322),#326);+#322 = LINE('',#323,#324);+#323 = CARTESIAN_POINT('',(0.,0.));+#324 = VECTOR('',#325,1.);+#325 = DIRECTION('',(0.,-1.));+#326 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#327 = ORIENTED_EDGE('',*,*,#328,.F.);+#328 = EDGE_CURVE('',#57,#306,#329,.T.);+#329 = SURFACE_CURVE('',#330,(#334,#341),.PCURVE_S1.);+#330 = LINE('',#331,#332);+#331 = CARTESIAN_POINT('',(-2.2,3.25,0.1));+#332 = VECTOR('',#333,1.);+#333 = DIRECTION('',(1.,0.,0.));+#334 = PCURVE('',#72,#335);+#335 = DEFINITIONAL_REPRESENTATION('',(#336),#340);+#336 = LINE('',#337,#338);+#337 = CARTESIAN_POINT('',(0.,6.5));+#338 = VECTOR('',#339,1.);+#339 = DIRECTION('',(1.,0.));+#340 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#341 = PCURVE('',#100,#342);+#342 = DEFINITIONAL_REPRESENTATION('',(#343),#347);+#343 = LINE('',#344,#345);+#344 = CARTESIAN_POINT('',(0.,0.));+#345 = VECTOR('',#346,1.);+#346 = DIRECTION('',(0.,1.));+#347 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#348 = ADVANCED_FACE('',(#349),#100,.T.);+#349 = FACE_BOUND('',#350,.T.);+#350 = EDGE_LOOP('',(#351,#374,#375,#376));+#351 = ORIENTED_EDGE('',*,*,#352,.F.);+#352 = EDGE_CURVE('',#306,#353,#355,.T.);+#353 = VERTEX_POINT('',#354);+#354 = CARTESIAN_POINT('',(2.2,3.25,1.12));+#355 = SURFACE_CURVE('',#356,(#360,#367),.PCURVE_S1.);+#356 = LINE('',#357,#358);+#357 = CARTESIAN_POINT('',(2.2,3.25,0.1));+#358 = VECTOR('',#359,1.);+#359 = DIRECTION('',(0.,0.,1.));+#360 = PCURVE('',#100,#361);+#361 = DEFINITIONAL_REPRESENTATION('',(#362),#366);+#362 = LINE('',#363,#364);+#363 = CARTESIAN_POINT('',(0.,4.4));+#364 = VECTOR('',#365,1.);+#365 = DIRECTION('',(1.,0.));+#366 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#367 = PCURVE('',#159,#368);+#368 = DEFINITIONAL_REPRESENTATION('',(#369),#373);+#369 = LINE('',#370,#371);+#370 = CARTESIAN_POINT('',(0.,-6.5));+#371 = VECTOR('',#372,1.);+#372 = DIRECTION('',(1.,0.));+#373 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#374 = ORIENTED_EDGE('',*,*,#328,.F.);+#375 = ORIENTED_EDGE('',*,*,#84,.T.);+#376 = ORIENTED_EDGE('',*,*,#377,.T.);+#377 = EDGE_CURVE('',#85,#353,#378,.T.);+#378 = SURFACE_CURVE('',#379,(#383,#390),.PCURVE_S1.);+#379 = LINE('',#380,#381);+#380 = CARTESIAN_POINT('',(-2.2,3.25,1.12));+#381 = VECTOR('',#382,1.);+#382 = DIRECTION('',(1.,0.,0.));+#383 = PCURVE('',#100,#384);+#384 = DEFINITIONAL_REPRESENTATION('',(#385),#389);+#385 = LINE('',#386,#387);+#386 = CARTESIAN_POINT('',(1.02,0.));+#387 = VECTOR('',#388,1.);+#388 = DIRECTION('',(0.,1.));+#389 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#390 = PCURVE('',#262,#391);+#391 = DEFINITIONAL_REPRESENTATION('',(#392),#396);+#392 = LINE('',#393,#394);+#393 = CARTESIAN_POINT('',(0.,-5.656854249492E-02));+#394 = VECTOR('',#395,1.);+#395 = DIRECTION('',(-1.,0.));+#396 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#397 = ADVANCED_FACE('',(#398),#159,.T.);+#398 = FACE_BOUND('',#399,.T.);+#399 = EDGE_LOOP('',(#400,#401,#402,#403));+#400 = ORIENTED_EDGE('',*,*,#141,.F.);+#401 = ORIENTED_EDGE('',*,*,#305,.T.);+#402 = ORIENTED_EDGE('',*,*,#352,.T.);+#403 = ORIENTED_EDGE('',*,*,#404,.F.);+#404 = EDGE_CURVE('',#144,#353,#405,.T.);+#405 = SURFACE_CURVE('',#406,(#410,#417),.PCURVE_S1.);+#406 = LINE('',#407,#408);+#407 = CARTESIAN_POINT('',(2.2,-3.25,1.12));+#408 = VECTOR('',#409,1.);+#409 = DIRECTION('',(0.,1.,0.));+#410 = PCURVE('',#159,#411);+#411 = DEFINITIONAL_REPRESENTATION('',(#412),#416);+#412 = LINE('',#413,#414);+#413 = CARTESIAN_POINT('',(1.02,0.));+#414 = VECTOR('',#415,1.);+#415 = DIRECTION('',(0.,-1.));+#416 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#417 = PCURVE('',#418,#423);+#418 = PLANE('',#419);+#419 = AXIS2_PLACEMENT_3D('',#420,#421,#422);+#420 = CARTESIAN_POINT('',(2.16,-3.25,1.16));+#421 = DIRECTION('',(0.707106781187,0.,0.707106781187));+#422 = DIRECTION('',(0.,1.,0.));+#423 = DEFINITIONAL_REPRESENTATION('',(#424),#428);+#424 = LINE('',#425,#426);+#425 = CARTESIAN_POINT('',(0.,-5.656854249492E-02));+#426 = VECTOR('',#427,1.);+#427 = DIRECTION('',(1.,0.));+#428 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#429 = ADVANCED_FACE('',(#430),#207,.F.);+#430 = FACE_BOUND('',#431,.T.);+#431 = EDGE_LOOP('',(#432,#433,#434,#457));+#432 = ORIENTED_EDGE('',*,*,#222,.F.);+#433 = ORIENTED_EDGE('',*,*,#193,.T.);+#434 = ORIENTED_EDGE('',*,*,#435,.T.);+#435 = EDGE_CURVE('',#144,#436,#438,.T.);+#436 = VERTEX_POINT('',#437);+#437 = CARTESIAN_POINT('',(2.12,-3.17,1.2));+#438 = SURFACE_CURVE('',#439,(#443,#450),.PCURVE_S1.);+#439 = LINE('',#440,#441);+#440 = CARTESIAN_POINT('',(1.44,-2.49,1.88));+#441 = VECTOR('',#442,1.);+#442 = DIRECTION('',(-0.57735026919,0.57735026919,0.57735026919));+#443 = PCURVE('',#207,#444);+#444 = DEFINITIONAL_REPRESENTATION('',(#445),#449);+#445 = LINE('',#446,#447);+#446 = CARTESIAN_POINT('',(-3.64,1.018233764909));+#447 = VECTOR('',#448,1.);+#448 = DIRECTION('',(0.57735026919,0.816496580928));+#449 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#450 = PCURVE('',#418,#451);+#451 = DEFINITIONAL_REPRESENTATION('',(#452),#456);+#452 = LINE('',#453,#454);+#453 = CARTESIAN_POINT('',(0.76,1.018233764909));+#454 = VECTOR('',#455,1.);+#455 = DIRECTION('',(0.57735026919,0.816496580928));+#456 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#457 = ORIENTED_EDGE('',*,*,#458,.F.);+#458 = EDGE_CURVE('',#223,#436,#459,.T.);+#459 = SURFACE_CURVE('',#460,(#464,#471),.PCURVE_S1.);+#460 = LINE('',#461,#462);+#461 = CARTESIAN_POINT('',(-2.2,-3.17,1.2));+#462 = VECTOR('',#463,1.);+#463 = DIRECTION('',(1.,0.,0.));+#464 = PCURVE('',#207,#465);+#465 = DEFINITIONAL_REPRESENTATION('',(#466),#470);+#466 = LINE('',#467,#468);+#467 = CARTESIAN_POINT('',(0.,5.656854249492E-02));+#468 = VECTOR('',#469,1.);+#469 = DIRECTION('',(-1.,0.));+#470 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#471 = PCURVE('',#288,#472);+#472 = DEFINITIONAL_REPRESENTATION('',(#473),#477);+#473 = LINE('',#474,#475);+#474 = CARTESIAN_POINT('',(0.,8.E-02));+#475 = VECTOR('',#476,1.);+#476 = DIRECTION('',(1.,0.));+#477 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#478 = ADVANCED_FACE('',(#479,#527),#288,.T.);+#479 = FACE_BOUND('',#480,.T.);+#480 = EDGE_LOOP('',(#481,#482,#483,#506));+#481 = ORIENTED_EDGE('',*,*,#274,.F.);+#482 = ORIENTED_EDGE('',*,*,#458,.T.);+#483 = ORIENTED_EDGE('',*,*,#484,.T.);+#484 = EDGE_CURVE('',#436,#485,#487,.T.);+#485 = VERTEX_POINT('',#486);+#486 = CARTESIAN_POINT('',(2.12,3.17,1.2));+#487 = SURFACE_CURVE('',#488,(#492,#499),.PCURVE_S1.);+#488 = LINE('',#489,#490);+#489 = CARTESIAN_POINT('',(2.12,-3.25,1.2));+#490 = VECTOR('',#491,1.);+#491 = DIRECTION('',(0.,1.,0.));+#492 = PCURVE('',#288,#493);+#493 = DEFINITIONAL_REPRESENTATION('',(#494),#498);+#494 = LINE('',#495,#496);+#495 = CARTESIAN_POINT('',(4.32,0.));+#496 = VECTOR('',#497,1.);+#497 = DIRECTION('',(0.,1.));+#498 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#499 = PCURVE('',#418,#500);+#500 = DEFINITIONAL_REPRESENTATION('',(#501),#505);+#501 = LINE('',#502,#503);+#502 = CARTESIAN_POINT('',(0.,5.656854249492E-02));+#503 = VECTOR('',#504,1.);+#504 = DIRECTION('',(1.,0.));+#505 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#506 = ORIENTED_EDGE('',*,*,#507,.F.);+#507 = EDGE_CURVE('',#247,#485,#508,.T.);+#508 = SURFACE_CURVE('',#509,(#513,#520),.PCURVE_S1.);+#509 = LINE('',#510,#511);+#510 = CARTESIAN_POINT('',(-2.2,3.17,1.2));+#511 = VECTOR('',#512,1.);+#512 = DIRECTION('',(1.,0.,0.));+#513 = PCURVE('',#288,#514);+#514 = DEFINITIONAL_REPRESENTATION('',(#515),#519);+#515 = LINE('',#516,#517);+#516 = CARTESIAN_POINT('',(0.,6.42));+#517 = VECTOR('',#518,1.);+#518 = DIRECTION('',(1.,0.));+#519 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#520 = PCURVE('',#262,#521);+#521 = DEFINITIONAL_REPRESENTATION('',(#522),#526);+#522 = LINE('',#523,#524);+#523 = CARTESIAN_POINT('',(0.,5.656854249492E-02));+#524 = VECTOR('',#525,1.);+#525 = DIRECTION('',(-1.,0.));+#526 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#527 = FACE_BOUND('',#528,.T.);+#528 = EDGE_LOOP('',(#529));+#529 = ORIENTED_EDGE('',*,*,#530,.T.);+#530 = EDGE_CURVE('',#531,#531,#533,.T.);+#531 = VERTEX_POINT('',#532);+#532 = CARTESIAN_POINT('',(-1.32,2.678,1.2));+#533 = SURFACE_CURVE('',#534,(#539,#550),.PCURVE_S1.);+#534 = CIRCLE('',#535,0.308);+#535 = AXIS2_PLACEMENT_3D('',#536,#537,#538);+#536 = CARTESIAN_POINT('',(-1.628,2.678,1.2));+#537 = DIRECTION('',(0.,0.,-1.));+#538 = DIRECTION('',(1.,0.,0.));+#539 = PCURVE('',#288,#540);+#540 = DEFINITIONAL_REPRESENTATION('',(#541),#549);+#541 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#542,#543,#544,#545,#546,#547+,#548),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(+ -2.094395102393,0.,2.094395102393,4.188790204786,6.28318530718,+8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#542 = CARTESIAN_POINT('',(0.88,5.928));+#543 = CARTESIAN_POINT('',(0.88,5.394528351269));+#544 = CARTESIAN_POINT('',(0.418,5.661264175634));+#545 = CARTESIAN_POINT('',(-4.4E-02,5.928));+#546 = CARTESIAN_POINT('',(0.418,6.194735824366));+#547 = CARTESIAN_POINT('',(0.88,6.461471648731));+#548 = CARTESIAN_POINT('',(0.88,5.928));+#549 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#550 = PCURVE('',#551,#556);+#551 = CYLINDRICAL_SURFACE('',#552,0.308);+#552 = AXIS2_PLACEMENT_3D('',#553,#554,#555);+#553 = CARTESIAN_POINT('',(-1.628,2.678,1.15));+#554 = DIRECTION('',(-0.,-0.,-1.));+#555 = DIRECTION('',(1.,0.,0.));+#556 = DEFINITIONAL_REPRESENTATION('',(#557),#561);+#557 = LINE('',#558,#559);+#558 = CARTESIAN_POINT('',(-4.138911435803E-13,-5.E-02));+#559 = VECTOR('',#560,1.);+#560 = DIRECTION('',(1.,-0.));+#561 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#562 = ADVANCED_FACE('',(#563),#262,.T.);+#563 = FACE_BOUND('',#564,.F.);+#564 = EDGE_LOOP('',(#565,#566,#567,#588));+#565 = ORIENTED_EDGE('',*,*,#246,.F.);+#566 = ORIENTED_EDGE('',*,*,#377,.T.);+#567 = ORIENTED_EDGE('',*,*,#568,.T.);+#568 = EDGE_CURVE('',#353,#485,#569,.T.);+#569 = SURFACE_CURVE('',#570,(#574,#581),.PCURVE_S1.);+#570 = LINE('',#571,#572);+#571 = CARTESIAN_POINT('',(0.356666666667,1.406666666667,2.963333333333)+ );+#572 = VECTOR('',#573,1.);+#573 = DIRECTION('',(-0.57735026919,-0.57735026919,0.57735026919));+#574 = PCURVE('',#262,#575);+#575 = DEFINITIONAL_REPRESENTATION('',(#576),#580);+#576 = LINE('',#577,#578);+#577 = CARTESIAN_POINT('',(-2.556666666667,2.550298457479));+#578 = VECTOR('',#579,1.);+#579 = DIRECTION('',(0.57735026919,0.816496580928));+#580 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#581 = PCURVE('',#418,#582);+#582 = DEFINITIONAL_REPRESENTATION('',(#583),#587);+#583 = LINE('',#584,#585);+#584 = CARTESIAN_POINT('',(4.656666666667,2.550298457479));+#585 = VECTOR('',#586,1.);+#586 = DIRECTION('',(-0.57735026919,0.816496580928));+#587 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#588 = ORIENTED_EDGE('',*,*,#507,.F.);+#589 = ADVANCED_FACE('',(#590),#418,.T.);+#590 = FACE_BOUND('',#591,.T.);+#591 = EDGE_LOOP('',(#592,#593,#594,#595));+#592 = ORIENTED_EDGE('',*,*,#435,.F.);+#593 = ORIENTED_EDGE('',*,*,#404,.T.);+#594 = ORIENTED_EDGE('',*,*,#568,.T.);+#595 = ORIENTED_EDGE('',*,*,#484,.F.);+#596 = ADVANCED_FACE('',(#597),#551,.F.);+#597 = FACE_BOUND('',#598,.F.);+#598 = EDGE_LOOP('',(#599,#622,#623,#624));+#599 = ORIENTED_EDGE('',*,*,#600,.T.);+#600 = EDGE_CURVE('',#601,#531,#603,.T.);+#601 = VERTEX_POINT('',#602);+#602 = CARTESIAN_POINT('',(-1.32,2.678,1.15));+#603 = SEAM_CURVE('',#604,(#608,#615),.PCURVE_S1.);+#604 = LINE('',#605,#606);+#605 = CARTESIAN_POINT('',(-1.32,2.678,1.15));+#606 = VECTOR('',#607,1.);+#607 = DIRECTION('',(0.,0.,1.));+#608 = PCURVE('',#551,#609);+#609 = DEFINITIONAL_REPRESENTATION('',(#610),#614);+#610 = LINE('',#611,#612);+#611 = CARTESIAN_POINT('',(-4.138911435803E-13,0.));+#612 = VECTOR('',#613,1.);+#613 = DIRECTION('',(-0.,-1.));+#614 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#615 = PCURVE('',#551,#616);+#616 = DEFINITIONAL_REPRESENTATION('',(#617),#621);+#617 = LINE('',#618,#619);+#618 = CARTESIAN_POINT('',(6.28318530718,0.));+#619 = VECTOR('',#620,1.);+#620 = DIRECTION('',(-0.,-1.));+#621 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#622 = ORIENTED_EDGE('',*,*,#530,.T.);+#623 = ORIENTED_EDGE('',*,*,#600,.F.);+#624 = ORIENTED_EDGE('',*,*,#625,.T.);+#625 = EDGE_CURVE('',#601,#601,#626,.T.);+#626 = SURFACE_CURVE('',#627,(#632,#639),.PCURVE_S1.);+#627 = CIRCLE('',#628,0.308);+#628 = AXIS2_PLACEMENT_3D('',#629,#630,#631);+#629 = CARTESIAN_POINT('',(-1.628,2.678,1.15));+#630 = DIRECTION('',(0.,0.,1.));+#631 = DIRECTION('',(1.,0.,0.));+#632 = PCURVE('',#551,#633);+#633 = DEFINITIONAL_REPRESENTATION('',(#634),#638);+#634 = LINE('',#635,#636);+#635 = CARTESIAN_POINT('',(6.28318530718,0.));+#636 = VECTOR('',#637,1.);+#637 = DIRECTION('',(-1.,0.));+#638 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#639 = PCURVE('',#640,#645);+#640 = PLANE('',#641);+#641 = AXIS2_PLACEMENT_3D('',#642,#643,#644);+#642 = CARTESIAN_POINT('',(-1.628,2.678,1.15));+#643 = DIRECTION('',(0.,0.,1.));+#644 = DIRECTION('',(1.,0.,0.));+#645 = DEFINITIONAL_REPRESENTATION('',(#646),#650);+#646 = CIRCLE('',#647,0.308);+#647 = AXIS2_PLACEMENT_2D('',#648,#649);+#648 = CARTESIAN_POINT('',(0.,0.));+#649 = DIRECTION('',(1.,0.));+#650 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#651 = ADVANCED_FACE('',(#652),#640,.T.);+#652 = FACE_BOUND('',#653,.T.);+#653 = EDGE_LOOP('',(#654));+#654 = ORIENTED_EDGE('',*,*,#625,.T.);+#655 = MANIFOLD_SOLID_BREP('',#656);+#656 = CLOSED_SHELL('',(#657,#777,#965,#1036,#1085,#1134,#1183,#1232,+ #1259,#1290));+#657 = ADVANCED_FACE('',(#658),#672,.F.);+#658 = FACE_BOUND('',#659,.F.);+#659 = EDGE_LOOP('',(#660,#695,#723,#751));+#660 = ORIENTED_EDGE('',*,*,#661,.F.);+#661 = EDGE_CURVE('',#662,#664,#666,.T.);+#662 = VERTEX_POINT('',#663);+#663 = CARTESIAN_POINT('',(-2.15,2.775,0.595));+#664 = VERTEX_POINT('',#665);+#665 = CARTESIAN_POINT('',(-2.15,3.075,0.595));+#666 = SURFACE_CURVE('',#667,(#671,#683),.PCURVE_S1.);+#667 = LINE('',#668,#669);+#668 = CARTESIAN_POINT('',(-2.15,2.775,0.595));+#669 = VECTOR('',#670,1.);+#670 = DIRECTION('',(0.,1.,0.));+#671 = PCURVE('',#672,#677);+#672 = PLANE('',#673);+#673 = AXIS2_PLACEMENT_3D('',#674,#675,#676);+#674 = CARTESIAN_POINT('',(-2.15,2.925,0.595));+#675 = DIRECTION('',(-0.,-0.,-1.));+#676 = DIRECTION('',(-1.,0.,0.));+#677 = DEFINITIONAL_REPRESENTATION('',(#678),#682);+#678 = LINE('',#679,#680);+#679 = CARTESIAN_POINT('',(0.,-0.15));+#680 = VECTOR('',#681,1.);+#681 = DIRECTION('',(0.,1.));+#682 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#683 = PCURVE('',#684,#689);+#684 = PLANE('',#685);+#685 = AXIS2_PLACEMENT_3D('',#686,#687,#688);+#686 = CARTESIAN_POINT('',(-2.15,2.925,0.445));+#687 = DIRECTION('',(-1.,0.,0.));+#688 = DIRECTION('',(0.,0.,1.));+#689 = DEFINITIONAL_REPRESENTATION('',(#690),#694);+#690 = LINE('',#691,#692);+#691 = CARTESIAN_POINT('',(0.15,-0.15));+#692 = VECTOR('',#693,1.);+#693 = DIRECTION('',(0.,1.));+#694 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#695 = ORIENTED_EDGE('',*,*,#696,.T.);+#696 = EDGE_CURVE('',#662,#697,#699,.T.);+#697 = VERTEX_POINT('',#698);+#698 = CARTESIAN_POINT('',(-2.35,2.775,0.595));+#699 = SURFACE_CURVE('',#700,(#704,#711),.PCURVE_S1.);+#700 = LINE('',#701,#702);+#701 = CARTESIAN_POINT('',(-2.15,2.775,0.595));+#702 = VECTOR('',#703,1.);+#703 = DIRECTION('',(-1.,0.,0.));+#704 = PCURVE('',#672,#705);+#705 = DEFINITIONAL_REPRESENTATION('',(#706),#710);+#706 = LINE('',#707,#708);+#707 = CARTESIAN_POINT('',(0.,-0.15));+#708 = VECTOR('',#709,1.);+#709 = DIRECTION('',(1.,0.));+#710 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#711 = PCURVE('',#712,#717);+#712 = PLANE('',#713);+#713 = AXIS2_PLACEMENT_3D('',#714,#715,#716);+#714 = CARTESIAN_POINT('',(-2.634182274245,2.775,0.217942023204));+#715 = DIRECTION('',(-0.,-1.,-0.));+#716 = DIRECTION('',(0.,0.,-1.));+#717 = DEFINITIONAL_REPRESENTATION('',(#718),#722);+#718 = LINE('',#719,#720);+#719 = CARTESIAN_POINT('',(-0.377057976796,0.484182274245));+#720 = VECTOR('',#721,1.);+#721 = DIRECTION('',(0.,-1.));+#722 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#723 = ORIENTED_EDGE('',*,*,#724,.F.);+#724 = EDGE_CURVE('',#725,#697,#727,.T.);+#725 = VERTEX_POINT('',#726);+#726 = CARTESIAN_POINT('',(-2.35,3.075,0.595));+#727 = SURFACE_CURVE('',#728,(#732,#739),.PCURVE_S1.);+#728 = LINE('',#729,#730);+#729 = CARTESIAN_POINT('',(-2.35,3.075,0.595));+#730 = VECTOR('',#731,1.);+#731 = DIRECTION('',(0.,-1.,0.));+#732 = PCURVE('',#672,#733);+#733 = DEFINITIONAL_REPRESENTATION('',(#734),#738);+#734 = LINE('',#735,#736);+#735 = CARTESIAN_POINT('',(0.2,0.15));+#736 = VECTOR('',#737,1.);+#737 = DIRECTION('',(0.,-1.));+#738 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#739 = PCURVE('',#740,#745);+#740 = PLANE('',#741);+#741 = AXIS2_PLACEMENT_3D('',#742,#743,#744);+#742 = CARTESIAN_POINT('',(-2.35,2.925,0.595));+#743 = DIRECTION('',(0.839949759337,0.,-0.542664170358));+#744 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#745 = DEFINITIONAL_REPRESENTATION('',(#746),#750);+#746 = LINE('',#747,#748);+#747 = CARTESIAN_POINT('',(0.,0.15));+#748 = VECTOR('',#749,1.);+#749 = DIRECTION('',(-0.,-1.));+#750 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#751 = ORIENTED_EDGE('',*,*,#752,.F.);+#752 = EDGE_CURVE('',#664,#725,#753,.T.);+#753 = SURFACE_CURVE('',#754,(#758,#765),.PCURVE_S1.);+#754 = LINE('',#755,#756);+#755 = CARTESIAN_POINT('',(-2.15,3.075,0.595));+#756 = VECTOR('',#757,1.);+#757 = DIRECTION('',(-1.,0.,0.));+#758 = PCURVE('',#672,#759);+#759 = DEFINITIONAL_REPRESENTATION('',(#760),#764);+#760 = LINE('',#761,#762);+#761 = CARTESIAN_POINT('',(0.,0.15));+#762 = VECTOR('',#763,1.);+#763 = DIRECTION('',(1.,0.));+#764 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#765 = PCURVE('',#766,#771);+#766 = PLANE('',#767);+#767 = AXIS2_PLACEMENT_3D('',#768,#769,#770);+#768 = CARTESIAN_POINT('',(-2.634182274245,3.075,0.217942023204));+#769 = DIRECTION('',(-0.,-1.,-0.));+#770 = DIRECTION('',(0.,0.,-1.));+#771 = DEFINITIONAL_REPRESENTATION('',(#772),#776);+#772 = LINE('',#773,#774);+#773 = CARTESIAN_POINT('',(-0.377057976796,0.484182274245));+#774 = VECTOR('',#775,1.);+#775 = DIRECTION('',(0.,-1.));+#776 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#777 = ADVANCED_FACE('',(#778),#766,.F.);+#778 = FACE_BOUND('',#779,.F.);+#779 = EDGE_LOOP('',(#780,#781,#804,#832,#860,#888,#916,#944));+#780 = ORIENTED_EDGE('',*,*,#752,.T.);+#781 = ORIENTED_EDGE('',*,*,#782,.T.);+#782 = EDGE_CURVE('',#725,#783,#785,.T.);+#783 = VERTEX_POINT('',#784);+#784 = CARTESIAN_POINT('',(-2.6375,3.075,0.15));+#785 = SURFACE_CURVE('',#786,(#790,#797),.PCURVE_S1.);+#786 = LINE('',#787,#788);+#787 = CARTESIAN_POINT('',(-2.35,3.075,0.595));+#788 = VECTOR('',#789,1.);+#789 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#790 = PCURVE('',#766,#791);+#791 = DEFINITIONAL_REPRESENTATION('',(#792),#796);+#792 = LINE('',#793,#794);+#793 = CARTESIAN_POINT('',(-0.377057976796,0.284182274245));+#794 = VECTOR('',#795,1.);+#795 = DIRECTION('',(0.839949759337,-0.542664170358));+#796 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#797 = PCURVE('',#740,#798);+#798 = DEFINITIONAL_REPRESENTATION('',(#799),#803);+#799 = LINE('',#800,#801);+#800 = CARTESIAN_POINT('',(0.,0.15));+#801 = VECTOR('',#802,1.);+#802 = DIRECTION('',(1.,0.));+#803 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#804 = ORIENTED_EDGE('',*,*,#805,.T.);+#805 = EDGE_CURVE('',#783,#806,#808,.T.);+#806 = VERTEX_POINT('',#807);+#807 = CARTESIAN_POINT('',(-3.205,3.075,0.15));+#808 = SURFACE_CURVE('',#809,(#813,#820),.PCURVE_S1.);+#809 = LINE('',#810,#811);+#810 = CARTESIAN_POINT('',(-2.6375,3.075,0.15));+#811 = VECTOR('',#812,1.);+#812 = DIRECTION('',(-1.,0.,0.));+#813 = PCURVE('',#766,#814);+#814 = DEFINITIONAL_REPRESENTATION('',(#815),#819);+#815 = LINE('',#816,#817);+#816 = CARTESIAN_POINT('',(6.7942023204E-02,-3.317725755E-03));+#817 = VECTOR('',#818,1.);+#818 = DIRECTION('',(0.,-1.));+#819 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#820 = PCURVE('',#821,#826);+#821 = PLANE('',#822);+#822 = AXIS2_PLACEMENT_3D('',#823,#824,#825);+#823 = CARTESIAN_POINT('',(-2.6375,2.925,0.15));+#824 = DIRECTION('',(-0.,-0.,-1.));+#825 = DIRECTION('',(-1.,0.,0.));+#826 = DEFINITIONAL_REPRESENTATION('',(#827),#831);+#827 = LINE('',#828,#829);+#828 = CARTESIAN_POINT('',(0.,0.15));+#829 = VECTOR('',#830,1.);+#830 = DIRECTION('',(1.,0.));+#831 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#832 = ORIENTED_EDGE('',*,*,#833,.T.);+#833 = EDGE_CURVE('',#806,#834,#836,.T.);+#834 = VERTEX_POINT('',#835);+#835 = CARTESIAN_POINT('',(-3.205,3.075,0.));+#836 = SURFACE_CURVE('',#837,(#841,#848),.PCURVE_S1.);+#837 = LINE('',#838,#839);+#838 = CARTESIAN_POINT('',(-3.205,3.075,0.15));+#839 = VECTOR('',#840,1.);+#840 = DIRECTION('',(0.,0.,-1.));+#841 = PCURVE('',#766,#842);+#842 = DEFINITIONAL_REPRESENTATION('',(#843),#847);+#843 = LINE('',#844,#845);+#844 = CARTESIAN_POINT('',(6.7942023204E-02,-0.570817725755));+#845 = VECTOR('',#846,1.);+#846 = DIRECTION('',(1.,0.));+#847 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#848 = PCURVE('',#849,#854);+#849 = PLANE('',#850);+#850 = AXIS2_PLACEMENT_3D('',#851,#852,#853);+#851 = CARTESIAN_POINT('',(-3.205,2.925,0.15));+#852 = DIRECTION('',(1.,0.,0.));+#853 = DIRECTION('',(0.,0.,-1.));+#854 = DEFINITIONAL_REPRESENTATION('',(#855),#859);+#855 = LINE('',#856,#857);+#856 = CARTESIAN_POINT('',(0.,0.15));+#857 = VECTOR('',#858,1.);+#858 = DIRECTION('',(1.,0.));+#859 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#860 = ORIENTED_EDGE('',*,*,#861,.T.);+#861 = EDGE_CURVE('',#834,#862,#864,.T.);+#862 = VERTEX_POINT('',#863);+#863 = CARTESIAN_POINT('',(-2.4875,3.075,0.));+#864 = SURFACE_CURVE('',#865,(#869,#876),.PCURVE_S1.);+#865 = LINE('',#866,#867);+#866 = CARTESIAN_POINT('',(-3.205,3.075,0.));+#867 = VECTOR('',#868,1.);+#868 = DIRECTION('',(1.,0.,0.));+#869 = PCURVE('',#766,#870);+#870 = DEFINITIONAL_REPRESENTATION('',(#871),#875);+#871 = LINE('',#872,#873);+#872 = CARTESIAN_POINT('',(0.217942023204,-0.570817725755));+#873 = VECTOR('',#874,1.);+#874 = DIRECTION('',(0.,1.));+#875 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#876 = PCURVE('',#877,#882);+#877 = PLANE('',#878);+#878 = AXIS2_PLACEMENT_3D('',#879,#880,#881);+#879 = CARTESIAN_POINT('',(-3.205,2.925,0.));+#880 = DIRECTION('',(0.,0.,1.));+#881 = DIRECTION('',(1.,0.,0.));+#882 = DEFINITIONAL_REPRESENTATION('',(#883),#887);+#883 = LINE('',#884,#885);+#884 = CARTESIAN_POINT('',(0.,0.15));+#885 = VECTOR('',#886,1.);+#886 = DIRECTION('',(1.,0.));+#887 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#888 = ORIENTED_EDGE('',*,*,#889,.T.);+#889 = EDGE_CURVE('',#862,#890,#892,.T.);+#890 = VERTEX_POINT('',#891);+#891 = CARTESIAN_POINT('',(-2.2,3.075,0.445));+#892 = SURFACE_CURVE('',#893,(#897,#904),.PCURVE_S1.);+#893 = LINE('',#894,#895);+#894 = CARTESIAN_POINT('',(-2.4875,3.075,0.));+#895 = VECTOR('',#896,1.);+#896 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#897 = PCURVE('',#766,#898);+#898 = DEFINITIONAL_REPRESENTATION('',(#899),#903);+#899 = LINE('',#900,#901);+#900 = CARTESIAN_POINT('',(0.217942023204,0.146682274245));+#901 = VECTOR('',#902,1.);+#902 = DIRECTION('',(-0.839949759337,0.542664170358));+#903 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#904 = PCURVE('',#905,#910);+#905 = PLANE('',#906);+#906 = AXIS2_PLACEMENT_3D('',#907,#908,#909);+#907 = CARTESIAN_POINT('',(-2.4875,2.925,0.));+#908 = DIRECTION('',(-0.839949759337,0.,0.542664170358));+#909 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#910 = DEFINITIONAL_REPRESENTATION('',(#911),#915);+#911 = LINE('',#912,#913);+#912 = CARTESIAN_POINT('',(0.,0.15));+#913 = VECTOR('',#914,1.);+#914 = DIRECTION('',(1.,0.));+#915 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#916 = ORIENTED_EDGE('',*,*,#917,.T.);+#917 = EDGE_CURVE('',#890,#918,#920,.T.);+#918 = VERTEX_POINT('',#919);+#919 = CARTESIAN_POINT('',(-2.15,3.075,0.445));+#920 = SURFACE_CURVE('',#921,(#925,#932),.PCURVE_S1.);+#921 = LINE('',#922,#923);+#922 = CARTESIAN_POINT('',(-2.2,3.075,0.445));+#923 = VECTOR('',#924,1.);+#924 = DIRECTION('',(1.,0.,0.));+#925 = PCURVE('',#766,#926);+#926 = DEFINITIONAL_REPRESENTATION('',(#927),#931);+#927 = LINE('',#928,#929);+#928 = CARTESIAN_POINT('',(-0.227057976796,0.434182274245));+#929 = VECTOR('',#930,1.);+#930 = DIRECTION('',(0.,1.));+#931 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#932 = PCURVE('',#933,#938);+#933 = PLANE('',#934);+#934 = AXIS2_PLACEMENT_3D('',#935,#936,#937);+#935 = CARTESIAN_POINT('',(-2.2,2.925,0.445));+#936 = DIRECTION('',(0.,0.,1.));+#937 = DIRECTION('',(1.,0.,0.));+#938 = DEFINITIONAL_REPRESENTATION('',(#939),#943);+#939 = LINE('',#940,#941);+#940 = CARTESIAN_POINT('',(0.,0.15));+#941 = VECTOR('',#942,1.);+#942 = DIRECTION('',(1.,0.));+#943 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#944 = ORIENTED_EDGE('',*,*,#945,.T.);+#945 = EDGE_CURVE('',#918,#664,#946,.T.);+#946 = SURFACE_CURVE('',#947,(#951,#958),.PCURVE_S1.);+#947 = LINE('',#948,#949);+#948 = CARTESIAN_POINT('',(-2.15,3.075,0.445));+#949 = VECTOR('',#950,1.);+#950 = DIRECTION('',(0.,0.,1.));+#951 = PCURVE('',#766,#952);+#952 = DEFINITIONAL_REPRESENTATION('',(#953),#957);+#953 = LINE('',#954,#955);+#954 = CARTESIAN_POINT('',(-0.227057976796,0.484182274245));+#955 = VECTOR('',#956,1.);+#956 = DIRECTION('',(-1.,0.));+#957 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#958 = PCURVE('',#684,#959);+#959 = DEFINITIONAL_REPRESENTATION('',(#960),#964);+#960 = LINE('',#961,#962);+#961 = CARTESIAN_POINT('',(0.,0.15));+#962 = VECTOR('',#963,1.);+#963 = DIRECTION('',(1.,0.));+#964 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#965 = ADVANCED_FACE('',(#966),#933,.F.);+#966 = FACE_BOUND('',#967,.F.);+#967 = EDGE_LOOP('',(#968,#991,#1014,#1035));+#968 = ORIENTED_EDGE('',*,*,#969,.F.);+#969 = EDGE_CURVE('',#970,#890,#972,.T.);+#970 = VERTEX_POINT('',#971);+#971 = CARTESIAN_POINT('',(-2.2,2.775,0.445));+#972 = SURFACE_CURVE('',#973,(#977,#984),.PCURVE_S1.);+#973 = LINE('',#974,#975);+#974 = CARTESIAN_POINT('',(-2.2,2.775,0.445));+#975 = VECTOR('',#976,1.);+#976 = DIRECTION('',(0.,1.,0.));+#977 = PCURVE('',#933,#978);+#978 = DEFINITIONAL_REPRESENTATION('',(#979),#983);+#979 = LINE('',#980,#981);+#980 = CARTESIAN_POINT('',(0.,-0.15));+#981 = VECTOR('',#982,1.);+#982 = DIRECTION('',(0.,1.));+#983 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#984 = PCURVE('',#905,#985);+#985 = DEFINITIONAL_REPRESENTATION('',(#986),#990);+#986 = LINE('',#987,#988);+#987 = CARTESIAN_POINT('',(0.529793591883,-0.15));+#988 = VECTOR('',#989,1.);+#989 = DIRECTION('',(0.,1.));+#990 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#991 = ORIENTED_EDGE('',*,*,#992,.T.);+#992 = EDGE_CURVE('',#970,#993,#995,.T.);+#993 = VERTEX_POINT('',#994);+#994 = CARTESIAN_POINT('',(-2.15,2.775,0.445));+#995 = SURFACE_CURVE('',#996,(#1000,#1007),.PCURVE_S1.);+#996 = LINE('',#997,#998);+#997 = CARTESIAN_POINT('',(-2.2,2.775,0.445));+#998 = VECTOR('',#999,1.);+#999 = DIRECTION('',(1.,0.,0.));+#1000 = PCURVE('',#933,#1001);+#1001 = DEFINITIONAL_REPRESENTATION('',(#1002),#1006);+#1002 = LINE('',#1003,#1004);+#1003 = CARTESIAN_POINT('',(0.,-0.15));+#1004 = VECTOR('',#1005,1.);+#1005 = DIRECTION('',(1.,0.));+#1006 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1007 = PCURVE('',#712,#1008);+#1008 = DEFINITIONAL_REPRESENTATION('',(#1009),#1013);+#1009 = LINE('',#1010,#1011);+#1010 = CARTESIAN_POINT('',(-0.227057976796,0.434182274245));+#1011 = VECTOR('',#1012,1.);+#1012 = DIRECTION('',(0.,1.));+#1013 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1014 = ORIENTED_EDGE('',*,*,#1015,.T.);+#1015 = EDGE_CURVE('',#993,#918,#1016,.T.);+#1016 = SURFACE_CURVE('',#1017,(#1021,#1028),.PCURVE_S1.);+#1017 = LINE('',#1018,#1019);+#1018 = CARTESIAN_POINT('',(-2.15,2.775,0.445));+#1019 = VECTOR('',#1020,1.);+#1020 = DIRECTION('',(0.,1.,0.));+#1021 = PCURVE('',#933,#1022);+#1022 = DEFINITIONAL_REPRESENTATION('',(#1023),#1027);+#1023 = LINE('',#1024,#1025);+#1024 = CARTESIAN_POINT('',(5.E-02,-0.15));+#1025 = VECTOR('',#1026,1.);+#1026 = DIRECTION('',(0.,1.));+#1027 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1028 = PCURVE('',#684,#1029);+#1029 = DEFINITIONAL_REPRESENTATION('',(#1030),#1034);+#1030 = LINE('',#1031,#1032);+#1031 = CARTESIAN_POINT('',(0.,-0.15));+#1032 = VECTOR('',#1033,1.);+#1033 = DIRECTION('',(0.,1.));+#1034 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1035 = ORIENTED_EDGE('',*,*,#917,.F.);+#1036 = ADVANCED_FACE('',(#1037),#905,.F.);+#1037 = FACE_BOUND('',#1038,.F.);+#1038 = EDGE_LOOP('',(#1039,#1062,#1063,#1064));+#1039 = ORIENTED_EDGE('',*,*,#1040,.T.);+#1040 = EDGE_CURVE('',#1041,#970,#1043,.T.);+#1041 = VERTEX_POINT('',#1042);+#1042 = CARTESIAN_POINT('',(-2.4875,2.775,0.));+#1043 = SURFACE_CURVE('',#1044,(#1048,#1055),.PCURVE_S1.);+#1044 = LINE('',#1045,#1046);+#1045 = CARTESIAN_POINT('',(-2.4875,2.775,0.));+#1046 = VECTOR('',#1047,1.);+#1047 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#1048 = PCURVE('',#905,#1049);+#1049 = DEFINITIONAL_REPRESENTATION('',(#1050),#1054);+#1050 = LINE('',#1051,#1052);+#1051 = CARTESIAN_POINT('',(0.,-0.15));+#1052 = VECTOR('',#1053,1.);+#1053 = DIRECTION('',(1.,0.));+#1054 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1055 = PCURVE('',#712,#1056);+#1056 = DEFINITIONAL_REPRESENTATION('',(#1057),#1061);+#1057 = LINE('',#1058,#1059);+#1058 = CARTESIAN_POINT('',(0.217942023204,0.146682274245));+#1059 = VECTOR('',#1060,1.);+#1060 = DIRECTION('',(-0.839949759337,0.542664170358));+#1061 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1062 = ORIENTED_EDGE('',*,*,#969,.T.);+#1063 = ORIENTED_EDGE('',*,*,#889,.F.);+#1064 = ORIENTED_EDGE('',*,*,#1065,.T.);+#1065 = EDGE_CURVE('',#862,#1041,#1066,.T.);+#1066 = SURFACE_CURVE('',#1067,(#1071,#1078),.PCURVE_S1.);+#1067 = LINE('',#1068,#1069);+#1068 = CARTESIAN_POINT('',(-2.4875,3.075,0.));+#1069 = VECTOR('',#1070,1.);+#1070 = DIRECTION('',(0.,-1.,0.));+#1071 = PCURVE('',#905,#1072);+#1072 = DEFINITIONAL_REPRESENTATION('',(#1073),#1077);+#1073 = LINE('',#1074,#1075);+#1074 = CARTESIAN_POINT('',(0.,0.15));+#1075 = VECTOR('',#1076,1.);+#1076 = DIRECTION('',(0.,-1.));+#1077 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1078 = PCURVE('',#877,#1079);+#1079 = DEFINITIONAL_REPRESENTATION('',(#1080),#1084);+#1080 = LINE('',#1081,#1082);+#1081 = CARTESIAN_POINT('',(0.7175,0.15));+#1082 = VECTOR('',#1083,1.);+#1083 = DIRECTION('',(0.,-1.));+#1084 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1085 = ADVANCED_FACE('',(#1086),#877,.F.);+#1086 = FACE_BOUND('',#1087,.F.);+#1087 = EDGE_LOOP('',(#1088,#1111,#1112,#1113));+#1088 = ORIENTED_EDGE('',*,*,#1089,.T.);+#1089 = EDGE_CURVE('',#1090,#1041,#1092,.T.);+#1090 = VERTEX_POINT('',#1091);+#1091 = CARTESIAN_POINT('',(-3.205,2.775,0.));+#1092 = SURFACE_CURVE('',#1093,(#1097,#1104),.PCURVE_S1.);+#1093 = LINE('',#1094,#1095);+#1094 = CARTESIAN_POINT('',(-3.205,2.775,0.));+#1095 = VECTOR('',#1096,1.);+#1096 = DIRECTION('',(1.,0.,0.));+#1097 = PCURVE('',#877,#1098);+#1098 = DEFINITIONAL_REPRESENTATION('',(#1099),#1103);+#1099 = LINE('',#1100,#1101);+#1100 = CARTESIAN_POINT('',(0.,-0.15));+#1101 = VECTOR('',#1102,1.);+#1102 = DIRECTION('',(1.,0.));+#1103 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1104 = PCURVE('',#712,#1105);+#1105 = DEFINITIONAL_REPRESENTATION('',(#1106),#1110);+#1106 = LINE('',#1107,#1108);+#1107 = CARTESIAN_POINT('',(0.217942023204,-0.570817725755));+#1108 = VECTOR('',#1109,1.);+#1109 = DIRECTION('',(0.,1.));+#1110 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1111 = ORIENTED_EDGE('',*,*,#1065,.F.);+#1112 = ORIENTED_EDGE('',*,*,#861,.F.);+#1113 = ORIENTED_EDGE('',*,*,#1114,.T.);+#1114 = EDGE_CURVE('',#834,#1090,#1115,.T.);+#1115 = SURFACE_CURVE('',#1116,(#1120,#1127),.PCURVE_S1.);+#1116 = LINE('',#1117,#1118);+#1117 = CARTESIAN_POINT('',(-3.205,3.075,0.));+#1118 = VECTOR('',#1119,1.);+#1119 = DIRECTION('',(0.,-1.,0.));+#1120 = PCURVE('',#877,#1121);+#1121 = DEFINITIONAL_REPRESENTATION('',(#1122),#1126);+#1122 = LINE('',#1123,#1124);+#1123 = CARTESIAN_POINT('',(0.,0.15));+#1124 = VECTOR('',#1125,1.);+#1125 = DIRECTION('',(0.,-1.));+#1126 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1127 = PCURVE('',#849,#1128);+#1128 = DEFINITIONAL_REPRESENTATION('',(#1129),#1133);+#1129 = LINE('',#1130,#1131);+#1130 = CARTESIAN_POINT('',(0.15,0.15));+#1131 = VECTOR('',#1132,1.);+#1132 = DIRECTION('',(0.,-1.));+#1133 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1134 = ADVANCED_FACE('',(#1135),#849,.F.);+#1135 = FACE_BOUND('',#1136,.F.);+#1136 = EDGE_LOOP('',(#1137,#1160,#1161,#1162));+#1137 = ORIENTED_EDGE('',*,*,#1138,.T.);+#1138 = EDGE_CURVE('',#1139,#1090,#1141,.T.);+#1139 = VERTEX_POINT('',#1140);+#1140 = CARTESIAN_POINT('',(-3.205,2.775,0.15));+#1141 = SURFACE_CURVE('',#1142,(#1146,#1153),.PCURVE_S1.);+#1142 = LINE('',#1143,#1144);+#1143 = CARTESIAN_POINT('',(-3.205,2.775,0.15));+#1144 = VECTOR('',#1145,1.);+#1145 = DIRECTION('',(0.,0.,-1.));+#1146 = PCURVE('',#849,#1147);+#1147 = DEFINITIONAL_REPRESENTATION('',(#1148),#1152);+#1148 = LINE('',#1149,#1150);+#1149 = CARTESIAN_POINT('',(0.,-0.15));+#1150 = VECTOR('',#1151,1.);+#1151 = DIRECTION('',(1.,0.));+#1152 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1153 = PCURVE('',#712,#1154);+#1154 = DEFINITIONAL_REPRESENTATION('',(#1155),#1159);+#1155 = LINE('',#1156,#1157);+#1156 = CARTESIAN_POINT('',(6.7942023204E-02,-0.570817725755));+#1157 = VECTOR('',#1158,1.);+#1158 = DIRECTION('',(1.,0.));+#1159 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1160 = ORIENTED_EDGE('',*,*,#1114,.F.);+#1161 = ORIENTED_EDGE('',*,*,#833,.F.);+#1162 = ORIENTED_EDGE('',*,*,#1163,.T.);+#1163 = EDGE_CURVE('',#806,#1139,#1164,.T.);+#1164 = SURFACE_CURVE('',#1165,(#1169,#1176),.PCURVE_S1.);+#1165 = LINE('',#1166,#1167);+#1166 = CARTESIAN_POINT('',(-3.205,3.075,0.15));+#1167 = VECTOR('',#1168,1.);+#1168 = DIRECTION('',(0.,-1.,0.));+#1169 = PCURVE('',#849,#1170);+#1170 = DEFINITIONAL_REPRESENTATION('',(#1171),#1175);+#1171 = LINE('',#1172,#1173);+#1172 = CARTESIAN_POINT('',(0.,0.15));+#1173 = VECTOR('',#1174,1.);+#1174 = DIRECTION('',(0.,-1.));+#1175 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1176 = PCURVE('',#821,#1177);+#1177 = DEFINITIONAL_REPRESENTATION('',(#1178),#1182);+#1178 = LINE('',#1179,#1180);+#1179 = CARTESIAN_POINT('',(0.5675,0.15));+#1180 = VECTOR('',#1181,1.);+#1181 = DIRECTION('',(0.,-1.));+#1182 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1183 = ADVANCED_FACE('',(#1184),#821,.F.);+#1184 = FACE_BOUND('',#1185,.F.);+#1185 = EDGE_LOOP('',(#1186,#1209,#1210,#1211));+#1186 = ORIENTED_EDGE('',*,*,#1187,.T.);+#1187 = EDGE_CURVE('',#1188,#1139,#1190,.T.);+#1188 = VERTEX_POINT('',#1189);+#1189 = CARTESIAN_POINT('',(-2.6375,2.775,0.15));+#1190 = SURFACE_CURVE('',#1191,(#1195,#1202),.PCURVE_S1.);+#1191 = LINE('',#1192,#1193);+#1192 = CARTESIAN_POINT('',(-2.6375,2.775,0.15));+#1193 = VECTOR('',#1194,1.);+#1194 = DIRECTION('',(-1.,0.,0.));+#1195 = PCURVE('',#821,#1196);+#1196 = DEFINITIONAL_REPRESENTATION('',(#1197),#1201);+#1197 = LINE('',#1198,#1199);+#1198 = CARTESIAN_POINT('',(0.,-0.15));+#1199 = VECTOR('',#1200,1.);+#1200 = DIRECTION('',(1.,0.));+#1201 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1202 = PCURVE('',#712,#1203);+#1203 = DEFINITIONAL_REPRESENTATION('',(#1204),#1208);+#1204 = LINE('',#1205,#1206);+#1205 = CARTESIAN_POINT('',(6.7942023204E-02,-3.317725755E-03));+#1206 = VECTOR('',#1207,1.);+#1207 = DIRECTION('',(0.,-1.));+#1208 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1209 = ORIENTED_EDGE('',*,*,#1163,.F.);+#1210 = ORIENTED_EDGE('',*,*,#805,.F.);+#1211 = ORIENTED_EDGE('',*,*,#1212,.T.);+#1212 = EDGE_CURVE('',#783,#1188,#1213,.T.);+#1213 = SURFACE_CURVE('',#1214,(#1218,#1225),.PCURVE_S1.);+#1214 = LINE('',#1215,#1216);+#1215 = CARTESIAN_POINT('',(-2.6375,3.075,0.15));+#1216 = VECTOR('',#1217,1.);+#1217 = DIRECTION('',(0.,-1.,0.));+#1218 = PCURVE('',#821,#1219);+#1219 = DEFINITIONAL_REPRESENTATION('',(#1220),#1224);+#1220 = LINE('',#1221,#1222);+#1221 = CARTESIAN_POINT('',(0.,0.15));+#1222 = VECTOR('',#1223,1.);+#1223 = DIRECTION('',(0.,-1.));+#1224 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1225 = PCURVE('',#740,#1226);+#1226 = DEFINITIONAL_REPRESENTATION('',(#1227),#1231);+#1227 = LINE('',#1228,#1229);+#1228 = CARTESIAN_POINT('',(0.529793591883,0.15));+#1229 = VECTOR('',#1230,1.);+#1230 = DIRECTION('',(-0.,-1.));+#1231 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1232 = ADVANCED_FACE('',(#1233),#740,.F.);+#1233 = FACE_BOUND('',#1234,.F.);+#1234 = EDGE_LOOP('',(#1235,#1256,#1257,#1258));+#1235 = ORIENTED_EDGE('',*,*,#1236,.T.);+#1236 = EDGE_CURVE('',#697,#1188,#1237,.T.);+#1237 = SURFACE_CURVE('',#1238,(#1242,#1249),.PCURVE_S1.);+#1238 = LINE('',#1239,#1240);+#1239 = CARTESIAN_POINT('',(-2.35,2.775,0.595));+#1240 = VECTOR('',#1241,1.);+#1241 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#1242 = PCURVE('',#740,#1243);+#1243 = DEFINITIONAL_REPRESENTATION('',(#1244),#1248);+#1244 = LINE('',#1245,#1246);+#1245 = CARTESIAN_POINT('',(-0.,-0.15));+#1246 = VECTOR('',#1247,1.);+#1247 = DIRECTION('',(1.,0.));+#1248 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1249 = PCURVE('',#712,#1250);+#1250 = DEFINITIONAL_REPRESENTATION('',(#1251),#1255);+#1251 = LINE('',#1252,#1253);+#1252 = CARTESIAN_POINT('',(-0.377057976796,0.284182274245));+#1253 = VECTOR('',#1254,1.);+#1254 = DIRECTION('',(0.839949759337,-0.542664170358));+#1255 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1256 = ORIENTED_EDGE('',*,*,#1212,.F.);+#1257 = ORIENTED_EDGE('',*,*,#782,.F.);+#1258 = ORIENTED_EDGE('',*,*,#724,.T.);+#1259 = ADVANCED_FACE('',(#1260),#712,.T.);+#1260 = FACE_BOUND('',#1261,.T.);+#1261 = EDGE_LOOP('',(#1262,#1263,#1264,#1265,#1266,#1267,#1268,#1269));+#1262 = ORIENTED_EDGE('',*,*,#696,.T.);+#1263 = ORIENTED_EDGE('',*,*,#1236,.T.);+#1264 = ORIENTED_EDGE('',*,*,#1187,.T.);+#1265 = ORIENTED_EDGE('',*,*,#1138,.T.);+#1266 = ORIENTED_EDGE('',*,*,#1089,.T.);+#1267 = ORIENTED_EDGE('',*,*,#1040,.T.);+#1268 = ORIENTED_EDGE('',*,*,#992,.T.);+#1269 = ORIENTED_EDGE('',*,*,#1270,.T.);+#1270 = EDGE_CURVE('',#993,#662,#1271,.T.);+#1271 = SURFACE_CURVE('',#1272,(#1276,#1283),.PCURVE_S1.);+#1272 = LINE('',#1273,#1274);+#1273 = CARTESIAN_POINT('',(-2.15,2.775,0.445));+#1274 = VECTOR('',#1275,1.);+#1275 = DIRECTION('',(0.,0.,1.));+#1276 = PCURVE('',#712,#1277);+#1277 = DEFINITIONAL_REPRESENTATION('',(#1278),#1282);+#1278 = LINE('',#1279,#1280);+#1279 = CARTESIAN_POINT('',(-0.227057976796,0.484182274245));+#1280 = VECTOR('',#1281,1.);+#1281 = DIRECTION('',(-1.,0.));+#1282 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1283 = PCURVE('',#684,#1284);+#1284 = DEFINITIONAL_REPRESENTATION('',(#1285),#1289);+#1285 = LINE('',#1286,#1287);+#1286 = CARTESIAN_POINT('',(0.,-0.15));+#1287 = VECTOR('',#1288,1.);+#1288 = DIRECTION('',(1.,0.));+#1289 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1290 = ADVANCED_FACE('',(#1291),#684,.F.);+#1291 = FACE_BOUND('',#1292,.F.);+#1292 = EDGE_LOOP('',(#1293,#1294,#1295,#1296));+#1293 = ORIENTED_EDGE('',*,*,#1015,.F.);+#1294 = ORIENTED_EDGE('',*,*,#1270,.T.);+#1295 = ORIENTED_EDGE('',*,*,#661,.T.);+#1296 = ORIENTED_EDGE('',*,*,#945,.F.);+#1297 = MANIFOLD_SOLID_BREP('',#1298);+#1298 = CLOSED_SHELL('',(#1299,#1419,#1607,#1678,#1727,#1776,#1825,#1874+ ,#1901,#1932));+#1299 = ADVANCED_FACE('',(#1300),#1314,.F.);+#1300 = FACE_BOUND('',#1301,.F.);+#1301 = EDGE_LOOP('',(#1302,#1337,#1365,#1393));+#1302 = ORIENTED_EDGE('',*,*,#1303,.F.);+#1303 = EDGE_CURVE('',#1304,#1306,#1308,.T.);+#1304 = VERTEX_POINT('',#1305);+#1305 = CARTESIAN_POINT('',(-2.15,2.125,0.595));+#1306 = VERTEX_POINT('',#1307);+#1307 = CARTESIAN_POINT('',(-2.15,2.425,0.595));+#1308 = SURFACE_CURVE('',#1309,(#1313,#1325),.PCURVE_S1.);+#1309 = LINE('',#1310,#1311);+#1310 = CARTESIAN_POINT('',(-2.15,2.125,0.595));+#1311 = VECTOR('',#1312,1.);+#1312 = DIRECTION('',(0.,1.,0.));+#1313 = PCURVE('',#1314,#1319);+#1314 = PLANE('',#1315);+#1315 = AXIS2_PLACEMENT_3D('',#1316,#1317,#1318);+#1316 = CARTESIAN_POINT('',(-2.15,2.275,0.595));+#1317 = DIRECTION('',(-0.,-0.,-1.));+#1318 = DIRECTION('',(-1.,0.,0.));+#1319 = DEFINITIONAL_REPRESENTATION('',(#1320),#1324);+#1320 = LINE('',#1321,#1322);+#1321 = CARTESIAN_POINT('',(0.,-0.15));+#1322 = VECTOR('',#1323,1.);+#1323 = DIRECTION('',(0.,1.));+#1324 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1325 = PCURVE('',#1326,#1331);+#1326 = PLANE('',#1327);+#1327 = AXIS2_PLACEMENT_3D('',#1328,#1329,#1330);+#1328 = CARTESIAN_POINT('',(-2.15,2.275,0.445));+#1329 = DIRECTION('',(-1.,0.,0.));+#1330 = DIRECTION('',(0.,0.,1.));+#1331 = DEFINITIONAL_REPRESENTATION('',(#1332),#1336);+#1332 = LINE('',#1333,#1334);+#1333 = CARTESIAN_POINT('',(0.15,-0.15));+#1334 = VECTOR('',#1335,1.);+#1335 = DIRECTION('',(0.,1.));+#1336 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1337 = ORIENTED_EDGE('',*,*,#1338,.T.);+#1338 = EDGE_CURVE('',#1304,#1339,#1341,.T.);+#1339 = VERTEX_POINT('',#1340);+#1340 = CARTESIAN_POINT('',(-2.35,2.125,0.595));+#1341 = SURFACE_CURVE('',#1342,(#1346,#1353),.PCURVE_S1.);+#1342 = LINE('',#1343,#1344);+#1343 = CARTESIAN_POINT('',(-2.15,2.125,0.595));+#1344 = VECTOR('',#1345,1.);+#1345 = DIRECTION('',(-1.,0.,0.));+#1346 = PCURVE('',#1314,#1347);+#1347 = DEFINITIONAL_REPRESENTATION('',(#1348),#1352);+#1348 = LINE('',#1349,#1350);+#1349 = CARTESIAN_POINT('',(0.,-0.15));+#1350 = VECTOR('',#1351,1.);+#1351 = DIRECTION('',(1.,0.));+#1352 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1353 = PCURVE('',#1354,#1359);+#1354 = PLANE('',#1355);+#1355 = AXIS2_PLACEMENT_3D('',#1356,#1357,#1358);+#1356 = CARTESIAN_POINT('',(-2.634182274245,2.125,0.217942023204));+#1357 = DIRECTION('',(-0.,-1.,-0.));+#1358 = DIRECTION('',(0.,0.,-1.));+#1359 = DEFINITIONAL_REPRESENTATION('',(#1360),#1364);+#1360 = LINE('',#1361,#1362);+#1361 = CARTESIAN_POINT('',(-0.377057976796,0.484182274245));+#1362 = VECTOR('',#1363,1.);+#1363 = DIRECTION('',(0.,-1.));+#1364 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1365 = ORIENTED_EDGE('',*,*,#1366,.F.);+#1366 = EDGE_CURVE('',#1367,#1339,#1369,.T.);+#1367 = VERTEX_POINT('',#1368);+#1368 = CARTESIAN_POINT('',(-2.35,2.425,0.595));+#1369 = SURFACE_CURVE('',#1370,(#1374,#1381),.PCURVE_S1.);+#1370 = LINE('',#1371,#1372);+#1371 = CARTESIAN_POINT('',(-2.35,2.425,0.595));+#1372 = VECTOR('',#1373,1.);+#1373 = DIRECTION('',(0.,-1.,0.));+#1374 = PCURVE('',#1314,#1375);+#1375 = DEFINITIONAL_REPRESENTATION('',(#1376),#1380);+#1376 = LINE('',#1377,#1378);+#1377 = CARTESIAN_POINT('',(0.2,0.15));+#1378 = VECTOR('',#1379,1.);+#1379 = DIRECTION('',(0.,-1.));+#1380 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1381 = PCURVE('',#1382,#1387);+#1382 = PLANE('',#1383);+#1383 = AXIS2_PLACEMENT_3D('',#1384,#1385,#1386);+#1384 = CARTESIAN_POINT('',(-2.35,2.275,0.595));+#1385 = DIRECTION('',(0.839949759337,0.,-0.542664170358));+#1386 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#1387 = DEFINITIONAL_REPRESENTATION('',(#1388),#1392);+#1388 = LINE('',#1389,#1390);+#1389 = CARTESIAN_POINT('',(0.,0.15));+#1390 = VECTOR('',#1391,1.);+#1391 = DIRECTION('',(-0.,-1.));+#1392 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1393 = ORIENTED_EDGE('',*,*,#1394,.F.);+#1394 = EDGE_CURVE('',#1306,#1367,#1395,.T.);+#1395 = SURFACE_CURVE('',#1396,(#1400,#1407),.PCURVE_S1.);+#1396 = LINE('',#1397,#1398);+#1397 = CARTESIAN_POINT('',(-2.15,2.425,0.595));+#1398 = VECTOR('',#1399,1.);+#1399 = DIRECTION('',(-1.,0.,0.));+#1400 = PCURVE('',#1314,#1401);+#1401 = DEFINITIONAL_REPRESENTATION('',(#1402),#1406);+#1402 = LINE('',#1403,#1404);+#1403 = CARTESIAN_POINT('',(0.,0.15));+#1404 = VECTOR('',#1405,1.);+#1405 = DIRECTION('',(1.,0.));+#1406 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1407 = PCURVE('',#1408,#1413);+#1408 = PLANE('',#1409);+#1409 = AXIS2_PLACEMENT_3D('',#1410,#1411,#1412);+#1410 = CARTESIAN_POINT('',(-2.634182274245,2.425,0.217942023204));+#1411 = DIRECTION('',(-0.,-1.,-0.));+#1412 = DIRECTION('',(0.,0.,-1.));+#1413 = DEFINITIONAL_REPRESENTATION('',(#1414),#1418);+#1414 = LINE('',#1415,#1416);+#1415 = CARTESIAN_POINT('',(-0.377057976796,0.484182274245));+#1416 = VECTOR('',#1417,1.);+#1417 = DIRECTION('',(0.,-1.));+#1418 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1419 = ADVANCED_FACE('',(#1420),#1408,.F.);+#1420 = FACE_BOUND('',#1421,.F.);+#1421 = EDGE_LOOP('',(#1422,#1423,#1446,#1474,#1502,#1530,#1558,#1586));+#1422 = ORIENTED_EDGE('',*,*,#1394,.T.);+#1423 = ORIENTED_EDGE('',*,*,#1424,.T.);+#1424 = EDGE_CURVE('',#1367,#1425,#1427,.T.);+#1425 = VERTEX_POINT('',#1426);+#1426 = CARTESIAN_POINT('',(-2.6375,2.425,0.15));+#1427 = SURFACE_CURVE('',#1428,(#1432,#1439),.PCURVE_S1.);+#1428 = LINE('',#1429,#1430);+#1429 = CARTESIAN_POINT('',(-2.35,2.425,0.595));+#1430 = VECTOR('',#1431,1.);+#1431 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#1432 = PCURVE('',#1408,#1433);+#1433 = DEFINITIONAL_REPRESENTATION('',(#1434),#1438);+#1434 = LINE('',#1435,#1436);+#1435 = CARTESIAN_POINT('',(-0.377057976796,0.284182274245));+#1436 = VECTOR('',#1437,1.);+#1437 = DIRECTION('',(0.839949759337,-0.542664170358));+#1438 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1439 = PCURVE('',#1382,#1440);+#1440 = DEFINITIONAL_REPRESENTATION('',(#1441),#1445);+#1441 = LINE('',#1442,#1443);+#1442 = CARTESIAN_POINT('',(0.,0.15));+#1443 = VECTOR('',#1444,1.);+#1444 = DIRECTION('',(1.,0.));+#1445 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1446 = ORIENTED_EDGE('',*,*,#1447,.T.);+#1447 = EDGE_CURVE('',#1425,#1448,#1450,.T.);+#1448 = VERTEX_POINT('',#1449);+#1449 = CARTESIAN_POINT('',(-3.205,2.425,0.15));+#1450 = SURFACE_CURVE('',#1451,(#1455,#1462),.PCURVE_S1.);+#1451 = LINE('',#1452,#1453);+#1452 = CARTESIAN_POINT('',(-2.6375,2.425,0.15));+#1453 = VECTOR('',#1454,1.);+#1454 = DIRECTION('',(-1.,0.,0.));+#1455 = PCURVE('',#1408,#1456);+#1456 = DEFINITIONAL_REPRESENTATION('',(#1457),#1461);+#1457 = LINE('',#1458,#1459);+#1458 = CARTESIAN_POINT('',(6.7942023204E-02,-3.317725755E-03));+#1459 = VECTOR('',#1460,1.);+#1460 = DIRECTION('',(0.,-1.));+#1461 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1462 = PCURVE('',#1463,#1468);+#1463 = PLANE('',#1464);+#1464 = AXIS2_PLACEMENT_3D('',#1465,#1466,#1467);+#1465 = CARTESIAN_POINT('',(-2.6375,2.275,0.15));+#1466 = DIRECTION('',(-0.,-0.,-1.));+#1467 = DIRECTION('',(-1.,0.,0.));+#1468 = DEFINITIONAL_REPRESENTATION('',(#1469),#1473);+#1469 = LINE('',#1470,#1471);+#1470 = CARTESIAN_POINT('',(0.,0.15));+#1471 = VECTOR('',#1472,1.);+#1472 = DIRECTION('',(1.,0.));+#1473 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1474 = ORIENTED_EDGE('',*,*,#1475,.T.);+#1475 = EDGE_CURVE('',#1448,#1476,#1478,.T.);+#1476 = VERTEX_POINT('',#1477);+#1477 = CARTESIAN_POINT('',(-3.205,2.425,0.));+#1478 = SURFACE_CURVE('',#1479,(#1483,#1490),.PCURVE_S1.);+#1479 = LINE('',#1480,#1481);+#1480 = CARTESIAN_POINT('',(-3.205,2.425,0.15));+#1481 = VECTOR('',#1482,1.);+#1482 = DIRECTION('',(0.,0.,-1.));+#1483 = PCURVE('',#1408,#1484);+#1484 = DEFINITIONAL_REPRESENTATION('',(#1485),#1489);+#1485 = LINE('',#1486,#1487);+#1486 = CARTESIAN_POINT('',(6.7942023204E-02,-0.570817725755));+#1487 = VECTOR('',#1488,1.);+#1488 = DIRECTION('',(1.,0.));+#1489 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1490 = PCURVE('',#1491,#1496);+#1491 = PLANE('',#1492);+#1492 = AXIS2_PLACEMENT_3D('',#1493,#1494,#1495);+#1493 = CARTESIAN_POINT('',(-3.205,2.275,0.15));+#1494 = DIRECTION('',(1.,0.,0.));+#1495 = DIRECTION('',(0.,0.,-1.));+#1496 = DEFINITIONAL_REPRESENTATION('',(#1497),#1501);+#1497 = LINE('',#1498,#1499);+#1498 = CARTESIAN_POINT('',(0.,0.15));+#1499 = VECTOR('',#1500,1.);+#1500 = DIRECTION('',(1.,0.));+#1501 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1502 = ORIENTED_EDGE('',*,*,#1503,.T.);+#1503 = EDGE_CURVE('',#1476,#1504,#1506,.T.);+#1504 = VERTEX_POINT('',#1505);+#1505 = CARTESIAN_POINT('',(-2.4875,2.425,0.));+#1506 = SURFACE_CURVE('',#1507,(#1511,#1518),.PCURVE_S1.);+#1507 = LINE('',#1508,#1509);+#1508 = CARTESIAN_POINT('',(-3.205,2.425,0.));+#1509 = VECTOR('',#1510,1.);+#1510 = DIRECTION('',(1.,0.,0.));+#1511 = PCURVE('',#1408,#1512);+#1512 = DEFINITIONAL_REPRESENTATION('',(#1513),#1517);+#1513 = LINE('',#1514,#1515);+#1514 = CARTESIAN_POINT('',(0.217942023204,-0.570817725755));+#1515 = VECTOR('',#1516,1.);+#1516 = DIRECTION('',(0.,1.));+#1517 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1518 = PCURVE('',#1519,#1524);+#1519 = PLANE('',#1520);+#1520 = AXIS2_PLACEMENT_3D('',#1521,#1522,#1523);+#1521 = CARTESIAN_POINT('',(-3.205,2.275,0.));+#1522 = DIRECTION('',(0.,0.,1.));+#1523 = DIRECTION('',(1.,0.,0.));+#1524 = DEFINITIONAL_REPRESENTATION('',(#1525),#1529);+#1525 = LINE('',#1526,#1527);+#1526 = CARTESIAN_POINT('',(0.,0.15));+#1527 = VECTOR('',#1528,1.);+#1528 = DIRECTION('',(1.,0.));+#1529 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1530 = ORIENTED_EDGE('',*,*,#1531,.T.);+#1531 = EDGE_CURVE('',#1504,#1532,#1534,.T.);+#1532 = VERTEX_POINT('',#1533);+#1533 = CARTESIAN_POINT('',(-2.2,2.425,0.445));+#1534 = SURFACE_CURVE('',#1535,(#1539,#1546),.PCURVE_S1.);+#1535 = LINE('',#1536,#1537);+#1536 = CARTESIAN_POINT('',(-2.4875,2.425,0.));+#1537 = VECTOR('',#1538,1.);+#1538 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#1539 = PCURVE('',#1408,#1540);+#1540 = DEFINITIONAL_REPRESENTATION('',(#1541),#1545);+#1541 = LINE('',#1542,#1543);+#1542 = CARTESIAN_POINT('',(0.217942023204,0.146682274245));+#1543 = VECTOR('',#1544,1.);+#1544 = DIRECTION('',(-0.839949759337,0.542664170358));+#1545 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1546 = PCURVE('',#1547,#1552);+#1547 = PLANE('',#1548);+#1548 = AXIS2_PLACEMENT_3D('',#1549,#1550,#1551);+#1549 = CARTESIAN_POINT('',(-2.4875,2.275,0.));+#1550 = DIRECTION('',(-0.839949759337,0.,0.542664170358));+#1551 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#1552 = DEFINITIONAL_REPRESENTATION('',(#1553),#1557);+#1553 = LINE('',#1554,#1555);+#1554 = CARTESIAN_POINT('',(0.,0.15));+#1555 = VECTOR('',#1556,1.);+#1556 = DIRECTION('',(1.,0.));+#1557 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1558 = ORIENTED_EDGE('',*,*,#1559,.T.);+#1559 = EDGE_CURVE('',#1532,#1560,#1562,.T.);+#1560 = VERTEX_POINT('',#1561);+#1561 = CARTESIAN_POINT('',(-2.15,2.425,0.445));+#1562 = SURFACE_CURVE('',#1563,(#1567,#1574),.PCURVE_S1.);+#1563 = LINE('',#1564,#1565);+#1564 = CARTESIAN_POINT('',(-2.2,2.425,0.445));+#1565 = VECTOR('',#1566,1.);+#1566 = DIRECTION('',(1.,0.,0.));+#1567 = PCURVE('',#1408,#1568);+#1568 = DEFINITIONAL_REPRESENTATION('',(#1569),#1573);+#1569 = LINE('',#1570,#1571);+#1570 = CARTESIAN_POINT('',(-0.227057976796,0.434182274245));+#1571 = VECTOR('',#1572,1.);+#1572 = DIRECTION('',(0.,1.));+#1573 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1574 = PCURVE('',#1575,#1580);+#1575 = PLANE('',#1576);+#1576 = AXIS2_PLACEMENT_3D('',#1577,#1578,#1579);+#1577 = CARTESIAN_POINT('',(-2.2,2.275,0.445));+#1578 = DIRECTION('',(0.,0.,1.));+#1579 = DIRECTION('',(1.,0.,0.));+#1580 = DEFINITIONAL_REPRESENTATION('',(#1581),#1585);+#1581 = LINE('',#1582,#1583);+#1582 = CARTESIAN_POINT('',(0.,0.15));+#1583 = VECTOR('',#1584,1.);+#1584 = DIRECTION('',(1.,0.));+#1585 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1586 = ORIENTED_EDGE('',*,*,#1587,.T.);+#1587 = EDGE_CURVE('',#1560,#1306,#1588,.T.);+#1588 = SURFACE_CURVE('',#1589,(#1593,#1600),.PCURVE_S1.);+#1589 = LINE('',#1590,#1591);+#1590 = CARTESIAN_POINT('',(-2.15,2.425,0.445));+#1591 = VECTOR('',#1592,1.);+#1592 = DIRECTION('',(0.,0.,1.));+#1593 = PCURVE('',#1408,#1594);+#1594 = DEFINITIONAL_REPRESENTATION('',(#1595),#1599);+#1595 = LINE('',#1596,#1597);+#1596 = CARTESIAN_POINT('',(-0.227057976796,0.484182274245));+#1597 = VECTOR('',#1598,1.);+#1598 = DIRECTION('',(-1.,0.));+#1599 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1600 = PCURVE('',#1326,#1601);+#1601 = DEFINITIONAL_REPRESENTATION('',(#1602),#1606);+#1602 = LINE('',#1603,#1604);+#1603 = CARTESIAN_POINT('',(0.,0.15));+#1604 = VECTOR('',#1605,1.);+#1605 = DIRECTION('',(1.,0.));+#1606 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1607 = ADVANCED_FACE('',(#1608),#1575,.F.);+#1608 = FACE_BOUND('',#1609,.F.);+#1609 = EDGE_LOOP('',(#1610,#1633,#1656,#1677));+#1610 = ORIENTED_EDGE('',*,*,#1611,.F.);+#1611 = EDGE_CURVE('',#1612,#1532,#1614,.T.);+#1612 = VERTEX_POINT('',#1613);+#1613 = CARTESIAN_POINT('',(-2.2,2.125,0.445));+#1614 = SURFACE_CURVE('',#1615,(#1619,#1626),.PCURVE_S1.);+#1615 = LINE('',#1616,#1617);+#1616 = CARTESIAN_POINT('',(-2.2,2.125,0.445));+#1617 = VECTOR('',#1618,1.);+#1618 = DIRECTION('',(0.,1.,0.));+#1619 = PCURVE('',#1575,#1620);+#1620 = DEFINITIONAL_REPRESENTATION('',(#1621),#1625);+#1621 = LINE('',#1622,#1623);+#1622 = CARTESIAN_POINT('',(0.,-0.15));+#1623 = VECTOR('',#1624,1.);+#1624 = DIRECTION('',(0.,1.));+#1625 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1626 = PCURVE('',#1547,#1627);+#1627 = DEFINITIONAL_REPRESENTATION('',(#1628),#1632);+#1628 = LINE('',#1629,#1630);+#1629 = CARTESIAN_POINT('',(0.529793591883,-0.15));+#1630 = VECTOR('',#1631,1.);+#1631 = DIRECTION('',(0.,1.));+#1632 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1633 = ORIENTED_EDGE('',*,*,#1634,.T.);+#1634 = EDGE_CURVE('',#1612,#1635,#1637,.T.);+#1635 = VERTEX_POINT('',#1636);+#1636 = CARTESIAN_POINT('',(-2.15,2.125,0.445));+#1637 = SURFACE_CURVE('',#1638,(#1642,#1649),.PCURVE_S1.);+#1638 = LINE('',#1639,#1640);+#1639 = CARTESIAN_POINT('',(-2.2,2.125,0.445));+#1640 = VECTOR('',#1641,1.);+#1641 = DIRECTION('',(1.,0.,0.));+#1642 = PCURVE('',#1575,#1643);+#1643 = DEFINITIONAL_REPRESENTATION('',(#1644),#1648);+#1644 = LINE('',#1645,#1646);+#1645 = CARTESIAN_POINT('',(0.,-0.15));+#1646 = VECTOR('',#1647,1.);+#1647 = DIRECTION('',(1.,0.));+#1648 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1649 = PCURVE('',#1354,#1650);+#1650 = DEFINITIONAL_REPRESENTATION('',(#1651),#1655);+#1651 = LINE('',#1652,#1653);+#1652 = CARTESIAN_POINT('',(-0.227057976796,0.434182274245));+#1653 = VECTOR('',#1654,1.);+#1654 = DIRECTION('',(0.,1.));+#1655 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1656 = ORIENTED_EDGE('',*,*,#1657,.T.);+#1657 = EDGE_CURVE('',#1635,#1560,#1658,.T.);+#1658 = SURFACE_CURVE('',#1659,(#1663,#1670),.PCURVE_S1.);+#1659 = LINE('',#1660,#1661);+#1660 = CARTESIAN_POINT('',(-2.15,2.125,0.445));+#1661 = VECTOR('',#1662,1.);+#1662 = DIRECTION('',(0.,1.,0.));+#1663 = PCURVE('',#1575,#1664);+#1664 = DEFINITIONAL_REPRESENTATION('',(#1665),#1669);+#1665 = LINE('',#1666,#1667);+#1666 = CARTESIAN_POINT('',(5.E-02,-0.15));+#1667 = VECTOR('',#1668,1.);+#1668 = DIRECTION('',(0.,1.));+#1669 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1670 = PCURVE('',#1326,#1671);+#1671 = DEFINITIONAL_REPRESENTATION('',(#1672),#1676);+#1672 = LINE('',#1673,#1674);+#1673 = CARTESIAN_POINT('',(0.,-0.15));+#1674 = VECTOR('',#1675,1.);+#1675 = DIRECTION('',(0.,1.));+#1676 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1677 = ORIENTED_EDGE('',*,*,#1559,.F.);+#1678 = ADVANCED_FACE('',(#1679),#1547,.F.);+#1679 = FACE_BOUND('',#1680,.F.);+#1680 = EDGE_LOOP('',(#1681,#1704,#1705,#1706));+#1681 = ORIENTED_EDGE('',*,*,#1682,.T.);+#1682 = EDGE_CURVE('',#1683,#1612,#1685,.T.);+#1683 = VERTEX_POINT('',#1684);+#1684 = CARTESIAN_POINT('',(-2.4875,2.125,0.));+#1685 = SURFACE_CURVE('',#1686,(#1690,#1697),.PCURVE_S1.);+#1686 = LINE('',#1687,#1688);+#1687 = CARTESIAN_POINT('',(-2.4875,2.125,0.));+#1688 = VECTOR('',#1689,1.);+#1689 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#1690 = PCURVE('',#1547,#1691);+#1691 = DEFINITIONAL_REPRESENTATION('',(#1692),#1696);+#1692 = LINE('',#1693,#1694);+#1693 = CARTESIAN_POINT('',(0.,-0.15));+#1694 = VECTOR('',#1695,1.);+#1695 = DIRECTION('',(1.,0.));+#1696 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1697 = PCURVE('',#1354,#1698);+#1698 = DEFINITIONAL_REPRESENTATION('',(#1699),#1703);+#1699 = LINE('',#1700,#1701);+#1700 = CARTESIAN_POINT('',(0.217942023204,0.146682274245));+#1701 = VECTOR('',#1702,1.);+#1702 = DIRECTION('',(-0.839949759337,0.542664170358));+#1703 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1704 = ORIENTED_EDGE('',*,*,#1611,.T.);+#1705 = ORIENTED_EDGE('',*,*,#1531,.F.);+#1706 = ORIENTED_EDGE('',*,*,#1707,.T.);+#1707 = EDGE_CURVE('',#1504,#1683,#1708,.T.);+#1708 = SURFACE_CURVE('',#1709,(#1713,#1720),.PCURVE_S1.);+#1709 = LINE('',#1710,#1711);+#1710 = CARTESIAN_POINT('',(-2.4875,2.425,0.));+#1711 = VECTOR('',#1712,1.);+#1712 = DIRECTION('',(0.,-1.,0.));+#1713 = PCURVE('',#1547,#1714);+#1714 = DEFINITIONAL_REPRESENTATION('',(#1715),#1719);+#1715 = LINE('',#1716,#1717);+#1716 = CARTESIAN_POINT('',(0.,0.15));+#1717 = VECTOR('',#1718,1.);+#1718 = DIRECTION('',(0.,-1.));+#1719 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1720 = PCURVE('',#1519,#1721);+#1721 = DEFINITIONAL_REPRESENTATION('',(#1722),#1726);+#1722 = LINE('',#1723,#1724);+#1723 = CARTESIAN_POINT('',(0.7175,0.15));+#1724 = VECTOR('',#1725,1.);+#1725 = DIRECTION('',(0.,-1.));+#1726 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1727 = ADVANCED_FACE('',(#1728),#1519,.F.);+#1728 = FACE_BOUND('',#1729,.F.);+#1729 = EDGE_LOOP('',(#1730,#1753,#1754,#1755));+#1730 = ORIENTED_EDGE('',*,*,#1731,.T.);+#1731 = EDGE_CURVE('',#1732,#1683,#1734,.T.);+#1732 = VERTEX_POINT('',#1733);+#1733 = CARTESIAN_POINT('',(-3.205,2.125,0.));+#1734 = SURFACE_CURVE('',#1735,(#1739,#1746),.PCURVE_S1.);+#1735 = LINE('',#1736,#1737);+#1736 = CARTESIAN_POINT('',(-3.205,2.125,0.));+#1737 = VECTOR('',#1738,1.);+#1738 = DIRECTION('',(1.,0.,0.));+#1739 = PCURVE('',#1519,#1740);+#1740 = DEFINITIONAL_REPRESENTATION('',(#1741),#1745);+#1741 = LINE('',#1742,#1743);+#1742 = CARTESIAN_POINT('',(0.,-0.15));+#1743 = VECTOR('',#1744,1.);+#1744 = DIRECTION('',(1.,0.));+#1745 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1746 = PCURVE('',#1354,#1747);+#1747 = DEFINITIONAL_REPRESENTATION('',(#1748),#1752);+#1748 = LINE('',#1749,#1750);+#1749 = CARTESIAN_POINT('',(0.217942023204,-0.570817725755));+#1750 = VECTOR('',#1751,1.);+#1751 = DIRECTION('',(0.,1.));+#1752 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1753 = ORIENTED_EDGE('',*,*,#1707,.F.);+#1754 = ORIENTED_EDGE('',*,*,#1503,.F.);+#1755 = ORIENTED_EDGE('',*,*,#1756,.T.);+#1756 = EDGE_CURVE('',#1476,#1732,#1757,.T.);+#1757 = SURFACE_CURVE('',#1758,(#1762,#1769),.PCURVE_S1.);+#1758 = LINE('',#1759,#1760);+#1759 = CARTESIAN_POINT('',(-3.205,2.425,0.));+#1760 = VECTOR('',#1761,1.);+#1761 = DIRECTION('',(0.,-1.,0.));+#1762 = PCURVE('',#1519,#1763);+#1763 = DEFINITIONAL_REPRESENTATION('',(#1764),#1768);+#1764 = LINE('',#1765,#1766);+#1765 = CARTESIAN_POINT('',(0.,0.15));+#1766 = VECTOR('',#1767,1.);+#1767 = DIRECTION('',(0.,-1.));+#1768 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1769 = PCURVE('',#1491,#1770);+#1770 = DEFINITIONAL_REPRESENTATION('',(#1771),#1775);+#1771 = LINE('',#1772,#1773);+#1772 = CARTESIAN_POINT('',(0.15,0.15));+#1773 = VECTOR('',#1774,1.);+#1774 = DIRECTION('',(0.,-1.));+#1775 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1776 = ADVANCED_FACE('',(#1777),#1491,.F.);+#1777 = FACE_BOUND('',#1778,.F.);+#1778 = EDGE_LOOP('',(#1779,#1802,#1803,#1804));+#1779 = ORIENTED_EDGE('',*,*,#1780,.T.);+#1780 = EDGE_CURVE('',#1781,#1732,#1783,.T.);+#1781 = VERTEX_POINT('',#1782);+#1782 = CARTESIAN_POINT('',(-3.205,2.125,0.15));+#1783 = SURFACE_CURVE('',#1784,(#1788,#1795),.PCURVE_S1.);+#1784 = LINE('',#1785,#1786);+#1785 = CARTESIAN_POINT('',(-3.205,2.125,0.15));+#1786 = VECTOR('',#1787,1.);+#1787 = DIRECTION('',(0.,0.,-1.));+#1788 = PCURVE('',#1491,#1789);+#1789 = DEFINITIONAL_REPRESENTATION('',(#1790),#1794);+#1790 = LINE('',#1791,#1792);+#1791 = CARTESIAN_POINT('',(0.,-0.15));+#1792 = VECTOR('',#1793,1.);+#1793 = DIRECTION('',(1.,0.));+#1794 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1795 = PCURVE('',#1354,#1796);+#1796 = DEFINITIONAL_REPRESENTATION('',(#1797),#1801);+#1797 = LINE('',#1798,#1799);+#1798 = CARTESIAN_POINT('',(6.7942023204E-02,-0.570817725755));+#1799 = VECTOR('',#1800,1.);+#1800 = DIRECTION('',(1.,0.));+#1801 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1802 = ORIENTED_EDGE('',*,*,#1756,.F.);+#1803 = ORIENTED_EDGE('',*,*,#1475,.F.);+#1804 = ORIENTED_EDGE('',*,*,#1805,.T.);+#1805 = EDGE_CURVE('',#1448,#1781,#1806,.T.);+#1806 = SURFACE_CURVE('',#1807,(#1811,#1818),.PCURVE_S1.);+#1807 = LINE('',#1808,#1809);+#1808 = CARTESIAN_POINT('',(-3.205,2.425,0.15));+#1809 = VECTOR('',#1810,1.);+#1810 = DIRECTION('',(0.,-1.,0.));+#1811 = PCURVE('',#1491,#1812);+#1812 = DEFINITIONAL_REPRESENTATION('',(#1813),#1817);+#1813 = LINE('',#1814,#1815);+#1814 = CARTESIAN_POINT('',(0.,0.15));+#1815 = VECTOR('',#1816,1.);+#1816 = DIRECTION('',(0.,-1.));+#1817 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1818 = PCURVE('',#1463,#1819);+#1819 = DEFINITIONAL_REPRESENTATION('',(#1820),#1824);+#1820 = LINE('',#1821,#1822);+#1821 = CARTESIAN_POINT('',(0.5675,0.15));+#1822 = VECTOR('',#1823,1.);+#1823 = DIRECTION('',(0.,-1.));+#1824 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1825 = ADVANCED_FACE('',(#1826),#1463,.F.);+#1826 = FACE_BOUND('',#1827,.F.);+#1827 = EDGE_LOOP('',(#1828,#1851,#1852,#1853));+#1828 = ORIENTED_EDGE('',*,*,#1829,.T.);+#1829 = EDGE_CURVE('',#1830,#1781,#1832,.T.);+#1830 = VERTEX_POINT('',#1831);+#1831 = CARTESIAN_POINT('',(-2.6375,2.125,0.15));+#1832 = SURFACE_CURVE('',#1833,(#1837,#1844),.PCURVE_S1.);+#1833 = LINE('',#1834,#1835);+#1834 = CARTESIAN_POINT('',(-2.6375,2.125,0.15));+#1835 = VECTOR('',#1836,1.);+#1836 = DIRECTION('',(-1.,0.,0.));+#1837 = PCURVE('',#1463,#1838);+#1838 = DEFINITIONAL_REPRESENTATION('',(#1839),#1843);+#1839 = LINE('',#1840,#1841);+#1840 = CARTESIAN_POINT('',(0.,-0.15));+#1841 = VECTOR('',#1842,1.);+#1842 = DIRECTION('',(1.,0.));+#1843 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1844 = PCURVE('',#1354,#1845);+#1845 = DEFINITIONAL_REPRESENTATION('',(#1846),#1850);+#1846 = LINE('',#1847,#1848);+#1847 = CARTESIAN_POINT('',(6.7942023204E-02,-3.317725755E-03));+#1848 = VECTOR('',#1849,1.);+#1849 = DIRECTION('',(0.,-1.));+#1850 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1851 = ORIENTED_EDGE('',*,*,#1805,.F.);+#1852 = ORIENTED_EDGE('',*,*,#1447,.F.);+#1853 = ORIENTED_EDGE('',*,*,#1854,.T.);+#1854 = EDGE_CURVE('',#1425,#1830,#1855,.T.);+#1855 = SURFACE_CURVE('',#1856,(#1860,#1867),.PCURVE_S1.);+#1856 = LINE('',#1857,#1858);+#1857 = CARTESIAN_POINT('',(-2.6375,2.425,0.15));+#1858 = VECTOR('',#1859,1.);+#1859 = DIRECTION('',(0.,-1.,0.));+#1860 = PCURVE('',#1463,#1861);+#1861 = DEFINITIONAL_REPRESENTATION('',(#1862),#1866);+#1862 = LINE('',#1863,#1864);+#1863 = CARTESIAN_POINT('',(0.,0.15));+#1864 = VECTOR('',#1865,1.);+#1865 = DIRECTION('',(0.,-1.));+#1866 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1867 = PCURVE('',#1382,#1868);+#1868 = DEFINITIONAL_REPRESENTATION('',(#1869),#1873);+#1869 = LINE('',#1870,#1871);+#1870 = CARTESIAN_POINT('',(0.529793591883,0.15));+#1871 = VECTOR('',#1872,1.);+#1872 = DIRECTION('',(-0.,-1.));+#1873 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1874 = ADVANCED_FACE('',(#1875),#1382,.F.);+#1875 = FACE_BOUND('',#1876,.F.);+#1876 = EDGE_LOOP('',(#1877,#1898,#1899,#1900));+#1877 = ORIENTED_EDGE('',*,*,#1878,.T.);+#1878 = EDGE_CURVE('',#1339,#1830,#1879,.T.);+#1879 = SURFACE_CURVE('',#1880,(#1884,#1891),.PCURVE_S1.);+#1880 = LINE('',#1881,#1882);+#1881 = CARTESIAN_POINT('',(-2.35,2.125,0.595));+#1882 = VECTOR('',#1883,1.);+#1883 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#1884 = PCURVE('',#1382,#1885);+#1885 = DEFINITIONAL_REPRESENTATION('',(#1886),#1890);+#1886 = LINE('',#1887,#1888);+#1887 = CARTESIAN_POINT('',(-0.,-0.15));+#1888 = VECTOR('',#1889,1.);+#1889 = DIRECTION('',(1.,0.));+#1890 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1891 = PCURVE('',#1354,#1892);+#1892 = DEFINITIONAL_REPRESENTATION('',(#1893),#1897);+#1893 = LINE('',#1894,#1895);+#1894 = CARTESIAN_POINT('',(-0.377057976796,0.284182274245));+#1895 = VECTOR('',#1896,1.);+#1896 = DIRECTION('',(0.839949759337,-0.542664170358));+#1897 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1898 = ORIENTED_EDGE('',*,*,#1854,.F.);+#1899 = ORIENTED_EDGE('',*,*,#1424,.F.);+#1900 = ORIENTED_EDGE('',*,*,#1366,.T.);+#1901 = ADVANCED_FACE('',(#1902),#1354,.T.);+#1902 = FACE_BOUND('',#1903,.T.);+#1903 = EDGE_LOOP('',(#1904,#1905,#1906,#1907,#1908,#1909,#1910,#1911));+#1904 = ORIENTED_EDGE('',*,*,#1338,.T.);+#1905 = ORIENTED_EDGE('',*,*,#1878,.T.);+#1906 = ORIENTED_EDGE('',*,*,#1829,.T.);+#1907 = ORIENTED_EDGE('',*,*,#1780,.T.);+#1908 = ORIENTED_EDGE('',*,*,#1731,.T.);+#1909 = ORIENTED_EDGE('',*,*,#1682,.T.);+#1910 = ORIENTED_EDGE('',*,*,#1634,.T.);+#1911 = ORIENTED_EDGE('',*,*,#1912,.T.);+#1912 = EDGE_CURVE('',#1635,#1304,#1913,.T.);+#1913 = SURFACE_CURVE('',#1914,(#1918,#1925),.PCURVE_S1.);+#1914 = LINE('',#1915,#1916);+#1915 = CARTESIAN_POINT('',(-2.15,2.125,0.445));+#1916 = VECTOR('',#1917,1.);+#1917 = DIRECTION('',(0.,0.,1.));+#1918 = PCURVE('',#1354,#1919);+#1919 = DEFINITIONAL_REPRESENTATION('',(#1920),#1924);+#1920 = LINE('',#1921,#1922);+#1921 = CARTESIAN_POINT('',(-0.227057976796,0.484182274245));+#1922 = VECTOR('',#1923,1.);+#1923 = DIRECTION('',(-1.,0.));+#1924 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1925 = PCURVE('',#1326,#1926);+#1926 = DEFINITIONAL_REPRESENTATION('',(#1927),#1931);+#1927 = LINE('',#1928,#1929);+#1928 = CARTESIAN_POINT('',(0.,-0.15));+#1929 = VECTOR('',#1930,1.);+#1930 = DIRECTION('',(1.,0.));+#1931 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1932 = ADVANCED_FACE('',(#1933),#1326,.F.);+#1933 = FACE_BOUND('',#1934,.F.);+#1934 = EDGE_LOOP('',(#1935,#1936,#1937,#1938));+#1935 = ORIENTED_EDGE('',*,*,#1657,.F.);+#1936 = ORIENTED_EDGE('',*,*,#1912,.T.);+#1937 = ORIENTED_EDGE('',*,*,#1303,.T.);+#1938 = ORIENTED_EDGE('',*,*,#1587,.F.);+#1939 = MANIFOLD_SOLID_BREP('',#1940);+#1940 = CLOSED_SHELL('',(#1941,#2061,#2249,#2320,#2369,#2418,#2467,#2516+ ,#2543,#2574));+#1941 = ADVANCED_FACE('',(#1942),#1956,.F.);+#1942 = FACE_BOUND('',#1943,.F.);+#1943 = EDGE_LOOP('',(#1944,#1979,#2007,#2035));+#1944 = ORIENTED_EDGE('',*,*,#1945,.F.);+#1945 = EDGE_CURVE('',#1946,#1948,#1950,.T.);+#1946 = VERTEX_POINT('',#1947);+#1947 = CARTESIAN_POINT('',(-2.15,1.475,0.595));+#1948 = VERTEX_POINT('',#1949);+#1949 = CARTESIAN_POINT('',(-2.15,1.775,0.595));+#1950 = SURFACE_CURVE('',#1951,(#1955,#1967),.PCURVE_S1.);+#1951 = LINE('',#1952,#1953);+#1952 = CARTESIAN_POINT('',(-2.15,1.475,0.595));+#1953 = VECTOR('',#1954,1.);+#1954 = DIRECTION('',(0.,1.,0.));+#1955 = PCURVE('',#1956,#1961);+#1956 = PLANE('',#1957);+#1957 = AXIS2_PLACEMENT_3D('',#1958,#1959,#1960);+#1958 = CARTESIAN_POINT('',(-2.15,1.625,0.595));+#1959 = DIRECTION('',(-0.,-0.,-1.));+#1960 = DIRECTION('',(-1.,0.,0.));+#1961 = DEFINITIONAL_REPRESENTATION('',(#1962),#1966);+#1962 = LINE('',#1963,#1964);+#1963 = CARTESIAN_POINT('',(0.,-0.15));+#1964 = VECTOR('',#1965,1.);+#1965 = DIRECTION('',(0.,1.));+#1966 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1967 = PCURVE('',#1968,#1973);+#1968 = PLANE('',#1969);+#1969 = AXIS2_PLACEMENT_3D('',#1970,#1971,#1972);+#1970 = CARTESIAN_POINT('',(-2.15,1.625,0.445));+#1971 = DIRECTION('',(-1.,0.,0.));+#1972 = DIRECTION('',(0.,0.,1.));+#1973 = DEFINITIONAL_REPRESENTATION('',(#1974),#1978);+#1974 = LINE('',#1975,#1976);+#1975 = CARTESIAN_POINT('',(0.15,-0.15));+#1976 = VECTOR('',#1977,1.);+#1977 = DIRECTION('',(0.,1.));+#1978 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1979 = ORIENTED_EDGE('',*,*,#1980,.T.);+#1980 = EDGE_CURVE('',#1946,#1981,#1983,.T.);+#1981 = VERTEX_POINT('',#1982);+#1982 = CARTESIAN_POINT('',(-2.35,1.475,0.595));+#1983 = SURFACE_CURVE('',#1984,(#1988,#1995),.PCURVE_S1.);+#1984 = LINE('',#1985,#1986);+#1985 = CARTESIAN_POINT('',(-2.15,1.475,0.595));+#1986 = VECTOR('',#1987,1.);+#1987 = DIRECTION('',(-1.,0.,0.));+#1988 = PCURVE('',#1956,#1989);+#1989 = DEFINITIONAL_REPRESENTATION('',(#1990),#1994);+#1990 = LINE('',#1991,#1992);+#1991 = CARTESIAN_POINT('',(0.,-0.15));+#1992 = VECTOR('',#1993,1.);+#1993 = DIRECTION('',(1.,0.));+#1994 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1995 = PCURVE('',#1996,#2001);+#1996 = PLANE('',#1997);+#1997 = AXIS2_PLACEMENT_3D('',#1998,#1999,#2000);+#1998 = CARTESIAN_POINT('',(-2.634182274245,1.475,0.217942023204));+#1999 = DIRECTION('',(-0.,-1.,-0.));+#2000 = DIRECTION('',(0.,0.,-1.));+#2001 = DEFINITIONAL_REPRESENTATION('',(#2002),#2006);+#2002 = LINE('',#2003,#2004);+#2003 = CARTESIAN_POINT('',(-0.377057976796,0.484182274245));+#2004 = VECTOR('',#2005,1.);+#2005 = DIRECTION('',(0.,-1.));+#2006 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2007 = ORIENTED_EDGE('',*,*,#2008,.F.);+#2008 = EDGE_CURVE('',#2009,#1981,#2011,.T.);+#2009 = VERTEX_POINT('',#2010);+#2010 = CARTESIAN_POINT('',(-2.35,1.775,0.595));+#2011 = SURFACE_CURVE('',#2012,(#2016,#2023),.PCURVE_S1.);+#2012 = LINE('',#2013,#2014);+#2013 = CARTESIAN_POINT('',(-2.35,1.775,0.595));+#2014 = VECTOR('',#2015,1.);+#2015 = DIRECTION('',(0.,-1.,0.));+#2016 = PCURVE('',#1956,#2017);+#2017 = DEFINITIONAL_REPRESENTATION('',(#2018),#2022);+#2018 = LINE('',#2019,#2020);+#2019 = CARTESIAN_POINT('',(0.2,0.15));+#2020 = VECTOR('',#2021,1.);+#2021 = DIRECTION('',(0.,-1.));+#2022 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2023 = PCURVE('',#2024,#2029);+#2024 = PLANE('',#2025);+#2025 = AXIS2_PLACEMENT_3D('',#2026,#2027,#2028);+#2026 = CARTESIAN_POINT('',(-2.35,1.625,0.595));+#2027 = DIRECTION('',(0.839949759337,0.,-0.542664170358));+#2028 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#2029 = DEFINITIONAL_REPRESENTATION('',(#2030),#2034);+#2030 = LINE('',#2031,#2032);+#2031 = CARTESIAN_POINT('',(0.,0.15));+#2032 = VECTOR('',#2033,1.);+#2033 = DIRECTION('',(-0.,-1.));+#2034 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2035 = ORIENTED_EDGE('',*,*,#2036,.F.);+#2036 = EDGE_CURVE('',#1948,#2009,#2037,.T.);+#2037 = SURFACE_CURVE('',#2038,(#2042,#2049),.PCURVE_S1.);+#2038 = LINE('',#2039,#2040);+#2039 = CARTESIAN_POINT('',(-2.15,1.775,0.595));+#2040 = VECTOR('',#2041,1.);+#2041 = DIRECTION('',(-1.,0.,0.));+#2042 = PCURVE('',#1956,#2043);+#2043 = DEFINITIONAL_REPRESENTATION('',(#2044),#2048);+#2044 = LINE('',#2045,#2046);+#2045 = CARTESIAN_POINT('',(0.,0.15));+#2046 = VECTOR('',#2047,1.);+#2047 = DIRECTION('',(1.,0.));+#2048 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2049 = PCURVE('',#2050,#2055);+#2050 = PLANE('',#2051);+#2051 = AXIS2_PLACEMENT_3D('',#2052,#2053,#2054);+#2052 = CARTESIAN_POINT('',(-2.634182274245,1.775,0.217942023204));+#2053 = DIRECTION('',(-0.,-1.,-0.));+#2054 = DIRECTION('',(0.,0.,-1.));+#2055 = DEFINITIONAL_REPRESENTATION('',(#2056),#2060);+#2056 = LINE('',#2057,#2058);+#2057 = CARTESIAN_POINT('',(-0.377057976796,0.484182274245));+#2058 = VECTOR('',#2059,1.);+#2059 = DIRECTION('',(0.,-1.));+#2060 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2061 = ADVANCED_FACE('',(#2062),#2050,.F.);+#2062 = FACE_BOUND('',#2063,.F.);+#2063 = EDGE_LOOP('',(#2064,#2065,#2088,#2116,#2144,#2172,#2200,#2228));+#2064 = ORIENTED_EDGE('',*,*,#2036,.T.);+#2065 = ORIENTED_EDGE('',*,*,#2066,.T.);+#2066 = EDGE_CURVE('',#2009,#2067,#2069,.T.);+#2067 = VERTEX_POINT('',#2068);+#2068 = CARTESIAN_POINT('',(-2.6375,1.775,0.15));+#2069 = SURFACE_CURVE('',#2070,(#2074,#2081),.PCURVE_S1.);+#2070 = LINE('',#2071,#2072);+#2071 = CARTESIAN_POINT('',(-2.35,1.775,0.595));+#2072 = VECTOR('',#2073,1.);+#2073 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#2074 = PCURVE('',#2050,#2075);+#2075 = DEFINITIONAL_REPRESENTATION('',(#2076),#2080);+#2076 = LINE('',#2077,#2078);+#2077 = CARTESIAN_POINT('',(-0.377057976796,0.284182274245));+#2078 = VECTOR('',#2079,1.);+#2079 = DIRECTION('',(0.839949759337,-0.542664170358));+#2080 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2081 = PCURVE('',#2024,#2082);+#2082 = DEFINITIONAL_REPRESENTATION('',(#2083),#2087);+#2083 = LINE('',#2084,#2085);+#2084 = CARTESIAN_POINT('',(0.,0.15));+#2085 = VECTOR('',#2086,1.);+#2086 = DIRECTION('',(1.,0.));+#2087 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2088 = ORIENTED_EDGE('',*,*,#2089,.T.);+#2089 = EDGE_CURVE('',#2067,#2090,#2092,.T.);+#2090 = VERTEX_POINT('',#2091);+#2091 = CARTESIAN_POINT('',(-3.205,1.775,0.15));+#2092 = SURFACE_CURVE('',#2093,(#2097,#2104),.PCURVE_S1.);+#2093 = LINE('',#2094,#2095);+#2094 = CARTESIAN_POINT('',(-2.6375,1.775,0.15));+#2095 = VECTOR('',#2096,1.);+#2096 = DIRECTION('',(-1.,0.,0.));+#2097 = PCURVE('',#2050,#2098);+#2098 = DEFINITIONAL_REPRESENTATION('',(#2099),#2103);+#2099 = LINE('',#2100,#2101);+#2100 = CARTESIAN_POINT('',(6.7942023204E-02,-3.317725755E-03));+#2101 = VECTOR('',#2102,1.);+#2102 = DIRECTION('',(0.,-1.));+#2103 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2104 = PCURVE('',#2105,#2110);+#2105 = PLANE('',#2106);+#2106 = AXIS2_PLACEMENT_3D('',#2107,#2108,#2109);+#2107 = CARTESIAN_POINT('',(-2.6375,1.625,0.15));+#2108 = DIRECTION('',(-0.,-0.,-1.));+#2109 = DIRECTION('',(-1.,0.,0.));+#2110 = DEFINITIONAL_REPRESENTATION('',(#2111),#2115);+#2111 = LINE('',#2112,#2113);+#2112 = CARTESIAN_POINT('',(0.,0.15));+#2113 = VECTOR('',#2114,1.);+#2114 = DIRECTION('',(1.,0.));+#2115 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2116 = ORIENTED_EDGE('',*,*,#2117,.T.);+#2117 = EDGE_CURVE('',#2090,#2118,#2120,.T.);+#2118 = VERTEX_POINT('',#2119);+#2119 = CARTESIAN_POINT('',(-3.205,1.775,0.));+#2120 = SURFACE_CURVE('',#2121,(#2125,#2132),.PCURVE_S1.);+#2121 = LINE('',#2122,#2123);+#2122 = CARTESIAN_POINT('',(-3.205,1.775,0.15));+#2123 = VECTOR('',#2124,1.);+#2124 = DIRECTION('',(0.,0.,-1.));+#2125 = PCURVE('',#2050,#2126);+#2126 = DEFINITIONAL_REPRESENTATION('',(#2127),#2131);+#2127 = LINE('',#2128,#2129);+#2128 = CARTESIAN_POINT('',(6.7942023204E-02,-0.570817725755));+#2129 = VECTOR('',#2130,1.);+#2130 = DIRECTION('',(1.,0.));+#2131 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2132 = PCURVE('',#2133,#2138);+#2133 = PLANE('',#2134);+#2134 = AXIS2_PLACEMENT_3D('',#2135,#2136,#2137);+#2135 = CARTESIAN_POINT('',(-3.205,1.625,0.15));+#2136 = DIRECTION('',(1.,0.,0.));+#2137 = DIRECTION('',(0.,0.,-1.));+#2138 = DEFINITIONAL_REPRESENTATION('',(#2139),#2143);+#2139 = LINE('',#2140,#2141);+#2140 = CARTESIAN_POINT('',(0.,0.15));+#2141 = VECTOR('',#2142,1.);+#2142 = DIRECTION('',(1.,0.));+#2143 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2144 = ORIENTED_EDGE('',*,*,#2145,.T.);+#2145 = EDGE_CURVE('',#2118,#2146,#2148,.T.);+#2146 = VERTEX_POINT('',#2147);+#2147 = CARTESIAN_POINT('',(-2.4875,1.775,0.));+#2148 = SURFACE_CURVE('',#2149,(#2153,#2160),.PCURVE_S1.);+#2149 = LINE('',#2150,#2151);+#2150 = CARTESIAN_POINT('',(-3.205,1.775,0.));+#2151 = VECTOR('',#2152,1.);+#2152 = DIRECTION('',(1.,0.,0.));+#2153 = PCURVE('',#2050,#2154);+#2154 = DEFINITIONAL_REPRESENTATION('',(#2155),#2159);+#2155 = LINE('',#2156,#2157);+#2156 = CARTESIAN_POINT('',(0.217942023204,-0.570817725755));+#2157 = VECTOR('',#2158,1.);+#2158 = DIRECTION('',(0.,1.));+#2159 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2160 = PCURVE('',#2161,#2166);+#2161 = PLANE('',#2162);+#2162 = AXIS2_PLACEMENT_3D('',#2163,#2164,#2165);+#2163 = CARTESIAN_POINT('',(-3.205,1.625,0.));+#2164 = DIRECTION('',(0.,0.,1.));+#2165 = DIRECTION('',(1.,0.,0.));+#2166 = DEFINITIONAL_REPRESENTATION('',(#2167),#2171);+#2167 = LINE('',#2168,#2169);+#2168 = CARTESIAN_POINT('',(0.,0.15));+#2169 = VECTOR('',#2170,1.);+#2170 = DIRECTION('',(1.,0.));+#2171 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2172 = ORIENTED_EDGE('',*,*,#2173,.T.);+#2173 = EDGE_CURVE('',#2146,#2174,#2176,.T.);+#2174 = VERTEX_POINT('',#2175);+#2175 = CARTESIAN_POINT('',(-2.2,1.775,0.445));+#2176 = SURFACE_CURVE('',#2177,(#2181,#2188),.PCURVE_S1.);+#2177 = LINE('',#2178,#2179);+#2178 = CARTESIAN_POINT('',(-2.4875,1.775,0.));+#2179 = VECTOR('',#2180,1.);+#2180 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#2181 = PCURVE('',#2050,#2182);+#2182 = DEFINITIONAL_REPRESENTATION('',(#2183),#2187);+#2183 = LINE('',#2184,#2185);+#2184 = CARTESIAN_POINT('',(0.217942023204,0.146682274245));+#2185 = VECTOR('',#2186,1.);+#2186 = DIRECTION('',(-0.839949759337,0.542664170358));+#2187 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2188 = PCURVE('',#2189,#2194);+#2189 = PLANE('',#2190);+#2190 = AXIS2_PLACEMENT_3D('',#2191,#2192,#2193);+#2191 = CARTESIAN_POINT('',(-2.4875,1.625,0.));+#2192 = DIRECTION('',(-0.839949759337,0.,0.542664170358));+#2193 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#2194 = DEFINITIONAL_REPRESENTATION('',(#2195),#2199);+#2195 = LINE('',#2196,#2197);+#2196 = CARTESIAN_POINT('',(0.,0.15));+#2197 = VECTOR('',#2198,1.);+#2198 = DIRECTION('',(1.,0.));+#2199 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2200 = ORIENTED_EDGE('',*,*,#2201,.T.);+#2201 = EDGE_CURVE('',#2174,#2202,#2204,.T.);+#2202 = VERTEX_POINT('',#2203);+#2203 = CARTESIAN_POINT('',(-2.15,1.775,0.445));+#2204 = SURFACE_CURVE('',#2205,(#2209,#2216),.PCURVE_S1.);+#2205 = LINE('',#2206,#2207);+#2206 = CARTESIAN_POINT('',(-2.2,1.775,0.445));+#2207 = VECTOR('',#2208,1.);+#2208 = DIRECTION('',(1.,0.,0.));+#2209 = PCURVE('',#2050,#2210);+#2210 = DEFINITIONAL_REPRESENTATION('',(#2211),#2215);+#2211 = LINE('',#2212,#2213);+#2212 = CARTESIAN_POINT('',(-0.227057976796,0.434182274245));+#2213 = VECTOR('',#2214,1.);+#2214 = DIRECTION('',(0.,1.));+#2215 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2216 = PCURVE('',#2217,#2222);+#2217 = PLANE('',#2218);+#2218 = AXIS2_PLACEMENT_3D('',#2219,#2220,#2221);+#2219 = CARTESIAN_POINT('',(-2.2,1.625,0.445));+#2220 = DIRECTION('',(0.,0.,1.));+#2221 = DIRECTION('',(1.,0.,0.));+#2222 = DEFINITIONAL_REPRESENTATION('',(#2223),#2227);+#2223 = LINE('',#2224,#2225);+#2224 = CARTESIAN_POINT('',(0.,0.15));+#2225 = VECTOR('',#2226,1.);+#2226 = DIRECTION('',(1.,0.));+#2227 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2228 = ORIENTED_EDGE('',*,*,#2229,.T.);+#2229 = EDGE_CURVE('',#2202,#1948,#2230,.T.);+#2230 = SURFACE_CURVE('',#2231,(#2235,#2242),.PCURVE_S1.);+#2231 = LINE('',#2232,#2233);+#2232 = CARTESIAN_POINT('',(-2.15,1.775,0.445));+#2233 = VECTOR('',#2234,1.);+#2234 = DIRECTION('',(0.,0.,1.));+#2235 = PCURVE('',#2050,#2236);+#2236 = DEFINITIONAL_REPRESENTATION('',(#2237),#2241);+#2237 = LINE('',#2238,#2239);+#2238 = CARTESIAN_POINT('',(-0.227057976796,0.484182274245));+#2239 = VECTOR('',#2240,1.);+#2240 = DIRECTION('',(-1.,0.));+#2241 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2242 = PCURVE('',#1968,#2243);+#2243 = DEFINITIONAL_REPRESENTATION('',(#2244),#2248);+#2244 = LINE('',#2245,#2246);+#2245 = CARTESIAN_POINT('',(0.,0.15));+#2246 = VECTOR('',#2247,1.);+#2247 = DIRECTION('',(1.,0.));+#2248 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2249 = ADVANCED_FACE('',(#2250),#2217,.F.);+#2250 = FACE_BOUND('',#2251,.F.);+#2251 = EDGE_LOOP('',(#2252,#2275,#2298,#2319));+#2252 = ORIENTED_EDGE('',*,*,#2253,.F.);+#2253 = EDGE_CURVE('',#2254,#2174,#2256,.T.);+#2254 = VERTEX_POINT('',#2255);+#2255 = CARTESIAN_POINT('',(-2.2,1.475,0.445));+#2256 = SURFACE_CURVE('',#2257,(#2261,#2268),.PCURVE_S1.);+#2257 = LINE('',#2258,#2259);+#2258 = CARTESIAN_POINT('',(-2.2,1.475,0.445));+#2259 = VECTOR('',#2260,1.);+#2260 = DIRECTION('',(0.,1.,0.));+#2261 = PCURVE('',#2217,#2262);+#2262 = DEFINITIONAL_REPRESENTATION('',(#2263),#2267);+#2263 = LINE('',#2264,#2265);+#2264 = CARTESIAN_POINT('',(0.,-0.15));+#2265 = VECTOR('',#2266,1.);+#2266 = DIRECTION('',(0.,1.));+#2267 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2268 = PCURVE('',#2189,#2269);+#2269 = DEFINITIONAL_REPRESENTATION('',(#2270),#2274);+#2270 = LINE('',#2271,#2272);+#2271 = CARTESIAN_POINT('',(0.529793591883,-0.15));+#2272 = VECTOR('',#2273,1.);+#2273 = DIRECTION('',(0.,1.));+#2274 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2275 = ORIENTED_EDGE('',*,*,#2276,.T.);+#2276 = EDGE_CURVE('',#2254,#2277,#2279,.T.);+#2277 = VERTEX_POINT('',#2278);+#2278 = CARTESIAN_POINT('',(-2.15,1.475,0.445));+#2279 = SURFACE_CURVE('',#2280,(#2284,#2291),.PCURVE_S1.);+#2280 = LINE('',#2281,#2282);+#2281 = CARTESIAN_POINT('',(-2.2,1.475,0.445));+#2282 = VECTOR('',#2283,1.);+#2283 = DIRECTION('',(1.,0.,0.));+#2284 = PCURVE('',#2217,#2285);+#2285 = DEFINITIONAL_REPRESENTATION('',(#2286),#2290);+#2286 = LINE('',#2287,#2288);+#2287 = CARTESIAN_POINT('',(0.,-0.15));+#2288 = VECTOR('',#2289,1.);+#2289 = DIRECTION('',(1.,0.));+#2290 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2291 = PCURVE('',#1996,#2292);+#2292 = DEFINITIONAL_REPRESENTATION('',(#2293),#2297);+#2293 = LINE('',#2294,#2295);+#2294 = CARTESIAN_POINT('',(-0.227057976796,0.434182274245));+#2295 = VECTOR('',#2296,1.);+#2296 = DIRECTION('',(0.,1.));+#2297 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2298 = ORIENTED_EDGE('',*,*,#2299,.T.);+#2299 = EDGE_CURVE('',#2277,#2202,#2300,.T.);+#2300 = SURFACE_CURVE('',#2301,(#2305,#2312),.PCURVE_S1.);+#2301 = LINE('',#2302,#2303);+#2302 = CARTESIAN_POINT('',(-2.15,1.475,0.445));+#2303 = VECTOR('',#2304,1.);+#2304 = DIRECTION('',(0.,1.,0.));+#2305 = PCURVE('',#2217,#2306);+#2306 = DEFINITIONAL_REPRESENTATION('',(#2307),#2311);+#2307 = LINE('',#2308,#2309);+#2308 = CARTESIAN_POINT('',(5.E-02,-0.15));+#2309 = VECTOR('',#2310,1.);+#2310 = DIRECTION('',(0.,1.));+#2311 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2312 = PCURVE('',#1968,#2313);+#2313 = DEFINITIONAL_REPRESENTATION('',(#2314),#2318);+#2314 = LINE('',#2315,#2316);+#2315 = CARTESIAN_POINT('',(0.,-0.15));+#2316 = VECTOR('',#2317,1.);+#2317 = DIRECTION('',(0.,1.));+#2318 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2319 = ORIENTED_EDGE('',*,*,#2201,.F.);+#2320 = ADVANCED_FACE('',(#2321),#2189,.F.);+#2321 = FACE_BOUND('',#2322,.F.);+#2322 = EDGE_LOOP('',(#2323,#2346,#2347,#2348));+#2323 = ORIENTED_EDGE('',*,*,#2324,.T.);+#2324 = EDGE_CURVE('',#2325,#2254,#2327,.T.);+#2325 = VERTEX_POINT('',#2326);+#2326 = CARTESIAN_POINT('',(-2.4875,1.475,0.));+#2327 = SURFACE_CURVE('',#2328,(#2332,#2339),.PCURVE_S1.);+#2328 = LINE('',#2329,#2330);+#2329 = CARTESIAN_POINT('',(-2.4875,1.475,0.));+#2330 = VECTOR('',#2331,1.);+#2331 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#2332 = PCURVE('',#2189,#2333);+#2333 = DEFINITIONAL_REPRESENTATION('',(#2334),#2338);+#2334 = LINE('',#2335,#2336);+#2335 = CARTESIAN_POINT('',(0.,-0.15));+#2336 = VECTOR('',#2337,1.);+#2337 = DIRECTION('',(1.,0.));+#2338 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2339 = PCURVE('',#1996,#2340);+#2340 = DEFINITIONAL_REPRESENTATION('',(#2341),#2345);+#2341 = LINE('',#2342,#2343);+#2342 = CARTESIAN_POINT('',(0.217942023204,0.146682274245));+#2343 = VECTOR('',#2344,1.);+#2344 = DIRECTION('',(-0.839949759337,0.542664170358));+#2345 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2346 = ORIENTED_EDGE('',*,*,#2253,.T.);+#2347 = ORIENTED_EDGE('',*,*,#2173,.F.);+#2348 = ORIENTED_EDGE('',*,*,#2349,.T.);+#2349 = EDGE_CURVE('',#2146,#2325,#2350,.T.);+#2350 = SURFACE_CURVE('',#2351,(#2355,#2362),.PCURVE_S1.);+#2351 = LINE('',#2352,#2353);+#2352 = CARTESIAN_POINT('',(-2.4875,1.775,0.));+#2353 = VECTOR('',#2354,1.);+#2354 = DIRECTION('',(0.,-1.,0.));+#2355 = PCURVE('',#2189,#2356);+#2356 = DEFINITIONAL_REPRESENTATION('',(#2357),#2361);+#2357 = LINE('',#2358,#2359);+#2358 = CARTESIAN_POINT('',(0.,0.15));+#2359 = VECTOR('',#2360,1.);+#2360 = DIRECTION('',(0.,-1.));+#2361 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2362 = PCURVE('',#2161,#2363);+#2363 = DEFINITIONAL_REPRESENTATION('',(#2364),#2368);+#2364 = LINE('',#2365,#2366);+#2365 = CARTESIAN_POINT('',(0.7175,0.15));+#2366 = VECTOR('',#2367,1.);+#2367 = DIRECTION('',(0.,-1.));+#2368 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2369 = ADVANCED_FACE('',(#2370),#2161,.F.);+#2370 = FACE_BOUND('',#2371,.F.);+#2371 = EDGE_LOOP('',(#2372,#2395,#2396,#2397));+#2372 = ORIENTED_EDGE('',*,*,#2373,.T.);+#2373 = EDGE_CURVE('',#2374,#2325,#2376,.T.);+#2374 = VERTEX_POINT('',#2375);+#2375 = CARTESIAN_POINT('',(-3.205,1.475,0.));+#2376 = SURFACE_CURVE('',#2377,(#2381,#2388),.PCURVE_S1.);+#2377 = LINE('',#2378,#2379);+#2378 = CARTESIAN_POINT('',(-3.205,1.475,0.));+#2379 = VECTOR('',#2380,1.);+#2380 = DIRECTION('',(1.,0.,0.));+#2381 = PCURVE('',#2161,#2382);+#2382 = DEFINITIONAL_REPRESENTATION('',(#2383),#2387);+#2383 = LINE('',#2384,#2385);+#2384 = CARTESIAN_POINT('',(0.,-0.15));+#2385 = VECTOR('',#2386,1.);+#2386 = DIRECTION('',(1.,0.));+#2387 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2388 = PCURVE('',#1996,#2389);+#2389 = DEFINITIONAL_REPRESENTATION('',(#2390),#2394);+#2390 = LINE('',#2391,#2392);+#2391 = CARTESIAN_POINT('',(0.217942023204,-0.570817725755));+#2392 = VECTOR('',#2393,1.);+#2393 = DIRECTION('',(0.,1.));+#2394 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2395 = ORIENTED_EDGE('',*,*,#2349,.F.);+#2396 = ORIENTED_EDGE('',*,*,#2145,.F.);+#2397 = ORIENTED_EDGE('',*,*,#2398,.T.);+#2398 = EDGE_CURVE('',#2118,#2374,#2399,.T.);+#2399 = SURFACE_CURVE('',#2400,(#2404,#2411),.PCURVE_S1.);+#2400 = LINE('',#2401,#2402);+#2401 = CARTESIAN_POINT('',(-3.205,1.775,0.));+#2402 = VECTOR('',#2403,1.);+#2403 = DIRECTION('',(0.,-1.,0.));+#2404 = PCURVE('',#2161,#2405);+#2405 = DEFINITIONAL_REPRESENTATION('',(#2406),#2410);+#2406 = LINE('',#2407,#2408);+#2407 = CARTESIAN_POINT('',(0.,0.15));+#2408 = VECTOR('',#2409,1.);+#2409 = DIRECTION('',(0.,-1.));+#2410 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2411 = PCURVE('',#2133,#2412);+#2412 = DEFINITIONAL_REPRESENTATION('',(#2413),#2417);+#2413 = LINE('',#2414,#2415);+#2414 = CARTESIAN_POINT('',(0.15,0.15));+#2415 = VECTOR('',#2416,1.);+#2416 = DIRECTION('',(0.,-1.));+#2417 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2418 = ADVANCED_FACE('',(#2419),#2133,.F.);+#2419 = FACE_BOUND('',#2420,.F.);+#2420 = EDGE_LOOP('',(#2421,#2444,#2445,#2446));+#2421 = ORIENTED_EDGE('',*,*,#2422,.T.);+#2422 = EDGE_CURVE('',#2423,#2374,#2425,.T.);+#2423 = VERTEX_POINT('',#2424);+#2424 = CARTESIAN_POINT('',(-3.205,1.475,0.15));+#2425 = SURFACE_CURVE('',#2426,(#2430,#2437),.PCURVE_S1.);+#2426 = LINE('',#2427,#2428);+#2427 = CARTESIAN_POINT('',(-3.205,1.475,0.15));+#2428 = VECTOR('',#2429,1.);+#2429 = DIRECTION('',(0.,0.,-1.));+#2430 = PCURVE('',#2133,#2431);+#2431 = DEFINITIONAL_REPRESENTATION('',(#2432),#2436);+#2432 = LINE('',#2433,#2434);+#2433 = CARTESIAN_POINT('',(0.,-0.15));+#2434 = VECTOR('',#2435,1.);+#2435 = DIRECTION('',(1.,0.));+#2436 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2437 = PCURVE('',#1996,#2438);+#2438 = DEFINITIONAL_REPRESENTATION('',(#2439),#2443);+#2439 = LINE('',#2440,#2441);+#2440 = CARTESIAN_POINT('',(6.7942023204E-02,-0.570817725755));+#2441 = VECTOR('',#2442,1.);+#2442 = DIRECTION('',(1.,0.));+#2443 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2444 = ORIENTED_EDGE('',*,*,#2398,.F.);+#2445 = ORIENTED_EDGE('',*,*,#2117,.F.);+#2446 = ORIENTED_EDGE('',*,*,#2447,.T.);+#2447 = EDGE_CURVE('',#2090,#2423,#2448,.T.);+#2448 = SURFACE_CURVE('',#2449,(#2453,#2460),.PCURVE_S1.);+#2449 = LINE('',#2450,#2451);+#2450 = CARTESIAN_POINT('',(-3.205,1.775,0.15));+#2451 = VECTOR('',#2452,1.);+#2452 = DIRECTION('',(0.,-1.,0.));+#2453 = PCURVE('',#2133,#2454);+#2454 = DEFINITIONAL_REPRESENTATION('',(#2455),#2459);+#2455 = LINE('',#2456,#2457);+#2456 = CARTESIAN_POINT('',(0.,0.15));+#2457 = VECTOR('',#2458,1.);+#2458 = DIRECTION('',(0.,-1.));+#2459 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2460 = PCURVE('',#2105,#2461);+#2461 = DEFINITIONAL_REPRESENTATION('',(#2462),#2466);+#2462 = LINE('',#2463,#2464);+#2463 = CARTESIAN_POINT('',(0.5675,0.15));+#2464 = VECTOR('',#2465,1.);+#2465 = DIRECTION('',(0.,-1.));+#2466 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2467 = ADVANCED_FACE('',(#2468),#2105,.F.);+#2468 = FACE_BOUND('',#2469,.F.);+#2469 = EDGE_LOOP('',(#2470,#2493,#2494,#2495));+#2470 = ORIENTED_EDGE('',*,*,#2471,.T.);+#2471 = EDGE_CURVE('',#2472,#2423,#2474,.T.);+#2472 = VERTEX_POINT('',#2473);+#2473 = CARTESIAN_POINT('',(-2.6375,1.475,0.15));+#2474 = SURFACE_CURVE('',#2475,(#2479,#2486),.PCURVE_S1.);+#2475 = LINE('',#2476,#2477);+#2476 = CARTESIAN_POINT('',(-2.6375,1.475,0.15));+#2477 = VECTOR('',#2478,1.);+#2478 = DIRECTION('',(-1.,0.,0.));+#2479 = PCURVE('',#2105,#2480);+#2480 = DEFINITIONAL_REPRESENTATION('',(#2481),#2485);+#2481 = LINE('',#2482,#2483);+#2482 = CARTESIAN_POINT('',(0.,-0.15));+#2483 = VECTOR('',#2484,1.);+#2484 = DIRECTION('',(1.,0.));+#2485 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2486 = PCURVE('',#1996,#2487);+#2487 = DEFINITIONAL_REPRESENTATION('',(#2488),#2492);+#2488 = LINE('',#2489,#2490);+#2489 = CARTESIAN_POINT('',(6.7942023204E-02,-3.317725755E-03));+#2490 = VECTOR('',#2491,1.);+#2491 = DIRECTION('',(0.,-1.));+#2492 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2493 = ORIENTED_EDGE('',*,*,#2447,.F.);+#2494 = ORIENTED_EDGE('',*,*,#2089,.F.);+#2495 = ORIENTED_EDGE('',*,*,#2496,.T.);+#2496 = EDGE_CURVE('',#2067,#2472,#2497,.T.);+#2497 = SURFACE_CURVE('',#2498,(#2502,#2509),.PCURVE_S1.);+#2498 = LINE('',#2499,#2500);+#2499 = CARTESIAN_POINT('',(-2.6375,1.775,0.15));+#2500 = VECTOR('',#2501,1.);+#2501 = DIRECTION('',(0.,-1.,0.));+#2502 = PCURVE('',#2105,#2503);+#2503 = DEFINITIONAL_REPRESENTATION('',(#2504),#2508);+#2504 = LINE('',#2505,#2506);+#2505 = CARTESIAN_POINT('',(0.,0.15));+#2506 = VECTOR('',#2507,1.);+#2507 = DIRECTION('',(0.,-1.));+#2508 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2509 = PCURVE('',#2024,#2510);+#2510 = DEFINITIONAL_REPRESENTATION('',(#2511),#2515);+#2511 = LINE('',#2512,#2513);+#2512 = CARTESIAN_POINT('',(0.529793591883,0.15));+#2513 = VECTOR('',#2514,1.);+#2514 = DIRECTION('',(-0.,-1.));+#2515 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2516 = ADVANCED_FACE('',(#2517),#2024,.F.);+#2517 = FACE_BOUND('',#2518,.F.);+#2518 = EDGE_LOOP('',(#2519,#2540,#2541,#2542));+#2519 = ORIENTED_EDGE('',*,*,#2520,.T.);+#2520 = EDGE_CURVE('',#1981,#2472,#2521,.T.);+#2521 = SURFACE_CURVE('',#2522,(#2526,#2533),.PCURVE_S1.);+#2522 = LINE('',#2523,#2524);+#2523 = CARTESIAN_POINT('',(-2.35,1.475,0.595));+#2524 = VECTOR('',#2525,1.);+#2525 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#2526 = PCURVE('',#2024,#2527);+#2527 = DEFINITIONAL_REPRESENTATION('',(#2528),#2532);+#2528 = LINE('',#2529,#2530);+#2529 = CARTESIAN_POINT('',(-0.,-0.15));+#2530 = VECTOR('',#2531,1.);+#2531 = DIRECTION('',(1.,0.));+#2532 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2533 = PCURVE('',#1996,#2534);+#2534 = DEFINITIONAL_REPRESENTATION('',(#2535),#2539);+#2535 = LINE('',#2536,#2537);+#2536 = CARTESIAN_POINT('',(-0.377057976796,0.284182274245));+#2537 = VECTOR('',#2538,1.);+#2538 = DIRECTION('',(0.839949759337,-0.542664170358));+#2539 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2540 = ORIENTED_EDGE('',*,*,#2496,.F.);+#2541 = ORIENTED_EDGE('',*,*,#2066,.F.);+#2542 = ORIENTED_EDGE('',*,*,#2008,.T.);+#2543 = ADVANCED_FACE('',(#2544),#1996,.T.);+#2544 = FACE_BOUND('',#2545,.T.);+#2545 = EDGE_LOOP('',(#2546,#2547,#2548,#2549,#2550,#2551,#2552,#2553));+#2546 = ORIENTED_EDGE('',*,*,#1980,.T.);+#2547 = ORIENTED_EDGE('',*,*,#2520,.T.);+#2548 = ORIENTED_EDGE('',*,*,#2471,.T.);+#2549 = ORIENTED_EDGE('',*,*,#2422,.T.);+#2550 = ORIENTED_EDGE('',*,*,#2373,.T.);+#2551 = ORIENTED_EDGE('',*,*,#2324,.T.);+#2552 = ORIENTED_EDGE('',*,*,#2276,.T.);+#2553 = ORIENTED_EDGE('',*,*,#2554,.T.);+#2554 = EDGE_CURVE('',#2277,#1946,#2555,.T.);+#2555 = SURFACE_CURVE('',#2556,(#2560,#2567),.PCURVE_S1.);+#2556 = LINE('',#2557,#2558);+#2557 = CARTESIAN_POINT('',(-2.15,1.475,0.445));+#2558 = VECTOR('',#2559,1.);+#2559 = DIRECTION('',(0.,0.,1.));+#2560 = PCURVE('',#1996,#2561);+#2561 = DEFINITIONAL_REPRESENTATION('',(#2562),#2566);+#2562 = LINE('',#2563,#2564);+#2563 = CARTESIAN_POINT('',(-0.227057976796,0.484182274245));+#2564 = VECTOR('',#2565,1.);+#2565 = DIRECTION('',(-1.,0.));+#2566 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2567 = PCURVE('',#1968,#2568);+#2568 = DEFINITIONAL_REPRESENTATION('',(#2569),#2573);+#2569 = LINE('',#2570,#2571);+#2570 = CARTESIAN_POINT('',(0.,-0.15));+#2571 = VECTOR('',#2572,1.);+#2572 = DIRECTION('',(1.,0.));+#2573 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2574 = ADVANCED_FACE('',(#2575),#1968,.F.);+#2575 = FACE_BOUND('',#2576,.F.);+#2576 = EDGE_LOOP('',(#2577,#2578,#2579,#2580));+#2577 = ORIENTED_EDGE('',*,*,#2299,.F.);+#2578 = ORIENTED_EDGE('',*,*,#2554,.T.);+#2579 = ORIENTED_EDGE('',*,*,#1945,.T.);+#2580 = ORIENTED_EDGE('',*,*,#2229,.F.);+#2581 = MANIFOLD_SOLID_BREP('',#2582);+#2582 = CLOSED_SHELL('',(#2583,#2703,#2891,#2962,#3011,#3060,#3109,#3158+ ,#3185,#3216));+#2583 = ADVANCED_FACE('',(#2584),#2598,.F.);+#2584 = FACE_BOUND('',#2585,.F.);+#2585 = EDGE_LOOP('',(#2586,#2621,#2649,#2677));+#2586 = ORIENTED_EDGE('',*,*,#2587,.F.);+#2587 = EDGE_CURVE('',#2588,#2590,#2592,.T.);+#2588 = VERTEX_POINT('',#2589);+#2589 = CARTESIAN_POINT('',(-2.15,0.825,0.595));+#2590 = VERTEX_POINT('',#2591);+#2591 = CARTESIAN_POINT('',(-2.15,1.125,0.595));+#2592 = SURFACE_CURVE('',#2593,(#2597,#2609),.PCURVE_S1.);+#2593 = LINE('',#2594,#2595);+#2594 = CARTESIAN_POINT('',(-2.15,0.825,0.595));+#2595 = VECTOR('',#2596,1.);+#2596 = DIRECTION('',(0.,1.,0.));+#2597 = PCURVE('',#2598,#2603);+#2598 = PLANE('',#2599);+#2599 = AXIS2_PLACEMENT_3D('',#2600,#2601,#2602);+#2600 = CARTESIAN_POINT('',(-2.15,0.975,0.595));+#2601 = DIRECTION('',(-0.,-0.,-1.));+#2602 = DIRECTION('',(-1.,0.,0.));+#2603 = DEFINITIONAL_REPRESENTATION('',(#2604),#2608);+#2604 = LINE('',#2605,#2606);+#2605 = CARTESIAN_POINT('',(0.,-0.15));+#2606 = VECTOR('',#2607,1.);+#2607 = DIRECTION('',(0.,1.));+#2608 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2609 = PCURVE('',#2610,#2615);+#2610 = PLANE('',#2611);+#2611 = AXIS2_PLACEMENT_3D('',#2612,#2613,#2614);+#2612 = CARTESIAN_POINT('',(-2.15,0.975,0.445));+#2613 = DIRECTION('',(-1.,0.,0.));+#2614 = DIRECTION('',(0.,0.,1.));+#2615 = DEFINITIONAL_REPRESENTATION('',(#2616),#2620);+#2616 = LINE('',#2617,#2618);+#2617 = CARTESIAN_POINT('',(0.15,-0.15));+#2618 = VECTOR('',#2619,1.);+#2619 = DIRECTION('',(0.,1.));+#2620 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2621 = ORIENTED_EDGE('',*,*,#2622,.T.);+#2622 = EDGE_CURVE('',#2588,#2623,#2625,.T.);+#2623 = VERTEX_POINT('',#2624);+#2624 = CARTESIAN_POINT('',(-2.35,0.825,0.595));+#2625 = SURFACE_CURVE('',#2626,(#2630,#2637),.PCURVE_S1.);+#2626 = LINE('',#2627,#2628);+#2627 = CARTESIAN_POINT('',(-2.15,0.825,0.595));+#2628 = VECTOR('',#2629,1.);+#2629 = DIRECTION('',(-1.,0.,0.));+#2630 = PCURVE('',#2598,#2631);+#2631 = DEFINITIONAL_REPRESENTATION('',(#2632),#2636);+#2632 = LINE('',#2633,#2634);+#2633 = CARTESIAN_POINT('',(0.,-0.15));+#2634 = VECTOR('',#2635,1.);+#2635 = DIRECTION('',(1.,0.));+#2636 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2637 = PCURVE('',#2638,#2643);+#2638 = PLANE('',#2639);+#2639 = AXIS2_PLACEMENT_3D('',#2640,#2641,#2642);+#2640 = CARTESIAN_POINT('',(-2.634182274245,0.825,0.217942023204));+#2641 = DIRECTION('',(-0.,-1.,-0.));+#2642 = DIRECTION('',(0.,0.,-1.));+#2643 = DEFINITIONAL_REPRESENTATION('',(#2644),#2648);+#2644 = LINE('',#2645,#2646);+#2645 = CARTESIAN_POINT('',(-0.377057976796,0.484182274245));+#2646 = VECTOR('',#2647,1.);+#2647 = DIRECTION('',(0.,-1.));+#2648 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2649 = ORIENTED_EDGE('',*,*,#2650,.F.);+#2650 = EDGE_CURVE('',#2651,#2623,#2653,.T.);+#2651 = VERTEX_POINT('',#2652);+#2652 = CARTESIAN_POINT('',(-2.35,1.125,0.595));+#2653 = SURFACE_CURVE('',#2654,(#2658,#2665),.PCURVE_S1.);+#2654 = LINE('',#2655,#2656);+#2655 = CARTESIAN_POINT('',(-2.35,1.125,0.595));+#2656 = VECTOR('',#2657,1.);+#2657 = DIRECTION('',(0.,-1.,0.));+#2658 = PCURVE('',#2598,#2659);+#2659 = DEFINITIONAL_REPRESENTATION('',(#2660),#2664);+#2660 = LINE('',#2661,#2662);+#2661 = CARTESIAN_POINT('',(0.2,0.15));+#2662 = VECTOR('',#2663,1.);+#2663 = DIRECTION('',(0.,-1.));+#2664 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2665 = PCURVE('',#2666,#2671);+#2666 = PLANE('',#2667);+#2667 = AXIS2_PLACEMENT_3D('',#2668,#2669,#2670);+#2668 = CARTESIAN_POINT('',(-2.35,0.975,0.595));+#2669 = DIRECTION('',(0.839949759337,0.,-0.542664170358));+#2670 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#2671 = DEFINITIONAL_REPRESENTATION('',(#2672),#2676);+#2672 = LINE('',#2673,#2674);+#2673 = CARTESIAN_POINT('',(0.,0.15));+#2674 = VECTOR('',#2675,1.);+#2675 = DIRECTION('',(-0.,-1.));+#2676 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2677 = ORIENTED_EDGE('',*,*,#2678,.F.);+#2678 = EDGE_CURVE('',#2590,#2651,#2679,.T.);+#2679 = SURFACE_CURVE('',#2680,(#2684,#2691),.PCURVE_S1.);+#2680 = LINE('',#2681,#2682);+#2681 = CARTESIAN_POINT('',(-2.15,1.125,0.595));+#2682 = VECTOR('',#2683,1.);+#2683 = DIRECTION('',(-1.,0.,0.));+#2684 = PCURVE('',#2598,#2685);+#2685 = DEFINITIONAL_REPRESENTATION('',(#2686),#2690);+#2686 = LINE('',#2687,#2688);+#2687 = CARTESIAN_POINT('',(0.,0.15));+#2688 = VECTOR('',#2689,1.);+#2689 = DIRECTION('',(1.,0.));+#2690 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2691 = PCURVE('',#2692,#2697);+#2692 = PLANE('',#2693);+#2693 = AXIS2_PLACEMENT_3D('',#2694,#2695,#2696);+#2694 = CARTESIAN_POINT('',(-2.634182274245,1.125,0.217942023204));+#2695 = DIRECTION('',(-0.,-1.,-0.));+#2696 = DIRECTION('',(0.,0.,-1.));+#2697 = DEFINITIONAL_REPRESENTATION('',(#2698),#2702);+#2698 = LINE('',#2699,#2700);+#2699 = CARTESIAN_POINT('',(-0.377057976796,0.484182274245));+#2700 = VECTOR('',#2701,1.);+#2701 = DIRECTION('',(0.,-1.));+#2702 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2703 = ADVANCED_FACE('',(#2704),#2692,.F.);+#2704 = FACE_BOUND('',#2705,.F.);+#2705 = EDGE_LOOP('',(#2706,#2707,#2730,#2758,#2786,#2814,#2842,#2870));+#2706 = ORIENTED_EDGE('',*,*,#2678,.T.);+#2707 = ORIENTED_EDGE('',*,*,#2708,.T.);+#2708 = EDGE_CURVE('',#2651,#2709,#2711,.T.);+#2709 = VERTEX_POINT('',#2710);+#2710 = CARTESIAN_POINT('',(-2.6375,1.125,0.15));+#2711 = SURFACE_CURVE('',#2712,(#2716,#2723),.PCURVE_S1.);+#2712 = LINE('',#2713,#2714);+#2713 = CARTESIAN_POINT('',(-2.35,1.125,0.595));+#2714 = VECTOR('',#2715,1.);+#2715 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#2716 = PCURVE('',#2692,#2717);+#2717 = DEFINITIONAL_REPRESENTATION('',(#2718),#2722);+#2718 = LINE('',#2719,#2720);+#2719 = CARTESIAN_POINT('',(-0.377057976796,0.284182274245));+#2720 = VECTOR('',#2721,1.);+#2721 = DIRECTION('',(0.839949759337,-0.542664170358));+#2722 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2723 = PCURVE('',#2666,#2724);+#2724 = DEFINITIONAL_REPRESENTATION('',(#2725),#2729);+#2725 = LINE('',#2726,#2727);+#2726 = CARTESIAN_POINT('',(0.,0.15));+#2727 = VECTOR('',#2728,1.);+#2728 = DIRECTION('',(1.,0.));+#2729 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2730 = ORIENTED_EDGE('',*,*,#2731,.T.);+#2731 = EDGE_CURVE('',#2709,#2732,#2734,.T.);+#2732 = VERTEX_POINT('',#2733);+#2733 = CARTESIAN_POINT('',(-3.205,1.125,0.15));+#2734 = SURFACE_CURVE('',#2735,(#2739,#2746),.PCURVE_S1.);+#2735 = LINE('',#2736,#2737);+#2736 = CARTESIAN_POINT('',(-2.6375,1.125,0.15));+#2737 = VECTOR('',#2738,1.);+#2738 = DIRECTION('',(-1.,0.,0.));+#2739 = PCURVE('',#2692,#2740);+#2740 = DEFINITIONAL_REPRESENTATION('',(#2741),#2745);+#2741 = LINE('',#2742,#2743);+#2742 = CARTESIAN_POINT('',(6.7942023204E-02,-3.317725755E-03));+#2743 = VECTOR('',#2744,1.);+#2744 = DIRECTION('',(0.,-1.));+#2745 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2746 = PCURVE('',#2747,#2752);+#2747 = PLANE('',#2748);+#2748 = AXIS2_PLACEMENT_3D('',#2749,#2750,#2751);+#2749 = CARTESIAN_POINT('',(-2.6375,0.975,0.15));+#2750 = DIRECTION('',(-0.,-0.,-1.));+#2751 = DIRECTION('',(-1.,0.,0.));+#2752 = DEFINITIONAL_REPRESENTATION('',(#2753),#2757);+#2753 = LINE('',#2754,#2755);+#2754 = CARTESIAN_POINT('',(0.,0.15));+#2755 = VECTOR('',#2756,1.);+#2756 = DIRECTION('',(1.,0.));+#2757 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2758 = ORIENTED_EDGE('',*,*,#2759,.T.);+#2759 = EDGE_CURVE('',#2732,#2760,#2762,.T.);+#2760 = VERTEX_POINT('',#2761);+#2761 = CARTESIAN_POINT('',(-3.205,1.125,0.));+#2762 = SURFACE_CURVE('',#2763,(#2767,#2774),.PCURVE_S1.);+#2763 = LINE('',#2764,#2765);+#2764 = CARTESIAN_POINT('',(-3.205,1.125,0.15));+#2765 = VECTOR('',#2766,1.);+#2766 = DIRECTION('',(0.,0.,-1.));+#2767 = PCURVE('',#2692,#2768);+#2768 = DEFINITIONAL_REPRESENTATION('',(#2769),#2773);+#2769 = LINE('',#2770,#2771);+#2770 = CARTESIAN_POINT('',(6.7942023204E-02,-0.570817725755));+#2771 = VECTOR('',#2772,1.);+#2772 = DIRECTION('',(1.,0.));+#2773 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2774 = PCURVE('',#2775,#2780);+#2775 = PLANE('',#2776);+#2776 = AXIS2_PLACEMENT_3D('',#2777,#2778,#2779);+#2777 = CARTESIAN_POINT('',(-3.205,0.975,0.15));+#2778 = DIRECTION('',(1.,0.,0.));+#2779 = DIRECTION('',(0.,0.,-1.));+#2780 = DEFINITIONAL_REPRESENTATION('',(#2781),#2785);+#2781 = LINE('',#2782,#2783);+#2782 = CARTESIAN_POINT('',(0.,0.15));+#2783 = VECTOR('',#2784,1.);+#2784 = DIRECTION('',(1.,0.));+#2785 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2786 = ORIENTED_EDGE('',*,*,#2787,.T.);+#2787 = EDGE_CURVE('',#2760,#2788,#2790,.T.);+#2788 = VERTEX_POINT('',#2789);+#2789 = CARTESIAN_POINT('',(-2.4875,1.125,0.));+#2790 = SURFACE_CURVE('',#2791,(#2795,#2802),.PCURVE_S1.);+#2791 = LINE('',#2792,#2793);+#2792 = CARTESIAN_POINT('',(-3.205,1.125,0.));+#2793 = VECTOR('',#2794,1.);+#2794 = DIRECTION('',(1.,0.,0.));+#2795 = PCURVE('',#2692,#2796);+#2796 = DEFINITIONAL_REPRESENTATION('',(#2797),#2801);+#2797 = LINE('',#2798,#2799);+#2798 = CARTESIAN_POINT('',(0.217942023204,-0.570817725755));+#2799 = VECTOR('',#2800,1.);+#2800 = DIRECTION('',(0.,1.));+#2801 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2802 = PCURVE('',#2803,#2808);+#2803 = PLANE('',#2804);+#2804 = AXIS2_PLACEMENT_3D('',#2805,#2806,#2807);+#2805 = CARTESIAN_POINT('',(-3.205,0.975,0.));+#2806 = DIRECTION('',(0.,0.,1.));+#2807 = DIRECTION('',(1.,0.,0.));+#2808 = DEFINITIONAL_REPRESENTATION('',(#2809),#2813);+#2809 = LINE('',#2810,#2811);+#2810 = CARTESIAN_POINT('',(0.,0.15));+#2811 = VECTOR('',#2812,1.);+#2812 = DIRECTION('',(1.,0.));+#2813 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2814 = ORIENTED_EDGE('',*,*,#2815,.T.);+#2815 = EDGE_CURVE('',#2788,#2816,#2818,.T.);+#2816 = VERTEX_POINT('',#2817);+#2817 = CARTESIAN_POINT('',(-2.2,1.125,0.445));+#2818 = SURFACE_CURVE('',#2819,(#2823,#2830),.PCURVE_S1.);+#2819 = LINE('',#2820,#2821);+#2820 = CARTESIAN_POINT('',(-2.4875,1.125,0.));+#2821 = VECTOR('',#2822,1.);+#2822 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#2823 = PCURVE('',#2692,#2824);+#2824 = DEFINITIONAL_REPRESENTATION('',(#2825),#2829);+#2825 = LINE('',#2826,#2827);+#2826 = CARTESIAN_POINT('',(0.217942023204,0.146682274245));+#2827 = VECTOR('',#2828,1.);+#2828 = DIRECTION('',(-0.839949759337,0.542664170358));+#2829 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2830 = PCURVE('',#2831,#2836);+#2831 = PLANE('',#2832);+#2832 = AXIS2_PLACEMENT_3D('',#2833,#2834,#2835);+#2833 = CARTESIAN_POINT('',(-2.4875,0.975,0.));+#2834 = DIRECTION('',(-0.839949759337,0.,0.542664170358));+#2835 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#2836 = DEFINITIONAL_REPRESENTATION('',(#2837),#2841);+#2837 = LINE('',#2838,#2839);+#2838 = CARTESIAN_POINT('',(0.,0.15));+#2839 = VECTOR('',#2840,1.);+#2840 = DIRECTION('',(1.,0.));+#2841 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2842 = ORIENTED_EDGE('',*,*,#2843,.T.);+#2843 = EDGE_CURVE('',#2816,#2844,#2846,.T.);+#2844 = VERTEX_POINT('',#2845);+#2845 = CARTESIAN_POINT('',(-2.15,1.125,0.445));+#2846 = SURFACE_CURVE('',#2847,(#2851,#2858),.PCURVE_S1.);+#2847 = LINE('',#2848,#2849);+#2848 = CARTESIAN_POINT('',(-2.2,1.125,0.445));+#2849 = VECTOR('',#2850,1.);+#2850 = DIRECTION('',(1.,0.,0.));+#2851 = PCURVE('',#2692,#2852);+#2852 = DEFINITIONAL_REPRESENTATION('',(#2853),#2857);+#2853 = LINE('',#2854,#2855);+#2854 = CARTESIAN_POINT('',(-0.227057976796,0.434182274245));+#2855 = VECTOR('',#2856,1.);+#2856 = DIRECTION('',(0.,1.));+#2857 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2858 = PCURVE('',#2859,#2864);+#2859 = PLANE('',#2860);+#2860 = AXIS2_PLACEMENT_3D('',#2861,#2862,#2863);+#2861 = CARTESIAN_POINT('',(-2.2,0.975,0.445));+#2862 = DIRECTION('',(0.,0.,1.));+#2863 = DIRECTION('',(1.,0.,0.));+#2864 = DEFINITIONAL_REPRESENTATION('',(#2865),#2869);+#2865 = LINE('',#2866,#2867);+#2866 = CARTESIAN_POINT('',(0.,0.15));+#2867 = VECTOR('',#2868,1.);+#2868 = DIRECTION('',(1.,0.));+#2869 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2870 = ORIENTED_EDGE('',*,*,#2871,.T.);+#2871 = EDGE_CURVE('',#2844,#2590,#2872,.T.);+#2872 = SURFACE_CURVE('',#2873,(#2877,#2884),.PCURVE_S1.);+#2873 = LINE('',#2874,#2875);+#2874 = CARTESIAN_POINT('',(-2.15,1.125,0.445));+#2875 = VECTOR('',#2876,1.);+#2876 = DIRECTION('',(0.,0.,1.));+#2877 = PCURVE('',#2692,#2878);+#2878 = DEFINITIONAL_REPRESENTATION('',(#2879),#2883);+#2879 = LINE('',#2880,#2881);+#2880 = CARTESIAN_POINT('',(-0.227057976796,0.484182274245));+#2881 = VECTOR('',#2882,1.);+#2882 = DIRECTION('',(-1.,0.));+#2883 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2884 = PCURVE('',#2610,#2885);+#2885 = DEFINITIONAL_REPRESENTATION('',(#2886),#2890);+#2886 = LINE('',#2887,#2888);+#2887 = CARTESIAN_POINT('',(0.,0.15));+#2888 = VECTOR('',#2889,1.);+#2889 = DIRECTION('',(1.,0.));+#2890 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2891 = ADVANCED_FACE('',(#2892),#2859,.F.);+#2892 = FACE_BOUND('',#2893,.F.);+#2893 = EDGE_LOOP('',(#2894,#2917,#2940,#2961));+#2894 = ORIENTED_EDGE('',*,*,#2895,.F.);+#2895 = EDGE_CURVE('',#2896,#2816,#2898,.T.);+#2896 = VERTEX_POINT('',#2897);+#2897 = CARTESIAN_POINT('',(-2.2,0.825,0.445));+#2898 = SURFACE_CURVE('',#2899,(#2903,#2910),.PCURVE_S1.);+#2899 = LINE('',#2900,#2901);+#2900 = CARTESIAN_POINT('',(-2.2,0.825,0.445));+#2901 = VECTOR('',#2902,1.);+#2902 = DIRECTION('',(0.,1.,0.));+#2903 = PCURVE('',#2859,#2904);+#2904 = DEFINITIONAL_REPRESENTATION('',(#2905),#2909);+#2905 = LINE('',#2906,#2907);+#2906 = CARTESIAN_POINT('',(0.,-0.15));+#2907 = VECTOR('',#2908,1.);+#2908 = DIRECTION('',(0.,1.));+#2909 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2910 = PCURVE('',#2831,#2911);+#2911 = DEFINITIONAL_REPRESENTATION('',(#2912),#2916);+#2912 = LINE('',#2913,#2914);+#2913 = CARTESIAN_POINT('',(0.529793591883,-0.15));+#2914 = VECTOR('',#2915,1.);+#2915 = DIRECTION('',(0.,1.));+#2916 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2917 = ORIENTED_EDGE('',*,*,#2918,.T.);+#2918 = EDGE_CURVE('',#2896,#2919,#2921,.T.);+#2919 = VERTEX_POINT('',#2920);+#2920 = CARTESIAN_POINT('',(-2.15,0.825,0.445));+#2921 = SURFACE_CURVE('',#2922,(#2926,#2933),.PCURVE_S1.);+#2922 = LINE('',#2923,#2924);+#2923 = CARTESIAN_POINT('',(-2.2,0.825,0.445));+#2924 = VECTOR('',#2925,1.);+#2925 = DIRECTION('',(1.,0.,0.));+#2926 = PCURVE('',#2859,#2927);+#2927 = DEFINITIONAL_REPRESENTATION('',(#2928),#2932);+#2928 = LINE('',#2929,#2930);+#2929 = CARTESIAN_POINT('',(0.,-0.15));+#2930 = VECTOR('',#2931,1.);+#2931 = DIRECTION('',(1.,0.));+#2932 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2933 = PCURVE('',#2638,#2934);+#2934 = DEFINITIONAL_REPRESENTATION('',(#2935),#2939);+#2935 = LINE('',#2936,#2937);+#2936 = CARTESIAN_POINT('',(-0.227057976796,0.434182274245));+#2937 = VECTOR('',#2938,1.);+#2938 = DIRECTION('',(0.,1.));+#2939 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2940 = ORIENTED_EDGE('',*,*,#2941,.T.);+#2941 = EDGE_CURVE('',#2919,#2844,#2942,.T.);+#2942 = SURFACE_CURVE('',#2943,(#2947,#2954),.PCURVE_S1.);+#2943 = LINE('',#2944,#2945);+#2944 = CARTESIAN_POINT('',(-2.15,0.825,0.445));+#2945 = VECTOR('',#2946,1.);+#2946 = DIRECTION('',(0.,1.,0.));+#2947 = PCURVE('',#2859,#2948);+#2948 = DEFINITIONAL_REPRESENTATION('',(#2949),#2953);+#2949 = LINE('',#2950,#2951);+#2950 = CARTESIAN_POINT('',(5.E-02,-0.15));+#2951 = VECTOR('',#2952,1.);+#2952 = DIRECTION('',(0.,1.));+#2953 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2954 = PCURVE('',#2610,#2955);+#2955 = DEFINITIONAL_REPRESENTATION('',(#2956),#2960);+#2956 = LINE('',#2957,#2958);+#2957 = CARTESIAN_POINT('',(0.,-0.15));+#2958 = VECTOR('',#2959,1.);+#2959 = DIRECTION('',(0.,1.));+#2960 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2961 = ORIENTED_EDGE('',*,*,#2843,.F.);+#2962 = ADVANCED_FACE('',(#2963),#2831,.F.);+#2963 = FACE_BOUND('',#2964,.F.);+#2964 = EDGE_LOOP('',(#2965,#2988,#2989,#2990));+#2965 = ORIENTED_EDGE('',*,*,#2966,.T.);+#2966 = EDGE_CURVE('',#2967,#2896,#2969,.T.);+#2967 = VERTEX_POINT('',#2968);+#2968 = CARTESIAN_POINT('',(-2.4875,0.825,0.));+#2969 = SURFACE_CURVE('',#2970,(#2974,#2981),.PCURVE_S1.);+#2970 = LINE('',#2971,#2972);+#2971 = CARTESIAN_POINT('',(-2.4875,0.825,0.));+#2972 = VECTOR('',#2973,1.);+#2973 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#2974 = PCURVE('',#2831,#2975);+#2975 = DEFINITIONAL_REPRESENTATION('',(#2976),#2980);+#2976 = LINE('',#2977,#2978);+#2977 = CARTESIAN_POINT('',(0.,-0.15));+#2978 = VECTOR('',#2979,1.);+#2979 = DIRECTION('',(1.,0.));+#2980 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2981 = PCURVE('',#2638,#2982);+#2982 = DEFINITIONAL_REPRESENTATION('',(#2983),#2987);+#2983 = LINE('',#2984,#2985);+#2984 = CARTESIAN_POINT('',(0.217942023204,0.146682274245));+#2985 = VECTOR('',#2986,1.);+#2986 = DIRECTION('',(-0.839949759337,0.542664170358));+#2987 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2988 = ORIENTED_EDGE('',*,*,#2895,.T.);+#2989 = ORIENTED_EDGE('',*,*,#2815,.F.);+#2990 = ORIENTED_EDGE('',*,*,#2991,.T.);+#2991 = EDGE_CURVE('',#2788,#2967,#2992,.T.);+#2992 = SURFACE_CURVE('',#2993,(#2997,#3004),.PCURVE_S1.);+#2993 = LINE('',#2994,#2995);+#2994 = CARTESIAN_POINT('',(-2.4875,1.125,0.));+#2995 = VECTOR('',#2996,1.);+#2996 = DIRECTION('',(0.,-1.,0.));+#2997 = PCURVE('',#2831,#2998);+#2998 = DEFINITIONAL_REPRESENTATION('',(#2999),#3003);+#2999 = LINE('',#3000,#3001);+#3000 = CARTESIAN_POINT('',(0.,0.15));+#3001 = VECTOR('',#3002,1.);+#3002 = DIRECTION('',(0.,-1.));+#3003 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3004 = PCURVE('',#2803,#3005);+#3005 = DEFINITIONAL_REPRESENTATION('',(#3006),#3010);+#3006 = LINE('',#3007,#3008);+#3007 = CARTESIAN_POINT('',(0.7175,0.15));+#3008 = VECTOR('',#3009,1.);+#3009 = DIRECTION('',(0.,-1.));+#3010 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3011 = ADVANCED_FACE('',(#3012),#2803,.F.);+#3012 = FACE_BOUND('',#3013,.F.);+#3013 = EDGE_LOOP('',(#3014,#3037,#3038,#3039));+#3014 = ORIENTED_EDGE('',*,*,#3015,.T.);+#3015 = EDGE_CURVE('',#3016,#2967,#3018,.T.);+#3016 = VERTEX_POINT('',#3017);+#3017 = CARTESIAN_POINT('',(-3.205,0.825,0.));+#3018 = SURFACE_CURVE('',#3019,(#3023,#3030),.PCURVE_S1.);+#3019 = LINE('',#3020,#3021);+#3020 = CARTESIAN_POINT('',(-3.205,0.825,0.));+#3021 = VECTOR('',#3022,1.);+#3022 = DIRECTION('',(1.,0.,0.));+#3023 = PCURVE('',#2803,#3024);+#3024 = DEFINITIONAL_REPRESENTATION('',(#3025),#3029);+#3025 = LINE('',#3026,#3027);+#3026 = CARTESIAN_POINT('',(0.,-0.15));+#3027 = VECTOR('',#3028,1.);+#3028 = DIRECTION('',(1.,0.));+#3029 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3030 = PCURVE('',#2638,#3031);+#3031 = DEFINITIONAL_REPRESENTATION('',(#3032),#3036);+#3032 = LINE('',#3033,#3034);+#3033 = CARTESIAN_POINT('',(0.217942023204,-0.570817725755));+#3034 = VECTOR('',#3035,1.);+#3035 = DIRECTION('',(0.,1.));+#3036 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3037 = ORIENTED_EDGE('',*,*,#2991,.F.);+#3038 = ORIENTED_EDGE('',*,*,#2787,.F.);+#3039 = ORIENTED_EDGE('',*,*,#3040,.T.);+#3040 = EDGE_CURVE('',#2760,#3016,#3041,.T.);+#3041 = SURFACE_CURVE('',#3042,(#3046,#3053),.PCURVE_S1.);+#3042 = LINE('',#3043,#3044);+#3043 = CARTESIAN_POINT('',(-3.205,1.125,0.));+#3044 = VECTOR('',#3045,1.);+#3045 = DIRECTION('',(0.,-1.,0.));+#3046 = PCURVE('',#2803,#3047);+#3047 = DEFINITIONAL_REPRESENTATION('',(#3048),#3052);+#3048 = LINE('',#3049,#3050);+#3049 = CARTESIAN_POINT('',(0.,0.15));+#3050 = VECTOR('',#3051,1.);+#3051 = DIRECTION('',(0.,-1.));+#3052 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3053 = PCURVE('',#2775,#3054);+#3054 = DEFINITIONAL_REPRESENTATION('',(#3055),#3059);+#3055 = LINE('',#3056,#3057);+#3056 = CARTESIAN_POINT('',(0.15,0.15));+#3057 = VECTOR('',#3058,1.);+#3058 = DIRECTION('',(0.,-1.));+#3059 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3060 = ADVANCED_FACE('',(#3061),#2775,.F.);+#3061 = FACE_BOUND('',#3062,.F.);+#3062 = EDGE_LOOP('',(#3063,#3086,#3087,#3088));+#3063 = ORIENTED_EDGE('',*,*,#3064,.T.);+#3064 = EDGE_CURVE('',#3065,#3016,#3067,.T.);+#3065 = VERTEX_POINT('',#3066);+#3066 = CARTESIAN_POINT('',(-3.205,0.825,0.15));+#3067 = SURFACE_CURVE('',#3068,(#3072,#3079),.PCURVE_S1.);+#3068 = LINE('',#3069,#3070);+#3069 = CARTESIAN_POINT('',(-3.205,0.825,0.15));+#3070 = VECTOR('',#3071,1.);+#3071 = DIRECTION('',(0.,0.,-1.));+#3072 = PCURVE('',#2775,#3073);+#3073 = DEFINITIONAL_REPRESENTATION('',(#3074),#3078);+#3074 = LINE('',#3075,#3076);+#3075 = CARTESIAN_POINT('',(0.,-0.15));+#3076 = VECTOR('',#3077,1.);+#3077 = DIRECTION('',(1.,0.));+#3078 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3079 = PCURVE('',#2638,#3080);+#3080 = DEFINITIONAL_REPRESENTATION('',(#3081),#3085);+#3081 = LINE('',#3082,#3083);+#3082 = CARTESIAN_POINT('',(6.7942023204E-02,-0.570817725755));+#3083 = VECTOR('',#3084,1.);+#3084 = DIRECTION('',(1.,0.));+#3085 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3086 = ORIENTED_EDGE('',*,*,#3040,.F.);+#3087 = ORIENTED_EDGE('',*,*,#2759,.F.);+#3088 = ORIENTED_EDGE('',*,*,#3089,.T.);+#3089 = EDGE_CURVE('',#2732,#3065,#3090,.T.);+#3090 = SURFACE_CURVE('',#3091,(#3095,#3102),.PCURVE_S1.);+#3091 = LINE('',#3092,#3093);+#3092 = CARTESIAN_POINT('',(-3.205,1.125,0.15));+#3093 = VECTOR('',#3094,1.);+#3094 = DIRECTION('',(0.,-1.,0.));+#3095 = PCURVE('',#2775,#3096);+#3096 = DEFINITIONAL_REPRESENTATION('',(#3097),#3101);+#3097 = LINE('',#3098,#3099);+#3098 = CARTESIAN_POINT('',(0.,0.15));+#3099 = VECTOR('',#3100,1.);+#3100 = DIRECTION('',(0.,-1.));+#3101 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3102 = PCURVE('',#2747,#3103);+#3103 = DEFINITIONAL_REPRESENTATION('',(#3104),#3108);+#3104 = LINE('',#3105,#3106);+#3105 = CARTESIAN_POINT('',(0.5675,0.15));+#3106 = VECTOR('',#3107,1.);+#3107 = DIRECTION('',(0.,-1.));+#3108 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3109 = ADVANCED_FACE('',(#3110),#2747,.F.);+#3110 = FACE_BOUND('',#3111,.F.);+#3111 = EDGE_LOOP('',(#3112,#3135,#3136,#3137));+#3112 = ORIENTED_EDGE('',*,*,#3113,.T.);+#3113 = EDGE_CURVE('',#3114,#3065,#3116,.T.);+#3114 = VERTEX_POINT('',#3115);+#3115 = CARTESIAN_POINT('',(-2.6375,0.825,0.15));+#3116 = SURFACE_CURVE('',#3117,(#3121,#3128),.PCURVE_S1.);+#3117 = LINE('',#3118,#3119);+#3118 = CARTESIAN_POINT('',(-2.6375,0.825,0.15));+#3119 = VECTOR('',#3120,1.);+#3120 = DIRECTION('',(-1.,0.,0.));+#3121 = PCURVE('',#2747,#3122);+#3122 = DEFINITIONAL_REPRESENTATION('',(#3123),#3127);+#3123 = LINE('',#3124,#3125);+#3124 = CARTESIAN_POINT('',(0.,-0.15));+#3125 = VECTOR('',#3126,1.);+#3126 = DIRECTION('',(1.,0.));+#3127 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3128 = PCURVE('',#2638,#3129);+#3129 = DEFINITIONAL_REPRESENTATION('',(#3130),#3134);+#3130 = LINE('',#3131,#3132);+#3131 = CARTESIAN_POINT('',(6.7942023204E-02,-3.317725755E-03));+#3132 = VECTOR('',#3133,1.);+#3133 = DIRECTION('',(0.,-1.));+#3134 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3135 = ORIENTED_EDGE('',*,*,#3089,.F.);+#3136 = ORIENTED_EDGE('',*,*,#2731,.F.);+#3137 = ORIENTED_EDGE('',*,*,#3138,.T.);+#3138 = EDGE_CURVE('',#2709,#3114,#3139,.T.);+#3139 = SURFACE_CURVE('',#3140,(#3144,#3151),.PCURVE_S1.);+#3140 = LINE('',#3141,#3142);+#3141 = CARTESIAN_POINT('',(-2.6375,1.125,0.15));+#3142 = VECTOR('',#3143,1.);+#3143 = DIRECTION('',(0.,-1.,0.));+#3144 = PCURVE('',#2747,#3145);+#3145 = DEFINITIONAL_REPRESENTATION('',(#3146),#3150);+#3146 = LINE('',#3147,#3148);+#3147 = CARTESIAN_POINT('',(0.,0.15));+#3148 = VECTOR('',#3149,1.);+#3149 = DIRECTION('',(0.,-1.));+#3150 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3151 = PCURVE('',#2666,#3152);+#3152 = DEFINITIONAL_REPRESENTATION('',(#3153),#3157);+#3153 = LINE('',#3154,#3155);+#3154 = CARTESIAN_POINT('',(0.529793591883,0.15));+#3155 = VECTOR('',#3156,1.);+#3156 = DIRECTION('',(-0.,-1.));+#3157 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3158 = ADVANCED_FACE('',(#3159),#2666,.F.);+#3159 = FACE_BOUND('',#3160,.F.);+#3160 = EDGE_LOOP('',(#3161,#3182,#3183,#3184));+#3161 = ORIENTED_EDGE('',*,*,#3162,.T.);+#3162 = EDGE_CURVE('',#2623,#3114,#3163,.T.);+#3163 = SURFACE_CURVE('',#3164,(#3168,#3175),.PCURVE_S1.);+#3164 = LINE('',#3165,#3166);+#3165 = CARTESIAN_POINT('',(-2.35,0.825,0.595));+#3166 = VECTOR('',#3167,1.);+#3167 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#3168 = PCURVE('',#2666,#3169);+#3169 = DEFINITIONAL_REPRESENTATION('',(#3170),#3174);+#3170 = LINE('',#3171,#3172);+#3171 = CARTESIAN_POINT('',(-0.,-0.15));+#3172 = VECTOR('',#3173,1.);+#3173 = DIRECTION('',(1.,0.));+#3174 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3175 = PCURVE('',#2638,#3176);+#3176 = DEFINITIONAL_REPRESENTATION('',(#3177),#3181);+#3177 = LINE('',#3178,#3179);+#3178 = CARTESIAN_POINT('',(-0.377057976796,0.284182274245));+#3179 = VECTOR('',#3180,1.);+#3180 = DIRECTION('',(0.839949759337,-0.542664170358));+#3181 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3182 = ORIENTED_EDGE('',*,*,#3138,.F.);+#3183 = ORIENTED_EDGE('',*,*,#2708,.F.);+#3184 = ORIENTED_EDGE('',*,*,#2650,.T.);+#3185 = ADVANCED_FACE('',(#3186),#2638,.T.);+#3186 = FACE_BOUND('',#3187,.T.);+#3187 = EDGE_LOOP('',(#3188,#3189,#3190,#3191,#3192,#3193,#3194,#3195));+#3188 = ORIENTED_EDGE('',*,*,#2622,.T.);+#3189 = ORIENTED_EDGE('',*,*,#3162,.T.);+#3190 = ORIENTED_EDGE('',*,*,#3113,.T.);+#3191 = ORIENTED_EDGE('',*,*,#3064,.T.);+#3192 = ORIENTED_EDGE('',*,*,#3015,.T.);+#3193 = ORIENTED_EDGE('',*,*,#2966,.T.);+#3194 = ORIENTED_EDGE('',*,*,#2918,.T.);+#3195 = ORIENTED_EDGE('',*,*,#3196,.T.);+#3196 = EDGE_CURVE('',#2919,#2588,#3197,.T.);+#3197 = SURFACE_CURVE('',#3198,(#3202,#3209),.PCURVE_S1.);+#3198 = LINE('',#3199,#3200);+#3199 = CARTESIAN_POINT('',(-2.15,0.825,0.445));+#3200 = VECTOR('',#3201,1.);+#3201 = DIRECTION('',(0.,0.,1.));+#3202 = PCURVE('',#2638,#3203);+#3203 = DEFINITIONAL_REPRESENTATION('',(#3204),#3208);+#3204 = LINE('',#3205,#3206);+#3205 = CARTESIAN_POINT('',(-0.227057976796,0.484182274245));+#3206 = VECTOR('',#3207,1.);+#3207 = DIRECTION('',(-1.,0.));+#3208 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3209 = PCURVE('',#2610,#3210);+#3210 = DEFINITIONAL_REPRESENTATION('',(#3211),#3215);+#3211 = LINE('',#3212,#3213);+#3212 = CARTESIAN_POINT('',(0.,-0.15));+#3213 = VECTOR('',#3214,1.);+#3214 = DIRECTION('',(1.,0.));+#3215 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3216 = ADVANCED_FACE('',(#3217),#2610,.F.);+#3217 = FACE_BOUND('',#3218,.F.);+#3218 = EDGE_LOOP('',(#3219,#3220,#3221,#3222));+#3219 = ORIENTED_EDGE('',*,*,#2941,.F.);+#3220 = ORIENTED_EDGE('',*,*,#3196,.T.);+#3221 = ORIENTED_EDGE('',*,*,#2587,.T.);+#3222 = ORIENTED_EDGE('',*,*,#2871,.F.);+#3223 = MANIFOLD_SOLID_BREP('',#3224);+#3224 = CLOSED_SHELL('',(#3225,#3345,#3533,#3604,#3653,#3702,#3751,#3800+ ,#3827,#3858));+#3225 = ADVANCED_FACE('',(#3226),#3240,.F.);+#3226 = FACE_BOUND('',#3227,.F.);+#3227 = EDGE_LOOP('',(#3228,#3263,#3291,#3319));+#3228 = ORIENTED_EDGE('',*,*,#3229,.F.);+#3229 = EDGE_CURVE('',#3230,#3232,#3234,.T.);+#3230 = VERTEX_POINT('',#3231);+#3231 = CARTESIAN_POINT('',(-2.15,0.175,0.595));+#3232 = VERTEX_POINT('',#3233);+#3233 = CARTESIAN_POINT('',(-2.15,0.475,0.595));+#3234 = SURFACE_CURVE('',#3235,(#3239,#3251),.PCURVE_S1.);+#3235 = LINE('',#3236,#3237);+#3236 = CARTESIAN_POINT('',(-2.15,0.175,0.595));+#3237 = VECTOR('',#3238,1.);+#3238 = DIRECTION('',(0.,1.,0.));+#3239 = PCURVE('',#3240,#3245);+#3240 = PLANE('',#3241);+#3241 = AXIS2_PLACEMENT_3D('',#3242,#3243,#3244);+#3242 = CARTESIAN_POINT('',(-2.15,0.325,0.595));+#3243 = DIRECTION('',(-0.,-0.,-1.));+#3244 = DIRECTION('',(-1.,0.,0.));+#3245 = DEFINITIONAL_REPRESENTATION('',(#3246),#3250);+#3246 = LINE('',#3247,#3248);+#3247 = CARTESIAN_POINT('',(0.,-0.15));+#3248 = VECTOR('',#3249,1.);+#3249 = DIRECTION('',(0.,1.));+#3250 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3251 = PCURVE('',#3252,#3257);+#3252 = PLANE('',#3253);+#3253 = AXIS2_PLACEMENT_3D('',#3254,#3255,#3256);+#3254 = CARTESIAN_POINT('',(-2.15,0.325,0.445));+#3255 = DIRECTION('',(-1.,0.,0.));+#3256 = DIRECTION('',(0.,0.,1.));+#3257 = DEFINITIONAL_REPRESENTATION('',(#3258),#3262);+#3258 = LINE('',#3259,#3260);+#3259 = CARTESIAN_POINT('',(0.15,-0.15));+#3260 = VECTOR('',#3261,1.);+#3261 = DIRECTION('',(0.,1.));+#3262 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3263 = ORIENTED_EDGE('',*,*,#3264,.T.);+#3264 = EDGE_CURVE('',#3230,#3265,#3267,.T.);+#3265 = VERTEX_POINT('',#3266);+#3266 = CARTESIAN_POINT('',(-2.35,0.175,0.595));+#3267 = SURFACE_CURVE('',#3268,(#3272,#3279),.PCURVE_S1.);+#3268 = LINE('',#3269,#3270);+#3269 = CARTESIAN_POINT('',(-2.15,0.175,0.595));+#3270 = VECTOR('',#3271,1.);+#3271 = DIRECTION('',(-1.,0.,0.));+#3272 = PCURVE('',#3240,#3273);+#3273 = DEFINITIONAL_REPRESENTATION('',(#3274),#3278);+#3274 = LINE('',#3275,#3276);+#3275 = CARTESIAN_POINT('',(0.,-0.15));+#3276 = VECTOR('',#3277,1.);+#3277 = DIRECTION('',(1.,0.));+#3278 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3279 = PCURVE('',#3280,#3285);+#3280 = PLANE('',#3281);+#3281 = AXIS2_PLACEMENT_3D('',#3282,#3283,#3284);+#3282 = CARTESIAN_POINT('',(-2.634182274245,0.175,0.217942023204));+#3283 = DIRECTION('',(-0.,-1.,-0.));+#3284 = DIRECTION('',(0.,0.,-1.));+#3285 = DEFINITIONAL_REPRESENTATION('',(#3286),#3290);+#3286 = LINE('',#3287,#3288);+#3287 = CARTESIAN_POINT('',(-0.377057976796,0.484182274245));+#3288 = VECTOR('',#3289,1.);+#3289 = DIRECTION('',(0.,-1.));+#3290 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3291 = ORIENTED_EDGE('',*,*,#3292,.F.);+#3292 = EDGE_CURVE('',#3293,#3265,#3295,.T.);+#3293 = VERTEX_POINT('',#3294);+#3294 = CARTESIAN_POINT('',(-2.35,0.475,0.595));+#3295 = SURFACE_CURVE('',#3296,(#3300,#3307),.PCURVE_S1.);+#3296 = LINE('',#3297,#3298);+#3297 = CARTESIAN_POINT('',(-2.35,0.475,0.595));+#3298 = VECTOR('',#3299,1.);+#3299 = DIRECTION('',(0.,-1.,0.));+#3300 = PCURVE('',#3240,#3301);+#3301 = DEFINITIONAL_REPRESENTATION('',(#3302),#3306);+#3302 = LINE('',#3303,#3304);+#3303 = CARTESIAN_POINT('',(0.2,0.15));+#3304 = VECTOR('',#3305,1.);+#3305 = DIRECTION('',(0.,-1.));+#3306 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3307 = PCURVE('',#3308,#3313);+#3308 = PLANE('',#3309);+#3309 = AXIS2_PLACEMENT_3D('',#3310,#3311,#3312);+#3310 = CARTESIAN_POINT('',(-2.35,0.325,0.595));+#3311 = DIRECTION('',(0.839949759337,0.,-0.542664170358));+#3312 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#3313 = DEFINITIONAL_REPRESENTATION('',(#3314),#3318);+#3314 = LINE('',#3315,#3316);+#3315 = CARTESIAN_POINT('',(0.,0.15));+#3316 = VECTOR('',#3317,1.);+#3317 = DIRECTION('',(-0.,-1.));+#3318 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3319 = ORIENTED_EDGE('',*,*,#3320,.F.);+#3320 = EDGE_CURVE('',#3232,#3293,#3321,.T.);+#3321 = SURFACE_CURVE('',#3322,(#3326,#3333),.PCURVE_S1.);+#3322 = LINE('',#3323,#3324);+#3323 = CARTESIAN_POINT('',(-2.15,0.475,0.595));+#3324 = VECTOR('',#3325,1.);+#3325 = DIRECTION('',(-1.,0.,0.));+#3326 = PCURVE('',#3240,#3327);+#3327 = DEFINITIONAL_REPRESENTATION('',(#3328),#3332);+#3328 = LINE('',#3329,#3330);+#3329 = CARTESIAN_POINT('',(0.,0.15));+#3330 = VECTOR('',#3331,1.);+#3331 = DIRECTION('',(1.,0.));+#3332 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3333 = PCURVE('',#3334,#3339);+#3334 = PLANE('',#3335);+#3335 = AXIS2_PLACEMENT_3D('',#3336,#3337,#3338);+#3336 = CARTESIAN_POINT('',(-2.634182274245,0.475,0.217942023204));+#3337 = DIRECTION('',(-0.,-1.,-0.));+#3338 = DIRECTION('',(0.,0.,-1.));+#3339 = DEFINITIONAL_REPRESENTATION('',(#3340),#3344);+#3340 = LINE('',#3341,#3342);+#3341 = CARTESIAN_POINT('',(-0.377057976796,0.484182274245));+#3342 = VECTOR('',#3343,1.);+#3343 = DIRECTION('',(0.,-1.));+#3344 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3345 = ADVANCED_FACE('',(#3346),#3334,.F.);+#3346 = FACE_BOUND('',#3347,.F.);+#3347 = EDGE_LOOP('',(#3348,#3349,#3372,#3400,#3428,#3456,#3484,#3512));+#3348 = ORIENTED_EDGE('',*,*,#3320,.T.);+#3349 = ORIENTED_EDGE('',*,*,#3350,.T.);+#3350 = EDGE_CURVE('',#3293,#3351,#3353,.T.);+#3351 = VERTEX_POINT('',#3352);+#3352 = CARTESIAN_POINT('',(-2.6375,0.475,0.15));+#3353 = SURFACE_CURVE('',#3354,(#3358,#3365),.PCURVE_S1.);+#3354 = LINE('',#3355,#3356);+#3355 = CARTESIAN_POINT('',(-2.35,0.475,0.595));+#3356 = VECTOR('',#3357,1.);+#3357 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#3358 = PCURVE('',#3334,#3359);+#3359 = DEFINITIONAL_REPRESENTATION('',(#3360),#3364);+#3360 = LINE('',#3361,#3362);+#3361 = CARTESIAN_POINT('',(-0.377057976796,0.284182274245));+#3362 = VECTOR('',#3363,1.);+#3363 = DIRECTION('',(0.839949759337,-0.542664170358));+#3364 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3365 = PCURVE('',#3308,#3366);+#3366 = DEFINITIONAL_REPRESENTATION('',(#3367),#3371);+#3367 = LINE('',#3368,#3369);+#3368 = CARTESIAN_POINT('',(0.,0.15));+#3369 = VECTOR('',#3370,1.);+#3370 = DIRECTION('',(1.,0.));+#3371 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3372 = ORIENTED_EDGE('',*,*,#3373,.T.);+#3373 = EDGE_CURVE('',#3351,#3374,#3376,.T.);+#3374 = VERTEX_POINT('',#3375);+#3375 = CARTESIAN_POINT('',(-3.205,0.475,0.15));+#3376 = SURFACE_CURVE('',#3377,(#3381,#3388),.PCURVE_S1.);+#3377 = LINE('',#3378,#3379);+#3378 = CARTESIAN_POINT('',(-2.6375,0.475,0.15));+#3379 = VECTOR('',#3380,1.);+#3380 = DIRECTION('',(-1.,0.,0.));+#3381 = PCURVE('',#3334,#3382);+#3382 = DEFINITIONAL_REPRESENTATION('',(#3383),#3387);+#3383 = LINE('',#3384,#3385);+#3384 = CARTESIAN_POINT('',(6.7942023204E-02,-3.317725755E-03));+#3385 = VECTOR('',#3386,1.);+#3386 = DIRECTION('',(0.,-1.));+#3387 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3388 = PCURVE('',#3389,#3394);+#3389 = PLANE('',#3390);+#3390 = AXIS2_PLACEMENT_3D('',#3391,#3392,#3393);+#3391 = CARTESIAN_POINT('',(-2.6375,0.325,0.15));+#3392 = DIRECTION('',(-0.,-0.,-1.));+#3393 = DIRECTION('',(-1.,0.,0.));+#3394 = DEFINITIONAL_REPRESENTATION('',(#3395),#3399);+#3395 = LINE('',#3396,#3397);+#3396 = CARTESIAN_POINT('',(0.,0.15));+#3397 = VECTOR('',#3398,1.);+#3398 = DIRECTION('',(1.,0.));+#3399 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3400 = ORIENTED_EDGE('',*,*,#3401,.T.);+#3401 = EDGE_CURVE('',#3374,#3402,#3404,.T.);+#3402 = VERTEX_POINT('',#3403);+#3403 = CARTESIAN_POINT('',(-3.205,0.475,0.));+#3404 = SURFACE_CURVE('',#3405,(#3409,#3416),.PCURVE_S1.);+#3405 = LINE('',#3406,#3407);+#3406 = CARTESIAN_POINT('',(-3.205,0.475,0.15));+#3407 = VECTOR('',#3408,1.);+#3408 = DIRECTION('',(0.,0.,-1.));+#3409 = PCURVE('',#3334,#3410);+#3410 = DEFINITIONAL_REPRESENTATION('',(#3411),#3415);+#3411 = LINE('',#3412,#3413);+#3412 = CARTESIAN_POINT('',(6.7942023204E-02,-0.570817725755));+#3413 = VECTOR('',#3414,1.);+#3414 = DIRECTION('',(1.,0.));+#3415 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3416 = PCURVE('',#3417,#3422);+#3417 = PLANE('',#3418);+#3418 = AXIS2_PLACEMENT_3D('',#3419,#3420,#3421);+#3419 = CARTESIAN_POINT('',(-3.205,0.325,0.15));+#3420 = DIRECTION('',(1.,0.,0.));+#3421 = DIRECTION('',(0.,0.,-1.));+#3422 = DEFINITIONAL_REPRESENTATION('',(#3423),#3427);+#3423 = LINE('',#3424,#3425);+#3424 = CARTESIAN_POINT('',(0.,0.15));+#3425 = VECTOR('',#3426,1.);+#3426 = DIRECTION('',(1.,0.));+#3427 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3428 = ORIENTED_EDGE('',*,*,#3429,.T.);+#3429 = EDGE_CURVE('',#3402,#3430,#3432,.T.);+#3430 = VERTEX_POINT('',#3431);+#3431 = CARTESIAN_POINT('',(-2.4875,0.475,0.));+#3432 = SURFACE_CURVE('',#3433,(#3437,#3444),.PCURVE_S1.);+#3433 = LINE('',#3434,#3435);+#3434 = CARTESIAN_POINT('',(-3.205,0.475,0.));+#3435 = VECTOR('',#3436,1.);+#3436 = DIRECTION('',(1.,0.,0.));+#3437 = PCURVE('',#3334,#3438);+#3438 = DEFINITIONAL_REPRESENTATION('',(#3439),#3443);+#3439 = LINE('',#3440,#3441);+#3440 = CARTESIAN_POINT('',(0.217942023204,-0.570817725755));+#3441 = VECTOR('',#3442,1.);+#3442 = DIRECTION('',(0.,1.));+#3443 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3444 = PCURVE('',#3445,#3450);+#3445 = PLANE('',#3446);+#3446 = AXIS2_PLACEMENT_3D('',#3447,#3448,#3449);+#3447 = CARTESIAN_POINT('',(-3.205,0.325,0.));+#3448 = DIRECTION('',(0.,0.,1.));+#3449 = DIRECTION('',(1.,0.,0.));+#3450 = DEFINITIONAL_REPRESENTATION('',(#3451),#3455);+#3451 = LINE('',#3452,#3453);+#3452 = CARTESIAN_POINT('',(0.,0.15));+#3453 = VECTOR('',#3454,1.);+#3454 = DIRECTION('',(1.,0.));+#3455 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3456 = ORIENTED_EDGE('',*,*,#3457,.T.);+#3457 = EDGE_CURVE('',#3430,#3458,#3460,.T.);+#3458 = VERTEX_POINT('',#3459);+#3459 = CARTESIAN_POINT('',(-2.2,0.475,0.445));+#3460 = SURFACE_CURVE('',#3461,(#3465,#3472),.PCURVE_S1.);+#3461 = LINE('',#3462,#3463);+#3462 = CARTESIAN_POINT('',(-2.4875,0.475,0.));+#3463 = VECTOR('',#3464,1.);+#3464 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#3465 = PCURVE('',#3334,#3466);+#3466 = DEFINITIONAL_REPRESENTATION('',(#3467),#3471);+#3467 = LINE('',#3468,#3469);+#3468 = CARTESIAN_POINT('',(0.217942023204,0.146682274245));+#3469 = VECTOR('',#3470,1.);+#3470 = DIRECTION('',(-0.839949759337,0.542664170358));+#3471 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3472 = PCURVE('',#3473,#3478);+#3473 = PLANE('',#3474);+#3474 = AXIS2_PLACEMENT_3D('',#3475,#3476,#3477);+#3475 = CARTESIAN_POINT('',(-2.4875,0.325,0.));+#3476 = DIRECTION('',(-0.839949759337,0.,0.542664170358));+#3477 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#3478 = DEFINITIONAL_REPRESENTATION('',(#3479),#3483);+#3479 = LINE('',#3480,#3481);+#3480 = CARTESIAN_POINT('',(0.,0.15));+#3481 = VECTOR('',#3482,1.);+#3482 = DIRECTION('',(1.,0.));+#3483 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3484 = ORIENTED_EDGE('',*,*,#3485,.T.);+#3485 = EDGE_CURVE('',#3458,#3486,#3488,.T.);+#3486 = VERTEX_POINT('',#3487);+#3487 = CARTESIAN_POINT('',(-2.15,0.475,0.445));+#3488 = SURFACE_CURVE('',#3489,(#3493,#3500),.PCURVE_S1.);+#3489 = LINE('',#3490,#3491);+#3490 = CARTESIAN_POINT('',(-2.2,0.475,0.445));+#3491 = VECTOR('',#3492,1.);+#3492 = DIRECTION('',(1.,0.,0.));+#3493 = PCURVE('',#3334,#3494);+#3494 = DEFINITIONAL_REPRESENTATION('',(#3495),#3499);+#3495 = LINE('',#3496,#3497);+#3496 = CARTESIAN_POINT('',(-0.227057976796,0.434182274245));+#3497 = VECTOR('',#3498,1.);+#3498 = DIRECTION('',(0.,1.));+#3499 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3500 = PCURVE('',#3501,#3506);+#3501 = PLANE('',#3502);+#3502 = AXIS2_PLACEMENT_3D('',#3503,#3504,#3505);+#3503 = CARTESIAN_POINT('',(-2.2,0.325,0.445));+#3504 = DIRECTION('',(0.,0.,1.));+#3505 = DIRECTION('',(1.,0.,0.));+#3506 = DEFINITIONAL_REPRESENTATION('',(#3507),#3511);+#3507 = LINE('',#3508,#3509);+#3508 = CARTESIAN_POINT('',(0.,0.15));+#3509 = VECTOR('',#3510,1.);+#3510 = DIRECTION('',(1.,0.));+#3511 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3512 = ORIENTED_EDGE('',*,*,#3513,.T.);+#3513 = EDGE_CURVE('',#3486,#3232,#3514,.T.);+#3514 = SURFACE_CURVE('',#3515,(#3519,#3526),.PCURVE_S1.);+#3515 = LINE('',#3516,#3517);+#3516 = CARTESIAN_POINT('',(-2.15,0.475,0.445));+#3517 = VECTOR('',#3518,1.);+#3518 = DIRECTION('',(0.,0.,1.));+#3519 = PCURVE('',#3334,#3520);+#3520 = DEFINITIONAL_REPRESENTATION('',(#3521),#3525);+#3521 = LINE('',#3522,#3523);+#3522 = CARTESIAN_POINT('',(-0.227057976796,0.484182274245));+#3523 = VECTOR('',#3524,1.);+#3524 = DIRECTION('',(-1.,0.));+#3525 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3526 = PCURVE('',#3252,#3527);+#3527 = DEFINITIONAL_REPRESENTATION('',(#3528),#3532);+#3528 = LINE('',#3529,#3530);+#3529 = CARTESIAN_POINT('',(0.,0.15));+#3530 = VECTOR('',#3531,1.);+#3531 = DIRECTION('',(1.,0.));+#3532 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3533 = ADVANCED_FACE('',(#3534),#3501,.F.);+#3534 = FACE_BOUND('',#3535,.F.);+#3535 = EDGE_LOOP('',(#3536,#3559,#3582,#3603));+#3536 = ORIENTED_EDGE('',*,*,#3537,.F.);+#3537 = EDGE_CURVE('',#3538,#3458,#3540,.T.);+#3538 = VERTEX_POINT('',#3539);+#3539 = CARTESIAN_POINT('',(-2.2,0.175,0.445));+#3540 = SURFACE_CURVE('',#3541,(#3545,#3552),.PCURVE_S1.);+#3541 = LINE('',#3542,#3543);+#3542 = CARTESIAN_POINT('',(-2.2,0.175,0.445));+#3543 = VECTOR('',#3544,1.);+#3544 = DIRECTION('',(0.,1.,0.));+#3545 = PCURVE('',#3501,#3546);+#3546 = DEFINITIONAL_REPRESENTATION('',(#3547),#3551);+#3547 = LINE('',#3548,#3549);+#3548 = CARTESIAN_POINT('',(0.,-0.15));+#3549 = VECTOR('',#3550,1.);+#3550 = DIRECTION('',(0.,1.));+#3551 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3552 = PCURVE('',#3473,#3553);+#3553 = DEFINITIONAL_REPRESENTATION('',(#3554),#3558);+#3554 = LINE('',#3555,#3556);+#3555 = CARTESIAN_POINT('',(0.529793591883,-0.15));+#3556 = VECTOR('',#3557,1.);+#3557 = DIRECTION('',(0.,1.));+#3558 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3559 = ORIENTED_EDGE('',*,*,#3560,.T.);+#3560 = EDGE_CURVE('',#3538,#3561,#3563,.T.);+#3561 = VERTEX_POINT('',#3562);+#3562 = CARTESIAN_POINT('',(-2.15,0.175,0.445));+#3563 = SURFACE_CURVE('',#3564,(#3568,#3575),.PCURVE_S1.);+#3564 = LINE('',#3565,#3566);+#3565 = CARTESIAN_POINT('',(-2.2,0.175,0.445));+#3566 = VECTOR('',#3567,1.);+#3567 = DIRECTION('',(1.,0.,0.));+#3568 = PCURVE('',#3501,#3569);+#3569 = DEFINITIONAL_REPRESENTATION('',(#3570),#3574);+#3570 = LINE('',#3571,#3572);+#3571 = CARTESIAN_POINT('',(0.,-0.15));+#3572 = VECTOR('',#3573,1.);+#3573 = DIRECTION('',(1.,0.));+#3574 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3575 = PCURVE('',#3280,#3576);+#3576 = DEFINITIONAL_REPRESENTATION('',(#3577),#3581);+#3577 = LINE('',#3578,#3579);+#3578 = CARTESIAN_POINT('',(-0.227057976796,0.434182274245));+#3579 = VECTOR('',#3580,1.);+#3580 = DIRECTION('',(0.,1.));+#3581 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3582 = ORIENTED_EDGE('',*,*,#3583,.T.);+#3583 = EDGE_CURVE('',#3561,#3486,#3584,.T.);+#3584 = SURFACE_CURVE('',#3585,(#3589,#3596),.PCURVE_S1.);+#3585 = LINE('',#3586,#3587);+#3586 = CARTESIAN_POINT('',(-2.15,0.175,0.445));+#3587 = VECTOR('',#3588,1.);+#3588 = DIRECTION('',(0.,1.,0.));+#3589 = PCURVE('',#3501,#3590);+#3590 = DEFINITIONAL_REPRESENTATION('',(#3591),#3595);+#3591 = LINE('',#3592,#3593);+#3592 = CARTESIAN_POINT('',(5.E-02,-0.15));+#3593 = VECTOR('',#3594,1.);+#3594 = DIRECTION('',(0.,1.));+#3595 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3596 = PCURVE('',#3252,#3597);+#3597 = DEFINITIONAL_REPRESENTATION('',(#3598),#3602);+#3598 = LINE('',#3599,#3600);+#3599 = CARTESIAN_POINT('',(0.,-0.15));+#3600 = VECTOR('',#3601,1.);+#3601 = DIRECTION('',(0.,1.));+#3602 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3603 = ORIENTED_EDGE('',*,*,#3485,.F.);+#3604 = ADVANCED_FACE('',(#3605),#3473,.F.);+#3605 = FACE_BOUND('',#3606,.F.);+#3606 = EDGE_LOOP('',(#3607,#3630,#3631,#3632));+#3607 = ORIENTED_EDGE('',*,*,#3608,.T.);+#3608 = EDGE_CURVE('',#3609,#3538,#3611,.T.);+#3609 = VERTEX_POINT('',#3610);+#3610 = CARTESIAN_POINT('',(-2.4875,0.175,0.));+#3611 = SURFACE_CURVE('',#3612,(#3616,#3623),.PCURVE_S1.);+#3612 = LINE('',#3613,#3614);+#3613 = CARTESIAN_POINT('',(-2.4875,0.175,0.));+#3614 = VECTOR('',#3615,1.);+#3615 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#3616 = PCURVE('',#3473,#3617);+#3617 = DEFINITIONAL_REPRESENTATION('',(#3618),#3622);+#3618 = LINE('',#3619,#3620);+#3619 = CARTESIAN_POINT('',(0.,-0.15));+#3620 = VECTOR('',#3621,1.);+#3621 = DIRECTION('',(1.,0.));+#3622 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3623 = PCURVE('',#3280,#3624);+#3624 = DEFINITIONAL_REPRESENTATION('',(#3625),#3629);+#3625 = LINE('',#3626,#3627);+#3626 = CARTESIAN_POINT('',(0.217942023204,0.146682274245));+#3627 = VECTOR('',#3628,1.);+#3628 = DIRECTION('',(-0.839949759337,0.542664170358));+#3629 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3630 = ORIENTED_EDGE('',*,*,#3537,.T.);+#3631 = ORIENTED_EDGE('',*,*,#3457,.F.);+#3632 = ORIENTED_EDGE('',*,*,#3633,.T.);+#3633 = EDGE_CURVE('',#3430,#3609,#3634,.T.);+#3634 = SURFACE_CURVE('',#3635,(#3639,#3646),.PCURVE_S1.);+#3635 = LINE('',#3636,#3637);+#3636 = CARTESIAN_POINT('',(-2.4875,0.475,0.));+#3637 = VECTOR('',#3638,1.);+#3638 = DIRECTION('',(0.,-1.,0.));+#3639 = PCURVE('',#3473,#3640);+#3640 = DEFINITIONAL_REPRESENTATION('',(#3641),#3645);+#3641 = LINE('',#3642,#3643);+#3642 = CARTESIAN_POINT('',(0.,0.15));+#3643 = VECTOR('',#3644,1.);+#3644 = DIRECTION('',(0.,-1.));+#3645 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3646 = PCURVE('',#3445,#3647);+#3647 = DEFINITIONAL_REPRESENTATION('',(#3648),#3652);+#3648 = LINE('',#3649,#3650);+#3649 = CARTESIAN_POINT('',(0.7175,0.15));+#3650 = VECTOR('',#3651,1.);+#3651 = DIRECTION('',(0.,-1.));+#3652 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3653 = ADVANCED_FACE('',(#3654),#3445,.F.);+#3654 = FACE_BOUND('',#3655,.F.);+#3655 = EDGE_LOOP('',(#3656,#3679,#3680,#3681));+#3656 = ORIENTED_EDGE('',*,*,#3657,.T.);+#3657 = EDGE_CURVE('',#3658,#3609,#3660,.T.);+#3658 = VERTEX_POINT('',#3659);+#3659 = CARTESIAN_POINT('',(-3.205,0.175,0.));+#3660 = SURFACE_CURVE('',#3661,(#3665,#3672),.PCURVE_S1.);+#3661 = LINE('',#3662,#3663);+#3662 = CARTESIAN_POINT('',(-3.205,0.175,0.));+#3663 = VECTOR('',#3664,1.);+#3664 = DIRECTION('',(1.,0.,0.));+#3665 = PCURVE('',#3445,#3666);+#3666 = DEFINITIONAL_REPRESENTATION('',(#3667),#3671);+#3667 = LINE('',#3668,#3669);+#3668 = CARTESIAN_POINT('',(0.,-0.15));+#3669 = VECTOR('',#3670,1.);+#3670 = DIRECTION('',(1.,0.));+#3671 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3672 = PCURVE('',#3280,#3673);+#3673 = DEFINITIONAL_REPRESENTATION('',(#3674),#3678);+#3674 = LINE('',#3675,#3676);+#3675 = CARTESIAN_POINT('',(0.217942023204,-0.570817725755));+#3676 = VECTOR('',#3677,1.);+#3677 = DIRECTION('',(0.,1.));+#3678 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3679 = ORIENTED_EDGE('',*,*,#3633,.F.);+#3680 = ORIENTED_EDGE('',*,*,#3429,.F.);+#3681 = ORIENTED_EDGE('',*,*,#3682,.T.);+#3682 = EDGE_CURVE('',#3402,#3658,#3683,.T.);+#3683 = SURFACE_CURVE('',#3684,(#3688,#3695),.PCURVE_S1.);+#3684 = LINE('',#3685,#3686);+#3685 = CARTESIAN_POINT('',(-3.205,0.475,0.));+#3686 = VECTOR('',#3687,1.);+#3687 = DIRECTION('',(0.,-1.,0.));+#3688 = PCURVE('',#3445,#3689);+#3689 = DEFINITIONAL_REPRESENTATION('',(#3690),#3694);+#3690 = LINE('',#3691,#3692);+#3691 = CARTESIAN_POINT('',(0.,0.15));+#3692 = VECTOR('',#3693,1.);+#3693 = DIRECTION('',(0.,-1.));+#3694 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3695 = PCURVE('',#3417,#3696);+#3696 = DEFINITIONAL_REPRESENTATION('',(#3697),#3701);+#3697 = LINE('',#3698,#3699);+#3698 = CARTESIAN_POINT('',(0.15,0.15));+#3699 = VECTOR('',#3700,1.);+#3700 = DIRECTION('',(0.,-1.));+#3701 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3702 = ADVANCED_FACE('',(#3703),#3417,.F.);+#3703 = FACE_BOUND('',#3704,.F.);+#3704 = EDGE_LOOP('',(#3705,#3728,#3729,#3730));+#3705 = ORIENTED_EDGE('',*,*,#3706,.T.);+#3706 = EDGE_CURVE('',#3707,#3658,#3709,.T.);+#3707 = VERTEX_POINT('',#3708);+#3708 = CARTESIAN_POINT('',(-3.205,0.175,0.15));+#3709 = SURFACE_CURVE('',#3710,(#3714,#3721),.PCURVE_S1.);+#3710 = LINE('',#3711,#3712);+#3711 = CARTESIAN_POINT('',(-3.205,0.175,0.15));+#3712 = VECTOR('',#3713,1.);+#3713 = DIRECTION('',(0.,0.,-1.));+#3714 = PCURVE('',#3417,#3715);+#3715 = DEFINITIONAL_REPRESENTATION('',(#3716),#3720);+#3716 = LINE('',#3717,#3718);+#3717 = CARTESIAN_POINT('',(0.,-0.15));+#3718 = VECTOR('',#3719,1.);+#3719 = DIRECTION('',(1.,0.));+#3720 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3721 = PCURVE('',#3280,#3722);+#3722 = DEFINITIONAL_REPRESENTATION('',(#3723),#3727);+#3723 = LINE('',#3724,#3725);+#3724 = CARTESIAN_POINT('',(6.7942023204E-02,-0.570817725755));+#3725 = VECTOR('',#3726,1.);+#3726 = DIRECTION('',(1.,0.));+#3727 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3728 = ORIENTED_EDGE('',*,*,#3682,.F.);+#3729 = ORIENTED_EDGE('',*,*,#3401,.F.);+#3730 = ORIENTED_EDGE('',*,*,#3731,.T.);+#3731 = EDGE_CURVE('',#3374,#3707,#3732,.T.);+#3732 = SURFACE_CURVE('',#3733,(#3737,#3744),.PCURVE_S1.);+#3733 = LINE('',#3734,#3735);+#3734 = CARTESIAN_POINT('',(-3.205,0.475,0.15));+#3735 = VECTOR('',#3736,1.);+#3736 = DIRECTION('',(0.,-1.,0.));+#3737 = PCURVE('',#3417,#3738);+#3738 = DEFINITIONAL_REPRESENTATION('',(#3739),#3743);+#3739 = LINE('',#3740,#3741);+#3740 = CARTESIAN_POINT('',(0.,0.15));+#3741 = VECTOR('',#3742,1.);+#3742 = DIRECTION('',(0.,-1.));+#3743 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3744 = PCURVE('',#3389,#3745);+#3745 = DEFINITIONAL_REPRESENTATION('',(#3746),#3750);+#3746 = LINE('',#3747,#3748);+#3747 = CARTESIAN_POINT('',(0.5675,0.15));+#3748 = VECTOR('',#3749,1.);+#3749 = DIRECTION('',(0.,-1.));+#3750 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3751 = ADVANCED_FACE('',(#3752),#3389,.F.);+#3752 = FACE_BOUND('',#3753,.F.);+#3753 = EDGE_LOOP('',(#3754,#3777,#3778,#3779));+#3754 = ORIENTED_EDGE('',*,*,#3755,.T.);+#3755 = EDGE_CURVE('',#3756,#3707,#3758,.T.);+#3756 = VERTEX_POINT('',#3757);+#3757 = CARTESIAN_POINT('',(-2.6375,0.175,0.15));+#3758 = SURFACE_CURVE('',#3759,(#3763,#3770),.PCURVE_S1.);+#3759 = LINE('',#3760,#3761);+#3760 = CARTESIAN_POINT('',(-2.6375,0.175,0.15));+#3761 = VECTOR('',#3762,1.);+#3762 = DIRECTION('',(-1.,0.,0.));+#3763 = PCURVE('',#3389,#3764);+#3764 = DEFINITIONAL_REPRESENTATION('',(#3765),#3769);+#3765 = LINE('',#3766,#3767);+#3766 = CARTESIAN_POINT('',(0.,-0.15));+#3767 = VECTOR('',#3768,1.);+#3768 = DIRECTION('',(1.,0.));+#3769 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3770 = PCURVE('',#3280,#3771);+#3771 = DEFINITIONAL_REPRESENTATION('',(#3772),#3776);+#3772 = LINE('',#3773,#3774);+#3773 = CARTESIAN_POINT('',(6.7942023204E-02,-3.317725755E-03));+#3774 = VECTOR('',#3775,1.);+#3775 = DIRECTION('',(0.,-1.));+#3776 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3777 = ORIENTED_EDGE('',*,*,#3731,.F.);+#3778 = ORIENTED_EDGE('',*,*,#3373,.F.);+#3779 = ORIENTED_EDGE('',*,*,#3780,.T.);+#3780 = EDGE_CURVE('',#3351,#3756,#3781,.T.);+#3781 = SURFACE_CURVE('',#3782,(#3786,#3793),.PCURVE_S1.);+#3782 = LINE('',#3783,#3784);+#3783 = CARTESIAN_POINT('',(-2.6375,0.475,0.15));+#3784 = VECTOR('',#3785,1.);+#3785 = DIRECTION('',(0.,-1.,0.));+#3786 = PCURVE('',#3389,#3787);+#3787 = DEFINITIONAL_REPRESENTATION('',(#3788),#3792);+#3788 = LINE('',#3789,#3790);+#3789 = CARTESIAN_POINT('',(0.,0.15));+#3790 = VECTOR('',#3791,1.);+#3791 = DIRECTION('',(0.,-1.));+#3792 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3793 = PCURVE('',#3308,#3794);+#3794 = DEFINITIONAL_REPRESENTATION('',(#3795),#3799);+#3795 = LINE('',#3796,#3797);+#3796 = CARTESIAN_POINT('',(0.529793591883,0.15));+#3797 = VECTOR('',#3798,1.);+#3798 = DIRECTION('',(-0.,-1.));+#3799 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3800 = ADVANCED_FACE('',(#3801),#3308,.F.);+#3801 = FACE_BOUND('',#3802,.F.);+#3802 = EDGE_LOOP('',(#3803,#3824,#3825,#3826));+#3803 = ORIENTED_EDGE('',*,*,#3804,.T.);+#3804 = EDGE_CURVE('',#3265,#3756,#3805,.T.);+#3805 = SURFACE_CURVE('',#3806,(#3810,#3817),.PCURVE_S1.);+#3806 = LINE('',#3807,#3808);+#3807 = CARTESIAN_POINT('',(-2.35,0.175,0.595));+#3808 = VECTOR('',#3809,1.);+#3809 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#3810 = PCURVE('',#3308,#3811);+#3811 = DEFINITIONAL_REPRESENTATION('',(#3812),#3816);+#3812 = LINE('',#3813,#3814);+#3813 = CARTESIAN_POINT('',(-0.,-0.15));+#3814 = VECTOR('',#3815,1.);+#3815 = DIRECTION('',(1.,0.));+#3816 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3817 = PCURVE('',#3280,#3818);+#3818 = DEFINITIONAL_REPRESENTATION('',(#3819),#3823);+#3819 = LINE('',#3820,#3821);+#3820 = CARTESIAN_POINT('',(-0.377057976796,0.284182274245));+#3821 = VECTOR('',#3822,1.);+#3822 = DIRECTION('',(0.839949759337,-0.542664170358));+#3823 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3824 = ORIENTED_EDGE('',*,*,#3780,.F.);+#3825 = ORIENTED_EDGE('',*,*,#3350,.F.);+#3826 = ORIENTED_EDGE('',*,*,#3292,.T.);+#3827 = ADVANCED_FACE('',(#3828),#3280,.T.);+#3828 = FACE_BOUND('',#3829,.T.);+#3829 = EDGE_LOOP('',(#3830,#3831,#3832,#3833,#3834,#3835,#3836,#3837));+#3830 = ORIENTED_EDGE('',*,*,#3264,.T.);+#3831 = ORIENTED_EDGE('',*,*,#3804,.T.);+#3832 = ORIENTED_EDGE('',*,*,#3755,.T.);+#3833 = ORIENTED_EDGE('',*,*,#3706,.T.);+#3834 = ORIENTED_EDGE('',*,*,#3657,.T.);+#3835 = ORIENTED_EDGE('',*,*,#3608,.T.);+#3836 = ORIENTED_EDGE('',*,*,#3560,.T.);+#3837 = ORIENTED_EDGE('',*,*,#3838,.T.);+#3838 = EDGE_CURVE('',#3561,#3230,#3839,.T.);+#3839 = SURFACE_CURVE('',#3840,(#3844,#3851),.PCURVE_S1.);+#3840 = LINE('',#3841,#3842);+#3841 = CARTESIAN_POINT('',(-2.15,0.175,0.445));+#3842 = VECTOR('',#3843,1.);+#3843 = DIRECTION('',(0.,0.,1.));+#3844 = PCURVE('',#3280,#3845);+#3845 = DEFINITIONAL_REPRESENTATION('',(#3846),#3850);+#3846 = LINE('',#3847,#3848);+#3847 = CARTESIAN_POINT('',(-0.227057976796,0.484182274245));+#3848 = VECTOR('',#3849,1.);+#3849 = DIRECTION('',(-1.,0.));+#3850 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3851 = PCURVE('',#3252,#3852);+#3852 = DEFINITIONAL_REPRESENTATION('',(#3853),#3857);+#3853 = LINE('',#3854,#3855);+#3854 = CARTESIAN_POINT('',(0.,-0.15));+#3855 = VECTOR('',#3856,1.);+#3856 = DIRECTION('',(1.,0.));+#3857 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3858 = ADVANCED_FACE('',(#3859),#3252,.F.);+#3859 = FACE_BOUND('',#3860,.F.);+#3860 = EDGE_LOOP('',(#3861,#3862,#3863,#3864));+#3861 = ORIENTED_EDGE('',*,*,#3583,.F.);+#3862 = ORIENTED_EDGE('',*,*,#3838,.T.);+#3863 = ORIENTED_EDGE('',*,*,#3229,.T.);+#3864 = ORIENTED_EDGE('',*,*,#3513,.F.);+#3865 = MANIFOLD_SOLID_BREP('',#3866);+#3866 = CLOSED_SHELL('',(#3867,#3987,#4175,#4246,#4295,#4344,#4393,#4442+ ,#4469,#4500));+#3867 = ADVANCED_FACE('',(#3868),#3882,.F.);+#3868 = FACE_BOUND('',#3869,.F.);+#3869 = EDGE_LOOP('',(#3870,#3905,#3933,#3961));+#3870 = ORIENTED_EDGE('',*,*,#3871,.F.);+#3871 = EDGE_CURVE('',#3872,#3874,#3876,.T.);+#3872 = VERTEX_POINT('',#3873);+#3873 = CARTESIAN_POINT('',(-2.15,-0.475,0.595));+#3874 = VERTEX_POINT('',#3875);+#3875 = CARTESIAN_POINT('',(-2.15,-0.175,0.595));+#3876 = SURFACE_CURVE('',#3877,(#3881,#3893),.PCURVE_S1.);+#3877 = LINE('',#3878,#3879);+#3878 = CARTESIAN_POINT('',(-2.15,-0.475,0.595));+#3879 = VECTOR('',#3880,1.);+#3880 = DIRECTION('',(0.,1.,0.));+#3881 = PCURVE('',#3882,#3887);+#3882 = PLANE('',#3883);+#3883 = AXIS2_PLACEMENT_3D('',#3884,#3885,#3886);+#3884 = CARTESIAN_POINT('',(-2.15,-0.325,0.595));+#3885 = DIRECTION('',(-0.,-0.,-1.));+#3886 = DIRECTION('',(-1.,0.,0.));+#3887 = DEFINITIONAL_REPRESENTATION('',(#3888),#3892);+#3888 = LINE('',#3889,#3890);+#3889 = CARTESIAN_POINT('',(0.,-0.15));+#3890 = VECTOR('',#3891,1.);+#3891 = DIRECTION('',(0.,1.));+#3892 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3893 = PCURVE('',#3894,#3899);+#3894 = PLANE('',#3895);+#3895 = AXIS2_PLACEMENT_3D('',#3896,#3897,#3898);+#3896 = CARTESIAN_POINT('',(-2.15,-0.325,0.445));+#3897 = DIRECTION('',(-1.,0.,0.));+#3898 = DIRECTION('',(0.,0.,1.));+#3899 = DEFINITIONAL_REPRESENTATION('',(#3900),#3904);+#3900 = LINE('',#3901,#3902);+#3901 = CARTESIAN_POINT('',(0.15,-0.15));+#3902 = VECTOR('',#3903,1.);+#3903 = DIRECTION('',(0.,1.));+#3904 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3905 = ORIENTED_EDGE('',*,*,#3906,.T.);+#3906 = EDGE_CURVE('',#3872,#3907,#3909,.T.);+#3907 = VERTEX_POINT('',#3908);+#3908 = CARTESIAN_POINT('',(-2.35,-0.475,0.595));+#3909 = SURFACE_CURVE('',#3910,(#3914,#3921),.PCURVE_S1.);+#3910 = LINE('',#3911,#3912);+#3911 = CARTESIAN_POINT('',(-2.15,-0.475,0.595));+#3912 = VECTOR('',#3913,1.);+#3913 = DIRECTION('',(-1.,0.,0.));+#3914 = PCURVE('',#3882,#3915);+#3915 = DEFINITIONAL_REPRESENTATION('',(#3916),#3920);+#3916 = LINE('',#3917,#3918);+#3917 = CARTESIAN_POINT('',(0.,-0.15));+#3918 = VECTOR('',#3919,1.);+#3919 = DIRECTION('',(1.,0.));+#3920 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3921 = PCURVE('',#3922,#3927);+#3922 = PLANE('',#3923);+#3923 = AXIS2_PLACEMENT_3D('',#3924,#3925,#3926);+#3924 = CARTESIAN_POINT('',(-2.634182274245,-0.475,0.217942023204));+#3925 = DIRECTION('',(-0.,-1.,-0.));+#3926 = DIRECTION('',(0.,0.,-1.));+#3927 = DEFINITIONAL_REPRESENTATION('',(#3928),#3932);+#3928 = LINE('',#3929,#3930);+#3929 = CARTESIAN_POINT('',(-0.377057976796,0.484182274245));+#3930 = VECTOR('',#3931,1.);+#3931 = DIRECTION('',(0.,-1.));+#3932 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3933 = ORIENTED_EDGE('',*,*,#3934,.F.);+#3934 = EDGE_CURVE('',#3935,#3907,#3937,.T.);+#3935 = VERTEX_POINT('',#3936);+#3936 = CARTESIAN_POINT('',(-2.35,-0.175,0.595));+#3937 = SURFACE_CURVE('',#3938,(#3942,#3949),.PCURVE_S1.);+#3938 = LINE('',#3939,#3940);+#3939 = CARTESIAN_POINT('',(-2.35,-0.175,0.595));+#3940 = VECTOR('',#3941,1.);+#3941 = DIRECTION('',(0.,-1.,0.));+#3942 = PCURVE('',#3882,#3943);+#3943 = DEFINITIONAL_REPRESENTATION('',(#3944),#3948);+#3944 = LINE('',#3945,#3946);+#3945 = CARTESIAN_POINT('',(0.2,0.15));+#3946 = VECTOR('',#3947,1.);+#3947 = DIRECTION('',(0.,-1.));+#3948 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3949 = PCURVE('',#3950,#3955);+#3950 = PLANE('',#3951);+#3951 = AXIS2_PLACEMENT_3D('',#3952,#3953,#3954);+#3952 = CARTESIAN_POINT('',(-2.35,-0.325,0.595));+#3953 = DIRECTION('',(0.839949759337,0.,-0.542664170358));+#3954 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#3955 = DEFINITIONAL_REPRESENTATION('',(#3956),#3960);+#3956 = LINE('',#3957,#3958);+#3957 = CARTESIAN_POINT('',(0.,0.15));+#3958 = VECTOR('',#3959,1.);+#3959 = DIRECTION('',(-0.,-1.));+#3960 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3961 = ORIENTED_EDGE('',*,*,#3962,.F.);+#3962 = EDGE_CURVE('',#3874,#3935,#3963,.T.);+#3963 = SURFACE_CURVE('',#3964,(#3968,#3975),.PCURVE_S1.);+#3964 = LINE('',#3965,#3966);+#3965 = CARTESIAN_POINT('',(-2.15,-0.175,0.595));+#3966 = VECTOR('',#3967,1.);+#3967 = DIRECTION('',(-1.,0.,0.));+#3968 = PCURVE('',#3882,#3969);+#3969 = DEFINITIONAL_REPRESENTATION('',(#3970),#3974);+#3970 = LINE('',#3971,#3972);+#3971 = CARTESIAN_POINT('',(0.,0.15));+#3972 = VECTOR('',#3973,1.);+#3973 = DIRECTION('',(1.,0.));+#3974 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3975 = PCURVE('',#3976,#3981);+#3976 = PLANE('',#3977);+#3977 = AXIS2_PLACEMENT_3D('',#3978,#3979,#3980);+#3978 = CARTESIAN_POINT('',(-2.634182274245,-0.175,0.217942023204));+#3979 = DIRECTION('',(-0.,-1.,-0.));+#3980 = DIRECTION('',(0.,0.,-1.));+#3981 = DEFINITIONAL_REPRESENTATION('',(#3982),#3986);+#3982 = LINE('',#3983,#3984);+#3983 = CARTESIAN_POINT('',(-0.377057976796,0.484182274245));+#3984 = VECTOR('',#3985,1.);+#3985 = DIRECTION('',(0.,-1.));+#3986 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3987 = ADVANCED_FACE('',(#3988),#3976,.F.);+#3988 = FACE_BOUND('',#3989,.F.);+#3989 = EDGE_LOOP('',(#3990,#3991,#4014,#4042,#4070,#4098,#4126,#4154));+#3990 = ORIENTED_EDGE('',*,*,#3962,.T.);+#3991 = ORIENTED_EDGE('',*,*,#3992,.T.);+#3992 = EDGE_CURVE('',#3935,#3993,#3995,.T.);+#3993 = VERTEX_POINT('',#3994);+#3994 = CARTESIAN_POINT('',(-2.6375,-0.175,0.15));+#3995 = SURFACE_CURVE('',#3996,(#4000,#4007),.PCURVE_S1.);+#3996 = LINE('',#3997,#3998);+#3997 = CARTESIAN_POINT('',(-2.35,-0.175,0.595));+#3998 = VECTOR('',#3999,1.);+#3999 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#4000 = PCURVE('',#3976,#4001);+#4001 = DEFINITIONAL_REPRESENTATION('',(#4002),#4006);+#4002 = LINE('',#4003,#4004);+#4003 = CARTESIAN_POINT('',(-0.377057976796,0.284182274245));+#4004 = VECTOR('',#4005,1.);+#4005 = DIRECTION('',(0.839949759337,-0.542664170358));+#4006 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4007 = PCURVE('',#3950,#4008);+#4008 = DEFINITIONAL_REPRESENTATION('',(#4009),#4013);+#4009 = LINE('',#4010,#4011);+#4010 = CARTESIAN_POINT('',(0.,0.15));+#4011 = VECTOR('',#4012,1.);+#4012 = DIRECTION('',(1.,0.));+#4013 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4014 = ORIENTED_EDGE('',*,*,#4015,.T.);+#4015 = EDGE_CURVE('',#3993,#4016,#4018,.T.);+#4016 = VERTEX_POINT('',#4017);+#4017 = CARTESIAN_POINT('',(-3.205,-0.175,0.15));+#4018 = SURFACE_CURVE('',#4019,(#4023,#4030),.PCURVE_S1.);+#4019 = LINE('',#4020,#4021);+#4020 = CARTESIAN_POINT('',(-2.6375,-0.175,0.15));+#4021 = VECTOR('',#4022,1.);+#4022 = DIRECTION('',(-1.,0.,0.));+#4023 = PCURVE('',#3976,#4024);+#4024 = DEFINITIONAL_REPRESENTATION('',(#4025),#4029);+#4025 = LINE('',#4026,#4027);+#4026 = CARTESIAN_POINT('',(6.7942023204E-02,-3.317725755E-03));+#4027 = VECTOR('',#4028,1.);+#4028 = DIRECTION('',(0.,-1.));+#4029 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4030 = PCURVE('',#4031,#4036);+#4031 = PLANE('',#4032);+#4032 = AXIS2_PLACEMENT_3D('',#4033,#4034,#4035);+#4033 = CARTESIAN_POINT('',(-2.6375,-0.325,0.15));+#4034 = DIRECTION('',(-0.,-0.,-1.));+#4035 = DIRECTION('',(-1.,0.,0.));+#4036 = DEFINITIONAL_REPRESENTATION('',(#4037),#4041);+#4037 = LINE('',#4038,#4039);+#4038 = CARTESIAN_POINT('',(0.,0.15));+#4039 = VECTOR('',#4040,1.);+#4040 = DIRECTION('',(1.,0.));+#4041 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4042 = ORIENTED_EDGE('',*,*,#4043,.T.);+#4043 = EDGE_CURVE('',#4016,#4044,#4046,.T.);+#4044 = VERTEX_POINT('',#4045);+#4045 = CARTESIAN_POINT('',(-3.205,-0.175,0.));+#4046 = SURFACE_CURVE('',#4047,(#4051,#4058),.PCURVE_S1.);+#4047 = LINE('',#4048,#4049);+#4048 = CARTESIAN_POINT('',(-3.205,-0.175,0.15));+#4049 = VECTOR('',#4050,1.);+#4050 = DIRECTION('',(0.,0.,-1.));+#4051 = PCURVE('',#3976,#4052);+#4052 = DEFINITIONAL_REPRESENTATION('',(#4053),#4057);+#4053 = LINE('',#4054,#4055);+#4054 = CARTESIAN_POINT('',(6.7942023204E-02,-0.570817725755));+#4055 = VECTOR('',#4056,1.);+#4056 = DIRECTION('',(1.,0.));+#4057 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4058 = PCURVE('',#4059,#4064);+#4059 = PLANE('',#4060);+#4060 = AXIS2_PLACEMENT_3D('',#4061,#4062,#4063);+#4061 = CARTESIAN_POINT('',(-3.205,-0.325,0.15));+#4062 = DIRECTION('',(1.,0.,0.));+#4063 = DIRECTION('',(0.,0.,-1.));+#4064 = DEFINITIONAL_REPRESENTATION('',(#4065),#4069);+#4065 = LINE('',#4066,#4067);+#4066 = CARTESIAN_POINT('',(0.,0.15));+#4067 = VECTOR('',#4068,1.);+#4068 = DIRECTION('',(1.,0.));+#4069 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4070 = ORIENTED_EDGE('',*,*,#4071,.T.);+#4071 = EDGE_CURVE('',#4044,#4072,#4074,.T.);+#4072 = VERTEX_POINT('',#4073);+#4073 = CARTESIAN_POINT('',(-2.4875,-0.175,0.));+#4074 = SURFACE_CURVE('',#4075,(#4079,#4086),.PCURVE_S1.);+#4075 = LINE('',#4076,#4077);+#4076 = CARTESIAN_POINT('',(-3.205,-0.175,0.));+#4077 = VECTOR('',#4078,1.);+#4078 = DIRECTION('',(1.,0.,0.));+#4079 = PCURVE('',#3976,#4080);+#4080 = DEFINITIONAL_REPRESENTATION('',(#4081),#4085);+#4081 = LINE('',#4082,#4083);+#4082 = CARTESIAN_POINT('',(0.217942023204,-0.570817725755));+#4083 = VECTOR('',#4084,1.);+#4084 = DIRECTION('',(0.,1.));+#4085 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4086 = PCURVE('',#4087,#4092);+#4087 = PLANE('',#4088);+#4088 = AXIS2_PLACEMENT_3D('',#4089,#4090,#4091);+#4089 = CARTESIAN_POINT('',(-3.205,-0.325,0.));+#4090 = DIRECTION('',(0.,0.,1.));+#4091 = DIRECTION('',(1.,0.,0.));+#4092 = DEFINITIONAL_REPRESENTATION('',(#4093),#4097);+#4093 = LINE('',#4094,#4095);+#4094 = CARTESIAN_POINT('',(0.,0.15));+#4095 = VECTOR('',#4096,1.);+#4096 = DIRECTION('',(1.,0.));+#4097 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4098 = ORIENTED_EDGE('',*,*,#4099,.T.);+#4099 = EDGE_CURVE('',#4072,#4100,#4102,.T.);+#4100 = VERTEX_POINT('',#4101);+#4101 = CARTESIAN_POINT('',(-2.2,-0.175,0.445));+#4102 = SURFACE_CURVE('',#4103,(#4107,#4114),.PCURVE_S1.);+#4103 = LINE('',#4104,#4105);+#4104 = CARTESIAN_POINT('',(-2.4875,-0.175,0.));+#4105 = VECTOR('',#4106,1.);+#4106 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#4107 = PCURVE('',#3976,#4108);+#4108 = DEFINITIONAL_REPRESENTATION('',(#4109),#4113);+#4109 = LINE('',#4110,#4111);+#4110 = CARTESIAN_POINT('',(0.217942023204,0.146682274245));+#4111 = VECTOR('',#4112,1.);+#4112 = DIRECTION('',(-0.839949759337,0.542664170358));+#4113 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4114 = PCURVE('',#4115,#4120);+#4115 = PLANE('',#4116);+#4116 = AXIS2_PLACEMENT_3D('',#4117,#4118,#4119);+#4117 = CARTESIAN_POINT('',(-2.4875,-0.325,0.));+#4118 = DIRECTION('',(-0.839949759337,0.,0.542664170358));+#4119 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#4120 = DEFINITIONAL_REPRESENTATION('',(#4121),#4125);+#4121 = LINE('',#4122,#4123);+#4122 = CARTESIAN_POINT('',(0.,0.15));+#4123 = VECTOR('',#4124,1.);+#4124 = DIRECTION('',(1.,0.));+#4125 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4126 = ORIENTED_EDGE('',*,*,#4127,.T.);+#4127 = EDGE_CURVE('',#4100,#4128,#4130,.T.);+#4128 = VERTEX_POINT('',#4129);+#4129 = CARTESIAN_POINT('',(-2.15,-0.175,0.445));+#4130 = SURFACE_CURVE('',#4131,(#4135,#4142),.PCURVE_S1.);+#4131 = LINE('',#4132,#4133);+#4132 = CARTESIAN_POINT('',(-2.2,-0.175,0.445));+#4133 = VECTOR('',#4134,1.);+#4134 = DIRECTION('',(1.,0.,0.));+#4135 = PCURVE('',#3976,#4136);+#4136 = DEFINITIONAL_REPRESENTATION('',(#4137),#4141);+#4137 = LINE('',#4138,#4139);+#4138 = CARTESIAN_POINT('',(-0.227057976796,0.434182274245));+#4139 = VECTOR('',#4140,1.);+#4140 = DIRECTION('',(0.,1.));+#4141 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4142 = PCURVE('',#4143,#4148);+#4143 = PLANE('',#4144);+#4144 = AXIS2_PLACEMENT_3D('',#4145,#4146,#4147);+#4145 = CARTESIAN_POINT('',(-2.2,-0.325,0.445));+#4146 = DIRECTION('',(0.,0.,1.));+#4147 = DIRECTION('',(1.,0.,0.));+#4148 = DEFINITIONAL_REPRESENTATION('',(#4149),#4153);+#4149 = LINE('',#4150,#4151);+#4150 = CARTESIAN_POINT('',(0.,0.15));+#4151 = VECTOR('',#4152,1.);+#4152 = DIRECTION('',(1.,0.));+#4153 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4154 = ORIENTED_EDGE('',*,*,#4155,.T.);+#4155 = EDGE_CURVE('',#4128,#3874,#4156,.T.);+#4156 = SURFACE_CURVE('',#4157,(#4161,#4168),.PCURVE_S1.);+#4157 = LINE('',#4158,#4159);+#4158 = CARTESIAN_POINT('',(-2.15,-0.175,0.445));+#4159 = VECTOR('',#4160,1.);+#4160 = DIRECTION('',(0.,0.,1.));+#4161 = PCURVE('',#3976,#4162);+#4162 = DEFINITIONAL_REPRESENTATION('',(#4163),#4167);+#4163 = LINE('',#4164,#4165);+#4164 = CARTESIAN_POINT('',(-0.227057976796,0.484182274245));+#4165 = VECTOR('',#4166,1.);+#4166 = DIRECTION('',(-1.,0.));+#4167 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4168 = PCURVE('',#3894,#4169);+#4169 = DEFINITIONAL_REPRESENTATION('',(#4170),#4174);+#4170 = LINE('',#4171,#4172);+#4171 = CARTESIAN_POINT('',(0.,0.15));+#4172 = VECTOR('',#4173,1.);+#4173 = DIRECTION('',(1.,0.));+#4174 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4175 = ADVANCED_FACE('',(#4176),#4143,.F.);+#4176 = FACE_BOUND('',#4177,.F.);+#4177 = EDGE_LOOP('',(#4178,#4201,#4224,#4245));+#4178 = ORIENTED_EDGE('',*,*,#4179,.F.);+#4179 = EDGE_CURVE('',#4180,#4100,#4182,.T.);+#4180 = VERTEX_POINT('',#4181);+#4181 = CARTESIAN_POINT('',(-2.2,-0.475,0.445));+#4182 = SURFACE_CURVE('',#4183,(#4187,#4194),.PCURVE_S1.);+#4183 = LINE('',#4184,#4185);+#4184 = CARTESIAN_POINT('',(-2.2,-0.475,0.445));+#4185 = VECTOR('',#4186,1.);+#4186 = DIRECTION('',(0.,1.,0.));+#4187 = PCURVE('',#4143,#4188);+#4188 = DEFINITIONAL_REPRESENTATION('',(#4189),#4193);+#4189 = LINE('',#4190,#4191);+#4190 = CARTESIAN_POINT('',(0.,-0.15));+#4191 = VECTOR('',#4192,1.);+#4192 = DIRECTION('',(0.,1.));+#4193 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4194 = PCURVE('',#4115,#4195);+#4195 = DEFINITIONAL_REPRESENTATION('',(#4196),#4200);+#4196 = LINE('',#4197,#4198);+#4197 = CARTESIAN_POINT('',(0.529793591883,-0.15));+#4198 = VECTOR('',#4199,1.);+#4199 = DIRECTION('',(0.,1.));+#4200 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4201 = ORIENTED_EDGE('',*,*,#4202,.T.);+#4202 = EDGE_CURVE('',#4180,#4203,#4205,.T.);+#4203 = VERTEX_POINT('',#4204);+#4204 = CARTESIAN_POINT('',(-2.15,-0.475,0.445));+#4205 = SURFACE_CURVE('',#4206,(#4210,#4217),.PCURVE_S1.);+#4206 = LINE('',#4207,#4208);+#4207 = CARTESIAN_POINT('',(-2.2,-0.475,0.445));+#4208 = VECTOR('',#4209,1.);+#4209 = DIRECTION('',(1.,0.,0.));+#4210 = PCURVE('',#4143,#4211);+#4211 = DEFINITIONAL_REPRESENTATION('',(#4212),#4216);+#4212 = LINE('',#4213,#4214);+#4213 = CARTESIAN_POINT('',(0.,-0.15));+#4214 = VECTOR('',#4215,1.);+#4215 = DIRECTION('',(1.,0.));+#4216 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4217 = PCURVE('',#3922,#4218);+#4218 = DEFINITIONAL_REPRESENTATION('',(#4219),#4223);+#4219 = LINE('',#4220,#4221);+#4220 = CARTESIAN_POINT('',(-0.227057976796,0.434182274245));+#4221 = VECTOR('',#4222,1.);+#4222 = DIRECTION('',(0.,1.));+#4223 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4224 = ORIENTED_EDGE('',*,*,#4225,.T.);+#4225 = EDGE_CURVE('',#4203,#4128,#4226,.T.);+#4226 = SURFACE_CURVE('',#4227,(#4231,#4238),.PCURVE_S1.);+#4227 = LINE('',#4228,#4229);+#4228 = CARTESIAN_POINT('',(-2.15,-0.475,0.445));+#4229 = VECTOR('',#4230,1.);+#4230 = DIRECTION('',(0.,1.,0.));+#4231 = PCURVE('',#4143,#4232);+#4232 = DEFINITIONAL_REPRESENTATION('',(#4233),#4237);+#4233 = LINE('',#4234,#4235);+#4234 = CARTESIAN_POINT('',(5.E-02,-0.15));+#4235 = VECTOR('',#4236,1.);+#4236 = DIRECTION('',(0.,1.));+#4237 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4238 = PCURVE('',#3894,#4239);+#4239 = DEFINITIONAL_REPRESENTATION('',(#4240),#4244);+#4240 = LINE('',#4241,#4242);+#4241 = CARTESIAN_POINT('',(0.,-0.15));+#4242 = VECTOR('',#4243,1.);+#4243 = DIRECTION('',(0.,1.));+#4244 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4245 = ORIENTED_EDGE('',*,*,#4127,.F.);+#4246 = ADVANCED_FACE('',(#4247),#4115,.F.);+#4247 = FACE_BOUND('',#4248,.F.);+#4248 = EDGE_LOOP('',(#4249,#4272,#4273,#4274));+#4249 = ORIENTED_EDGE('',*,*,#4250,.T.);+#4250 = EDGE_CURVE('',#4251,#4180,#4253,.T.);+#4251 = VERTEX_POINT('',#4252);+#4252 = CARTESIAN_POINT('',(-2.4875,-0.475,0.));+#4253 = SURFACE_CURVE('',#4254,(#4258,#4265),.PCURVE_S1.);+#4254 = LINE('',#4255,#4256);+#4255 = CARTESIAN_POINT('',(-2.4875,-0.475,0.));+#4256 = VECTOR('',#4257,1.);+#4257 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#4258 = PCURVE('',#4115,#4259);+#4259 = DEFINITIONAL_REPRESENTATION('',(#4260),#4264);+#4260 = LINE('',#4261,#4262);+#4261 = CARTESIAN_POINT('',(0.,-0.15));+#4262 = VECTOR('',#4263,1.);+#4263 = DIRECTION('',(1.,0.));+#4264 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4265 = PCURVE('',#3922,#4266);+#4266 = DEFINITIONAL_REPRESENTATION('',(#4267),#4271);+#4267 = LINE('',#4268,#4269);+#4268 = CARTESIAN_POINT('',(0.217942023204,0.146682274245));+#4269 = VECTOR('',#4270,1.);+#4270 = DIRECTION('',(-0.839949759337,0.542664170358));+#4271 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4272 = ORIENTED_EDGE('',*,*,#4179,.T.);+#4273 = ORIENTED_EDGE('',*,*,#4099,.F.);+#4274 = ORIENTED_EDGE('',*,*,#4275,.T.);+#4275 = EDGE_CURVE('',#4072,#4251,#4276,.T.);+#4276 = SURFACE_CURVE('',#4277,(#4281,#4288),.PCURVE_S1.);+#4277 = LINE('',#4278,#4279);+#4278 = CARTESIAN_POINT('',(-2.4875,-0.175,0.));+#4279 = VECTOR('',#4280,1.);+#4280 = DIRECTION('',(0.,-1.,0.));+#4281 = PCURVE('',#4115,#4282);+#4282 = DEFINITIONAL_REPRESENTATION('',(#4283),#4287);+#4283 = LINE('',#4284,#4285);+#4284 = CARTESIAN_POINT('',(0.,0.15));+#4285 = VECTOR('',#4286,1.);+#4286 = DIRECTION('',(0.,-1.));+#4287 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4288 = PCURVE('',#4087,#4289);+#4289 = DEFINITIONAL_REPRESENTATION('',(#4290),#4294);+#4290 = LINE('',#4291,#4292);+#4291 = CARTESIAN_POINT('',(0.7175,0.15));+#4292 = VECTOR('',#4293,1.);+#4293 = DIRECTION('',(0.,-1.));+#4294 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4295 = ADVANCED_FACE('',(#4296),#4087,.F.);+#4296 = FACE_BOUND('',#4297,.F.);+#4297 = EDGE_LOOP('',(#4298,#4321,#4322,#4323));+#4298 = ORIENTED_EDGE('',*,*,#4299,.T.);+#4299 = EDGE_CURVE('',#4300,#4251,#4302,.T.);+#4300 = VERTEX_POINT('',#4301);+#4301 = CARTESIAN_POINT('',(-3.205,-0.475,0.));+#4302 = SURFACE_CURVE('',#4303,(#4307,#4314),.PCURVE_S1.);+#4303 = LINE('',#4304,#4305);+#4304 = CARTESIAN_POINT('',(-3.205,-0.475,0.));+#4305 = VECTOR('',#4306,1.);+#4306 = DIRECTION('',(1.,0.,0.));+#4307 = PCURVE('',#4087,#4308);+#4308 = DEFINITIONAL_REPRESENTATION('',(#4309),#4313);+#4309 = LINE('',#4310,#4311);+#4310 = CARTESIAN_POINT('',(0.,-0.15));+#4311 = VECTOR('',#4312,1.);+#4312 = DIRECTION('',(1.,0.));+#4313 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4314 = PCURVE('',#3922,#4315);+#4315 = DEFINITIONAL_REPRESENTATION('',(#4316),#4320);+#4316 = LINE('',#4317,#4318);+#4317 = CARTESIAN_POINT('',(0.217942023204,-0.570817725755));+#4318 = VECTOR('',#4319,1.);+#4319 = DIRECTION('',(0.,1.));+#4320 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4321 = ORIENTED_EDGE('',*,*,#4275,.F.);+#4322 = ORIENTED_EDGE('',*,*,#4071,.F.);+#4323 = ORIENTED_EDGE('',*,*,#4324,.T.);+#4324 = EDGE_CURVE('',#4044,#4300,#4325,.T.);+#4325 = SURFACE_CURVE('',#4326,(#4330,#4337),.PCURVE_S1.);+#4326 = LINE('',#4327,#4328);+#4327 = CARTESIAN_POINT('',(-3.205,-0.175,0.));+#4328 = VECTOR('',#4329,1.);+#4329 = DIRECTION('',(0.,-1.,0.));+#4330 = PCURVE('',#4087,#4331);+#4331 = DEFINITIONAL_REPRESENTATION('',(#4332),#4336);+#4332 = LINE('',#4333,#4334);+#4333 = CARTESIAN_POINT('',(0.,0.15));+#4334 = VECTOR('',#4335,1.);+#4335 = DIRECTION('',(0.,-1.));+#4336 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4337 = PCURVE('',#4059,#4338);+#4338 = DEFINITIONAL_REPRESENTATION('',(#4339),#4343);+#4339 = LINE('',#4340,#4341);+#4340 = CARTESIAN_POINT('',(0.15,0.15));+#4341 = VECTOR('',#4342,1.);+#4342 = DIRECTION('',(0.,-1.));+#4343 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4344 = ADVANCED_FACE('',(#4345),#4059,.F.);+#4345 = FACE_BOUND('',#4346,.F.);+#4346 = EDGE_LOOP('',(#4347,#4370,#4371,#4372));+#4347 = ORIENTED_EDGE('',*,*,#4348,.T.);+#4348 = EDGE_CURVE('',#4349,#4300,#4351,.T.);+#4349 = VERTEX_POINT('',#4350);+#4350 = CARTESIAN_POINT('',(-3.205,-0.475,0.15));+#4351 = SURFACE_CURVE('',#4352,(#4356,#4363),.PCURVE_S1.);+#4352 = LINE('',#4353,#4354);+#4353 = CARTESIAN_POINT('',(-3.205,-0.475,0.15));+#4354 = VECTOR('',#4355,1.);+#4355 = DIRECTION('',(0.,0.,-1.));+#4356 = PCURVE('',#4059,#4357);+#4357 = DEFINITIONAL_REPRESENTATION('',(#4358),#4362);+#4358 = LINE('',#4359,#4360);+#4359 = CARTESIAN_POINT('',(0.,-0.15));+#4360 = VECTOR('',#4361,1.);+#4361 = DIRECTION('',(1.,0.));+#4362 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4363 = PCURVE('',#3922,#4364);+#4364 = DEFINITIONAL_REPRESENTATION('',(#4365),#4369);+#4365 = LINE('',#4366,#4367);+#4366 = CARTESIAN_POINT('',(6.7942023204E-02,-0.570817725755));+#4367 = VECTOR('',#4368,1.);+#4368 = DIRECTION('',(1.,0.));+#4369 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4370 = ORIENTED_EDGE('',*,*,#4324,.F.);+#4371 = ORIENTED_EDGE('',*,*,#4043,.F.);+#4372 = ORIENTED_EDGE('',*,*,#4373,.T.);+#4373 = EDGE_CURVE('',#4016,#4349,#4374,.T.);+#4374 = SURFACE_CURVE('',#4375,(#4379,#4386),.PCURVE_S1.);+#4375 = LINE('',#4376,#4377);+#4376 = CARTESIAN_POINT('',(-3.205,-0.175,0.15));+#4377 = VECTOR('',#4378,1.);+#4378 = DIRECTION('',(0.,-1.,0.));+#4379 = PCURVE('',#4059,#4380);+#4380 = DEFINITIONAL_REPRESENTATION('',(#4381),#4385);+#4381 = LINE('',#4382,#4383);+#4382 = CARTESIAN_POINT('',(0.,0.15));+#4383 = VECTOR('',#4384,1.);+#4384 = DIRECTION('',(0.,-1.));+#4385 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4386 = PCURVE('',#4031,#4387);+#4387 = DEFINITIONAL_REPRESENTATION('',(#4388),#4392);+#4388 = LINE('',#4389,#4390);+#4389 = CARTESIAN_POINT('',(0.5675,0.15));+#4390 = VECTOR('',#4391,1.);+#4391 = DIRECTION('',(0.,-1.));+#4392 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4393 = ADVANCED_FACE('',(#4394),#4031,.F.);+#4394 = FACE_BOUND('',#4395,.F.);+#4395 = EDGE_LOOP('',(#4396,#4419,#4420,#4421));+#4396 = ORIENTED_EDGE('',*,*,#4397,.T.);+#4397 = EDGE_CURVE('',#4398,#4349,#4400,.T.);+#4398 = VERTEX_POINT('',#4399);+#4399 = CARTESIAN_POINT('',(-2.6375,-0.475,0.15));+#4400 = SURFACE_CURVE('',#4401,(#4405,#4412),.PCURVE_S1.);+#4401 = LINE('',#4402,#4403);+#4402 = CARTESIAN_POINT('',(-2.6375,-0.475,0.15));+#4403 = VECTOR('',#4404,1.);+#4404 = DIRECTION('',(-1.,0.,0.));+#4405 = PCURVE('',#4031,#4406);+#4406 = DEFINITIONAL_REPRESENTATION('',(#4407),#4411);+#4407 = LINE('',#4408,#4409);+#4408 = CARTESIAN_POINT('',(0.,-0.15));+#4409 = VECTOR('',#4410,1.);+#4410 = DIRECTION('',(1.,0.));+#4411 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4412 = PCURVE('',#3922,#4413);+#4413 = DEFINITIONAL_REPRESENTATION('',(#4414),#4418);+#4414 = LINE('',#4415,#4416);+#4415 = CARTESIAN_POINT('',(6.7942023204E-02,-3.317725755E-03));+#4416 = VECTOR('',#4417,1.);+#4417 = DIRECTION('',(0.,-1.));+#4418 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4419 = ORIENTED_EDGE('',*,*,#4373,.F.);+#4420 = ORIENTED_EDGE('',*,*,#4015,.F.);+#4421 = ORIENTED_EDGE('',*,*,#4422,.T.);+#4422 = EDGE_CURVE('',#3993,#4398,#4423,.T.);+#4423 = SURFACE_CURVE('',#4424,(#4428,#4435),.PCURVE_S1.);+#4424 = LINE('',#4425,#4426);+#4425 = CARTESIAN_POINT('',(-2.6375,-0.175,0.15));+#4426 = VECTOR('',#4427,1.);+#4427 = DIRECTION('',(0.,-1.,0.));+#4428 = PCURVE('',#4031,#4429);+#4429 = DEFINITIONAL_REPRESENTATION('',(#4430),#4434);+#4430 = LINE('',#4431,#4432);+#4431 = CARTESIAN_POINT('',(0.,0.15));+#4432 = VECTOR('',#4433,1.);+#4433 = DIRECTION('',(0.,-1.));+#4434 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4435 = PCURVE('',#3950,#4436);+#4436 = DEFINITIONAL_REPRESENTATION('',(#4437),#4441);+#4437 = LINE('',#4438,#4439);+#4438 = CARTESIAN_POINT('',(0.529793591883,0.15));+#4439 = VECTOR('',#4440,1.);+#4440 = DIRECTION('',(-0.,-1.));+#4441 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4442 = ADVANCED_FACE('',(#4443),#3950,.F.);+#4443 = FACE_BOUND('',#4444,.F.);+#4444 = EDGE_LOOP('',(#4445,#4466,#4467,#4468));+#4445 = ORIENTED_EDGE('',*,*,#4446,.T.);+#4446 = EDGE_CURVE('',#3907,#4398,#4447,.T.);+#4447 = SURFACE_CURVE('',#4448,(#4452,#4459),.PCURVE_S1.);+#4448 = LINE('',#4449,#4450);+#4449 = CARTESIAN_POINT('',(-2.35,-0.475,0.595));+#4450 = VECTOR('',#4451,1.);+#4451 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#4452 = PCURVE('',#3950,#4453);+#4453 = DEFINITIONAL_REPRESENTATION('',(#4454),#4458);+#4454 = LINE('',#4455,#4456);+#4455 = CARTESIAN_POINT('',(-0.,-0.15));+#4456 = VECTOR('',#4457,1.);+#4457 = DIRECTION('',(1.,0.));+#4458 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4459 = PCURVE('',#3922,#4460);+#4460 = DEFINITIONAL_REPRESENTATION('',(#4461),#4465);+#4461 = LINE('',#4462,#4463);+#4462 = CARTESIAN_POINT('',(-0.377057976796,0.284182274245));+#4463 = VECTOR('',#4464,1.);+#4464 = DIRECTION('',(0.839949759337,-0.542664170358));+#4465 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4466 = ORIENTED_EDGE('',*,*,#4422,.F.);+#4467 = ORIENTED_EDGE('',*,*,#3992,.F.);+#4468 = ORIENTED_EDGE('',*,*,#3934,.T.);+#4469 = ADVANCED_FACE('',(#4470),#3922,.T.);+#4470 = FACE_BOUND('',#4471,.T.);+#4471 = EDGE_LOOP('',(#4472,#4473,#4474,#4475,#4476,#4477,#4478,#4479));+#4472 = ORIENTED_EDGE('',*,*,#3906,.T.);+#4473 = ORIENTED_EDGE('',*,*,#4446,.T.);+#4474 = ORIENTED_EDGE('',*,*,#4397,.T.);+#4475 = ORIENTED_EDGE('',*,*,#4348,.T.);+#4476 = ORIENTED_EDGE('',*,*,#4299,.T.);+#4477 = ORIENTED_EDGE('',*,*,#4250,.T.);+#4478 = ORIENTED_EDGE('',*,*,#4202,.T.);+#4479 = ORIENTED_EDGE('',*,*,#4480,.T.);+#4480 = EDGE_CURVE('',#4203,#3872,#4481,.T.);+#4481 = SURFACE_CURVE('',#4482,(#4486,#4493),.PCURVE_S1.);+#4482 = LINE('',#4483,#4484);+#4483 = CARTESIAN_POINT('',(-2.15,-0.475,0.445));+#4484 = VECTOR('',#4485,1.);+#4485 = DIRECTION('',(0.,0.,1.));+#4486 = PCURVE('',#3922,#4487);+#4487 = DEFINITIONAL_REPRESENTATION('',(#4488),#4492);+#4488 = LINE('',#4489,#4490);+#4489 = CARTESIAN_POINT('',(-0.227057976796,0.484182274245));+#4490 = VECTOR('',#4491,1.);+#4491 = DIRECTION('',(-1.,0.));+#4492 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4493 = PCURVE('',#3894,#4494);+#4494 = DEFINITIONAL_REPRESENTATION('',(#4495),#4499);+#4495 = LINE('',#4496,#4497);+#4496 = CARTESIAN_POINT('',(0.,-0.15));+#4497 = VECTOR('',#4498,1.);+#4498 = DIRECTION('',(1.,0.));+#4499 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4500 = ADVANCED_FACE('',(#4501),#3894,.F.);+#4501 = FACE_BOUND('',#4502,.F.);+#4502 = EDGE_LOOP('',(#4503,#4504,#4505,#4506));+#4503 = ORIENTED_EDGE('',*,*,#4225,.F.);+#4504 = ORIENTED_EDGE('',*,*,#4480,.T.);+#4505 = ORIENTED_EDGE('',*,*,#3871,.T.);+#4506 = ORIENTED_EDGE('',*,*,#4155,.F.);+#4507 = MANIFOLD_SOLID_BREP('',#4508);+#4508 = CLOSED_SHELL('',(#4509,#4629,#4817,#4888,#4937,#4986,#5035,#5084+ ,#5111,#5142));+#4509 = ADVANCED_FACE('',(#4510),#4524,.F.);+#4510 = FACE_BOUND('',#4511,.F.);+#4511 = EDGE_LOOP('',(#4512,#4547,#4575,#4603));+#4512 = ORIENTED_EDGE('',*,*,#4513,.F.);+#4513 = EDGE_CURVE('',#4514,#4516,#4518,.T.);+#4514 = VERTEX_POINT('',#4515);+#4515 = CARTESIAN_POINT('',(-2.15,-1.125,0.595));+#4516 = VERTEX_POINT('',#4517);+#4517 = CARTESIAN_POINT('',(-2.15,-0.825,0.595));+#4518 = SURFACE_CURVE('',#4519,(#4523,#4535),.PCURVE_S1.);+#4519 = LINE('',#4520,#4521);+#4520 = CARTESIAN_POINT('',(-2.15,-1.125,0.595));+#4521 = VECTOR('',#4522,1.);+#4522 = DIRECTION('',(0.,1.,0.));+#4523 = PCURVE('',#4524,#4529);+#4524 = PLANE('',#4525);+#4525 = AXIS2_PLACEMENT_3D('',#4526,#4527,#4528);+#4526 = CARTESIAN_POINT('',(-2.15,-0.975,0.595));+#4527 = DIRECTION('',(-0.,-0.,-1.));+#4528 = DIRECTION('',(-1.,0.,0.));+#4529 = DEFINITIONAL_REPRESENTATION('',(#4530),#4534);+#4530 = LINE('',#4531,#4532);+#4531 = CARTESIAN_POINT('',(0.,-0.15));+#4532 = VECTOR('',#4533,1.);+#4533 = DIRECTION('',(0.,1.));+#4534 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4535 = PCURVE('',#4536,#4541);+#4536 = PLANE('',#4537);+#4537 = AXIS2_PLACEMENT_3D('',#4538,#4539,#4540);+#4538 = CARTESIAN_POINT('',(-2.15,-0.975,0.445));+#4539 = DIRECTION('',(-1.,0.,0.));+#4540 = DIRECTION('',(0.,0.,1.));+#4541 = DEFINITIONAL_REPRESENTATION('',(#4542),#4546);+#4542 = LINE('',#4543,#4544);+#4543 = CARTESIAN_POINT('',(0.15,-0.15));+#4544 = VECTOR('',#4545,1.);+#4545 = DIRECTION('',(0.,1.));+#4546 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4547 = ORIENTED_EDGE('',*,*,#4548,.T.);+#4548 = EDGE_CURVE('',#4514,#4549,#4551,.T.);+#4549 = VERTEX_POINT('',#4550);+#4550 = CARTESIAN_POINT('',(-2.35,-1.125,0.595));+#4551 = SURFACE_CURVE('',#4552,(#4556,#4563),.PCURVE_S1.);+#4552 = LINE('',#4553,#4554);+#4553 = CARTESIAN_POINT('',(-2.15,-1.125,0.595));+#4554 = VECTOR('',#4555,1.);+#4555 = DIRECTION('',(-1.,0.,0.));+#4556 = PCURVE('',#4524,#4557);+#4557 = DEFINITIONAL_REPRESENTATION('',(#4558),#4562);+#4558 = LINE('',#4559,#4560);+#4559 = CARTESIAN_POINT('',(0.,-0.15));+#4560 = VECTOR('',#4561,1.);+#4561 = DIRECTION('',(1.,0.));+#4562 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4563 = PCURVE('',#4564,#4569);+#4564 = PLANE('',#4565);+#4565 = AXIS2_PLACEMENT_3D('',#4566,#4567,#4568);+#4566 = CARTESIAN_POINT('',(-2.634182274245,-1.125,0.217942023204));+#4567 = DIRECTION('',(-0.,-1.,-0.));+#4568 = DIRECTION('',(0.,0.,-1.));+#4569 = DEFINITIONAL_REPRESENTATION('',(#4570),#4574);+#4570 = LINE('',#4571,#4572);+#4571 = CARTESIAN_POINT('',(-0.377057976796,0.484182274245));+#4572 = VECTOR('',#4573,1.);+#4573 = DIRECTION('',(0.,-1.));+#4574 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4575 = ORIENTED_EDGE('',*,*,#4576,.F.);+#4576 = EDGE_CURVE('',#4577,#4549,#4579,.T.);+#4577 = VERTEX_POINT('',#4578);+#4578 = CARTESIAN_POINT('',(-2.35,-0.825,0.595));+#4579 = SURFACE_CURVE('',#4580,(#4584,#4591),.PCURVE_S1.);+#4580 = LINE('',#4581,#4582);+#4581 = CARTESIAN_POINT('',(-2.35,-0.825,0.595));+#4582 = VECTOR('',#4583,1.);+#4583 = DIRECTION('',(0.,-1.,0.));+#4584 = PCURVE('',#4524,#4585);+#4585 = DEFINITIONAL_REPRESENTATION('',(#4586),#4590);+#4586 = LINE('',#4587,#4588);+#4587 = CARTESIAN_POINT('',(0.2,0.15));+#4588 = VECTOR('',#4589,1.);+#4589 = DIRECTION('',(0.,-1.));+#4590 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4591 = PCURVE('',#4592,#4597);+#4592 = PLANE('',#4593);+#4593 = AXIS2_PLACEMENT_3D('',#4594,#4595,#4596);+#4594 = CARTESIAN_POINT('',(-2.35,-0.975,0.595));+#4595 = DIRECTION('',(0.839949759337,0.,-0.542664170358));+#4596 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#4597 = DEFINITIONAL_REPRESENTATION('',(#4598),#4602);+#4598 = LINE('',#4599,#4600);+#4599 = CARTESIAN_POINT('',(0.,0.15));+#4600 = VECTOR('',#4601,1.);+#4601 = DIRECTION('',(-0.,-1.));+#4602 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4603 = ORIENTED_EDGE('',*,*,#4604,.F.);+#4604 = EDGE_CURVE('',#4516,#4577,#4605,.T.);+#4605 = SURFACE_CURVE('',#4606,(#4610,#4617),.PCURVE_S1.);+#4606 = LINE('',#4607,#4608);+#4607 = CARTESIAN_POINT('',(-2.15,-0.825,0.595));+#4608 = VECTOR('',#4609,1.);+#4609 = DIRECTION('',(-1.,0.,0.));+#4610 = PCURVE('',#4524,#4611);+#4611 = DEFINITIONAL_REPRESENTATION('',(#4612),#4616);+#4612 = LINE('',#4613,#4614);+#4613 = CARTESIAN_POINT('',(0.,0.15));+#4614 = VECTOR('',#4615,1.);+#4615 = DIRECTION('',(1.,0.));+#4616 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4617 = PCURVE('',#4618,#4623);+#4618 = PLANE('',#4619);+#4619 = AXIS2_PLACEMENT_3D('',#4620,#4621,#4622);+#4620 = CARTESIAN_POINT('',(-2.634182274245,-0.825,0.217942023204));+#4621 = DIRECTION('',(-0.,-1.,-0.));+#4622 = DIRECTION('',(0.,0.,-1.));+#4623 = DEFINITIONAL_REPRESENTATION('',(#4624),#4628);+#4624 = LINE('',#4625,#4626);+#4625 = CARTESIAN_POINT('',(-0.377057976796,0.484182274245));+#4626 = VECTOR('',#4627,1.);+#4627 = DIRECTION('',(0.,-1.));+#4628 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4629 = ADVANCED_FACE('',(#4630),#4618,.F.);+#4630 = FACE_BOUND('',#4631,.F.);+#4631 = EDGE_LOOP('',(#4632,#4633,#4656,#4684,#4712,#4740,#4768,#4796));+#4632 = ORIENTED_EDGE('',*,*,#4604,.T.);+#4633 = ORIENTED_EDGE('',*,*,#4634,.T.);+#4634 = EDGE_CURVE('',#4577,#4635,#4637,.T.);+#4635 = VERTEX_POINT('',#4636);+#4636 = CARTESIAN_POINT('',(-2.6375,-0.825,0.15));+#4637 = SURFACE_CURVE('',#4638,(#4642,#4649),.PCURVE_S1.);+#4638 = LINE('',#4639,#4640);+#4639 = CARTESIAN_POINT('',(-2.35,-0.825,0.595));+#4640 = VECTOR('',#4641,1.);+#4641 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#4642 = PCURVE('',#4618,#4643);+#4643 = DEFINITIONAL_REPRESENTATION('',(#4644),#4648);+#4644 = LINE('',#4645,#4646);+#4645 = CARTESIAN_POINT('',(-0.377057976796,0.284182274245));+#4646 = VECTOR('',#4647,1.);+#4647 = DIRECTION('',(0.839949759337,-0.542664170358));+#4648 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4649 = PCURVE('',#4592,#4650);+#4650 = DEFINITIONAL_REPRESENTATION('',(#4651),#4655);+#4651 = LINE('',#4652,#4653);+#4652 = CARTESIAN_POINT('',(0.,0.15));+#4653 = VECTOR('',#4654,1.);+#4654 = DIRECTION('',(1.,0.));+#4655 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4656 = ORIENTED_EDGE('',*,*,#4657,.T.);+#4657 = EDGE_CURVE('',#4635,#4658,#4660,.T.);+#4658 = VERTEX_POINT('',#4659);+#4659 = CARTESIAN_POINT('',(-3.205,-0.825,0.15));+#4660 = SURFACE_CURVE('',#4661,(#4665,#4672),.PCURVE_S1.);+#4661 = LINE('',#4662,#4663);+#4662 = CARTESIAN_POINT('',(-2.6375,-0.825,0.15));+#4663 = VECTOR('',#4664,1.);+#4664 = DIRECTION('',(-1.,0.,0.));+#4665 = PCURVE('',#4618,#4666);+#4666 = DEFINITIONAL_REPRESENTATION('',(#4667),#4671);+#4667 = LINE('',#4668,#4669);+#4668 = CARTESIAN_POINT('',(6.7942023204E-02,-3.317725755E-03));+#4669 = VECTOR('',#4670,1.);+#4670 = DIRECTION('',(0.,-1.));+#4671 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4672 = PCURVE('',#4673,#4678);+#4673 = PLANE('',#4674);+#4674 = AXIS2_PLACEMENT_3D('',#4675,#4676,#4677);+#4675 = CARTESIAN_POINT('',(-2.6375,-0.975,0.15));+#4676 = DIRECTION('',(-0.,-0.,-1.));+#4677 = DIRECTION('',(-1.,0.,0.));+#4678 = DEFINITIONAL_REPRESENTATION('',(#4679),#4683);+#4679 = LINE('',#4680,#4681);+#4680 = CARTESIAN_POINT('',(0.,0.15));+#4681 = VECTOR('',#4682,1.);+#4682 = DIRECTION('',(1.,0.));+#4683 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4684 = ORIENTED_EDGE('',*,*,#4685,.T.);+#4685 = EDGE_CURVE('',#4658,#4686,#4688,.T.);+#4686 = VERTEX_POINT('',#4687);+#4687 = CARTESIAN_POINT('',(-3.205,-0.825,0.));+#4688 = SURFACE_CURVE('',#4689,(#4693,#4700),.PCURVE_S1.);+#4689 = LINE('',#4690,#4691);+#4690 = CARTESIAN_POINT('',(-3.205,-0.825,0.15));+#4691 = VECTOR('',#4692,1.);+#4692 = DIRECTION('',(0.,0.,-1.));+#4693 = PCURVE('',#4618,#4694);+#4694 = DEFINITIONAL_REPRESENTATION('',(#4695),#4699);+#4695 = LINE('',#4696,#4697);+#4696 = CARTESIAN_POINT('',(6.7942023204E-02,-0.570817725755));+#4697 = VECTOR('',#4698,1.);+#4698 = DIRECTION('',(1.,0.));+#4699 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4700 = PCURVE('',#4701,#4706);+#4701 = PLANE('',#4702);+#4702 = AXIS2_PLACEMENT_3D('',#4703,#4704,#4705);+#4703 = CARTESIAN_POINT('',(-3.205,-0.975,0.15));+#4704 = DIRECTION('',(1.,0.,0.));+#4705 = DIRECTION('',(0.,0.,-1.));+#4706 = DEFINITIONAL_REPRESENTATION('',(#4707),#4711);+#4707 = LINE('',#4708,#4709);+#4708 = CARTESIAN_POINT('',(0.,0.15));+#4709 = VECTOR('',#4710,1.);+#4710 = DIRECTION('',(1.,0.));+#4711 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4712 = ORIENTED_EDGE('',*,*,#4713,.T.);+#4713 = EDGE_CURVE('',#4686,#4714,#4716,.T.);+#4714 = VERTEX_POINT('',#4715);+#4715 = CARTESIAN_POINT('',(-2.4875,-0.825,0.));+#4716 = SURFACE_CURVE('',#4717,(#4721,#4728),.PCURVE_S1.);+#4717 = LINE('',#4718,#4719);+#4718 = CARTESIAN_POINT('',(-3.205,-0.825,0.));+#4719 = VECTOR('',#4720,1.);+#4720 = DIRECTION('',(1.,0.,0.));+#4721 = PCURVE('',#4618,#4722);+#4722 = DEFINITIONAL_REPRESENTATION('',(#4723),#4727);+#4723 = LINE('',#4724,#4725);+#4724 = CARTESIAN_POINT('',(0.217942023204,-0.570817725755));+#4725 = VECTOR('',#4726,1.);+#4726 = DIRECTION('',(0.,1.));+#4727 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4728 = PCURVE('',#4729,#4734);+#4729 = PLANE('',#4730);+#4730 = AXIS2_PLACEMENT_3D('',#4731,#4732,#4733);+#4731 = CARTESIAN_POINT('',(-3.205,-0.975,0.));+#4732 = DIRECTION('',(0.,0.,1.));+#4733 = DIRECTION('',(1.,0.,0.));+#4734 = DEFINITIONAL_REPRESENTATION('',(#4735),#4739);+#4735 = LINE('',#4736,#4737);+#4736 = CARTESIAN_POINT('',(0.,0.15));+#4737 = VECTOR('',#4738,1.);+#4738 = DIRECTION('',(1.,0.));+#4739 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4740 = ORIENTED_EDGE('',*,*,#4741,.T.);+#4741 = EDGE_CURVE('',#4714,#4742,#4744,.T.);+#4742 = VERTEX_POINT('',#4743);+#4743 = CARTESIAN_POINT('',(-2.2,-0.825,0.445));+#4744 = SURFACE_CURVE('',#4745,(#4749,#4756),.PCURVE_S1.);+#4745 = LINE('',#4746,#4747);+#4746 = CARTESIAN_POINT('',(-2.4875,-0.825,0.));+#4747 = VECTOR('',#4748,1.);+#4748 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#4749 = PCURVE('',#4618,#4750);+#4750 = DEFINITIONAL_REPRESENTATION('',(#4751),#4755);+#4751 = LINE('',#4752,#4753);+#4752 = CARTESIAN_POINT('',(0.217942023204,0.146682274245));+#4753 = VECTOR('',#4754,1.);+#4754 = DIRECTION('',(-0.839949759337,0.542664170358));+#4755 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4756 = PCURVE('',#4757,#4762);+#4757 = PLANE('',#4758);+#4758 = AXIS2_PLACEMENT_3D('',#4759,#4760,#4761);+#4759 = CARTESIAN_POINT('',(-2.4875,-0.975,0.));+#4760 = DIRECTION('',(-0.839949759337,0.,0.542664170358));+#4761 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#4762 = DEFINITIONAL_REPRESENTATION('',(#4763),#4767);+#4763 = LINE('',#4764,#4765);+#4764 = CARTESIAN_POINT('',(0.,0.15));+#4765 = VECTOR('',#4766,1.);+#4766 = DIRECTION('',(1.,0.));+#4767 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4768 = ORIENTED_EDGE('',*,*,#4769,.T.);+#4769 = EDGE_CURVE('',#4742,#4770,#4772,.T.);+#4770 = VERTEX_POINT('',#4771);+#4771 = CARTESIAN_POINT('',(-2.15,-0.825,0.445));+#4772 = SURFACE_CURVE('',#4773,(#4777,#4784),.PCURVE_S1.);+#4773 = LINE('',#4774,#4775);+#4774 = CARTESIAN_POINT('',(-2.2,-0.825,0.445));+#4775 = VECTOR('',#4776,1.);+#4776 = DIRECTION('',(1.,0.,0.));+#4777 = PCURVE('',#4618,#4778);+#4778 = DEFINITIONAL_REPRESENTATION('',(#4779),#4783);+#4779 = LINE('',#4780,#4781);+#4780 = CARTESIAN_POINT('',(-0.227057976796,0.434182274245));+#4781 = VECTOR('',#4782,1.);+#4782 = DIRECTION('',(0.,1.));+#4783 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4784 = PCURVE('',#4785,#4790);+#4785 = PLANE('',#4786);+#4786 = AXIS2_PLACEMENT_3D('',#4787,#4788,#4789);+#4787 = CARTESIAN_POINT('',(-2.2,-0.975,0.445));+#4788 = DIRECTION('',(0.,0.,1.));+#4789 = DIRECTION('',(1.,0.,0.));+#4790 = DEFINITIONAL_REPRESENTATION('',(#4791),#4795);+#4791 = LINE('',#4792,#4793);+#4792 = CARTESIAN_POINT('',(0.,0.15));+#4793 = VECTOR('',#4794,1.);+#4794 = DIRECTION('',(1.,0.));+#4795 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4796 = ORIENTED_EDGE('',*,*,#4797,.T.);+#4797 = EDGE_CURVE('',#4770,#4516,#4798,.T.);+#4798 = SURFACE_CURVE('',#4799,(#4803,#4810),.PCURVE_S1.);+#4799 = LINE('',#4800,#4801);+#4800 = CARTESIAN_POINT('',(-2.15,-0.825,0.445));+#4801 = VECTOR('',#4802,1.);+#4802 = DIRECTION('',(0.,0.,1.));+#4803 = PCURVE('',#4618,#4804);+#4804 = DEFINITIONAL_REPRESENTATION('',(#4805),#4809);+#4805 = LINE('',#4806,#4807);+#4806 = CARTESIAN_POINT('',(-0.227057976796,0.484182274245));+#4807 = VECTOR('',#4808,1.);+#4808 = DIRECTION('',(-1.,0.));+#4809 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4810 = PCURVE('',#4536,#4811);+#4811 = DEFINITIONAL_REPRESENTATION('',(#4812),#4816);+#4812 = LINE('',#4813,#4814);+#4813 = CARTESIAN_POINT('',(0.,0.15));+#4814 = VECTOR('',#4815,1.);+#4815 = DIRECTION('',(1.,0.));+#4816 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4817 = ADVANCED_FACE('',(#4818),#4785,.F.);+#4818 = FACE_BOUND('',#4819,.F.);+#4819 = EDGE_LOOP('',(#4820,#4843,#4866,#4887));+#4820 = ORIENTED_EDGE('',*,*,#4821,.F.);+#4821 = EDGE_CURVE('',#4822,#4742,#4824,.T.);+#4822 = VERTEX_POINT('',#4823);+#4823 = CARTESIAN_POINT('',(-2.2,-1.125,0.445));+#4824 = SURFACE_CURVE('',#4825,(#4829,#4836),.PCURVE_S1.);+#4825 = LINE('',#4826,#4827);+#4826 = CARTESIAN_POINT('',(-2.2,-1.125,0.445));+#4827 = VECTOR('',#4828,1.);+#4828 = DIRECTION('',(0.,1.,0.));+#4829 = PCURVE('',#4785,#4830);+#4830 = DEFINITIONAL_REPRESENTATION('',(#4831),#4835);+#4831 = LINE('',#4832,#4833);+#4832 = CARTESIAN_POINT('',(0.,-0.15));+#4833 = VECTOR('',#4834,1.);+#4834 = DIRECTION('',(0.,1.));+#4835 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4836 = PCURVE('',#4757,#4837);+#4837 = DEFINITIONAL_REPRESENTATION('',(#4838),#4842);+#4838 = LINE('',#4839,#4840);+#4839 = CARTESIAN_POINT('',(0.529793591883,-0.15));+#4840 = VECTOR('',#4841,1.);+#4841 = DIRECTION('',(0.,1.));+#4842 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4843 = ORIENTED_EDGE('',*,*,#4844,.T.);+#4844 = EDGE_CURVE('',#4822,#4845,#4847,.T.);+#4845 = VERTEX_POINT('',#4846);+#4846 = CARTESIAN_POINT('',(-2.15,-1.125,0.445));+#4847 = SURFACE_CURVE('',#4848,(#4852,#4859),.PCURVE_S1.);+#4848 = LINE('',#4849,#4850);+#4849 = CARTESIAN_POINT('',(-2.2,-1.125,0.445));+#4850 = VECTOR('',#4851,1.);+#4851 = DIRECTION('',(1.,0.,0.));+#4852 = PCURVE('',#4785,#4853);+#4853 = DEFINITIONAL_REPRESENTATION('',(#4854),#4858);+#4854 = LINE('',#4855,#4856);+#4855 = CARTESIAN_POINT('',(0.,-0.15));+#4856 = VECTOR('',#4857,1.);+#4857 = DIRECTION('',(1.,0.));+#4858 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4859 = PCURVE('',#4564,#4860);+#4860 = DEFINITIONAL_REPRESENTATION('',(#4861),#4865);+#4861 = LINE('',#4862,#4863);+#4862 = CARTESIAN_POINT('',(-0.227057976796,0.434182274245));+#4863 = VECTOR('',#4864,1.);+#4864 = DIRECTION('',(0.,1.));+#4865 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4866 = ORIENTED_EDGE('',*,*,#4867,.T.);+#4867 = EDGE_CURVE('',#4845,#4770,#4868,.T.);+#4868 = SURFACE_CURVE('',#4869,(#4873,#4880),.PCURVE_S1.);+#4869 = LINE('',#4870,#4871);+#4870 = CARTESIAN_POINT('',(-2.15,-1.125,0.445));+#4871 = VECTOR('',#4872,1.);+#4872 = DIRECTION('',(0.,1.,0.));+#4873 = PCURVE('',#4785,#4874);+#4874 = DEFINITIONAL_REPRESENTATION('',(#4875),#4879);+#4875 = LINE('',#4876,#4877);+#4876 = CARTESIAN_POINT('',(5.E-02,-0.15));+#4877 = VECTOR('',#4878,1.);+#4878 = DIRECTION('',(0.,1.));+#4879 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4880 = PCURVE('',#4536,#4881);+#4881 = DEFINITIONAL_REPRESENTATION('',(#4882),#4886);+#4882 = LINE('',#4883,#4884);+#4883 = CARTESIAN_POINT('',(0.,-0.15));+#4884 = VECTOR('',#4885,1.);+#4885 = DIRECTION('',(0.,1.));+#4886 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4887 = ORIENTED_EDGE('',*,*,#4769,.F.);+#4888 = ADVANCED_FACE('',(#4889),#4757,.F.);+#4889 = FACE_BOUND('',#4890,.F.);+#4890 = EDGE_LOOP('',(#4891,#4914,#4915,#4916));+#4891 = ORIENTED_EDGE('',*,*,#4892,.T.);+#4892 = EDGE_CURVE('',#4893,#4822,#4895,.T.);+#4893 = VERTEX_POINT('',#4894);+#4894 = CARTESIAN_POINT('',(-2.4875,-1.125,0.));+#4895 = SURFACE_CURVE('',#4896,(#4900,#4907),.PCURVE_S1.);+#4896 = LINE('',#4897,#4898);+#4897 = CARTESIAN_POINT('',(-2.4875,-1.125,0.));+#4898 = VECTOR('',#4899,1.);+#4899 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#4900 = PCURVE('',#4757,#4901);+#4901 = DEFINITIONAL_REPRESENTATION('',(#4902),#4906);+#4902 = LINE('',#4903,#4904);+#4903 = CARTESIAN_POINT('',(0.,-0.15));+#4904 = VECTOR('',#4905,1.);+#4905 = DIRECTION('',(1.,0.));+#4906 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4907 = PCURVE('',#4564,#4908);+#4908 = DEFINITIONAL_REPRESENTATION('',(#4909),#4913);+#4909 = LINE('',#4910,#4911);+#4910 = CARTESIAN_POINT('',(0.217942023204,0.146682274245));+#4911 = VECTOR('',#4912,1.);+#4912 = DIRECTION('',(-0.839949759337,0.542664170358));+#4913 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4914 = ORIENTED_EDGE('',*,*,#4821,.T.);+#4915 = ORIENTED_EDGE('',*,*,#4741,.F.);+#4916 = ORIENTED_EDGE('',*,*,#4917,.T.);+#4917 = EDGE_CURVE('',#4714,#4893,#4918,.T.);+#4918 = SURFACE_CURVE('',#4919,(#4923,#4930),.PCURVE_S1.);+#4919 = LINE('',#4920,#4921);+#4920 = CARTESIAN_POINT('',(-2.4875,-0.825,0.));+#4921 = VECTOR('',#4922,1.);+#4922 = DIRECTION('',(0.,-1.,0.));+#4923 = PCURVE('',#4757,#4924);+#4924 = DEFINITIONAL_REPRESENTATION('',(#4925),#4929);+#4925 = LINE('',#4926,#4927);+#4926 = CARTESIAN_POINT('',(0.,0.15));+#4927 = VECTOR('',#4928,1.);+#4928 = DIRECTION('',(0.,-1.));+#4929 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4930 = PCURVE('',#4729,#4931);+#4931 = DEFINITIONAL_REPRESENTATION('',(#4932),#4936);+#4932 = LINE('',#4933,#4934);+#4933 = CARTESIAN_POINT('',(0.7175,0.15));+#4934 = VECTOR('',#4935,1.);+#4935 = DIRECTION('',(0.,-1.));+#4936 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4937 = ADVANCED_FACE('',(#4938),#4729,.F.);+#4938 = FACE_BOUND('',#4939,.F.);+#4939 = EDGE_LOOP('',(#4940,#4963,#4964,#4965));+#4940 = ORIENTED_EDGE('',*,*,#4941,.T.);+#4941 = EDGE_CURVE('',#4942,#4893,#4944,.T.);+#4942 = VERTEX_POINT('',#4943);+#4943 = CARTESIAN_POINT('',(-3.205,-1.125,0.));+#4944 = SURFACE_CURVE('',#4945,(#4949,#4956),.PCURVE_S1.);+#4945 = LINE('',#4946,#4947);+#4946 = CARTESIAN_POINT('',(-3.205,-1.125,0.));+#4947 = VECTOR('',#4948,1.);+#4948 = DIRECTION('',(1.,0.,0.));+#4949 = PCURVE('',#4729,#4950);+#4950 = DEFINITIONAL_REPRESENTATION('',(#4951),#4955);+#4951 = LINE('',#4952,#4953);+#4952 = CARTESIAN_POINT('',(0.,-0.15));+#4953 = VECTOR('',#4954,1.);+#4954 = DIRECTION('',(1.,0.));+#4955 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4956 = PCURVE('',#4564,#4957);+#4957 = DEFINITIONAL_REPRESENTATION('',(#4958),#4962);+#4958 = LINE('',#4959,#4960);+#4959 = CARTESIAN_POINT('',(0.217942023204,-0.570817725755));+#4960 = VECTOR('',#4961,1.);+#4961 = DIRECTION('',(0.,1.));+#4962 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4963 = ORIENTED_EDGE('',*,*,#4917,.F.);+#4964 = ORIENTED_EDGE('',*,*,#4713,.F.);+#4965 = ORIENTED_EDGE('',*,*,#4966,.T.);+#4966 = EDGE_CURVE('',#4686,#4942,#4967,.T.);+#4967 = SURFACE_CURVE('',#4968,(#4972,#4979),.PCURVE_S1.);+#4968 = LINE('',#4969,#4970);+#4969 = CARTESIAN_POINT('',(-3.205,-0.825,0.));+#4970 = VECTOR('',#4971,1.);+#4971 = DIRECTION('',(0.,-1.,0.));+#4972 = PCURVE('',#4729,#4973);+#4973 = DEFINITIONAL_REPRESENTATION('',(#4974),#4978);+#4974 = LINE('',#4975,#4976);+#4975 = CARTESIAN_POINT('',(0.,0.15));+#4976 = VECTOR('',#4977,1.);+#4977 = DIRECTION('',(0.,-1.));+#4978 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4979 = PCURVE('',#4701,#4980);+#4980 = DEFINITIONAL_REPRESENTATION('',(#4981),#4985);+#4981 = LINE('',#4982,#4983);+#4982 = CARTESIAN_POINT('',(0.15,0.15));+#4983 = VECTOR('',#4984,1.);+#4984 = DIRECTION('',(0.,-1.));+#4985 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4986 = ADVANCED_FACE('',(#4987),#4701,.F.);+#4987 = FACE_BOUND('',#4988,.F.);+#4988 = EDGE_LOOP('',(#4989,#5012,#5013,#5014));+#4989 = ORIENTED_EDGE('',*,*,#4990,.T.);+#4990 = EDGE_CURVE('',#4991,#4942,#4993,.T.);+#4991 = VERTEX_POINT('',#4992);+#4992 = CARTESIAN_POINT('',(-3.205,-1.125,0.15));+#4993 = SURFACE_CURVE('',#4994,(#4998,#5005),.PCURVE_S1.);+#4994 = LINE('',#4995,#4996);+#4995 = CARTESIAN_POINT('',(-3.205,-1.125,0.15));+#4996 = VECTOR('',#4997,1.);+#4997 = DIRECTION('',(0.,0.,-1.));+#4998 = PCURVE('',#4701,#4999);+#4999 = DEFINITIONAL_REPRESENTATION('',(#5000),#5004);+#5000 = LINE('',#5001,#5002);+#5001 = CARTESIAN_POINT('',(0.,-0.15));+#5002 = VECTOR('',#5003,1.);+#5003 = DIRECTION('',(1.,0.));+#5004 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5005 = PCURVE('',#4564,#5006);+#5006 = DEFINITIONAL_REPRESENTATION('',(#5007),#5011);+#5007 = LINE('',#5008,#5009);+#5008 = CARTESIAN_POINT('',(6.7942023204E-02,-0.570817725755));+#5009 = VECTOR('',#5010,1.);+#5010 = DIRECTION('',(1.,0.));+#5011 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5012 = ORIENTED_EDGE('',*,*,#4966,.F.);+#5013 = ORIENTED_EDGE('',*,*,#4685,.F.);+#5014 = ORIENTED_EDGE('',*,*,#5015,.T.);+#5015 = EDGE_CURVE('',#4658,#4991,#5016,.T.);+#5016 = SURFACE_CURVE('',#5017,(#5021,#5028),.PCURVE_S1.);+#5017 = LINE('',#5018,#5019);+#5018 = CARTESIAN_POINT('',(-3.205,-0.825,0.15));+#5019 = VECTOR('',#5020,1.);+#5020 = DIRECTION('',(0.,-1.,0.));+#5021 = PCURVE('',#4701,#5022);+#5022 = DEFINITIONAL_REPRESENTATION('',(#5023),#5027);+#5023 = LINE('',#5024,#5025);+#5024 = CARTESIAN_POINT('',(0.,0.15));+#5025 = VECTOR('',#5026,1.);+#5026 = DIRECTION('',(0.,-1.));+#5027 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5028 = PCURVE('',#4673,#5029);+#5029 = DEFINITIONAL_REPRESENTATION('',(#5030),#5034);+#5030 = LINE('',#5031,#5032);+#5031 = CARTESIAN_POINT('',(0.5675,0.15));+#5032 = VECTOR('',#5033,1.);+#5033 = DIRECTION('',(0.,-1.));+#5034 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5035 = ADVANCED_FACE('',(#5036),#4673,.F.);+#5036 = FACE_BOUND('',#5037,.F.);+#5037 = EDGE_LOOP('',(#5038,#5061,#5062,#5063));+#5038 = ORIENTED_EDGE('',*,*,#5039,.T.);+#5039 = EDGE_CURVE('',#5040,#4991,#5042,.T.);+#5040 = VERTEX_POINT('',#5041);+#5041 = CARTESIAN_POINT('',(-2.6375,-1.125,0.15));+#5042 = SURFACE_CURVE('',#5043,(#5047,#5054),.PCURVE_S1.);+#5043 = LINE('',#5044,#5045);+#5044 = CARTESIAN_POINT('',(-2.6375,-1.125,0.15));+#5045 = VECTOR('',#5046,1.);+#5046 = DIRECTION('',(-1.,0.,0.));+#5047 = PCURVE('',#4673,#5048);+#5048 = DEFINITIONAL_REPRESENTATION('',(#5049),#5053);+#5049 = LINE('',#5050,#5051);+#5050 = CARTESIAN_POINT('',(0.,-0.15));+#5051 = VECTOR('',#5052,1.);+#5052 = DIRECTION('',(1.,0.));+#5053 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5054 = PCURVE('',#4564,#5055);+#5055 = DEFINITIONAL_REPRESENTATION('',(#5056),#5060);+#5056 = LINE('',#5057,#5058);+#5057 = CARTESIAN_POINT('',(6.7942023204E-02,-3.317725755E-03));+#5058 = VECTOR('',#5059,1.);+#5059 = DIRECTION('',(0.,-1.));+#5060 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5061 = ORIENTED_EDGE('',*,*,#5015,.F.);+#5062 = ORIENTED_EDGE('',*,*,#4657,.F.);+#5063 = ORIENTED_EDGE('',*,*,#5064,.T.);+#5064 = EDGE_CURVE('',#4635,#5040,#5065,.T.);+#5065 = SURFACE_CURVE('',#5066,(#5070,#5077),.PCURVE_S1.);+#5066 = LINE('',#5067,#5068);+#5067 = CARTESIAN_POINT('',(-2.6375,-0.825,0.15));+#5068 = VECTOR('',#5069,1.);+#5069 = DIRECTION('',(0.,-1.,0.));+#5070 = PCURVE('',#4673,#5071);+#5071 = DEFINITIONAL_REPRESENTATION('',(#5072),#5076);+#5072 = LINE('',#5073,#5074);+#5073 = CARTESIAN_POINT('',(0.,0.15));+#5074 = VECTOR('',#5075,1.);+#5075 = DIRECTION('',(0.,-1.));+#5076 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5077 = PCURVE('',#4592,#5078);+#5078 = DEFINITIONAL_REPRESENTATION('',(#5079),#5083);+#5079 = LINE('',#5080,#5081);+#5080 = CARTESIAN_POINT('',(0.529793591883,0.15));+#5081 = VECTOR('',#5082,1.);+#5082 = DIRECTION('',(-0.,-1.));+#5083 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5084 = ADVANCED_FACE('',(#5085),#4592,.F.);+#5085 = FACE_BOUND('',#5086,.F.);+#5086 = EDGE_LOOP('',(#5087,#5108,#5109,#5110));+#5087 = ORIENTED_EDGE('',*,*,#5088,.T.);+#5088 = EDGE_CURVE('',#4549,#5040,#5089,.T.);+#5089 = SURFACE_CURVE('',#5090,(#5094,#5101),.PCURVE_S1.);+#5090 = LINE('',#5091,#5092);+#5091 = CARTESIAN_POINT('',(-2.35,-1.125,0.595));+#5092 = VECTOR('',#5093,1.);+#5093 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#5094 = PCURVE('',#4592,#5095);+#5095 = DEFINITIONAL_REPRESENTATION('',(#5096),#5100);+#5096 = LINE('',#5097,#5098);+#5097 = CARTESIAN_POINT('',(-0.,-0.15));+#5098 = VECTOR('',#5099,1.);+#5099 = DIRECTION('',(1.,0.));+#5100 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5101 = PCURVE('',#4564,#5102);+#5102 = DEFINITIONAL_REPRESENTATION('',(#5103),#5107);+#5103 = LINE('',#5104,#5105);+#5104 = CARTESIAN_POINT('',(-0.377057976796,0.284182274245));+#5105 = VECTOR('',#5106,1.);+#5106 = DIRECTION('',(0.839949759337,-0.542664170358));+#5107 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5108 = ORIENTED_EDGE('',*,*,#5064,.F.);+#5109 = ORIENTED_EDGE('',*,*,#4634,.F.);+#5110 = ORIENTED_EDGE('',*,*,#4576,.T.);+#5111 = ADVANCED_FACE('',(#5112),#4564,.T.);+#5112 = FACE_BOUND('',#5113,.T.);+#5113 = EDGE_LOOP('',(#5114,#5115,#5116,#5117,#5118,#5119,#5120,#5121));+#5114 = ORIENTED_EDGE('',*,*,#4548,.T.);+#5115 = ORIENTED_EDGE('',*,*,#5088,.T.);+#5116 = ORIENTED_EDGE('',*,*,#5039,.T.);+#5117 = ORIENTED_EDGE('',*,*,#4990,.T.);+#5118 = ORIENTED_EDGE('',*,*,#4941,.T.);+#5119 = ORIENTED_EDGE('',*,*,#4892,.T.);+#5120 = ORIENTED_EDGE('',*,*,#4844,.T.);+#5121 = ORIENTED_EDGE('',*,*,#5122,.T.);+#5122 = EDGE_CURVE('',#4845,#4514,#5123,.T.);+#5123 = SURFACE_CURVE('',#5124,(#5128,#5135),.PCURVE_S1.);+#5124 = LINE('',#5125,#5126);+#5125 = CARTESIAN_POINT('',(-2.15,-1.125,0.445));+#5126 = VECTOR('',#5127,1.);+#5127 = DIRECTION('',(0.,0.,1.));+#5128 = PCURVE('',#4564,#5129);+#5129 = DEFINITIONAL_REPRESENTATION('',(#5130),#5134);+#5130 = LINE('',#5131,#5132);+#5131 = CARTESIAN_POINT('',(-0.227057976796,0.484182274245));+#5132 = VECTOR('',#5133,1.);+#5133 = DIRECTION('',(-1.,0.));+#5134 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5135 = PCURVE('',#4536,#5136);+#5136 = DEFINITIONAL_REPRESENTATION('',(#5137),#5141);+#5137 = LINE('',#5138,#5139);+#5138 = CARTESIAN_POINT('',(0.,-0.15));+#5139 = VECTOR('',#5140,1.);+#5140 = DIRECTION('',(1.,0.));+#5141 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5142 = ADVANCED_FACE('',(#5143),#4536,.F.);+#5143 = FACE_BOUND('',#5144,.F.);+#5144 = EDGE_LOOP('',(#5145,#5146,#5147,#5148));+#5145 = ORIENTED_EDGE('',*,*,#4867,.F.);+#5146 = ORIENTED_EDGE('',*,*,#5122,.T.);+#5147 = ORIENTED_EDGE('',*,*,#4513,.T.);+#5148 = ORIENTED_EDGE('',*,*,#4797,.F.);+#5149 = MANIFOLD_SOLID_BREP('',#5150);+#5150 = CLOSED_SHELL('',(#5151,#5271,#5459,#5530,#5579,#5628,#5677,#5726+ ,#5753,#5784));+#5151 = ADVANCED_FACE('',(#5152),#5166,.F.);+#5152 = FACE_BOUND('',#5153,.F.);+#5153 = EDGE_LOOP('',(#5154,#5189,#5217,#5245));+#5154 = ORIENTED_EDGE('',*,*,#5155,.F.);+#5155 = EDGE_CURVE('',#5156,#5158,#5160,.T.);+#5156 = VERTEX_POINT('',#5157);+#5157 = CARTESIAN_POINT('',(-2.15,-1.775,0.595));+#5158 = VERTEX_POINT('',#5159);+#5159 = CARTESIAN_POINT('',(-2.15,-1.475,0.595));+#5160 = SURFACE_CURVE('',#5161,(#5165,#5177),.PCURVE_S1.);+#5161 = LINE('',#5162,#5163);+#5162 = CARTESIAN_POINT('',(-2.15,-1.775,0.595));+#5163 = VECTOR('',#5164,1.);+#5164 = DIRECTION('',(0.,1.,0.));+#5165 = PCURVE('',#5166,#5171);+#5166 = PLANE('',#5167);+#5167 = AXIS2_PLACEMENT_3D('',#5168,#5169,#5170);+#5168 = CARTESIAN_POINT('',(-2.15,-1.625,0.595));+#5169 = DIRECTION('',(-0.,-0.,-1.));+#5170 = DIRECTION('',(-1.,0.,0.));+#5171 = DEFINITIONAL_REPRESENTATION('',(#5172),#5176);+#5172 = LINE('',#5173,#5174);+#5173 = CARTESIAN_POINT('',(0.,-0.15));+#5174 = VECTOR('',#5175,1.);+#5175 = DIRECTION('',(0.,1.));+#5176 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5177 = PCURVE('',#5178,#5183);+#5178 = PLANE('',#5179);+#5179 = AXIS2_PLACEMENT_3D('',#5180,#5181,#5182);+#5180 = CARTESIAN_POINT('',(-2.15,-1.625,0.445));+#5181 = DIRECTION('',(-1.,0.,0.));+#5182 = DIRECTION('',(0.,0.,1.));+#5183 = DEFINITIONAL_REPRESENTATION('',(#5184),#5188);+#5184 = LINE('',#5185,#5186);+#5185 = CARTESIAN_POINT('',(0.15,-0.15));+#5186 = VECTOR('',#5187,1.);+#5187 = DIRECTION('',(0.,1.));+#5188 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5189 = ORIENTED_EDGE('',*,*,#5190,.T.);+#5190 = EDGE_CURVE('',#5156,#5191,#5193,.T.);+#5191 = VERTEX_POINT('',#5192);+#5192 = CARTESIAN_POINT('',(-2.35,-1.775,0.595));+#5193 = SURFACE_CURVE('',#5194,(#5198,#5205),.PCURVE_S1.);+#5194 = LINE('',#5195,#5196);+#5195 = CARTESIAN_POINT('',(-2.15,-1.775,0.595));+#5196 = VECTOR('',#5197,1.);+#5197 = DIRECTION('',(-1.,0.,0.));+#5198 = PCURVE('',#5166,#5199);+#5199 = DEFINITIONAL_REPRESENTATION('',(#5200),#5204);+#5200 = LINE('',#5201,#5202);+#5201 = CARTESIAN_POINT('',(0.,-0.15));+#5202 = VECTOR('',#5203,1.);+#5203 = DIRECTION('',(1.,0.));+#5204 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5205 = PCURVE('',#5206,#5211);+#5206 = PLANE('',#5207);+#5207 = AXIS2_PLACEMENT_3D('',#5208,#5209,#5210);+#5208 = CARTESIAN_POINT('',(-2.634182274245,-1.775,0.217942023204));+#5209 = DIRECTION('',(-0.,-1.,-0.));+#5210 = DIRECTION('',(0.,0.,-1.));+#5211 = DEFINITIONAL_REPRESENTATION('',(#5212),#5216);+#5212 = LINE('',#5213,#5214);+#5213 = CARTESIAN_POINT('',(-0.377057976796,0.484182274245));+#5214 = VECTOR('',#5215,1.);+#5215 = DIRECTION('',(0.,-1.));+#5216 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5217 = ORIENTED_EDGE('',*,*,#5218,.F.);+#5218 = EDGE_CURVE('',#5219,#5191,#5221,.T.);+#5219 = VERTEX_POINT('',#5220);+#5220 = CARTESIAN_POINT('',(-2.35,-1.475,0.595));+#5221 = SURFACE_CURVE('',#5222,(#5226,#5233),.PCURVE_S1.);+#5222 = LINE('',#5223,#5224);+#5223 = CARTESIAN_POINT('',(-2.35,-1.475,0.595));+#5224 = VECTOR('',#5225,1.);+#5225 = DIRECTION('',(0.,-1.,0.));+#5226 = PCURVE('',#5166,#5227);+#5227 = DEFINITIONAL_REPRESENTATION('',(#5228),#5232);+#5228 = LINE('',#5229,#5230);+#5229 = CARTESIAN_POINT('',(0.2,0.15));+#5230 = VECTOR('',#5231,1.);+#5231 = DIRECTION('',(0.,-1.));+#5232 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5233 = PCURVE('',#5234,#5239);+#5234 = PLANE('',#5235);+#5235 = AXIS2_PLACEMENT_3D('',#5236,#5237,#5238);+#5236 = CARTESIAN_POINT('',(-2.35,-1.625,0.595));+#5237 = DIRECTION('',(0.839949759337,0.,-0.542664170358));+#5238 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#5239 = DEFINITIONAL_REPRESENTATION('',(#5240),#5244);+#5240 = LINE('',#5241,#5242);+#5241 = CARTESIAN_POINT('',(0.,0.15));+#5242 = VECTOR('',#5243,1.);+#5243 = DIRECTION('',(-0.,-1.));+#5244 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5245 = ORIENTED_EDGE('',*,*,#5246,.F.);+#5246 = EDGE_CURVE('',#5158,#5219,#5247,.T.);+#5247 = SURFACE_CURVE('',#5248,(#5252,#5259),.PCURVE_S1.);+#5248 = LINE('',#5249,#5250);+#5249 = CARTESIAN_POINT('',(-2.15,-1.475,0.595));+#5250 = VECTOR('',#5251,1.);+#5251 = DIRECTION('',(-1.,0.,0.));+#5252 = PCURVE('',#5166,#5253);+#5253 = DEFINITIONAL_REPRESENTATION('',(#5254),#5258);+#5254 = LINE('',#5255,#5256);+#5255 = CARTESIAN_POINT('',(0.,0.15));+#5256 = VECTOR('',#5257,1.);+#5257 = DIRECTION('',(1.,0.));+#5258 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5259 = PCURVE('',#5260,#5265);+#5260 = PLANE('',#5261);+#5261 = AXIS2_PLACEMENT_3D('',#5262,#5263,#5264);+#5262 = CARTESIAN_POINT('',(-2.634182274245,-1.475,0.217942023204));+#5263 = DIRECTION('',(-0.,-1.,-0.));+#5264 = DIRECTION('',(0.,0.,-1.));+#5265 = DEFINITIONAL_REPRESENTATION('',(#5266),#5270);+#5266 = LINE('',#5267,#5268);+#5267 = CARTESIAN_POINT('',(-0.377057976796,0.484182274245));+#5268 = VECTOR('',#5269,1.);+#5269 = DIRECTION('',(0.,-1.));+#5270 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5271 = ADVANCED_FACE('',(#5272),#5260,.F.);+#5272 = FACE_BOUND('',#5273,.F.);+#5273 = EDGE_LOOP('',(#5274,#5275,#5298,#5326,#5354,#5382,#5410,#5438));+#5274 = ORIENTED_EDGE('',*,*,#5246,.T.);+#5275 = ORIENTED_EDGE('',*,*,#5276,.T.);+#5276 = EDGE_CURVE('',#5219,#5277,#5279,.T.);+#5277 = VERTEX_POINT('',#5278);+#5278 = CARTESIAN_POINT('',(-2.6375,-1.475,0.15));+#5279 = SURFACE_CURVE('',#5280,(#5284,#5291),.PCURVE_S1.);+#5280 = LINE('',#5281,#5282);+#5281 = CARTESIAN_POINT('',(-2.35,-1.475,0.595));+#5282 = VECTOR('',#5283,1.);+#5283 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#5284 = PCURVE('',#5260,#5285);+#5285 = DEFINITIONAL_REPRESENTATION('',(#5286),#5290);+#5286 = LINE('',#5287,#5288);+#5287 = CARTESIAN_POINT('',(-0.377057976796,0.284182274245));+#5288 = VECTOR('',#5289,1.);+#5289 = DIRECTION('',(0.839949759337,-0.542664170358));+#5290 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5291 = PCURVE('',#5234,#5292);+#5292 = DEFINITIONAL_REPRESENTATION('',(#5293),#5297);+#5293 = LINE('',#5294,#5295);+#5294 = CARTESIAN_POINT('',(0.,0.15));+#5295 = VECTOR('',#5296,1.);+#5296 = DIRECTION('',(1.,0.));+#5297 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5298 = ORIENTED_EDGE('',*,*,#5299,.T.);+#5299 = EDGE_CURVE('',#5277,#5300,#5302,.T.);+#5300 = VERTEX_POINT('',#5301);+#5301 = CARTESIAN_POINT('',(-3.205,-1.475,0.15));+#5302 = SURFACE_CURVE('',#5303,(#5307,#5314),.PCURVE_S1.);+#5303 = LINE('',#5304,#5305);+#5304 = CARTESIAN_POINT('',(-2.6375,-1.475,0.15));+#5305 = VECTOR('',#5306,1.);+#5306 = DIRECTION('',(-1.,0.,0.));+#5307 = PCURVE('',#5260,#5308);+#5308 = DEFINITIONAL_REPRESENTATION('',(#5309),#5313);+#5309 = LINE('',#5310,#5311);+#5310 = CARTESIAN_POINT('',(6.7942023204E-02,-3.317725755E-03));+#5311 = VECTOR('',#5312,1.);+#5312 = DIRECTION('',(0.,-1.));+#5313 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5314 = PCURVE('',#5315,#5320);+#5315 = PLANE('',#5316);+#5316 = AXIS2_PLACEMENT_3D('',#5317,#5318,#5319);+#5317 = CARTESIAN_POINT('',(-2.6375,-1.625,0.15));+#5318 = DIRECTION('',(-0.,-0.,-1.));+#5319 = DIRECTION('',(-1.,0.,0.));+#5320 = DEFINITIONAL_REPRESENTATION('',(#5321),#5325);+#5321 = LINE('',#5322,#5323);+#5322 = CARTESIAN_POINT('',(0.,0.15));+#5323 = VECTOR('',#5324,1.);+#5324 = DIRECTION('',(1.,0.));+#5325 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5326 = ORIENTED_EDGE('',*,*,#5327,.T.);+#5327 = EDGE_CURVE('',#5300,#5328,#5330,.T.);+#5328 = VERTEX_POINT('',#5329);+#5329 = CARTESIAN_POINT('',(-3.205,-1.475,0.));+#5330 = SURFACE_CURVE('',#5331,(#5335,#5342),.PCURVE_S1.);+#5331 = LINE('',#5332,#5333);+#5332 = CARTESIAN_POINT('',(-3.205,-1.475,0.15));+#5333 = VECTOR('',#5334,1.);+#5334 = DIRECTION('',(0.,0.,-1.));+#5335 = PCURVE('',#5260,#5336);+#5336 = DEFINITIONAL_REPRESENTATION('',(#5337),#5341);+#5337 = LINE('',#5338,#5339);+#5338 = CARTESIAN_POINT('',(6.7942023204E-02,-0.570817725755));+#5339 = VECTOR('',#5340,1.);+#5340 = DIRECTION('',(1.,0.));+#5341 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5342 = PCURVE('',#5343,#5348);+#5343 = PLANE('',#5344);+#5344 = AXIS2_PLACEMENT_3D('',#5345,#5346,#5347);+#5345 = CARTESIAN_POINT('',(-3.205,-1.625,0.15));+#5346 = DIRECTION('',(1.,0.,0.));+#5347 = DIRECTION('',(0.,0.,-1.));+#5348 = DEFINITIONAL_REPRESENTATION('',(#5349),#5353);+#5349 = LINE('',#5350,#5351);+#5350 = CARTESIAN_POINT('',(0.,0.15));+#5351 = VECTOR('',#5352,1.);+#5352 = DIRECTION('',(1.,0.));+#5353 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5354 = ORIENTED_EDGE('',*,*,#5355,.T.);+#5355 = EDGE_CURVE('',#5328,#5356,#5358,.T.);+#5356 = VERTEX_POINT('',#5357);+#5357 = CARTESIAN_POINT('',(-2.4875,-1.475,0.));+#5358 = SURFACE_CURVE('',#5359,(#5363,#5370),.PCURVE_S1.);+#5359 = LINE('',#5360,#5361);+#5360 = CARTESIAN_POINT('',(-3.205,-1.475,0.));+#5361 = VECTOR('',#5362,1.);+#5362 = DIRECTION('',(1.,0.,0.));+#5363 = PCURVE('',#5260,#5364);+#5364 = DEFINITIONAL_REPRESENTATION('',(#5365),#5369);+#5365 = LINE('',#5366,#5367);+#5366 = CARTESIAN_POINT('',(0.217942023204,-0.570817725755));+#5367 = VECTOR('',#5368,1.);+#5368 = DIRECTION('',(0.,1.));+#5369 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5370 = PCURVE('',#5371,#5376);+#5371 = PLANE('',#5372);+#5372 = AXIS2_PLACEMENT_3D('',#5373,#5374,#5375);+#5373 = CARTESIAN_POINT('',(-3.205,-1.625,0.));+#5374 = DIRECTION('',(0.,0.,1.));+#5375 = DIRECTION('',(1.,0.,0.));+#5376 = DEFINITIONAL_REPRESENTATION('',(#5377),#5381);+#5377 = LINE('',#5378,#5379);+#5378 = CARTESIAN_POINT('',(0.,0.15));+#5379 = VECTOR('',#5380,1.);+#5380 = DIRECTION('',(1.,0.));+#5381 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5382 = ORIENTED_EDGE('',*,*,#5383,.T.);+#5383 = EDGE_CURVE('',#5356,#5384,#5386,.T.);+#5384 = VERTEX_POINT('',#5385);+#5385 = CARTESIAN_POINT('',(-2.2,-1.475,0.445));+#5386 = SURFACE_CURVE('',#5387,(#5391,#5398),.PCURVE_S1.);+#5387 = LINE('',#5388,#5389);+#5388 = CARTESIAN_POINT('',(-2.4875,-1.475,0.));+#5389 = VECTOR('',#5390,1.);+#5390 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#5391 = PCURVE('',#5260,#5392);+#5392 = DEFINITIONAL_REPRESENTATION('',(#5393),#5397);+#5393 = LINE('',#5394,#5395);+#5394 = CARTESIAN_POINT('',(0.217942023204,0.146682274245));+#5395 = VECTOR('',#5396,1.);+#5396 = DIRECTION('',(-0.839949759337,0.542664170358));+#5397 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5398 = PCURVE('',#5399,#5404);+#5399 = PLANE('',#5400);+#5400 = AXIS2_PLACEMENT_3D('',#5401,#5402,#5403);+#5401 = CARTESIAN_POINT('',(-2.4875,-1.625,0.));+#5402 = DIRECTION('',(-0.839949759337,0.,0.542664170358));+#5403 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#5404 = DEFINITIONAL_REPRESENTATION('',(#5405),#5409);+#5405 = LINE('',#5406,#5407);+#5406 = CARTESIAN_POINT('',(0.,0.15));+#5407 = VECTOR('',#5408,1.);+#5408 = DIRECTION('',(1.,0.));+#5409 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5410 = ORIENTED_EDGE('',*,*,#5411,.T.);+#5411 = EDGE_CURVE('',#5384,#5412,#5414,.T.);+#5412 = VERTEX_POINT('',#5413);+#5413 = CARTESIAN_POINT('',(-2.15,-1.475,0.445));+#5414 = SURFACE_CURVE('',#5415,(#5419,#5426),.PCURVE_S1.);+#5415 = LINE('',#5416,#5417);+#5416 = CARTESIAN_POINT('',(-2.2,-1.475,0.445));+#5417 = VECTOR('',#5418,1.);+#5418 = DIRECTION('',(1.,0.,0.));+#5419 = PCURVE('',#5260,#5420);+#5420 = DEFINITIONAL_REPRESENTATION('',(#5421),#5425);+#5421 = LINE('',#5422,#5423);+#5422 = CARTESIAN_POINT('',(-0.227057976796,0.434182274245));+#5423 = VECTOR('',#5424,1.);+#5424 = DIRECTION('',(0.,1.));+#5425 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5426 = PCURVE('',#5427,#5432);+#5427 = PLANE('',#5428);+#5428 = AXIS2_PLACEMENT_3D('',#5429,#5430,#5431);+#5429 = CARTESIAN_POINT('',(-2.2,-1.625,0.445));+#5430 = DIRECTION('',(0.,0.,1.));+#5431 = DIRECTION('',(1.,0.,0.));+#5432 = DEFINITIONAL_REPRESENTATION('',(#5433),#5437);+#5433 = LINE('',#5434,#5435);+#5434 = CARTESIAN_POINT('',(0.,0.15));+#5435 = VECTOR('',#5436,1.);+#5436 = DIRECTION('',(1.,0.));+#5437 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5438 = ORIENTED_EDGE('',*,*,#5439,.T.);+#5439 = EDGE_CURVE('',#5412,#5158,#5440,.T.);+#5440 = SURFACE_CURVE('',#5441,(#5445,#5452),.PCURVE_S1.);+#5441 = LINE('',#5442,#5443);+#5442 = CARTESIAN_POINT('',(-2.15,-1.475,0.445));+#5443 = VECTOR('',#5444,1.);+#5444 = DIRECTION('',(0.,0.,1.));+#5445 = PCURVE('',#5260,#5446);+#5446 = DEFINITIONAL_REPRESENTATION('',(#5447),#5451);+#5447 = LINE('',#5448,#5449);+#5448 = CARTESIAN_POINT('',(-0.227057976796,0.484182274245));+#5449 = VECTOR('',#5450,1.);+#5450 = DIRECTION('',(-1.,0.));+#5451 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5452 = PCURVE('',#5178,#5453);+#5453 = DEFINITIONAL_REPRESENTATION('',(#5454),#5458);+#5454 = LINE('',#5455,#5456);+#5455 = CARTESIAN_POINT('',(0.,0.15));+#5456 = VECTOR('',#5457,1.);+#5457 = DIRECTION('',(1.,0.));+#5458 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5459 = ADVANCED_FACE('',(#5460),#5427,.F.);+#5460 = FACE_BOUND('',#5461,.F.);+#5461 = EDGE_LOOP('',(#5462,#5485,#5508,#5529));+#5462 = ORIENTED_EDGE('',*,*,#5463,.F.);+#5463 = EDGE_CURVE('',#5464,#5384,#5466,.T.);+#5464 = VERTEX_POINT('',#5465);+#5465 = CARTESIAN_POINT('',(-2.2,-1.775,0.445));+#5466 = SURFACE_CURVE('',#5467,(#5471,#5478),.PCURVE_S1.);+#5467 = LINE('',#5468,#5469);+#5468 = CARTESIAN_POINT('',(-2.2,-1.775,0.445));+#5469 = VECTOR('',#5470,1.);+#5470 = DIRECTION('',(0.,1.,0.));+#5471 = PCURVE('',#5427,#5472);+#5472 = DEFINITIONAL_REPRESENTATION('',(#5473),#5477);+#5473 = LINE('',#5474,#5475);+#5474 = CARTESIAN_POINT('',(0.,-0.15));+#5475 = VECTOR('',#5476,1.);+#5476 = DIRECTION('',(0.,1.));+#5477 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5478 = PCURVE('',#5399,#5479);+#5479 = DEFINITIONAL_REPRESENTATION('',(#5480),#5484);+#5480 = LINE('',#5481,#5482);+#5481 = CARTESIAN_POINT('',(0.529793591883,-0.15));+#5482 = VECTOR('',#5483,1.);+#5483 = DIRECTION('',(0.,1.));+#5484 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5485 = ORIENTED_EDGE('',*,*,#5486,.T.);+#5486 = EDGE_CURVE('',#5464,#5487,#5489,.T.);+#5487 = VERTEX_POINT('',#5488);+#5488 = CARTESIAN_POINT('',(-2.15,-1.775,0.445));+#5489 = SURFACE_CURVE('',#5490,(#5494,#5501),.PCURVE_S1.);+#5490 = LINE('',#5491,#5492);+#5491 = CARTESIAN_POINT('',(-2.2,-1.775,0.445));+#5492 = VECTOR('',#5493,1.);+#5493 = DIRECTION('',(1.,0.,0.));+#5494 = PCURVE('',#5427,#5495);+#5495 = DEFINITIONAL_REPRESENTATION('',(#5496),#5500);+#5496 = LINE('',#5497,#5498);+#5497 = CARTESIAN_POINT('',(0.,-0.15));+#5498 = VECTOR('',#5499,1.);+#5499 = DIRECTION('',(1.,0.));+#5500 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5501 = PCURVE('',#5206,#5502);+#5502 = DEFINITIONAL_REPRESENTATION('',(#5503),#5507);+#5503 = LINE('',#5504,#5505);+#5504 = CARTESIAN_POINT('',(-0.227057976796,0.434182274245));+#5505 = VECTOR('',#5506,1.);+#5506 = DIRECTION('',(0.,1.));+#5507 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5508 = ORIENTED_EDGE('',*,*,#5509,.T.);+#5509 = EDGE_CURVE('',#5487,#5412,#5510,.T.);+#5510 = SURFACE_CURVE('',#5511,(#5515,#5522),.PCURVE_S1.);+#5511 = LINE('',#5512,#5513);+#5512 = CARTESIAN_POINT('',(-2.15,-1.775,0.445));+#5513 = VECTOR('',#5514,1.);+#5514 = DIRECTION('',(0.,1.,0.));+#5515 = PCURVE('',#5427,#5516);+#5516 = DEFINITIONAL_REPRESENTATION('',(#5517),#5521);+#5517 = LINE('',#5518,#5519);+#5518 = CARTESIAN_POINT('',(5.E-02,-0.15));+#5519 = VECTOR('',#5520,1.);+#5520 = DIRECTION('',(0.,1.));+#5521 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5522 = PCURVE('',#5178,#5523);+#5523 = DEFINITIONAL_REPRESENTATION('',(#5524),#5528);+#5524 = LINE('',#5525,#5526);+#5525 = CARTESIAN_POINT('',(0.,-0.15));+#5526 = VECTOR('',#5527,1.);+#5527 = DIRECTION('',(0.,1.));+#5528 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5529 = ORIENTED_EDGE('',*,*,#5411,.F.);+#5530 = ADVANCED_FACE('',(#5531),#5399,.F.);+#5531 = FACE_BOUND('',#5532,.F.);+#5532 = EDGE_LOOP('',(#5533,#5556,#5557,#5558));+#5533 = ORIENTED_EDGE('',*,*,#5534,.T.);+#5534 = EDGE_CURVE('',#5535,#5464,#5537,.T.);+#5535 = VERTEX_POINT('',#5536);+#5536 = CARTESIAN_POINT('',(-2.4875,-1.775,0.));+#5537 = SURFACE_CURVE('',#5538,(#5542,#5549),.PCURVE_S1.);+#5538 = LINE('',#5539,#5540);+#5539 = CARTESIAN_POINT('',(-2.4875,-1.775,0.));+#5540 = VECTOR('',#5541,1.);+#5541 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#5542 = PCURVE('',#5399,#5543);+#5543 = DEFINITIONAL_REPRESENTATION('',(#5544),#5548);+#5544 = LINE('',#5545,#5546);+#5545 = CARTESIAN_POINT('',(0.,-0.15));+#5546 = VECTOR('',#5547,1.);+#5547 = DIRECTION('',(1.,0.));+#5548 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5549 = PCURVE('',#5206,#5550);+#5550 = DEFINITIONAL_REPRESENTATION('',(#5551),#5555);+#5551 = LINE('',#5552,#5553);+#5552 = CARTESIAN_POINT('',(0.217942023204,0.146682274245));+#5553 = VECTOR('',#5554,1.);+#5554 = DIRECTION('',(-0.839949759337,0.542664170358));+#5555 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5556 = ORIENTED_EDGE('',*,*,#5463,.T.);+#5557 = ORIENTED_EDGE('',*,*,#5383,.F.);+#5558 = ORIENTED_EDGE('',*,*,#5559,.T.);+#5559 = EDGE_CURVE('',#5356,#5535,#5560,.T.);+#5560 = SURFACE_CURVE('',#5561,(#5565,#5572),.PCURVE_S1.);+#5561 = LINE('',#5562,#5563);+#5562 = CARTESIAN_POINT('',(-2.4875,-1.475,0.));+#5563 = VECTOR('',#5564,1.);+#5564 = DIRECTION('',(0.,-1.,0.));+#5565 = PCURVE('',#5399,#5566);+#5566 = DEFINITIONAL_REPRESENTATION('',(#5567),#5571);+#5567 = LINE('',#5568,#5569);+#5568 = CARTESIAN_POINT('',(0.,0.15));+#5569 = VECTOR('',#5570,1.);+#5570 = DIRECTION('',(0.,-1.));+#5571 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5572 = PCURVE('',#5371,#5573);+#5573 = DEFINITIONAL_REPRESENTATION('',(#5574),#5578);+#5574 = LINE('',#5575,#5576);+#5575 = CARTESIAN_POINT('',(0.7175,0.15));+#5576 = VECTOR('',#5577,1.);+#5577 = DIRECTION('',(0.,-1.));+#5578 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5579 = ADVANCED_FACE('',(#5580),#5371,.F.);+#5580 = FACE_BOUND('',#5581,.F.);+#5581 = EDGE_LOOP('',(#5582,#5605,#5606,#5607));+#5582 = ORIENTED_EDGE('',*,*,#5583,.T.);+#5583 = EDGE_CURVE('',#5584,#5535,#5586,.T.);+#5584 = VERTEX_POINT('',#5585);+#5585 = CARTESIAN_POINT('',(-3.205,-1.775,0.));+#5586 = SURFACE_CURVE('',#5587,(#5591,#5598),.PCURVE_S1.);+#5587 = LINE('',#5588,#5589);+#5588 = CARTESIAN_POINT('',(-3.205,-1.775,0.));+#5589 = VECTOR('',#5590,1.);+#5590 = DIRECTION('',(1.,0.,0.));+#5591 = PCURVE('',#5371,#5592);+#5592 = DEFINITIONAL_REPRESENTATION('',(#5593),#5597);+#5593 = LINE('',#5594,#5595);+#5594 = CARTESIAN_POINT('',(0.,-0.15));+#5595 = VECTOR('',#5596,1.);+#5596 = DIRECTION('',(1.,0.));+#5597 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5598 = PCURVE('',#5206,#5599);+#5599 = DEFINITIONAL_REPRESENTATION('',(#5600),#5604);+#5600 = LINE('',#5601,#5602);+#5601 = CARTESIAN_POINT('',(0.217942023204,-0.570817725755));+#5602 = VECTOR('',#5603,1.);+#5603 = DIRECTION('',(0.,1.));+#5604 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5605 = ORIENTED_EDGE('',*,*,#5559,.F.);+#5606 = ORIENTED_EDGE('',*,*,#5355,.F.);+#5607 = ORIENTED_EDGE('',*,*,#5608,.T.);+#5608 = EDGE_CURVE('',#5328,#5584,#5609,.T.);+#5609 = SURFACE_CURVE('',#5610,(#5614,#5621),.PCURVE_S1.);+#5610 = LINE('',#5611,#5612);+#5611 = CARTESIAN_POINT('',(-3.205,-1.475,0.));+#5612 = VECTOR('',#5613,1.);+#5613 = DIRECTION('',(0.,-1.,0.));+#5614 = PCURVE('',#5371,#5615);+#5615 = DEFINITIONAL_REPRESENTATION('',(#5616),#5620);+#5616 = LINE('',#5617,#5618);+#5617 = CARTESIAN_POINT('',(0.,0.15));+#5618 = VECTOR('',#5619,1.);+#5619 = DIRECTION('',(0.,-1.));+#5620 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5621 = PCURVE('',#5343,#5622);+#5622 = DEFINITIONAL_REPRESENTATION('',(#5623),#5627);+#5623 = LINE('',#5624,#5625);+#5624 = CARTESIAN_POINT('',(0.15,0.15));+#5625 = VECTOR('',#5626,1.);+#5626 = DIRECTION('',(0.,-1.));+#5627 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5628 = ADVANCED_FACE('',(#5629),#5343,.F.);+#5629 = FACE_BOUND('',#5630,.F.);+#5630 = EDGE_LOOP('',(#5631,#5654,#5655,#5656));+#5631 = ORIENTED_EDGE('',*,*,#5632,.T.);+#5632 = EDGE_CURVE('',#5633,#5584,#5635,.T.);+#5633 = VERTEX_POINT('',#5634);+#5634 = CARTESIAN_POINT('',(-3.205,-1.775,0.15));+#5635 = SURFACE_CURVE('',#5636,(#5640,#5647),.PCURVE_S1.);+#5636 = LINE('',#5637,#5638);+#5637 = CARTESIAN_POINT('',(-3.205,-1.775,0.15));+#5638 = VECTOR('',#5639,1.);+#5639 = DIRECTION('',(0.,0.,-1.));+#5640 = PCURVE('',#5343,#5641);+#5641 = DEFINITIONAL_REPRESENTATION('',(#5642),#5646);+#5642 = LINE('',#5643,#5644);+#5643 = CARTESIAN_POINT('',(0.,-0.15));+#5644 = VECTOR('',#5645,1.);+#5645 = DIRECTION('',(1.,0.));+#5646 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5647 = PCURVE('',#5206,#5648);+#5648 = DEFINITIONAL_REPRESENTATION('',(#5649),#5653);+#5649 = LINE('',#5650,#5651);+#5650 = CARTESIAN_POINT('',(6.7942023204E-02,-0.570817725755));+#5651 = VECTOR('',#5652,1.);+#5652 = DIRECTION('',(1.,0.));+#5653 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5654 = ORIENTED_EDGE('',*,*,#5608,.F.);+#5655 = ORIENTED_EDGE('',*,*,#5327,.F.);+#5656 = ORIENTED_EDGE('',*,*,#5657,.T.);+#5657 = EDGE_CURVE('',#5300,#5633,#5658,.T.);+#5658 = SURFACE_CURVE('',#5659,(#5663,#5670),.PCURVE_S1.);+#5659 = LINE('',#5660,#5661);+#5660 = CARTESIAN_POINT('',(-3.205,-1.475,0.15));+#5661 = VECTOR('',#5662,1.);+#5662 = DIRECTION('',(0.,-1.,0.));+#5663 = PCURVE('',#5343,#5664);+#5664 = DEFINITIONAL_REPRESENTATION('',(#5665),#5669);+#5665 = LINE('',#5666,#5667);+#5666 = CARTESIAN_POINT('',(0.,0.15));+#5667 = VECTOR('',#5668,1.);+#5668 = DIRECTION('',(0.,-1.));+#5669 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5670 = PCURVE('',#5315,#5671);+#5671 = DEFINITIONAL_REPRESENTATION('',(#5672),#5676);+#5672 = LINE('',#5673,#5674);+#5673 = CARTESIAN_POINT('',(0.5675,0.15));+#5674 = VECTOR('',#5675,1.);+#5675 = DIRECTION('',(0.,-1.));+#5676 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5677 = ADVANCED_FACE('',(#5678),#5315,.F.);+#5678 = FACE_BOUND('',#5679,.F.);+#5679 = EDGE_LOOP('',(#5680,#5703,#5704,#5705));+#5680 = ORIENTED_EDGE('',*,*,#5681,.T.);+#5681 = EDGE_CURVE('',#5682,#5633,#5684,.T.);+#5682 = VERTEX_POINT('',#5683);+#5683 = CARTESIAN_POINT('',(-2.6375,-1.775,0.15));+#5684 = SURFACE_CURVE('',#5685,(#5689,#5696),.PCURVE_S1.);+#5685 = LINE('',#5686,#5687);+#5686 = CARTESIAN_POINT('',(-2.6375,-1.775,0.15));+#5687 = VECTOR('',#5688,1.);+#5688 = DIRECTION('',(-1.,0.,0.));+#5689 = PCURVE('',#5315,#5690);+#5690 = DEFINITIONAL_REPRESENTATION('',(#5691),#5695);+#5691 = LINE('',#5692,#5693);+#5692 = CARTESIAN_POINT('',(0.,-0.15));+#5693 = VECTOR('',#5694,1.);+#5694 = DIRECTION('',(1.,0.));+#5695 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5696 = PCURVE('',#5206,#5697);+#5697 = DEFINITIONAL_REPRESENTATION('',(#5698),#5702);+#5698 = LINE('',#5699,#5700);+#5699 = CARTESIAN_POINT('',(6.7942023204E-02,-3.317725755E-03));+#5700 = VECTOR('',#5701,1.);+#5701 = DIRECTION('',(0.,-1.));+#5702 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5703 = ORIENTED_EDGE('',*,*,#5657,.F.);+#5704 = ORIENTED_EDGE('',*,*,#5299,.F.);+#5705 = ORIENTED_EDGE('',*,*,#5706,.T.);+#5706 = EDGE_CURVE('',#5277,#5682,#5707,.T.);+#5707 = SURFACE_CURVE('',#5708,(#5712,#5719),.PCURVE_S1.);+#5708 = LINE('',#5709,#5710);+#5709 = CARTESIAN_POINT('',(-2.6375,-1.475,0.15));+#5710 = VECTOR('',#5711,1.);+#5711 = DIRECTION('',(0.,-1.,0.));+#5712 = PCURVE('',#5315,#5713);+#5713 = DEFINITIONAL_REPRESENTATION('',(#5714),#5718);+#5714 = LINE('',#5715,#5716);+#5715 = CARTESIAN_POINT('',(0.,0.15));+#5716 = VECTOR('',#5717,1.);+#5717 = DIRECTION('',(0.,-1.));+#5718 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5719 = PCURVE('',#5234,#5720);+#5720 = DEFINITIONAL_REPRESENTATION('',(#5721),#5725);+#5721 = LINE('',#5722,#5723);+#5722 = CARTESIAN_POINT('',(0.529793591883,0.15));+#5723 = VECTOR('',#5724,1.);+#5724 = DIRECTION('',(-0.,-1.));+#5725 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5726 = ADVANCED_FACE('',(#5727),#5234,.F.);+#5727 = FACE_BOUND('',#5728,.F.);+#5728 = EDGE_LOOP('',(#5729,#5750,#5751,#5752));+#5729 = ORIENTED_EDGE('',*,*,#5730,.T.);+#5730 = EDGE_CURVE('',#5191,#5682,#5731,.T.);+#5731 = SURFACE_CURVE('',#5732,(#5736,#5743),.PCURVE_S1.);+#5732 = LINE('',#5733,#5734);+#5733 = CARTESIAN_POINT('',(-2.35,-1.775,0.595));+#5734 = VECTOR('',#5735,1.);+#5735 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#5736 = PCURVE('',#5234,#5737);+#5737 = DEFINITIONAL_REPRESENTATION('',(#5738),#5742);+#5738 = LINE('',#5739,#5740);+#5739 = CARTESIAN_POINT('',(-0.,-0.15));+#5740 = VECTOR('',#5741,1.);+#5741 = DIRECTION('',(1.,0.));+#5742 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5743 = PCURVE('',#5206,#5744);+#5744 = DEFINITIONAL_REPRESENTATION('',(#5745),#5749);+#5745 = LINE('',#5746,#5747);+#5746 = CARTESIAN_POINT('',(-0.377057976796,0.284182274245));+#5747 = VECTOR('',#5748,1.);+#5748 = DIRECTION('',(0.839949759337,-0.542664170358));+#5749 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5750 = ORIENTED_EDGE('',*,*,#5706,.F.);+#5751 = ORIENTED_EDGE('',*,*,#5276,.F.);+#5752 = ORIENTED_EDGE('',*,*,#5218,.T.);+#5753 = ADVANCED_FACE('',(#5754),#5206,.T.);+#5754 = FACE_BOUND('',#5755,.T.);+#5755 = EDGE_LOOP('',(#5756,#5757,#5758,#5759,#5760,#5761,#5762,#5763));+#5756 = ORIENTED_EDGE('',*,*,#5190,.T.);+#5757 = ORIENTED_EDGE('',*,*,#5730,.T.);+#5758 = ORIENTED_EDGE('',*,*,#5681,.T.);+#5759 = ORIENTED_EDGE('',*,*,#5632,.T.);+#5760 = ORIENTED_EDGE('',*,*,#5583,.T.);+#5761 = ORIENTED_EDGE('',*,*,#5534,.T.);+#5762 = ORIENTED_EDGE('',*,*,#5486,.T.);+#5763 = ORIENTED_EDGE('',*,*,#5764,.T.);+#5764 = EDGE_CURVE('',#5487,#5156,#5765,.T.);+#5765 = SURFACE_CURVE('',#5766,(#5770,#5777),.PCURVE_S1.);+#5766 = LINE('',#5767,#5768);+#5767 = CARTESIAN_POINT('',(-2.15,-1.775,0.445));+#5768 = VECTOR('',#5769,1.);+#5769 = DIRECTION('',(0.,0.,1.));+#5770 = PCURVE('',#5206,#5771);+#5771 = DEFINITIONAL_REPRESENTATION('',(#5772),#5776);+#5772 = LINE('',#5773,#5774);+#5773 = CARTESIAN_POINT('',(-0.227057976796,0.484182274245));+#5774 = VECTOR('',#5775,1.);+#5775 = DIRECTION('',(-1.,0.));+#5776 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5777 = PCURVE('',#5178,#5778);+#5778 = DEFINITIONAL_REPRESENTATION('',(#5779),#5783);+#5779 = LINE('',#5780,#5781);+#5780 = CARTESIAN_POINT('',(0.,-0.15));+#5781 = VECTOR('',#5782,1.);+#5782 = DIRECTION('',(1.,0.));+#5783 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5784 = ADVANCED_FACE('',(#5785),#5178,.F.);+#5785 = FACE_BOUND('',#5786,.F.);+#5786 = EDGE_LOOP('',(#5787,#5788,#5789,#5790));+#5787 = ORIENTED_EDGE('',*,*,#5509,.F.);+#5788 = ORIENTED_EDGE('',*,*,#5764,.T.);+#5789 = ORIENTED_EDGE('',*,*,#5155,.T.);+#5790 = ORIENTED_EDGE('',*,*,#5439,.F.);+#5791 = MANIFOLD_SOLID_BREP('',#5792);+#5792 = CLOSED_SHELL('',(#5793,#5913,#6101,#6172,#6221,#6270,#6319,#6368+ ,#6395,#6426));+#5793 = ADVANCED_FACE('',(#5794),#5808,.F.);+#5794 = FACE_BOUND('',#5795,.F.);+#5795 = EDGE_LOOP('',(#5796,#5831,#5859,#5887));+#5796 = ORIENTED_EDGE('',*,*,#5797,.F.);+#5797 = EDGE_CURVE('',#5798,#5800,#5802,.T.);+#5798 = VERTEX_POINT('',#5799);+#5799 = CARTESIAN_POINT('',(-2.15,-2.425,0.595));+#5800 = VERTEX_POINT('',#5801);+#5801 = CARTESIAN_POINT('',(-2.15,-2.125,0.595));+#5802 = SURFACE_CURVE('',#5803,(#5807,#5819),.PCURVE_S1.);+#5803 = LINE('',#5804,#5805);+#5804 = CARTESIAN_POINT('',(-2.15,-2.425,0.595));+#5805 = VECTOR('',#5806,1.);+#5806 = DIRECTION('',(0.,1.,0.));+#5807 = PCURVE('',#5808,#5813);+#5808 = PLANE('',#5809);+#5809 = AXIS2_PLACEMENT_3D('',#5810,#5811,#5812);+#5810 = CARTESIAN_POINT('',(-2.15,-2.275,0.595));+#5811 = DIRECTION('',(-0.,-0.,-1.));+#5812 = DIRECTION('',(-1.,0.,0.));+#5813 = DEFINITIONAL_REPRESENTATION('',(#5814),#5818);+#5814 = LINE('',#5815,#5816);+#5815 = CARTESIAN_POINT('',(0.,-0.15));+#5816 = VECTOR('',#5817,1.);+#5817 = DIRECTION('',(0.,1.));+#5818 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5819 = PCURVE('',#5820,#5825);+#5820 = PLANE('',#5821);+#5821 = AXIS2_PLACEMENT_3D('',#5822,#5823,#5824);+#5822 = CARTESIAN_POINT('',(-2.15,-2.275,0.445));+#5823 = DIRECTION('',(-1.,0.,0.));+#5824 = DIRECTION('',(0.,0.,1.));+#5825 = DEFINITIONAL_REPRESENTATION('',(#5826),#5830);+#5826 = LINE('',#5827,#5828);+#5827 = CARTESIAN_POINT('',(0.15,-0.15));+#5828 = VECTOR('',#5829,1.);+#5829 = DIRECTION('',(0.,1.));+#5830 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5831 = ORIENTED_EDGE('',*,*,#5832,.T.);+#5832 = EDGE_CURVE('',#5798,#5833,#5835,.T.);+#5833 = VERTEX_POINT('',#5834);+#5834 = CARTESIAN_POINT('',(-2.35,-2.425,0.595));+#5835 = SURFACE_CURVE('',#5836,(#5840,#5847),.PCURVE_S1.);+#5836 = LINE('',#5837,#5838);+#5837 = CARTESIAN_POINT('',(-2.15,-2.425,0.595));+#5838 = VECTOR('',#5839,1.);+#5839 = DIRECTION('',(-1.,0.,0.));+#5840 = PCURVE('',#5808,#5841);+#5841 = DEFINITIONAL_REPRESENTATION('',(#5842),#5846);+#5842 = LINE('',#5843,#5844);+#5843 = CARTESIAN_POINT('',(0.,-0.15));+#5844 = VECTOR('',#5845,1.);+#5845 = DIRECTION('',(1.,0.));+#5846 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5847 = PCURVE('',#5848,#5853);+#5848 = PLANE('',#5849);+#5849 = AXIS2_PLACEMENT_3D('',#5850,#5851,#5852);+#5850 = CARTESIAN_POINT('',(-2.634182274245,-2.425,0.217942023204));+#5851 = DIRECTION('',(-0.,-1.,-0.));+#5852 = DIRECTION('',(0.,0.,-1.));+#5853 = DEFINITIONAL_REPRESENTATION('',(#5854),#5858);+#5854 = LINE('',#5855,#5856);+#5855 = CARTESIAN_POINT('',(-0.377057976796,0.484182274245));+#5856 = VECTOR('',#5857,1.);+#5857 = DIRECTION('',(0.,-1.));+#5858 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5859 = ORIENTED_EDGE('',*,*,#5860,.F.);+#5860 = EDGE_CURVE('',#5861,#5833,#5863,.T.);+#5861 = VERTEX_POINT('',#5862);+#5862 = CARTESIAN_POINT('',(-2.35,-2.125,0.595));+#5863 = SURFACE_CURVE('',#5864,(#5868,#5875),.PCURVE_S1.);+#5864 = LINE('',#5865,#5866);+#5865 = CARTESIAN_POINT('',(-2.35,-2.125,0.595));+#5866 = VECTOR('',#5867,1.);+#5867 = DIRECTION('',(0.,-1.,0.));+#5868 = PCURVE('',#5808,#5869);+#5869 = DEFINITIONAL_REPRESENTATION('',(#5870),#5874);+#5870 = LINE('',#5871,#5872);+#5871 = CARTESIAN_POINT('',(0.2,0.15));+#5872 = VECTOR('',#5873,1.);+#5873 = DIRECTION('',(0.,-1.));+#5874 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5875 = PCURVE('',#5876,#5881);+#5876 = PLANE('',#5877);+#5877 = AXIS2_PLACEMENT_3D('',#5878,#5879,#5880);+#5878 = CARTESIAN_POINT('',(-2.35,-2.275,0.595));+#5879 = DIRECTION('',(0.839949759337,0.,-0.542664170358));+#5880 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#5881 = DEFINITIONAL_REPRESENTATION('',(#5882),#5886);+#5882 = LINE('',#5883,#5884);+#5883 = CARTESIAN_POINT('',(0.,0.15));+#5884 = VECTOR('',#5885,1.);+#5885 = DIRECTION('',(-0.,-1.));+#5886 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5887 = ORIENTED_EDGE('',*,*,#5888,.F.);+#5888 = EDGE_CURVE('',#5800,#5861,#5889,.T.);+#5889 = SURFACE_CURVE('',#5890,(#5894,#5901),.PCURVE_S1.);+#5890 = LINE('',#5891,#5892);+#5891 = CARTESIAN_POINT('',(-2.15,-2.125,0.595));+#5892 = VECTOR('',#5893,1.);+#5893 = DIRECTION('',(-1.,0.,0.));+#5894 = PCURVE('',#5808,#5895);+#5895 = DEFINITIONAL_REPRESENTATION('',(#5896),#5900);+#5896 = LINE('',#5897,#5898);+#5897 = CARTESIAN_POINT('',(0.,0.15));+#5898 = VECTOR('',#5899,1.);+#5899 = DIRECTION('',(1.,0.));+#5900 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5901 = PCURVE('',#5902,#5907);+#5902 = PLANE('',#5903);+#5903 = AXIS2_PLACEMENT_3D('',#5904,#5905,#5906);+#5904 = CARTESIAN_POINT('',(-2.634182274245,-2.125,0.217942023204));+#5905 = DIRECTION('',(-0.,-1.,-0.));+#5906 = DIRECTION('',(0.,0.,-1.));+#5907 = DEFINITIONAL_REPRESENTATION('',(#5908),#5912);+#5908 = LINE('',#5909,#5910);+#5909 = CARTESIAN_POINT('',(-0.377057976796,0.484182274245));+#5910 = VECTOR('',#5911,1.);+#5911 = DIRECTION('',(0.,-1.));+#5912 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5913 = ADVANCED_FACE('',(#5914),#5902,.F.);+#5914 = FACE_BOUND('',#5915,.F.);+#5915 = EDGE_LOOP('',(#5916,#5917,#5940,#5968,#5996,#6024,#6052,#6080));+#5916 = ORIENTED_EDGE('',*,*,#5888,.T.);+#5917 = ORIENTED_EDGE('',*,*,#5918,.T.);+#5918 = EDGE_CURVE('',#5861,#5919,#5921,.T.);+#5919 = VERTEX_POINT('',#5920);+#5920 = CARTESIAN_POINT('',(-2.6375,-2.125,0.15));+#5921 = SURFACE_CURVE('',#5922,(#5926,#5933),.PCURVE_S1.);+#5922 = LINE('',#5923,#5924);+#5923 = CARTESIAN_POINT('',(-2.35,-2.125,0.595));+#5924 = VECTOR('',#5925,1.);+#5925 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#5926 = PCURVE('',#5902,#5927);+#5927 = DEFINITIONAL_REPRESENTATION('',(#5928),#5932);+#5928 = LINE('',#5929,#5930);+#5929 = CARTESIAN_POINT('',(-0.377057976796,0.284182274245));+#5930 = VECTOR('',#5931,1.);+#5931 = DIRECTION('',(0.839949759337,-0.542664170358));+#5932 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5933 = PCURVE('',#5876,#5934);+#5934 = DEFINITIONAL_REPRESENTATION('',(#5935),#5939);+#5935 = LINE('',#5936,#5937);+#5936 = CARTESIAN_POINT('',(0.,0.15));+#5937 = VECTOR('',#5938,1.);+#5938 = DIRECTION('',(1.,0.));+#5939 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5940 = ORIENTED_EDGE('',*,*,#5941,.T.);+#5941 = EDGE_CURVE('',#5919,#5942,#5944,.T.);+#5942 = VERTEX_POINT('',#5943);+#5943 = CARTESIAN_POINT('',(-3.205,-2.125,0.15));+#5944 = SURFACE_CURVE('',#5945,(#5949,#5956),.PCURVE_S1.);+#5945 = LINE('',#5946,#5947);+#5946 = CARTESIAN_POINT('',(-2.6375,-2.125,0.15));+#5947 = VECTOR('',#5948,1.);+#5948 = DIRECTION('',(-1.,0.,0.));+#5949 = PCURVE('',#5902,#5950);+#5950 = DEFINITIONAL_REPRESENTATION('',(#5951),#5955);+#5951 = LINE('',#5952,#5953);+#5952 = CARTESIAN_POINT('',(6.7942023204E-02,-3.317725755E-03));+#5953 = VECTOR('',#5954,1.);+#5954 = DIRECTION('',(0.,-1.));+#5955 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5956 = PCURVE('',#5957,#5962);+#5957 = PLANE('',#5958);+#5958 = AXIS2_PLACEMENT_3D('',#5959,#5960,#5961);+#5959 = CARTESIAN_POINT('',(-2.6375,-2.275,0.15));+#5960 = DIRECTION('',(-0.,-0.,-1.));+#5961 = DIRECTION('',(-1.,0.,0.));+#5962 = DEFINITIONAL_REPRESENTATION('',(#5963),#5967);+#5963 = LINE('',#5964,#5965);+#5964 = CARTESIAN_POINT('',(0.,0.15));+#5965 = VECTOR('',#5966,1.);+#5966 = DIRECTION('',(1.,0.));+#5967 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5968 = ORIENTED_EDGE('',*,*,#5969,.T.);+#5969 = EDGE_CURVE('',#5942,#5970,#5972,.T.);+#5970 = VERTEX_POINT('',#5971);+#5971 = CARTESIAN_POINT('',(-3.205,-2.125,0.));+#5972 = SURFACE_CURVE('',#5973,(#5977,#5984),.PCURVE_S1.);+#5973 = LINE('',#5974,#5975);+#5974 = CARTESIAN_POINT('',(-3.205,-2.125,0.15));+#5975 = VECTOR('',#5976,1.);+#5976 = DIRECTION('',(0.,0.,-1.));+#5977 = PCURVE('',#5902,#5978);+#5978 = DEFINITIONAL_REPRESENTATION('',(#5979),#5983);+#5979 = LINE('',#5980,#5981);+#5980 = CARTESIAN_POINT('',(6.7942023204E-02,-0.570817725755));+#5981 = VECTOR('',#5982,1.);+#5982 = DIRECTION('',(1.,0.));+#5983 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5984 = PCURVE('',#5985,#5990);+#5985 = PLANE('',#5986);+#5986 = AXIS2_PLACEMENT_3D('',#5987,#5988,#5989);+#5987 = CARTESIAN_POINT('',(-3.205,-2.275,0.15));+#5988 = DIRECTION('',(1.,0.,0.));+#5989 = DIRECTION('',(0.,0.,-1.));+#5990 = DEFINITIONAL_REPRESENTATION('',(#5991),#5995);+#5991 = LINE('',#5992,#5993);+#5992 = CARTESIAN_POINT('',(0.,0.15));+#5993 = VECTOR('',#5994,1.);+#5994 = DIRECTION('',(1.,0.));+#5995 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5996 = ORIENTED_EDGE('',*,*,#5997,.T.);+#5997 = EDGE_CURVE('',#5970,#5998,#6000,.T.);+#5998 = VERTEX_POINT('',#5999);+#5999 = CARTESIAN_POINT('',(-2.4875,-2.125,0.));+#6000 = SURFACE_CURVE('',#6001,(#6005,#6012),.PCURVE_S1.);+#6001 = LINE('',#6002,#6003);+#6002 = CARTESIAN_POINT('',(-3.205,-2.125,0.));+#6003 = VECTOR('',#6004,1.);+#6004 = DIRECTION('',(1.,0.,0.));+#6005 = PCURVE('',#5902,#6006);+#6006 = DEFINITIONAL_REPRESENTATION('',(#6007),#6011);+#6007 = LINE('',#6008,#6009);+#6008 = CARTESIAN_POINT('',(0.217942023204,-0.570817725755));+#6009 = VECTOR('',#6010,1.);+#6010 = DIRECTION('',(0.,1.));+#6011 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6012 = PCURVE('',#6013,#6018);+#6013 = PLANE('',#6014);+#6014 = AXIS2_PLACEMENT_3D('',#6015,#6016,#6017);+#6015 = CARTESIAN_POINT('',(-3.205,-2.275,0.));+#6016 = DIRECTION('',(0.,0.,1.));+#6017 = DIRECTION('',(1.,0.,0.));+#6018 = DEFINITIONAL_REPRESENTATION('',(#6019),#6023);+#6019 = LINE('',#6020,#6021);+#6020 = CARTESIAN_POINT('',(0.,0.15));+#6021 = VECTOR('',#6022,1.);+#6022 = DIRECTION('',(1.,0.));+#6023 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6024 = ORIENTED_EDGE('',*,*,#6025,.T.);+#6025 = EDGE_CURVE('',#5998,#6026,#6028,.T.);+#6026 = VERTEX_POINT('',#6027);+#6027 = CARTESIAN_POINT('',(-2.2,-2.125,0.445));+#6028 = SURFACE_CURVE('',#6029,(#6033,#6040),.PCURVE_S1.);+#6029 = LINE('',#6030,#6031);+#6030 = CARTESIAN_POINT('',(-2.4875,-2.125,0.));+#6031 = VECTOR('',#6032,1.);+#6032 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#6033 = PCURVE('',#5902,#6034);+#6034 = DEFINITIONAL_REPRESENTATION('',(#6035),#6039);+#6035 = LINE('',#6036,#6037);+#6036 = CARTESIAN_POINT('',(0.217942023204,0.146682274245));+#6037 = VECTOR('',#6038,1.);+#6038 = DIRECTION('',(-0.839949759337,0.542664170358));+#6039 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6040 = PCURVE('',#6041,#6046);+#6041 = PLANE('',#6042);+#6042 = AXIS2_PLACEMENT_3D('',#6043,#6044,#6045);+#6043 = CARTESIAN_POINT('',(-2.4875,-2.275,0.));+#6044 = DIRECTION('',(-0.839949759337,0.,0.542664170358));+#6045 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#6046 = DEFINITIONAL_REPRESENTATION('',(#6047),#6051);+#6047 = LINE('',#6048,#6049);+#6048 = CARTESIAN_POINT('',(0.,0.15));+#6049 = VECTOR('',#6050,1.);+#6050 = DIRECTION('',(1.,0.));+#6051 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6052 = ORIENTED_EDGE('',*,*,#6053,.T.);+#6053 = EDGE_CURVE('',#6026,#6054,#6056,.T.);+#6054 = VERTEX_POINT('',#6055);+#6055 = CARTESIAN_POINT('',(-2.15,-2.125,0.445));+#6056 = SURFACE_CURVE('',#6057,(#6061,#6068),.PCURVE_S1.);+#6057 = LINE('',#6058,#6059);+#6058 = CARTESIAN_POINT('',(-2.2,-2.125,0.445));+#6059 = VECTOR('',#6060,1.);+#6060 = DIRECTION('',(1.,0.,0.));+#6061 = PCURVE('',#5902,#6062);+#6062 = DEFINITIONAL_REPRESENTATION('',(#6063),#6067);+#6063 = LINE('',#6064,#6065);+#6064 = CARTESIAN_POINT('',(-0.227057976796,0.434182274245));+#6065 = VECTOR('',#6066,1.);+#6066 = DIRECTION('',(0.,1.));+#6067 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6068 = PCURVE('',#6069,#6074);+#6069 = PLANE('',#6070);+#6070 = AXIS2_PLACEMENT_3D('',#6071,#6072,#6073);+#6071 = CARTESIAN_POINT('',(-2.2,-2.275,0.445));+#6072 = DIRECTION('',(0.,0.,1.));+#6073 = DIRECTION('',(1.,0.,0.));+#6074 = DEFINITIONAL_REPRESENTATION('',(#6075),#6079);+#6075 = LINE('',#6076,#6077);+#6076 = CARTESIAN_POINT('',(0.,0.15));+#6077 = VECTOR('',#6078,1.);+#6078 = DIRECTION('',(1.,0.));+#6079 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6080 = ORIENTED_EDGE('',*,*,#6081,.T.);+#6081 = EDGE_CURVE('',#6054,#5800,#6082,.T.);+#6082 = SURFACE_CURVE('',#6083,(#6087,#6094),.PCURVE_S1.);+#6083 = LINE('',#6084,#6085);+#6084 = CARTESIAN_POINT('',(-2.15,-2.125,0.445));+#6085 = VECTOR('',#6086,1.);+#6086 = DIRECTION('',(0.,0.,1.));+#6087 = PCURVE('',#5902,#6088);+#6088 = DEFINITIONAL_REPRESENTATION('',(#6089),#6093);+#6089 = LINE('',#6090,#6091);+#6090 = CARTESIAN_POINT('',(-0.227057976796,0.484182274245));+#6091 = VECTOR('',#6092,1.);+#6092 = DIRECTION('',(-1.,0.));+#6093 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6094 = PCURVE('',#5820,#6095);+#6095 = DEFINITIONAL_REPRESENTATION('',(#6096),#6100);+#6096 = LINE('',#6097,#6098);+#6097 = CARTESIAN_POINT('',(0.,0.15));+#6098 = VECTOR('',#6099,1.);+#6099 = DIRECTION('',(1.,0.));+#6100 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6101 = ADVANCED_FACE('',(#6102),#6069,.F.);+#6102 = FACE_BOUND('',#6103,.F.);+#6103 = EDGE_LOOP('',(#6104,#6127,#6150,#6171));+#6104 = ORIENTED_EDGE('',*,*,#6105,.F.);+#6105 = EDGE_CURVE('',#6106,#6026,#6108,.T.);+#6106 = VERTEX_POINT('',#6107);+#6107 = CARTESIAN_POINT('',(-2.2,-2.425,0.445));+#6108 = SURFACE_CURVE('',#6109,(#6113,#6120),.PCURVE_S1.);+#6109 = LINE('',#6110,#6111);+#6110 = CARTESIAN_POINT('',(-2.2,-2.425,0.445));+#6111 = VECTOR('',#6112,1.);+#6112 = DIRECTION('',(0.,1.,0.));+#6113 = PCURVE('',#6069,#6114);+#6114 = DEFINITIONAL_REPRESENTATION('',(#6115),#6119);+#6115 = LINE('',#6116,#6117);+#6116 = CARTESIAN_POINT('',(0.,-0.15));+#6117 = VECTOR('',#6118,1.);+#6118 = DIRECTION('',(0.,1.));+#6119 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6120 = PCURVE('',#6041,#6121);+#6121 = DEFINITIONAL_REPRESENTATION('',(#6122),#6126);+#6122 = LINE('',#6123,#6124);+#6123 = CARTESIAN_POINT('',(0.529793591883,-0.15));+#6124 = VECTOR('',#6125,1.);+#6125 = DIRECTION('',(0.,1.));+#6126 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6127 = ORIENTED_EDGE('',*,*,#6128,.T.);+#6128 = EDGE_CURVE('',#6106,#6129,#6131,.T.);+#6129 = VERTEX_POINT('',#6130);+#6130 = CARTESIAN_POINT('',(-2.15,-2.425,0.445));+#6131 = SURFACE_CURVE('',#6132,(#6136,#6143),.PCURVE_S1.);+#6132 = LINE('',#6133,#6134);+#6133 = CARTESIAN_POINT('',(-2.2,-2.425,0.445));+#6134 = VECTOR('',#6135,1.);+#6135 = DIRECTION('',(1.,0.,0.));+#6136 = PCURVE('',#6069,#6137);+#6137 = DEFINITIONAL_REPRESENTATION('',(#6138),#6142);+#6138 = LINE('',#6139,#6140);+#6139 = CARTESIAN_POINT('',(0.,-0.15));+#6140 = VECTOR('',#6141,1.);+#6141 = DIRECTION('',(1.,0.));+#6142 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6143 = PCURVE('',#5848,#6144);+#6144 = DEFINITIONAL_REPRESENTATION('',(#6145),#6149);+#6145 = LINE('',#6146,#6147);+#6146 = CARTESIAN_POINT('',(-0.227057976796,0.434182274245));+#6147 = VECTOR('',#6148,1.);+#6148 = DIRECTION('',(0.,1.));+#6149 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6150 = ORIENTED_EDGE('',*,*,#6151,.T.);+#6151 = EDGE_CURVE('',#6129,#6054,#6152,.T.);+#6152 = SURFACE_CURVE('',#6153,(#6157,#6164),.PCURVE_S1.);+#6153 = LINE('',#6154,#6155);+#6154 = CARTESIAN_POINT('',(-2.15,-2.425,0.445));+#6155 = VECTOR('',#6156,1.);+#6156 = DIRECTION('',(0.,1.,0.));+#6157 = PCURVE('',#6069,#6158);+#6158 = DEFINITIONAL_REPRESENTATION('',(#6159),#6163);+#6159 = LINE('',#6160,#6161);+#6160 = CARTESIAN_POINT('',(5.E-02,-0.15));+#6161 = VECTOR('',#6162,1.);+#6162 = DIRECTION('',(0.,1.));+#6163 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6164 = PCURVE('',#5820,#6165);+#6165 = DEFINITIONAL_REPRESENTATION('',(#6166),#6170);+#6166 = LINE('',#6167,#6168);+#6167 = CARTESIAN_POINT('',(0.,-0.15));+#6168 = VECTOR('',#6169,1.);+#6169 = DIRECTION('',(0.,1.));+#6170 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6171 = ORIENTED_EDGE('',*,*,#6053,.F.);+#6172 = ADVANCED_FACE('',(#6173),#6041,.F.);+#6173 = FACE_BOUND('',#6174,.F.);+#6174 = EDGE_LOOP('',(#6175,#6198,#6199,#6200));+#6175 = ORIENTED_EDGE('',*,*,#6176,.T.);+#6176 = EDGE_CURVE('',#6177,#6106,#6179,.T.);+#6177 = VERTEX_POINT('',#6178);+#6178 = CARTESIAN_POINT('',(-2.4875,-2.425,0.));+#6179 = SURFACE_CURVE('',#6180,(#6184,#6191),.PCURVE_S1.);+#6180 = LINE('',#6181,#6182);+#6181 = CARTESIAN_POINT('',(-2.4875,-2.425,0.));+#6182 = VECTOR('',#6183,1.);+#6183 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#6184 = PCURVE('',#6041,#6185);+#6185 = DEFINITIONAL_REPRESENTATION('',(#6186),#6190);+#6186 = LINE('',#6187,#6188);+#6187 = CARTESIAN_POINT('',(0.,-0.15));+#6188 = VECTOR('',#6189,1.);+#6189 = DIRECTION('',(1.,0.));+#6190 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6191 = PCURVE('',#5848,#6192);+#6192 = DEFINITIONAL_REPRESENTATION('',(#6193),#6197);+#6193 = LINE('',#6194,#6195);+#6194 = CARTESIAN_POINT('',(0.217942023204,0.146682274245));+#6195 = VECTOR('',#6196,1.);+#6196 = DIRECTION('',(-0.839949759337,0.542664170358));+#6197 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6198 = ORIENTED_EDGE('',*,*,#6105,.T.);+#6199 = ORIENTED_EDGE('',*,*,#6025,.F.);+#6200 = ORIENTED_EDGE('',*,*,#6201,.T.);+#6201 = EDGE_CURVE('',#5998,#6177,#6202,.T.);+#6202 = SURFACE_CURVE('',#6203,(#6207,#6214),.PCURVE_S1.);+#6203 = LINE('',#6204,#6205);+#6204 = CARTESIAN_POINT('',(-2.4875,-2.125,0.));+#6205 = VECTOR('',#6206,1.);+#6206 = DIRECTION('',(0.,-1.,0.));+#6207 = PCURVE('',#6041,#6208);+#6208 = DEFINITIONAL_REPRESENTATION('',(#6209),#6213);+#6209 = LINE('',#6210,#6211);+#6210 = CARTESIAN_POINT('',(0.,0.15));+#6211 = VECTOR('',#6212,1.);+#6212 = DIRECTION('',(0.,-1.));+#6213 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6214 = PCURVE('',#6013,#6215);+#6215 = DEFINITIONAL_REPRESENTATION('',(#6216),#6220);+#6216 = LINE('',#6217,#6218);+#6217 = CARTESIAN_POINT('',(0.7175,0.15));+#6218 = VECTOR('',#6219,1.);+#6219 = DIRECTION('',(0.,-1.));+#6220 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6221 = ADVANCED_FACE('',(#6222),#6013,.F.);+#6222 = FACE_BOUND('',#6223,.F.);+#6223 = EDGE_LOOP('',(#6224,#6247,#6248,#6249));+#6224 = ORIENTED_EDGE('',*,*,#6225,.T.);+#6225 = EDGE_CURVE('',#6226,#6177,#6228,.T.);+#6226 = VERTEX_POINT('',#6227);+#6227 = CARTESIAN_POINT('',(-3.205,-2.425,0.));+#6228 = SURFACE_CURVE('',#6229,(#6233,#6240),.PCURVE_S1.);+#6229 = LINE('',#6230,#6231);+#6230 = CARTESIAN_POINT('',(-3.205,-2.425,0.));+#6231 = VECTOR('',#6232,1.);+#6232 = DIRECTION('',(1.,0.,0.));+#6233 = PCURVE('',#6013,#6234);+#6234 = DEFINITIONAL_REPRESENTATION('',(#6235),#6239);+#6235 = LINE('',#6236,#6237);+#6236 = CARTESIAN_POINT('',(0.,-0.15));+#6237 = VECTOR('',#6238,1.);+#6238 = DIRECTION('',(1.,0.));+#6239 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6240 = PCURVE('',#5848,#6241);+#6241 = DEFINITIONAL_REPRESENTATION('',(#6242),#6246);+#6242 = LINE('',#6243,#6244);+#6243 = CARTESIAN_POINT('',(0.217942023204,-0.570817725755));+#6244 = VECTOR('',#6245,1.);+#6245 = DIRECTION('',(0.,1.));+#6246 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6247 = ORIENTED_EDGE('',*,*,#6201,.F.);+#6248 = ORIENTED_EDGE('',*,*,#5997,.F.);+#6249 = ORIENTED_EDGE('',*,*,#6250,.T.);+#6250 = EDGE_CURVE('',#5970,#6226,#6251,.T.);+#6251 = SURFACE_CURVE('',#6252,(#6256,#6263),.PCURVE_S1.);+#6252 = LINE('',#6253,#6254);+#6253 = CARTESIAN_POINT('',(-3.205,-2.125,0.));+#6254 = VECTOR('',#6255,1.);+#6255 = DIRECTION('',(0.,-1.,0.));+#6256 = PCURVE('',#6013,#6257);+#6257 = DEFINITIONAL_REPRESENTATION('',(#6258),#6262);+#6258 = LINE('',#6259,#6260);+#6259 = CARTESIAN_POINT('',(0.,0.15));+#6260 = VECTOR('',#6261,1.);+#6261 = DIRECTION('',(0.,-1.));+#6262 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6263 = PCURVE('',#5985,#6264);+#6264 = DEFINITIONAL_REPRESENTATION('',(#6265),#6269);+#6265 = LINE('',#6266,#6267);+#6266 = CARTESIAN_POINT('',(0.15,0.15));+#6267 = VECTOR('',#6268,1.);+#6268 = DIRECTION('',(0.,-1.));+#6269 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6270 = ADVANCED_FACE('',(#6271),#5985,.F.);+#6271 = FACE_BOUND('',#6272,.F.);+#6272 = EDGE_LOOP('',(#6273,#6296,#6297,#6298));+#6273 = ORIENTED_EDGE('',*,*,#6274,.T.);+#6274 = EDGE_CURVE('',#6275,#6226,#6277,.T.);+#6275 = VERTEX_POINT('',#6276);+#6276 = CARTESIAN_POINT('',(-3.205,-2.425,0.15));+#6277 = SURFACE_CURVE('',#6278,(#6282,#6289),.PCURVE_S1.);+#6278 = LINE('',#6279,#6280);+#6279 = CARTESIAN_POINT('',(-3.205,-2.425,0.15));+#6280 = VECTOR('',#6281,1.);+#6281 = DIRECTION('',(0.,0.,-1.));+#6282 = PCURVE('',#5985,#6283);+#6283 = DEFINITIONAL_REPRESENTATION('',(#6284),#6288);+#6284 = LINE('',#6285,#6286);+#6285 = CARTESIAN_POINT('',(0.,-0.15));+#6286 = VECTOR('',#6287,1.);+#6287 = DIRECTION('',(1.,0.));+#6288 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6289 = PCURVE('',#5848,#6290);+#6290 = DEFINITIONAL_REPRESENTATION('',(#6291),#6295);+#6291 = LINE('',#6292,#6293);+#6292 = CARTESIAN_POINT('',(6.7942023204E-02,-0.570817725755));+#6293 = VECTOR('',#6294,1.);+#6294 = DIRECTION('',(1.,0.));+#6295 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6296 = ORIENTED_EDGE('',*,*,#6250,.F.);+#6297 = ORIENTED_EDGE('',*,*,#5969,.F.);+#6298 = ORIENTED_EDGE('',*,*,#6299,.T.);+#6299 = EDGE_CURVE('',#5942,#6275,#6300,.T.);+#6300 = SURFACE_CURVE('',#6301,(#6305,#6312),.PCURVE_S1.);+#6301 = LINE('',#6302,#6303);+#6302 = CARTESIAN_POINT('',(-3.205,-2.125,0.15));+#6303 = VECTOR('',#6304,1.);+#6304 = DIRECTION('',(0.,-1.,0.));+#6305 = PCURVE('',#5985,#6306);+#6306 = DEFINITIONAL_REPRESENTATION('',(#6307),#6311);+#6307 = LINE('',#6308,#6309);+#6308 = CARTESIAN_POINT('',(0.,0.15));+#6309 = VECTOR('',#6310,1.);+#6310 = DIRECTION('',(0.,-1.));+#6311 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6312 = PCURVE('',#5957,#6313);+#6313 = DEFINITIONAL_REPRESENTATION('',(#6314),#6318);+#6314 = LINE('',#6315,#6316);+#6315 = CARTESIAN_POINT('',(0.5675,0.15));+#6316 = VECTOR('',#6317,1.);+#6317 = DIRECTION('',(0.,-1.));+#6318 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6319 = ADVANCED_FACE('',(#6320),#5957,.F.);+#6320 = FACE_BOUND('',#6321,.F.);+#6321 = EDGE_LOOP('',(#6322,#6345,#6346,#6347));+#6322 = ORIENTED_EDGE('',*,*,#6323,.T.);+#6323 = EDGE_CURVE('',#6324,#6275,#6326,.T.);+#6324 = VERTEX_POINT('',#6325);+#6325 = CARTESIAN_POINT('',(-2.6375,-2.425,0.15));+#6326 = SURFACE_CURVE('',#6327,(#6331,#6338),.PCURVE_S1.);+#6327 = LINE('',#6328,#6329);+#6328 = CARTESIAN_POINT('',(-2.6375,-2.425,0.15));+#6329 = VECTOR('',#6330,1.);+#6330 = DIRECTION('',(-1.,0.,0.));+#6331 = PCURVE('',#5957,#6332);+#6332 = DEFINITIONAL_REPRESENTATION('',(#6333),#6337);+#6333 = LINE('',#6334,#6335);+#6334 = CARTESIAN_POINT('',(0.,-0.15));+#6335 = VECTOR('',#6336,1.);+#6336 = DIRECTION('',(1.,0.));+#6337 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6338 = PCURVE('',#5848,#6339);+#6339 = DEFINITIONAL_REPRESENTATION('',(#6340),#6344);+#6340 = LINE('',#6341,#6342);+#6341 = CARTESIAN_POINT('',(6.7942023204E-02,-3.317725755E-03));+#6342 = VECTOR('',#6343,1.);+#6343 = DIRECTION('',(0.,-1.));+#6344 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6345 = ORIENTED_EDGE('',*,*,#6299,.F.);+#6346 = ORIENTED_EDGE('',*,*,#5941,.F.);+#6347 = ORIENTED_EDGE('',*,*,#6348,.T.);+#6348 = EDGE_CURVE('',#5919,#6324,#6349,.T.);+#6349 = SURFACE_CURVE('',#6350,(#6354,#6361),.PCURVE_S1.);+#6350 = LINE('',#6351,#6352);+#6351 = CARTESIAN_POINT('',(-2.6375,-2.125,0.15));+#6352 = VECTOR('',#6353,1.);+#6353 = DIRECTION('',(0.,-1.,0.));+#6354 = PCURVE('',#5957,#6355);+#6355 = DEFINITIONAL_REPRESENTATION('',(#6356),#6360);+#6356 = LINE('',#6357,#6358);+#6357 = CARTESIAN_POINT('',(0.,0.15));+#6358 = VECTOR('',#6359,1.);+#6359 = DIRECTION('',(0.,-1.));+#6360 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6361 = PCURVE('',#5876,#6362);+#6362 = DEFINITIONAL_REPRESENTATION('',(#6363),#6367);+#6363 = LINE('',#6364,#6365);+#6364 = CARTESIAN_POINT('',(0.529793591883,0.15));+#6365 = VECTOR('',#6366,1.);+#6366 = DIRECTION('',(-0.,-1.));+#6367 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6368 = ADVANCED_FACE('',(#6369),#5876,.F.);+#6369 = FACE_BOUND('',#6370,.F.);+#6370 = EDGE_LOOP('',(#6371,#6392,#6393,#6394));+#6371 = ORIENTED_EDGE('',*,*,#6372,.T.);+#6372 = EDGE_CURVE('',#5833,#6324,#6373,.T.);+#6373 = SURFACE_CURVE('',#6374,(#6378,#6385),.PCURVE_S1.);+#6374 = LINE('',#6375,#6376);+#6375 = CARTESIAN_POINT('',(-2.35,-2.425,0.595));+#6376 = VECTOR('',#6377,1.);+#6377 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#6378 = PCURVE('',#5876,#6379);+#6379 = DEFINITIONAL_REPRESENTATION('',(#6380),#6384);+#6380 = LINE('',#6381,#6382);+#6381 = CARTESIAN_POINT('',(-0.,-0.15));+#6382 = VECTOR('',#6383,1.);+#6383 = DIRECTION('',(1.,0.));+#6384 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6385 = PCURVE('',#5848,#6386);+#6386 = DEFINITIONAL_REPRESENTATION('',(#6387),#6391);+#6387 = LINE('',#6388,#6389);+#6388 = CARTESIAN_POINT('',(-0.377057976796,0.284182274245));+#6389 = VECTOR('',#6390,1.);+#6390 = DIRECTION('',(0.839949759337,-0.542664170358));+#6391 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6392 = ORIENTED_EDGE('',*,*,#6348,.F.);+#6393 = ORIENTED_EDGE('',*,*,#5918,.F.);+#6394 = ORIENTED_EDGE('',*,*,#5860,.T.);+#6395 = ADVANCED_FACE('',(#6396),#5848,.T.);+#6396 = FACE_BOUND('',#6397,.T.);+#6397 = EDGE_LOOP('',(#6398,#6399,#6400,#6401,#6402,#6403,#6404,#6405));+#6398 = ORIENTED_EDGE('',*,*,#5832,.T.);+#6399 = ORIENTED_EDGE('',*,*,#6372,.T.);+#6400 = ORIENTED_EDGE('',*,*,#6323,.T.);+#6401 = ORIENTED_EDGE('',*,*,#6274,.T.);+#6402 = ORIENTED_EDGE('',*,*,#6225,.T.);+#6403 = ORIENTED_EDGE('',*,*,#6176,.T.);+#6404 = ORIENTED_EDGE('',*,*,#6128,.T.);+#6405 = ORIENTED_EDGE('',*,*,#6406,.T.);+#6406 = EDGE_CURVE('',#6129,#5798,#6407,.T.);+#6407 = SURFACE_CURVE('',#6408,(#6412,#6419),.PCURVE_S1.);+#6408 = LINE('',#6409,#6410);+#6409 = CARTESIAN_POINT('',(-2.15,-2.425,0.445));+#6410 = VECTOR('',#6411,1.);+#6411 = DIRECTION('',(0.,0.,1.));+#6412 = PCURVE('',#5848,#6413);+#6413 = DEFINITIONAL_REPRESENTATION('',(#6414),#6418);+#6414 = LINE('',#6415,#6416);+#6415 = CARTESIAN_POINT('',(-0.227057976796,0.484182274245));+#6416 = VECTOR('',#6417,1.);+#6417 = DIRECTION('',(-1.,0.));+#6418 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6419 = PCURVE('',#5820,#6420);+#6420 = DEFINITIONAL_REPRESENTATION('',(#6421),#6425);+#6421 = LINE('',#6422,#6423);+#6422 = CARTESIAN_POINT('',(0.,-0.15));+#6423 = VECTOR('',#6424,1.);+#6424 = DIRECTION('',(1.,0.));+#6425 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6426 = ADVANCED_FACE('',(#6427),#5820,.F.);+#6427 = FACE_BOUND('',#6428,.F.);+#6428 = EDGE_LOOP('',(#6429,#6430,#6431,#6432));+#6429 = ORIENTED_EDGE('',*,*,#6151,.F.);+#6430 = ORIENTED_EDGE('',*,*,#6406,.T.);+#6431 = ORIENTED_EDGE('',*,*,#5797,.T.);+#6432 = ORIENTED_EDGE('',*,*,#6081,.F.);+#6433 = MANIFOLD_SOLID_BREP('',#6434);+#6434 = CLOSED_SHELL('',(#6435,#6555,#6743,#6814,#6863,#6912,#6961,#7010+ ,#7037,#7068));+#6435 = ADVANCED_FACE('',(#6436),#6450,.F.);+#6436 = FACE_BOUND('',#6437,.F.);+#6437 = EDGE_LOOP('',(#6438,#6473,#6501,#6529));+#6438 = ORIENTED_EDGE('',*,*,#6439,.F.);+#6439 = EDGE_CURVE('',#6440,#6442,#6444,.T.);+#6440 = VERTEX_POINT('',#6441);+#6441 = CARTESIAN_POINT('',(-2.15,-3.075,0.595));+#6442 = VERTEX_POINT('',#6443);+#6443 = CARTESIAN_POINT('',(-2.15,-2.775,0.595));+#6444 = SURFACE_CURVE('',#6445,(#6449,#6461),.PCURVE_S1.);+#6445 = LINE('',#6446,#6447);+#6446 = CARTESIAN_POINT('',(-2.15,-3.075,0.595));+#6447 = VECTOR('',#6448,1.);+#6448 = DIRECTION('',(0.,1.,0.));+#6449 = PCURVE('',#6450,#6455);+#6450 = PLANE('',#6451);+#6451 = AXIS2_PLACEMENT_3D('',#6452,#6453,#6454);+#6452 = CARTESIAN_POINT('',(-2.15,-2.925,0.595));+#6453 = DIRECTION('',(-0.,-0.,-1.));+#6454 = DIRECTION('',(-1.,0.,0.));+#6455 = DEFINITIONAL_REPRESENTATION('',(#6456),#6460);+#6456 = LINE('',#6457,#6458);+#6457 = CARTESIAN_POINT('',(0.,-0.15));+#6458 = VECTOR('',#6459,1.);+#6459 = DIRECTION('',(0.,1.));+#6460 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6461 = PCURVE('',#6462,#6467);+#6462 = PLANE('',#6463);+#6463 = AXIS2_PLACEMENT_3D('',#6464,#6465,#6466);+#6464 = CARTESIAN_POINT('',(-2.15,-2.925,0.445));+#6465 = DIRECTION('',(-1.,0.,0.));+#6466 = DIRECTION('',(0.,0.,1.));+#6467 = DEFINITIONAL_REPRESENTATION('',(#6468),#6472);+#6468 = LINE('',#6469,#6470);+#6469 = CARTESIAN_POINT('',(0.15,-0.15));+#6470 = VECTOR('',#6471,1.);+#6471 = DIRECTION('',(0.,1.));+#6472 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6473 = ORIENTED_EDGE('',*,*,#6474,.T.);+#6474 = EDGE_CURVE('',#6440,#6475,#6477,.T.);+#6475 = VERTEX_POINT('',#6476);+#6476 = CARTESIAN_POINT('',(-2.35,-3.075,0.595));+#6477 = SURFACE_CURVE('',#6478,(#6482,#6489),.PCURVE_S1.);+#6478 = LINE('',#6479,#6480);+#6479 = CARTESIAN_POINT('',(-2.15,-3.075,0.595));+#6480 = VECTOR('',#6481,1.);+#6481 = DIRECTION('',(-1.,0.,0.));+#6482 = PCURVE('',#6450,#6483);+#6483 = DEFINITIONAL_REPRESENTATION('',(#6484),#6488);+#6484 = LINE('',#6485,#6486);+#6485 = CARTESIAN_POINT('',(0.,-0.15));+#6486 = VECTOR('',#6487,1.);+#6487 = DIRECTION('',(1.,0.));+#6488 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6489 = PCURVE('',#6490,#6495);+#6490 = PLANE('',#6491);+#6491 = AXIS2_PLACEMENT_3D('',#6492,#6493,#6494);+#6492 = CARTESIAN_POINT('',(-2.634182274245,-3.075,0.217942023204));+#6493 = DIRECTION('',(-0.,-1.,-0.));+#6494 = DIRECTION('',(0.,0.,-1.));+#6495 = DEFINITIONAL_REPRESENTATION('',(#6496),#6500);+#6496 = LINE('',#6497,#6498);+#6497 = CARTESIAN_POINT('',(-0.377057976796,0.484182274245));+#6498 = VECTOR('',#6499,1.);+#6499 = DIRECTION('',(0.,-1.));+#6500 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6501 = ORIENTED_EDGE('',*,*,#6502,.F.);+#6502 = EDGE_CURVE('',#6503,#6475,#6505,.T.);+#6503 = VERTEX_POINT('',#6504);+#6504 = CARTESIAN_POINT('',(-2.35,-2.775,0.595));+#6505 = SURFACE_CURVE('',#6506,(#6510,#6517),.PCURVE_S1.);+#6506 = LINE('',#6507,#6508);+#6507 = CARTESIAN_POINT('',(-2.35,-2.775,0.595));+#6508 = VECTOR('',#6509,1.);+#6509 = DIRECTION('',(0.,-1.,0.));+#6510 = PCURVE('',#6450,#6511);+#6511 = DEFINITIONAL_REPRESENTATION('',(#6512),#6516);+#6512 = LINE('',#6513,#6514);+#6513 = CARTESIAN_POINT('',(0.2,0.15));+#6514 = VECTOR('',#6515,1.);+#6515 = DIRECTION('',(0.,-1.));+#6516 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6517 = PCURVE('',#6518,#6523);+#6518 = PLANE('',#6519);+#6519 = AXIS2_PLACEMENT_3D('',#6520,#6521,#6522);+#6520 = CARTESIAN_POINT('',(-2.35,-2.925,0.595));+#6521 = DIRECTION('',(0.839949759337,0.,-0.542664170358));+#6522 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#6523 = DEFINITIONAL_REPRESENTATION('',(#6524),#6528);+#6524 = LINE('',#6525,#6526);+#6525 = CARTESIAN_POINT('',(0.,0.15));+#6526 = VECTOR('',#6527,1.);+#6527 = DIRECTION('',(-0.,-1.));+#6528 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6529 = ORIENTED_EDGE('',*,*,#6530,.F.);+#6530 = EDGE_CURVE('',#6442,#6503,#6531,.T.);+#6531 = SURFACE_CURVE('',#6532,(#6536,#6543),.PCURVE_S1.);+#6532 = LINE('',#6533,#6534);+#6533 = CARTESIAN_POINT('',(-2.15,-2.775,0.595));+#6534 = VECTOR('',#6535,1.);+#6535 = DIRECTION('',(-1.,0.,0.));+#6536 = PCURVE('',#6450,#6537);+#6537 = DEFINITIONAL_REPRESENTATION('',(#6538),#6542);+#6538 = LINE('',#6539,#6540);+#6539 = CARTESIAN_POINT('',(0.,0.15));+#6540 = VECTOR('',#6541,1.);+#6541 = DIRECTION('',(1.,0.));+#6542 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6543 = PCURVE('',#6544,#6549);+#6544 = PLANE('',#6545);+#6545 = AXIS2_PLACEMENT_3D('',#6546,#6547,#6548);+#6546 = CARTESIAN_POINT('',(-2.634182274245,-2.775,0.217942023204));+#6547 = DIRECTION('',(-0.,-1.,-0.));+#6548 = DIRECTION('',(0.,0.,-1.));+#6549 = DEFINITIONAL_REPRESENTATION('',(#6550),#6554);+#6550 = LINE('',#6551,#6552);+#6551 = CARTESIAN_POINT('',(-0.377057976796,0.484182274245));+#6552 = VECTOR('',#6553,1.);+#6553 = DIRECTION('',(0.,-1.));+#6554 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6555 = ADVANCED_FACE('',(#6556),#6544,.F.);+#6556 = FACE_BOUND('',#6557,.F.);+#6557 = EDGE_LOOP('',(#6558,#6559,#6582,#6610,#6638,#6666,#6694,#6722));+#6558 = ORIENTED_EDGE('',*,*,#6530,.T.);+#6559 = ORIENTED_EDGE('',*,*,#6560,.T.);+#6560 = EDGE_CURVE('',#6503,#6561,#6563,.T.);+#6561 = VERTEX_POINT('',#6562);+#6562 = CARTESIAN_POINT('',(-2.6375,-2.775,0.15));+#6563 = SURFACE_CURVE('',#6564,(#6568,#6575),.PCURVE_S1.);+#6564 = LINE('',#6565,#6566);+#6565 = CARTESIAN_POINT('',(-2.35,-2.775,0.595));+#6566 = VECTOR('',#6567,1.);+#6567 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#6568 = PCURVE('',#6544,#6569);+#6569 = DEFINITIONAL_REPRESENTATION('',(#6570),#6574);+#6570 = LINE('',#6571,#6572);+#6571 = CARTESIAN_POINT('',(-0.377057976796,0.284182274245));+#6572 = VECTOR('',#6573,1.);+#6573 = DIRECTION('',(0.839949759337,-0.542664170358));+#6574 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6575 = PCURVE('',#6518,#6576);+#6576 = DEFINITIONAL_REPRESENTATION('',(#6577),#6581);+#6577 = LINE('',#6578,#6579);+#6578 = CARTESIAN_POINT('',(0.,0.15));+#6579 = VECTOR('',#6580,1.);+#6580 = DIRECTION('',(1.,0.));+#6581 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6582 = ORIENTED_EDGE('',*,*,#6583,.T.);+#6583 = EDGE_CURVE('',#6561,#6584,#6586,.T.);+#6584 = VERTEX_POINT('',#6585);+#6585 = CARTESIAN_POINT('',(-3.205,-2.775,0.15));+#6586 = SURFACE_CURVE('',#6587,(#6591,#6598),.PCURVE_S1.);+#6587 = LINE('',#6588,#6589);+#6588 = CARTESIAN_POINT('',(-2.6375,-2.775,0.15));+#6589 = VECTOR('',#6590,1.);+#6590 = DIRECTION('',(-1.,0.,0.));+#6591 = PCURVE('',#6544,#6592);+#6592 = DEFINITIONAL_REPRESENTATION('',(#6593),#6597);+#6593 = LINE('',#6594,#6595);+#6594 = CARTESIAN_POINT('',(6.7942023204E-02,-3.317725755E-03));+#6595 = VECTOR('',#6596,1.);+#6596 = DIRECTION('',(0.,-1.));+#6597 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6598 = PCURVE('',#6599,#6604);+#6599 = PLANE('',#6600);+#6600 = AXIS2_PLACEMENT_3D('',#6601,#6602,#6603);+#6601 = CARTESIAN_POINT('',(-2.6375,-2.925,0.15));+#6602 = DIRECTION('',(-0.,-0.,-1.));+#6603 = DIRECTION('',(-1.,0.,0.));+#6604 = DEFINITIONAL_REPRESENTATION('',(#6605),#6609);+#6605 = LINE('',#6606,#6607);+#6606 = CARTESIAN_POINT('',(0.,0.15));+#6607 = VECTOR('',#6608,1.);+#6608 = DIRECTION('',(1.,0.));+#6609 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6610 = ORIENTED_EDGE('',*,*,#6611,.T.);+#6611 = EDGE_CURVE('',#6584,#6612,#6614,.T.);+#6612 = VERTEX_POINT('',#6613);+#6613 = CARTESIAN_POINT('',(-3.205,-2.775,0.));+#6614 = SURFACE_CURVE('',#6615,(#6619,#6626),.PCURVE_S1.);+#6615 = LINE('',#6616,#6617);+#6616 = CARTESIAN_POINT('',(-3.205,-2.775,0.15));+#6617 = VECTOR('',#6618,1.);+#6618 = DIRECTION('',(0.,0.,-1.));+#6619 = PCURVE('',#6544,#6620);+#6620 = DEFINITIONAL_REPRESENTATION('',(#6621),#6625);+#6621 = LINE('',#6622,#6623);+#6622 = CARTESIAN_POINT('',(6.7942023204E-02,-0.570817725755));+#6623 = VECTOR('',#6624,1.);+#6624 = DIRECTION('',(1.,0.));+#6625 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6626 = PCURVE('',#6627,#6632);+#6627 = PLANE('',#6628);+#6628 = AXIS2_PLACEMENT_3D('',#6629,#6630,#6631);+#6629 = CARTESIAN_POINT('',(-3.205,-2.925,0.15));+#6630 = DIRECTION('',(1.,0.,0.));+#6631 = DIRECTION('',(0.,0.,-1.));+#6632 = DEFINITIONAL_REPRESENTATION('',(#6633),#6637);+#6633 = LINE('',#6634,#6635);+#6634 = CARTESIAN_POINT('',(0.,0.15));+#6635 = VECTOR('',#6636,1.);+#6636 = DIRECTION('',(1.,0.));+#6637 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6638 = ORIENTED_EDGE('',*,*,#6639,.T.);+#6639 = EDGE_CURVE('',#6612,#6640,#6642,.T.);+#6640 = VERTEX_POINT('',#6641);+#6641 = CARTESIAN_POINT('',(-2.4875,-2.775,0.));+#6642 = SURFACE_CURVE('',#6643,(#6647,#6654),.PCURVE_S1.);+#6643 = LINE('',#6644,#6645);+#6644 = CARTESIAN_POINT('',(-3.205,-2.775,0.));+#6645 = VECTOR('',#6646,1.);+#6646 = DIRECTION('',(1.,0.,0.));+#6647 = PCURVE('',#6544,#6648);+#6648 = DEFINITIONAL_REPRESENTATION('',(#6649),#6653);+#6649 = LINE('',#6650,#6651);+#6650 = CARTESIAN_POINT('',(0.217942023204,-0.570817725755));+#6651 = VECTOR('',#6652,1.);+#6652 = DIRECTION('',(0.,1.));+#6653 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6654 = PCURVE('',#6655,#6660);+#6655 = PLANE('',#6656);+#6656 = AXIS2_PLACEMENT_3D('',#6657,#6658,#6659);+#6657 = CARTESIAN_POINT('',(-3.205,-2.925,0.));+#6658 = DIRECTION('',(0.,0.,1.));+#6659 = DIRECTION('',(1.,0.,0.));+#6660 = DEFINITIONAL_REPRESENTATION('',(#6661),#6665);+#6661 = LINE('',#6662,#6663);+#6662 = CARTESIAN_POINT('',(0.,0.15));+#6663 = VECTOR('',#6664,1.);+#6664 = DIRECTION('',(1.,0.));+#6665 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6666 = ORIENTED_EDGE('',*,*,#6667,.T.);+#6667 = EDGE_CURVE('',#6640,#6668,#6670,.T.);+#6668 = VERTEX_POINT('',#6669);+#6669 = CARTESIAN_POINT('',(-2.2,-2.775,0.445));+#6670 = SURFACE_CURVE('',#6671,(#6675,#6682),.PCURVE_S1.);+#6671 = LINE('',#6672,#6673);+#6672 = CARTESIAN_POINT('',(-2.4875,-2.775,0.));+#6673 = VECTOR('',#6674,1.);+#6674 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#6675 = PCURVE('',#6544,#6676);+#6676 = DEFINITIONAL_REPRESENTATION('',(#6677),#6681);+#6677 = LINE('',#6678,#6679);+#6678 = CARTESIAN_POINT('',(0.217942023204,0.146682274245));+#6679 = VECTOR('',#6680,1.);+#6680 = DIRECTION('',(-0.839949759337,0.542664170358));+#6681 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6682 = PCURVE('',#6683,#6688);+#6683 = PLANE('',#6684);+#6684 = AXIS2_PLACEMENT_3D('',#6685,#6686,#6687);+#6685 = CARTESIAN_POINT('',(-2.4875,-2.925,0.));+#6686 = DIRECTION('',(-0.839949759337,0.,0.542664170358));+#6687 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#6688 = DEFINITIONAL_REPRESENTATION('',(#6689),#6693);+#6689 = LINE('',#6690,#6691);+#6690 = CARTESIAN_POINT('',(0.,0.15));+#6691 = VECTOR('',#6692,1.);+#6692 = DIRECTION('',(1.,0.));+#6693 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6694 = ORIENTED_EDGE('',*,*,#6695,.T.);+#6695 = EDGE_CURVE('',#6668,#6696,#6698,.T.);+#6696 = VERTEX_POINT('',#6697);+#6697 = CARTESIAN_POINT('',(-2.15,-2.775,0.445));+#6698 = SURFACE_CURVE('',#6699,(#6703,#6710),.PCURVE_S1.);+#6699 = LINE('',#6700,#6701);+#6700 = CARTESIAN_POINT('',(-2.2,-2.775,0.445));+#6701 = VECTOR('',#6702,1.);+#6702 = DIRECTION('',(1.,0.,0.));+#6703 = PCURVE('',#6544,#6704);+#6704 = DEFINITIONAL_REPRESENTATION('',(#6705),#6709);+#6705 = LINE('',#6706,#6707);+#6706 = CARTESIAN_POINT('',(-0.227057976796,0.434182274245));+#6707 = VECTOR('',#6708,1.);+#6708 = DIRECTION('',(0.,1.));+#6709 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6710 = PCURVE('',#6711,#6716);+#6711 = PLANE('',#6712);+#6712 = AXIS2_PLACEMENT_3D('',#6713,#6714,#6715);+#6713 = CARTESIAN_POINT('',(-2.2,-2.925,0.445));+#6714 = DIRECTION('',(0.,0.,1.));+#6715 = DIRECTION('',(1.,0.,0.));+#6716 = DEFINITIONAL_REPRESENTATION('',(#6717),#6721);+#6717 = LINE('',#6718,#6719);+#6718 = CARTESIAN_POINT('',(0.,0.15));+#6719 = VECTOR('',#6720,1.);+#6720 = DIRECTION('',(1.,0.));+#6721 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6722 = ORIENTED_EDGE('',*,*,#6723,.T.);+#6723 = EDGE_CURVE('',#6696,#6442,#6724,.T.);+#6724 = SURFACE_CURVE('',#6725,(#6729,#6736),.PCURVE_S1.);+#6725 = LINE('',#6726,#6727);+#6726 = CARTESIAN_POINT('',(-2.15,-2.775,0.445));+#6727 = VECTOR('',#6728,1.);+#6728 = DIRECTION('',(0.,0.,1.));+#6729 = PCURVE('',#6544,#6730);+#6730 = DEFINITIONAL_REPRESENTATION('',(#6731),#6735);+#6731 = LINE('',#6732,#6733);+#6732 = CARTESIAN_POINT('',(-0.227057976796,0.484182274245));+#6733 = VECTOR('',#6734,1.);+#6734 = DIRECTION('',(-1.,0.));+#6735 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6736 = PCURVE('',#6462,#6737);+#6737 = DEFINITIONAL_REPRESENTATION('',(#6738),#6742);+#6738 = LINE('',#6739,#6740);+#6739 = CARTESIAN_POINT('',(0.,0.15));+#6740 = VECTOR('',#6741,1.);+#6741 = DIRECTION('',(1.,0.));+#6742 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6743 = ADVANCED_FACE('',(#6744),#6711,.F.);+#6744 = FACE_BOUND('',#6745,.F.);+#6745 = EDGE_LOOP('',(#6746,#6769,#6792,#6813));+#6746 = ORIENTED_EDGE('',*,*,#6747,.F.);+#6747 = EDGE_CURVE('',#6748,#6668,#6750,.T.);+#6748 = VERTEX_POINT('',#6749);+#6749 = CARTESIAN_POINT('',(-2.2,-3.075,0.445));+#6750 = SURFACE_CURVE('',#6751,(#6755,#6762),.PCURVE_S1.);+#6751 = LINE('',#6752,#6753);+#6752 = CARTESIAN_POINT('',(-2.2,-3.075,0.445));+#6753 = VECTOR('',#6754,1.);+#6754 = DIRECTION('',(0.,1.,0.));+#6755 = PCURVE('',#6711,#6756);+#6756 = DEFINITIONAL_REPRESENTATION('',(#6757),#6761);+#6757 = LINE('',#6758,#6759);+#6758 = CARTESIAN_POINT('',(0.,-0.15));+#6759 = VECTOR('',#6760,1.);+#6760 = DIRECTION('',(0.,1.));+#6761 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6762 = PCURVE('',#6683,#6763);+#6763 = DEFINITIONAL_REPRESENTATION('',(#6764),#6768);+#6764 = LINE('',#6765,#6766);+#6765 = CARTESIAN_POINT('',(0.529793591883,-0.15));+#6766 = VECTOR('',#6767,1.);+#6767 = DIRECTION('',(0.,1.));+#6768 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6769 = ORIENTED_EDGE('',*,*,#6770,.T.);+#6770 = EDGE_CURVE('',#6748,#6771,#6773,.T.);+#6771 = VERTEX_POINT('',#6772);+#6772 = CARTESIAN_POINT('',(-2.15,-3.075,0.445));+#6773 = SURFACE_CURVE('',#6774,(#6778,#6785),.PCURVE_S1.);+#6774 = LINE('',#6775,#6776);+#6775 = CARTESIAN_POINT('',(-2.2,-3.075,0.445));+#6776 = VECTOR('',#6777,1.);+#6777 = DIRECTION('',(1.,0.,0.));+#6778 = PCURVE('',#6711,#6779);+#6779 = DEFINITIONAL_REPRESENTATION('',(#6780),#6784);+#6780 = LINE('',#6781,#6782);+#6781 = CARTESIAN_POINT('',(0.,-0.15));+#6782 = VECTOR('',#6783,1.);+#6783 = DIRECTION('',(1.,0.));+#6784 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6785 = PCURVE('',#6490,#6786);+#6786 = DEFINITIONAL_REPRESENTATION('',(#6787),#6791);+#6787 = LINE('',#6788,#6789);+#6788 = CARTESIAN_POINT('',(-0.227057976796,0.434182274245));+#6789 = VECTOR('',#6790,1.);+#6790 = DIRECTION('',(0.,1.));+#6791 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6792 = ORIENTED_EDGE('',*,*,#6793,.T.);+#6793 = EDGE_CURVE('',#6771,#6696,#6794,.T.);+#6794 = SURFACE_CURVE('',#6795,(#6799,#6806),.PCURVE_S1.);+#6795 = LINE('',#6796,#6797);+#6796 = CARTESIAN_POINT('',(-2.15,-3.075,0.445));+#6797 = VECTOR('',#6798,1.);+#6798 = DIRECTION('',(0.,1.,0.));+#6799 = PCURVE('',#6711,#6800);+#6800 = DEFINITIONAL_REPRESENTATION('',(#6801),#6805);+#6801 = LINE('',#6802,#6803);+#6802 = CARTESIAN_POINT('',(5.E-02,-0.15));+#6803 = VECTOR('',#6804,1.);+#6804 = DIRECTION('',(0.,1.));+#6805 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6806 = PCURVE('',#6462,#6807);+#6807 = DEFINITIONAL_REPRESENTATION('',(#6808),#6812);+#6808 = LINE('',#6809,#6810);+#6809 = CARTESIAN_POINT('',(0.,-0.15));+#6810 = VECTOR('',#6811,1.);+#6811 = DIRECTION('',(0.,1.));+#6812 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6813 = ORIENTED_EDGE('',*,*,#6695,.F.);+#6814 = ADVANCED_FACE('',(#6815),#6683,.F.);+#6815 = FACE_BOUND('',#6816,.F.);+#6816 = EDGE_LOOP('',(#6817,#6840,#6841,#6842));+#6817 = ORIENTED_EDGE('',*,*,#6818,.T.);+#6818 = EDGE_CURVE('',#6819,#6748,#6821,.T.);+#6819 = VERTEX_POINT('',#6820);+#6820 = CARTESIAN_POINT('',(-2.4875,-3.075,0.));+#6821 = SURFACE_CURVE('',#6822,(#6826,#6833),.PCURVE_S1.);+#6822 = LINE('',#6823,#6824);+#6823 = CARTESIAN_POINT('',(-2.4875,-3.075,0.));+#6824 = VECTOR('',#6825,1.);+#6825 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#6826 = PCURVE('',#6683,#6827);+#6827 = DEFINITIONAL_REPRESENTATION('',(#6828),#6832);+#6828 = LINE('',#6829,#6830);+#6829 = CARTESIAN_POINT('',(0.,-0.15));+#6830 = VECTOR('',#6831,1.);+#6831 = DIRECTION('',(1.,0.));+#6832 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6833 = PCURVE('',#6490,#6834);+#6834 = DEFINITIONAL_REPRESENTATION('',(#6835),#6839);+#6835 = LINE('',#6836,#6837);+#6836 = CARTESIAN_POINT('',(0.217942023204,0.146682274245));+#6837 = VECTOR('',#6838,1.);+#6838 = DIRECTION('',(-0.839949759337,0.542664170358));+#6839 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6840 = ORIENTED_EDGE('',*,*,#6747,.T.);+#6841 = ORIENTED_EDGE('',*,*,#6667,.F.);+#6842 = ORIENTED_EDGE('',*,*,#6843,.T.);+#6843 = EDGE_CURVE('',#6640,#6819,#6844,.T.);+#6844 = SURFACE_CURVE('',#6845,(#6849,#6856),.PCURVE_S1.);+#6845 = LINE('',#6846,#6847);+#6846 = CARTESIAN_POINT('',(-2.4875,-2.775,0.));+#6847 = VECTOR('',#6848,1.);+#6848 = DIRECTION('',(0.,-1.,0.));+#6849 = PCURVE('',#6683,#6850);+#6850 = DEFINITIONAL_REPRESENTATION('',(#6851),#6855);+#6851 = LINE('',#6852,#6853);+#6852 = CARTESIAN_POINT('',(0.,0.15));+#6853 = VECTOR('',#6854,1.);+#6854 = DIRECTION('',(0.,-1.));+#6855 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6856 = PCURVE('',#6655,#6857);+#6857 = DEFINITIONAL_REPRESENTATION('',(#6858),#6862);+#6858 = LINE('',#6859,#6860);+#6859 = CARTESIAN_POINT('',(0.7175,0.15));+#6860 = VECTOR('',#6861,1.);+#6861 = DIRECTION('',(0.,-1.));+#6862 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6863 = ADVANCED_FACE('',(#6864),#6655,.F.);+#6864 = FACE_BOUND('',#6865,.F.);+#6865 = EDGE_LOOP('',(#6866,#6889,#6890,#6891));+#6866 = ORIENTED_EDGE('',*,*,#6867,.T.);+#6867 = EDGE_CURVE('',#6868,#6819,#6870,.T.);+#6868 = VERTEX_POINT('',#6869);+#6869 = CARTESIAN_POINT('',(-3.205,-3.075,0.));+#6870 = SURFACE_CURVE('',#6871,(#6875,#6882),.PCURVE_S1.);+#6871 = LINE('',#6872,#6873);+#6872 = CARTESIAN_POINT('',(-3.205,-3.075,0.));+#6873 = VECTOR('',#6874,1.);+#6874 = DIRECTION('',(1.,0.,0.));+#6875 = PCURVE('',#6655,#6876);+#6876 = DEFINITIONAL_REPRESENTATION('',(#6877),#6881);+#6877 = LINE('',#6878,#6879);+#6878 = CARTESIAN_POINT('',(0.,-0.15));+#6879 = VECTOR('',#6880,1.);+#6880 = DIRECTION('',(1.,0.));+#6881 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6882 = PCURVE('',#6490,#6883);+#6883 = DEFINITIONAL_REPRESENTATION('',(#6884),#6888);+#6884 = LINE('',#6885,#6886);+#6885 = CARTESIAN_POINT('',(0.217942023204,-0.570817725755));+#6886 = VECTOR('',#6887,1.);+#6887 = DIRECTION('',(0.,1.));+#6888 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6889 = ORIENTED_EDGE('',*,*,#6843,.F.);+#6890 = ORIENTED_EDGE('',*,*,#6639,.F.);+#6891 = ORIENTED_EDGE('',*,*,#6892,.T.);+#6892 = EDGE_CURVE('',#6612,#6868,#6893,.T.);+#6893 = SURFACE_CURVE('',#6894,(#6898,#6905),.PCURVE_S1.);+#6894 = LINE('',#6895,#6896);+#6895 = CARTESIAN_POINT('',(-3.205,-2.775,0.));+#6896 = VECTOR('',#6897,1.);+#6897 = DIRECTION('',(0.,-1.,0.));+#6898 = PCURVE('',#6655,#6899);+#6899 = DEFINITIONAL_REPRESENTATION('',(#6900),#6904);+#6900 = LINE('',#6901,#6902);+#6901 = CARTESIAN_POINT('',(0.,0.15));+#6902 = VECTOR('',#6903,1.);+#6903 = DIRECTION('',(0.,-1.));+#6904 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6905 = PCURVE('',#6627,#6906);+#6906 = DEFINITIONAL_REPRESENTATION('',(#6907),#6911);+#6907 = LINE('',#6908,#6909);+#6908 = CARTESIAN_POINT('',(0.15,0.15));+#6909 = VECTOR('',#6910,1.);+#6910 = DIRECTION('',(0.,-1.));+#6911 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6912 = ADVANCED_FACE('',(#6913),#6627,.F.);+#6913 = FACE_BOUND('',#6914,.F.);+#6914 = EDGE_LOOP('',(#6915,#6938,#6939,#6940));+#6915 = ORIENTED_EDGE('',*,*,#6916,.T.);+#6916 = EDGE_CURVE('',#6917,#6868,#6919,.T.);+#6917 = VERTEX_POINT('',#6918);+#6918 = CARTESIAN_POINT('',(-3.205,-3.075,0.15));+#6919 = SURFACE_CURVE('',#6920,(#6924,#6931),.PCURVE_S1.);+#6920 = LINE('',#6921,#6922);+#6921 = CARTESIAN_POINT('',(-3.205,-3.075,0.15));+#6922 = VECTOR('',#6923,1.);+#6923 = DIRECTION('',(0.,0.,-1.));+#6924 = PCURVE('',#6627,#6925);+#6925 = DEFINITIONAL_REPRESENTATION('',(#6926),#6930);+#6926 = LINE('',#6927,#6928);+#6927 = CARTESIAN_POINT('',(0.,-0.15));+#6928 = VECTOR('',#6929,1.);+#6929 = DIRECTION('',(1.,0.));+#6930 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6931 = PCURVE('',#6490,#6932);+#6932 = DEFINITIONAL_REPRESENTATION('',(#6933),#6937);+#6933 = LINE('',#6934,#6935);+#6934 = CARTESIAN_POINT('',(6.7942023204E-02,-0.570817725755));+#6935 = VECTOR('',#6936,1.);+#6936 = DIRECTION('',(1.,0.));+#6937 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6938 = ORIENTED_EDGE('',*,*,#6892,.F.);+#6939 = ORIENTED_EDGE('',*,*,#6611,.F.);+#6940 = ORIENTED_EDGE('',*,*,#6941,.T.);+#6941 = EDGE_CURVE('',#6584,#6917,#6942,.T.);+#6942 = SURFACE_CURVE('',#6943,(#6947,#6954),.PCURVE_S1.);+#6943 = LINE('',#6944,#6945);+#6944 = CARTESIAN_POINT('',(-3.205,-2.775,0.15));+#6945 = VECTOR('',#6946,1.);+#6946 = DIRECTION('',(0.,-1.,0.));+#6947 = PCURVE('',#6627,#6948);+#6948 = DEFINITIONAL_REPRESENTATION('',(#6949),#6953);+#6949 = LINE('',#6950,#6951);+#6950 = CARTESIAN_POINT('',(0.,0.15));+#6951 = VECTOR('',#6952,1.);+#6952 = DIRECTION('',(0.,-1.));+#6953 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6954 = PCURVE('',#6599,#6955);+#6955 = DEFINITIONAL_REPRESENTATION('',(#6956),#6960);+#6956 = LINE('',#6957,#6958);+#6957 = CARTESIAN_POINT('',(0.5675,0.15));+#6958 = VECTOR('',#6959,1.);+#6959 = DIRECTION('',(0.,-1.));+#6960 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6961 = ADVANCED_FACE('',(#6962),#6599,.F.);+#6962 = FACE_BOUND('',#6963,.F.);+#6963 = EDGE_LOOP('',(#6964,#6987,#6988,#6989));+#6964 = ORIENTED_EDGE('',*,*,#6965,.T.);+#6965 = EDGE_CURVE('',#6966,#6917,#6968,.T.);+#6966 = VERTEX_POINT('',#6967);+#6967 = CARTESIAN_POINT('',(-2.6375,-3.075,0.15));+#6968 = SURFACE_CURVE('',#6969,(#6973,#6980),.PCURVE_S1.);+#6969 = LINE('',#6970,#6971);+#6970 = CARTESIAN_POINT('',(-2.6375,-3.075,0.15));+#6971 = VECTOR('',#6972,1.);+#6972 = DIRECTION('',(-1.,0.,0.));+#6973 = PCURVE('',#6599,#6974);+#6974 = DEFINITIONAL_REPRESENTATION('',(#6975),#6979);+#6975 = LINE('',#6976,#6977);+#6976 = CARTESIAN_POINT('',(0.,-0.15));+#6977 = VECTOR('',#6978,1.);+#6978 = DIRECTION('',(1.,0.));+#6979 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6980 = PCURVE('',#6490,#6981);+#6981 = DEFINITIONAL_REPRESENTATION('',(#6982),#6986);+#6982 = LINE('',#6983,#6984);+#6983 = CARTESIAN_POINT('',(6.7942023204E-02,-3.317725755E-03));+#6984 = VECTOR('',#6985,1.);+#6985 = DIRECTION('',(0.,-1.));+#6986 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6987 = ORIENTED_EDGE('',*,*,#6941,.F.);+#6988 = ORIENTED_EDGE('',*,*,#6583,.F.);+#6989 = ORIENTED_EDGE('',*,*,#6990,.T.);+#6990 = EDGE_CURVE('',#6561,#6966,#6991,.T.);+#6991 = SURFACE_CURVE('',#6992,(#6996,#7003),.PCURVE_S1.);+#6992 = LINE('',#6993,#6994);+#6993 = CARTESIAN_POINT('',(-2.6375,-2.775,0.15));+#6994 = VECTOR('',#6995,1.);+#6995 = DIRECTION('',(0.,-1.,0.));+#6996 = PCURVE('',#6599,#6997);+#6997 = DEFINITIONAL_REPRESENTATION('',(#6998),#7002);+#6998 = LINE('',#6999,#7000);+#6999 = CARTESIAN_POINT('',(0.,0.15));+#7000 = VECTOR('',#7001,1.);+#7001 = DIRECTION('',(0.,-1.));+#7002 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7003 = PCURVE('',#6518,#7004);+#7004 = DEFINITIONAL_REPRESENTATION('',(#7005),#7009);+#7005 = LINE('',#7006,#7007);+#7006 = CARTESIAN_POINT('',(0.529793591883,0.15));+#7007 = VECTOR('',#7008,1.);+#7008 = DIRECTION('',(-0.,-1.));+#7009 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7010 = ADVANCED_FACE('',(#7011),#6518,.F.);+#7011 = FACE_BOUND('',#7012,.F.);+#7012 = EDGE_LOOP('',(#7013,#7034,#7035,#7036));+#7013 = ORIENTED_EDGE('',*,*,#7014,.T.);+#7014 = EDGE_CURVE('',#6475,#6966,#7015,.T.);+#7015 = SURFACE_CURVE('',#7016,(#7020,#7027),.PCURVE_S1.);+#7016 = LINE('',#7017,#7018);+#7017 = CARTESIAN_POINT('',(-2.35,-3.075,0.595));+#7018 = VECTOR('',#7019,1.);+#7019 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#7020 = PCURVE('',#6518,#7021);+#7021 = DEFINITIONAL_REPRESENTATION('',(#7022),#7026);+#7022 = LINE('',#7023,#7024);+#7023 = CARTESIAN_POINT('',(-0.,-0.15));+#7024 = VECTOR('',#7025,1.);+#7025 = DIRECTION('',(1.,0.));+#7026 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7027 = PCURVE('',#6490,#7028);+#7028 = DEFINITIONAL_REPRESENTATION('',(#7029),#7033);+#7029 = LINE('',#7030,#7031);+#7030 = CARTESIAN_POINT('',(-0.377057976796,0.284182274245));+#7031 = VECTOR('',#7032,1.);+#7032 = DIRECTION('',(0.839949759337,-0.542664170358));+#7033 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7034 = ORIENTED_EDGE('',*,*,#6990,.F.);+#7035 = ORIENTED_EDGE('',*,*,#6560,.F.);+#7036 = ORIENTED_EDGE('',*,*,#6502,.T.);+#7037 = ADVANCED_FACE('',(#7038),#6490,.T.);+#7038 = FACE_BOUND('',#7039,.T.);+#7039 = EDGE_LOOP('',(#7040,#7041,#7042,#7043,#7044,#7045,#7046,#7047));+#7040 = ORIENTED_EDGE('',*,*,#6474,.T.);+#7041 = ORIENTED_EDGE('',*,*,#7014,.T.);+#7042 = ORIENTED_EDGE('',*,*,#6965,.T.);+#7043 = ORIENTED_EDGE('',*,*,#6916,.T.);+#7044 = ORIENTED_EDGE('',*,*,#6867,.T.);+#7045 = ORIENTED_EDGE('',*,*,#6818,.T.);+#7046 = ORIENTED_EDGE('',*,*,#6770,.T.);+#7047 = ORIENTED_EDGE('',*,*,#7048,.T.);+#7048 = EDGE_CURVE('',#6771,#6440,#7049,.T.);+#7049 = SURFACE_CURVE('',#7050,(#7054,#7061),.PCURVE_S1.);+#7050 = LINE('',#7051,#7052);+#7051 = CARTESIAN_POINT('',(-2.15,-3.075,0.445));+#7052 = VECTOR('',#7053,1.);+#7053 = DIRECTION('',(0.,0.,1.));+#7054 = PCURVE('',#6490,#7055);+#7055 = DEFINITIONAL_REPRESENTATION('',(#7056),#7060);+#7056 = LINE('',#7057,#7058);+#7057 = CARTESIAN_POINT('',(-0.227057976796,0.484182274245));+#7058 = VECTOR('',#7059,1.);+#7059 = DIRECTION('',(-1.,0.));+#7060 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7061 = PCURVE('',#6462,#7062);+#7062 = DEFINITIONAL_REPRESENTATION('',(#7063),#7067);+#7063 = LINE('',#7064,#7065);+#7064 = CARTESIAN_POINT('',(0.,-0.15));+#7065 = VECTOR('',#7066,1.);+#7066 = DIRECTION('',(1.,0.));+#7067 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7068 = ADVANCED_FACE('',(#7069),#6462,.F.);+#7069 = FACE_BOUND('',#7070,.F.);+#7070 = EDGE_LOOP('',(#7071,#7072,#7073,#7074));+#7071 = ORIENTED_EDGE('',*,*,#6793,.F.);+#7072 = ORIENTED_EDGE('',*,*,#7048,.T.);+#7073 = ORIENTED_EDGE('',*,*,#6439,.T.);+#7074 = ORIENTED_EDGE('',*,*,#6723,.F.);+#7075 = MANIFOLD_SOLID_BREP('',#7076);+#7076 = CLOSED_SHELL('',(#7077,#7197,#7273,#7349,#7425,#7501,#7577,#7648+ ,#7679,#7706));+#7077 = ADVANCED_FACE('',(#7078),#7092,.T.);+#7078 = FACE_BOUND('',#7079,.T.);+#7079 = EDGE_LOOP('',(#7080,#7115,#7143,#7171));+#7080 = ORIENTED_EDGE('',*,*,#7081,.T.);+#7081 = EDGE_CURVE('',#7082,#7084,#7086,.T.);+#7082 = VERTEX_POINT('',#7083);+#7083 = CARTESIAN_POINT('',(2.15,-3.075,0.595));+#7084 = VERTEX_POINT('',#7085);+#7085 = CARTESIAN_POINT('',(2.35,-3.075,0.595));+#7086 = SURFACE_CURVE('',#7087,(#7091,#7103),.PCURVE_S1.);+#7087 = LINE('',#7088,#7089);+#7088 = CARTESIAN_POINT('',(2.15,-3.075,0.595));+#7089 = VECTOR('',#7090,1.);+#7090 = DIRECTION('',(1.,0.,0.));+#7091 = PCURVE('',#7092,#7097);+#7092 = PLANE('',#7093);+#7093 = AXIS2_PLACEMENT_3D('',#7094,#7095,#7096);+#7094 = CARTESIAN_POINT('',(2.15,-2.925,0.595));+#7095 = DIRECTION('',(0.,0.,1.));+#7096 = DIRECTION('',(1.,0.,0.));+#7097 = DEFINITIONAL_REPRESENTATION('',(#7098),#7102);+#7098 = LINE('',#7099,#7100);+#7099 = CARTESIAN_POINT('',(0.,-0.15));+#7100 = VECTOR('',#7101,1.);+#7101 = DIRECTION('',(1.,0.));+#7102 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7103 = PCURVE('',#7104,#7109);+#7104 = PLANE('',#7105);+#7105 = AXIS2_PLACEMENT_3D('',#7106,#7107,#7108);+#7106 = CARTESIAN_POINT('',(2.634182274245,-3.075,0.217942023204));+#7107 = DIRECTION('',(0.,1.,0.));+#7108 = DIRECTION('',(0.,0.,1.));+#7109 = DEFINITIONAL_REPRESENTATION('',(#7110),#7114);+#7110 = LINE('',#7111,#7112);+#7111 = CARTESIAN_POINT('',(0.377057976796,-0.484182274245));+#7112 = VECTOR('',#7113,1.);+#7113 = DIRECTION('',(0.,1.));+#7114 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7115 = ORIENTED_EDGE('',*,*,#7116,.T.);+#7116 = EDGE_CURVE('',#7084,#7117,#7119,.T.);+#7117 = VERTEX_POINT('',#7118);+#7118 = CARTESIAN_POINT('',(2.35,-2.775,0.595));+#7119 = SURFACE_CURVE('',#7120,(#7124,#7131),.PCURVE_S1.);+#7120 = LINE('',#7121,#7122);+#7121 = CARTESIAN_POINT('',(2.35,-3.075,0.595));+#7122 = VECTOR('',#7123,1.);+#7123 = DIRECTION('',(0.,1.,0.));+#7124 = PCURVE('',#7092,#7125);+#7125 = DEFINITIONAL_REPRESENTATION('',(#7126),#7130);+#7126 = LINE('',#7127,#7128);+#7127 = CARTESIAN_POINT('',(0.2,-0.15));+#7128 = VECTOR('',#7129,1.);+#7129 = DIRECTION('',(0.,1.));+#7130 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7131 = PCURVE('',#7132,#7137);+#7132 = PLANE('',#7133);+#7133 = AXIS2_PLACEMENT_3D('',#7134,#7135,#7136);+#7134 = CARTESIAN_POINT('',(2.35,-2.925,0.595));+#7135 = DIRECTION('',(0.839949759337,0.,0.542664170358));+#7136 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#7137 = DEFINITIONAL_REPRESENTATION('',(#7138),#7142);+#7138 = LINE('',#7139,#7140);+#7139 = CARTESIAN_POINT('',(0.,-0.15));+#7140 = VECTOR('',#7141,1.);+#7141 = DIRECTION('',(0.,1.));+#7142 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7143 = ORIENTED_EDGE('',*,*,#7144,.F.);+#7144 = EDGE_CURVE('',#7145,#7117,#7147,.T.);+#7145 = VERTEX_POINT('',#7146);+#7146 = CARTESIAN_POINT('',(2.15,-2.775,0.595));+#7147 = SURFACE_CURVE('',#7148,(#7152,#7159),.PCURVE_S1.);+#7148 = LINE('',#7149,#7150);+#7149 = CARTESIAN_POINT('',(2.15,-2.775,0.595));+#7150 = VECTOR('',#7151,1.);+#7151 = DIRECTION('',(1.,0.,0.));+#7152 = PCURVE('',#7092,#7153);+#7153 = DEFINITIONAL_REPRESENTATION('',(#7154),#7158);+#7154 = LINE('',#7155,#7156);+#7155 = CARTESIAN_POINT('',(0.,0.15));+#7156 = VECTOR('',#7157,1.);+#7157 = DIRECTION('',(1.,0.));+#7158 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7159 = PCURVE('',#7160,#7165);+#7160 = PLANE('',#7161);+#7161 = AXIS2_PLACEMENT_3D('',#7162,#7163,#7164);+#7162 = CARTESIAN_POINT('',(2.634182274245,-2.775,0.217942023204));+#7163 = DIRECTION('',(0.,1.,0.));+#7164 = DIRECTION('',(0.,0.,1.));+#7165 = DEFINITIONAL_REPRESENTATION('',(#7166),#7170);+#7166 = LINE('',#7167,#7168);+#7167 = CARTESIAN_POINT('',(0.377057976796,-0.484182274245));+#7168 = VECTOR('',#7169,1.);+#7169 = DIRECTION('',(0.,1.));+#7170 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7171 = ORIENTED_EDGE('',*,*,#7172,.T.);+#7172 = EDGE_CURVE('',#7145,#7082,#7173,.T.);+#7173 = SURFACE_CURVE('',#7174,(#7178,#7185),.PCURVE_S1.);+#7174 = LINE('',#7175,#7176);+#7175 = CARTESIAN_POINT('',(2.15,-2.775,0.595));+#7176 = VECTOR('',#7177,1.);+#7177 = DIRECTION('',(0.,-1.,0.));+#7178 = PCURVE('',#7092,#7179);+#7179 = DEFINITIONAL_REPRESENTATION('',(#7180),#7184);+#7180 = LINE('',#7181,#7182);+#7181 = CARTESIAN_POINT('',(0.,0.15));+#7182 = VECTOR('',#7183,1.);+#7183 = DIRECTION('',(0.,-1.));+#7184 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7185 = PCURVE('',#7186,#7191);+#7186 = PLANE('',#7187);+#7187 = AXIS2_PLACEMENT_3D('',#7188,#7189,#7190);+#7188 = CARTESIAN_POINT('',(2.15,-2.925,0.445));+#7189 = DIRECTION('',(-1.,0.,0.));+#7190 = DIRECTION('',(0.,0.,1.));+#7191 = DEFINITIONAL_REPRESENTATION('',(#7192),#7196);+#7192 = LINE('',#7193,#7194);+#7193 = CARTESIAN_POINT('',(0.15,0.15));+#7194 = VECTOR('',#7195,1.);+#7195 = DIRECTION('',(0.,-1.));+#7196 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7197 = ADVANCED_FACE('',(#7198),#7186,.T.);+#7198 = FACE_BOUND('',#7199,.T.);+#7199 = EDGE_LOOP('',(#7200,#7223,#7224,#7247));+#7200 = ORIENTED_EDGE('',*,*,#7201,.T.);+#7201 = EDGE_CURVE('',#7202,#7082,#7204,.T.);+#7202 = VERTEX_POINT('',#7203);+#7203 = CARTESIAN_POINT('',(2.15,-3.075,0.445));+#7204 = SURFACE_CURVE('',#7205,(#7209,#7216),.PCURVE_S1.);+#7205 = LINE('',#7206,#7207);+#7206 = CARTESIAN_POINT('',(2.15,-3.075,0.445));+#7207 = VECTOR('',#7208,1.);+#7208 = DIRECTION('',(0.,0.,1.));+#7209 = PCURVE('',#7186,#7210);+#7210 = DEFINITIONAL_REPRESENTATION('',(#7211),#7215);+#7211 = LINE('',#7212,#7213);+#7212 = CARTESIAN_POINT('',(0.,-0.15));+#7213 = VECTOR('',#7214,1.);+#7214 = DIRECTION('',(1.,0.));+#7215 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7216 = PCURVE('',#7104,#7217);+#7217 = DEFINITIONAL_REPRESENTATION('',(#7218),#7222);+#7218 = LINE('',#7219,#7220);+#7219 = CARTESIAN_POINT('',(0.227057976796,-0.484182274245));+#7220 = VECTOR('',#7221,1.);+#7221 = DIRECTION('',(1.,0.));+#7222 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7223 = ORIENTED_EDGE('',*,*,#7172,.F.);+#7224 = ORIENTED_EDGE('',*,*,#7225,.F.);+#7225 = EDGE_CURVE('',#7226,#7145,#7228,.T.);+#7226 = VERTEX_POINT('',#7227);+#7227 = CARTESIAN_POINT('',(2.15,-2.775,0.445));+#7228 = SURFACE_CURVE('',#7229,(#7233,#7240),.PCURVE_S1.);+#7229 = LINE('',#7230,#7231);+#7230 = CARTESIAN_POINT('',(2.15,-2.775,0.445));+#7231 = VECTOR('',#7232,1.);+#7232 = DIRECTION('',(0.,0.,1.));+#7233 = PCURVE('',#7186,#7234);+#7234 = DEFINITIONAL_REPRESENTATION('',(#7235),#7239);+#7235 = LINE('',#7236,#7237);+#7236 = CARTESIAN_POINT('',(0.,0.15));+#7237 = VECTOR('',#7238,1.);+#7238 = DIRECTION('',(1.,0.));+#7239 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7240 = PCURVE('',#7160,#7241);+#7241 = DEFINITIONAL_REPRESENTATION('',(#7242),#7246);+#7242 = LINE('',#7243,#7244);+#7243 = CARTESIAN_POINT('',(0.227057976796,-0.484182274245));+#7244 = VECTOR('',#7245,1.);+#7245 = DIRECTION('',(1.,0.));+#7246 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7247 = ORIENTED_EDGE('',*,*,#7248,.T.);+#7248 = EDGE_CURVE('',#7226,#7202,#7249,.T.);+#7249 = SURFACE_CURVE('',#7250,(#7254,#7261),.PCURVE_S1.);+#7250 = LINE('',#7251,#7252);+#7251 = CARTESIAN_POINT('',(2.15,-2.775,0.445));+#7252 = VECTOR('',#7253,1.);+#7253 = DIRECTION('',(0.,-1.,0.));+#7254 = PCURVE('',#7186,#7255);+#7255 = DEFINITIONAL_REPRESENTATION('',(#7256),#7260);+#7256 = LINE('',#7257,#7258);+#7257 = CARTESIAN_POINT('',(0.,0.15));+#7258 = VECTOR('',#7259,1.);+#7259 = DIRECTION('',(0.,-1.));+#7260 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7261 = PCURVE('',#7262,#7267);+#7262 = PLANE('',#7263);+#7263 = AXIS2_PLACEMENT_3D('',#7264,#7265,#7266);+#7264 = CARTESIAN_POINT('',(2.2,-2.925,0.445));+#7265 = DIRECTION('',(-0.,-0.,-1.));+#7266 = DIRECTION('',(-1.,0.,0.));+#7267 = DEFINITIONAL_REPRESENTATION('',(#7268),#7272);+#7268 = LINE('',#7269,#7270);+#7269 = CARTESIAN_POINT('',(5.E-02,0.15));+#7270 = VECTOR('',#7271,1.);+#7271 = DIRECTION('',(0.,-1.));+#7272 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7273 = ADVANCED_FACE('',(#7274),#7262,.T.);+#7274 = FACE_BOUND('',#7275,.T.);+#7275 = EDGE_LOOP('',(#7276,#7299,#7300,#7323));+#7276 = ORIENTED_EDGE('',*,*,#7277,.T.);+#7277 = EDGE_CURVE('',#7278,#7202,#7280,.T.);+#7278 = VERTEX_POINT('',#7279);+#7279 = CARTESIAN_POINT('',(2.2,-3.075,0.445));+#7280 = SURFACE_CURVE('',#7281,(#7285,#7292),.PCURVE_S1.);+#7281 = LINE('',#7282,#7283);+#7282 = CARTESIAN_POINT('',(2.2,-3.075,0.445));+#7283 = VECTOR('',#7284,1.);+#7284 = DIRECTION('',(-1.,0.,0.));+#7285 = PCURVE('',#7262,#7286);+#7286 = DEFINITIONAL_REPRESENTATION('',(#7287),#7291);+#7287 = LINE('',#7288,#7289);+#7288 = CARTESIAN_POINT('',(0.,-0.15));+#7289 = VECTOR('',#7290,1.);+#7290 = DIRECTION('',(1.,0.));+#7291 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7292 = PCURVE('',#7104,#7293);+#7293 = DEFINITIONAL_REPRESENTATION('',(#7294),#7298);+#7294 = LINE('',#7295,#7296);+#7295 = CARTESIAN_POINT('',(0.227057976796,-0.434182274245));+#7296 = VECTOR('',#7297,1.);+#7297 = DIRECTION('',(0.,-1.));+#7298 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7299 = ORIENTED_EDGE('',*,*,#7248,.F.);+#7300 = ORIENTED_EDGE('',*,*,#7301,.F.);+#7301 = EDGE_CURVE('',#7302,#7226,#7304,.T.);+#7302 = VERTEX_POINT('',#7303);+#7303 = CARTESIAN_POINT('',(2.2,-2.775,0.445));+#7304 = SURFACE_CURVE('',#7305,(#7309,#7316),.PCURVE_S1.);+#7305 = LINE('',#7306,#7307);+#7306 = CARTESIAN_POINT('',(2.2,-2.775,0.445));+#7307 = VECTOR('',#7308,1.);+#7308 = DIRECTION('',(-1.,0.,0.));+#7309 = PCURVE('',#7262,#7310);+#7310 = DEFINITIONAL_REPRESENTATION('',(#7311),#7315);+#7311 = LINE('',#7312,#7313);+#7312 = CARTESIAN_POINT('',(0.,0.15));+#7313 = VECTOR('',#7314,1.);+#7314 = DIRECTION('',(1.,0.));+#7315 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7316 = PCURVE('',#7160,#7317);+#7317 = DEFINITIONAL_REPRESENTATION('',(#7318),#7322);+#7318 = LINE('',#7319,#7320);+#7319 = CARTESIAN_POINT('',(0.227057976796,-0.434182274245));+#7320 = VECTOR('',#7321,1.);+#7321 = DIRECTION('',(0.,-1.));+#7322 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7323 = ORIENTED_EDGE('',*,*,#7324,.T.);+#7324 = EDGE_CURVE('',#7302,#7278,#7325,.T.);+#7325 = SURFACE_CURVE('',#7326,(#7330,#7337),.PCURVE_S1.);+#7326 = LINE('',#7327,#7328);+#7327 = CARTESIAN_POINT('',(2.2,-2.775,0.445));+#7328 = VECTOR('',#7329,1.);+#7329 = DIRECTION('',(0.,-1.,0.));+#7330 = PCURVE('',#7262,#7331);+#7331 = DEFINITIONAL_REPRESENTATION('',(#7332),#7336);+#7332 = LINE('',#7333,#7334);+#7333 = CARTESIAN_POINT('',(0.,0.15));+#7334 = VECTOR('',#7335,1.);+#7335 = DIRECTION('',(0.,-1.));+#7336 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7337 = PCURVE('',#7338,#7343);+#7338 = PLANE('',#7339);+#7339 = AXIS2_PLACEMENT_3D('',#7340,#7341,#7342);+#7340 = CARTESIAN_POINT('',(2.4875,-2.925,0.));+#7341 = DIRECTION('',(-0.839949759337,-0.,-0.542664170358));+#7342 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#7343 = DEFINITIONAL_REPRESENTATION('',(#7344),#7348);+#7344 = LINE('',#7345,#7346);+#7345 = CARTESIAN_POINT('',(0.529793591883,0.15));+#7346 = VECTOR('',#7347,1.);+#7347 = DIRECTION('',(0.,-1.));+#7348 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7349 = ADVANCED_FACE('',(#7350),#7338,.T.);+#7350 = FACE_BOUND('',#7351,.T.);+#7351 = EDGE_LOOP('',(#7352,#7382,#7403,#7404));+#7352 = ORIENTED_EDGE('',*,*,#7353,.F.);+#7353 = EDGE_CURVE('',#7354,#7356,#7358,.T.);+#7354 = VERTEX_POINT('',#7355);+#7355 = CARTESIAN_POINT('',(2.4875,-3.075,0.));+#7356 = VERTEX_POINT('',#7357);+#7357 = CARTESIAN_POINT('',(2.4875,-2.775,0.));+#7358 = SURFACE_CURVE('',#7359,(#7363,#7370),.PCURVE_S1.);+#7359 = LINE('',#7360,#7361);+#7360 = CARTESIAN_POINT('',(2.4875,-3.075,0.));+#7361 = VECTOR('',#7362,1.);+#7362 = DIRECTION('',(0.,1.,0.));+#7363 = PCURVE('',#7338,#7364);+#7364 = DEFINITIONAL_REPRESENTATION('',(#7365),#7369);+#7365 = LINE('',#7366,#7367);+#7366 = CARTESIAN_POINT('',(0.,-0.15));+#7367 = VECTOR('',#7368,1.);+#7368 = DIRECTION('',(0.,1.));+#7369 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7370 = PCURVE('',#7371,#7376);+#7371 = PLANE('',#7372);+#7372 = AXIS2_PLACEMENT_3D('',#7373,#7374,#7375);+#7373 = CARTESIAN_POINT('',(3.205,-2.925,0.));+#7374 = DIRECTION('',(-0.,-0.,-1.));+#7375 = DIRECTION('',(-1.,0.,0.));+#7376 = DEFINITIONAL_REPRESENTATION('',(#7377),#7381);+#7377 = LINE('',#7378,#7379);+#7378 = CARTESIAN_POINT('',(0.7175,-0.15));+#7379 = VECTOR('',#7380,1.);+#7380 = DIRECTION('',(0.,1.));+#7381 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7382 = ORIENTED_EDGE('',*,*,#7383,.T.);+#7383 = EDGE_CURVE('',#7354,#7278,#7384,.T.);+#7384 = SURFACE_CURVE('',#7385,(#7389,#7396),.PCURVE_S1.);+#7385 = LINE('',#7386,#7387);+#7386 = CARTESIAN_POINT('',(2.4875,-3.075,0.));+#7387 = VECTOR('',#7388,1.);+#7388 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#7389 = PCURVE('',#7338,#7390);+#7390 = DEFINITIONAL_REPRESENTATION('',(#7391),#7395);+#7391 = LINE('',#7392,#7393);+#7392 = CARTESIAN_POINT('',(0.,-0.15));+#7393 = VECTOR('',#7394,1.);+#7394 = DIRECTION('',(1.,0.));+#7395 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7396 = PCURVE('',#7104,#7397);+#7397 = DEFINITIONAL_REPRESENTATION('',(#7398),#7402);+#7398 = LINE('',#7399,#7400);+#7399 = CARTESIAN_POINT('',(-0.217942023204,-0.146682274245));+#7400 = VECTOR('',#7401,1.);+#7401 = DIRECTION('',(0.839949759337,-0.542664170358));+#7402 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7403 = ORIENTED_EDGE('',*,*,#7324,.F.);+#7404 = ORIENTED_EDGE('',*,*,#7405,.F.);+#7405 = EDGE_CURVE('',#7356,#7302,#7406,.T.);+#7406 = SURFACE_CURVE('',#7407,(#7411,#7418),.PCURVE_S1.);+#7407 = LINE('',#7408,#7409);+#7408 = CARTESIAN_POINT('',(2.4875,-2.775,0.));+#7409 = VECTOR('',#7410,1.);+#7410 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#7411 = PCURVE('',#7338,#7412);+#7412 = DEFINITIONAL_REPRESENTATION('',(#7413),#7417);+#7413 = LINE('',#7414,#7415);+#7414 = CARTESIAN_POINT('',(0.,0.15));+#7415 = VECTOR('',#7416,1.);+#7416 = DIRECTION('',(1.,0.));+#7417 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7418 = PCURVE('',#7160,#7419);+#7419 = DEFINITIONAL_REPRESENTATION('',(#7420),#7424);+#7420 = LINE('',#7421,#7422);+#7421 = CARTESIAN_POINT('',(-0.217942023204,-0.146682274245));+#7422 = VECTOR('',#7423,1.);+#7423 = DIRECTION('',(0.839949759337,-0.542664170358));+#7424 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7425 = ADVANCED_FACE('',(#7426),#7371,.T.);+#7426 = FACE_BOUND('',#7427,.T.);+#7427 = EDGE_LOOP('',(#7428,#7458,#7479,#7480));+#7428 = ORIENTED_EDGE('',*,*,#7429,.F.);+#7429 = EDGE_CURVE('',#7430,#7432,#7434,.T.);+#7430 = VERTEX_POINT('',#7431);+#7431 = CARTESIAN_POINT('',(3.205,-3.075,0.));+#7432 = VERTEX_POINT('',#7433);+#7433 = CARTESIAN_POINT('',(3.205,-2.775,0.));+#7434 = SURFACE_CURVE('',#7435,(#7439,#7446),.PCURVE_S1.);+#7435 = LINE('',#7436,#7437);+#7436 = CARTESIAN_POINT('',(3.205,-3.075,0.));+#7437 = VECTOR('',#7438,1.);+#7438 = DIRECTION('',(0.,1.,0.));+#7439 = PCURVE('',#7371,#7440);+#7440 = DEFINITIONAL_REPRESENTATION('',(#7441),#7445);+#7441 = LINE('',#7442,#7443);+#7442 = CARTESIAN_POINT('',(0.,-0.15));+#7443 = VECTOR('',#7444,1.);+#7444 = DIRECTION('',(0.,1.));+#7445 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7446 = PCURVE('',#7447,#7452);+#7447 = PLANE('',#7448);+#7448 = AXIS2_PLACEMENT_3D('',#7449,#7450,#7451);+#7449 = CARTESIAN_POINT('',(3.205,-2.925,0.15));+#7450 = DIRECTION('',(1.,0.,0.));+#7451 = DIRECTION('',(0.,0.,-1.));+#7452 = DEFINITIONAL_REPRESENTATION('',(#7453),#7457);+#7453 = LINE('',#7454,#7455);+#7454 = CARTESIAN_POINT('',(0.15,-0.15));+#7455 = VECTOR('',#7456,1.);+#7456 = DIRECTION('',(0.,1.));+#7457 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7458 = ORIENTED_EDGE('',*,*,#7459,.T.);+#7459 = EDGE_CURVE('',#7430,#7354,#7460,.T.);+#7460 = SURFACE_CURVE('',#7461,(#7465,#7472),.PCURVE_S1.);+#7461 = LINE('',#7462,#7463);+#7462 = CARTESIAN_POINT('',(3.205,-3.075,0.));+#7463 = VECTOR('',#7464,1.);+#7464 = DIRECTION('',(-1.,0.,0.));+#7465 = PCURVE('',#7371,#7466);+#7466 = DEFINITIONAL_REPRESENTATION('',(#7467),#7471);+#7467 = LINE('',#7468,#7469);+#7468 = CARTESIAN_POINT('',(0.,-0.15));+#7469 = VECTOR('',#7470,1.);+#7470 = DIRECTION('',(1.,0.));+#7471 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7472 = PCURVE('',#7104,#7473);+#7473 = DEFINITIONAL_REPRESENTATION('',(#7474),#7478);+#7474 = LINE('',#7475,#7476);+#7475 = CARTESIAN_POINT('',(-0.217942023204,0.570817725755));+#7476 = VECTOR('',#7477,1.);+#7477 = DIRECTION('',(0.,-1.));+#7478 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7479 = ORIENTED_EDGE('',*,*,#7353,.T.);+#7480 = ORIENTED_EDGE('',*,*,#7481,.F.);+#7481 = EDGE_CURVE('',#7432,#7356,#7482,.T.);+#7482 = SURFACE_CURVE('',#7483,(#7487,#7494),.PCURVE_S1.);+#7483 = LINE('',#7484,#7485);+#7484 = CARTESIAN_POINT('',(3.205,-2.775,0.));+#7485 = VECTOR('',#7486,1.);+#7486 = DIRECTION('',(-1.,0.,0.));+#7487 = PCURVE('',#7371,#7488);+#7488 = DEFINITIONAL_REPRESENTATION('',(#7489),#7493);+#7489 = LINE('',#7490,#7491);+#7490 = CARTESIAN_POINT('',(0.,0.15));+#7491 = VECTOR('',#7492,1.);+#7492 = DIRECTION('',(1.,0.));+#7493 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7494 = PCURVE('',#7160,#7495);+#7495 = DEFINITIONAL_REPRESENTATION('',(#7496),#7500);+#7496 = LINE('',#7497,#7498);+#7497 = CARTESIAN_POINT('',(-0.217942023204,0.570817725755));+#7498 = VECTOR('',#7499,1.);+#7499 = DIRECTION('',(0.,-1.));+#7500 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7501 = ADVANCED_FACE('',(#7502),#7447,.T.);+#7502 = FACE_BOUND('',#7503,.T.);+#7503 = EDGE_LOOP('',(#7504,#7534,#7555,#7556));+#7504 = ORIENTED_EDGE('',*,*,#7505,.F.);+#7505 = EDGE_CURVE('',#7506,#7508,#7510,.T.);+#7506 = VERTEX_POINT('',#7507);+#7507 = CARTESIAN_POINT('',(3.205,-3.075,0.15));+#7508 = VERTEX_POINT('',#7509);+#7509 = CARTESIAN_POINT('',(3.205,-2.775,0.15));+#7510 = SURFACE_CURVE('',#7511,(#7515,#7522),.PCURVE_S1.);+#7511 = LINE('',#7512,#7513);+#7512 = CARTESIAN_POINT('',(3.205,-3.075,0.15));+#7513 = VECTOR('',#7514,1.);+#7514 = DIRECTION('',(0.,1.,0.));+#7515 = PCURVE('',#7447,#7516);+#7516 = DEFINITIONAL_REPRESENTATION('',(#7517),#7521);+#7517 = LINE('',#7518,#7519);+#7518 = CARTESIAN_POINT('',(0.,-0.15));+#7519 = VECTOR('',#7520,1.);+#7520 = DIRECTION('',(0.,1.));+#7521 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7522 = PCURVE('',#7523,#7528);+#7523 = PLANE('',#7524);+#7524 = AXIS2_PLACEMENT_3D('',#7525,#7526,#7527);+#7525 = CARTESIAN_POINT('',(2.6375,-2.925,0.15));+#7526 = DIRECTION('',(0.,0.,1.));+#7527 = DIRECTION('',(1.,0.,0.));+#7528 = DEFINITIONAL_REPRESENTATION('',(#7529),#7533);+#7529 = LINE('',#7530,#7531);+#7530 = CARTESIAN_POINT('',(0.5675,-0.15));+#7531 = VECTOR('',#7532,1.);+#7532 = DIRECTION('',(0.,1.));+#7533 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7534 = ORIENTED_EDGE('',*,*,#7535,.T.);+#7535 = EDGE_CURVE('',#7506,#7430,#7536,.T.);+#7536 = SURFACE_CURVE('',#7537,(#7541,#7548),.PCURVE_S1.);+#7537 = LINE('',#7538,#7539);+#7538 = CARTESIAN_POINT('',(3.205,-3.075,0.15));+#7539 = VECTOR('',#7540,1.);+#7540 = DIRECTION('',(0.,0.,-1.));+#7541 = PCURVE('',#7447,#7542);+#7542 = DEFINITIONAL_REPRESENTATION('',(#7543),#7547);+#7543 = LINE('',#7544,#7545);+#7544 = CARTESIAN_POINT('',(0.,-0.15));+#7545 = VECTOR('',#7546,1.);+#7546 = DIRECTION('',(1.,0.));+#7547 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7548 = PCURVE('',#7104,#7549);+#7549 = DEFINITIONAL_REPRESENTATION('',(#7550),#7554);+#7550 = LINE('',#7551,#7552);+#7551 = CARTESIAN_POINT('',(-6.7942023204E-02,0.570817725755));+#7552 = VECTOR('',#7553,1.);+#7553 = DIRECTION('',(-1.,0.));+#7554 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7555 = ORIENTED_EDGE('',*,*,#7429,.T.);+#7556 = ORIENTED_EDGE('',*,*,#7557,.F.);+#7557 = EDGE_CURVE('',#7508,#7432,#7558,.T.);+#7558 = SURFACE_CURVE('',#7559,(#7563,#7570),.PCURVE_S1.);+#7559 = LINE('',#7560,#7561);+#7560 = CARTESIAN_POINT('',(3.205,-2.775,0.15));+#7561 = VECTOR('',#7562,1.);+#7562 = DIRECTION('',(0.,0.,-1.));+#7563 = PCURVE('',#7447,#7564);+#7564 = DEFINITIONAL_REPRESENTATION('',(#7565),#7569);+#7565 = LINE('',#7566,#7567);+#7566 = CARTESIAN_POINT('',(0.,0.15));+#7567 = VECTOR('',#7568,1.);+#7568 = DIRECTION('',(1.,0.));+#7569 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7570 = PCURVE('',#7160,#7571);+#7571 = DEFINITIONAL_REPRESENTATION('',(#7572),#7576);+#7572 = LINE('',#7573,#7574);+#7573 = CARTESIAN_POINT('',(-6.7942023204E-02,0.570817725755));+#7574 = VECTOR('',#7575,1.);+#7575 = DIRECTION('',(-1.,0.));+#7576 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7577 = ADVANCED_FACE('',(#7578),#7523,.T.);+#7578 = FACE_BOUND('',#7579,.T.);+#7579 = EDGE_LOOP('',(#7580,#7605,#7626,#7627));+#7580 = ORIENTED_EDGE('',*,*,#7581,.F.);+#7581 = EDGE_CURVE('',#7582,#7584,#7586,.T.);+#7582 = VERTEX_POINT('',#7583);+#7583 = CARTESIAN_POINT('',(2.6375,-3.075,0.15));+#7584 = VERTEX_POINT('',#7585);+#7585 = CARTESIAN_POINT('',(2.6375,-2.775,0.15));+#7586 = SURFACE_CURVE('',#7587,(#7591,#7598),.PCURVE_S1.);+#7587 = LINE('',#7588,#7589);+#7588 = CARTESIAN_POINT('',(2.6375,-3.075,0.15));+#7589 = VECTOR('',#7590,1.);+#7590 = DIRECTION('',(0.,1.,0.));+#7591 = PCURVE('',#7523,#7592);+#7592 = DEFINITIONAL_REPRESENTATION('',(#7593),#7597);+#7593 = LINE('',#7594,#7595);+#7594 = CARTESIAN_POINT('',(0.,-0.15));+#7595 = VECTOR('',#7596,1.);+#7596 = DIRECTION('',(0.,1.));+#7597 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7598 = PCURVE('',#7132,#7599);+#7599 = DEFINITIONAL_REPRESENTATION('',(#7600),#7604);+#7600 = LINE('',#7601,#7602);+#7601 = CARTESIAN_POINT('',(0.529793591883,-0.15));+#7602 = VECTOR('',#7603,1.);+#7603 = DIRECTION('',(0.,1.));+#7604 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7605 = ORIENTED_EDGE('',*,*,#7606,.T.);+#7606 = EDGE_CURVE('',#7582,#7506,#7607,.T.);+#7607 = SURFACE_CURVE('',#7608,(#7612,#7619),.PCURVE_S1.);+#7608 = LINE('',#7609,#7610);+#7609 = CARTESIAN_POINT('',(2.6375,-3.075,0.15));+#7610 = VECTOR('',#7611,1.);+#7611 = DIRECTION('',(1.,0.,0.));+#7612 = PCURVE('',#7523,#7613);+#7613 = DEFINITIONAL_REPRESENTATION('',(#7614),#7618);+#7614 = LINE('',#7615,#7616);+#7615 = CARTESIAN_POINT('',(0.,-0.15));+#7616 = VECTOR('',#7617,1.);+#7617 = DIRECTION('',(1.,0.));+#7618 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7619 = PCURVE('',#7104,#7620);+#7620 = DEFINITIONAL_REPRESENTATION('',(#7621),#7625);+#7621 = LINE('',#7622,#7623);+#7622 = CARTESIAN_POINT('',(-6.7942023204E-02,3.317725755E-03));+#7623 = VECTOR('',#7624,1.);+#7624 = DIRECTION('',(0.,1.));+#7625 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7626 = ORIENTED_EDGE('',*,*,#7505,.T.);+#7627 = ORIENTED_EDGE('',*,*,#7628,.F.);+#7628 = EDGE_CURVE('',#7584,#7508,#7629,.T.);+#7629 = SURFACE_CURVE('',#7630,(#7634,#7641),.PCURVE_S1.);+#7630 = LINE('',#7631,#7632);+#7631 = CARTESIAN_POINT('',(2.6375,-2.775,0.15));+#7632 = VECTOR('',#7633,1.);+#7633 = DIRECTION('',(1.,0.,0.));+#7634 = PCURVE('',#7523,#7635);+#7635 = DEFINITIONAL_REPRESENTATION('',(#7636),#7640);+#7636 = LINE('',#7637,#7638);+#7637 = CARTESIAN_POINT('',(0.,0.15));+#7638 = VECTOR('',#7639,1.);+#7639 = DIRECTION('',(1.,0.));+#7640 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7641 = PCURVE('',#7160,#7642);+#7642 = DEFINITIONAL_REPRESENTATION('',(#7643),#7647);+#7643 = LINE('',#7644,#7645);+#7644 = CARTESIAN_POINT('',(-6.7942023204E-02,3.317725755E-03));+#7645 = VECTOR('',#7646,1.);+#7646 = DIRECTION('',(0.,1.));+#7647 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7648 = ADVANCED_FACE('',(#7649),#7160,.T.);+#7649 = FACE_BOUND('',#7650,.T.);+#7650 = EDGE_LOOP('',(#7651,#7652,#7673,#7674,#7675,#7676,#7677,#7678));+#7651 = ORIENTED_EDGE('',*,*,#7144,.T.);+#7652 = ORIENTED_EDGE('',*,*,#7653,.T.);+#7653 = EDGE_CURVE('',#7117,#7584,#7654,.T.);+#7654 = SURFACE_CURVE('',#7655,(#7659,#7666),.PCURVE_S1.);+#7655 = LINE('',#7656,#7657);+#7656 = CARTESIAN_POINT('',(2.35,-2.775,0.595));+#7657 = VECTOR('',#7658,1.);+#7658 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#7659 = PCURVE('',#7160,#7660);+#7660 = DEFINITIONAL_REPRESENTATION('',(#7661),#7665);+#7661 = LINE('',#7662,#7663);+#7662 = CARTESIAN_POINT('',(0.377057976796,-0.284182274245));+#7663 = VECTOR('',#7664,1.);+#7664 = DIRECTION('',(-0.839949759337,0.542664170358));+#7665 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7666 = PCURVE('',#7132,#7667);+#7667 = DEFINITIONAL_REPRESENTATION('',(#7668),#7672);+#7668 = LINE('',#7669,#7670);+#7669 = CARTESIAN_POINT('',(0.,0.15));+#7670 = VECTOR('',#7671,1.);+#7671 = DIRECTION('',(1.,0.));+#7672 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7673 = ORIENTED_EDGE('',*,*,#7628,.T.);+#7674 = ORIENTED_EDGE('',*,*,#7557,.T.);+#7675 = ORIENTED_EDGE('',*,*,#7481,.T.);+#7676 = ORIENTED_EDGE('',*,*,#7405,.T.);+#7677 = ORIENTED_EDGE('',*,*,#7301,.T.);+#7678 = ORIENTED_EDGE('',*,*,#7225,.T.);+#7679 = ADVANCED_FACE('',(#7680),#7132,.T.);+#7680 = FACE_BOUND('',#7681,.T.);+#7681 = EDGE_LOOP('',(#7682,#7683,#7704,#7705));+#7682 = ORIENTED_EDGE('',*,*,#7116,.F.);+#7683 = ORIENTED_EDGE('',*,*,#7684,.T.);+#7684 = EDGE_CURVE('',#7084,#7582,#7685,.T.);+#7685 = SURFACE_CURVE('',#7686,(#7690,#7697),.PCURVE_S1.);+#7686 = LINE('',#7687,#7688);+#7687 = CARTESIAN_POINT('',(2.35,-3.075,0.595));+#7688 = VECTOR('',#7689,1.);+#7689 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#7690 = PCURVE('',#7132,#7691);+#7691 = DEFINITIONAL_REPRESENTATION('',(#7692),#7696);+#7692 = LINE('',#7693,#7694);+#7693 = CARTESIAN_POINT('',(0.,-0.15));+#7694 = VECTOR('',#7695,1.);+#7695 = DIRECTION('',(1.,0.));+#7696 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7697 = PCURVE('',#7104,#7698);+#7698 = DEFINITIONAL_REPRESENTATION('',(#7699),#7703);+#7699 = LINE('',#7700,#7701);+#7700 = CARTESIAN_POINT('',(0.377057976796,-0.284182274245));+#7701 = VECTOR('',#7702,1.);+#7702 = DIRECTION('',(-0.839949759337,0.542664170358));+#7703 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7704 = ORIENTED_EDGE('',*,*,#7581,.T.);+#7705 = ORIENTED_EDGE('',*,*,#7653,.F.);+#7706 = ADVANCED_FACE('',(#7707),#7104,.F.);+#7707 = FACE_BOUND('',#7708,.F.);+#7708 = EDGE_LOOP('',(#7709,#7710,#7711,#7712,#7713,#7714,#7715,#7716));+#7709 = ORIENTED_EDGE('',*,*,#7081,.T.);+#7710 = ORIENTED_EDGE('',*,*,#7684,.T.);+#7711 = ORIENTED_EDGE('',*,*,#7606,.T.);+#7712 = ORIENTED_EDGE('',*,*,#7535,.T.);+#7713 = ORIENTED_EDGE('',*,*,#7459,.T.);+#7714 = ORIENTED_EDGE('',*,*,#7383,.T.);+#7715 = ORIENTED_EDGE('',*,*,#7277,.T.);+#7716 = ORIENTED_EDGE('',*,*,#7201,.T.);+#7717 = MANIFOLD_SOLID_BREP('',#7718);+#7718 = CLOSED_SHELL('',(#7719,#7839,#7915,#7991,#8067,#8143,#8219,#8290+ ,#8321,#8348));+#7719 = ADVANCED_FACE('',(#7720),#7734,.T.);+#7720 = FACE_BOUND('',#7721,.T.);+#7721 = EDGE_LOOP('',(#7722,#7757,#7785,#7813));+#7722 = ORIENTED_EDGE('',*,*,#7723,.T.);+#7723 = EDGE_CURVE('',#7724,#7726,#7728,.T.);+#7724 = VERTEX_POINT('',#7725);+#7725 = CARTESIAN_POINT('',(2.15,-2.425,0.595));+#7726 = VERTEX_POINT('',#7727);+#7727 = CARTESIAN_POINT('',(2.35,-2.425,0.595));+#7728 = SURFACE_CURVE('',#7729,(#7733,#7745),.PCURVE_S1.);+#7729 = LINE('',#7730,#7731);+#7730 = CARTESIAN_POINT('',(2.15,-2.425,0.595));+#7731 = VECTOR('',#7732,1.);+#7732 = DIRECTION('',(1.,0.,0.));+#7733 = PCURVE('',#7734,#7739);+#7734 = PLANE('',#7735);+#7735 = AXIS2_PLACEMENT_3D('',#7736,#7737,#7738);+#7736 = CARTESIAN_POINT('',(2.15,-2.275,0.595));+#7737 = DIRECTION('',(0.,0.,1.));+#7738 = DIRECTION('',(1.,0.,0.));+#7739 = DEFINITIONAL_REPRESENTATION('',(#7740),#7744);+#7740 = LINE('',#7741,#7742);+#7741 = CARTESIAN_POINT('',(0.,-0.15));+#7742 = VECTOR('',#7743,1.);+#7743 = DIRECTION('',(1.,0.));+#7744 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7745 = PCURVE('',#7746,#7751);+#7746 = PLANE('',#7747);+#7747 = AXIS2_PLACEMENT_3D('',#7748,#7749,#7750);+#7748 = CARTESIAN_POINT('',(2.634182274245,-2.425,0.217942023204));+#7749 = DIRECTION('',(0.,1.,0.));+#7750 = DIRECTION('',(0.,0.,1.));+#7751 = DEFINITIONAL_REPRESENTATION('',(#7752),#7756);+#7752 = LINE('',#7753,#7754);+#7753 = CARTESIAN_POINT('',(0.377057976796,-0.484182274245));+#7754 = VECTOR('',#7755,1.);+#7755 = DIRECTION('',(0.,1.));+#7756 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7757 = ORIENTED_EDGE('',*,*,#7758,.T.);+#7758 = EDGE_CURVE('',#7726,#7759,#7761,.T.);+#7759 = VERTEX_POINT('',#7760);+#7760 = CARTESIAN_POINT('',(2.35,-2.125,0.595));+#7761 = SURFACE_CURVE('',#7762,(#7766,#7773),.PCURVE_S1.);+#7762 = LINE('',#7763,#7764);+#7763 = CARTESIAN_POINT('',(2.35,-2.425,0.595));+#7764 = VECTOR('',#7765,1.);+#7765 = DIRECTION('',(0.,1.,0.));+#7766 = PCURVE('',#7734,#7767);+#7767 = DEFINITIONAL_REPRESENTATION('',(#7768),#7772);+#7768 = LINE('',#7769,#7770);+#7769 = CARTESIAN_POINT('',(0.2,-0.15));+#7770 = VECTOR('',#7771,1.);+#7771 = DIRECTION('',(0.,1.));+#7772 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7773 = PCURVE('',#7774,#7779);+#7774 = PLANE('',#7775);+#7775 = AXIS2_PLACEMENT_3D('',#7776,#7777,#7778);+#7776 = CARTESIAN_POINT('',(2.35,-2.275,0.595));+#7777 = DIRECTION('',(0.839949759337,0.,0.542664170358));+#7778 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#7779 = DEFINITIONAL_REPRESENTATION('',(#7780),#7784);+#7780 = LINE('',#7781,#7782);+#7781 = CARTESIAN_POINT('',(0.,-0.15));+#7782 = VECTOR('',#7783,1.);+#7783 = DIRECTION('',(0.,1.));+#7784 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7785 = ORIENTED_EDGE('',*,*,#7786,.F.);+#7786 = EDGE_CURVE('',#7787,#7759,#7789,.T.);+#7787 = VERTEX_POINT('',#7788);+#7788 = CARTESIAN_POINT('',(2.15,-2.125,0.595));+#7789 = SURFACE_CURVE('',#7790,(#7794,#7801),.PCURVE_S1.);+#7790 = LINE('',#7791,#7792);+#7791 = CARTESIAN_POINT('',(2.15,-2.125,0.595));+#7792 = VECTOR('',#7793,1.);+#7793 = DIRECTION('',(1.,0.,0.));+#7794 = PCURVE('',#7734,#7795);+#7795 = DEFINITIONAL_REPRESENTATION('',(#7796),#7800);+#7796 = LINE('',#7797,#7798);+#7797 = CARTESIAN_POINT('',(0.,0.15));+#7798 = VECTOR('',#7799,1.);+#7799 = DIRECTION('',(1.,0.));+#7800 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7801 = PCURVE('',#7802,#7807);+#7802 = PLANE('',#7803);+#7803 = AXIS2_PLACEMENT_3D('',#7804,#7805,#7806);+#7804 = CARTESIAN_POINT('',(2.634182274245,-2.125,0.217942023204));+#7805 = DIRECTION('',(0.,1.,0.));+#7806 = DIRECTION('',(0.,0.,1.));+#7807 = DEFINITIONAL_REPRESENTATION('',(#7808),#7812);+#7808 = LINE('',#7809,#7810);+#7809 = CARTESIAN_POINT('',(0.377057976796,-0.484182274245));+#7810 = VECTOR('',#7811,1.);+#7811 = DIRECTION('',(0.,1.));+#7812 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7813 = ORIENTED_EDGE('',*,*,#7814,.T.);+#7814 = EDGE_CURVE('',#7787,#7724,#7815,.T.);+#7815 = SURFACE_CURVE('',#7816,(#7820,#7827),.PCURVE_S1.);+#7816 = LINE('',#7817,#7818);+#7817 = CARTESIAN_POINT('',(2.15,-2.125,0.595));+#7818 = VECTOR('',#7819,1.);+#7819 = DIRECTION('',(0.,-1.,0.));+#7820 = PCURVE('',#7734,#7821);+#7821 = DEFINITIONAL_REPRESENTATION('',(#7822),#7826);+#7822 = LINE('',#7823,#7824);+#7823 = CARTESIAN_POINT('',(0.,0.15));+#7824 = VECTOR('',#7825,1.);+#7825 = DIRECTION('',(0.,-1.));+#7826 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7827 = PCURVE('',#7828,#7833);+#7828 = PLANE('',#7829);+#7829 = AXIS2_PLACEMENT_3D('',#7830,#7831,#7832);+#7830 = CARTESIAN_POINT('',(2.15,-2.275,0.445));+#7831 = DIRECTION('',(-1.,0.,0.));+#7832 = DIRECTION('',(0.,0.,1.));+#7833 = DEFINITIONAL_REPRESENTATION('',(#7834),#7838);+#7834 = LINE('',#7835,#7836);+#7835 = CARTESIAN_POINT('',(0.15,0.15));+#7836 = VECTOR('',#7837,1.);+#7837 = DIRECTION('',(0.,-1.));+#7838 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7839 = ADVANCED_FACE('',(#7840),#7828,.T.);+#7840 = FACE_BOUND('',#7841,.T.);+#7841 = EDGE_LOOP('',(#7842,#7865,#7866,#7889));+#7842 = ORIENTED_EDGE('',*,*,#7843,.T.);+#7843 = EDGE_CURVE('',#7844,#7724,#7846,.T.);+#7844 = VERTEX_POINT('',#7845);+#7845 = CARTESIAN_POINT('',(2.15,-2.425,0.445));+#7846 = SURFACE_CURVE('',#7847,(#7851,#7858),.PCURVE_S1.);+#7847 = LINE('',#7848,#7849);+#7848 = CARTESIAN_POINT('',(2.15,-2.425,0.445));+#7849 = VECTOR('',#7850,1.);+#7850 = DIRECTION('',(0.,0.,1.));+#7851 = PCURVE('',#7828,#7852);+#7852 = DEFINITIONAL_REPRESENTATION('',(#7853),#7857);+#7853 = LINE('',#7854,#7855);+#7854 = CARTESIAN_POINT('',(0.,-0.15));+#7855 = VECTOR('',#7856,1.);+#7856 = DIRECTION('',(1.,0.));+#7857 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7858 = PCURVE('',#7746,#7859);+#7859 = DEFINITIONAL_REPRESENTATION('',(#7860),#7864);+#7860 = LINE('',#7861,#7862);+#7861 = CARTESIAN_POINT('',(0.227057976796,-0.484182274245));+#7862 = VECTOR('',#7863,1.);+#7863 = DIRECTION('',(1.,0.));+#7864 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7865 = ORIENTED_EDGE('',*,*,#7814,.F.);+#7866 = ORIENTED_EDGE('',*,*,#7867,.F.);+#7867 = EDGE_CURVE('',#7868,#7787,#7870,.T.);+#7868 = VERTEX_POINT('',#7869);+#7869 = CARTESIAN_POINT('',(2.15,-2.125,0.445));+#7870 = SURFACE_CURVE('',#7871,(#7875,#7882),.PCURVE_S1.);+#7871 = LINE('',#7872,#7873);+#7872 = CARTESIAN_POINT('',(2.15,-2.125,0.445));+#7873 = VECTOR('',#7874,1.);+#7874 = DIRECTION('',(0.,0.,1.));+#7875 = PCURVE('',#7828,#7876);+#7876 = DEFINITIONAL_REPRESENTATION('',(#7877),#7881);+#7877 = LINE('',#7878,#7879);+#7878 = CARTESIAN_POINT('',(0.,0.15));+#7879 = VECTOR('',#7880,1.);+#7880 = DIRECTION('',(1.,0.));+#7881 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7882 = PCURVE('',#7802,#7883);+#7883 = DEFINITIONAL_REPRESENTATION('',(#7884),#7888);+#7884 = LINE('',#7885,#7886);+#7885 = CARTESIAN_POINT('',(0.227057976796,-0.484182274245));+#7886 = VECTOR('',#7887,1.);+#7887 = DIRECTION('',(1.,0.));+#7888 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7889 = ORIENTED_EDGE('',*,*,#7890,.T.);+#7890 = EDGE_CURVE('',#7868,#7844,#7891,.T.);+#7891 = SURFACE_CURVE('',#7892,(#7896,#7903),.PCURVE_S1.);+#7892 = LINE('',#7893,#7894);+#7893 = CARTESIAN_POINT('',(2.15,-2.125,0.445));+#7894 = VECTOR('',#7895,1.);+#7895 = DIRECTION('',(0.,-1.,0.));+#7896 = PCURVE('',#7828,#7897);+#7897 = DEFINITIONAL_REPRESENTATION('',(#7898),#7902);+#7898 = LINE('',#7899,#7900);+#7899 = CARTESIAN_POINT('',(0.,0.15));+#7900 = VECTOR('',#7901,1.);+#7901 = DIRECTION('',(0.,-1.));+#7902 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7903 = PCURVE('',#7904,#7909);+#7904 = PLANE('',#7905);+#7905 = AXIS2_PLACEMENT_3D('',#7906,#7907,#7908);+#7906 = CARTESIAN_POINT('',(2.2,-2.275,0.445));+#7907 = DIRECTION('',(-0.,-0.,-1.));+#7908 = DIRECTION('',(-1.,0.,0.));+#7909 = DEFINITIONAL_REPRESENTATION('',(#7910),#7914);+#7910 = LINE('',#7911,#7912);+#7911 = CARTESIAN_POINT('',(5.E-02,0.15));+#7912 = VECTOR('',#7913,1.);+#7913 = DIRECTION('',(0.,-1.));+#7914 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7915 = ADVANCED_FACE('',(#7916),#7904,.T.);+#7916 = FACE_BOUND('',#7917,.T.);+#7917 = EDGE_LOOP('',(#7918,#7941,#7942,#7965));+#7918 = ORIENTED_EDGE('',*,*,#7919,.T.);+#7919 = EDGE_CURVE('',#7920,#7844,#7922,.T.);+#7920 = VERTEX_POINT('',#7921);+#7921 = CARTESIAN_POINT('',(2.2,-2.425,0.445));+#7922 = SURFACE_CURVE('',#7923,(#7927,#7934),.PCURVE_S1.);+#7923 = LINE('',#7924,#7925);+#7924 = CARTESIAN_POINT('',(2.2,-2.425,0.445));+#7925 = VECTOR('',#7926,1.);+#7926 = DIRECTION('',(-1.,0.,0.));+#7927 = PCURVE('',#7904,#7928);+#7928 = DEFINITIONAL_REPRESENTATION('',(#7929),#7933);+#7929 = LINE('',#7930,#7931);+#7930 = CARTESIAN_POINT('',(0.,-0.15));+#7931 = VECTOR('',#7932,1.);+#7932 = DIRECTION('',(1.,0.));+#7933 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7934 = PCURVE('',#7746,#7935);+#7935 = DEFINITIONAL_REPRESENTATION('',(#7936),#7940);+#7936 = LINE('',#7937,#7938);+#7937 = CARTESIAN_POINT('',(0.227057976796,-0.434182274245));+#7938 = VECTOR('',#7939,1.);+#7939 = DIRECTION('',(0.,-1.));+#7940 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7941 = ORIENTED_EDGE('',*,*,#7890,.F.);+#7942 = ORIENTED_EDGE('',*,*,#7943,.F.);+#7943 = EDGE_CURVE('',#7944,#7868,#7946,.T.);+#7944 = VERTEX_POINT('',#7945);+#7945 = CARTESIAN_POINT('',(2.2,-2.125,0.445));+#7946 = SURFACE_CURVE('',#7947,(#7951,#7958),.PCURVE_S1.);+#7947 = LINE('',#7948,#7949);+#7948 = CARTESIAN_POINT('',(2.2,-2.125,0.445));+#7949 = VECTOR('',#7950,1.);+#7950 = DIRECTION('',(-1.,0.,0.));+#7951 = PCURVE('',#7904,#7952);+#7952 = DEFINITIONAL_REPRESENTATION('',(#7953),#7957);+#7953 = LINE('',#7954,#7955);+#7954 = CARTESIAN_POINT('',(0.,0.15));+#7955 = VECTOR('',#7956,1.);+#7956 = DIRECTION('',(1.,0.));+#7957 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7958 = PCURVE('',#7802,#7959);+#7959 = DEFINITIONAL_REPRESENTATION('',(#7960),#7964);+#7960 = LINE('',#7961,#7962);+#7961 = CARTESIAN_POINT('',(0.227057976796,-0.434182274245));+#7962 = VECTOR('',#7963,1.);+#7963 = DIRECTION('',(0.,-1.));+#7964 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7965 = ORIENTED_EDGE('',*,*,#7966,.T.);+#7966 = EDGE_CURVE('',#7944,#7920,#7967,.T.);+#7967 = SURFACE_CURVE('',#7968,(#7972,#7979),.PCURVE_S1.);+#7968 = LINE('',#7969,#7970);+#7969 = CARTESIAN_POINT('',(2.2,-2.125,0.445));+#7970 = VECTOR('',#7971,1.);+#7971 = DIRECTION('',(0.,-1.,0.));+#7972 = PCURVE('',#7904,#7973);+#7973 = DEFINITIONAL_REPRESENTATION('',(#7974),#7978);+#7974 = LINE('',#7975,#7976);+#7975 = CARTESIAN_POINT('',(0.,0.15));+#7976 = VECTOR('',#7977,1.);+#7977 = DIRECTION('',(0.,-1.));+#7978 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7979 = PCURVE('',#7980,#7985);+#7980 = PLANE('',#7981);+#7981 = AXIS2_PLACEMENT_3D('',#7982,#7983,#7984);+#7982 = CARTESIAN_POINT('',(2.4875,-2.275,0.));+#7983 = DIRECTION('',(-0.839949759337,-0.,-0.542664170358));+#7984 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#7985 = DEFINITIONAL_REPRESENTATION('',(#7986),#7990);+#7986 = LINE('',#7987,#7988);+#7987 = CARTESIAN_POINT('',(0.529793591883,0.15));+#7988 = VECTOR('',#7989,1.);+#7989 = DIRECTION('',(0.,-1.));+#7990 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7991 = ADVANCED_FACE('',(#7992),#7980,.T.);+#7992 = FACE_BOUND('',#7993,.T.);+#7993 = EDGE_LOOP('',(#7994,#8024,#8045,#8046));+#7994 = ORIENTED_EDGE('',*,*,#7995,.F.);+#7995 = EDGE_CURVE('',#7996,#7998,#8000,.T.);+#7996 = VERTEX_POINT('',#7997);+#7997 = CARTESIAN_POINT('',(2.4875,-2.425,0.));+#7998 = VERTEX_POINT('',#7999);+#7999 = CARTESIAN_POINT('',(2.4875,-2.125,0.));+#8000 = SURFACE_CURVE('',#8001,(#8005,#8012),.PCURVE_S1.);+#8001 = LINE('',#8002,#8003);+#8002 = CARTESIAN_POINT('',(2.4875,-2.425,0.));+#8003 = VECTOR('',#8004,1.);+#8004 = DIRECTION('',(0.,1.,0.));+#8005 = PCURVE('',#7980,#8006);+#8006 = DEFINITIONAL_REPRESENTATION('',(#8007),#8011);+#8007 = LINE('',#8008,#8009);+#8008 = CARTESIAN_POINT('',(0.,-0.15));+#8009 = VECTOR('',#8010,1.);+#8010 = DIRECTION('',(0.,1.));+#8011 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8012 = PCURVE('',#8013,#8018);+#8013 = PLANE('',#8014);+#8014 = AXIS2_PLACEMENT_3D('',#8015,#8016,#8017);+#8015 = CARTESIAN_POINT('',(3.205,-2.275,0.));+#8016 = DIRECTION('',(-0.,-0.,-1.));+#8017 = DIRECTION('',(-1.,0.,0.));+#8018 = DEFINITIONAL_REPRESENTATION('',(#8019),#8023);+#8019 = LINE('',#8020,#8021);+#8020 = CARTESIAN_POINT('',(0.7175,-0.15));+#8021 = VECTOR('',#8022,1.);+#8022 = DIRECTION('',(0.,1.));+#8023 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8024 = ORIENTED_EDGE('',*,*,#8025,.T.);+#8025 = EDGE_CURVE('',#7996,#7920,#8026,.T.);+#8026 = SURFACE_CURVE('',#8027,(#8031,#8038),.PCURVE_S1.);+#8027 = LINE('',#8028,#8029);+#8028 = CARTESIAN_POINT('',(2.4875,-2.425,0.));+#8029 = VECTOR('',#8030,1.);+#8030 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#8031 = PCURVE('',#7980,#8032);+#8032 = DEFINITIONAL_REPRESENTATION('',(#8033),#8037);+#8033 = LINE('',#8034,#8035);+#8034 = CARTESIAN_POINT('',(0.,-0.15));+#8035 = VECTOR('',#8036,1.);+#8036 = DIRECTION('',(1.,0.));+#8037 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8038 = PCURVE('',#7746,#8039);+#8039 = DEFINITIONAL_REPRESENTATION('',(#8040),#8044);+#8040 = LINE('',#8041,#8042);+#8041 = CARTESIAN_POINT('',(-0.217942023204,-0.146682274245));+#8042 = VECTOR('',#8043,1.);+#8043 = DIRECTION('',(0.839949759337,-0.542664170358));+#8044 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8045 = ORIENTED_EDGE('',*,*,#7966,.F.);+#8046 = ORIENTED_EDGE('',*,*,#8047,.F.);+#8047 = EDGE_CURVE('',#7998,#7944,#8048,.T.);+#8048 = SURFACE_CURVE('',#8049,(#8053,#8060),.PCURVE_S1.);+#8049 = LINE('',#8050,#8051);+#8050 = CARTESIAN_POINT('',(2.4875,-2.125,0.));+#8051 = VECTOR('',#8052,1.);+#8052 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#8053 = PCURVE('',#7980,#8054);+#8054 = DEFINITIONAL_REPRESENTATION('',(#8055),#8059);+#8055 = LINE('',#8056,#8057);+#8056 = CARTESIAN_POINT('',(0.,0.15));+#8057 = VECTOR('',#8058,1.);+#8058 = DIRECTION('',(1.,0.));+#8059 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8060 = PCURVE('',#7802,#8061);+#8061 = DEFINITIONAL_REPRESENTATION('',(#8062),#8066);+#8062 = LINE('',#8063,#8064);+#8063 = CARTESIAN_POINT('',(-0.217942023204,-0.146682274245));+#8064 = VECTOR('',#8065,1.);+#8065 = DIRECTION('',(0.839949759337,-0.542664170358));+#8066 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8067 = ADVANCED_FACE('',(#8068),#8013,.T.);+#8068 = FACE_BOUND('',#8069,.T.);+#8069 = EDGE_LOOP('',(#8070,#8100,#8121,#8122));+#8070 = ORIENTED_EDGE('',*,*,#8071,.F.);+#8071 = EDGE_CURVE('',#8072,#8074,#8076,.T.);+#8072 = VERTEX_POINT('',#8073);+#8073 = CARTESIAN_POINT('',(3.205,-2.425,0.));+#8074 = VERTEX_POINT('',#8075);+#8075 = CARTESIAN_POINT('',(3.205,-2.125,0.));+#8076 = SURFACE_CURVE('',#8077,(#8081,#8088),.PCURVE_S1.);+#8077 = LINE('',#8078,#8079);+#8078 = CARTESIAN_POINT('',(3.205,-2.425,0.));+#8079 = VECTOR('',#8080,1.);+#8080 = DIRECTION('',(0.,1.,0.));+#8081 = PCURVE('',#8013,#8082);+#8082 = DEFINITIONAL_REPRESENTATION('',(#8083),#8087);+#8083 = LINE('',#8084,#8085);+#8084 = CARTESIAN_POINT('',(0.,-0.15));+#8085 = VECTOR('',#8086,1.);+#8086 = DIRECTION('',(0.,1.));+#8087 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8088 = PCURVE('',#8089,#8094);+#8089 = PLANE('',#8090);+#8090 = AXIS2_PLACEMENT_3D('',#8091,#8092,#8093);+#8091 = CARTESIAN_POINT('',(3.205,-2.275,0.15));+#8092 = DIRECTION('',(1.,0.,0.));+#8093 = DIRECTION('',(0.,0.,-1.));+#8094 = DEFINITIONAL_REPRESENTATION('',(#8095),#8099);+#8095 = LINE('',#8096,#8097);+#8096 = CARTESIAN_POINT('',(0.15,-0.15));+#8097 = VECTOR('',#8098,1.);+#8098 = DIRECTION('',(0.,1.));+#8099 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8100 = ORIENTED_EDGE('',*,*,#8101,.T.);+#8101 = EDGE_CURVE('',#8072,#7996,#8102,.T.);+#8102 = SURFACE_CURVE('',#8103,(#8107,#8114),.PCURVE_S1.);+#8103 = LINE('',#8104,#8105);+#8104 = CARTESIAN_POINT('',(3.205,-2.425,0.));+#8105 = VECTOR('',#8106,1.);+#8106 = DIRECTION('',(-1.,0.,0.));+#8107 = PCURVE('',#8013,#8108);+#8108 = DEFINITIONAL_REPRESENTATION('',(#8109),#8113);+#8109 = LINE('',#8110,#8111);+#8110 = CARTESIAN_POINT('',(0.,-0.15));+#8111 = VECTOR('',#8112,1.);+#8112 = DIRECTION('',(1.,0.));+#8113 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8114 = PCURVE('',#7746,#8115);+#8115 = DEFINITIONAL_REPRESENTATION('',(#8116),#8120);+#8116 = LINE('',#8117,#8118);+#8117 = CARTESIAN_POINT('',(-0.217942023204,0.570817725755));+#8118 = VECTOR('',#8119,1.);+#8119 = DIRECTION('',(0.,-1.));+#8120 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8121 = ORIENTED_EDGE('',*,*,#7995,.T.);+#8122 = ORIENTED_EDGE('',*,*,#8123,.F.);+#8123 = EDGE_CURVE('',#8074,#7998,#8124,.T.);+#8124 = SURFACE_CURVE('',#8125,(#8129,#8136),.PCURVE_S1.);+#8125 = LINE('',#8126,#8127);+#8126 = CARTESIAN_POINT('',(3.205,-2.125,0.));+#8127 = VECTOR('',#8128,1.);+#8128 = DIRECTION('',(-1.,0.,0.));+#8129 = PCURVE('',#8013,#8130);+#8130 = DEFINITIONAL_REPRESENTATION('',(#8131),#8135);+#8131 = LINE('',#8132,#8133);+#8132 = CARTESIAN_POINT('',(0.,0.15));+#8133 = VECTOR('',#8134,1.);+#8134 = DIRECTION('',(1.,0.));+#8135 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8136 = PCURVE('',#7802,#8137);+#8137 = DEFINITIONAL_REPRESENTATION('',(#8138),#8142);+#8138 = LINE('',#8139,#8140);+#8139 = CARTESIAN_POINT('',(-0.217942023204,0.570817725755));+#8140 = VECTOR('',#8141,1.);+#8141 = DIRECTION('',(0.,-1.));+#8142 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8143 = ADVANCED_FACE('',(#8144),#8089,.T.);+#8144 = FACE_BOUND('',#8145,.T.);+#8145 = EDGE_LOOP('',(#8146,#8176,#8197,#8198));+#8146 = ORIENTED_EDGE('',*,*,#8147,.F.);+#8147 = EDGE_CURVE('',#8148,#8150,#8152,.T.);+#8148 = VERTEX_POINT('',#8149);+#8149 = CARTESIAN_POINT('',(3.205,-2.425,0.15));+#8150 = VERTEX_POINT('',#8151);+#8151 = CARTESIAN_POINT('',(3.205,-2.125,0.15));+#8152 = SURFACE_CURVE('',#8153,(#8157,#8164),.PCURVE_S1.);+#8153 = LINE('',#8154,#8155);+#8154 = CARTESIAN_POINT('',(3.205,-2.425,0.15));+#8155 = VECTOR('',#8156,1.);+#8156 = DIRECTION('',(0.,1.,0.));+#8157 = PCURVE('',#8089,#8158);+#8158 = DEFINITIONAL_REPRESENTATION('',(#8159),#8163);+#8159 = LINE('',#8160,#8161);+#8160 = CARTESIAN_POINT('',(0.,-0.15));+#8161 = VECTOR('',#8162,1.);+#8162 = DIRECTION('',(0.,1.));+#8163 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8164 = PCURVE('',#8165,#8170);+#8165 = PLANE('',#8166);+#8166 = AXIS2_PLACEMENT_3D('',#8167,#8168,#8169);+#8167 = CARTESIAN_POINT('',(2.6375,-2.275,0.15));+#8168 = DIRECTION('',(0.,0.,1.));+#8169 = DIRECTION('',(1.,0.,0.));+#8170 = DEFINITIONAL_REPRESENTATION('',(#8171),#8175);+#8171 = LINE('',#8172,#8173);+#8172 = CARTESIAN_POINT('',(0.5675,-0.15));+#8173 = VECTOR('',#8174,1.);+#8174 = DIRECTION('',(0.,1.));+#8175 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8176 = ORIENTED_EDGE('',*,*,#8177,.T.);+#8177 = EDGE_CURVE('',#8148,#8072,#8178,.T.);+#8178 = SURFACE_CURVE('',#8179,(#8183,#8190),.PCURVE_S1.);+#8179 = LINE('',#8180,#8181);+#8180 = CARTESIAN_POINT('',(3.205,-2.425,0.15));+#8181 = VECTOR('',#8182,1.);+#8182 = DIRECTION('',(0.,0.,-1.));+#8183 = PCURVE('',#8089,#8184);+#8184 = DEFINITIONAL_REPRESENTATION('',(#8185),#8189);+#8185 = LINE('',#8186,#8187);+#8186 = CARTESIAN_POINT('',(0.,-0.15));+#8187 = VECTOR('',#8188,1.);+#8188 = DIRECTION('',(1.,0.));+#8189 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8190 = PCURVE('',#7746,#8191);+#8191 = DEFINITIONAL_REPRESENTATION('',(#8192),#8196);+#8192 = LINE('',#8193,#8194);+#8193 = CARTESIAN_POINT('',(-6.7942023204E-02,0.570817725755));+#8194 = VECTOR('',#8195,1.);+#8195 = DIRECTION('',(-1.,0.));+#8196 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8197 = ORIENTED_EDGE('',*,*,#8071,.T.);+#8198 = ORIENTED_EDGE('',*,*,#8199,.F.);+#8199 = EDGE_CURVE('',#8150,#8074,#8200,.T.);+#8200 = SURFACE_CURVE('',#8201,(#8205,#8212),.PCURVE_S1.);+#8201 = LINE('',#8202,#8203);+#8202 = CARTESIAN_POINT('',(3.205,-2.125,0.15));+#8203 = VECTOR('',#8204,1.);+#8204 = DIRECTION('',(0.,0.,-1.));+#8205 = PCURVE('',#8089,#8206);+#8206 = DEFINITIONAL_REPRESENTATION('',(#8207),#8211);+#8207 = LINE('',#8208,#8209);+#8208 = CARTESIAN_POINT('',(0.,0.15));+#8209 = VECTOR('',#8210,1.);+#8210 = DIRECTION('',(1.,0.));+#8211 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8212 = PCURVE('',#7802,#8213);+#8213 = DEFINITIONAL_REPRESENTATION('',(#8214),#8218);+#8214 = LINE('',#8215,#8216);+#8215 = CARTESIAN_POINT('',(-6.7942023204E-02,0.570817725755));+#8216 = VECTOR('',#8217,1.);+#8217 = DIRECTION('',(-1.,0.));+#8218 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8219 = ADVANCED_FACE('',(#8220),#8165,.T.);+#8220 = FACE_BOUND('',#8221,.T.);+#8221 = EDGE_LOOP('',(#8222,#8247,#8268,#8269));+#8222 = ORIENTED_EDGE('',*,*,#8223,.F.);+#8223 = EDGE_CURVE('',#8224,#8226,#8228,.T.);+#8224 = VERTEX_POINT('',#8225);+#8225 = CARTESIAN_POINT('',(2.6375,-2.425,0.15));+#8226 = VERTEX_POINT('',#8227);+#8227 = CARTESIAN_POINT('',(2.6375,-2.125,0.15));+#8228 = SURFACE_CURVE('',#8229,(#8233,#8240),.PCURVE_S1.);+#8229 = LINE('',#8230,#8231);+#8230 = CARTESIAN_POINT('',(2.6375,-2.425,0.15));+#8231 = VECTOR('',#8232,1.);+#8232 = DIRECTION('',(0.,1.,0.));+#8233 = PCURVE('',#8165,#8234);+#8234 = DEFINITIONAL_REPRESENTATION('',(#8235),#8239);+#8235 = LINE('',#8236,#8237);+#8236 = CARTESIAN_POINT('',(0.,-0.15));+#8237 = VECTOR('',#8238,1.);+#8238 = DIRECTION('',(0.,1.));+#8239 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8240 = PCURVE('',#7774,#8241);+#8241 = DEFINITIONAL_REPRESENTATION('',(#8242),#8246);+#8242 = LINE('',#8243,#8244);+#8243 = CARTESIAN_POINT('',(0.529793591883,-0.15));+#8244 = VECTOR('',#8245,1.);+#8245 = DIRECTION('',(0.,1.));+#8246 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8247 = ORIENTED_EDGE('',*,*,#8248,.T.);+#8248 = EDGE_CURVE('',#8224,#8148,#8249,.T.);+#8249 = SURFACE_CURVE('',#8250,(#8254,#8261),.PCURVE_S1.);+#8250 = LINE('',#8251,#8252);+#8251 = CARTESIAN_POINT('',(2.6375,-2.425,0.15));+#8252 = VECTOR('',#8253,1.);+#8253 = DIRECTION('',(1.,0.,0.));+#8254 = PCURVE('',#8165,#8255);+#8255 = DEFINITIONAL_REPRESENTATION('',(#8256),#8260);+#8256 = LINE('',#8257,#8258);+#8257 = CARTESIAN_POINT('',(0.,-0.15));+#8258 = VECTOR('',#8259,1.);+#8259 = DIRECTION('',(1.,0.));+#8260 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8261 = PCURVE('',#7746,#8262);+#8262 = DEFINITIONAL_REPRESENTATION('',(#8263),#8267);+#8263 = LINE('',#8264,#8265);+#8264 = CARTESIAN_POINT('',(-6.7942023204E-02,3.317725755E-03));+#8265 = VECTOR('',#8266,1.);+#8266 = DIRECTION('',(0.,1.));+#8267 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8268 = ORIENTED_EDGE('',*,*,#8147,.T.);+#8269 = ORIENTED_EDGE('',*,*,#8270,.F.);+#8270 = EDGE_CURVE('',#8226,#8150,#8271,.T.);+#8271 = SURFACE_CURVE('',#8272,(#8276,#8283),.PCURVE_S1.);+#8272 = LINE('',#8273,#8274);+#8273 = CARTESIAN_POINT('',(2.6375,-2.125,0.15));+#8274 = VECTOR('',#8275,1.);+#8275 = DIRECTION('',(1.,0.,0.));+#8276 = PCURVE('',#8165,#8277);+#8277 = DEFINITIONAL_REPRESENTATION('',(#8278),#8282);+#8278 = LINE('',#8279,#8280);+#8279 = CARTESIAN_POINT('',(0.,0.15));+#8280 = VECTOR('',#8281,1.);+#8281 = DIRECTION('',(1.,0.));+#8282 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8283 = PCURVE('',#7802,#8284);+#8284 = DEFINITIONAL_REPRESENTATION('',(#8285),#8289);+#8285 = LINE('',#8286,#8287);+#8286 = CARTESIAN_POINT('',(-6.7942023204E-02,3.317725755E-03));+#8287 = VECTOR('',#8288,1.);+#8288 = DIRECTION('',(0.,1.));+#8289 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8290 = ADVANCED_FACE('',(#8291),#7802,.T.);+#8291 = FACE_BOUND('',#8292,.T.);+#8292 = EDGE_LOOP('',(#8293,#8294,#8315,#8316,#8317,#8318,#8319,#8320));+#8293 = ORIENTED_EDGE('',*,*,#7786,.T.);+#8294 = ORIENTED_EDGE('',*,*,#8295,.T.);+#8295 = EDGE_CURVE('',#7759,#8226,#8296,.T.);+#8296 = SURFACE_CURVE('',#8297,(#8301,#8308),.PCURVE_S1.);+#8297 = LINE('',#8298,#8299);+#8298 = CARTESIAN_POINT('',(2.35,-2.125,0.595));+#8299 = VECTOR('',#8300,1.);+#8300 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#8301 = PCURVE('',#7802,#8302);+#8302 = DEFINITIONAL_REPRESENTATION('',(#8303),#8307);+#8303 = LINE('',#8304,#8305);+#8304 = CARTESIAN_POINT('',(0.377057976796,-0.284182274245));+#8305 = VECTOR('',#8306,1.);+#8306 = DIRECTION('',(-0.839949759337,0.542664170358));+#8307 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8308 = PCURVE('',#7774,#8309);+#8309 = DEFINITIONAL_REPRESENTATION('',(#8310),#8314);+#8310 = LINE('',#8311,#8312);+#8311 = CARTESIAN_POINT('',(0.,0.15));+#8312 = VECTOR('',#8313,1.);+#8313 = DIRECTION('',(1.,0.));+#8314 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8315 = ORIENTED_EDGE('',*,*,#8270,.T.);+#8316 = ORIENTED_EDGE('',*,*,#8199,.T.);+#8317 = ORIENTED_EDGE('',*,*,#8123,.T.);+#8318 = ORIENTED_EDGE('',*,*,#8047,.T.);+#8319 = ORIENTED_EDGE('',*,*,#7943,.T.);+#8320 = ORIENTED_EDGE('',*,*,#7867,.T.);+#8321 = ADVANCED_FACE('',(#8322),#7774,.T.);+#8322 = FACE_BOUND('',#8323,.T.);+#8323 = EDGE_LOOP('',(#8324,#8325,#8346,#8347));+#8324 = ORIENTED_EDGE('',*,*,#7758,.F.);+#8325 = ORIENTED_EDGE('',*,*,#8326,.T.);+#8326 = EDGE_CURVE('',#7726,#8224,#8327,.T.);+#8327 = SURFACE_CURVE('',#8328,(#8332,#8339),.PCURVE_S1.);+#8328 = LINE('',#8329,#8330);+#8329 = CARTESIAN_POINT('',(2.35,-2.425,0.595));+#8330 = VECTOR('',#8331,1.);+#8331 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#8332 = PCURVE('',#7774,#8333);+#8333 = DEFINITIONAL_REPRESENTATION('',(#8334),#8338);+#8334 = LINE('',#8335,#8336);+#8335 = CARTESIAN_POINT('',(0.,-0.15));+#8336 = VECTOR('',#8337,1.);+#8337 = DIRECTION('',(1.,0.));+#8338 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8339 = PCURVE('',#7746,#8340);+#8340 = DEFINITIONAL_REPRESENTATION('',(#8341),#8345);+#8341 = LINE('',#8342,#8343);+#8342 = CARTESIAN_POINT('',(0.377057976796,-0.284182274245));+#8343 = VECTOR('',#8344,1.);+#8344 = DIRECTION('',(-0.839949759337,0.542664170358));+#8345 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8346 = ORIENTED_EDGE('',*,*,#8223,.T.);+#8347 = ORIENTED_EDGE('',*,*,#8295,.F.);+#8348 = ADVANCED_FACE('',(#8349),#7746,.F.);+#8349 = FACE_BOUND('',#8350,.F.);+#8350 = EDGE_LOOP('',(#8351,#8352,#8353,#8354,#8355,#8356,#8357,#8358));+#8351 = ORIENTED_EDGE('',*,*,#7723,.T.);+#8352 = ORIENTED_EDGE('',*,*,#8326,.T.);+#8353 = ORIENTED_EDGE('',*,*,#8248,.T.);+#8354 = ORIENTED_EDGE('',*,*,#8177,.T.);+#8355 = ORIENTED_EDGE('',*,*,#8101,.T.);+#8356 = ORIENTED_EDGE('',*,*,#8025,.T.);+#8357 = ORIENTED_EDGE('',*,*,#7919,.T.);+#8358 = ORIENTED_EDGE('',*,*,#7843,.T.);+#8359 = MANIFOLD_SOLID_BREP('',#8360);+#8360 = CLOSED_SHELL('',(#8361,#8481,#8557,#8633,#8709,#8785,#8861,#8932+ ,#8963,#8990));+#8361 = ADVANCED_FACE('',(#8362),#8376,.T.);+#8362 = FACE_BOUND('',#8363,.T.);+#8363 = EDGE_LOOP('',(#8364,#8399,#8427,#8455));+#8364 = ORIENTED_EDGE('',*,*,#8365,.T.);+#8365 = EDGE_CURVE('',#8366,#8368,#8370,.T.);+#8366 = VERTEX_POINT('',#8367);+#8367 = CARTESIAN_POINT('',(2.15,-1.775,0.595));+#8368 = VERTEX_POINT('',#8369);+#8369 = CARTESIAN_POINT('',(2.35,-1.775,0.595));+#8370 = SURFACE_CURVE('',#8371,(#8375,#8387),.PCURVE_S1.);+#8371 = LINE('',#8372,#8373);+#8372 = CARTESIAN_POINT('',(2.15,-1.775,0.595));+#8373 = VECTOR('',#8374,1.);+#8374 = DIRECTION('',(1.,0.,0.));+#8375 = PCURVE('',#8376,#8381);+#8376 = PLANE('',#8377);+#8377 = AXIS2_PLACEMENT_3D('',#8378,#8379,#8380);+#8378 = CARTESIAN_POINT('',(2.15,-1.625,0.595));+#8379 = DIRECTION('',(0.,0.,1.));+#8380 = DIRECTION('',(1.,0.,0.));+#8381 = DEFINITIONAL_REPRESENTATION('',(#8382),#8386);+#8382 = LINE('',#8383,#8384);+#8383 = CARTESIAN_POINT('',(0.,-0.15));+#8384 = VECTOR('',#8385,1.);+#8385 = DIRECTION('',(1.,0.));+#8386 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8387 = PCURVE('',#8388,#8393);+#8388 = PLANE('',#8389);+#8389 = AXIS2_PLACEMENT_3D('',#8390,#8391,#8392);+#8390 = CARTESIAN_POINT('',(2.634182274245,-1.775,0.217942023204));+#8391 = DIRECTION('',(0.,1.,0.));+#8392 = DIRECTION('',(0.,0.,1.));+#8393 = DEFINITIONAL_REPRESENTATION('',(#8394),#8398);+#8394 = LINE('',#8395,#8396);+#8395 = CARTESIAN_POINT('',(0.377057976796,-0.484182274245));+#8396 = VECTOR('',#8397,1.);+#8397 = DIRECTION('',(0.,1.));+#8398 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8399 = ORIENTED_EDGE('',*,*,#8400,.T.);+#8400 = EDGE_CURVE('',#8368,#8401,#8403,.T.);+#8401 = VERTEX_POINT('',#8402);+#8402 = CARTESIAN_POINT('',(2.35,-1.475,0.595));+#8403 = SURFACE_CURVE('',#8404,(#8408,#8415),.PCURVE_S1.);+#8404 = LINE('',#8405,#8406);+#8405 = CARTESIAN_POINT('',(2.35,-1.775,0.595));+#8406 = VECTOR('',#8407,1.);+#8407 = DIRECTION('',(0.,1.,0.));+#8408 = PCURVE('',#8376,#8409);+#8409 = DEFINITIONAL_REPRESENTATION('',(#8410),#8414);+#8410 = LINE('',#8411,#8412);+#8411 = CARTESIAN_POINT('',(0.2,-0.15));+#8412 = VECTOR('',#8413,1.);+#8413 = DIRECTION('',(0.,1.));+#8414 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8415 = PCURVE('',#8416,#8421);+#8416 = PLANE('',#8417);+#8417 = AXIS2_PLACEMENT_3D('',#8418,#8419,#8420);+#8418 = CARTESIAN_POINT('',(2.35,-1.625,0.595));+#8419 = DIRECTION('',(0.839949759337,0.,0.542664170358));+#8420 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#8421 = DEFINITIONAL_REPRESENTATION('',(#8422),#8426);+#8422 = LINE('',#8423,#8424);+#8423 = CARTESIAN_POINT('',(0.,-0.15));+#8424 = VECTOR('',#8425,1.);+#8425 = DIRECTION('',(0.,1.));+#8426 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8427 = ORIENTED_EDGE('',*,*,#8428,.F.);+#8428 = EDGE_CURVE('',#8429,#8401,#8431,.T.);+#8429 = VERTEX_POINT('',#8430);+#8430 = CARTESIAN_POINT('',(2.15,-1.475,0.595));+#8431 = SURFACE_CURVE('',#8432,(#8436,#8443),.PCURVE_S1.);+#8432 = LINE('',#8433,#8434);+#8433 = CARTESIAN_POINT('',(2.15,-1.475,0.595));+#8434 = VECTOR('',#8435,1.);+#8435 = DIRECTION('',(1.,0.,0.));+#8436 = PCURVE('',#8376,#8437);+#8437 = DEFINITIONAL_REPRESENTATION('',(#8438),#8442);+#8438 = LINE('',#8439,#8440);+#8439 = CARTESIAN_POINT('',(0.,0.15));+#8440 = VECTOR('',#8441,1.);+#8441 = DIRECTION('',(1.,0.));+#8442 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8443 = PCURVE('',#8444,#8449);+#8444 = PLANE('',#8445);+#8445 = AXIS2_PLACEMENT_3D('',#8446,#8447,#8448);+#8446 = CARTESIAN_POINT('',(2.634182274245,-1.475,0.217942023204));+#8447 = DIRECTION('',(0.,1.,0.));+#8448 = DIRECTION('',(0.,0.,1.));+#8449 = DEFINITIONAL_REPRESENTATION('',(#8450),#8454);+#8450 = LINE('',#8451,#8452);+#8451 = CARTESIAN_POINT('',(0.377057976796,-0.484182274245));+#8452 = VECTOR('',#8453,1.);+#8453 = DIRECTION('',(0.,1.));+#8454 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8455 = ORIENTED_EDGE('',*,*,#8456,.T.);+#8456 = EDGE_CURVE('',#8429,#8366,#8457,.T.);+#8457 = SURFACE_CURVE('',#8458,(#8462,#8469),.PCURVE_S1.);+#8458 = LINE('',#8459,#8460);+#8459 = CARTESIAN_POINT('',(2.15,-1.475,0.595));+#8460 = VECTOR('',#8461,1.);+#8461 = DIRECTION('',(0.,-1.,0.));+#8462 = PCURVE('',#8376,#8463);+#8463 = DEFINITIONAL_REPRESENTATION('',(#8464),#8468);+#8464 = LINE('',#8465,#8466);+#8465 = CARTESIAN_POINT('',(0.,0.15));+#8466 = VECTOR('',#8467,1.);+#8467 = DIRECTION('',(0.,-1.));+#8468 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8469 = PCURVE('',#8470,#8475);+#8470 = PLANE('',#8471);+#8471 = AXIS2_PLACEMENT_3D('',#8472,#8473,#8474);+#8472 = CARTESIAN_POINT('',(2.15,-1.625,0.445));+#8473 = DIRECTION('',(-1.,0.,0.));+#8474 = DIRECTION('',(0.,0.,1.));+#8475 = DEFINITIONAL_REPRESENTATION('',(#8476),#8480);+#8476 = LINE('',#8477,#8478);+#8477 = CARTESIAN_POINT('',(0.15,0.15));+#8478 = VECTOR('',#8479,1.);+#8479 = DIRECTION('',(0.,-1.));+#8480 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8481 = ADVANCED_FACE('',(#8482),#8470,.T.);+#8482 = FACE_BOUND('',#8483,.T.);+#8483 = EDGE_LOOP('',(#8484,#8507,#8508,#8531));+#8484 = ORIENTED_EDGE('',*,*,#8485,.T.);+#8485 = EDGE_CURVE('',#8486,#8366,#8488,.T.);+#8486 = VERTEX_POINT('',#8487);+#8487 = CARTESIAN_POINT('',(2.15,-1.775,0.445));+#8488 = SURFACE_CURVE('',#8489,(#8493,#8500),.PCURVE_S1.);+#8489 = LINE('',#8490,#8491);+#8490 = CARTESIAN_POINT('',(2.15,-1.775,0.445));+#8491 = VECTOR('',#8492,1.);+#8492 = DIRECTION('',(0.,0.,1.));+#8493 = PCURVE('',#8470,#8494);+#8494 = DEFINITIONAL_REPRESENTATION('',(#8495),#8499);+#8495 = LINE('',#8496,#8497);+#8496 = CARTESIAN_POINT('',(0.,-0.15));+#8497 = VECTOR('',#8498,1.);+#8498 = DIRECTION('',(1.,0.));+#8499 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8500 = PCURVE('',#8388,#8501);+#8501 = DEFINITIONAL_REPRESENTATION('',(#8502),#8506);+#8502 = LINE('',#8503,#8504);+#8503 = CARTESIAN_POINT('',(0.227057976796,-0.484182274245));+#8504 = VECTOR('',#8505,1.);+#8505 = DIRECTION('',(1.,0.));+#8506 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8507 = ORIENTED_EDGE('',*,*,#8456,.F.);+#8508 = ORIENTED_EDGE('',*,*,#8509,.F.);+#8509 = EDGE_CURVE('',#8510,#8429,#8512,.T.);+#8510 = VERTEX_POINT('',#8511);+#8511 = CARTESIAN_POINT('',(2.15,-1.475,0.445));+#8512 = SURFACE_CURVE('',#8513,(#8517,#8524),.PCURVE_S1.);+#8513 = LINE('',#8514,#8515);+#8514 = CARTESIAN_POINT('',(2.15,-1.475,0.445));+#8515 = VECTOR('',#8516,1.);+#8516 = DIRECTION('',(0.,0.,1.));+#8517 = PCURVE('',#8470,#8518);+#8518 = DEFINITIONAL_REPRESENTATION('',(#8519),#8523);+#8519 = LINE('',#8520,#8521);+#8520 = CARTESIAN_POINT('',(0.,0.15));+#8521 = VECTOR('',#8522,1.);+#8522 = DIRECTION('',(1.,0.));+#8523 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8524 = PCURVE('',#8444,#8525);+#8525 = DEFINITIONAL_REPRESENTATION('',(#8526),#8530);+#8526 = LINE('',#8527,#8528);+#8527 = CARTESIAN_POINT('',(0.227057976796,-0.484182274245));+#8528 = VECTOR('',#8529,1.);+#8529 = DIRECTION('',(1.,0.));+#8530 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8531 = ORIENTED_EDGE('',*,*,#8532,.T.);+#8532 = EDGE_CURVE('',#8510,#8486,#8533,.T.);+#8533 = SURFACE_CURVE('',#8534,(#8538,#8545),.PCURVE_S1.);+#8534 = LINE('',#8535,#8536);+#8535 = CARTESIAN_POINT('',(2.15,-1.475,0.445));+#8536 = VECTOR('',#8537,1.);+#8537 = DIRECTION('',(0.,-1.,0.));+#8538 = PCURVE('',#8470,#8539);+#8539 = DEFINITIONAL_REPRESENTATION('',(#8540),#8544);+#8540 = LINE('',#8541,#8542);+#8541 = CARTESIAN_POINT('',(0.,0.15));+#8542 = VECTOR('',#8543,1.);+#8543 = DIRECTION('',(0.,-1.));+#8544 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8545 = PCURVE('',#8546,#8551);+#8546 = PLANE('',#8547);+#8547 = AXIS2_PLACEMENT_3D('',#8548,#8549,#8550);+#8548 = CARTESIAN_POINT('',(2.2,-1.625,0.445));+#8549 = DIRECTION('',(-0.,-0.,-1.));+#8550 = DIRECTION('',(-1.,0.,0.));+#8551 = DEFINITIONAL_REPRESENTATION('',(#8552),#8556);+#8552 = LINE('',#8553,#8554);+#8553 = CARTESIAN_POINT('',(5.E-02,0.15));+#8554 = VECTOR('',#8555,1.);+#8555 = DIRECTION('',(0.,-1.));+#8556 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8557 = ADVANCED_FACE('',(#8558),#8546,.T.);+#8558 = FACE_BOUND('',#8559,.T.);+#8559 = EDGE_LOOP('',(#8560,#8583,#8584,#8607));+#8560 = ORIENTED_EDGE('',*,*,#8561,.T.);+#8561 = EDGE_CURVE('',#8562,#8486,#8564,.T.);+#8562 = VERTEX_POINT('',#8563);+#8563 = CARTESIAN_POINT('',(2.2,-1.775,0.445));+#8564 = SURFACE_CURVE('',#8565,(#8569,#8576),.PCURVE_S1.);+#8565 = LINE('',#8566,#8567);+#8566 = CARTESIAN_POINT('',(2.2,-1.775,0.445));+#8567 = VECTOR('',#8568,1.);+#8568 = DIRECTION('',(-1.,0.,0.));+#8569 = PCURVE('',#8546,#8570);+#8570 = DEFINITIONAL_REPRESENTATION('',(#8571),#8575);+#8571 = LINE('',#8572,#8573);+#8572 = CARTESIAN_POINT('',(0.,-0.15));+#8573 = VECTOR('',#8574,1.);+#8574 = DIRECTION('',(1.,0.));+#8575 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8576 = PCURVE('',#8388,#8577);+#8577 = DEFINITIONAL_REPRESENTATION('',(#8578),#8582);+#8578 = LINE('',#8579,#8580);+#8579 = CARTESIAN_POINT('',(0.227057976796,-0.434182274245));+#8580 = VECTOR('',#8581,1.);+#8581 = DIRECTION('',(0.,-1.));+#8582 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8583 = ORIENTED_EDGE('',*,*,#8532,.F.);+#8584 = ORIENTED_EDGE('',*,*,#8585,.F.);+#8585 = EDGE_CURVE('',#8586,#8510,#8588,.T.);+#8586 = VERTEX_POINT('',#8587);+#8587 = CARTESIAN_POINT('',(2.2,-1.475,0.445));+#8588 = SURFACE_CURVE('',#8589,(#8593,#8600),.PCURVE_S1.);+#8589 = LINE('',#8590,#8591);+#8590 = CARTESIAN_POINT('',(2.2,-1.475,0.445));+#8591 = VECTOR('',#8592,1.);+#8592 = DIRECTION('',(-1.,0.,0.));+#8593 = PCURVE('',#8546,#8594);+#8594 = DEFINITIONAL_REPRESENTATION('',(#8595),#8599);+#8595 = LINE('',#8596,#8597);+#8596 = CARTESIAN_POINT('',(0.,0.15));+#8597 = VECTOR('',#8598,1.);+#8598 = DIRECTION('',(1.,0.));+#8599 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8600 = PCURVE('',#8444,#8601);+#8601 = DEFINITIONAL_REPRESENTATION('',(#8602),#8606);+#8602 = LINE('',#8603,#8604);+#8603 = CARTESIAN_POINT('',(0.227057976796,-0.434182274245));+#8604 = VECTOR('',#8605,1.);+#8605 = DIRECTION('',(0.,-1.));+#8606 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8607 = ORIENTED_EDGE('',*,*,#8608,.T.);+#8608 = EDGE_CURVE('',#8586,#8562,#8609,.T.);+#8609 = SURFACE_CURVE('',#8610,(#8614,#8621),.PCURVE_S1.);+#8610 = LINE('',#8611,#8612);+#8611 = CARTESIAN_POINT('',(2.2,-1.475,0.445));+#8612 = VECTOR('',#8613,1.);+#8613 = DIRECTION('',(0.,-1.,0.));+#8614 = PCURVE('',#8546,#8615);+#8615 = DEFINITIONAL_REPRESENTATION('',(#8616),#8620);+#8616 = LINE('',#8617,#8618);+#8617 = CARTESIAN_POINT('',(0.,0.15));+#8618 = VECTOR('',#8619,1.);+#8619 = DIRECTION('',(0.,-1.));+#8620 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8621 = PCURVE('',#8622,#8627);+#8622 = PLANE('',#8623);+#8623 = AXIS2_PLACEMENT_3D('',#8624,#8625,#8626);+#8624 = CARTESIAN_POINT('',(2.4875,-1.625,0.));+#8625 = DIRECTION('',(-0.839949759337,-0.,-0.542664170358));+#8626 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#8627 = DEFINITIONAL_REPRESENTATION('',(#8628),#8632);+#8628 = LINE('',#8629,#8630);+#8629 = CARTESIAN_POINT('',(0.529793591883,0.15));+#8630 = VECTOR('',#8631,1.);+#8631 = DIRECTION('',(0.,-1.));+#8632 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8633 = ADVANCED_FACE('',(#8634),#8622,.T.);+#8634 = FACE_BOUND('',#8635,.T.);+#8635 = EDGE_LOOP('',(#8636,#8666,#8687,#8688));+#8636 = ORIENTED_EDGE('',*,*,#8637,.F.);+#8637 = EDGE_CURVE('',#8638,#8640,#8642,.T.);+#8638 = VERTEX_POINT('',#8639);+#8639 = CARTESIAN_POINT('',(2.4875,-1.775,0.));+#8640 = VERTEX_POINT('',#8641);+#8641 = CARTESIAN_POINT('',(2.4875,-1.475,0.));+#8642 = SURFACE_CURVE('',#8643,(#8647,#8654),.PCURVE_S1.);+#8643 = LINE('',#8644,#8645);+#8644 = CARTESIAN_POINT('',(2.4875,-1.775,0.));+#8645 = VECTOR('',#8646,1.);+#8646 = DIRECTION('',(0.,1.,0.));+#8647 = PCURVE('',#8622,#8648);+#8648 = DEFINITIONAL_REPRESENTATION('',(#8649),#8653);+#8649 = LINE('',#8650,#8651);+#8650 = CARTESIAN_POINT('',(0.,-0.15));+#8651 = VECTOR('',#8652,1.);+#8652 = DIRECTION('',(0.,1.));+#8653 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8654 = PCURVE('',#8655,#8660);+#8655 = PLANE('',#8656);+#8656 = AXIS2_PLACEMENT_3D('',#8657,#8658,#8659);+#8657 = CARTESIAN_POINT('',(3.205,-1.625,0.));+#8658 = DIRECTION('',(-0.,-0.,-1.));+#8659 = DIRECTION('',(-1.,0.,0.));+#8660 = DEFINITIONAL_REPRESENTATION('',(#8661),#8665);+#8661 = LINE('',#8662,#8663);+#8662 = CARTESIAN_POINT('',(0.7175,-0.15));+#8663 = VECTOR('',#8664,1.);+#8664 = DIRECTION('',(0.,1.));+#8665 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8666 = ORIENTED_EDGE('',*,*,#8667,.T.);+#8667 = EDGE_CURVE('',#8638,#8562,#8668,.T.);+#8668 = SURFACE_CURVE('',#8669,(#8673,#8680),.PCURVE_S1.);+#8669 = LINE('',#8670,#8671);+#8670 = CARTESIAN_POINT('',(2.4875,-1.775,0.));+#8671 = VECTOR('',#8672,1.);+#8672 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#8673 = PCURVE('',#8622,#8674);+#8674 = DEFINITIONAL_REPRESENTATION('',(#8675),#8679);+#8675 = LINE('',#8676,#8677);+#8676 = CARTESIAN_POINT('',(0.,-0.15));+#8677 = VECTOR('',#8678,1.);+#8678 = DIRECTION('',(1.,0.));+#8679 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8680 = PCURVE('',#8388,#8681);+#8681 = DEFINITIONAL_REPRESENTATION('',(#8682),#8686);+#8682 = LINE('',#8683,#8684);+#8683 = CARTESIAN_POINT('',(-0.217942023204,-0.146682274245));+#8684 = VECTOR('',#8685,1.);+#8685 = DIRECTION('',(0.839949759337,-0.542664170358));+#8686 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8687 = ORIENTED_EDGE('',*,*,#8608,.F.);+#8688 = ORIENTED_EDGE('',*,*,#8689,.F.);+#8689 = EDGE_CURVE('',#8640,#8586,#8690,.T.);+#8690 = SURFACE_CURVE('',#8691,(#8695,#8702),.PCURVE_S1.);+#8691 = LINE('',#8692,#8693);+#8692 = CARTESIAN_POINT('',(2.4875,-1.475,0.));+#8693 = VECTOR('',#8694,1.);+#8694 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#8695 = PCURVE('',#8622,#8696);+#8696 = DEFINITIONAL_REPRESENTATION('',(#8697),#8701);+#8697 = LINE('',#8698,#8699);+#8698 = CARTESIAN_POINT('',(0.,0.15));+#8699 = VECTOR('',#8700,1.);+#8700 = DIRECTION('',(1.,0.));+#8701 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8702 = PCURVE('',#8444,#8703);+#8703 = DEFINITIONAL_REPRESENTATION('',(#8704),#8708);+#8704 = LINE('',#8705,#8706);+#8705 = CARTESIAN_POINT('',(-0.217942023204,-0.146682274245));+#8706 = VECTOR('',#8707,1.);+#8707 = DIRECTION('',(0.839949759337,-0.542664170358));+#8708 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8709 = ADVANCED_FACE('',(#8710),#8655,.T.);+#8710 = FACE_BOUND('',#8711,.T.);+#8711 = EDGE_LOOP('',(#8712,#8742,#8763,#8764));+#8712 = ORIENTED_EDGE('',*,*,#8713,.F.);+#8713 = EDGE_CURVE('',#8714,#8716,#8718,.T.);+#8714 = VERTEX_POINT('',#8715);+#8715 = CARTESIAN_POINT('',(3.205,-1.775,0.));+#8716 = VERTEX_POINT('',#8717);+#8717 = CARTESIAN_POINT('',(3.205,-1.475,0.));+#8718 = SURFACE_CURVE('',#8719,(#8723,#8730),.PCURVE_S1.);+#8719 = LINE('',#8720,#8721);+#8720 = CARTESIAN_POINT('',(3.205,-1.775,0.));+#8721 = VECTOR('',#8722,1.);+#8722 = DIRECTION('',(0.,1.,0.));+#8723 = PCURVE('',#8655,#8724);+#8724 = DEFINITIONAL_REPRESENTATION('',(#8725),#8729);+#8725 = LINE('',#8726,#8727);+#8726 = CARTESIAN_POINT('',(0.,-0.15));+#8727 = VECTOR('',#8728,1.);+#8728 = DIRECTION('',(0.,1.));+#8729 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8730 = PCURVE('',#8731,#8736);+#8731 = PLANE('',#8732);+#8732 = AXIS2_PLACEMENT_3D('',#8733,#8734,#8735);+#8733 = CARTESIAN_POINT('',(3.205,-1.625,0.15));+#8734 = DIRECTION('',(1.,0.,0.));+#8735 = DIRECTION('',(0.,0.,-1.));+#8736 = DEFINITIONAL_REPRESENTATION('',(#8737),#8741);+#8737 = LINE('',#8738,#8739);+#8738 = CARTESIAN_POINT('',(0.15,-0.15));+#8739 = VECTOR('',#8740,1.);+#8740 = DIRECTION('',(0.,1.));+#8741 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8742 = ORIENTED_EDGE('',*,*,#8743,.T.);+#8743 = EDGE_CURVE('',#8714,#8638,#8744,.T.);+#8744 = SURFACE_CURVE('',#8745,(#8749,#8756),.PCURVE_S1.);+#8745 = LINE('',#8746,#8747);+#8746 = CARTESIAN_POINT('',(3.205,-1.775,0.));+#8747 = VECTOR('',#8748,1.);+#8748 = DIRECTION('',(-1.,0.,0.));+#8749 = PCURVE('',#8655,#8750);+#8750 = DEFINITIONAL_REPRESENTATION('',(#8751),#8755);+#8751 = LINE('',#8752,#8753);+#8752 = CARTESIAN_POINT('',(0.,-0.15));+#8753 = VECTOR('',#8754,1.);+#8754 = DIRECTION('',(1.,0.));+#8755 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8756 = PCURVE('',#8388,#8757);+#8757 = DEFINITIONAL_REPRESENTATION('',(#8758),#8762);+#8758 = LINE('',#8759,#8760);+#8759 = CARTESIAN_POINT('',(-0.217942023204,0.570817725755));+#8760 = VECTOR('',#8761,1.);+#8761 = DIRECTION('',(0.,-1.));+#8762 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8763 = ORIENTED_EDGE('',*,*,#8637,.T.);+#8764 = ORIENTED_EDGE('',*,*,#8765,.F.);+#8765 = EDGE_CURVE('',#8716,#8640,#8766,.T.);+#8766 = SURFACE_CURVE('',#8767,(#8771,#8778),.PCURVE_S1.);+#8767 = LINE('',#8768,#8769);+#8768 = CARTESIAN_POINT('',(3.205,-1.475,0.));+#8769 = VECTOR('',#8770,1.);+#8770 = DIRECTION('',(-1.,0.,0.));+#8771 = PCURVE('',#8655,#8772);+#8772 = DEFINITIONAL_REPRESENTATION('',(#8773),#8777);+#8773 = LINE('',#8774,#8775);+#8774 = CARTESIAN_POINT('',(0.,0.15));+#8775 = VECTOR('',#8776,1.);+#8776 = DIRECTION('',(1.,0.));+#8777 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8778 = PCURVE('',#8444,#8779);+#8779 = DEFINITIONAL_REPRESENTATION('',(#8780),#8784);+#8780 = LINE('',#8781,#8782);+#8781 = CARTESIAN_POINT('',(-0.217942023204,0.570817725755));+#8782 = VECTOR('',#8783,1.);+#8783 = DIRECTION('',(0.,-1.));+#8784 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8785 = ADVANCED_FACE('',(#8786),#8731,.T.);+#8786 = FACE_BOUND('',#8787,.T.);+#8787 = EDGE_LOOP('',(#8788,#8818,#8839,#8840));+#8788 = ORIENTED_EDGE('',*,*,#8789,.F.);+#8789 = EDGE_CURVE('',#8790,#8792,#8794,.T.);+#8790 = VERTEX_POINT('',#8791);+#8791 = CARTESIAN_POINT('',(3.205,-1.775,0.15));+#8792 = VERTEX_POINT('',#8793);+#8793 = CARTESIAN_POINT('',(3.205,-1.475,0.15));+#8794 = SURFACE_CURVE('',#8795,(#8799,#8806),.PCURVE_S1.);+#8795 = LINE('',#8796,#8797);+#8796 = CARTESIAN_POINT('',(3.205,-1.775,0.15));+#8797 = VECTOR('',#8798,1.);+#8798 = DIRECTION('',(0.,1.,0.));+#8799 = PCURVE('',#8731,#8800);+#8800 = DEFINITIONAL_REPRESENTATION('',(#8801),#8805);+#8801 = LINE('',#8802,#8803);+#8802 = CARTESIAN_POINT('',(0.,-0.15));+#8803 = VECTOR('',#8804,1.);+#8804 = DIRECTION('',(0.,1.));+#8805 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8806 = PCURVE('',#8807,#8812);+#8807 = PLANE('',#8808);+#8808 = AXIS2_PLACEMENT_3D('',#8809,#8810,#8811);+#8809 = CARTESIAN_POINT('',(2.6375,-1.625,0.15));+#8810 = DIRECTION('',(0.,0.,1.));+#8811 = DIRECTION('',(1.,0.,0.));+#8812 = DEFINITIONAL_REPRESENTATION('',(#8813),#8817);+#8813 = LINE('',#8814,#8815);+#8814 = CARTESIAN_POINT('',(0.5675,-0.15));+#8815 = VECTOR('',#8816,1.);+#8816 = DIRECTION('',(0.,1.));+#8817 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8818 = ORIENTED_EDGE('',*,*,#8819,.T.);+#8819 = EDGE_CURVE('',#8790,#8714,#8820,.T.);+#8820 = SURFACE_CURVE('',#8821,(#8825,#8832),.PCURVE_S1.);+#8821 = LINE('',#8822,#8823);+#8822 = CARTESIAN_POINT('',(3.205,-1.775,0.15));+#8823 = VECTOR('',#8824,1.);+#8824 = DIRECTION('',(0.,0.,-1.));+#8825 = PCURVE('',#8731,#8826);+#8826 = DEFINITIONAL_REPRESENTATION('',(#8827),#8831);+#8827 = LINE('',#8828,#8829);+#8828 = CARTESIAN_POINT('',(0.,-0.15));+#8829 = VECTOR('',#8830,1.);+#8830 = DIRECTION('',(1.,0.));+#8831 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8832 = PCURVE('',#8388,#8833);+#8833 = DEFINITIONAL_REPRESENTATION('',(#8834),#8838);+#8834 = LINE('',#8835,#8836);+#8835 = CARTESIAN_POINT('',(-6.7942023204E-02,0.570817725755));+#8836 = VECTOR('',#8837,1.);+#8837 = DIRECTION('',(-1.,0.));+#8838 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8839 = ORIENTED_EDGE('',*,*,#8713,.T.);+#8840 = ORIENTED_EDGE('',*,*,#8841,.F.);+#8841 = EDGE_CURVE('',#8792,#8716,#8842,.T.);+#8842 = SURFACE_CURVE('',#8843,(#8847,#8854),.PCURVE_S1.);+#8843 = LINE('',#8844,#8845);+#8844 = CARTESIAN_POINT('',(3.205,-1.475,0.15));+#8845 = VECTOR('',#8846,1.);+#8846 = DIRECTION('',(0.,0.,-1.));+#8847 = PCURVE('',#8731,#8848);+#8848 = DEFINITIONAL_REPRESENTATION('',(#8849),#8853);+#8849 = LINE('',#8850,#8851);+#8850 = CARTESIAN_POINT('',(0.,0.15));+#8851 = VECTOR('',#8852,1.);+#8852 = DIRECTION('',(1.,0.));+#8853 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8854 = PCURVE('',#8444,#8855);+#8855 = DEFINITIONAL_REPRESENTATION('',(#8856),#8860);+#8856 = LINE('',#8857,#8858);+#8857 = CARTESIAN_POINT('',(-6.7942023204E-02,0.570817725755));+#8858 = VECTOR('',#8859,1.);+#8859 = DIRECTION('',(-1.,0.));+#8860 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8861 = ADVANCED_FACE('',(#8862),#8807,.T.);+#8862 = FACE_BOUND('',#8863,.T.);+#8863 = EDGE_LOOP('',(#8864,#8889,#8910,#8911));+#8864 = ORIENTED_EDGE('',*,*,#8865,.F.);+#8865 = EDGE_CURVE('',#8866,#8868,#8870,.T.);+#8866 = VERTEX_POINT('',#8867);+#8867 = CARTESIAN_POINT('',(2.6375,-1.775,0.15));+#8868 = VERTEX_POINT('',#8869);+#8869 = CARTESIAN_POINT('',(2.6375,-1.475,0.15));+#8870 = SURFACE_CURVE('',#8871,(#8875,#8882),.PCURVE_S1.);+#8871 = LINE('',#8872,#8873);+#8872 = CARTESIAN_POINT('',(2.6375,-1.775,0.15));+#8873 = VECTOR('',#8874,1.);+#8874 = DIRECTION('',(0.,1.,0.));+#8875 = PCURVE('',#8807,#8876);+#8876 = DEFINITIONAL_REPRESENTATION('',(#8877),#8881);+#8877 = LINE('',#8878,#8879);+#8878 = CARTESIAN_POINT('',(0.,-0.15));+#8879 = VECTOR('',#8880,1.);+#8880 = DIRECTION('',(0.,1.));+#8881 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8882 = PCURVE('',#8416,#8883);+#8883 = DEFINITIONAL_REPRESENTATION('',(#8884),#8888);+#8884 = LINE('',#8885,#8886);+#8885 = CARTESIAN_POINT('',(0.529793591883,-0.15));+#8886 = VECTOR('',#8887,1.);+#8887 = DIRECTION('',(0.,1.));+#8888 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8889 = ORIENTED_EDGE('',*,*,#8890,.T.);+#8890 = EDGE_CURVE('',#8866,#8790,#8891,.T.);+#8891 = SURFACE_CURVE('',#8892,(#8896,#8903),.PCURVE_S1.);+#8892 = LINE('',#8893,#8894);+#8893 = CARTESIAN_POINT('',(2.6375,-1.775,0.15));+#8894 = VECTOR('',#8895,1.);+#8895 = DIRECTION('',(1.,0.,0.));+#8896 = PCURVE('',#8807,#8897);+#8897 = DEFINITIONAL_REPRESENTATION('',(#8898),#8902);+#8898 = LINE('',#8899,#8900);+#8899 = CARTESIAN_POINT('',(0.,-0.15));+#8900 = VECTOR('',#8901,1.);+#8901 = DIRECTION('',(1.,0.));+#8902 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8903 = PCURVE('',#8388,#8904);+#8904 = DEFINITIONAL_REPRESENTATION('',(#8905),#8909);+#8905 = LINE('',#8906,#8907);+#8906 = CARTESIAN_POINT('',(-6.7942023204E-02,3.317725755E-03));+#8907 = VECTOR('',#8908,1.);+#8908 = DIRECTION('',(0.,1.));+#8909 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8910 = ORIENTED_EDGE('',*,*,#8789,.T.);+#8911 = ORIENTED_EDGE('',*,*,#8912,.F.);+#8912 = EDGE_CURVE('',#8868,#8792,#8913,.T.);+#8913 = SURFACE_CURVE('',#8914,(#8918,#8925),.PCURVE_S1.);+#8914 = LINE('',#8915,#8916);+#8915 = CARTESIAN_POINT('',(2.6375,-1.475,0.15));+#8916 = VECTOR('',#8917,1.);+#8917 = DIRECTION('',(1.,0.,0.));+#8918 = PCURVE('',#8807,#8919);+#8919 = DEFINITIONAL_REPRESENTATION('',(#8920),#8924);+#8920 = LINE('',#8921,#8922);+#8921 = CARTESIAN_POINT('',(0.,0.15));+#8922 = VECTOR('',#8923,1.);+#8923 = DIRECTION('',(1.,0.));+#8924 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8925 = PCURVE('',#8444,#8926);+#8926 = DEFINITIONAL_REPRESENTATION('',(#8927),#8931);+#8927 = LINE('',#8928,#8929);+#8928 = CARTESIAN_POINT('',(-6.7942023204E-02,3.317725755E-03));+#8929 = VECTOR('',#8930,1.);+#8930 = DIRECTION('',(0.,1.));+#8931 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8932 = ADVANCED_FACE('',(#8933),#8444,.T.);+#8933 = FACE_BOUND('',#8934,.T.);+#8934 = EDGE_LOOP('',(#8935,#8936,#8957,#8958,#8959,#8960,#8961,#8962));+#8935 = ORIENTED_EDGE('',*,*,#8428,.T.);+#8936 = ORIENTED_EDGE('',*,*,#8937,.T.);+#8937 = EDGE_CURVE('',#8401,#8868,#8938,.T.);+#8938 = SURFACE_CURVE('',#8939,(#8943,#8950),.PCURVE_S1.);+#8939 = LINE('',#8940,#8941);+#8940 = CARTESIAN_POINT('',(2.35,-1.475,0.595));+#8941 = VECTOR('',#8942,1.);+#8942 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#8943 = PCURVE('',#8444,#8944);+#8944 = DEFINITIONAL_REPRESENTATION('',(#8945),#8949);+#8945 = LINE('',#8946,#8947);+#8946 = CARTESIAN_POINT('',(0.377057976796,-0.284182274245));+#8947 = VECTOR('',#8948,1.);+#8948 = DIRECTION('',(-0.839949759337,0.542664170358));+#8949 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8950 = PCURVE('',#8416,#8951);+#8951 = DEFINITIONAL_REPRESENTATION('',(#8952),#8956);+#8952 = LINE('',#8953,#8954);+#8953 = CARTESIAN_POINT('',(0.,0.15));+#8954 = VECTOR('',#8955,1.);+#8955 = DIRECTION('',(1.,0.));+#8956 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8957 = ORIENTED_EDGE('',*,*,#8912,.T.);+#8958 = ORIENTED_EDGE('',*,*,#8841,.T.);+#8959 = ORIENTED_EDGE('',*,*,#8765,.T.);+#8960 = ORIENTED_EDGE('',*,*,#8689,.T.);+#8961 = ORIENTED_EDGE('',*,*,#8585,.T.);+#8962 = ORIENTED_EDGE('',*,*,#8509,.T.);+#8963 = ADVANCED_FACE('',(#8964),#8416,.T.);+#8964 = FACE_BOUND('',#8965,.T.);+#8965 = EDGE_LOOP('',(#8966,#8967,#8988,#8989));+#8966 = ORIENTED_EDGE('',*,*,#8400,.F.);+#8967 = ORIENTED_EDGE('',*,*,#8968,.T.);+#8968 = EDGE_CURVE('',#8368,#8866,#8969,.T.);+#8969 = SURFACE_CURVE('',#8970,(#8974,#8981),.PCURVE_S1.);+#8970 = LINE('',#8971,#8972);+#8971 = CARTESIAN_POINT('',(2.35,-1.775,0.595));+#8972 = VECTOR('',#8973,1.);+#8973 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#8974 = PCURVE('',#8416,#8975);+#8975 = DEFINITIONAL_REPRESENTATION('',(#8976),#8980);+#8976 = LINE('',#8977,#8978);+#8977 = CARTESIAN_POINT('',(0.,-0.15));+#8978 = VECTOR('',#8979,1.);+#8979 = DIRECTION('',(1.,0.));+#8980 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8981 = PCURVE('',#8388,#8982);+#8982 = DEFINITIONAL_REPRESENTATION('',(#8983),#8987);+#8983 = LINE('',#8984,#8985);+#8984 = CARTESIAN_POINT('',(0.377057976796,-0.284182274245));+#8985 = VECTOR('',#8986,1.);+#8986 = DIRECTION('',(-0.839949759337,0.542664170358));+#8987 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8988 = ORIENTED_EDGE('',*,*,#8865,.T.);+#8989 = ORIENTED_EDGE('',*,*,#8937,.F.);+#8990 = ADVANCED_FACE('',(#8991),#8388,.F.);+#8991 = FACE_BOUND('',#8992,.F.);+#8992 = EDGE_LOOP('',(#8993,#8994,#8995,#8996,#8997,#8998,#8999,#9000));+#8993 = ORIENTED_EDGE('',*,*,#8365,.T.);+#8994 = ORIENTED_EDGE('',*,*,#8968,.T.);+#8995 = ORIENTED_EDGE('',*,*,#8890,.T.);+#8996 = ORIENTED_EDGE('',*,*,#8819,.T.);+#8997 = ORIENTED_EDGE('',*,*,#8743,.T.);+#8998 = ORIENTED_EDGE('',*,*,#8667,.T.);+#8999 = ORIENTED_EDGE('',*,*,#8561,.T.);+#9000 = ORIENTED_EDGE('',*,*,#8485,.T.);+#9001 = MANIFOLD_SOLID_BREP('',#9002);+#9002 = CLOSED_SHELL('',(#9003,#9123,#9199,#9275,#9351,#9427,#9503,#9574+ ,#9605,#9632));+#9003 = ADVANCED_FACE('',(#9004),#9018,.T.);+#9004 = FACE_BOUND('',#9005,.T.);+#9005 = EDGE_LOOP('',(#9006,#9041,#9069,#9097));+#9006 = ORIENTED_EDGE('',*,*,#9007,.T.);+#9007 = EDGE_CURVE('',#9008,#9010,#9012,.T.);+#9008 = VERTEX_POINT('',#9009);+#9009 = CARTESIAN_POINT('',(2.15,-1.125,0.595));+#9010 = VERTEX_POINT('',#9011);+#9011 = CARTESIAN_POINT('',(2.35,-1.125,0.595));+#9012 = SURFACE_CURVE('',#9013,(#9017,#9029),.PCURVE_S1.);+#9013 = LINE('',#9014,#9015);+#9014 = CARTESIAN_POINT('',(2.15,-1.125,0.595));+#9015 = VECTOR('',#9016,1.);+#9016 = DIRECTION('',(1.,0.,0.));+#9017 = PCURVE('',#9018,#9023);+#9018 = PLANE('',#9019);+#9019 = AXIS2_PLACEMENT_3D('',#9020,#9021,#9022);+#9020 = CARTESIAN_POINT('',(2.15,-0.975,0.595));+#9021 = DIRECTION('',(0.,0.,1.));+#9022 = DIRECTION('',(1.,0.,0.));+#9023 = DEFINITIONAL_REPRESENTATION('',(#9024),#9028);+#9024 = LINE('',#9025,#9026);+#9025 = CARTESIAN_POINT('',(0.,-0.15));+#9026 = VECTOR('',#9027,1.);+#9027 = DIRECTION('',(1.,0.));+#9028 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9029 = PCURVE('',#9030,#9035);+#9030 = PLANE('',#9031);+#9031 = AXIS2_PLACEMENT_3D('',#9032,#9033,#9034);+#9032 = CARTESIAN_POINT('',(2.634182274245,-1.125,0.217942023204));+#9033 = DIRECTION('',(0.,1.,0.));+#9034 = DIRECTION('',(0.,0.,1.));+#9035 = DEFINITIONAL_REPRESENTATION('',(#9036),#9040);+#9036 = LINE('',#9037,#9038);+#9037 = CARTESIAN_POINT('',(0.377057976796,-0.484182274245));+#9038 = VECTOR('',#9039,1.);+#9039 = DIRECTION('',(0.,1.));+#9040 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9041 = ORIENTED_EDGE('',*,*,#9042,.T.);+#9042 = EDGE_CURVE('',#9010,#9043,#9045,.T.);+#9043 = VERTEX_POINT('',#9044);+#9044 = CARTESIAN_POINT('',(2.35,-0.825,0.595));+#9045 = SURFACE_CURVE('',#9046,(#9050,#9057),.PCURVE_S1.);+#9046 = LINE('',#9047,#9048);+#9047 = CARTESIAN_POINT('',(2.35,-1.125,0.595));+#9048 = VECTOR('',#9049,1.);+#9049 = DIRECTION('',(0.,1.,0.));+#9050 = PCURVE('',#9018,#9051);+#9051 = DEFINITIONAL_REPRESENTATION('',(#9052),#9056);+#9052 = LINE('',#9053,#9054);+#9053 = CARTESIAN_POINT('',(0.2,-0.15));+#9054 = VECTOR('',#9055,1.);+#9055 = DIRECTION('',(0.,1.));+#9056 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9057 = PCURVE('',#9058,#9063);+#9058 = PLANE('',#9059);+#9059 = AXIS2_PLACEMENT_3D('',#9060,#9061,#9062);+#9060 = CARTESIAN_POINT('',(2.35,-0.975,0.595));+#9061 = DIRECTION('',(0.839949759337,0.,0.542664170358));+#9062 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#9063 = DEFINITIONAL_REPRESENTATION('',(#9064),#9068);+#9064 = LINE('',#9065,#9066);+#9065 = CARTESIAN_POINT('',(0.,-0.15));+#9066 = VECTOR('',#9067,1.);+#9067 = DIRECTION('',(0.,1.));+#9068 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9069 = ORIENTED_EDGE('',*,*,#9070,.F.);+#9070 = EDGE_CURVE('',#9071,#9043,#9073,.T.);+#9071 = VERTEX_POINT('',#9072);+#9072 = CARTESIAN_POINT('',(2.15,-0.825,0.595));+#9073 = SURFACE_CURVE('',#9074,(#9078,#9085),.PCURVE_S1.);+#9074 = LINE('',#9075,#9076);+#9075 = CARTESIAN_POINT('',(2.15,-0.825,0.595));+#9076 = VECTOR('',#9077,1.);+#9077 = DIRECTION('',(1.,0.,0.));+#9078 = PCURVE('',#9018,#9079);+#9079 = DEFINITIONAL_REPRESENTATION('',(#9080),#9084);+#9080 = LINE('',#9081,#9082);+#9081 = CARTESIAN_POINT('',(0.,0.15));+#9082 = VECTOR('',#9083,1.);+#9083 = DIRECTION('',(1.,0.));+#9084 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9085 = PCURVE('',#9086,#9091);+#9086 = PLANE('',#9087);+#9087 = AXIS2_PLACEMENT_3D('',#9088,#9089,#9090);+#9088 = CARTESIAN_POINT('',(2.634182274245,-0.825,0.217942023204));+#9089 = DIRECTION('',(0.,1.,0.));+#9090 = DIRECTION('',(0.,0.,1.));+#9091 = DEFINITIONAL_REPRESENTATION('',(#9092),#9096);+#9092 = LINE('',#9093,#9094);+#9093 = CARTESIAN_POINT('',(0.377057976796,-0.484182274245));+#9094 = VECTOR('',#9095,1.);+#9095 = DIRECTION('',(0.,1.));+#9096 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9097 = ORIENTED_EDGE('',*,*,#9098,.T.);+#9098 = EDGE_CURVE('',#9071,#9008,#9099,.T.);+#9099 = SURFACE_CURVE('',#9100,(#9104,#9111),.PCURVE_S1.);+#9100 = LINE('',#9101,#9102);+#9101 = CARTESIAN_POINT('',(2.15,-0.825,0.595));+#9102 = VECTOR('',#9103,1.);+#9103 = DIRECTION('',(0.,-1.,0.));+#9104 = PCURVE('',#9018,#9105);+#9105 = DEFINITIONAL_REPRESENTATION('',(#9106),#9110);+#9106 = LINE('',#9107,#9108);+#9107 = CARTESIAN_POINT('',(0.,0.15));+#9108 = VECTOR('',#9109,1.);+#9109 = DIRECTION('',(0.,-1.));+#9110 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9111 = PCURVE('',#9112,#9117);+#9112 = PLANE('',#9113);+#9113 = AXIS2_PLACEMENT_3D('',#9114,#9115,#9116);+#9114 = CARTESIAN_POINT('',(2.15,-0.975,0.445));+#9115 = DIRECTION('',(-1.,0.,0.));+#9116 = DIRECTION('',(0.,0.,1.));+#9117 = DEFINITIONAL_REPRESENTATION('',(#9118),#9122);+#9118 = LINE('',#9119,#9120);+#9119 = CARTESIAN_POINT('',(0.15,0.15));+#9120 = VECTOR('',#9121,1.);+#9121 = DIRECTION('',(0.,-1.));+#9122 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9123 = ADVANCED_FACE('',(#9124),#9112,.T.);+#9124 = FACE_BOUND('',#9125,.T.);+#9125 = EDGE_LOOP('',(#9126,#9149,#9150,#9173));+#9126 = ORIENTED_EDGE('',*,*,#9127,.T.);+#9127 = EDGE_CURVE('',#9128,#9008,#9130,.T.);+#9128 = VERTEX_POINT('',#9129);+#9129 = CARTESIAN_POINT('',(2.15,-1.125,0.445));+#9130 = SURFACE_CURVE('',#9131,(#9135,#9142),.PCURVE_S1.);+#9131 = LINE('',#9132,#9133);+#9132 = CARTESIAN_POINT('',(2.15,-1.125,0.445));+#9133 = VECTOR('',#9134,1.);+#9134 = DIRECTION('',(0.,0.,1.));+#9135 = PCURVE('',#9112,#9136);+#9136 = DEFINITIONAL_REPRESENTATION('',(#9137),#9141);+#9137 = LINE('',#9138,#9139);+#9138 = CARTESIAN_POINT('',(0.,-0.15));+#9139 = VECTOR('',#9140,1.);+#9140 = DIRECTION('',(1.,0.));+#9141 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9142 = PCURVE('',#9030,#9143);+#9143 = DEFINITIONAL_REPRESENTATION('',(#9144),#9148);+#9144 = LINE('',#9145,#9146);+#9145 = CARTESIAN_POINT('',(0.227057976796,-0.484182274245));+#9146 = VECTOR('',#9147,1.);+#9147 = DIRECTION('',(1.,0.));+#9148 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9149 = ORIENTED_EDGE('',*,*,#9098,.F.);+#9150 = ORIENTED_EDGE('',*,*,#9151,.F.);+#9151 = EDGE_CURVE('',#9152,#9071,#9154,.T.);+#9152 = VERTEX_POINT('',#9153);+#9153 = CARTESIAN_POINT('',(2.15,-0.825,0.445));+#9154 = SURFACE_CURVE('',#9155,(#9159,#9166),.PCURVE_S1.);+#9155 = LINE('',#9156,#9157);+#9156 = CARTESIAN_POINT('',(2.15,-0.825,0.445));+#9157 = VECTOR('',#9158,1.);+#9158 = DIRECTION('',(0.,0.,1.));+#9159 = PCURVE('',#9112,#9160);+#9160 = DEFINITIONAL_REPRESENTATION('',(#9161),#9165);+#9161 = LINE('',#9162,#9163);+#9162 = CARTESIAN_POINT('',(0.,0.15));+#9163 = VECTOR('',#9164,1.);+#9164 = DIRECTION('',(1.,0.));+#9165 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9166 = PCURVE('',#9086,#9167);+#9167 = DEFINITIONAL_REPRESENTATION('',(#9168),#9172);+#9168 = LINE('',#9169,#9170);+#9169 = CARTESIAN_POINT('',(0.227057976796,-0.484182274245));+#9170 = VECTOR('',#9171,1.);+#9171 = DIRECTION('',(1.,0.));+#9172 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9173 = ORIENTED_EDGE('',*,*,#9174,.T.);+#9174 = EDGE_CURVE('',#9152,#9128,#9175,.T.);+#9175 = SURFACE_CURVE('',#9176,(#9180,#9187),.PCURVE_S1.);+#9176 = LINE('',#9177,#9178);+#9177 = CARTESIAN_POINT('',(2.15,-0.825,0.445));+#9178 = VECTOR('',#9179,1.);+#9179 = DIRECTION('',(0.,-1.,0.));+#9180 = PCURVE('',#9112,#9181);+#9181 = DEFINITIONAL_REPRESENTATION('',(#9182),#9186);+#9182 = LINE('',#9183,#9184);+#9183 = CARTESIAN_POINT('',(0.,0.15));+#9184 = VECTOR('',#9185,1.);+#9185 = DIRECTION('',(0.,-1.));+#9186 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9187 = PCURVE('',#9188,#9193);+#9188 = PLANE('',#9189);+#9189 = AXIS2_PLACEMENT_3D('',#9190,#9191,#9192);+#9190 = CARTESIAN_POINT('',(2.2,-0.975,0.445));+#9191 = DIRECTION('',(-0.,-0.,-1.));+#9192 = DIRECTION('',(-1.,0.,0.));+#9193 = DEFINITIONAL_REPRESENTATION('',(#9194),#9198);+#9194 = LINE('',#9195,#9196);+#9195 = CARTESIAN_POINT('',(5.E-02,0.15));+#9196 = VECTOR('',#9197,1.);+#9197 = DIRECTION('',(0.,-1.));+#9198 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9199 = ADVANCED_FACE('',(#9200),#9188,.T.);+#9200 = FACE_BOUND('',#9201,.T.);+#9201 = EDGE_LOOP('',(#9202,#9225,#9226,#9249));+#9202 = ORIENTED_EDGE('',*,*,#9203,.T.);+#9203 = EDGE_CURVE('',#9204,#9128,#9206,.T.);+#9204 = VERTEX_POINT('',#9205);+#9205 = CARTESIAN_POINT('',(2.2,-1.125,0.445));+#9206 = SURFACE_CURVE('',#9207,(#9211,#9218),.PCURVE_S1.);+#9207 = LINE('',#9208,#9209);+#9208 = CARTESIAN_POINT('',(2.2,-1.125,0.445));+#9209 = VECTOR('',#9210,1.);+#9210 = DIRECTION('',(-1.,0.,0.));+#9211 = PCURVE('',#9188,#9212);+#9212 = DEFINITIONAL_REPRESENTATION('',(#9213),#9217);+#9213 = LINE('',#9214,#9215);+#9214 = CARTESIAN_POINT('',(0.,-0.15));+#9215 = VECTOR('',#9216,1.);+#9216 = DIRECTION('',(1.,0.));+#9217 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9218 = PCURVE('',#9030,#9219);+#9219 = DEFINITIONAL_REPRESENTATION('',(#9220),#9224);+#9220 = LINE('',#9221,#9222);+#9221 = CARTESIAN_POINT('',(0.227057976796,-0.434182274245));+#9222 = VECTOR('',#9223,1.);+#9223 = DIRECTION('',(0.,-1.));+#9224 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9225 = ORIENTED_EDGE('',*,*,#9174,.F.);+#9226 = ORIENTED_EDGE('',*,*,#9227,.F.);+#9227 = EDGE_CURVE('',#9228,#9152,#9230,.T.);+#9228 = VERTEX_POINT('',#9229);+#9229 = CARTESIAN_POINT('',(2.2,-0.825,0.445));+#9230 = SURFACE_CURVE('',#9231,(#9235,#9242),.PCURVE_S1.);+#9231 = LINE('',#9232,#9233);+#9232 = CARTESIAN_POINT('',(2.2,-0.825,0.445));+#9233 = VECTOR('',#9234,1.);+#9234 = DIRECTION('',(-1.,0.,0.));+#9235 = PCURVE('',#9188,#9236);+#9236 = DEFINITIONAL_REPRESENTATION('',(#9237),#9241);+#9237 = LINE('',#9238,#9239);+#9238 = CARTESIAN_POINT('',(0.,0.15));+#9239 = VECTOR('',#9240,1.);+#9240 = DIRECTION('',(1.,0.));+#9241 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9242 = PCURVE('',#9086,#9243);+#9243 = DEFINITIONAL_REPRESENTATION('',(#9244),#9248);+#9244 = LINE('',#9245,#9246);+#9245 = CARTESIAN_POINT('',(0.227057976796,-0.434182274245));+#9246 = VECTOR('',#9247,1.);+#9247 = DIRECTION('',(0.,-1.));+#9248 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9249 = ORIENTED_EDGE('',*,*,#9250,.T.);+#9250 = EDGE_CURVE('',#9228,#9204,#9251,.T.);+#9251 = SURFACE_CURVE('',#9252,(#9256,#9263),.PCURVE_S1.);+#9252 = LINE('',#9253,#9254);+#9253 = CARTESIAN_POINT('',(2.2,-0.825,0.445));+#9254 = VECTOR('',#9255,1.);+#9255 = DIRECTION('',(0.,-1.,0.));+#9256 = PCURVE('',#9188,#9257);+#9257 = DEFINITIONAL_REPRESENTATION('',(#9258),#9262);+#9258 = LINE('',#9259,#9260);+#9259 = CARTESIAN_POINT('',(0.,0.15));+#9260 = VECTOR('',#9261,1.);+#9261 = DIRECTION('',(0.,-1.));+#9262 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9263 = PCURVE('',#9264,#9269);+#9264 = PLANE('',#9265);+#9265 = AXIS2_PLACEMENT_3D('',#9266,#9267,#9268);+#9266 = CARTESIAN_POINT('',(2.4875,-0.975,0.));+#9267 = DIRECTION('',(-0.839949759337,-0.,-0.542664170358));+#9268 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#9269 = DEFINITIONAL_REPRESENTATION('',(#9270),#9274);+#9270 = LINE('',#9271,#9272);+#9271 = CARTESIAN_POINT('',(0.529793591883,0.15));+#9272 = VECTOR('',#9273,1.);+#9273 = DIRECTION('',(0.,-1.));+#9274 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9275 = ADVANCED_FACE('',(#9276),#9264,.T.);+#9276 = FACE_BOUND('',#9277,.T.);+#9277 = EDGE_LOOP('',(#9278,#9308,#9329,#9330));+#9278 = ORIENTED_EDGE('',*,*,#9279,.F.);+#9279 = EDGE_CURVE('',#9280,#9282,#9284,.T.);+#9280 = VERTEX_POINT('',#9281);+#9281 = CARTESIAN_POINT('',(2.4875,-1.125,0.));+#9282 = VERTEX_POINT('',#9283);+#9283 = CARTESIAN_POINT('',(2.4875,-0.825,0.));+#9284 = SURFACE_CURVE('',#9285,(#9289,#9296),.PCURVE_S1.);+#9285 = LINE('',#9286,#9287);+#9286 = CARTESIAN_POINT('',(2.4875,-1.125,0.));+#9287 = VECTOR('',#9288,1.);+#9288 = DIRECTION('',(0.,1.,0.));+#9289 = PCURVE('',#9264,#9290);+#9290 = DEFINITIONAL_REPRESENTATION('',(#9291),#9295);+#9291 = LINE('',#9292,#9293);+#9292 = CARTESIAN_POINT('',(0.,-0.15));+#9293 = VECTOR('',#9294,1.);+#9294 = DIRECTION('',(0.,1.));+#9295 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9296 = PCURVE('',#9297,#9302);+#9297 = PLANE('',#9298);+#9298 = AXIS2_PLACEMENT_3D('',#9299,#9300,#9301);+#9299 = CARTESIAN_POINT('',(3.205,-0.975,0.));+#9300 = DIRECTION('',(-0.,-0.,-1.));+#9301 = DIRECTION('',(-1.,0.,0.));+#9302 = DEFINITIONAL_REPRESENTATION('',(#9303),#9307);+#9303 = LINE('',#9304,#9305);+#9304 = CARTESIAN_POINT('',(0.7175,-0.15));+#9305 = VECTOR('',#9306,1.);+#9306 = DIRECTION('',(0.,1.));+#9307 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9308 = ORIENTED_EDGE('',*,*,#9309,.T.);+#9309 = EDGE_CURVE('',#9280,#9204,#9310,.T.);+#9310 = SURFACE_CURVE('',#9311,(#9315,#9322),.PCURVE_S1.);+#9311 = LINE('',#9312,#9313);+#9312 = CARTESIAN_POINT('',(2.4875,-1.125,0.));+#9313 = VECTOR('',#9314,1.);+#9314 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#9315 = PCURVE('',#9264,#9316);+#9316 = DEFINITIONAL_REPRESENTATION('',(#9317),#9321);+#9317 = LINE('',#9318,#9319);+#9318 = CARTESIAN_POINT('',(0.,-0.15));+#9319 = VECTOR('',#9320,1.);+#9320 = DIRECTION('',(1.,0.));+#9321 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9322 = PCURVE('',#9030,#9323);+#9323 = DEFINITIONAL_REPRESENTATION('',(#9324),#9328);+#9324 = LINE('',#9325,#9326);+#9325 = CARTESIAN_POINT('',(-0.217942023204,-0.146682274245));+#9326 = VECTOR('',#9327,1.);+#9327 = DIRECTION('',(0.839949759337,-0.542664170358));+#9328 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9329 = ORIENTED_EDGE('',*,*,#9250,.F.);+#9330 = ORIENTED_EDGE('',*,*,#9331,.F.);+#9331 = EDGE_CURVE('',#9282,#9228,#9332,.T.);+#9332 = SURFACE_CURVE('',#9333,(#9337,#9344),.PCURVE_S1.);+#9333 = LINE('',#9334,#9335);+#9334 = CARTESIAN_POINT('',(2.4875,-0.825,0.));+#9335 = VECTOR('',#9336,1.);+#9336 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#9337 = PCURVE('',#9264,#9338);+#9338 = DEFINITIONAL_REPRESENTATION('',(#9339),#9343);+#9339 = LINE('',#9340,#9341);+#9340 = CARTESIAN_POINT('',(0.,0.15));+#9341 = VECTOR('',#9342,1.);+#9342 = DIRECTION('',(1.,0.));+#9343 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9344 = PCURVE('',#9086,#9345);+#9345 = DEFINITIONAL_REPRESENTATION('',(#9346),#9350);+#9346 = LINE('',#9347,#9348);+#9347 = CARTESIAN_POINT('',(-0.217942023204,-0.146682274245));+#9348 = VECTOR('',#9349,1.);+#9349 = DIRECTION('',(0.839949759337,-0.542664170358));+#9350 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9351 = ADVANCED_FACE('',(#9352),#9297,.T.);+#9352 = FACE_BOUND('',#9353,.T.);+#9353 = EDGE_LOOP('',(#9354,#9384,#9405,#9406));+#9354 = ORIENTED_EDGE('',*,*,#9355,.F.);+#9355 = EDGE_CURVE('',#9356,#9358,#9360,.T.);+#9356 = VERTEX_POINT('',#9357);+#9357 = CARTESIAN_POINT('',(3.205,-1.125,0.));+#9358 = VERTEX_POINT('',#9359);+#9359 = CARTESIAN_POINT('',(3.205,-0.825,0.));+#9360 = SURFACE_CURVE('',#9361,(#9365,#9372),.PCURVE_S1.);+#9361 = LINE('',#9362,#9363);+#9362 = CARTESIAN_POINT('',(3.205,-1.125,0.));+#9363 = VECTOR('',#9364,1.);+#9364 = DIRECTION('',(0.,1.,0.));+#9365 = PCURVE('',#9297,#9366);+#9366 = DEFINITIONAL_REPRESENTATION('',(#9367),#9371);+#9367 = LINE('',#9368,#9369);+#9368 = CARTESIAN_POINT('',(0.,-0.15));+#9369 = VECTOR('',#9370,1.);+#9370 = DIRECTION('',(0.,1.));+#9371 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9372 = PCURVE('',#9373,#9378);+#9373 = PLANE('',#9374);+#9374 = AXIS2_PLACEMENT_3D('',#9375,#9376,#9377);+#9375 = CARTESIAN_POINT('',(3.205,-0.975,0.15));+#9376 = DIRECTION('',(1.,0.,0.));+#9377 = DIRECTION('',(0.,0.,-1.));+#9378 = DEFINITIONAL_REPRESENTATION('',(#9379),#9383);+#9379 = LINE('',#9380,#9381);+#9380 = CARTESIAN_POINT('',(0.15,-0.15));+#9381 = VECTOR('',#9382,1.);+#9382 = DIRECTION('',(0.,1.));+#9383 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9384 = ORIENTED_EDGE('',*,*,#9385,.T.);+#9385 = EDGE_CURVE('',#9356,#9280,#9386,.T.);+#9386 = SURFACE_CURVE('',#9387,(#9391,#9398),.PCURVE_S1.);+#9387 = LINE('',#9388,#9389);+#9388 = CARTESIAN_POINT('',(3.205,-1.125,0.));+#9389 = VECTOR('',#9390,1.);+#9390 = DIRECTION('',(-1.,0.,0.));+#9391 = PCURVE('',#9297,#9392);+#9392 = DEFINITIONAL_REPRESENTATION('',(#9393),#9397);+#9393 = LINE('',#9394,#9395);+#9394 = CARTESIAN_POINT('',(0.,-0.15));+#9395 = VECTOR('',#9396,1.);+#9396 = DIRECTION('',(1.,0.));+#9397 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9398 = PCURVE('',#9030,#9399);+#9399 = DEFINITIONAL_REPRESENTATION('',(#9400),#9404);+#9400 = LINE('',#9401,#9402);+#9401 = CARTESIAN_POINT('',(-0.217942023204,0.570817725755));+#9402 = VECTOR('',#9403,1.);+#9403 = DIRECTION('',(0.,-1.));+#9404 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9405 = ORIENTED_EDGE('',*,*,#9279,.T.);+#9406 = ORIENTED_EDGE('',*,*,#9407,.F.);+#9407 = EDGE_CURVE('',#9358,#9282,#9408,.T.);+#9408 = SURFACE_CURVE('',#9409,(#9413,#9420),.PCURVE_S1.);+#9409 = LINE('',#9410,#9411);+#9410 = CARTESIAN_POINT('',(3.205,-0.825,0.));+#9411 = VECTOR('',#9412,1.);+#9412 = DIRECTION('',(-1.,0.,0.));+#9413 = PCURVE('',#9297,#9414);+#9414 = DEFINITIONAL_REPRESENTATION('',(#9415),#9419);+#9415 = LINE('',#9416,#9417);+#9416 = CARTESIAN_POINT('',(0.,0.15));+#9417 = VECTOR('',#9418,1.);+#9418 = DIRECTION('',(1.,0.));+#9419 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9420 = PCURVE('',#9086,#9421);+#9421 = DEFINITIONAL_REPRESENTATION('',(#9422),#9426);+#9422 = LINE('',#9423,#9424);+#9423 = CARTESIAN_POINT('',(-0.217942023204,0.570817725755));+#9424 = VECTOR('',#9425,1.);+#9425 = DIRECTION('',(0.,-1.));+#9426 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9427 = ADVANCED_FACE('',(#9428),#9373,.T.);+#9428 = FACE_BOUND('',#9429,.T.);+#9429 = EDGE_LOOP('',(#9430,#9460,#9481,#9482));+#9430 = ORIENTED_EDGE('',*,*,#9431,.F.);+#9431 = EDGE_CURVE('',#9432,#9434,#9436,.T.);+#9432 = VERTEX_POINT('',#9433);+#9433 = CARTESIAN_POINT('',(3.205,-1.125,0.15));+#9434 = VERTEX_POINT('',#9435);+#9435 = CARTESIAN_POINT('',(3.205,-0.825,0.15));+#9436 = SURFACE_CURVE('',#9437,(#9441,#9448),.PCURVE_S1.);+#9437 = LINE('',#9438,#9439);+#9438 = CARTESIAN_POINT('',(3.205,-1.125,0.15));+#9439 = VECTOR('',#9440,1.);+#9440 = DIRECTION('',(0.,1.,0.));+#9441 = PCURVE('',#9373,#9442);+#9442 = DEFINITIONAL_REPRESENTATION('',(#9443),#9447);+#9443 = LINE('',#9444,#9445);+#9444 = CARTESIAN_POINT('',(0.,-0.15));+#9445 = VECTOR('',#9446,1.);+#9446 = DIRECTION('',(0.,1.));+#9447 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9448 = PCURVE('',#9449,#9454);+#9449 = PLANE('',#9450);+#9450 = AXIS2_PLACEMENT_3D('',#9451,#9452,#9453);+#9451 = CARTESIAN_POINT('',(2.6375,-0.975,0.15));+#9452 = DIRECTION('',(0.,0.,1.));+#9453 = DIRECTION('',(1.,0.,0.));+#9454 = DEFINITIONAL_REPRESENTATION('',(#9455),#9459);+#9455 = LINE('',#9456,#9457);+#9456 = CARTESIAN_POINT('',(0.5675,-0.15));+#9457 = VECTOR('',#9458,1.);+#9458 = DIRECTION('',(0.,1.));+#9459 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9460 = ORIENTED_EDGE('',*,*,#9461,.T.);+#9461 = EDGE_CURVE('',#9432,#9356,#9462,.T.);+#9462 = SURFACE_CURVE('',#9463,(#9467,#9474),.PCURVE_S1.);+#9463 = LINE('',#9464,#9465);+#9464 = CARTESIAN_POINT('',(3.205,-1.125,0.15));+#9465 = VECTOR('',#9466,1.);+#9466 = DIRECTION('',(0.,0.,-1.));+#9467 = PCURVE('',#9373,#9468);+#9468 = DEFINITIONAL_REPRESENTATION('',(#9469),#9473);+#9469 = LINE('',#9470,#9471);+#9470 = CARTESIAN_POINT('',(0.,-0.15));+#9471 = VECTOR('',#9472,1.);+#9472 = DIRECTION('',(1.,0.));+#9473 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9474 = PCURVE('',#9030,#9475);+#9475 = DEFINITIONAL_REPRESENTATION('',(#9476),#9480);+#9476 = LINE('',#9477,#9478);+#9477 = CARTESIAN_POINT('',(-6.7942023204E-02,0.570817725755));+#9478 = VECTOR('',#9479,1.);+#9479 = DIRECTION('',(-1.,0.));+#9480 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9481 = ORIENTED_EDGE('',*,*,#9355,.T.);+#9482 = ORIENTED_EDGE('',*,*,#9483,.F.);+#9483 = EDGE_CURVE('',#9434,#9358,#9484,.T.);+#9484 = SURFACE_CURVE('',#9485,(#9489,#9496),.PCURVE_S1.);+#9485 = LINE('',#9486,#9487);+#9486 = CARTESIAN_POINT('',(3.205,-0.825,0.15));+#9487 = VECTOR('',#9488,1.);+#9488 = DIRECTION('',(0.,0.,-1.));+#9489 = PCURVE('',#9373,#9490);+#9490 = DEFINITIONAL_REPRESENTATION('',(#9491),#9495);+#9491 = LINE('',#9492,#9493);+#9492 = CARTESIAN_POINT('',(0.,0.15));+#9493 = VECTOR('',#9494,1.);+#9494 = DIRECTION('',(1.,0.));+#9495 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9496 = PCURVE('',#9086,#9497);+#9497 = DEFINITIONAL_REPRESENTATION('',(#9498),#9502);+#9498 = LINE('',#9499,#9500);+#9499 = CARTESIAN_POINT('',(-6.7942023204E-02,0.570817725755));+#9500 = VECTOR('',#9501,1.);+#9501 = DIRECTION('',(-1.,0.));+#9502 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9503 = ADVANCED_FACE('',(#9504),#9449,.T.);+#9504 = FACE_BOUND('',#9505,.T.);+#9505 = EDGE_LOOP('',(#9506,#9531,#9552,#9553));+#9506 = ORIENTED_EDGE('',*,*,#9507,.F.);+#9507 = EDGE_CURVE('',#9508,#9510,#9512,.T.);+#9508 = VERTEX_POINT('',#9509);+#9509 = CARTESIAN_POINT('',(2.6375,-1.125,0.15));+#9510 = VERTEX_POINT('',#9511);+#9511 = CARTESIAN_POINT('',(2.6375,-0.825,0.15));+#9512 = SURFACE_CURVE('',#9513,(#9517,#9524),.PCURVE_S1.);+#9513 = LINE('',#9514,#9515);+#9514 = CARTESIAN_POINT('',(2.6375,-1.125,0.15));+#9515 = VECTOR('',#9516,1.);+#9516 = DIRECTION('',(0.,1.,0.));+#9517 = PCURVE('',#9449,#9518);+#9518 = DEFINITIONAL_REPRESENTATION('',(#9519),#9523);+#9519 = LINE('',#9520,#9521);+#9520 = CARTESIAN_POINT('',(0.,-0.15));+#9521 = VECTOR('',#9522,1.);+#9522 = DIRECTION('',(0.,1.));+#9523 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9524 = PCURVE('',#9058,#9525);+#9525 = DEFINITIONAL_REPRESENTATION('',(#9526),#9530);+#9526 = LINE('',#9527,#9528);+#9527 = CARTESIAN_POINT('',(0.529793591883,-0.15));+#9528 = VECTOR('',#9529,1.);+#9529 = DIRECTION('',(0.,1.));+#9530 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9531 = ORIENTED_EDGE('',*,*,#9532,.T.);+#9532 = EDGE_CURVE('',#9508,#9432,#9533,.T.);+#9533 = SURFACE_CURVE('',#9534,(#9538,#9545),.PCURVE_S1.);+#9534 = LINE('',#9535,#9536);+#9535 = CARTESIAN_POINT('',(2.6375,-1.125,0.15));+#9536 = VECTOR('',#9537,1.);+#9537 = DIRECTION('',(1.,0.,0.));+#9538 = PCURVE('',#9449,#9539);+#9539 = DEFINITIONAL_REPRESENTATION('',(#9540),#9544);+#9540 = LINE('',#9541,#9542);+#9541 = CARTESIAN_POINT('',(0.,-0.15));+#9542 = VECTOR('',#9543,1.);+#9543 = DIRECTION('',(1.,0.));+#9544 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9545 = PCURVE('',#9030,#9546);+#9546 = DEFINITIONAL_REPRESENTATION('',(#9547),#9551);+#9547 = LINE('',#9548,#9549);+#9548 = CARTESIAN_POINT('',(-6.7942023204E-02,3.317725755E-03));+#9549 = VECTOR('',#9550,1.);+#9550 = DIRECTION('',(0.,1.));+#9551 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9552 = ORIENTED_EDGE('',*,*,#9431,.T.);+#9553 = ORIENTED_EDGE('',*,*,#9554,.F.);+#9554 = EDGE_CURVE('',#9510,#9434,#9555,.T.);+#9555 = SURFACE_CURVE('',#9556,(#9560,#9567),.PCURVE_S1.);+#9556 = LINE('',#9557,#9558);+#9557 = CARTESIAN_POINT('',(2.6375,-0.825,0.15));+#9558 = VECTOR('',#9559,1.);+#9559 = DIRECTION('',(1.,0.,0.));+#9560 = PCURVE('',#9449,#9561);+#9561 = DEFINITIONAL_REPRESENTATION('',(#9562),#9566);+#9562 = LINE('',#9563,#9564);+#9563 = CARTESIAN_POINT('',(0.,0.15));+#9564 = VECTOR('',#9565,1.);+#9565 = DIRECTION('',(1.,0.));+#9566 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9567 = PCURVE('',#9086,#9568);+#9568 = DEFINITIONAL_REPRESENTATION('',(#9569),#9573);+#9569 = LINE('',#9570,#9571);+#9570 = CARTESIAN_POINT('',(-6.7942023204E-02,3.317725755E-03));+#9571 = VECTOR('',#9572,1.);+#9572 = DIRECTION('',(0.,1.));+#9573 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9574 = ADVANCED_FACE('',(#9575),#9086,.T.);+#9575 = FACE_BOUND('',#9576,.T.);+#9576 = EDGE_LOOP('',(#9577,#9578,#9599,#9600,#9601,#9602,#9603,#9604));+#9577 = ORIENTED_EDGE('',*,*,#9070,.T.);+#9578 = ORIENTED_EDGE('',*,*,#9579,.T.);+#9579 = EDGE_CURVE('',#9043,#9510,#9580,.T.);+#9580 = SURFACE_CURVE('',#9581,(#9585,#9592),.PCURVE_S1.);+#9581 = LINE('',#9582,#9583);+#9582 = CARTESIAN_POINT('',(2.35,-0.825,0.595));+#9583 = VECTOR('',#9584,1.);+#9584 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#9585 = PCURVE('',#9086,#9586);+#9586 = DEFINITIONAL_REPRESENTATION('',(#9587),#9591);+#9587 = LINE('',#9588,#9589);+#9588 = CARTESIAN_POINT('',(0.377057976796,-0.284182274245));+#9589 = VECTOR('',#9590,1.);+#9590 = DIRECTION('',(-0.839949759337,0.542664170358));+#9591 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9592 = PCURVE('',#9058,#9593);+#9593 = DEFINITIONAL_REPRESENTATION('',(#9594),#9598);+#9594 = LINE('',#9595,#9596);+#9595 = CARTESIAN_POINT('',(0.,0.15));+#9596 = VECTOR('',#9597,1.);+#9597 = DIRECTION('',(1.,0.));+#9598 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9599 = ORIENTED_EDGE('',*,*,#9554,.T.);+#9600 = ORIENTED_EDGE('',*,*,#9483,.T.);+#9601 = ORIENTED_EDGE('',*,*,#9407,.T.);+#9602 = ORIENTED_EDGE('',*,*,#9331,.T.);+#9603 = ORIENTED_EDGE('',*,*,#9227,.T.);+#9604 = ORIENTED_EDGE('',*,*,#9151,.T.);+#9605 = ADVANCED_FACE('',(#9606),#9058,.T.);+#9606 = FACE_BOUND('',#9607,.T.);+#9607 = EDGE_LOOP('',(#9608,#9609,#9630,#9631));+#9608 = ORIENTED_EDGE('',*,*,#9042,.F.);+#9609 = ORIENTED_EDGE('',*,*,#9610,.T.);+#9610 = EDGE_CURVE('',#9010,#9508,#9611,.T.);+#9611 = SURFACE_CURVE('',#9612,(#9616,#9623),.PCURVE_S1.);+#9612 = LINE('',#9613,#9614);+#9613 = CARTESIAN_POINT('',(2.35,-1.125,0.595));+#9614 = VECTOR('',#9615,1.);+#9615 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#9616 = PCURVE('',#9058,#9617);+#9617 = DEFINITIONAL_REPRESENTATION('',(#9618),#9622);+#9618 = LINE('',#9619,#9620);+#9619 = CARTESIAN_POINT('',(0.,-0.15));+#9620 = VECTOR('',#9621,1.);+#9621 = DIRECTION('',(1.,0.));+#9622 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9623 = PCURVE('',#9030,#9624);+#9624 = DEFINITIONAL_REPRESENTATION('',(#9625),#9629);+#9625 = LINE('',#9626,#9627);+#9626 = CARTESIAN_POINT('',(0.377057976796,-0.284182274245));+#9627 = VECTOR('',#9628,1.);+#9628 = DIRECTION('',(-0.839949759337,0.542664170358));+#9629 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9630 = ORIENTED_EDGE('',*,*,#9507,.T.);+#9631 = ORIENTED_EDGE('',*,*,#9579,.F.);+#9632 = ADVANCED_FACE('',(#9633),#9030,.F.);+#9633 = FACE_BOUND('',#9634,.F.);+#9634 = EDGE_LOOP('',(#9635,#9636,#9637,#9638,#9639,#9640,#9641,#9642));+#9635 = ORIENTED_EDGE('',*,*,#9007,.T.);+#9636 = ORIENTED_EDGE('',*,*,#9610,.T.);+#9637 = ORIENTED_EDGE('',*,*,#9532,.T.);+#9638 = ORIENTED_EDGE('',*,*,#9461,.T.);+#9639 = ORIENTED_EDGE('',*,*,#9385,.T.);+#9640 = ORIENTED_EDGE('',*,*,#9309,.T.);+#9641 = ORIENTED_EDGE('',*,*,#9203,.T.);+#9642 = ORIENTED_EDGE('',*,*,#9127,.T.);+#9643 = MANIFOLD_SOLID_BREP('',#9644);+#9644 = CLOSED_SHELL('',(#9645,#9765,#9841,#9917,#9993,#10069,#10145,+ #10216,#10247,#10274));+#9645 = ADVANCED_FACE('',(#9646),#9660,.T.);+#9646 = FACE_BOUND('',#9647,.T.);+#9647 = EDGE_LOOP('',(#9648,#9683,#9711,#9739));+#9648 = ORIENTED_EDGE('',*,*,#9649,.T.);+#9649 = EDGE_CURVE('',#9650,#9652,#9654,.T.);+#9650 = VERTEX_POINT('',#9651);+#9651 = CARTESIAN_POINT('',(2.15,-0.475,0.595));+#9652 = VERTEX_POINT('',#9653);+#9653 = CARTESIAN_POINT('',(2.35,-0.475,0.595));+#9654 = SURFACE_CURVE('',#9655,(#9659,#9671),.PCURVE_S1.);+#9655 = LINE('',#9656,#9657);+#9656 = CARTESIAN_POINT('',(2.15,-0.475,0.595));+#9657 = VECTOR('',#9658,1.);+#9658 = DIRECTION('',(1.,0.,0.));+#9659 = PCURVE('',#9660,#9665);+#9660 = PLANE('',#9661);+#9661 = AXIS2_PLACEMENT_3D('',#9662,#9663,#9664);+#9662 = CARTESIAN_POINT('',(2.15,-0.325,0.595));+#9663 = DIRECTION('',(0.,0.,1.));+#9664 = DIRECTION('',(1.,0.,0.));+#9665 = DEFINITIONAL_REPRESENTATION('',(#9666),#9670);+#9666 = LINE('',#9667,#9668);+#9667 = CARTESIAN_POINT('',(0.,-0.15));+#9668 = VECTOR('',#9669,1.);+#9669 = DIRECTION('',(1.,0.));+#9670 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9671 = PCURVE('',#9672,#9677);+#9672 = PLANE('',#9673);+#9673 = AXIS2_PLACEMENT_3D('',#9674,#9675,#9676);+#9674 = CARTESIAN_POINT('',(2.634182274245,-0.475,0.217942023204));+#9675 = DIRECTION('',(0.,1.,0.));+#9676 = DIRECTION('',(0.,0.,1.));+#9677 = DEFINITIONAL_REPRESENTATION('',(#9678),#9682);+#9678 = LINE('',#9679,#9680);+#9679 = CARTESIAN_POINT('',(0.377057976796,-0.484182274245));+#9680 = VECTOR('',#9681,1.);+#9681 = DIRECTION('',(0.,1.));+#9682 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9683 = ORIENTED_EDGE('',*,*,#9684,.T.);+#9684 = EDGE_CURVE('',#9652,#9685,#9687,.T.);+#9685 = VERTEX_POINT('',#9686);+#9686 = CARTESIAN_POINT('',(2.35,-0.175,0.595));+#9687 = SURFACE_CURVE('',#9688,(#9692,#9699),.PCURVE_S1.);+#9688 = LINE('',#9689,#9690);+#9689 = CARTESIAN_POINT('',(2.35,-0.475,0.595));+#9690 = VECTOR('',#9691,1.);+#9691 = DIRECTION('',(0.,1.,0.));+#9692 = PCURVE('',#9660,#9693);+#9693 = DEFINITIONAL_REPRESENTATION('',(#9694),#9698);+#9694 = LINE('',#9695,#9696);+#9695 = CARTESIAN_POINT('',(0.2,-0.15));+#9696 = VECTOR('',#9697,1.);+#9697 = DIRECTION('',(0.,1.));+#9698 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9699 = PCURVE('',#9700,#9705);+#9700 = PLANE('',#9701);+#9701 = AXIS2_PLACEMENT_3D('',#9702,#9703,#9704);+#9702 = CARTESIAN_POINT('',(2.35,-0.325,0.595));+#9703 = DIRECTION('',(0.839949759337,0.,0.542664170358));+#9704 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#9705 = DEFINITIONAL_REPRESENTATION('',(#9706),#9710);+#9706 = LINE('',#9707,#9708);+#9707 = CARTESIAN_POINT('',(0.,-0.15));+#9708 = VECTOR('',#9709,1.);+#9709 = DIRECTION('',(0.,1.));+#9710 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9711 = ORIENTED_EDGE('',*,*,#9712,.F.);+#9712 = EDGE_CURVE('',#9713,#9685,#9715,.T.);+#9713 = VERTEX_POINT('',#9714);+#9714 = CARTESIAN_POINT('',(2.15,-0.175,0.595));+#9715 = SURFACE_CURVE('',#9716,(#9720,#9727),.PCURVE_S1.);+#9716 = LINE('',#9717,#9718);+#9717 = CARTESIAN_POINT('',(2.15,-0.175,0.595));+#9718 = VECTOR('',#9719,1.);+#9719 = DIRECTION('',(1.,0.,0.));+#9720 = PCURVE('',#9660,#9721);+#9721 = DEFINITIONAL_REPRESENTATION('',(#9722),#9726);+#9722 = LINE('',#9723,#9724);+#9723 = CARTESIAN_POINT('',(0.,0.15));+#9724 = VECTOR('',#9725,1.);+#9725 = DIRECTION('',(1.,0.));+#9726 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9727 = PCURVE('',#9728,#9733);+#9728 = PLANE('',#9729);+#9729 = AXIS2_PLACEMENT_3D('',#9730,#9731,#9732);+#9730 = CARTESIAN_POINT('',(2.634182274245,-0.175,0.217942023204));+#9731 = DIRECTION('',(0.,1.,0.));+#9732 = DIRECTION('',(0.,0.,1.));+#9733 = DEFINITIONAL_REPRESENTATION('',(#9734),#9738);+#9734 = LINE('',#9735,#9736);+#9735 = CARTESIAN_POINT('',(0.377057976796,-0.484182274245));+#9736 = VECTOR('',#9737,1.);+#9737 = DIRECTION('',(0.,1.));+#9738 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9739 = ORIENTED_EDGE('',*,*,#9740,.T.);+#9740 = EDGE_CURVE('',#9713,#9650,#9741,.T.);+#9741 = SURFACE_CURVE('',#9742,(#9746,#9753),.PCURVE_S1.);+#9742 = LINE('',#9743,#9744);+#9743 = CARTESIAN_POINT('',(2.15,-0.175,0.595));+#9744 = VECTOR('',#9745,1.);+#9745 = DIRECTION('',(0.,-1.,0.));+#9746 = PCURVE('',#9660,#9747);+#9747 = DEFINITIONAL_REPRESENTATION('',(#9748),#9752);+#9748 = LINE('',#9749,#9750);+#9749 = CARTESIAN_POINT('',(0.,0.15));+#9750 = VECTOR('',#9751,1.);+#9751 = DIRECTION('',(0.,-1.));+#9752 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9753 = PCURVE('',#9754,#9759);+#9754 = PLANE('',#9755);+#9755 = AXIS2_PLACEMENT_3D('',#9756,#9757,#9758);+#9756 = CARTESIAN_POINT('',(2.15,-0.325,0.445));+#9757 = DIRECTION('',(-1.,0.,0.));+#9758 = DIRECTION('',(0.,0.,1.));+#9759 = DEFINITIONAL_REPRESENTATION('',(#9760),#9764);+#9760 = LINE('',#9761,#9762);+#9761 = CARTESIAN_POINT('',(0.15,0.15));+#9762 = VECTOR('',#9763,1.);+#9763 = DIRECTION('',(0.,-1.));+#9764 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9765 = ADVANCED_FACE('',(#9766),#9754,.T.);+#9766 = FACE_BOUND('',#9767,.T.);+#9767 = EDGE_LOOP('',(#9768,#9791,#9792,#9815));+#9768 = ORIENTED_EDGE('',*,*,#9769,.T.);+#9769 = EDGE_CURVE('',#9770,#9650,#9772,.T.);+#9770 = VERTEX_POINT('',#9771);+#9771 = CARTESIAN_POINT('',(2.15,-0.475,0.445));+#9772 = SURFACE_CURVE('',#9773,(#9777,#9784),.PCURVE_S1.);+#9773 = LINE('',#9774,#9775);+#9774 = CARTESIAN_POINT('',(2.15,-0.475,0.445));+#9775 = VECTOR('',#9776,1.);+#9776 = DIRECTION('',(0.,0.,1.));+#9777 = PCURVE('',#9754,#9778);+#9778 = DEFINITIONAL_REPRESENTATION('',(#9779),#9783);+#9779 = LINE('',#9780,#9781);+#9780 = CARTESIAN_POINT('',(0.,-0.15));+#9781 = VECTOR('',#9782,1.);+#9782 = DIRECTION('',(1.,0.));+#9783 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9784 = PCURVE('',#9672,#9785);+#9785 = DEFINITIONAL_REPRESENTATION('',(#9786),#9790);+#9786 = LINE('',#9787,#9788);+#9787 = CARTESIAN_POINT('',(0.227057976796,-0.484182274245));+#9788 = VECTOR('',#9789,1.);+#9789 = DIRECTION('',(1.,0.));+#9790 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9791 = ORIENTED_EDGE('',*,*,#9740,.F.);+#9792 = ORIENTED_EDGE('',*,*,#9793,.F.);+#9793 = EDGE_CURVE('',#9794,#9713,#9796,.T.);+#9794 = VERTEX_POINT('',#9795);+#9795 = CARTESIAN_POINT('',(2.15,-0.175,0.445));+#9796 = SURFACE_CURVE('',#9797,(#9801,#9808),.PCURVE_S1.);+#9797 = LINE('',#9798,#9799);+#9798 = CARTESIAN_POINT('',(2.15,-0.175,0.445));+#9799 = VECTOR('',#9800,1.);+#9800 = DIRECTION('',(0.,0.,1.));+#9801 = PCURVE('',#9754,#9802);+#9802 = DEFINITIONAL_REPRESENTATION('',(#9803),#9807);+#9803 = LINE('',#9804,#9805);+#9804 = CARTESIAN_POINT('',(0.,0.15));+#9805 = VECTOR('',#9806,1.);+#9806 = DIRECTION('',(1.,0.));+#9807 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9808 = PCURVE('',#9728,#9809);+#9809 = DEFINITIONAL_REPRESENTATION('',(#9810),#9814);+#9810 = LINE('',#9811,#9812);+#9811 = CARTESIAN_POINT('',(0.227057976796,-0.484182274245));+#9812 = VECTOR('',#9813,1.);+#9813 = DIRECTION('',(1.,0.));+#9814 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9815 = ORIENTED_EDGE('',*,*,#9816,.T.);+#9816 = EDGE_CURVE('',#9794,#9770,#9817,.T.);+#9817 = SURFACE_CURVE('',#9818,(#9822,#9829),.PCURVE_S1.);+#9818 = LINE('',#9819,#9820);+#9819 = CARTESIAN_POINT('',(2.15,-0.175,0.445));+#9820 = VECTOR('',#9821,1.);+#9821 = DIRECTION('',(0.,-1.,0.));+#9822 = PCURVE('',#9754,#9823);+#9823 = DEFINITIONAL_REPRESENTATION('',(#9824),#9828);+#9824 = LINE('',#9825,#9826);+#9825 = CARTESIAN_POINT('',(0.,0.15));+#9826 = VECTOR('',#9827,1.);+#9827 = DIRECTION('',(0.,-1.));+#9828 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9829 = PCURVE('',#9830,#9835);+#9830 = PLANE('',#9831);+#9831 = AXIS2_PLACEMENT_3D('',#9832,#9833,#9834);+#9832 = CARTESIAN_POINT('',(2.2,-0.325,0.445));+#9833 = DIRECTION('',(-0.,-0.,-1.));+#9834 = DIRECTION('',(-1.,0.,0.));+#9835 = DEFINITIONAL_REPRESENTATION('',(#9836),#9840);+#9836 = LINE('',#9837,#9838);+#9837 = CARTESIAN_POINT('',(5.E-02,0.15));+#9838 = VECTOR('',#9839,1.);+#9839 = DIRECTION('',(0.,-1.));+#9840 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9841 = ADVANCED_FACE('',(#9842),#9830,.T.);+#9842 = FACE_BOUND('',#9843,.T.);+#9843 = EDGE_LOOP('',(#9844,#9867,#9868,#9891));+#9844 = ORIENTED_EDGE('',*,*,#9845,.T.);+#9845 = EDGE_CURVE('',#9846,#9770,#9848,.T.);+#9846 = VERTEX_POINT('',#9847);+#9847 = CARTESIAN_POINT('',(2.2,-0.475,0.445));+#9848 = SURFACE_CURVE('',#9849,(#9853,#9860),.PCURVE_S1.);+#9849 = LINE('',#9850,#9851);+#9850 = CARTESIAN_POINT('',(2.2,-0.475,0.445));+#9851 = VECTOR('',#9852,1.);+#9852 = DIRECTION('',(-1.,0.,0.));+#9853 = PCURVE('',#9830,#9854);+#9854 = DEFINITIONAL_REPRESENTATION('',(#9855),#9859);+#9855 = LINE('',#9856,#9857);+#9856 = CARTESIAN_POINT('',(0.,-0.15));+#9857 = VECTOR('',#9858,1.);+#9858 = DIRECTION('',(1.,0.));+#9859 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9860 = PCURVE('',#9672,#9861);+#9861 = DEFINITIONAL_REPRESENTATION('',(#9862),#9866);+#9862 = LINE('',#9863,#9864);+#9863 = CARTESIAN_POINT('',(0.227057976796,-0.434182274245));+#9864 = VECTOR('',#9865,1.);+#9865 = DIRECTION('',(0.,-1.));+#9866 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9867 = ORIENTED_EDGE('',*,*,#9816,.F.);+#9868 = ORIENTED_EDGE('',*,*,#9869,.F.);+#9869 = EDGE_CURVE('',#9870,#9794,#9872,.T.);+#9870 = VERTEX_POINT('',#9871);+#9871 = CARTESIAN_POINT('',(2.2,-0.175,0.445));+#9872 = SURFACE_CURVE('',#9873,(#9877,#9884),.PCURVE_S1.);+#9873 = LINE('',#9874,#9875);+#9874 = CARTESIAN_POINT('',(2.2,-0.175,0.445));+#9875 = VECTOR('',#9876,1.);+#9876 = DIRECTION('',(-1.,0.,0.));+#9877 = PCURVE('',#9830,#9878);+#9878 = DEFINITIONAL_REPRESENTATION('',(#9879),#9883);+#9879 = LINE('',#9880,#9881);+#9880 = CARTESIAN_POINT('',(0.,0.15));+#9881 = VECTOR('',#9882,1.);+#9882 = DIRECTION('',(1.,0.));+#9883 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9884 = PCURVE('',#9728,#9885);+#9885 = DEFINITIONAL_REPRESENTATION('',(#9886),#9890);+#9886 = LINE('',#9887,#9888);+#9887 = CARTESIAN_POINT('',(0.227057976796,-0.434182274245));+#9888 = VECTOR('',#9889,1.);+#9889 = DIRECTION('',(0.,-1.));+#9890 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9891 = ORIENTED_EDGE('',*,*,#9892,.T.);+#9892 = EDGE_CURVE('',#9870,#9846,#9893,.T.);+#9893 = SURFACE_CURVE('',#9894,(#9898,#9905),.PCURVE_S1.);+#9894 = LINE('',#9895,#9896);+#9895 = CARTESIAN_POINT('',(2.2,-0.175,0.445));+#9896 = VECTOR('',#9897,1.);+#9897 = DIRECTION('',(0.,-1.,0.));+#9898 = PCURVE('',#9830,#9899);+#9899 = DEFINITIONAL_REPRESENTATION('',(#9900),#9904);+#9900 = LINE('',#9901,#9902);+#9901 = CARTESIAN_POINT('',(0.,0.15));+#9902 = VECTOR('',#9903,1.);+#9903 = DIRECTION('',(0.,-1.));+#9904 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9905 = PCURVE('',#9906,#9911);+#9906 = PLANE('',#9907);+#9907 = AXIS2_PLACEMENT_3D('',#9908,#9909,#9910);+#9908 = CARTESIAN_POINT('',(2.4875,-0.325,0.));+#9909 = DIRECTION('',(-0.839949759337,-0.,-0.542664170358));+#9910 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#9911 = DEFINITIONAL_REPRESENTATION('',(#9912),#9916);+#9912 = LINE('',#9913,#9914);+#9913 = CARTESIAN_POINT('',(0.529793591883,0.15));+#9914 = VECTOR('',#9915,1.);+#9915 = DIRECTION('',(0.,-1.));+#9916 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9917 = ADVANCED_FACE('',(#9918),#9906,.T.);+#9918 = FACE_BOUND('',#9919,.T.);+#9919 = EDGE_LOOP('',(#9920,#9950,#9971,#9972));+#9920 = ORIENTED_EDGE('',*,*,#9921,.F.);+#9921 = EDGE_CURVE('',#9922,#9924,#9926,.T.);+#9922 = VERTEX_POINT('',#9923);+#9923 = CARTESIAN_POINT('',(2.4875,-0.475,0.));+#9924 = VERTEX_POINT('',#9925);+#9925 = CARTESIAN_POINT('',(2.4875,-0.175,0.));+#9926 = SURFACE_CURVE('',#9927,(#9931,#9938),.PCURVE_S1.);+#9927 = LINE('',#9928,#9929);+#9928 = CARTESIAN_POINT('',(2.4875,-0.475,0.));+#9929 = VECTOR('',#9930,1.);+#9930 = DIRECTION('',(0.,1.,0.));+#9931 = PCURVE('',#9906,#9932);+#9932 = DEFINITIONAL_REPRESENTATION('',(#9933),#9937);+#9933 = LINE('',#9934,#9935);+#9934 = CARTESIAN_POINT('',(0.,-0.15));+#9935 = VECTOR('',#9936,1.);+#9936 = DIRECTION('',(0.,1.));+#9937 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9938 = PCURVE('',#9939,#9944);+#9939 = PLANE('',#9940);+#9940 = AXIS2_PLACEMENT_3D('',#9941,#9942,#9943);+#9941 = CARTESIAN_POINT('',(3.205,-0.325,0.));+#9942 = DIRECTION('',(-0.,-0.,-1.));+#9943 = DIRECTION('',(-1.,0.,0.));+#9944 = DEFINITIONAL_REPRESENTATION('',(#9945),#9949);+#9945 = LINE('',#9946,#9947);+#9946 = CARTESIAN_POINT('',(0.7175,-0.15));+#9947 = VECTOR('',#9948,1.);+#9948 = DIRECTION('',(0.,1.));+#9949 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9950 = ORIENTED_EDGE('',*,*,#9951,.T.);+#9951 = EDGE_CURVE('',#9922,#9846,#9952,.T.);+#9952 = SURFACE_CURVE('',#9953,(#9957,#9964),.PCURVE_S1.);+#9953 = LINE('',#9954,#9955);+#9954 = CARTESIAN_POINT('',(2.4875,-0.475,0.));+#9955 = VECTOR('',#9956,1.);+#9956 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#9957 = PCURVE('',#9906,#9958);+#9958 = DEFINITIONAL_REPRESENTATION('',(#9959),#9963);+#9959 = LINE('',#9960,#9961);+#9960 = CARTESIAN_POINT('',(0.,-0.15));+#9961 = VECTOR('',#9962,1.);+#9962 = DIRECTION('',(1.,0.));+#9963 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9964 = PCURVE('',#9672,#9965);+#9965 = DEFINITIONAL_REPRESENTATION('',(#9966),#9970);+#9966 = LINE('',#9967,#9968);+#9967 = CARTESIAN_POINT('',(-0.217942023204,-0.146682274245));+#9968 = VECTOR('',#9969,1.);+#9969 = DIRECTION('',(0.839949759337,-0.542664170358));+#9970 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9971 = ORIENTED_EDGE('',*,*,#9892,.F.);+#9972 = ORIENTED_EDGE('',*,*,#9973,.F.);+#9973 = EDGE_CURVE('',#9924,#9870,#9974,.T.);+#9974 = SURFACE_CURVE('',#9975,(#9979,#9986),.PCURVE_S1.);+#9975 = LINE('',#9976,#9977);+#9976 = CARTESIAN_POINT('',(2.4875,-0.175,0.));+#9977 = VECTOR('',#9978,1.);+#9978 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#9979 = PCURVE('',#9906,#9980);+#9980 = DEFINITIONAL_REPRESENTATION('',(#9981),#9985);+#9981 = LINE('',#9982,#9983);+#9982 = CARTESIAN_POINT('',(0.,0.15));+#9983 = VECTOR('',#9984,1.);+#9984 = DIRECTION('',(1.,0.));+#9985 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9986 = PCURVE('',#9728,#9987);+#9987 = DEFINITIONAL_REPRESENTATION('',(#9988),#9992);+#9988 = LINE('',#9989,#9990);+#9989 = CARTESIAN_POINT('',(-0.217942023204,-0.146682274245));+#9990 = VECTOR('',#9991,1.);+#9991 = DIRECTION('',(0.839949759337,-0.542664170358));+#9992 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9993 = ADVANCED_FACE('',(#9994),#9939,.T.);+#9994 = FACE_BOUND('',#9995,.T.);+#9995 = EDGE_LOOP('',(#9996,#10026,#10047,#10048));+#9996 = ORIENTED_EDGE('',*,*,#9997,.F.);+#9997 = EDGE_CURVE('',#9998,#10000,#10002,.T.);+#9998 = VERTEX_POINT('',#9999);+#9999 = CARTESIAN_POINT('',(3.205,-0.475,0.));+#10000 = VERTEX_POINT('',#10001);+#10001 = CARTESIAN_POINT('',(3.205,-0.175,0.));+#10002 = SURFACE_CURVE('',#10003,(#10007,#10014),.PCURVE_S1.);+#10003 = LINE('',#10004,#10005);+#10004 = CARTESIAN_POINT('',(3.205,-0.475,0.));+#10005 = VECTOR('',#10006,1.);+#10006 = DIRECTION('',(0.,1.,0.));+#10007 = PCURVE('',#9939,#10008);+#10008 = DEFINITIONAL_REPRESENTATION('',(#10009),#10013);+#10009 = LINE('',#10010,#10011);+#10010 = CARTESIAN_POINT('',(0.,-0.15));+#10011 = VECTOR('',#10012,1.);+#10012 = DIRECTION('',(0.,1.));+#10013 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10014 = PCURVE('',#10015,#10020);+#10015 = PLANE('',#10016);+#10016 = AXIS2_PLACEMENT_3D('',#10017,#10018,#10019);+#10017 = CARTESIAN_POINT('',(3.205,-0.325,0.15));+#10018 = DIRECTION('',(1.,0.,0.));+#10019 = DIRECTION('',(0.,0.,-1.));+#10020 = DEFINITIONAL_REPRESENTATION('',(#10021),#10025);+#10021 = LINE('',#10022,#10023);+#10022 = CARTESIAN_POINT('',(0.15,-0.15));+#10023 = VECTOR('',#10024,1.);+#10024 = DIRECTION('',(0.,1.));+#10025 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10026 = ORIENTED_EDGE('',*,*,#10027,.T.);+#10027 = EDGE_CURVE('',#9998,#9922,#10028,.T.);+#10028 = SURFACE_CURVE('',#10029,(#10033,#10040),.PCURVE_S1.);+#10029 = LINE('',#10030,#10031);+#10030 = CARTESIAN_POINT('',(3.205,-0.475,0.));+#10031 = VECTOR('',#10032,1.);+#10032 = DIRECTION('',(-1.,0.,0.));+#10033 = PCURVE('',#9939,#10034);+#10034 = DEFINITIONAL_REPRESENTATION('',(#10035),#10039);+#10035 = LINE('',#10036,#10037);+#10036 = CARTESIAN_POINT('',(0.,-0.15));+#10037 = VECTOR('',#10038,1.);+#10038 = DIRECTION('',(1.,0.));+#10039 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10040 = PCURVE('',#9672,#10041);+#10041 = DEFINITIONAL_REPRESENTATION('',(#10042),#10046);+#10042 = LINE('',#10043,#10044);+#10043 = CARTESIAN_POINT('',(-0.217942023204,0.570817725755));+#10044 = VECTOR('',#10045,1.);+#10045 = DIRECTION('',(0.,-1.));+#10046 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10047 = ORIENTED_EDGE('',*,*,#9921,.T.);+#10048 = ORIENTED_EDGE('',*,*,#10049,.F.);+#10049 = EDGE_CURVE('',#10000,#9924,#10050,.T.);+#10050 = SURFACE_CURVE('',#10051,(#10055,#10062),.PCURVE_S1.);+#10051 = LINE('',#10052,#10053);+#10052 = CARTESIAN_POINT('',(3.205,-0.175,0.));+#10053 = VECTOR('',#10054,1.);+#10054 = DIRECTION('',(-1.,0.,0.));+#10055 = PCURVE('',#9939,#10056);+#10056 = DEFINITIONAL_REPRESENTATION('',(#10057),#10061);+#10057 = LINE('',#10058,#10059);+#10058 = CARTESIAN_POINT('',(0.,0.15));+#10059 = VECTOR('',#10060,1.);+#10060 = DIRECTION('',(1.,0.));+#10061 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10062 = PCURVE('',#9728,#10063);+#10063 = DEFINITIONAL_REPRESENTATION('',(#10064),#10068);+#10064 = LINE('',#10065,#10066);+#10065 = CARTESIAN_POINT('',(-0.217942023204,0.570817725755));+#10066 = VECTOR('',#10067,1.);+#10067 = DIRECTION('',(0.,-1.));+#10068 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10069 = ADVANCED_FACE('',(#10070),#10015,.T.);+#10070 = FACE_BOUND('',#10071,.T.);+#10071 = EDGE_LOOP('',(#10072,#10102,#10123,#10124));+#10072 = ORIENTED_EDGE('',*,*,#10073,.F.);+#10073 = EDGE_CURVE('',#10074,#10076,#10078,.T.);+#10074 = VERTEX_POINT('',#10075);+#10075 = CARTESIAN_POINT('',(3.205,-0.475,0.15));+#10076 = VERTEX_POINT('',#10077);+#10077 = CARTESIAN_POINT('',(3.205,-0.175,0.15));+#10078 = SURFACE_CURVE('',#10079,(#10083,#10090),.PCURVE_S1.);+#10079 = LINE('',#10080,#10081);+#10080 = CARTESIAN_POINT('',(3.205,-0.475,0.15));+#10081 = VECTOR('',#10082,1.);+#10082 = DIRECTION('',(0.,1.,0.));+#10083 = PCURVE('',#10015,#10084);+#10084 = DEFINITIONAL_REPRESENTATION('',(#10085),#10089);+#10085 = LINE('',#10086,#10087);+#10086 = CARTESIAN_POINT('',(0.,-0.15));+#10087 = VECTOR('',#10088,1.);+#10088 = DIRECTION('',(0.,1.));+#10089 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10090 = PCURVE('',#10091,#10096);+#10091 = PLANE('',#10092);+#10092 = AXIS2_PLACEMENT_3D('',#10093,#10094,#10095);+#10093 = CARTESIAN_POINT('',(2.6375,-0.325,0.15));+#10094 = DIRECTION('',(0.,0.,1.));+#10095 = DIRECTION('',(1.,0.,0.));+#10096 = DEFINITIONAL_REPRESENTATION('',(#10097),#10101);+#10097 = LINE('',#10098,#10099);+#10098 = CARTESIAN_POINT('',(0.5675,-0.15));+#10099 = VECTOR('',#10100,1.);+#10100 = DIRECTION('',(0.,1.));+#10101 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10102 = ORIENTED_EDGE('',*,*,#10103,.T.);+#10103 = EDGE_CURVE('',#10074,#9998,#10104,.T.);+#10104 = SURFACE_CURVE('',#10105,(#10109,#10116),.PCURVE_S1.);+#10105 = LINE('',#10106,#10107);+#10106 = CARTESIAN_POINT('',(3.205,-0.475,0.15));+#10107 = VECTOR('',#10108,1.);+#10108 = DIRECTION('',(0.,0.,-1.));+#10109 = PCURVE('',#10015,#10110);+#10110 = DEFINITIONAL_REPRESENTATION('',(#10111),#10115);+#10111 = LINE('',#10112,#10113);+#10112 = CARTESIAN_POINT('',(0.,-0.15));+#10113 = VECTOR('',#10114,1.);+#10114 = DIRECTION('',(1.,0.));+#10115 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10116 = PCURVE('',#9672,#10117);+#10117 = DEFINITIONAL_REPRESENTATION('',(#10118),#10122);+#10118 = LINE('',#10119,#10120);+#10119 = CARTESIAN_POINT('',(-6.7942023204E-02,0.570817725755));+#10120 = VECTOR('',#10121,1.);+#10121 = DIRECTION('',(-1.,0.));+#10122 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10123 = ORIENTED_EDGE('',*,*,#9997,.T.);+#10124 = ORIENTED_EDGE('',*,*,#10125,.F.);+#10125 = EDGE_CURVE('',#10076,#10000,#10126,.T.);+#10126 = SURFACE_CURVE('',#10127,(#10131,#10138),.PCURVE_S1.);+#10127 = LINE('',#10128,#10129);+#10128 = CARTESIAN_POINT('',(3.205,-0.175,0.15));+#10129 = VECTOR('',#10130,1.);+#10130 = DIRECTION('',(0.,0.,-1.));+#10131 = PCURVE('',#10015,#10132);+#10132 = DEFINITIONAL_REPRESENTATION('',(#10133),#10137);+#10133 = LINE('',#10134,#10135);+#10134 = CARTESIAN_POINT('',(0.,0.15));+#10135 = VECTOR('',#10136,1.);+#10136 = DIRECTION('',(1.,0.));+#10137 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10138 = PCURVE('',#9728,#10139);+#10139 = DEFINITIONAL_REPRESENTATION('',(#10140),#10144);+#10140 = LINE('',#10141,#10142);+#10141 = CARTESIAN_POINT('',(-6.7942023204E-02,0.570817725755));+#10142 = VECTOR('',#10143,1.);+#10143 = DIRECTION('',(-1.,0.));+#10144 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10145 = ADVANCED_FACE('',(#10146),#10091,.T.);+#10146 = FACE_BOUND('',#10147,.T.);+#10147 = EDGE_LOOP('',(#10148,#10173,#10194,#10195));+#10148 = ORIENTED_EDGE('',*,*,#10149,.F.);+#10149 = EDGE_CURVE('',#10150,#10152,#10154,.T.);+#10150 = VERTEX_POINT('',#10151);+#10151 = CARTESIAN_POINT('',(2.6375,-0.475,0.15));+#10152 = VERTEX_POINT('',#10153);+#10153 = CARTESIAN_POINT('',(2.6375,-0.175,0.15));+#10154 = SURFACE_CURVE('',#10155,(#10159,#10166),.PCURVE_S1.);+#10155 = LINE('',#10156,#10157);+#10156 = CARTESIAN_POINT('',(2.6375,-0.475,0.15));+#10157 = VECTOR('',#10158,1.);+#10158 = DIRECTION('',(0.,1.,0.));+#10159 = PCURVE('',#10091,#10160);+#10160 = DEFINITIONAL_REPRESENTATION('',(#10161),#10165);+#10161 = LINE('',#10162,#10163);+#10162 = CARTESIAN_POINT('',(0.,-0.15));+#10163 = VECTOR('',#10164,1.);+#10164 = DIRECTION('',(0.,1.));+#10165 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10166 = PCURVE('',#9700,#10167);+#10167 = DEFINITIONAL_REPRESENTATION('',(#10168),#10172);+#10168 = LINE('',#10169,#10170);+#10169 = CARTESIAN_POINT('',(0.529793591883,-0.15));+#10170 = VECTOR('',#10171,1.);+#10171 = DIRECTION('',(0.,1.));+#10172 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10173 = ORIENTED_EDGE('',*,*,#10174,.T.);+#10174 = EDGE_CURVE('',#10150,#10074,#10175,.T.);+#10175 = SURFACE_CURVE('',#10176,(#10180,#10187),.PCURVE_S1.);+#10176 = LINE('',#10177,#10178);+#10177 = CARTESIAN_POINT('',(2.6375,-0.475,0.15));+#10178 = VECTOR('',#10179,1.);+#10179 = DIRECTION('',(1.,0.,0.));+#10180 = PCURVE('',#10091,#10181);+#10181 = DEFINITIONAL_REPRESENTATION('',(#10182),#10186);+#10182 = LINE('',#10183,#10184);+#10183 = CARTESIAN_POINT('',(0.,-0.15));+#10184 = VECTOR('',#10185,1.);+#10185 = DIRECTION('',(1.,0.));+#10186 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10187 = PCURVE('',#9672,#10188);+#10188 = DEFINITIONAL_REPRESENTATION('',(#10189),#10193);+#10189 = LINE('',#10190,#10191);+#10190 = CARTESIAN_POINT('',(-6.7942023204E-02,3.317725755E-03));+#10191 = VECTOR('',#10192,1.);+#10192 = DIRECTION('',(0.,1.));+#10193 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10194 = ORIENTED_EDGE('',*,*,#10073,.T.);+#10195 = ORIENTED_EDGE('',*,*,#10196,.F.);+#10196 = EDGE_CURVE('',#10152,#10076,#10197,.T.);+#10197 = SURFACE_CURVE('',#10198,(#10202,#10209),.PCURVE_S1.);+#10198 = LINE('',#10199,#10200);+#10199 = CARTESIAN_POINT('',(2.6375,-0.175,0.15));+#10200 = VECTOR('',#10201,1.);+#10201 = DIRECTION('',(1.,0.,0.));+#10202 = PCURVE('',#10091,#10203);+#10203 = DEFINITIONAL_REPRESENTATION('',(#10204),#10208);+#10204 = LINE('',#10205,#10206);+#10205 = CARTESIAN_POINT('',(0.,0.15));+#10206 = VECTOR('',#10207,1.);+#10207 = DIRECTION('',(1.,0.));+#10208 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10209 = PCURVE('',#9728,#10210);+#10210 = DEFINITIONAL_REPRESENTATION('',(#10211),#10215);+#10211 = LINE('',#10212,#10213);+#10212 = CARTESIAN_POINT('',(-6.7942023204E-02,3.317725755E-03));+#10213 = VECTOR('',#10214,1.);+#10214 = DIRECTION('',(0.,1.));+#10215 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10216 = ADVANCED_FACE('',(#10217),#9728,.T.);+#10217 = FACE_BOUND('',#10218,.T.);+#10218 = EDGE_LOOP('',(#10219,#10220,#10241,#10242,#10243,#10244,#10245,+ #10246));+#10219 = ORIENTED_EDGE('',*,*,#9712,.T.);+#10220 = ORIENTED_EDGE('',*,*,#10221,.T.);+#10221 = EDGE_CURVE('',#9685,#10152,#10222,.T.);+#10222 = SURFACE_CURVE('',#10223,(#10227,#10234),.PCURVE_S1.);+#10223 = LINE('',#10224,#10225);+#10224 = CARTESIAN_POINT('',(2.35,-0.175,0.595));+#10225 = VECTOR('',#10226,1.);+#10226 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#10227 = PCURVE('',#9728,#10228);+#10228 = DEFINITIONAL_REPRESENTATION('',(#10229),#10233);+#10229 = LINE('',#10230,#10231);+#10230 = CARTESIAN_POINT('',(0.377057976796,-0.284182274245));+#10231 = VECTOR('',#10232,1.);+#10232 = DIRECTION('',(-0.839949759337,0.542664170358));+#10233 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10234 = PCURVE('',#9700,#10235);+#10235 = DEFINITIONAL_REPRESENTATION('',(#10236),#10240);+#10236 = LINE('',#10237,#10238);+#10237 = CARTESIAN_POINT('',(0.,0.15));+#10238 = VECTOR('',#10239,1.);+#10239 = DIRECTION('',(1.,0.));+#10240 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10241 = ORIENTED_EDGE('',*,*,#10196,.T.);+#10242 = ORIENTED_EDGE('',*,*,#10125,.T.);+#10243 = ORIENTED_EDGE('',*,*,#10049,.T.);+#10244 = ORIENTED_EDGE('',*,*,#9973,.T.);+#10245 = ORIENTED_EDGE('',*,*,#9869,.T.);+#10246 = ORIENTED_EDGE('',*,*,#9793,.T.);+#10247 = ADVANCED_FACE('',(#10248),#9700,.T.);+#10248 = FACE_BOUND('',#10249,.T.);+#10249 = EDGE_LOOP('',(#10250,#10251,#10272,#10273));+#10250 = ORIENTED_EDGE('',*,*,#9684,.F.);+#10251 = ORIENTED_EDGE('',*,*,#10252,.T.);+#10252 = EDGE_CURVE('',#9652,#10150,#10253,.T.);+#10253 = SURFACE_CURVE('',#10254,(#10258,#10265),.PCURVE_S1.);+#10254 = LINE('',#10255,#10256);+#10255 = CARTESIAN_POINT('',(2.35,-0.475,0.595));+#10256 = VECTOR('',#10257,1.);+#10257 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#10258 = PCURVE('',#9700,#10259);+#10259 = DEFINITIONAL_REPRESENTATION('',(#10260),#10264);+#10260 = LINE('',#10261,#10262);+#10261 = CARTESIAN_POINT('',(0.,-0.15));+#10262 = VECTOR('',#10263,1.);+#10263 = DIRECTION('',(1.,0.));+#10264 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10265 = PCURVE('',#9672,#10266);+#10266 = DEFINITIONAL_REPRESENTATION('',(#10267),#10271);+#10267 = LINE('',#10268,#10269);+#10268 = CARTESIAN_POINT('',(0.377057976796,-0.284182274245));+#10269 = VECTOR('',#10270,1.);+#10270 = DIRECTION('',(-0.839949759337,0.542664170358));+#10271 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10272 = ORIENTED_EDGE('',*,*,#10149,.T.);+#10273 = ORIENTED_EDGE('',*,*,#10221,.F.);+#10274 = ADVANCED_FACE('',(#10275),#9672,.F.);+#10275 = FACE_BOUND('',#10276,.F.);+#10276 = EDGE_LOOP('',(#10277,#10278,#10279,#10280,#10281,#10282,#10283,+ #10284));+#10277 = ORIENTED_EDGE('',*,*,#9649,.T.);+#10278 = ORIENTED_EDGE('',*,*,#10252,.T.);+#10279 = ORIENTED_EDGE('',*,*,#10174,.T.);+#10280 = ORIENTED_EDGE('',*,*,#10103,.T.);+#10281 = ORIENTED_EDGE('',*,*,#10027,.T.);+#10282 = ORIENTED_EDGE('',*,*,#9951,.T.);+#10283 = ORIENTED_EDGE('',*,*,#9845,.T.);+#10284 = ORIENTED_EDGE('',*,*,#9769,.T.);+#10285 = MANIFOLD_SOLID_BREP('',#10286);+#10286 = CLOSED_SHELL('',(#10287,#10407,#10483,#10559,#10635,#10711,+ #10787,#10858,#10889,#10916));+#10287 = ADVANCED_FACE('',(#10288),#10302,.T.);+#10288 = FACE_BOUND('',#10289,.T.);+#10289 = EDGE_LOOP('',(#10290,#10325,#10353,#10381));+#10290 = ORIENTED_EDGE('',*,*,#10291,.T.);+#10291 = EDGE_CURVE('',#10292,#10294,#10296,.T.);+#10292 = VERTEX_POINT('',#10293);+#10293 = CARTESIAN_POINT('',(2.15,0.175,0.595));+#10294 = VERTEX_POINT('',#10295);+#10295 = CARTESIAN_POINT('',(2.35,0.175,0.595));+#10296 = SURFACE_CURVE('',#10297,(#10301,#10313),.PCURVE_S1.);+#10297 = LINE('',#10298,#10299);+#10298 = CARTESIAN_POINT('',(2.15,0.175,0.595));+#10299 = VECTOR('',#10300,1.);+#10300 = DIRECTION('',(1.,0.,0.));+#10301 = PCURVE('',#10302,#10307);+#10302 = PLANE('',#10303);+#10303 = AXIS2_PLACEMENT_3D('',#10304,#10305,#10306);+#10304 = CARTESIAN_POINT('',(2.15,0.325,0.595));+#10305 = DIRECTION('',(0.,0.,1.));+#10306 = DIRECTION('',(1.,0.,0.));+#10307 = DEFINITIONAL_REPRESENTATION('',(#10308),#10312);+#10308 = LINE('',#10309,#10310);+#10309 = CARTESIAN_POINT('',(0.,-0.15));+#10310 = VECTOR('',#10311,1.);+#10311 = DIRECTION('',(1.,0.));+#10312 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10313 = PCURVE('',#10314,#10319);+#10314 = PLANE('',#10315);+#10315 = AXIS2_PLACEMENT_3D('',#10316,#10317,#10318);+#10316 = CARTESIAN_POINT('',(2.634182274245,0.175,0.217942023204));+#10317 = DIRECTION('',(0.,1.,0.));+#10318 = DIRECTION('',(0.,0.,1.));+#10319 = DEFINITIONAL_REPRESENTATION('',(#10320),#10324);+#10320 = LINE('',#10321,#10322);+#10321 = CARTESIAN_POINT('',(0.377057976796,-0.484182274245));+#10322 = VECTOR('',#10323,1.);+#10323 = DIRECTION('',(0.,1.));+#10324 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10325 = ORIENTED_EDGE('',*,*,#10326,.T.);+#10326 = EDGE_CURVE('',#10294,#10327,#10329,.T.);+#10327 = VERTEX_POINT('',#10328);+#10328 = CARTESIAN_POINT('',(2.35,0.475,0.595));+#10329 = SURFACE_CURVE('',#10330,(#10334,#10341),.PCURVE_S1.);+#10330 = LINE('',#10331,#10332);+#10331 = CARTESIAN_POINT('',(2.35,0.175,0.595));+#10332 = VECTOR('',#10333,1.);+#10333 = DIRECTION('',(0.,1.,0.));+#10334 = PCURVE('',#10302,#10335);+#10335 = DEFINITIONAL_REPRESENTATION('',(#10336),#10340);+#10336 = LINE('',#10337,#10338);+#10337 = CARTESIAN_POINT('',(0.2,-0.15));+#10338 = VECTOR('',#10339,1.);+#10339 = DIRECTION('',(0.,1.));+#10340 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10341 = PCURVE('',#10342,#10347);+#10342 = PLANE('',#10343);+#10343 = AXIS2_PLACEMENT_3D('',#10344,#10345,#10346);+#10344 = CARTESIAN_POINT('',(2.35,0.325,0.595));+#10345 = DIRECTION('',(0.839949759337,0.,0.542664170358));+#10346 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#10347 = DEFINITIONAL_REPRESENTATION('',(#10348),#10352);+#10348 = LINE('',#10349,#10350);+#10349 = CARTESIAN_POINT('',(0.,-0.15));+#10350 = VECTOR('',#10351,1.);+#10351 = DIRECTION('',(0.,1.));+#10352 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10353 = ORIENTED_EDGE('',*,*,#10354,.F.);+#10354 = EDGE_CURVE('',#10355,#10327,#10357,.T.);+#10355 = VERTEX_POINT('',#10356);+#10356 = CARTESIAN_POINT('',(2.15,0.475,0.595));+#10357 = SURFACE_CURVE('',#10358,(#10362,#10369),.PCURVE_S1.);+#10358 = LINE('',#10359,#10360);+#10359 = CARTESIAN_POINT('',(2.15,0.475,0.595));+#10360 = VECTOR('',#10361,1.);+#10361 = DIRECTION('',(1.,0.,0.));+#10362 = PCURVE('',#10302,#10363);+#10363 = DEFINITIONAL_REPRESENTATION('',(#10364),#10368);+#10364 = LINE('',#10365,#10366);+#10365 = CARTESIAN_POINT('',(0.,0.15));+#10366 = VECTOR('',#10367,1.);+#10367 = DIRECTION('',(1.,0.));+#10368 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10369 = PCURVE('',#10370,#10375);+#10370 = PLANE('',#10371);+#10371 = AXIS2_PLACEMENT_3D('',#10372,#10373,#10374);+#10372 = CARTESIAN_POINT('',(2.634182274245,0.475,0.217942023204));+#10373 = DIRECTION('',(0.,1.,0.));+#10374 = DIRECTION('',(0.,0.,1.));+#10375 = DEFINITIONAL_REPRESENTATION('',(#10376),#10380);+#10376 = LINE('',#10377,#10378);+#10377 = CARTESIAN_POINT('',(0.377057976796,-0.484182274245));+#10378 = VECTOR('',#10379,1.);+#10379 = DIRECTION('',(0.,1.));+#10380 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10381 = ORIENTED_EDGE('',*,*,#10382,.T.);+#10382 = EDGE_CURVE('',#10355,#10292,#10383,.T.);+#10383 = SURFACE_CURVE('',#10384,(#10388,#10395),.PCURVE_S1.);+#10384 = LINE('',#10385,#10386);+#10385 = CARTESIAN_POINT('',(2.15,0.475,0.595));+#10386 = VECTOR('',#10387,1.);+#10387 = DIRECTION('',(0.,-1.,0.));+#10388 = PCURVE('',#10302,#10389);+#10389 = DEFINITIONAL_REPRESENTATION('',(#10390),#10394);+#10390 = LINE('',#10391,#10392);+#10391 = CARTESIAN_POINT('',(0.,0.15));+#10392 = VECTOR('',#10393,1.);+#10393 = DIRECTION('',(0.,-1.));+#10394 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10395 = PCURVE('',#10396,#10401);+#10396 = PLANE('',#10397);+#10397 = AXIS2_PLACEMENT_3D('',#10398,#10399,#10400);+#10398 = CARTESIAN_POINT('',(2.15,0.325,0.445));+#10399 = DIRECTION('',(-1.,0.,0.));+#10400 = DIRECTION('',(0.,0.,1.));+#10401 = DEFINITIONAL_REPRESENTATION('',(#10402),#10406);+#10402 = LINE('',#10403,#10404);+#10403 = CARTESIAN_POINT('',(0.15,0.15));+#10404 = VECTOR('',#10405,1.);+#10405 = DIRECTION('',(0.,-1.));+#10406 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10407 = ADVANCED_FACE('',(#10408),#10396,.T.);+#10408 = FACE_BOUND('',#10409,.T.);+#10409 = EDGE_LOOP('',(#10410,#10433,#10434,#10457));+#10410 = ORIENTED_EDGE('',*,*,#10411,.T.);+#10411 = EDGE_CURVE('',#10412,#10292,#10414,.T.);+#10412 = VERTEX_POINT('',#10413);+#10413 = CARTESIAN_POINT('',(2.15,0.175,0.445));+#10414 = SURFACE_CURVE('',#10415,(#10419,#10426),.PCURVE_S1.);+#10415 = LINE('',#10416,#10417);+#10416 = CARTESIAN_POINT('',(2.15,0.175,0.445));+#10417 = VECTOR('',#10418,1.);+#10418 = DIRECTION('',(0.,0.,1.));+#10419 = PCURVE('',#10396,#10420);+#10420 = DEFINITIONAL_REPRESENTATION('',(#10421),#10425);+#10421 = LINE('',#10422,#10423);+#10422 = CARTESIAN_POINT('',(0.,-0.15));+#10423 = VECTOR('',#10424,1.);+#10424 = DIRECTION('',(1.,0.));+#10425 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10426 = PCURVE('',#10314,#10427);+#10427 = DEFINITIONAL_REPRESENTATION('',(#10428),#10432);+#10428 = LINE('',#10429,#10430);+#10429 = CARTESIAN_POINT('',(0.227057976796,-0.484182274245));+#10430 = VECTOR('',#10431,1.);+#10431 = DIRECTION('',(1.,0.));+#10432 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10433 = ORIENTED_EDGE('',*,*,#10382,.F.);+#10434 = ORIENTED_EDGE('',*,*,#10435,.F.);+#10435 = EDGE_CURVE('',#10436,#10355,#10438,.T.);+#10436 = VERTEX_POINT('',#10437);+#10437 = CARTESIAN_POINT('',(2.15,0.475,0.445));+#10438 = SURFACE_CURVE('',#10439,(#10443,#10450),.PCURVE_S1.);+#10439 = LINE('',#10440,#10441);+#10440 = CARTESIAN_POINT('',(2.15,0.475,0.445));+#10441 = VECTOR('',#10442,1.);+#10442 = DIRECTION('',(0.,0.,1.));+#10443 = PCURVE('',#10396,#10444);+#10444 = DEFINITIONAL_REPRESENTATION('',(#10445),#10449);+#10445 = LINE('',#10446,#10447);+#10446 = CARTESIAN_POINT('',(0.,0.15));+#10447 = VECTOR('',#10448,1.);+#10448 = DIRECTION('',(1.,0.));+#10449 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10450 = PCURVE('',#10370,#10451);+#10451 = DEFINITIONAL_REPRESENTATION('',(#10452),#10456);+#10452 = LINE('',#10453,#10454);+#10453 = CARTESIAN_POINT('',(0.227057976796,-0.484182274245));+#10454 = VECTOR('',#10455,1.);+#10455 = DIRECTION('',(1.,0.));+#10456 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10457 = ORIENTED_EDGE('',*,*,#10458,.T.);+#10458 = EDGE_CURVE('',#10436,#10412,#10459,.T.);+#10459 = SURFACE_CURVE('',#10460,(#10464,#10471),.PCURVE_S1.);+#10460 = LINE('',#10461,#10462);+#10461 = CARTESIAN_POINT('',(2.15,0.475,0.445));+#10462 = VECTOR('',#10463,1.);+#10463 = DIRECTION('',(0.,-1.,0.));+#10464 = PCURVE('',#10396,#10465);+#10465 = DEFINITIONAL_REPRESENTATION('',(#10466),#10470);+#10466 = LINE('',#10467,#10468);+#10467 = CARTESIAN_POINT('',(0.,0.15));+#10468 = VECTOR('',#10469,1.);+#10469 = DIRECTION('',(0.,-1.));+#10470 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10471 = PCURVE('',#10472,#10477);+#10472 = PLANE('',#10473);+#10473 = AXIS2_PLACEMENT_3D('',#10474,#10475,#10476);+#10474 = CARTESIAN_POINT('',(2.2,0.325,0.445));+#10475 = DIRECTION('',(-0.,-0.,-1.));+#10476 = DIRECTION('',(-1.,0.,0.));+#10477 = DEFINITIONAL_REPRESENTATION('',(#10478),#10482);+#10478 = LINE('',#10479,#10480);+#10479 = CARTESIAN_POINT('',(5.E-02,0.15));+#10480 = VECTOR('',#10481,1.);+#10481 = DIRECTION('',(0.,-1.));+#10482 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10483 = ADVANCED_FACE('',(#10484),#10472,.T.);+#10484 = FACE_BOUND('',#10485,.T.);+#10485 = EDGE_LOOP('',(#10486,#10509,#10510,#10533));+#10486 = ORIENTED_EDGE('',*,*,#10487,.T.);+#10487 = EDGE_CURVE('',#10488,#10412,#10490,.T.);+#10488 = VERTEX_POINT('',#10489);+#10489 = CARTESIAN_POINT('',(2.2,0.175,0.445));+#10490 = SURFACE_CURVE('',#10491,(#10495,#10502),.PCURVE_S1.);+#10491 = LINE('',#10492,#10493);+#10492 = CARTESIAN_POINT('',(2.2,0.175,0.445));+#10493 = VECTOR('',#10494,1.);+#10494 = DIRECTION('',(-1.,0.,0.));+#10495 = PCURVE('',#10472,#10496);+#10496 = DEFINITIONAL_REPRESENTATION('',(#10497),#10501);+#10497 = LINE('',#10498,#10499);+#10498 = CARTESIAN_POINT('',(0.,-0.15));+#10499 = VECTOR('',#10500,1.);+#10500 = DIRECTION('',(1.,0.));+#10501 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10502 = PCURVE('',#10314,#10503);+#10503 = DEFINITIONAL_REPRESENTATION('',(#10504),#10508);+#10504 = LINE('',#10505,#10506);+#10505 = CARTESIAN_POINT('',(0.227057976796,-0.434182274245));+#10506 = VECTOR('',#10507,1.);+#10507 = DIRECTION('',(0.,-1.));+#10508 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10509 = ORIENTED_EDGE('',*,*,#10458,.F.);+#10510 = ORIENTED_EDGE('',*,*,#10511,.F.);+#10511 = EDGE_CURVE('',#10512,#10436,#10514,.T.);+#10512 = VERTEX_POINT('',#10513);+#10513 = CARTESIAN_POINT('',(2.2,0.475,0.445));+#10514 = SURFACE_CURVE('',#10515,(#10519,#10526),.PCURVE_S1.);+#10515 = LINE('',#10516,#10517);+#10516 = CARTESIAN_POINT('',(2.2,0.475,0.445));+#10517 = VECTOR('',#10518,1.);+#10518 = DIRECTION('',(-1.,0.,0.));+#10519 = PCURVE('',#10472,#10520);+#10520 = DEFINITIONAL_REPRESENTATION('',(#10521),#10525);+#10521 = LINE('',#10522,#10523);+#10522 = CARTESIAN_POINT('',(0.,0.15));+#10523 = VECTOR('',#10524,1.);+#10524 = DIRECTION('',(1.,0.));+#10525 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10526 = PCURVE('',#10370,#10527);+#10527 = DEFINITIONAL_REPRESENTATION('',(#10528),#10532);+#10528 = LINE('',#10529,#10530);+#10529 = CARTESIAN_POINT('',(0.227057976796,-0.434182274245));+#10530 = VECTOR('',#10531,1.);+#10531 = DIRECTION('',(0.,-1.));+#10532 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10533 = ORIENTED_EDGE('',*,*,#10534,.T.);+#10534 = EDGE_CURVE('',#10512,#10488,#10535,.T.);+#10535 = SURFACE_CURVE('',#10536,(#10540,#10547),.PCURVE_S1.);+#10536 = LINE('',#10537,#10538);+#10537 = CARTESIAN_POINT('',(2.2,0.475,0.445));+#10538 = VECTOR('',#10539,1.);+#10539 = DIRECTION('',(0.,-1.,0.));+#10540 = PCURVE('',#10472,#10541);+#10541 = DEFINITIONAL_REPRESENTATION('',(#10542),#10546);+#10542 = LINE('',#10543,#10544);+#10543 = CARTESIAN_POINT('',(0.,0.15));+#10544 = VECTOR('',#10545,1.);+#10545 = DIRECTION('',(0.,-1.));+#10546 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10547 = PCURVE('',#10548,#10553);+#10548 = PLANE('',#10549);+#10549 = AXIS2_PLACEMENT_3D('',#10550,#10551,#10552);+#10550 = CARTESIAN_POINT('',(2.4875,0.325,0.));+#10551 = DIRECTION('',(-0.839949759337,-0.,-0.542664170358));+#10552 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#10553 = DEFINITIONAL_REPRESENTATION('',(#10554),#10558);+#10554 = LINE('',#10555,#10556);+#10555 = CARTESIAN_POINT('',(0.529793591883,0.15));+#10556 = VECTOR('',#10557,1.);+#10557 = DIRECTION('',(0.,-1.));+#10558 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10559 = ADVANCED_FACE('',(#10560),#10548,.T.);+#10560 = FACE_BOUND('',#10561,.T.);+#10561 = EDGE_LOOP('',(#10562,#10592,#10613,#10614));+#10562 = ORIENTED_EDGE('',*,*,#10563,.F.);+#10563 = EDGE_CURVE('',#10564,#10566,#10568,.T.);+#10564 = VERTEX_POINT('',#10565);+#10565 = CARTESIAN_POINT('',(2.4875,0.175,0.));+#10566 = VERTEX_POINT('',#10567);+#10567 = CARTESIAN_POINT('',(2.4875,0.475,0.));+#10568 = SURFACE_CURVE('',#10569,(#10573,#10580),.PCURVE_S1.);+#10569 = LINE('',#10570,#10571);+#10570 = CARTESIAN_POINT('',(2.4875,0.175,0.));+#10571 = VECTOR('',#10572,1.);+#10572 = DIRECTION('',(0.,1.,0.));+#10573 = PCURVE('',#10548,#10574);+#10574 = DEFINITIONAL_REPRESENTATION('',(#10575),#10579);+#10575 = LINE('',#10576,#10577);+#10576 = CARTESIAN_POINT('',(0.,-0.15));+#10577 = VECTOR('',#10578,1.);+#10578 = DIRECTION('',(0.,1.));+#10579 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10580 = PCURVE('',#10581,#10586);+#10581 = PLANE('',#10582);+#10582 = AXIS2_PLACEMENT_3D('',#10583,#10584,#10585);+#10583 = CARTESIAN_POINT('',(3.205,0.325,0.));+#10584 = DIRECTION('',(-0.,-0.,-1.));+#10585 = DIRECTION('',(-1.,0.,0.));+#10586 = DEFINITIONAL_REPRESENTATION('',(#10587),#10591);+#10587 = LINE('',#10588,#10589);+#10588 = CARTESIAN_POINT('',(0.7175,-0.15));+#10589 = VECTOR('',#10590,1.);+#10590 = DIRECTION('',(0.,1.));+#10591 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10592 = ORIENTED_EDGE('',*,*,#10593,.T.);+#10593 = EDGE_CURVE('',#10564,#10488,#10594,.T.);+#10594 = SURFACE_CURVE('',#10595,(#10599,#10606),.PCURVE_S1.);+#10595 = LINE('',#10596,#10597);+#10596 = CARTESIAN_POINT('',(2.4875,0.175,0.));+#10597 = VECTOR('',#10598,1.);+#10598 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#10599 = PCURVE('',#10548,#10600);+#10600 = DEFINITIONAL_REPRESENTATION('',(#10601),#10605);+#10601 = LINE('',#10602,#10603);+#10602 = CARTESIAN_POINT('',(0.,-0.15));+#10603 = VECTOR('',#10604,1.);+#10604 = DIRECTION('',(1.,0.));+#10605 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10606 = PCURVE('',#10314,#10607);+#10607 = DEFINITIONAL_REPRESENTATION('',(#10608),#10612);+#10608 = LINE('',#10609,#10610);+#10609 = CARTESIAN_POINT('',(-0.217942023204,-0.146682274245));+#10610 = VECTOR('',#10611,1.);+#10611 = DIRECTION('',(0.839949759337,-0.542664170358));+#10612 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10613 = ORIENTED_EDGE('',*,*,#10534,.F.);+#10614 = ORIENTED_EDGE('',*,*,#10615,.F.);+#10615 = EDGE_CURVE('',#10566,#10512,#10616,.T.);+#10616 = SURFACE_CURVE('',#10617,(#10621,#10628),.PCURVE_S1.);+#10617 = LINE('',#10618,#10619);+#10618 = CARTESIAN_POINT('',(2.4875,0.475,0.));+#10619 = VECTOR('',#10620,1.);+#10620 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#10621 = PCURVE('',#10548,#10622);+#10622 = DEFINITIONAL_REPRESENTATION('',(#10623),#10627);+#10623 = LINE('',#10624,#10625);+#10624 = CARTESIAN_POINT('',(0.,0.15));+#10625 = VECTOR('',#10626,1.);+#10626 = DIRECTION('',(1.,0.));+#10627 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10628 = PCURVE('',#10370,#10629);+#10629 = DEFINITIONAL_REPRESENTATION('',(#10630),#10634);+#10630 = LINE('',#10631,#10632);+#10631 = CARTESIAN_POINT('',(-0.217942023204,-0.146682274245));+#10632 = VECTOR('',#10633,1.);+#10633 = DIRECTION('',(0.839949759337,-0.542664170358));+#10634 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10635 = ADVANCED_FACE('',(#10636),#10581,.T.);+#10636 = FACE_BOUND('',#10637,.T.);+#10637 = EDGE_LOOP('',(#10638,#10668,#10689,#10690));+#10638 = ORIENTED_EDGE('',*,*,#10639,.F.);+#10639 = EDGE_CURVE('',#10640,#10642,#10644,.T.);+#10640 = VERTEX_POINT('',#10641);+#10641 = CARTESIAN_POINT('',(3.205,0.175,0.));+#10642 = VERTEX_POINT('',#10643);+#10643 = CARTESIAN_POINT('',(3.205,0.475,0.));+#10644 = SURFACE_CURVE('',#10645,(#10649,#10656),.PCURVE_S1.);+#10645 = LINE('',#10646,#10647);+#10646 = CARTESIAN_POINT('',(3.205,0.175,0.));+#10647 = VECTOR('',#10648,1.);+#10648 = DIRECTION('',(0.,1.,0.));+#10649 = PCURVE('',#10581,#10650);+#10650 = DEFINITIONAL_REPRESENTATION('',(#10651),#10655);+#10651 = LINE('',#10652,#10653);+#10652 = CARTESIAN_POINT('',(0.,-0.15));+#10653 = VECTOR('',#10654,1.);+#10654 = DIRECTION('',(0.,1.));+#10655 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10656 = PCURVE('',#10657,#10662);+#10657 = PLANE('',#10658);+#10658 = AXIS2_PLACEMENT_3D('',#10659,#10660,#10661);+#10659 = CARTESIAN_POINT('',(3.205,0.325,0.15));+#10660 = DIRECTION('',(1.,0.,0.));+#10661 = DIRECTION('',(0.,0.,-1.));+#10662 = DEFINITIONAL_REPRESENTATION('',(#10663),#10667);+#10663 = LINE('',#10664,#10665);+#10664 = CARTESIAN_POINT('',(0.15,-0.15));+#10665 = VECTOR('',#10666,1.);+#10666 = DIRECTION('',(0.,1.));+#10667 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10668 = ORIENTED_EDGE('',*,*,#10669,.T.);+#10669 = EDGE_CURVE('',#10640,#10564,#10670,.T.);+#10670 = SURFACE_CURVE('',#10671,(#10675,#10682),.PCURVE_S1.);+#10671 = LINE('',#10672,#10673);+#10672 = CARTESIAN_POINT('',(3.205,0.175,0.));+#10673 = VECTOR('',#10674,1.);+#10674 = DIRECTION('',(-1.,0.,0.));+#10675 = PCURVE('',#10581,#10676);+#10676 = DEFINITIONAL_REPRESENTATION('',(#10677),#10681);+#10677 = LINE('',#10678,#10679);+#10678 = CARTESIAN_POINT('',(0.,-0.15));+#10679 = VECTOR('',#10680,1.);+#10680 = DIRECTION('',(1.,0.));+#10681 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10682 = PCURVE('',#10314,#10683);+#10683 = DEFINITIONAL_REPRESENTATION('',(#10684),#10688);+#10684 = LINE('',#10685,#10686);+#10685 = CARTESIAN_POINT('',(-0.217942023204,0.570817725755));+#10686 = VECTOR('',#10687,1.);+#10687 = DIRECTION('',(0.,-1.));+#10688 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10689 = ORIENTED_EDGE('',*,*,#10563,.T.);+#10690 = ORIENTED_EDGE('',*,*,#10691,.F.);+#10691 = EDGE_CURVE('',#10642,#10566,#10692,.T.);+#10692 = SURFACE_CURVE('',#10693,(#10697,#10704),.PCURVE_S1.);+#10693 = LINE('',#10694,#10695);+#10694 = CARTESIAN_POINT('',(3.205,0.475,0.));+#10695 = VECTOR('',#10696,1.);+#10696 = DIRECTION('',(-1.,0.,0.));+#10697 = PCURVE('',#10581,#10698);+#10698 = DEFINITIONAL_REPRESENTATION('',(#10699),#10703);+#10699 = LINE('',#10700,#10701);+#10700 = CARTESIAN_POINT('',(0.,0.15));+#10701 = VECTOR('',#10702,1.);+#10702 = DIRECTION('',(1.,0.));+#10703 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10704 = PCURVE('',#10370,#10705);+#10705 = DEFINITIONAL_REPRESENTATION('',(#10706),#10710);+#10706 = LINE('',#10707,#10708);+#10707 = CARTESIAN_POINT('',(-0.217942023204,0.570817725755));+#10708 = VECTOR('',#10709,1.);+#10709 = DIRECTION('',(0.,-1.));+#10710 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10711 = ADVANCED_FACE('',(#10712),#10657,.T.);+#10712 = FACE_BOUND('',#10713,.T.);+#10713 = EDGE_LOOP('',(#10714,#10744,#10765,#10766));+#10714 = ORIENTED_EDGE('',*,*,#10715,.F.);+#10715 = EDGE_CURVE('',#10716,#10718,#10720,.T.);+#10716 = VERTEX_POINT('',#10717);+#10717 = CARTESIAN_POINT('',(3.205,0.175,0.15));+#10718 = VERTEX_POINT('',#10719);+#10719 = CARTESIAN_POINT('',(3.205,0.475,0.15));+#10720 = SURFACE_CURVE('',#10721,(#10725,#10732),.PCURVE_S1.);+#10721 = LINE('',#10722,#10723);+#10722 = CARTESIAN_POINT('',(3.205,0.175,0.15));+#10723 = VECTOR('',#10724,1.);+#10724 = DIRECTION('',(0.,1.,0.));+#10725 = PCURVE('',#10657,#10726);+#10726 = DEFINITIONAL_REPRESENTATION('',(#10727),#10731);+#10727 = LINE('',#10728,#10729);+#10728 = CARTESIAN_POINT('',(0.,-0.15));+#10729 = VECTOR('',#10730,1.);+#10730 = DIRECTION('',(0.,1.));+#10731 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10732 = PCURVE('',#10733,#10738);+#10733 = PLANE('',#10734);+#10734 = AXIS2_PLACEMENT_3D('',#10735,#10736,#10737);+#10735 = CARTESIAN_POINT('',(2.6375,0.325,0.15));+#10736 = DIRECTION('',(0.,0.,1.));+#10737 = DIRECTION('',(1.,0.,0.));+#10738 = DEFINITIONAL_REPRESENTATION('',(#10739),#10743);+#10739 = LINE('',#10740,#10741);+#10740 = CARTESIAN_POINT('',(0.5675,-0.15));+#10741 = VECTOR('',#10742,1.);+#10742 = DIRECTION('',(0.,1.));+#10743 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10744 = ORIENTED_EDGE('',*,*,#10745,.T.);+#10745 = EDGE_CURVE('',#10716,#10640,#10746,.T.);+#10746 = SURFACE_CURVE('',#10747,(#10751,#10758),.PCURVE_S1.);+#10747 = LINE('',#10748,#10749);+#10748 = CARTESIAN_POINT('',(3.205,0.175,0.15));+#10749 = VECTOR('',#10750,1.);+#10750 = DIRECTION('',(0.,0.,-1.));+#10751 = PCURVE('',#10657,#10752);+#10752 = DEFINITIONAL_REPRESENTATION('',(#10753),#10757);+#10753 = LINE('',#10754,#10755);+#10754 = CARTESIAN_POINT('',(0.,-0.15));+#10755 = VECTOR('',#10756,1.);+#10756 = DIRECTION('',(1.,0.));+#10757 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10758 = PCURVE('',#10314,#10759);+#10759 = DEFINITIONAL_REPRESENTATION('',(#10760),#10764);+#10760 = LINE('',#10761,#10762);+#10761 = CARTESIAN_POINT('',(-6.7942023204E-02,0.570817725755));+#10762 = VECTOR('',#10763,1.);+#10763 = DIRECTION('',(-1.,0.));+#10764 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10765 = ORIENTED_EDGE('',*,*,#10639,.T.);+#10766 = ORIENTED_EDGE('',*,*,#10767,.F.);+#10767 = EDGE_CURVE('',#10718,#10642,#10768,.T.);+#10768 = SURFACE_CURVE('',#10769,(#10773,#10780),.PCURVE_S1.);+#10769 = LINE('',#10770,#10771);+#10770 = CARTESIAN_POINT('',(3.205,0.475,0.15));+#10771 = VECTOR('',#10772,1.);+#10772 = DIRECTION('',(0.,0.,-1.));+#10773 = PCURVE('',#10657,#10774);+#10774 = DEFINITIONAL_REPRESENTATION('',(#10775),#10779);+#10775 = LINE('',#10776,#10777);+#10776 = CARTESIAN_POINT('',(0.,0.15));+#10777 = VECTOR('',#10778,1.);+#10778 = DIRECTION('',(1.,0.));+#10779 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10780 = PCURVE('',#10370,#10781);+#10781 = DEFINITIONAL_REPRESENTATION('',(#10782),#10786);+#10782 = LINE('',#10783,#10784);+#10783 = CARTESIAN_POINT('',(-6.7942023204E-02,0.570817725755));+#10784 = VECTOR('',#10785,1.);+#10785 = DIRECTION('',(-1.,0.));+#10786 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10787 = ADVANCED_FACE('',(#10788),#10733,.T.);+#10788 = FACE_BOUND('',#10789,.T.);+#10789 = EDGE_LOOP('',(#10790,#10815,#10836,#10837));+#10790 = ORIENTED_EDGE('',*,*,#10791,.F.);+#10791 = EDGE_CURVE('',#10792,#10794,#10796,.T.);+#10792 = VERTEX_POINT('',#10793);+#10793 = CARTESIAN_POINT('',(2.6375,0.175,0.15));+#10794 = VERTEX_POINT('',#10795);+#10795 = CARTESIAN_POINT('',(2.6375,0.475,0.15));+#10796 = SURFACE_CURVE('',#10797,(#10801,#10808),.PCURVE_S1.);+#10797 = LINE('',#10798,#10799);+#10798 = CARTESIAN_POINT('',(2.6375,0.175,0.15));+#10799 = VECTOR('',#10800,1.);+#10800 = DIRECTION('',(0.,1.,0.));+#10801 = PCURVE('',#10733,#10802);+#10802 = DEFINITIONAL_REPRESENTATION('',(#10803),#10807);+#10803 = LINE('',#10804,#10805);+#10804 = CARTESIAN_POINT('',(0.,-0.15));+#10805 = VECTOR('',#10806,1.);+#10806 = DIRECTION('',(0.,1.));+#10807 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10808 = PCURVE('',#10342,#10809);+#10809 = DEFINITIONAL_REPRESENTATION('',(#10810),#10814);+#10810 = LINE('',#10811,#10812);+#10811 = CARTESIAN_POINT('',(0.529793591883,-0.15));+#10812 = VECTOR('',#10813,1.);+#10813 = DIRECTION('',(0.,1.));+#10814 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10815 = ORIENTED_EDGE('',*,*,#10816,.T.);+#10816 = EDGE_CURVE('',#10792,#10716,#10817,.T.);+#10817 = SURFACE_CURVE('',#10818,(#10822,#10829),.PCURVE_S1.);+#10818 = LINE('',#10819,#10820);+#10819 = CARTESIAN_POINT('',(2.6375,0.175,0.15));+#10820 = VECTOR('',#10821,1.);+#10821 = DIRECTION('',(1.,0.,0.));+#10822 = PCURVE('',#10733,#10823);+#10823 = DEFINITIONAL_REPRESENTATION('',(#10824),#10828);+#10824 = LINE('',#10825,#10826);+#10825 = CARTESIAN_POINT('',(0.,-0.15));+#10826 = VECTOR('',#10827,1.);+#10827 = DIRECTION('',(1.,0.));+#10828 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10829 = PCURVE('',#10314,#10830);+#10830 = DEFINITIONAL_REPRESENTATION('',(#10831),#10835);+#10831 = LINE('',#10832,#10833);+#10832 = CARTESIAN_POINT('',(-6.7942023204E-02,3.317725755E-03));+#10833 = VECTOR('',#10834,1.);+#10834 = DIRECTION('',(0.,1.));+#10835 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10836 = ORIENTED_EDGE('',*,*,#10715,.T.);+#10837 = ORIENTED_EDGE('',*,*,#10838,.F.);+#10838 = EDGE_CURVE('',#10794,#10718,#10839,.T.);+#10839 = SURFACE_CURVE('',#10840,(#10844,#10851),.PCURVE_S1.);+#10840 = LINE('',#10841,#10842);+#10841 = CARTESIAN_POINT('',(2.6375,0.475,0.15));+#10842 = VECTOR('',#10843,1.);+#10843 = DIRECTION('',(1.,0.,0.));+#10844 = PCURVE('',#10733,#10845);+#10845 = DEFINITIONAL_REPRESENTATION('',(#10846),#10850);+#10846 = LINE('',#10847,#10848);+#10847 = CARTESIAN_POINT('',(0.,0.15));+#10848 = VECTOR('',#10849,1.);+#10849 = DIRECTION('',(1.,0.));+#10850 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10851 = PCURVE('',#10370,#10852);+#10852 = DEFINITIONAL_REPRESENTATION('',(#10853),#10857);+#10853 = LINE('',#10854,#10855);+#10854 = CARTESIAN_POINT('',(-6.7942023204E-02,3.317725755E-03));+#10855 = VECTOR('',#10856,1.);+#10856 = DIRECTION('',(0.,1.));+#10857 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10858 = ADVANCED_FACE('',(#10859),#10370,.T.);+#10859 = FACE_BOUND('',#10860,.T.);+#10860 = EDGE_LOOP('',(#10861,#10862,#10883,#10884,#10885,#10886,#10887,+ #10888));+#10861 = ORIENTED_EDGE('',*,*,#10354,.T.);+#10862 = ORIENTED_EDGE('',*,*,#10863,.T.);+#10863 = EDGE_CURVE('',#10327,#10794,#10864,.T.);+#10864 = SURFACE_CURVE('',#10865,(#10869,#10876),.PCURVE_S1.);+#10865 = LINE('',#10866,#10867);+#10866 = CARTESIAN_POINT('',(2.35,0.475,0.595));+#10867 = VECTOR('',#10868,1.);+#10868 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#10869 = PCURVE('',#10370,#10870);+#10870 = DEFINITIONAL_REPRESENTATION('',(#10871),#10875);+#10871 = LINE('',#10872,#10873);+#10872 = CARTESIAN_POINT('',(0.377057976796,-0.284182274245));+#10873 = VECTOR('',#10874,1.);+#10874 = DIRECTION('',(-0.839949759337,0.542664170358));+#10875 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10876 = PCURVE('',#10342,#10877);+#10877 = DEFINITIONAL_REPRESENTATION('',(#10878),#10882);+#10878 = LINE('',#10879,#10880);+#10879 = CARTESIAN_POINT('',(0.,0.15));+#10880 = VECTOR('',#10881,1.);+#10881 = DIRECTION('',(1.,0.));+#10882 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10883 = ORIENTED_EDGE('',*,*,#10838,.T.);+#10884 = ORIENTED_EDGE('',*,*,#10767,.T.);+#10885 = ORIENTED_EDGE('',*,*,#10691,.T.);+#10886 = ORIENTED_EDGE('',*,*,#10615,.T.);+#10887 = ORIENTED_EDGE('',*,*,#10511,.T.);+#10888 = ORIENTED_EDGE('',*,*,#10435,.T.);+#10889 = ADVANCED_FACE('',(#10890),#10342,.T.);+#10890 = FACE_BOUND('',#10891,.T.);+#10891 = EDGE_LOOP('',(#10892,#10893,#10914,#10915));+#10892 = ORIENTED_EDGE('',*,*,#10326,.F.);+#10893 = ORIENTED_EDGE('',*,*,#10894,.T.);+#10894 = EDGE_CURVE('',#10294,#10792,#10895,.T.);+#10895 = SURFACE_CURVE('',#10896,(#10900,#10907),.PCURVE_S1.);+#10896 = LINE('',#10897,#10898);+#10897 = CARTESIAN_POINT('',(2.35,0.175,0.595));+#10898 = VECTOR('',#10899,1.);+#10899 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#10900 = PCURVE('',#10342,#10901);+#10901 = DEFINITIONAL_REPRESENTATION('',(#10902),#10906);+#10902 = LINE('',#10903,#10904);+#10903 = CARTESIAN_POINT('',(0.,-0.15));+#10904 = VECTOR('',#10905,1.);+#10905 = DIRECTION('',(1.,0.));+#10906 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10907 = PCURVE('',#10314,#10908);+#10908 = DEFINITIONAL_REPRESENTATION('',(#10909),#10913);+#10909 = LINE('',#10910,#10911);+#10910 = CARTESIAN_POINT('',(0.377057976796,-0.284182274245));+#10911 = VECTOR('',#10912,1.);+#10912 = DIRECTION('',(-0.839949759337,0.542664170358));+#10913 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10914 = ORIENTED_EDGE('',*,*,#10791,.T.);+#10915 = ORIENTED_EDGE('',*,*,#10863,.F.);+#10916 = ADVANCED_FACE('',(#10917),#10314,.F.);+#10917 = FACE_BOUND('',#10918,.F.);+#10918 = EDGE_LOOP('',(#10919,#10920,#10921,#10922,#10923,#10924,#10925,+ #10926));+#10919 = ORIENTED_EDGE('',*,*,#10291,.T.);+#10920 = ORIENTED_EDGE('',*,*,#10894,.T.);+#10921 = ORIENTED_EDGE('',*,*,#10816,.T.);+#10922 = ORIENTED_EDGE('',*,*,#10745,.T.);+#10923 = ORIENTED_EDGE('',*,*,#10669,.T.);+#10924 = ORIENTED_EDGE('',*,*,#10593,.T.);+#10925 = ORIENTED_EDGE('',*,*,#10487,.T.);+#10926 = ORIENTED_EDGE('',*,*,#10411,.T.);+#10927 = MANIFOLD_SOLID_BREP('',#10928);+#10928 = CLOSED_SHELL('',(#10929,#11049,#11125,#11201,#11277,#11353,+ #11429,#11500,#11531,#11558));+#10929 = ADVANCED_FACE('',(#10930),#10944,.T.);+#10930 = FACE_BOUND('',#10931,.T.);+#10931 = EDGE_LOOP('',(#10932,#10967,#10995,#11023));+#10932 = ORIENTED_EDGE('',*,*,#10933,.T.);+#10933 = EDGE_CURVE('',#10934,#10936,#10938,.T.);+#10934 = VERTEX_POINT('',#10935);+#10935 = CARTESIAN_POINT('',(2.15,0.825,0.595));+#10936 = VERTEX_POINT('',#10937);+#10937 = CARTESIAN_POINT('',(2.35,0.825,0.595));+#10938 = SURFACE_CURVE('',#10939,(#10943,#10955),.PCURVE_S1.);+#10939 = LINE('',#10940,#10941);+#10940 = CARTESIAN_POINT('',(2.15,0.825,0.595));+#10941 = VECTOR('',#10942,1.);+#10942 = DIRECTION('',(1.,0.,0.));+#10943 = PCURVE('',#10944,#10949);+#10944 = PLANE('',#10945);+#10945 = AXIS2_PLACEMENT_3D('',#10946,#10947,#10948);+#10946 = CARTESIAN_POINT('',(2.15,0.975,0.595));+#10947 = DIRECTION('',(0.,0.,1.));+#10948 = DIRECTION('',(1.,0.,0.));+#10949 = DEFINITIONAL_REPRESENTATION('',(#10950),#10954);+#10950 = LINE('',#10951,#10952);+#10951 = CARTESIAN_POINT('',(0.,-0.15));+#10952 = VECTOR('',#10953,1.);+#10953 = DIRECTION('',(1.,0.));+#10954 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10955 = PCURVE('',#10956,#10961);+#10956 = PLANE('',#10957);+#10957 = AXIS2_PLACEMENT_3D('',#10958,#10959,#10960);+#10958 = CARTESIAN_POINT('',(2.634182274245,0.825,0.217942023204));+#10959 = DIRECTION('',(0.,1.,0.));+#10960 = DIRECTION('',(0.,0.,1.));+#10961 = DEFINITIONAL_REPRESENTATION('',(#10962),#10966);+#10962 = LINE('',#10963,#10964);+#10963 = CARTESIAN_POINT('',(0.377057976796,-0.484182274245));+#10964 = VECTOR('',#10965,1.);+#10965 = DIRECTION('',(0.,1.));+#10966 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10967 = ORIENTED_EDGE('',*,*,#10968,.T.);+#10968 = EDGE_CURVE('',#10936,#10969,#10971,.T.);+#10969 = VERTEX_POINT('',#10970);+#10970 = CARTESIAN_POINT('',(2.35,1.125,0.595));+#10971 = SURFACE_CURVE('',#10972,(#10976,#10983),.PCURVE_S1.);+#10972 = LINE('',#10973,#10974);+#10973 = CARTESIAN_POINT('',(2.35,0.825,0.595));+#10974 = VECTOR('',#10975,1.);+#10975 = DIRECTION('',(0.,1.,0.));+#10976 = PCURVE('',#10944,#10977);+#10977 = DEFINITIONAL_REPRESENTATION('',(#10978),#10982);+#10978 = LINE('',#10979,#10980);+#10979 = CARTESIAN_POINT('',(0.2,-0.15));+#10980 = VECTOR('',#10981,1.);+#10981 = DIRECTION('',(0.,1.));+#10982 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10983 = PCURVE('',#10984,#10989);+#10984 = PLANE('',#10985);+#10985 = AXIS2_PLACEMENT_3D('',#10986,#10987,#10988);+#10986 = CARTESIAN_POINT('',(2.35,0.975,0.595));+#10987 = DIRECTION('',(0.839949759337,0.,0.542664170358));+#10988 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#10989 = DEFINITIONAL_REPRESENTATION('',(#10990),#10994);+#10990 = LINE('',#10991,#10992);+#10991 = CARTESIAN_POINT('',(0.,-0.15));+#10992 = VECTOR('',#10993,1.);+#10993 = DIRECTION('',(0.,1.));+#10994 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10995 = ORIENTED_EDGE('',*,*,#10996,.F.);+#10996 = EDGE_CURVE('',#10997,#10969,#10999,.T.);+#10997 = VERTEX_POINT('',#10998);+#10998 = CARTESIAN_POINT('',(2.15,1.125,0.595));+#10999 = SURFACE_CURVE('',#11000,(#11004,#11011),.PCURVE_S1.);+#11000 = LINE('',#11001,#11002);+#11001 = CARTESIAN_POINT('',(2.15,1.125,0.595));+#11002 = VECTOR('',#11003,1.);+#11003 = DIRECTION('',(1.,0.,0.));+#11004 = PCURVE('',#10944,#11005);+#11005 = DEFINITIONAL_REPRESENTATION('',(#11006),#11010);+#11006 = LINE('',#11007,#11008);+#11007 = CARTESIAN_POINT('',(0.,0.15));+#11008 = VECTOR('',#11009,1.);+#11009 = DIRECTION('',(1.,0.));+#11010 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11011 = PCURVE('',#11012,#11017);+#11012 = PLANE('',#11013);+#11013 = AXIS2_PLACEMENT_3D('',#11014,#11015,#11016);+#11014 = CARTESIAN_POINT('',(2.634182274245,1.125,0.217942023204));+#11015 = DIRECTION('',(0.,1.,0.));+#11016 = DIRECTION('',(0.,0.,1.));+#11017 = DEFINITIONAL_REPRESENTATION('',(#11018),#11022);+#11018 = LINE('',#11019,#11020);+#11019 = CARTESIAN_POINT('',(0.377057976796,-0.484182274245));+#11020 = VECTOR('',#11021,1.);+#11021 = DIRECTION('',(0.,1.));+#11022 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11023 = ORIENTED_EDGE('',*,*,#11024,.T.);+#11024 = EDGE_CURVE('',#10997,#10934,#11025,.T.);+#11025 = SURFACE_CURVE('',#11026,(#11030,#11037),.PCURVE_S1.);+#11026 = LINE('',#11027,#11028);+#11027 = CARTESIAN_POINT('',(2.15,1.125,0.595));+#11028 = VECTOR('',#11029,1.);+#11029 = DIRECTION('',(0.,-1.,0.));+#11030 = PCURVE('',#10944,#11031);+#11031 = DEFINITIONAL_REPRESENTATION('',(#11032),#11036);+#11032 = LINE('',#11033,#11034);+#11033 = CARTESIAN_POINT('',(0.,0.15));+#11034 = VECTOR('',#11035,1.);+#11035 = DIRECTION('',(0.,-1.));+#11036 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11037 = PCURVE('',#11038,#11043);+#11038 = PLANE('',#11039);+#11039 = AXIS2_PLACEMENT_3D('',#11040,#11041,#11042);+#11040 = CARTESIAN_POINT('',(2.15,0.975,0.445));+#11041 = DIRECTION('',(-1.,0.,0.));+#11042 = DIRECTION('',(0.,0.,1.));+#11043 = DEFINITIONAL_REPRESENTATION('',(#11044),#11048);+#11044 = LINE('',#11045,#11046);+#11045 = CARTESIAN_POINT('',(0.15,0.15));+#11046 = VECTOR('',#11047,1.);+#11047 = DIRECTION('',(0.,-1.));+#11048 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11049 = ADVANCED_FACE('',(#11050),#11038,.T.);+#11050 = FACE_BOUND('',#11051,.T.);+#11051 = EDGE_LOOP('',(#11052,#11075,#11076,#11099));+#11052 = ORIENTED_EDGE('',*,*,#11053,.T.);+#11053 = EDGE_CURVE('',#11054,#10934,#11056,.T.);+#11054 = VERTEX_POINT('',#11055);+#11055 = CARTESIAN_POINT('',(2.15,0.825,0.445));+#11056 = SURFACE_CURVE('',#11057,(#11061,#11068),.PCURVE_S1.);+#11057 = LINE('',#11058,#11059);+#11058 = CARTESIAN_POINT('',(2.15,0.825,0.445));+#11059 = VECTOR('',#11060,1.);+#11060 = DIRECTION('',(0.,0.,1.));+#11061 = PCURVE('',#11038,#11062);+#11062 = DEFINITIONAL_REPRESENTATION('',(#11063),#11067);+#11063 = LINE('',#11064,#11065);+#11064 = CARTESIAN_POINT('',(0.,-0.15));+#11065 = VECTOR('',#11066,1.);+#11066 = DIRECTION('',(1.,0.));+#11067 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11068 = PCURVE('',#10956,#11069);+#11069 = DEFINITIONAL_REPRESENTATION('',(#11070),#11074);+#11070 = LINE('',#11071,#11072);+#11071 = CARTESIAN_POINT('',(0.227057976796,-0.484182274245));+#11072 = VECTOR('',#11073,1.);+#11073 = DIRECTION('',(1.,0.));+#11074 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11075 = ORIENTED_EDGE('',*,*,#11024,.F.);+#11076 = ORIENTED_EDGE('',*,*,#11077,.F.);+#11077 = EDGE_CURVE('',#11078,#10997,#11080,.T.);+#11078 = VERTEX_POINT('',#11079);+#11079 = CARTESIAN_POINT('',(2.15,1.125,0.445));+#11080 = SURFACE_CURVE('',#11081,(#11085,#11092),.PCURVE_S1.);+#11081 = LINE('',#11082,#11083);+#11082 = CARTESIAN_POINT('',(2.15,1.125,0.445));+#11083 = VECTOR('',#11084,1.);+#11084 = DIRECTION('',(0.,0.,1.));+#11085 = PCURVE('',#11038,#11086);+#11086 = DEFINITIONAL_REPRESENTATION('',(#11087),#11091);+#11087 = LINE('',#11088,#11089);+#11088 = CARTESIAN_POINT('',(0.,0.15));+#11089 = VECTOR('',#11090,1.);+#11090 = DIRECTION('',(1.,0.));+#11091 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11092 = PCURVE('',#11012,#11093);+#11093 = DEFINITIONAL_REPRESENTATION('',(#11094),#11098);+#11094 = LINE('',#11095,#11096);+#11095 = CARTESIAN_POINT('',(0.227057976796,-0.484182274245));+#11096 = VECTOR('',#11097,1.);+#11097 = DIRECTION('',(1.,0.));+#11098 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11099 = ORIENTED_EDGE('',*,*,#11100,.T.);+#11100 = EDGE_CURVE('',#11078,#11054,#11101,.T.);+#11101 = SURFACE_CURVE('',#11102,(#11106,#11113),.PCURVE_S1.);+#11102 = LINE('',#11103,#11104);+#11103 = CARTESIAN_POINT('',(2.15,1.125,0.445));+#11104 = VECTOR('',#11105,1.);+#11105 = DIRECTION('',(0.,-1.,0.));+#11106 = PCURVE('',#11038,#11107);+#11107 = DEFINITIONAL_REPRESENTATION('',(#11108),#11112);+#11108 = LINE('',#11109,#11110);+#11109 = CARTESIAN_POINT('',(0.,0.15));+#11110 = VECTOR('',#11111,1.);+#11111 = DIRECTION('',(0.,-1.));+#11112 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11113 = PCURVE('',#11114,#11119);+#11114 = PLANE('',#11115);+#11115 = AXIS2_PLACEMENT_3D('',#11116,#11117,#11118);+#11116 = CARTESIAN_POINT('',(2.2,0.975,0.445));+#11117 = DIRECTION('',(-0.,-0.,-1.));+#11118 = DIRECTION('',(-1.,0.,0.));+#11119 = DEFINITIONAL_REPRESENTATION('',(#11120),#11124);+#11120 = LINE('',#11121,#11122);+#11121 = CARTESIAN_POINT('',(5.E-02,0.15));+#11122 = VECTOR('',#11123,1.);+#11123 = DIRECTION('',(0.,-1.));+#11124 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11125 = ADVANCED_FACE('',(#11126),#11114,.T.);+#11126 = FACE_BOUND('',#11127,.T.);+#11127 = EDGE_LOOP('',(#11128,#11151,#11152,#11175));+#11128 = ORIENTED_EDGE('',*,*,#11129,.T.);+#11129 = EDGE_CURVE('',#11130,#11054,#11132,.T.);+#11130 = VERTEX_POINT('',#11131);+#11131 = CARTESIAN_POINT('',(2.2,0.825,0.445));+#11132 = SURFACE_CURVE('',#11133,(#11137,#11144),.PCURVE_S1.);+#11133 = LINE('',#11134,#11135);+#11134 = CARTESIAN_POINT('',(2.2,0.825,0.445));+#11135 = VECTOR('',#11136,1.);+#11136 = DIRECTION('',(-1.,0.,0.));+#11137 = PCURVE('',#11114,#11138);+#11138 = DEFINITIONAL_REPRESENTATION('',(#11139),#11143);+#11139 = LINE('',#11140,#11141);+#11140 = CARTESIAN_POINT('',(0.,-0.15));+#11141 = VECTOR('',#11142,1.);+#11142 = DIRECTION('',(1.,0.));+#11143 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11144 = PCURVE('',#10956,#11145);+#11145 = DEFINITIONAL_REPRESENTATION('',(#11146),#11150);+#11146 = LINE('',#11147,#11148);+#11147 = CARTESIAN_POINT('',(0.227057976796,-0.434182274245));+#11148 = VECTOR('',#11149,1.);+#11149 = DIRECTION('',(0.,-1.));+#11150 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11151 = ORIENTED_EDGE('',*,*,#11100,.F.);+#11152 = ORIENTED_EDGE('',*,*,#11153,.F.);+#11153 = EDGE_CURVE('',#11154,#11078,#11156,.T.);+#11154 = VERTEX_POINT('',#11155);+#11155 = CARTESIAN_POINT('',(2.2,1.125,0.445));+#11156 = SURFACE_CURVE('',#11157,(#11161,#11168),.PCURVE_S1.);+#11157 = LINE('',#11158,#11159);+#11158 = CARTESIAN_POINT('',(2.2,1.125,0.445));+#11159 = VECTOR('',#11160,1.);+#11160 = DIRECTION('',(-1.,0.,0.));+#11161 = PCURVE('',#11114,#11162);+#11162 = DEFINITIONAL_REPRESENTATION('',(#11163),#11167);+#11163 = LINE('',#11164,#11165);+#11164 = CARTESIAN_POINT('',(0.,0.15));+#11165 = VECTOR('',#11166,1.);+#11166 = DIRECTION('',(1.,0.));+#11167 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11168 = PCURVE('',#11012,#11169);+#11169 = DEFINITIONAL_REPRESENTATION('',(#11170),#11174);+#11170 = LINE('',#11171,#11172);+#11171 = CARTESIAN_POINT('',(0.227057976796,-0.434182274245));+#11172 = VECTOR('',#11173,1.);+#11173 = DIRECTION('',(0.,-1.));+#11174 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11175 = ORIENTED_EDGE('',*,*,#11176,.T.);+#11176 = EDGE_CURVE('',#11154,#11130,#11177,.T.);+#11177 = SURFACE_CURVE('',#11178,(#11182,#11189),.PCURVE_S1.);+#11178 = LINE('',#11179,#11180);+#11179 = CARTESIAN_POINT('',(2.2,1.125,0.445));+#11180 = VECTOR('',#11181,1.);+#11181 = DIRECTION('',(0.,-1.,0.));+#11182 = PCURVE('',#11114,#11183);+#11183 = DEFINITIONAL_REPRESENTATION('',(#11184),#11188);+#11184 = LINE('',#11185,#11186);+#11185 = CARTESIAN_POINT('',(0.,0.15));+#11186 = VECTOR('',#11187,1.);+#11187 = DIRECTION('',(0.,-1.));+#11188 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11189 = PCURVE('',#11190,#11195);+#11190 = PLANE('',#11191);+#11191 = AXIS2_PLACEMENT_3D('',#11192,#11193,#11194);+#11192 = CARTESIAN_POINT('',(2.4875,0.975,0.));+#11193 = DIRECTION('',(-0.839949759337,-0.,-0.542664170358));+#11194 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#11195 = DEFINITIONAL_REPRESENTATION('',(#11196),#11200);+#11196 = LINE('',#11197,#11198);+#11197 = CARTESIAN_POINT('',(0.529793591883,0.15));+#11198 = VECTOR('',#11199,1.);+#11199 = DIRECTION('',(0.,-1.));+#11200 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11201 = ADVANCED_FACE('',(#11202),#11190,.T.);+#11202 = FACE_BOUND('',#11203,.T.);+#11203 = EDGE_LOOP('',(#11204,#11234,#11255,#11256));+#11204 = ORIENTED_EDGE('',*,*,#11205,.F.);+#11205 = EDGE_CURVE('',#11206,#11208,#11210,.T.);+#11206 = VERTEX_POINT('',#11207);+#11207 = CARTESIAN_POINT('',(2.4875,0.825,0.));+#11208 = VERTEX_POINT('',#11209);+#11209 = CARTESIAN_POINT('',(2.4875,1.125,0.));+#11210 = SURFACE_CURVE('',#11211,(#11215,#11222),.PCURVE_S1.);+#11211 = LINE('',#11212,#11213);+#11212 = CARTESIAN_POINT('',(2.4875,0.825,0.));+#11213 = VECTOR('',#11214,1.);+#11214 = DIRECTION('',(0.,1.,0.));+#11215 = PCURVE('',#11190,#11216);+#11216 = DEFINITIONAL_REPRESENTATION('',(#11217),#11221);+#11217 = LINE('',#11218,#11219);+#11218 = CARTESIAN_POINT('',(0.,-0.15));+#11219 = VECTOR('',#11220,1.);+#11220 = DIRECTION('',(0.,1.));+#11221 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11222 = PCURVE('',#11223,#11228);+#11223 = PLANE('',#11224);+#11224 = AXIS2_PLACEMENT_3D('',#11225,#11226,#11227);+#11225 = CARTESIAN_POINT('',(3.205,0.975,0.));+#11226 = DIRECTION('',(-0.,-0.,-1.));+#11227 = DIRECTION('',(-1.,0.,0.));+#11228 = DEFINITIONAL_REPRESENTATION('',(#11229),#11233);+#11229 = LINE('',#11230,#11231);+#11230 = CARTESIAN_POINT('',(0.7175,-0.15));+#11231 = VECTOR('',#11232,1.);+#11232 = DIRECTION('',(0.,1.));+#11233 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11234 = ORIENTED_EDGE('',*,*,#11235,.T.);+#11235 = EDGE_CURVE('',#11206,#11130,#11236,.T.);+#11236 = SURFACE_CURVE('',#11237,(#11241,#11248),.PCURVE_S1.);+#11237 = LINE('',#11238,#11239);+#11238 = CARTESIAN_POINT('',(2.4875,0.825,0.));+#11239 = VECTOR('',#11240,1.);+#11240 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#11241 = PCURVE('',#11190,#11242);+#11242 = DEFINITIONAL_REPRESENTATION('',(#11243),#11247);+#11243 = LINE('',#11244,#11245);+#11244 = CARTESIAN_POINT('',(0.,-0.15));+#11245 = VECTOR('',#11246,1.);+#11246 = DIRECTION('',(1.,0.));+#11247 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11248 = PCURVE('',#10956,#11249);+#11249 = DEFINITIONAL_REPRESENTATION('',(#11250),#11254);+#11250 = LINE('',#11251,#11252);+#11251 = CARTESIAN_POINT('',(-0.217942023204,-0.146682274245));+#11252 = VECTOR('',#11253,1.);+#11253 = DIRECTION('',(0.839949759337,-0.542664170358));+#11254 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11255 = ORIENTED_EDGE('',*,*,#11176,.F.);+#11256 = ORIENTED_EDGE('',*,*,#11257,.F.);+#11257 = EDGE_CURVE('',#11208,#11154,#11258,.T.);+#11258 = SURFACE_CURVE('',#11259,(#11263,#11270),.PCURVE_S1.);+#11259 = LINE('',#11260,#11261);+#11260 = CARTESIAN_POINT('',(2.4875,1.125,0.));+#11261 = VECTOR('',#11262,1.);+#11262 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#11263 = PCURVE('',#11190,#11264);+#11264 = DEFINITIONAL_REPRESENTATION('',(#11265),#11269);+#11265 = LINE('',#11266,#11267);+#11266 = CARTESIAN_POINT('',(0.,0.15));+#11267 = VECTOR('',#11268,1.);+#11268 = DIRECTION('',(1.,0.));+#11269 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11270 = PCURVE('',#11012,#11271);+#11271 = DEFINITIONAL_REPRESENTATION('',(#11272),#11276);+#11272 = LINE('',#11273,#11274);+#11273 = CARTESIAN_POINT('',(-0.217942023204,-0.146682274245));+#11274 = VECTOR('',#11275,1.);+#11275 = DIRECTION('',(0.839949759337,-0.542664170358));+#11276 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11277 = ADVANCED_FACE('',(#11278),#11223,.T.);+#11278 = FACE_BOUND('',#11279,.T.);+#11279 = EDGE_LOOP('',(#11280,#11310,#11331,#11332));+#11280 = ORIENTED_EDGE('',*,*,#11281,.F.);+#11281 = EDGE_CURVE('',#11282,#11284,#11286,.T.);+#11282 = VERTEX_POINT('',#11283);+#11283 = CARTESIAN_POINT('',(3.205,0.825,0.));+#11284 = VERTEX_POINT('',#11285);+#11285 = CARTESIAN_POINT('',(3.205,1.125,0.));+#11286 = SURFACE_CURVE('',#11287,(#11291,#11298),.PCURVE_S1.);+#11287 = LINE('',#11288,#11289);+#11288 = CARTESIAN_POINT('',(3.205,0.825,0.));+#11289 = VECTOR('',#11290,1.);+#11290 = DIRECTION('',(0.,1.,0.));+#11291 = PCURVE('',#11223,#11292);+#11292 = DEFINITIONAL_REPRESENTATION('',(#11293),#11297);+#11293 = LINE('',#11294,#11295);+#11294 = CARTESIAN_POINT('',(0.,-0.15));+#11295 = VECTOR('',#11296,1.);+#11296 = DIRECTION('',(0.,1.));+#11297 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11298 = PCURVE('',#11299,#11304);+#11299 = PLANE('',#11300);+#11300 = AXIS2_PLACEMENT_3D('',#11301,#11302,#11303);+#11301 = CARTESIAN_POINT('',(3.205,0.975,0.15));+#11302 = DIRECTION('',(1.,0.,0.));+#11303 = DIRECTION('',(0.,0.,-1.));+#11304 = DEFINITIONAL_REPRESENTATION('',(#11305),#11309);+#11305 = LINE('',#11306,#11307);+#11306 = CARTESIAN_POINT('',(0.15,-0.15));+#11307 = VECTOR('',#11308,1.);+#11308 = DIRECTION('',(0.,1.));+#11309 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11310 = ORIENTED_EDGE('',*,*,#11311,.T.);+#11311 = EDGE_CURVE('',#11282,#11206,#11312,.T.);+#11312 = SURFACE_CURVE('',#11313,(#11317,#11324),.PCURVE_S1.);+#11313 = LINE('',#11314,#11315);+#11314 = CARTESIAN_POINT('',(3.205,0.825,0.));+#11315 = VECTOR('',#11316,1.);+#11316 = DIRECTION('',(-1.,0.,0.));+#11317 = PCURVE('',#11223,#11318);+#11318 = DEFINITIONAL_REPRESENTATION('',(#11319),#11323);+#11319 = LINE('',#11320,#11321);+#11320 = CARTESIAN_POINT('',(0.,-0.15));+#11321 = VECTOR('',#11322,1.);+#11322 = DIRECTION('',(1.,0.));+#11323 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11324 = PCURVE('',#10956,#11325);+#11325 = DEFINITIONAL_REPRESENTATION('',(#11326),#11330);+#11326 = LINE('',#11327,#11328);+#11327 = CARTESIAN_POINT('',(-0.217942023204,0.570817725755));+#11328 = VECTOR('',#11329,1.);+#11329 = DIRECTION('',(0.,-1.));+#11330 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11331 = ORIENTED_EDGE('',*,*,#11205,.T.);+#11332 = ORIENTED_EDGE('',*,*,#11333,.F.);+#11333 = EDGE_CURVE('',#11284,#11208,#11334,.T.);+#11334 = SURFACE_CURVE('',#11335,(#11339,#11346),.PCURVE_S1.);+#11335 = LINE('',#11336,#11337);+#11336 = CARTESIAN_POINT('',(3.205,1.125,0.));+#11337 = VECTOR('',#11338,1.);+#11338 = DIRECTION('',(-1.,0.,0.));+#11339 = PCURVE('',#11223,#11340);+#11340 = DEFINITIONAL_REPRESENTATION('',(#11341),#11345);+#11341 = LINE('',#11342,#11343);+#11342 = CARTESIAN_POINT('',(0.,0.15));+#11343 = VECTOR('',#11344,1.);+#11344 = DIRECTION('',(1.,0.));+#11345 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11346 = PCURVE('',#11012,#11347);+#11347 = DEFINITIONAL_REPRESENTATION('',(#11348),#11352);+#11348 = LINE('',#11349,#11350);+#11349 = CARTESIAN_POINT('',(-0.217942023204,0.570817725755));+#11350 = VECTOR('',#11351,1.);+#11351 = DIRECTION('',(0.,-1.));+#11352 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11353 = ADVANCED_FACE('',(#11354),#11299,.T.);+#11354 = FACE_BOUND('',#11355,.T.);+#11355 = EDGE_LOOP('',(#11356,#11386,#11407,#11408));+#11356 = ORIENTED_EDGE('',*,*,#11357,.F.);+#11357 = EDGE_CURVE('',#11358,#11360,#11362,.T.);+#11358 = VERTEX_POINT('',#11359);+#11359 = CARTESIAN_POINT('',(3.205,0.825,0.15));+#11360 = VERTEX_POINT('',#11361);+#11361 = CARTESIAN_POINT('',(3.205,1.125,0.15));+#11362 = SURFACE_CURVE('',#11363,(#11367,#11374),.PCURVE_S1.);+#11363 = LINE('',#11364,#11365);+#11364 = CARTESIAN_POINT('',(3.205,0.825,0.15));+#11365 = VECTOR('',#11366,1.);+#11366 = DIRECTION('',(0.,1.,0.));+#11367 = PCURVE('',#11299,#11368);+#11368 = DEFINITIONAL_REPRESENTATION('',(#11369),#11373);+#11369 = LINE('',#11370,#11371);+#11370 = CARTESIAN_POINT('',(0.,-0.15));+#11371 = VECTOR('',#11372,1.);+#11372 = DIRECTION('',(0.,1.));+#11373 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11374 = PCURVE('',#11375,#11380);+#11375 = PLANE('',#11376);+#11376 = AXIS2_PLACEMENT_3D('',#11377,#11378,#11379);+#11377 = CARTESIAN_POINT('',(2.6375,0.975,0.15));+#11378 = DIRECTION('',(0.,0.,1.));+#11379 = DIRECTION('',(1.,0.,0.));+#11380 = DEFINITIONAL_REPRESENTATION('',(#11381),#11385);+#11381 = LINE('',#11382,#11383);+#11382 = CARTESIAN_POINT('',(0.5675,-0.15));+#11383 = VECTOR('',#11384,1.);+#11384 = DIRECTION('',(0.,1.));+#11385 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11386 = ORIENTED_EDGE('',*,*,#11387,.T.);+#11387 = EDGE_CURVE('',#11358,#11282,#11388,.T.);+#11388 = SURFACE_CURVE('',#11389,(#11393,#11400),.PCURVE_S1.);+#11389 = LINE('',#11390,#11391);+#11390 = CARTESIAN_POINT('',(3.205,0.825,0.15));+#11391 = VECTOR('',#11392,1.);+#11392 = DIRECTION('',(0.,0.,-1.));+#11393 = PCURVE('',#11299,#11394);+#11394 = DEFINITIONAL_REPRESENTATION('',(#11395),#11399);+#11395 = LINE('',#11396,#11397);+#11396 = CARTESIAN_POINT('',(0.,-0.15));+#11397 = VECTOR('',#11398,1.);+#11398 = DIRECTION('',(1.,0.));+#11399 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11400 = PCURVE('',#10956,#11401);+#11401 = DEFINITIONAL_REPRESENTATION('',(#11402),#11406);+#11402 = LINE('',#11403,#11404);+#11403 = CARTESIAN_POINT('',(-6.7942023204E-02,0.570817725755));+#11404 = VECTOR('',#11405,1.);+#11405 = DIRECTION('',(-1.,0.));+#11406 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11407 = ORIENTED_EDGE('',*,*,#11281,.T.);+#11408 = ORIENTED_EDGE('',*,*,#11409,.F.);+#11409 = EDGE_CURVE('',#11360,#11284,#11410,.T.);+#11410 = SURFACE_CURVE('',#11411,(#11415,#11422),.PCURVE_S1.);+#11411 = LINE('',#11412,#11413);+#11412 = CARTESIAN_POINT('',(3.205,1.125,0.15));+#11413 = VECTOR('',#11414,1.);+#11414 = DIRECTION('',(0.,0.,-1.));+#11415 = PCURVE('',#11299,#11416);+#11416 = DEFINITIONAL_REPRESENTATION('',(#11417),#11421);+#11417 = LINE('',#11418,#11419);+#11418 = CARTESIAN_POINT('',(0.,0.15));+#11419 = VECTOR('',#11420,1.);+#11420 = DIRECTION('',(1.,0.));+#11421 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11422 = PCURVE('',#11012,#11423);+#11423 = DEFINITIONAL_REPRESENTATION('',(#11424),#11428);+#11424 = LINE('',#11425,#11426);+#11425 = CARTESIAN_POINT('',(-6.7942023204E-02,0.570817725755));+#11426 = VECTOR('',#11427,1.);+#11427 = DIRECTION('',(-1.,0.));+#11428 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11429 = ADVANCED_FACE('',(#11430),#11375,.T.);+#11430 = FACE_BOUND('',#11431,.T.);+#11431 = EDGE_LOOP('',(#11432,#11457,#11478,#11479));+#11432 = ORIENTED_EDGE('',*,*,#11433,.F.);+#11433 = EDGE_CURVE('',#11434,#11436,#11438,.T.);+#11434 = VERTEX_POINT('',#11435);+#11435 = CARTESIAN_POINT('',(2.6375,0.825,0.15));+#11436 = VERTEX_POINT('',#11437);+#11437 = CARTESIAN_POINT('',(2.6375,1.125,0.15));+#11438 = SURFACE_CURVE('',#11439,(#11443,#11450),.PCURVE_S1.);+#11439 = LINE('',#11440,#11441);+#11440 = CARTESIAN_POINT('',(2.6375,0.825,0.15));+#11441 = VECTOR('',#11442,1.);+#11442 = DIRECTION('',(0.,1.,0.));+#11443 = PCURVE('',#11375,#11444);+#11444 = DEFINITIONAL_REPRESENTATION('',(#11445),#11449);+#11445 = LINE('',#11446,#11447);+#11446 = CARTESIAN_POINT('',(0.,-0.15));+#11447 = VECTOR('',#11448,1.);+#11448 = DIRECTION('',(0.,1.));+#11449 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11450 = PCURVE('',#10984,#11451);+#11451 = DEFINITIONAL_REPRESENTATION('',(#11452),#11456);+#11452 = LINE('',#11453,#11454);+#11453 = CARTESIAN_POINT('',(0.529793591883,-0.15));+#11454 = VECTOR('',#11455,1.);+#11455 = DIRECTION('',(0.,1.));+#11456 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11457 = ORIENTED_EDGE('',*,*,#11458,.T.);+#11458 = EDGE_CURVE('',#11434,#11358,#11459,.T.);+#11459 = SURFACE_CURVE('',#11460,(#11464,#11471),.PCURVE_S1.);+#11460 = LINE('',#11461,#11462);+#11461 = CARTESIAN_POINT('',(2.6375,0.825,0.15));+#11462 = VECTOR('',#11463,1.);+#11463 = DIRECTION('',(1.,0.,0.));+#11464 = PCURVE('',#11375,#11465);+#11465 = DEFINITIONAL_REPRESENTATION('',(#11466),#11470);+#11466 = LINE('',#11467,#11468);+#11467 = CARTESIAN_POINT('',(0.,-0.15));+#11468 = VECTOR('',#11469,1.);+#11469 = DIRECTION('',(1.,0.));+#11470 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11471 = PCURVE('',#10956,#11472);+#11472 = DEFINITIONAL_REPRESENTATION('',(#11473),#11477);+#11473 = LINE('',#11474,#11475);+#11474 = CARTESIAN_POINT('',(-6.7942023204E-02,3.317725755E-03));+#11475 = VECTOR('',#11476,1.);+#11476 = DIRECTION('',(0.,1.));+#11477 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11478 = ORIENTED_EDGE('',*,*,#11357,.T.);+#11479 = ORIENTED_EDGE('',*,*,#11480,.F.);+#11480 = EDGE_CURVE('',#11436,#11360,#11481,.T.);+#11481 = SURFACE_CURVE('',#11482,(#11486,#11493),.PCURVE_S1.);+#11482 = LINE('',#11483,#11484);+#11483 = CARTESIAN_POINT('',(2.6375,1.125,0.15));+#11484 = VECTOR('',#11485,1.);+#11485 = DIRECTION('',(1.,0.,0.));+#11486 = PCURVE('',#11375,#11487);+#11487 = DEFINITIONAL_REPRESENTATION('',(#11488),#11492);+#11488 = LINE('',#11489,#11490);+#11489 = CARTESIAN_POINT('',(0.,0.15));+#11490 = VECTOR('',#11491,1.);+#11491 = DIRECTION('',(1.,0.));+#11492 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11493 = PCURVE('',#11012,#11494);+#11494 = DEFINITIONAL_REPRESENTATION('',(#11495),#11499);+#11495 = LINE('',#11496,#11497);+#11496 = CARTESIAN_POINT('',(-6.7942023204E-02,3.317725755E-03));+#11497 = VECTOR('',#11498,1.);+#11498 = DIRECTION('',(0.,1.));+#11499 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11500 = ADVANCED_FACE('',(#11501),#11012,.T.);+#11501 = FACE_BOUND('',#11502,.T.);+#11502 = EDGE_LOOP('',(#11503,#11504,#11525,#11526,#11527,#11528,#11529,+ #11530));+#11503 = ORIENTED_EDGE('',*,*,#10996,.T.);+#11504 = ORIENTED_EDGE('',*,*,#11505,.T.);+#11505 = EDGE_CURVE('',#10969,#11436,#11506,.T.);+#11506 = SURFACE_CURVE('',#11507,(#11511,#11518),.PCURVE_S1.);+#11507 = LINE('',#11508,#11509);+#11508 = CARTESIAN_POINT('',(2.35,1.125,0.595));+#11509 = VECTOR('',#11510,1.);+#11510 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#11511 = PCURVE('',#11012,#11512);+#11512 = DEFINITIONAL_REPRESENTATION('',(#11513),#11517);+#11513 = LINE('',#11514,#11515);+#11514 = CARTESIAN_POINT('',(0.377057976796,-0.284182274245));+#11515 = VECTOR('',#11516,1.);+#11516 = DIRECTION('',(-0.839949759337,0.542664170358));+#11517 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11518 = PCURVE('',#10984,#11519);+#11519 = DEFINITIONAL_REPRESENTATION('',(#11520),#11524);+#11520 = LINE('',#11521,#11522);+#11521 = CARTESIAN_POINT('',(0.,0.15));+#11522 = VECTOR('',#11523,1.);+#11523 = DIRECTION('',(1.,0.));+#11524 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11525 = ORIENTED_EDGE('',*,*,#11480,.T.);+#11526 = ORIENTED_EDGE('',*,*,#11409,.T.);+#11527 = ORIENTED_EDGE('',*,*,#11333,.T.);+#11528 = ORIENTED_EDGE('',*,*,#11257,.T.);+#11529 = ORIENTED_EDGE('',*,*,#11153,.T.);+#11530 = ORIENTED_EDGE('',*,*,#11077,.T.);+#11531 = ADVANCED_FACE('',(#11532),#10984,.T.);+#11532 = FACE_BOUND('',#11533,.T.);+#11533 = EDGE_LOOP('',(#11534,#11535,#11556,#11557));+#11534 = ORIENTED_EDGE('',*,*,#10968,.F.);+#11535 = ORIENTED_EDGE('',*,*,#11536,.T.);+#11536 = EDGE_CURVE('',#10936,#11434,#11537,.T.);+#11537 = SURFACE_CURVE('',#11538,(#11542,#11549),.PCURVE_S1.);+#11538 = LINE('',#11539,#11540);+#11539 = CARTESIAN_POINT('',(2.35,0.825,0.595));+#11540 = VECTOR('',#11541,1.);+#11541 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#11542 = PCURVE('',#10984,#11543);+#11543 = DEFINITIONAL_REPRESENTATION('',(#11544),#11548);+#11544 = LINE('',#11545,#11546);+#11545 = CARTESIAN_POINT('',(0.,-0.15));+#11546 = VECTOR('',#11547,1.);+#11547 = DIRECTION('',(1.,0.));+#11548 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11549 = PCURVE('',#10956,#11550);+#11550 = DEFINITIONAL_REPRESENTATION('',(#11551),#11555);+#11551 = LINE('',#11552,#11553);+#11552 = CARTESIAN_POINT('',(0.377057976796,-0.284182274245));+#11553 = VECTOR('',#11554,1.);+#11554 = DIRECTION('',(-0.839949759337,0.542664170358));+#11555 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11556 = ORIENTED_EDGE('',*,*,#11433,.T.);+#11557 = ORIENTED_EDGE('',*,*,#11505,.F.);+#11558 = ADVANCED_FACE('',(#11559),#10956,.F.);+#11559 = FACE_BOUND('',#11560,.F.);+#11560 = EDGE_LOOP('',(#11561,#11562,#11563,#11564,#11565,#11566,#11567,+ #11568));+#11561 = ORIENTED_EDGE('',*,*,#10933,.T.);+#11562 = ORIENTED_EDGE('',*,*,#11536,.T.);+#11563 = ORIENTED_EDGE('',*,*,#11458,.T.);+#11564 = ORIENTED_EDGE('',*,*,#11387,.T.);+#11565 = ORIENTED_EDGE('',*,*,#11311,.T.);+#11566 = ORIENTED_EDGE('',*,*,#11235,.T.);+#11567 = ORIENTED_EDGE('',*,*,#11129,.T.);+#11568 = ORIENTED_EDGE('',*,*,#11053,.T.);+#11569 = MANIFOLD_SOLID_BREP('',#11570);+#11570 = CLOSED_SHELL('',(#11571,#11691,#11767,#11843,#11919,#11995,+ #12071,#12142,#12173,#12200));+#11571 = ADVANCED_FACE('',(#11572),#11586,.T.);+#11572 = FACE_BOUND('',#11573,.T.);+#11573 = EDGE_LOOP('',(#11574,#11609,#11637,#11665));+#11574 = ORIENTED_EDGE('',*,*,#11575,.T.);+#11575 = EDGE_CURVE('',#11576,#11578,#11580,.T.);+#11576 = VERTEX_POINT('',#11577);+#11577 = CARTESIAN_POINT('',(2.15,1.475,0.595));+#11578 = VERTEX_POINT('',#11579);+#11579 = CARTESIAN_POINT('',(2.35,1.475,0.595));+#11580 = SURFACE_CURVE('',#11581,(#11585,#11597),.PCURVE_S1.);+#11581 = LINE('',#11582,#11583);+#11582 = CARTESIAN_POINT('',(2.15,1.475,0.595));+#11583 = VECTOR('',#11584,1.);+#11584 = DIRECTION('',(1.,0.,0.));+#11585 = PCURVE('',#11586,#11591);+#11586 = PLANE('',#11587);+#11587 = AXIS2_PLACEMENT_3D('',#11588,#11589,#11590);+#11588 = CARTESIAN_POINT('',(2.15,1.625,0.595));+#11589 = DIRECTION('',(0.,0.,1.));+#11590 = DIRECTION('',(1.,0.,0.));+#11591 = DEFINITIONAL_REPRESENTATION('',(#11592),#11596);+#11592 = LINE('',#11593,#11594);+#11593 = CARTESIAN_POINT('',(0.,-0.15));+#11594 = VECTOR('',#11595,1.);+#11595 = DIRECTION('',(1.,0.));+#11596 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11597 = PCURVE('',#11598,#11603);+#11598 = PLANE('',#11599);+#11599 = AXIS2_PLACEMENT_3D('',#11600,#11601,#11602);+#11600 = CARTESIAN_POINT('',(2.634182274245,1.475,0.217942023204));+#11601 = DIRECTION('',(0.,1.,0.));+#11602 = DIRECTION('',(0.,0.,1.));+#11603 = DEFINITIONAL_REPRESENTATION('',(#11604),#11608);+#11604 = LINE('',#11605,#11606);+#11605 = CARTESIAN_POINT('',(0.377057976796,-0.484182274245));+#11606 = VECTOR('',#11607,1.);+#11607 = DIRECTION('',(0.,1.));+#11608 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11609 = ORIENTED_EDGE('',*,*,#11610,.T.);+#11610 = EDGE_CURVE('',#11578,#11611,#11613,.T.);+#11611 = VERTEX_POINT('',#11612);+#11612 = CARTESIAN_POINT('',(2.35,1.775,0.595));+#11613 = SURFACE_CURVE('',#11614,(#11618,#11625),.PCURVE_S1.);+#11614 = LINE('',#11615,#11616);+#11615 = CARTESIAN_POINT('',(2.35,1.475,0.595));+#11616 = VECTOR('',#11617,1.);+#11617 = DIRECTION('',(0.,1.,0.));+#11618 = PCURVE('',#11586,#11619);+#11619 = DEFINITIONAL_REPRESENTATION('',(#11620),#11624);+#11620 = LINE('',#11621,#11622);+#11621 = CARTESIAN_POINT('',(0.2,-0.15));+#11622 = VECTOR('',#11623,1.);+#11623 = DIRECTION('',(0.,1.));+#11624 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11625 = PCURVE('',#11626,#11631);+#11626 = PLANE('',#11627);+#11627 = AXIS2_PLACEMENT_3D('',#11628,#11629,#11630);+#11628 = CARTESIAN_POINT('',(2.35,1.625,0.595));+#11629 = DIRECTION('',(0.839949759337,0.,0.542664170358));+#11630 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#11631 = DEFINITIONAL_REPRESENTATION('',(#11632),#11636);+#11632 = LINE('',#11633,#11634);+#11633 = CARTESIAN_POINT('',(0.,-0.15));+#11634 = VECTOR('',#11635,1.);+#11635 = DIRECTION('',(0.,1.));+#11636 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11637 = ORIENTED_EDGE('',*,*,#11638,.F.);+#11638 = EDGE_CURVE('',#11639,#11611,#11641,.T.);+#11639 = VERTEX_POINT('',#11640);+#11640 = CARTESIAN_POINT('',(2.15,1.775,0.595));+#11641 = SURFACE_CURVE('',#11642,(#11646,#11653),.PCURVE_S1.);+#11642 = LINE('',#11643,#11644);+#11643 = CARTESIAN_POINT('',(2.15,1.775,0.595));+#11644 = VECTOR('',#11645,1.);+#11645 = DIRECTION('',(1.,0.,0.));+#11646 = PCURVE('',#11586,#11647);+#11647 = DEFINITIONAL_REPRESENTATION('',(#11648),#11652);+#11648 = LINE('',#11649,#11650);+#11649 = CARTESIAN_POINT('',(0.,0.15));+#11650 = VECTOR('',#11651,1.);+#11651 = DIRECTION('',(1.,0.));+#11652 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11653 = PCURVE('',#11654,#11659);+#11654 = PLANE('',#11655);+#11655 = AXIS2_PLACEMENT_3D('',#11656,#11657,#11658);+#11656 = CARTESIAN_POINT('',(2.634182274245,1.775,0.217942023204));+#11657 = DIRECTION('',(0.,1.,0.));+#11658 = DIRECTION('',(0.,0.,1.));+#11659 = DEFINITIONAL_REPRESENTATION('',(#11660),#11664);+#11660 = LINE('',#11661,#11662);+#11661 = CARTESIAN_POINT('',(0.377057976796,-0.484182274245));+#11662 = VECTOR('',#11663,1.);+#11663 = DIRECTION('',(0.,1.));+#11664 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11665 = ORIENTED_EDGE('',*,*,#11666,.T.);+#11666 = EDGE_CURVE('',#11639,#11576,#11667,.T.);+#11667 = SURFACE_CURVE('',#11668,(#11672,#11679),.PCURVE_S1.);+#11668 = LINE('',#11669,#11670);+#11669 = CARTESIAN_POINT('',(2.15,1.775,0.595));+#11670 = VECTOR('',#11671,1.);+#11671 = DIRECTION('',(0.,-1.,0.));+#11672 = PCURVE('',#11586,#11673);+#11673 = DEFINITIONAL_REPRESENTATION('',(#11674),#11678);+#11674 = LINE('',#11675,#11676);+#11675 = CARTESIAN_POINT('',(0.,0.15));+#11676 = VECTOR('',#11677,1.);+#11677 = DIRECTION('',(0.,-1.));+#11678 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11679 = PCURVE('',#11680,#11685);+#11680 = PLANE('',#11681);+#11681 = AXIS2_PLACEMENT_3D('',#11682,#11683,#11684);+#11682 = CARTESIAN_POINT('',(2.15,1.625,0.445));+#11683 = DIRECTION('',(-1.,0.,0.));+#11684 = DIRECTION('',(0.,0.,1.));+#11685 = DEFINITIONAL_REPRESENTATION('',(#11686),#11690);+#11686 = LINE('',#11687,#11688);+#11687 = CARTESIAN_POINT('',(0.15,0.15));+#11688 = VECTOR('',#11689,1.);+#11689 = DIRECTION('',(0.,-1.));+#11690 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11691 = ADVANCED_FACE('',(#11692),#11680,.T.);+#11692 = FACE_BOUND('',#11693,.T.);+#11693 = EDGE_LOOP('',(#11694,#11717,#11718,#11741));+#11694 = ORIENTED_EDGE('',*,*,#11695,.T.);+#11695 = EDGE_CURVE('',#11696,#11576,#11698,.T.);+#11696 = VERTEX_POINT('',#11697);+#11697 = CARTESIAN_POINT('',(2.15,1.475,0.445));+#11698 = SURFACE_CURVE('',#11699,(#11703,#11710),.PCURVE_S1.);+#11699 = LINE('',#11700,#11701);+#11700 = CARTESIAN_POINT('',(2.15,1.475,0.445));+#11701 = VECTOR('',#11702,1.);+#11702 = DIRECTION('',(0.,0.,1.));+#11703 = PCURVE('',#11680,#11704);+#11704 = DEFINITIONAL_REPRESENTATION('',(#11705),#11709);+#11705 = LINE('',#11706,#11707);+#11706 = CARTESIAN_POINT('',(0.,-0.15));+#11707 = VECTOR('',#11708,1.);+#11708 = DIRECTION('',(1.,0.));+#11709 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11710 = PCURVE('',#11598,#11711);+#11711 = DEFINITIONAL_REPRESENTATION('',(#11712),#11716);+#11712 = LINE('',#11713,#11714);+#11713 = CARTESIAN_POINT('',(0.227057976796,-0.484182274245));+#11714 = VECTOR('',#11715,1.);+#11715 = DIRECTION('',(1.,0.));+#11716 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11717 = ORIENTED_EDGE('',*,*,#11666,.F.);+#11718 = ORIENTED_EDGE('',*,*,#11719,.F.);+#11719 = EDGE_CURVE('',#11720,#11639,#11722,.T.);+#11720 = VERTEX_POINT('',#11721);+#11721 = CARTESIAN_POINT('',(2.15,1.775,0.445));+#11722 = SURFACE_CURVE('',#11723,(#11727,#11734),.PCURVE_S1.);+#11723 = LINE('',#11724,#11725);+#11724 = CARTESIAN_POINT('',(2.15,1.775,0.445));+#11725 = VECTOR('',#11726,1.);+#11726 = DIRECTION('',(0.,0.,1.));+#11727 = PCURVE('',#11680,#11728);+#11728 = DEFINITIONAL_REPRESENTATION('',(#11729),#11733);+#11729 = LINE('',#11730,#11731);+#11730 = CARTESIAN_POINT('',(0.,0.15));+#11731 = VECTOR('',#11732,1.);+#11732 = DIRECTION('',(1.,0.));+#11733 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11734 = PCURVE('',#11654,#11735);+#11735 = DEFINITIONAL_REPRESENTATION('',(#11736),#11740);+#11736 = LINE('',#11737,#11738);+#11737 = CARTESIAN_POINT('',(0.227057976796,-0.484182274245));+#11738 = VECTOR('',#11739,1.);+#11739 = DIRECTION('',(1.,0.));+#11740 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11741 = ORIENTED_EDGE('',*,*,#11742,.T.);+#11742 = EDGE_CURVE('',#11720,#11696,#11743,.T.);+#11743 = SURFACE_CURVE('',#11744,(#11748,#11755),.PCURVE_S1.);+#11744 = LINE('',#11745,#11746);+#11745 = CARTESIAN_POINT('',(2.15,1.775,0.445));+#11746 = VECTOR('',#11747,1.);+#11747 = DIRECTION('',(0.,-1.,0.));+#11748 = PCURVE('',#11680,#11749);+#11749 = DEFINITIONAL_REPRESENTATION('',(#11750),#11754);+#11750 = LINE('',#11751,#11752);+#11751 = CARTESIAN_POINT('',(0.,0.15));+#11752 = VECTOR('',#11753,1.);+#11753 = DIRECTION('',(0.,-1.));+#11754 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11755 = PCURVE('',#11756,#11761);+#11756 = PLANE('',#11757);+#11757 = AXIS2_PLACEMENT_3D('',#11758,#11759,#11760);+#11758 = CARTESIAN_POINT('',(2.2,1.625,0.445));+#11759 = DIRECTION('',(-0.,-0.,-1.));+#11760 = DIRECTION('',(-1.,0.,0.));+#11761 = DEFINITIONAL_REPRESENTATION('',(#11762),#11766);+#11762 = LINE('',#11763,#11764);+#11763 = CARTESIAN_POINT('',(5.E-02,0.15));+#11764 = VECTOR('',#11765,1.);+#11765 = DIRECTION('',(0.,-1.));+#11766 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11767 = ADVANCED_FACE('',(#11768),#11756,.T.);+#11768 = FACE_BOUND('',#11769,.T.);+#11769 = EDGE_LOOP('',(#11770,#11793,#11794,#11817));+#11770 = ORIENTED_EDGE('',*,*,#11771,.T.);+#11771 = EDGE_CURVE('',#11772,#11696,#11774,.T.);+#11772 = VERTEX_POINT('',#11773);+#11773 = CARTESIAN_POINT('',(2.2,1.475,0.445));+#11774 = SURFACE_CURVE('',#11775,(#11779,#11786),.PCURVE_S1.);+#11775 = LINE('',#11776,#11777);+#11776 = CARTESIAN_POINT('',(2.2,1.475,0.445));+#11777 = VECTOR('',#11778,1.);+#11778 = DIRECTION('',(-1.,0.,0.));+#11779 = PCURVE('',#11756,#11780);+#11780 = DEFINITIONAL_REPRESENTATION('',(#11781),#11785);+#11781 = LINE('',#11782,#11783);+#11782 = CARTESIAN_POINT('',(0.,-0.15));+#11783 = VECTOR('',#11784,1.);+#11784 = DIRECTION('',(1.,0.));+#11785 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11786 = PCURVE('',#11598,#11787);+#11787 = DEFINITIONAL_REPRESENTATION('',(#11788),#11792);+#11788 = LINE('',#11789,#11790);+#11789 = CARTESIAN_POINT('',(0.227057976796,-0.434182274245));+#11790 = VECTOR('',#11791,1.);+#11791 = DIRECTION('',(0.,-1.));+#11792 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11793 = ORIENTED_EDGE('',*,*,#11742,.F.);+#11794 = ORIENTED_EDGE('',*,*,#11795,.F.);+#11795 = EDGE_CURVE('',#11796,#11720,#11798,.T.);+#11796 = VERTEX_POINT('',#11797);+#11797 = CARTESIAN_POINT('',(2.2,1.775,0.445));+#11798 = SURFACE_CURVE('',#11799,(#11803,#11810),.PCURVE_S1.);+#11799 = LINE('',#11800,#11801);+#11800 = CARTESIAN_POINT('',(2.2,1.775,0.445));+#11801 = VECTOR('',#11802,1.);+#11802 = DIRECTION('',(-1.,0.,0.));+#11803 = PCURVE('',#11756,#11804);+#11804 = DEFINITIONAL_REPRESENTATION('',(#11805),#11809);+#11805 = LINE('',#11806,#11807);+#11806 = CARTESIAN_POINT('',(0.,0.15));+#11807 = VECTOR('',#11808,1.);+#11808 = DIRECTION('',(1.,0.));+#11809 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11810 = PCURVE('',#11654,#11811);+#11811 = DEFINITIONAL_REPRESENTATION('',(#11812),#11816);+#11812 = LINE('',#11813,#11814);+#11813 = CARTESIAN_POINT('',(0.227057976796,-0.434182274245));+#11814 = VECTOR('',#11815,1.);+#11815 = DIRECTION('',(0.,-1.));+#11816 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11817 = ORIENTED_EDGE('',*,*,#11818,.T.);+#11818 = EDGE_CURVE('',#11796,#11772,#11819,.T.);+#11819 = SURFACE_CURVE('',#11820,(#11824,#11831),.PCURVE_S1.);+#11820 = LINE('',#11821,#11822);+#11821 = CARTESIAN_POINT('',(2.2,1.775,0.445));+#11822 = VECTOR('',#11823,1.);+#11823 = DIRECTION('',(0.,-1.,0.));+#11824 = PCURVE('',#11756,#11825);+#11825 = DEFINITIONAL_REPRESENTATION('',(#11826),#11830);+#11826 = LINE('',#11827,#11828);+#11827 = CARTESIAN_POINT('',(0.,0.15));+#11828 = VECTOR('',#11829,1.);+#11829 = DIRECTION('',(0.,-1.));+#11830 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11831 = PCURVE('',#11832,#11837);+#11832 = PLANE('',#11833);+#11833 = AXIS2_PLACEMENT_3D('',#11834,#11835,#11836);+#11834 = CARTESIAN_POINT('',(2.4875,1.625,0.));+#11835 = DIRECTION('',(-0.839949759337,-0.,-0.542664170358));+#11836 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#11837 = DEFINITIONAL_REPRESENTATION('',(#11838),#11842);+#11838 = LINE('',#11839,#11840);+#11839 = CARTESIAN_POINT('',(0.529793591883,0.15));+#11840 = VECTOR('',#11841,1.);+#11841 = DIRECTION('',(0.,-1.));+#11842 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11843 = ADVANCED_FACE('',(#11844),#11832,.T.);+#11844 = FACE_BOUND('',#11845,.T.);+#11845 = EDGE_LOOP('',(#11846,#11876,#11897,#11898));+#11846 = ORIENTED_EDGE('',*,*,#11847,.F.);+#11847 = EDGE_CURVE('',#11848,#11850,#11852,.T.);+#11848 = VERTEX_POINT('',#11849);+#11849 = CARTESIAN_POINT('',(2.4875,1.475,0.));+#11850 = VERTEX_POINT('',#11851);+#11851 = CARTESIAN_POINT('',(2.4875,1.775,0.));+#11852 = SURFACE_CURVE('',#11853,(#11857,#11864),.PCURVE_S1.);+#11853 = LINE('',#11854,#11855);+#11854 = CARTESIAN_POINT('',(2.4875,1.475,0.));+#11855 = VECTOR('',#11856,1.);+#11856 = DIRECTION('',(0.,1.,0.));+#11857 = PCURVE('',#11832,#11858);+#11858 = DEFINITIONAL_REPRESENTATION('',(#11859),#11863);+#11859 = LINE('',#11860,#11861);+#11860 = CARTESIAN_POINT('',(0.,-0.15));+#11861 = VECTOR('',#11862,1.);+#11862 = DIRECTION('',(0.,1.));+#11863 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11864 = PCURVE('',#11865,#11870);+#11865 = PLANE('',#11866);+#11866 = AXIS2_PLACEMENT_3D('',#11867,#11868,#11869);+#11867 = CARTESIAN_POINT('',(3.205,1.625,0.));+#11868 = DIRECTION('',(-0.,-0.,-1.));+#11869 = DIRECTION('',(-1.,0.,0.));+#11870 = DEFINITIONAL_REPRESENTATION('',(#11871),#11875);+#11871 = LINE('',#11872,#11873);+#11872 = CARTESIAN_POINT('',(0.7175,-0.15));+#11873 = VECTOR('',#11874,1.);+#11874 = DIRECTION('',(0.,1.));+#11875 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11876 = ORIENTED_EDGE('',*,*,#11877,.T.);+#11877 = EDGE_CURVE('',#11848,#11772,#11878,.T.);+#11878 = SURFACE_CURVE('',#11879,(#11883,#11890),.PCURVE_S1.);+#11879 = LINE('',#11880,#11881);+#11880 = CARTESIAN_POINT('',(2.4875,1.475,0.));+#11881 = VECTOR('',#11882,1.);+#11882 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#11883 = PCURVE('',#11832,#11884);+#11884 = DEFINITIONAL_REPRESENTATION('',(#11885),#11889);+#11885 = LINE('',#11886,#11887);+#11886 = CARTESIAN_POINT('',(0.,-0.15));+#11887 = VECTOR('',#11888,1.);+#11888 = DIRECTION('',(1.,0.));+#11889 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11890 = PCURVE('',#11598,#11891);+#11891 = DEFINITIONAL_REPRESENTATION('',(#11892),#11896);+#11892 = LINE('',#11893,#11894);+#11893 = CARTESIAN_POINT('',(-0.217942023204,-0.146682274245));+#11894 = VECTOR('',#11895,1.);+#11895 = DIRECTION('',(0.839949759337,-0.542664170358));+#11896 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11897 = ORIENTED_EDGE('',*,*,#11818,.F.);+#11898 = ORIENTED_EDGE('',*,*,#11899,.F.);+#11899 = EDGE_CURVE('',#11850,#11796,#11900,.T.);+#11900 = SURFACE_CURVE('',#11901,(#11905,#11912),.PCURVE_S1.);+#11901 = LINE('',#11902,#11903);+#11902 = CARTESIAN_POINT('',(2.4875,1.775,0.));+#11903 = VECTOR('',#11904,1.);+#11904 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#11905 = PCURVE('',#11832,#11906);+#11906 = DEFINITIONAL_REPRESENTATION('',(#11907),#11911);+#11907 = LINE('',#11908,#11909);+#11908 = CARTESIAN_POINT('',(0.,0.15));+#11909 = VECTOR('',#11910,1.);+#11910 = DIRECTION('',(1.,0.));+#11911 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11912 = PCURVE('',#11654,#11913);+#11913 = DEFINITIONAL_REPRESENTATION('',(#11914),#11918);+#11914 = LINE('',#11915,#11916);+#11915 = CARTESIAN_POINT('',(-0.217942023204,-0.146682274245));+#11916 = VECTOR('',#11917,1.);+#11917 = DIRECTION('',(0.839949759337,-0.542664170358));+#11918 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11919 = ADVANCED_FACE('',(#11920),#11865,.T.);+#11920 = FACE_BOUND('',#11921,.T.);+#11921 = EDGE_LOOP('',(#11922,#11952,#11973,#11974));+#11922 = ORIENTED_EDGE('',*,*,#11923,.F.);+#11923 = EDGE_CURVE('',#11924,#11926,#11928,.T.);+#11924 = VERTEX_POINT('',#11925);+#11925 = CARTESIAN_POINT('',(3.205,1.475,0.));+#11926 = VERTEX_POINT('',#11927);+#11927 = CARTESIAN_POINT('',(3.205,1.775,0.));+#11928 = SURFACE_CURVE('',#11929,(#11933,#11940),.PCURVE_S1.);+#11929 = LINE('',#11930,#11931);+#11930 = CARTESIAN_POINT('',(3.205,1.475,0.));+#11931 = VECTOR('',#11932,1.);+#11932 = DIRECTION('',(0.,1.,0.));+#11933 = PCURVE('',#11865,#11934);+#11934 = DEFINITIONAL_REPRESENTATION('',(#11935),#11939);+#11935 = LINE('',#11936,#11937);+#11936 = CARTESIAN_POINT('',(0.,-0.15));+#11937 = VECTOR('',#11938,1.);+#11938 = DIRECTION('',(0.,1.));+#11939 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11940 = PCURVE('',#11941,#11946);+#11941 = PLANE('',#11942);+#11942 = AXIS2_PLACEMENT_3D('',#11943,#11944,#11945);+#11943 = CARTESIAN_POINT('',(3.205,1.625,0.15));+#11944 = DIRECTION('',(1.,0.,0.));+#11945 = DIRECTION('',(0.,0.,-1.));+#11946 = DEFINITIONAL_REPRESENTATION('',(#11947),#11951);+#11947 = LINE('',#11948,#11949);+#11948 = CARTESIAN_POINT('',(0.15,-0.15));+#11949 = VECTOR('',#11950,1.);+#11950 = DIRECTION('',(0.,1.));+#11951 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11952 = ORIENTED_EDGE('',*,*,#11953,.T.);+#11953 = EDGE_CURVE('',#11924,#11848,#11954,.T.);+#11954 = SURFACE_CURVE('',#11955,(#11959,#11966),.PCURVE_S1.);+#11955 = LINE('',#11956,#11957);+#11956 = CARTESIAN_POINT('',(3.205,1.475,0.));+#11957 = VECTOR('',#11958,1.);+#11958 = DIRECTION('',(-1.,0.,0.));+#11959 = PCURVE('',#11865,#11960);+#11960 = DEFINITIONAL_REPRESENTATION('',(#11961),#11965);+#11961 = LINE('',#11962,#11963);+#11962 = CARTESIAN_POINT('',(0.,-0.15));+#11963 = VECTOR('',#11964,1.);+#11964 = DIRECTION('',(1.,0.));+#11965 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11966 = PCURVE('',#11598,#11967);+#11967 = DEFINITIONAL_REPRESENTATION('',(#11968),#11972);+#11968 = LINE('',#11969,#11970);+#11969 = CARTESIAN_POINT('',(-0.217942023204,0.570817725755));+#11970 = VECTOR('',#11971,1.);+#11971 = DIRECTION('',(0.,-1.));+#11972 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11973 = ORIENTED_EDGE('',*,*,#11847,.T.);+#11974 = ORIENTED_EDGE('',*,*,#11975,.F.);+#11975 = EDGE_CURVE('',#11926,#11850,#11976,.T.);+#11976 = SURFACE_CURVE('',#11977,(#11981,#11988),.PCURVE_S1.);+#11977 = LINE('',#11978,#11979);+#11978 = CARTESIAN_POINT('',(3.205,1.775,0.));+#11979 = VECTOR('',#11980,1.);+#11980 = DIRECTION('',(-1.,0.,0.));+#11981 = PCURVE('',#11865,#11982);+#11982 = DEFINITIONAL_REPRESENTATION('',(#11983),#11987);+#11983 = LINE('',#11984,#11985);+#11984 = CARTESIAN_POINT('',(0.,0.15));+#11985 = VECTOR('',#11986,1.);+#11986 = DIRECTION('',(1.,0.));+#11987 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11988 = PCURVE('',#11654,#11989);+#11989 = DEFINITIONAL_REPRESENTATION('',(#11990),#11994);+#11990 = LINE('',#11991,#11992);+#11991 = CARTESIAN_POINT('',(-0.217942023204,0.570817725755));+#11992 = VECTOR('',#11993,1.);+#11993 = DIRECTION('',(0.,-1.));+#11994 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11995 = ADVANCED_FACE('',(#11996),#11941,.T.);+#11996 = FACE_BOUND('',#11997,.T.);+#11997 = EDGE_LOOP('',(#11998,#12028,#12049,#12050));+#11998 = ORIENTED_EDGE('',*,*,#11999,.F.);+#11999 = EDGE_CURVE('',#12000,#12002,#12004,.T.);+#12000 = VERTEX_POINT('',#12001);+#12001 = CARTESIAN_POINT('',(3.205,1.475,0.15));+#12002 = VERTEX_POINT('',#12003);+#12003 = CARTESIAN_POINT('',(3.205,1.775,0.15));+#12004 = SURFACE_CURVE('',#12005,(#12009,#12016),.PCURVE_S1.);+#12005 = LINE('',#12006,#12007);+#12006 = CARTESIAN_POINT('',(3.205,1.475,0.15));+#12007 = VECTOR('',#12008,1.);+#12008 = DIRECTION('',(0.,1.,0.));+#12009 = PCURVE('',#11941,#12010);+#12010 = DEFINITIONAL_REPRESENTATION('',(#12011),#12015);+#12011 = LINE('',#12012,#12013);+#12012 = CARTESIAN_POINT('',(0.,-0.15));+#12013 = VECTOR('',#12014,1.);+#12014 = DIRECTION('',(0.,1.));+#12015 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12016 = PCURVE('',#12017,#12022);+#12017 = PLANE('',#12018);+#12018 = AXIS2_PLACEMENT_3D('',#12019,#12020,#12021);+#12019 = CARTESIAN_POINT('',(2.6375,1.625,0.15));+#12020 = DIRECTION('',(0.,0.,1.));+#12021 = DIRECTION('',(1.,0.,0.));+#12022 = DEFINITIONAL_REPRESENTATION('',(#12023),#12027);+#12023 = LINE('',#12024,#12025);+#12024 = CARTESIAN_POINT('',(0.5675,-0.15));+#12025 = VECTOR('',#12026,1.);+#12026 = DIRECTION('',(0.,1.));+#12027 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12028 = ORIENTED_EDGE('',*,*,#12029,.T.);+#12029 = EDGE_CURVE('',#12000,#11924,#12030,.T.);+#12030 = SURFACE_CURVE('',#12031,(#12035,#12042),.PCURVE_S1.);+#12031 = LINE('',#12032,#12033);+#12032 = CARTESIAN_POINT('',(3.205,1.475,0.15));+#12033 = VECTOR('',#12034,1.);+#12034 = DIRECTION('',(0.,0.,-1.));+#12035 = PCURVE('',#11941,#12036);+#12036 = DEFINITIONAL_REPRESENTATION('',(#12037),#12041);+#12037 = LINE('',#12038,#12039);+#12038 = CARTESIAN_POINT('',(0.,-0.15));+#12039 = VECTOR('',#12040,1.);+#12040 = DIRECTION('',(1.,0.));+#12041 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12042 = PCURVE('',#11598,#12043);+#12043 = DEFINITIONAL_REPRESENTATION('',(#12044),#12048);+#12044 = LINE('',#12045,#12046);+#12045 = CARTESIAN_POINT('',(-6.7942023204E-02,0.570817725755));+#12046 = VECTOR('',#12047,1.);+#12047 = DIRECTION('',(-1.,0.));+#12048 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12049 = ORIENTED_EDGE('',*,*,#11923,.T.);+#12050 = ORIENTED_EDGE('',*,*,#12051,.F.);+#12051 = EDGE_CURVE('',#12002,#11926,#12052,.T.);+#12052 = SURFACE_CURVE('',#12053,(#12057,#12064),.PCURVE_S1.);+#12053 = LINE('',#12054,#12055);+#12054 = CARTESIAN_POINT('',(3.205,1.775,0.15));+#12055 = VECTOR('',#12056,1.);+#12056 = DIRECTION('',(0.,0.,-1.));+#12057 = PCURVE('',#11941,#12058);+#12058 = DEFINITIONAL_REPRESENTATION('',(#12059),#12063);+#12059 = LINE('',#12060,#12061);+#12060 = CARTESIAN_POINT('',(0.,0.15));+#12061 = VECTOR('',#12062,1.);+#12062 = DIRECTION('',(1.,0.));+#12063 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12064 = PCURVE('',#11654,#12065);+#12065 = DEFINITIONAL_REPRESENTATION('',(#12066),#12070);+#12066 = LINE('',#12067,#12068);+#12067 = CARTESIAN_POINT('',(-6.7942023204E-02,0.570817725755));+#12068 = VECTOR('',#12069,1.);+#12069 = DIRECTION('',(-1.,0.));+#12070 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12071 = ADVANCED_FACE('',(#12072),#12017,.T.);+#12072 = FACE_BOUND('',#12073,.T.);+#12073 = EDGE_LOOP('',(#12074,#12099,#12120,#12121));+#12074 = ORIENTED_EDGE('',*,*,#12075,.F.);+#12075 = EDGE_CURVE('',#12076,#12078,#12080,.T.);+#12076 = VERTEX_POINT('',#12077);+#12077 = CARTESIAN_POINT('',(2.6375,1.475,0.15));+#12078 = VERTEX_POINT('',#12079);+#12079 = CARTESIAN_POINT('',(2.6375,1.775,0.15));+#12080 = SURFACE_CURVE('',#12081,(#12085,#12092),.PCURVE_S1.);+#12081 = LINE('',#12082,#12083);+#12082 = CARTESIAN_POINT('',(2.6375,1.475,0.15));+#12083 = VECTOR('',#12084,1.);+#12084 = DIRECTION('',(0.,1.,0.));+#12085 = PCURVE('',#12017,#12086);+#12086 = DEFINITIONAL_REPRESENTATION('',(#12087),#12091);+#12087 = LINE('',#12088,#12089);+#12088 = CARTESIAN_POINT('',(0.,-0.15));+#12089 = VECTOR('',#12090,1.);+#12090 = DIRECTION('',(0.,1.));+#12091 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12092 = PCURVE('',#11626,#12093);+#12093 = DEFINITIONAL_REPRESENTATION('',(#12094),#12098);+#12094 = LINE('',#12095,#12096);+#12095 = CARTESIAN_POINT('',(0.529793591883,-0.15));+#12096 = VECTOR('',#12097,1.);+#12097 = DIRECTION('',(0.,1.));+#12098 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12099 = ORIENTED_EDGE('',*,*,#12100,.T.);+#12100 = EDGE_CURVE('',#12076,#12000,#12101,.T.);+#12101 = SURFACE_CURVE('',#12102,(#12106,#12113),.PCURVE_S1.);+#12102 = LINE('',#12103,#12104);+#12103 = CARTESIAN_POINT('',(2.6375,1.475,0.15));+#12104 = VECTOR('',#12105,1.);+#12105 = DIRECTION('',(1.,0.,0.));+#12106 = PCURVE('',#12017,#12107);+#12107 = DEFINITIONAL_REPRESENTATION('',(#12108),#12112);+#12108 = LINE('',#12109,#12110);+#12109 = CARTESIAN_POINT('',(0.,-0.15));+#12110 = VECTOR('',#12111,1.);+#12111 = DIRECTION('',(1.,0.));+#12112 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12113 = PCURVE('',#11598,#12114);+#12114 = DEFINITIONAL_REPRESENTATION('',(#12115),#12119);+#12115 = LINE('',#12116,#12117);+#12116 = CARTESIAN_POINT('',(-6.7942023204E-02,3.317725755E-03));+#12117 = VECTOR('',#12118,1.);+#12118 = DIRECTION('',(0.,1.));+#12119 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12120 = ORIENTED_EDGE('',*,*,#11999,.T.);+#12121 = ORIENTED_EDGE('',*,*,#12122,.F.);+#12122 = EDGE_CURVE('',#12078,#12002,#12123,.T.);+#12123 = SURFACE_CURVE('',#12124,(#12128,#12135),.PCURVE_S1.);+#12124 = LINE('',#12125,#12126);+#12125 = CARTESIAN_POINT('',(2.6375,1.775,0.15));+#12126 = VECTOR('',#12127,1.);+#12127 = DIRECTION('',(1.,0.,0.));+#12128 = PCURVE('',#12017,#12129);+#12129 = DEFINITIONAL_REPRESENTATION('',(#12130),#12134);+#12130 = LINE('',#12131,#12132);+#12131 = CARTESIAN_POINT('',(0.,0.15));+#12132 = VECTOR('',#12133,1.);+#12133 = DIRECTION('',(1.,0.));+#12134 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12135 = PCURVE('',#11654,#12136);+#12136 = DEFINITIONAL_REPRESENTATION('',(#12137),#12141);+#12137 = LINE('',#12138,#12139);+#12138 = CARTESIAN_POINT('',(-6.7942023204E-02,3.317725755E-03));+#12139 = VECTOR('',#12140,1.);+#12140 = DIRECTION('',(0.,1.));+#12141 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12142 = ADVANCED_FACE('',(#12143),#11654,.T.);+#12143 = FACE_BOUND('',#12144,.T.);+#12144 = EDGE_LOOP('',(#12145,#12146,#12167,#12168,#12169,#12170,#12171,+ #12172));+#12145 = ORIENTED_EDGE('',*,*,#11638,.T.);+#12146 = ORIENTED_EDGE('',*,*,#12147,.T.);+#12147 = EDGE_CURVE('',#11611,#12078,#12148,.T.);+#12148 = SURFACE_CURVE('',#12149,(#12153,#12160),.PCURVE_S1.);+#12149 = LINE('',#12150,#12151);+#12150 = CARTESIAN_POINT('',(2.35,1.775,0.595));+#12151 = VECTOR('',#12152,1.);+#12152 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#12153 = PCURVE('',#11654,#12154);+#12154 = DEFINITIONAL_REPRESENTATION('',(#12155),#12159);+#12155 = LINE('',#12156,#12157);+#12156 = CARTESIAN_POINT('',(0.377057976796,-0.284182274245));+#12157 = VECTOR('',#12158,1.);+#12158 = DIRECTION('',(-0.839949759337,0.542664170358));+#12159 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12160 = PCURVE('',#11626,#12161);+#12161 = DEFINITIONAL_REPRESENTATION('',(#12162),#12166);+#12162 = LINE('',#12163,#12164);+#12163 = CARTESIAN_POINT('',(0.,0.15));+#12164 = VECTOR('',#12165,1.);+#12165 = DIRECTION('',(1.,0.));+#12166 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12167 = ORIENTED_EDGE('',*,*,#12122,.T.);+#12168 = ORIENTED_EDGE('',*,*,#12051,.T.);+#12169 = ORIENTED_EDGE('',*,*,#11975,.T.);+#12170 = ORIENTED_EDGE('',*,*,#11899,.T.);+#12171 = ORIENTED_EDGE('',*,*,#11795,.T.);+#12172 = ORIENTED_EDGE('',*,*,#11719,.T.);+#12173 = ADVANCED_FACE('',(#12174),#11626,.T.);+#12174 = FACE_BOUND('',#12175,.T.);+#12175 = EDGE_LOOP('',(#12176,#12177,#12198,#12199));+#12176 = ORIENTED_EDGE('',*,*,#11610,.F.);+#12177 = ORIENTED_EDGE('',*,*,#12178,.T.);+#12178 = EDGE_CURVE('',#11578,#12076,#12179,.T.);+#12179 = SURFACE_CURVE('',#12180,(#12184,#12191),.PCURVE_S1.);+#12180 = LINE('',#12181,#12182);+#12181 = CARTESIAN_POINT('',(2.35,1.475,0.595));+#12182 = VECTOR('',#12183,1.);+#12183 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#12184 = PCURVE('',#11626,#12185);+#12185 = DEFINITIONAL_REPRESENTATION('',(#12186),#12190);+#12186 = LINE('',#12187,#12188);+#12187 = CARTESIAN_POINT('',(0.,-0.15));+#12188 = VECTOR('',#12189,1.);+#12189 = DIRECTION('',(1.,0.));+#12190 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12191 = PCURVE('',#11598,#12192);+#12192 = DEFINITIONAL_REPRESENTATION('',(#12193),#12197);+#12193 = LINE('',#12194,#12195);+#12194 = CARTESIAN_POINT('',(0.377057976796,-0.284182274245));+#12195 = VECTOR('',#12196,1.);+#12196 = DIRECTION('',(-0.839949759337,0.542664170358));+#12197 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12198 = ORIENTED_EDGE('',*,*,#12075,.T.);+#12199 = ORIENTED_EDGE('',*,*,#12147,.F.);+#12200 = ADVANCED_FACE('',(#12201),#11598,.F.);+#12201 = FACE_BOUND('',#12202,.F.);+#12202 = EDGE_LOOP('',(#12203,#12204,#12205,#12206,#12207,#12208,#12209,+ #12210));+#12203 = ORIENTED_EDGE('',*,*,#11575,.T.);+#12204 = ORIENTED_EDGE('',*,*,#12178,.T.);+#12205 = ORIENTED_EDGE('',*,*,#12100,.T.);+#12206 = ORIENTED_EDGE('',*,*,#12029,.T.);+#12207 = ORIENTED_EDGE('',*,*,#11953,.T.);+#12208 = ORIENTED_EDGE('',*,*,#11877,.T.);+#12209 = ORIENTED_EDGE('',*,*,#11771,.T.);+#12210 = ORIENTED_EDGE('',*,*,#11695,.T.);+#12211 = MANIFOLD_SOLID_BREP('',#12212);+#12212 = CLOSED_SHELL('',(#12213,#12333,#12409,#12485,#12561,#12637,+ #12713,#12784,#12815,#12842));+#12213 = ADVANCED_FACE('',(#12214),#12228,.T.);+#12214 = FACE_BOUND('',#12215,.T.);+#12215 = EDGE_LOOP('',(#12216,#12251,#12279,#12307));+#12216 = ORIENTED_EDGE('',*,*,#12217,.T.);+#12217 = EDGE_CURVE('',#12218,#12220,#12222,.T.);+#12218 = VERTEX_POINT('',#12219);+#12219 = CARTESIAN_POINT('',(2.15,2.125,0.595));+#12220 = VERTEX_POINT('',#12221);+#12221 = CARTESIAN_POINT('',(2.35,2.125,0.595));+#12222 = SURFACE_CURVE('',#12223,(#12227,#12239),.PCURVE_S1.);+#12223 = LINE('',#12224,#12225);+#12224 = CARTESIAN_POINT('',(2.15,2.125,0.595));+#12225 = VECTOR('',#12226,1.);+#12226 = DIRECTION('',(1.,0.,0.));+#12227 = PCURVE('',#12228,#12233);+#12228 = PLANE('',#12229);+#12229 = AXIS2_PLACEMENT_3D('',#12230,#12231,#12232);+#12230 = CARTESIAN_POINT('',(2.15,2.275,0.595));+#12231 = DIRECTION('',(0.,0.,1.));+#12232 = DIRECTION('',(1.,0.,0.));+#12233 = DEFINITIONAL_REPRESENTATION('',(#12234),#12238);+#12234 = LINE('',#12235,#12236);+#12235 = CARTESIAN_POINT('',(0.,-0.15));+#12236 = VECTOR('',#12237,1.);+#12237 = DIRECTION('',(1.,0.));+#12238 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12239 = PCURVE('',#12240,#12245);+#12240 = PLANE('',#12241);+#12241 = AXIS2_PLACEMENT_3D('',#12242,#12243,#12244);+#12242 = CARTESIAN_POINT('',(2.634182274245,2.125,0.217942023204));+#12243 = DIRECTION('',(0.,1.,0.));+#12244 = DIRECTION('',(0.,0.,1.));+#12245 = DEFINITIONAL_REPRESENTATION('',(#12246),#12250);+#12246 = LINE('',#12247,#12248);+#12247 = CARTESIAN_POINT('',(0.377057976796,-0.484182274245));+#12248 = VECTOR('',#12249,1.);+#12249 = DIRECTION('',(0.,1.));+#12250 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12251 = ORIENTED_EDGE('',*,*,#12252,.T.);+#12252 = EDGE_CURVE('',#12220,#12253,#12255,.T.);+#12253 = VERTEX_POINT('',#12254);+#12254 = CARTESIAN_POINT('',(2.35,2.425,0.595));+#12255 = SURFACE_CURVE('',#12256,(#12260,#12267),.PCURVE_S1.);+#12256 = LINE('',#12257,#12258);+#12257 = CARTESIAN_POINT('',(2.35,2.125,0.595));+#12258 = VECTOR('',#12259,1.);+#12259 = DIRECTION('',(0.,1.,0.));+#12260 = PCURVE('',#12228,#12261);+#12261 = DEFINITIONAL_REPRESENTATION('',(#12262),#12266);+#12262 = LINE('',#12263,#12264);+#12263 = CARTESIAN_POINT('',(0.2,-0.15));+#12264 = VECTOR('',#12265,1.);+#12265 = DIRECTION('',(0.,1.));+#12266 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12267 = PCURVE('',#12268,#12273);+#12268 = PLANE('',#12269);+#12269 = AXIS2_PLACEMENT_3D('',#12270,#12271,#12272);+#12270 = CARTESIAN_POINT('',(2.35,2.275,0.595));+#12271 = DIRECTION('',(0.839949759337,0.,0.542664170358));+#12272 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#12273 = DEFINITIONAL_REPRESENTATION('',(#12274),#12278);+#12274 = LINE('',#12275,#12276);+#12275 = CARTESIAN_POINT('',(0.,-0.15));+#12276 = VECTOR('',#12277,1.);+#12277 = DIRECTION('',(0.,1.));+#12278 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12279 = ORIENTED_EDGE('',*,*,#12280,.F.);+#12280 = EDGE_CURVE('',#12281,#12253,#12283,.T.);+#12281 = VERTEX_POINT('',#12282);+#12282 = CARTESIAN_POINT('',(2.15,2.425,0.595));+#12283 = SURFACE_CURVE('',#12284,(#12288,#12295),.PCURVE_S1.);+#12284 = LINE('',#12285,#12286);+#12285 = CARTESIAN_POINT('',(2.15,2.425,0.595));+#12286 = VECTOR('',#12287,1.);+#12287 = DIRECTION('',(1.,0.,0.));+#12288 = PCURVE('',#12228,#12289);+#12289 = DEFINITIONAL_REPRESENTATION('',(#12290),#12294);+#12290 = LINE('',#12291,#12292);+#12291 = CARTESIAN_POINT('',(0.,0.15));+#12292 = VECTOR('',#12293,1.);+#12293 = DIRECTION('',(1.,0.));+#12294 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12295 = PCURVE('',#12296,#12301);+#12296 = PLANE('',#12297);+#12297 = AXIS2_PLACEMENT_3D('',#12298,#12299,#12300);+#12298 = CARTESIAN_POINT('',(2.634182274245,2.425,0.217942023204));+#12299 = DIRECTION('',(0.,1.,0.));+#12300 = DIRECTION('',(0.,0.,1.));+#12301 = DEFINITIONAL_REPRESENTATION('',(#12302),#12306);+#12302 = LINE('',#12303,#12304);+#12303 = CARTESIAN_POINT('',(0.377057976796,-0.484182274245));+#12304 = VECTOR('',#12305,1.);+#12305 = DIRECTION('',(0.,1.));+#12306 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12307 = ORIENTED_EDGE('',*,*,#12308,.T.);+#12308 = EDGE_CURVE('',#12281,#12218,#12309,.T.);+#12309 = SURFACE_CURVE('',#12310,(#12314,#12321),.PCURVE_S1.);+#12310 = LINE('',#12311,#12312);+#12311 = CARTESIAN_POINT('',(2.15,2.425,0.595));+#12312 = VECTOR('',#12313,1.);+#12313 = DIRECTION('',(0.,-1.,0.));+#12314 = PCURVE('',#12228,#12315);+#12315 = DEFINITIONAL_REPRESENTATION('',(#12316),#12320);+#12316 = LINE('',#12317,#12318);+#12317 = CARTESIAN_POINT('',(0.,0.15));+#12318 = VECTOR('',#12319,1.);+#12319 = DIRECTION('',(0.,-1.));+#12320 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12321 = PCURVE('',#12322,#12327);+#12322 = PLANE('',#12323);+#12323 = AXIS2_PLACEMENT_3D('',#12324,#12325,#12326);+#12324 = CARTESIAN_POINT('',(2.15,2.275,0.445));+#12325 = DIRECTION('',(-1.,0.,0.));+#12326 = DIRECTION('',(0.,0.,1.));+#12327 = DEFINITIONAL_REPRESENTATION('',(#12328),#12332);+#12328 = LINE('',#12329,#12330);+#12329 = CARTESIAN_POINT('',(0.15,0.15));+#12330 = VECTOR('',#12331,1.);+#12331 = DIRECTION('',(0.,-1.));+#12332 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12333 = ADVANCED_FACE('',(#12334),#12322,.T.);+#12334 = FACE_BOUND('',#12335,.T.);+#12335 = EDGE_LOOP('',(#12336,#12359,#12360,#12383));+#12336 = ORIENTED_EDGE('',*,*,#12337,.T.);+#12337 = EDGE_CURVE('',#12338,#12218,#12340,.T.);+#12338 = VERTEX_POINT('',#12339);+#12339 = CARTESIAN_POINT('',(2.15,2.125,0.445));+#12340 = SURFACE_CURVE('',#12341,(#12345,#12352),.PCURVE_S1.);+#12341 = LINE('',#12342,#12343);+#12342 = CARTESIAN_POINT('',(2.15,2.125,0.445));+#12343 = VECTOR('',#12344,1.);+#12344 = DIRECTION('',(0.,0.,1.));+#12345 = PCURVE('',#12322,#12346);+#12346 = DEFINITIONAL_REPRESENTATION('',(#12347),#12351);+#12347 = LINE('',#12348,#12349);+#12348 = CARTESIAN_POINT('',(0.,-0.15));+#12349 = VECTOR('',#12350,1.);+#12350 = DIRECTION('',(1.,0.));+#12351 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12352 = PCURVE('',#12240,#12353);+#12353 = DEFINITIONAL_REPRESENTATION('',(#12354),#12358);+#12354 = LINE('',#12355,#12356);+#12355 = CARTESIAN_POINT('',(0.227057976796,-0.484182274245));+#12356 = VECTOR('',#12357,1.);+#12357 = DIRECTION('',(1.,0.));+#12358 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12359 = ORIENTED_EDGE('',*,*,#12308,.F.);+#12360 = ORIENTED_EDGE('',*,*,#12361,.F.);+#12361 = EDGE_CURVE('',#12362,#12281,#12364,.T.);+#12362 = VERTEX_POINT('',#12363);+#12363 = CARTESIAN_POINT('',(2.15,2.425,0.445));+#12364 = SURFACE_CURVE('',#12365,(#12369,#12376),.PCURVE_S1.);+#12365 = LINE('',#12366,#12367);+#12366 = CARTESIAN_POINT('',(2.15,2.425,0.445));+#12367 = VECTOR('',#12368,1.);+#12368 = DIRECTION('',(0.,0.,1.));+#12369 = PCURVE('',#12322,#12370);+#12370 = DEFINITIONAL_REPRESENTATION('',(#12371),#12375);+#12371 = LINE('',#12372,#12373);+#12372 = CARTESIAN_POINT('',(0.,0.15));+#12373 = VECTOR('',#12374,1.);+#12374 = DIRECTION('',(1.,0.));+#12375 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12376 = PCURVE('',#12296,#12377);+#12377 = DEFINITIONAL_REPRESENTATION('',(#12378),#12382);+#12378 = LINE('',#12379,#12380);+#12379 = CARTESIAN_POINT('',(0.227057976796,-0.484182274245));+#12380 = VECTOR('',#12381,1.);+#12381 = DIRECTION('',(1.,0.));+#12382 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12383 = ORIENTED_EDGE('',*,*,#12384,.T.);+#12384 = EDGE_CURVE('',#12362,#12338,#12385,.T.);+#12385 = SURFACE_CURVE('',#12386,(#12390,#12397),.PCURVE_S1.);+#12386 = LINE('',#12387,#12388);+#12387 = CARTESIAN_POINT('',(2.15,2.425,0.445));+#12388 = VECTOR('',#12389,1.);+#12389 = DIRECTION('',(0.,-1.,0.));+#12390 = PCURVE('',#12322,#12391);+#12391 = DEFINITIONAL_REPRESENTATION('',(#12392),#12396);+#12392 = LINE('',#12393,#12394);+#12393 = CARTESIAN_POINT('',(0.,0.15));+#12394 = VECTOR('',#12395,1.);+#12395 = DIRECTION('',(0.,-1.));+#12396 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12397 = PCURVE('',#12398,#12403);+#12398 = PLANE('',#12399);+#12399 = AXIS2_PLACEMENT_3D('',#12400,#12401,#12402);+#12400 = CARTESIAN_POINT('',(2.2,2.275,0.445));+#12401 = DIRECTION('',(-0.,-0.,-1.));+#12402 = DIRECTION('',(-1.,0.,0.));+#12403 = DEFINITIONAL_REPRESENTATION('',(#12404),#12408);+#12404 = LINE('',#12405,#12406);+#12405 = CARTESIAN_POINT('',(5.E-02,0.15));+#12406 = VECTOR('',#12407,1.);+#12407 = DIRECTION('',(0.,-1.));+#12408 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12409 = ADVANCED_FACE('',(#12410),#12398,.T.);+#12410 = FACE_BOUND('',#12411,.T.);+#12411 = EDGE_LOOP('',(#12412,#12435,#12436,#12459));+#12412 = ORIENTED_EDGE('',*,*,#12413,.T.);+#12413 = EDGE_CURVE('',#12414,#12338,#12416,.T.);+#12414 = VERTEX_POINT('',#12415);+#12415 = CARTESIAN_POINT('',(2.2,2.125,0.445));+#12416 = SURFACE_CURVE('',#12417,(#12421,#12428),.PCURVE_S1.);+#12417 = LINE('',#12418,#12419);+#12418 = CARTESIAN_POINT('',(2.2,2.125,0.445));+#12419 = VECTOR('',#12420,1.);+#12420 = DIRECTION('',(-1.,0.,0.));+#12421 = PCURVE('',#12398,#12422);+#12422 = DEFINITIONAL_REPRESENTATION('',(#12423),#12427);+#12423 = LINE('',#12424,#12425);+#12424 = CARTESIAN_POINT('',(0.,-0.15));+#12425 = VECTOR('',#12426,1.);+#12426 = DIRECTION('',(1.,0.));+#12427 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12428 = PCURVE('',#12240,#12429);+#12429 = DEFINITIONAL_REPRESENTATION('',(#12430),#12434);+#12430 = LINE('',#12431,#12432);+#12431 = CARTESIAN_POINT('',(0.227057976796,-0.434182274245));+#12432 = VECTOR('',#12433,1.);+#12433 = DIRECTION('',(0.,-1.));+#12434 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12435 = ORIENTED_EDGE('',*,*,#12384,.F.);+#12436 = ORIENTED_EDGE('',*,*,#12437,.F.);+#12437 = EDGE_CURVE('',#12438,#12362,#12440,.T.);+#12438 = VERTEX_POINT('',#12439);+#12439 = CARTESIAN_POINT('',(2.2,2.425,0.445));+#12440 = SURFACE_CURVE('',#12441,(#12445,#12452),.PCURVE_S1.);+#12441 = LINE('',#12442,#12443);+#12442 = CARTESIAN_POINT('',(2.2,2.425,0.445));+#12443 = VECTOR('',#12444,1.);+#12444 = DIRECTION('',(-1.,0.,0.));+#12445 = PCURVE('',#12398,#12446);+#12446 = DEFINITIONAL_REPRESENTATION('',(#12447),#12451);+#12447 = LINE('',#12448,#12449);+#12448 = CARTESIAN_POINT('',(0.,0.15));+#12449 = VECTOR('',#12450,1.);+#12450 = DIRECTION('',(1.,0.));+#12451 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12452 = PCURVE('',#12296,#12453);+#12453 = DEFINITIONAL_REPRESENTATION('',(#12454),#12458);+#12454 = LINE('',#12455,#12456);+#12455 = CARTESIAN_POINT('',(0.227057976796,-0.434182274245));+#12456 = VECTOR('',#12457,1.);+#12457 = DIRECTION('',(0.,-1.));+#12458 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12459 = ORIENTED_EDGE('',*,*,#12460,.T.);+#12460 = EDGE_CURVE('',#12438,#12414,#12461,.T.);+#12461 = SURFACE_CURVE('',#12462,(#12466,#12473),.PCURVE_S1.);+#12462 = LINE('',#12463,#12464);+#12463 = CARTESIAN_POINT('',(2.2,2.425,0.445));+#12464 = VECTOR('',#12465,1.);+#12465 = DIRECTION('',(0.,-1.,0.));+#12466 = PCURVE('',#12398,#12467);+#12467 = DEFINITIONAL_REPRESENTATION('',(#12468),#12472);+#12468 = LINE('',#12469,#12470);+#12469 = CARTESIAN_POINT('',(0.,0.15));+#12470 = VECTOR('',#12471,1.);+#12471 = DIRECTION('',(0.,-1.));+#12472 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12473 = PCURVE('',#12474,#12479);+#12474 = PLANE('',#12475);+#12475 = AXIS2_PLACEMENT_3D('',#12476,#12477,#12478);+#12476 = CARTESIAN_POINT('',(2.4875,2.275,0.));+#12477 = DIRECTION('',(-0.839949759337,-0.,-0.542664170358));+#12478 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#12479 = DEFINITIONAL_REPRESENTATION('',(#12480),#12484);+#12480 = LINE('',#12481,#12482);+#12481 = CARTESIAN_POINT('',(0.529793591883,0.15));+#12482 = VECTOR('',#12483,1.);+#12483 = DIRECTION('',(0.,-1.));+#12484 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12485 = ADVANCED_FACE('',(#12486),#12474,.T.);+#12486 = FACE_BOUND('',#12487,.T.);+#12487 = EDGE_LOOP('',(#12488,#12518,#12539,#12540));+#12488 = ORIENTED_EDGE('',*,*,#12489,.F.);+#12489 = EDGE_CURVE('',#12490,#12492,#12494,.T.);+#12490 = VERTEX_POINT('',#12491);+#12491 = CARTESIAN_POINT('',(2.4875,2.125,0.));+#12492 = VERTEX_POINT('',#12493);+#12493 = CARTESIAN_POINT('',(2.4875,2.425,0.));+#12494 = SURFACE_CURVE('',#12495,(#12499,#12506),.PCURVE_S1.);+#12495 = LINE('',#12496,#12497);+#12496 = CARTESIAN_POINT('',(2.4875,2.125,0.));+#12497 = VECTOR('',#12498,1.);+#12498 = DIRECTION('',(0.,1.,0.));+#12499 = PCURVE('',#12474,#12500);+#12500 = DEFINITIONAL_REPRESENTATION('',(#12501),#12505);+#12501 = LINE('',#12502,#12503);+#12502 = CARTESIAN_POINT('',(0.,-0.15));+#12503 = VECTOR('',#12504,1.);+#12504 = DIRECTION('',(0.,1.));+#12505 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12506 = PCURVE('',#12507,#12512);+#12507 = PLANE('',#12508);+#12508 = AXIS2_PLACEMENT_3D('',#12509,#12510,#12511);+#12509 = CARTESIAN_POINT('',(3.205,2.275,0.));+#12510 = DIRECTION('',(-0.,-0.,-1.));+#12511 = DIRECTION('',(-1.,0.,0.));+#12512 = DEFINITIONAL_REPRESENTATION('',(#12513),#12517);+#12513 = LINE('',#12514,#12515);+#12514 = CARTESIAN_POINT('',(0.7175,-0.15));+#12515 = VECTOR('',#12516,1.);+#12516 = DIRECTION('',(0.,1.));+#12517 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12518 = ORIENTED_EDGE('',*,*,#12519,.T.);+#12519 = EDGE_CURVE('',#12490,#12414,#12520,.T.);+#12520 = SURFACE_CURVE('',#12521,(#12525,#12532),.PCURVE_S1.);+#12521 = LINE('',#12522,#12523);+#12522 = CARTESIAN_POINT('',(2.4875,2.125,0.));+#12523 = VECTOR('',#12524,1.);+#12524 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#12525 = PCURVE('',#12474,#12526);+#12526 = DEFINITIONAL_REPRESENTATION('',(#12527),#12531);+#12527 = LINE('',#12528,#12529);+#12528 = CARTESIAN_POINT('',(0.,-0.15));+#12529 = VECTOR('',#12530,1.);+#12530 = DIRECTION('',(1.,0.));+#12531 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12532 = PCURVE('',#12240,#12533);+#12533 = DEFINITIONAL_REPRESENTATION('',(#12534),#12538);+#12534 = LINE('',#12535,#12536);+#12535 = CARTESIAN_POINT('',(-0.217942023204,-0.146682274245));+#12536 = VECTOR('',#12537,1.);+#12537 = DIRECTION('',(0.839949759337,-0.542664170358));+#12538 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12539 = ORIENTED_EDGE('',*,*,#12460,.F.);+#12540 = ORIENTED_EDGE('',*,*,#12541,.F.);+#12541 = EDGE_CURVE('',#12492,#12438,#12542,.T.);+#12542 = SURFACE_CURVE('',#12543,(#12547,#12554),.PCURVE_S1.);+#12543 = LINE('',#12544,#12545);+#12544 = CARTESIAN_POINT('',(2.4875,2.425,0.));+#12545 = VECTOR('',#12546,1.);+#12546 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#12547 = PCURVE('',#12474,#12548);+#12548 = DEFINITIONAL_REPRESENTATION('',(#12549),#12553);+#12549 = LINE('',#12550,#12551);+#12550 = CARTESIAN_POINT('',(0.,0.15));+#12551 = VECTOR('',#12552,1.);+#12552 = DIRECTION('',(1.,0.));+#12553 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12554 = PCURVE('',#12296,#12555);+#12555 = DEFINITIONAL_REPRESENTATION('',(#12556),#12560);+#12556 = LINE('',#12557,#12558);+#12557 = CARTESIAN_POINT('',(-0.217942023204,-0.146682274245));+#12558 = VECTOR('',#12559,1.);+#12559 = DIRECTION('',(0.839949759337,-0.542664170358));+#12560 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12561 = ADVANCED_FACE('',(#12562),#12507,.T.);+#12562 = FACE_BOUND('',#12563,.T.);+#12563 = EDGE_LOOP('',(#12564,#12594,#12615,#12616));+#12564 = ORIENTED_EDGE('',*,*,#12565,.F.);+#12565 = EDGE_CURVE('',#12566,#12568,#12570,.T.);+#12566 = VERTEX_POINT('',#12567);+#12567 = CARTESIAN_POINT('',(3.205,2.125,0.));+#12568 = VERTEX_POINT('',#12569);+#12569 = CARTESIAN_POINT('',(3.205,2.425,0.));+#12570 = SURFACE_CURVE('',#12571,(#12575,#12582),.PCURVE_S1.);+#12571 = LINE('',#12572,#12573);+#12572 = CARTESIAN_POINT('',(3.205,2.125,0.));+#12573 = VECTOR('',#12574,1.);+#12574 = DIRECTION('',(0.,1.,0.));+#12575 = PCURVE('',#12507,#12576);+#12576 = DEFINITIONAL_REPRESENTATION('',(#12577),#12581);+#12577 = LINE('',#12578,#12579);+#12578 = CARTESIAN_POINT('',(0.,-0.15));+#12579 = VECTOR('',#12580,1.);+#12580 = DIRECTION('',(0.,1.));+#12581 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12582 = PCURVE('',#12583,#12588);+#12583 = PLANE('',#12584);+#12584 = AXIS2_PLACEMENT_3D('',#12585,#12586,#12587);+#12585 = CARTESIAN_POINT('',(3.205,2.275,0.15));+#12586 = DIRECTION('',(1.,0.,0.));+#12587 = DIRECTION('',(0.,0.,-1.));+#12588 = DEFINITIONAL_REPRESENTATION('',(#12589),#12593);+#12589 = LINE('',#12590,#12591);+#12590 = CARTESIAN_POINT('',(0.15,-0.15));+#12591 = VECTOR('',#12592,1.);+#12592 = DIRECTION('',(0.,1.));+#12593 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12594 = ORIENTED_EDGE('',*,*,#12595,.T.);+#12595 = EDGE_CURVE('',#12566,#12490,#12596,.T.);+#12596 = SURFACE_CURVE('',#12597,(#12601,#12608),.PCURVE_S1.);+#12597 = LINE('',#12598,#12599);+#12598 = CARTESIAN_POINT('',(3.205,2.125,0.));+#12599 = VECTOR('',#12600,1.);+#12600 = DIRECTION('',(-1.,0.,0.));+#12601 = PCURVE('',#12507,#12602);+#12602 = DEFINITIONAL_REPRESENTATION('',(#12603),#12607);+#12603 = LINE('',#12604,#12605);+#12604 = CARTESIAN_POINT('',(0.,-0.15));+#12605 = VECTOR('',#12606,1.);+#12606 = DIRECTION('',(1.,0.));+#12607 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12608 = PCURVE('',#12240,#12609);+#12609 = DEFINITIONAL_REPRESENTATION('',(#12610),#12614);+#12610 = LINE('',#12611,#12612);+#12611 = CARTESIAN_POINT('',(-0.217942023204,0.570817725755));+#12612 = VECTOR('',#12613,1.);+#12613 = DIRECTION('',(0.,-1.));+#12614 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12615 = ORIENTED_EDGE('',*,*,#12489,.T.);+#12616 = ORIENTED_EDGE('',*,*,#12617,.F.);+#12617 = EDGE_CURVE('',#12568,#12492,#12618,.T.);+#12618 = SURFACE_CURVE('',#12619,(#12623,#12630),.PCURVE_S1.);+#12619 = LINE('',#12620,#12621);+#12620 = CARTESIAN_POINT('',(3.205,2.425,0.));+#12621 = VECTOR('',#12622,1.);+#12622 = DIRECTION('',(-1.,0.,0.));+#12623 = PCURVE('',#12507,#12624);+#12624 = DEFINITIONAL_REPRESENTATION('',(#12625),#12629);+#12625 = LINE('',#12626,#12627);+#12626 = CARTESIAN_POINT('',(0.,0.15));+#12627 = VECTOR('',#12628,1.);+#12628 = DIRECTION('',(1.,0.));+#12629 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12630 = PCURVE('',#12296,#12631);+#12631 = DEFINITIONAL_REPRESENTATION('',(#12632),#12636);+#12632 = LINE('',#12633,#12634);+#12633 = CARTESIAN_POINT('',(-0.217942023204,0.570817725755));+#12634 = VECTOR('',#12635,1.);+#12635 = DIRECTION('',(0.,-1.));+#12636 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12637 = ADVANCED_FACE('',(#12638),#12583,.T.);+#12638 = FACE_BOUND('',#12639,.T.);+#12639 = EDGE_LOOP('',(#12640,#12670,#12691,#12692));+#12640 = ORIENTED_EDGE('',*,*,#12641,.F.);+#12641 = EDGE_CURVE('',#12642,#12644,#12646,.T.);+#12642 = VERTEX_POINT('',#12643);+#12643 = CARTESIAN_POINT('',(3.205,2.125,0.15));+#12644 = VERTEX_POINT('',#12645);+#12645 = CARTESIAN_POINT('',(3.205,2.425,0.15));+#12646 = SURFACE_CURVE('',#12647,(#12651,#12658),.PCURVE_S1.);+#12647 = LINE('',#12648,#12649);+#12648 = CARTESIAN_POINT('',(3.205,2.125,0.15));+#12649 = VECTOR('',#12650,1.);+#12650 = DIRECTION('',(0.,1.,0.));+#12651 = PCURVE('',#12583,#12652);+#12652 = DEFINITIONAL_REPRESENTATION('',(#12653),#12657);+#12653 = LINE('',#12654,#12655);+#12654 = CARTESIAN_POINT('',(0.,-0.15));+#12655 = VECTOR('',#12656,1.);+#12656 = DIRECTION('',(0.,1.));+#12657 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12658 = PCURVE('',#12659,#12664);+#12659 = PLANE('',#12660);+#12660 = AXIS2_PLACEMENT_3D('',#12661,#12662,#12663);+#12661 = CARTESIAN_POINT('',(2.6375,2.275,0.15));+#12662 = DIRECTION('',(0.,0.,1.));+#12663 = DIRECTION('',(1.,0.,0.));+#12664 = DEFINITIONAL_REPRESENTATION('',(#12665),#12669);+#12665 = LINE('',#12666,#12667);+#12666 = CARTESIAN_POINT('',(0.5675,-0.15));+#12667 = VECTOR('',#12668,1.);+#12668 = DIRECTION('',(0.,1.));+#12669 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12670 = ORIENTED_EDGE('',*,*,#12671,.T.);+#12671 = EDGE_CURVE('',#12642,#12566,#12672,.T.);+#12672 = SURFACE_CURVE('',#12673,(#12677,#12684),.PCURVE_S1.);+#12673 = LINE('',#12674,#12675);+#12674 = CARTESIAN_POINT('',(3.205,2.125,0.15));+#12675 = VECTOR('',#12676,1.);+#12676 = DIRECTION('',(0.,0.,-1.));+#12677 = PCURVE('',#12583,#12678);+#12678 = DEFINITIONAL_REPRESENTATION('',(#12679),#12683);+#12679 = LINE('',#12680,#12681);+#12680 = CARTESIAN_POINT('',(0.,-0.15));+#12681 = VECTOR('',#12682,1.);+#12682 = DIRECTION('',(1.,0.));+#12683 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12684 = PCURVE('',#12240,#12685);+#12685 = DEFINITIONAL_REPRESENTATION('',(#12686),#12690);+#12686 = LINE('',#12687,#12688);+#12687 = CARTESIAN_POINT('',(-6.7942023204E-02,0.570817725755));+#12688 = VECTOR('',#12689,1.);+#12689 = DIRECTION('',(-1.,0.));+#12690 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12691 = ORIENTED_EDGE('',*,*,#12565,.T.);+#12692 = ORIENTED_EDGE('',*,*,#12693,.F.);+#12693 = EDGE_CURVE('',#12644,#12568,#12694,.T.);+#12694 = SURFACE_CURVE('',#12695,(#12699,#12706),.PCURVE_S1.);+#12695 = LINE('',#12696,#12697);+#12696 = CARTESIAN_POINT('',(3.205,2.425,0.15));+#12697 = VECTOR('',#12698,1.);+#12698 = DIRECTION('',(0.,0.,-1.));+#12699 = PCURVE('',#12583,#12700);+#12700 = DEFINITIONAL_REPRESENTATION('',(#12701),#12705);+#12701 = LINE('',#12702,#12703);+#12702 = CARTESIAN_POINT('',(0.,0.15));+#12703 = VECTOR('',#12704,1.);+#12704 = DIRECTION('',(1.,0.));+#12705 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12706 = PCURVE('',#12296,#12707);+#12707 = DEFINITIONAL_REPRESENTATION('',(#12708),#12712);+#12708 = LINE('',#12709,#12710);+#12709 = CARTESIAN_POINT('',(-6.7942023204E-02,0.570817725755));+#12710 = VECTOR('',#12711,1.);+#12711 = DIRECTION('',(-1.,0.));+#12712 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12713 = ADVANCED_FACE('',(#12714),#12659,.T.);+#12714 = FACE_BOUND('',#12715,.T.);+#12715 = EDGE_LOOP('',(#12716,#12741,#12762,#12763));+#12716 = ORIENTED_EDGE('',*,*,#12717,.F.);+#12717 = EDGE_CURVE('',#12718,#12720,#12722,.T.);+#12718 = VERTEX_POINT('',#12719);+#12719 = CARTESIAN_POINT('',(2.6375,2.125,0.15));+#12720 = VERTEX_POINT('',#12721);+#12721 = CARTESIAN_POINT('',(2.6375,2.425,0.15));+#12722 = SURFACE_CURVE('',#12723,(#12727,#12734),.PCURVE_S1.);+#12723 = LINE('',#12724,#12725);+#12724 = CARTESIAN_POINT('',(2.6375,2.125,0.15));+#12725 = VECTOR('',#12726,1.);+#12726 = DIRECTION('',(0.,1.,0.));+#12727 = PCURVE('',#12659,#12728);+#12728 = DEFINITIONAL_REPRESENTATION('',(#12729),#12733);+#12729 = LINE('',#12730,#12731);+#12730 = CARTESIAN_POINT('',(0.,-0.15));+#12731 = VECTOR('',#12732,1.);+#12732 = DIRECTION('',(0.,1.));+#12733 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12734 = PCURVE('',#12268,#12735);+#12735 = DEFINITIONAL_REPRESENTATION('',(#12736),#12740);+#12736 = LINE('',#12737,#12738);+#12737 = CARTESIAN_POINT('',(0.529793591883,-0.15));+#12738 = VECTOR('',#12739,1.);+#12739 = DIRECTION('',(0.,1.));+#12740 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12741 = ORIENTED_EDGE('',*,*,#12742,.T.);+#12742 = EDGE_CURVE('',#12718,#12642,#12743,.T.);+#12743 = SURFACE_CURVE('',#12744,(#12748,#12755),.PCURVE_S1.);+#12744 = LINE('',#12745,#12746);+#12745 = CARTESIAN_POINT('',(2.6375,2.125,0.15));+#12746 = VECTOR('',#12747,1.);+#12747 = DIRECTION('',(1.,0.,0.));+#12748 = PCURVE('',#12659,#12749);+#12749 = DEFINITIONAL_REPRESENTATION('',(#12750),#12754);+#12750 = LINE('',#12751,#12752);+#12751 = CARTESIAN_POINT('',(0.,-0.15));+#12752 = VECTOR('',#12753,1.);+#12753 = DIRECTION('',(1.,0.));+#12754 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12755 = PCURVE('',#12240,#12756);+#12756 = DEFINITIONAL_REPRESENTATION('',(#12757),#12761);+#12757 = LINE('',#12758,#12759);+#12758 = CARTESIAN_POINT('',(-6.7942023204E-02,3.317725755E-03));+#12759 = VECTOR('',#12760,1.);+#12760 = DIRECTION('',(0.,1.));+#12761 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12762 = ORIENTED_EDGE('',*,*,#12641,.T.);+#12763 = ORIENTED_EDGE('',*,*,#12764,.F.);+#12764 = EDGE_CURVE('',#12720,#12644,#12765,.T.);+#12765 = SURFACE_CURVE('',#12766,(#12770,#12777),.PCURVE_S1.);+#12766 = LINE('',#12767,#12768);+#12767 = CARTESIAN_POINT('',(2.6375,2.425,0.15));+#12768 = VECTOR('',#12769,1.);+#12769 = DIRECTION('',(1.,0.,0.));+#12770 = PCURVE('',#12659,#12771);+#12771 = DEFINITIONAL_REPRESENTATION('',(#12772),#12776);+#12772 = LINE('',#12773,#12774);+#12773 = CARTESIAN_POINT('',(0.,0.15));+#12774 = VECTOR('',#12775,1.);+#12775 = DIRECTION('',(1.,0.));+#12776 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12777 = PCURVE('',#12296,#12778);+#12778 = DEFINITIONAL_REPRESENTATION('',(#12779),#12783);+#12779 = LINE('',#12780,#12781);+#12780 = CARTESIAN_POINT('',(-6.7942023204E-02,3.317725755E-03));+#12781 = VECTOR('',#12782,1.);+#12782 = DIRECTION('',(0.,1.));+#12783 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12784 = ADVANCED_FACE('',(#12785),#12296,.T.);+#12785 = FACE_BOUND('',#12786,.T.);+#12786 = EDGE_LOOP('',(#12787,#12788,#12809,#12810,#12811,#12812,#12813,+ #12814));+#12787 = ORIENTED_EDGE('',*,*,#12280,.T.);+#12788 = ORIENTED_EDGE('',*,*,#12789,.T.);+#12789 = EDGE_CURVE('',#12253,#12720,#12790,.T.);+#12790 = SURFACE_CURVE('',#12791,(#12795,#12802),.PCURVE_S1.);+#12791 = LINE('',#12792,#12793);+#12792 = CARTESIAN_POINT('',(2.35,2.425,0.595));+#12793 = VECTOR('',#12794,1.);+#12794 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#12795 = PCURVE('',#12296,#12796);+#12796 = DEFINITIONAL_REPRESENTATION('',(#12797),#12801);+#12797 = LINE('',#12798,#12799);+#12798 = CARTESIAN_POINT('',(0.377057976796,-0.284182274245));+#12799 = VECTOR('',#12800,1.);+#12800 = DIRECTION('',(-0.839949759337,0.542664170358));+#12801 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12802 = PCURVE('',#12268,#12803);+#12803 = DEFINITIONAL_REPRESENTATION('',(#12804),#12808);+#12804 = LINE('',#12805,#12806);+#12805 = CARTESIAN_POINT('',(0.,0.15));+#12806 = VECTOR('',#12807,1.);+#12807 = DIRECTION('',(1.,0.));+#12808 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12809 = ORIENTED_EDGE('',*,*,#12764,.T.);+#12810 = ORIENTED_EDGE('',*,*,#12693,.T.);+#12811 = ORIENTED_EDGE('',*,*,#12617,.T.);+#12812 = ORIENTED_EDGE('',*,*,#12541,.T.);+#12813 = ORIENTED_EDGE('',*,*,#12437,.T.);+#12814 = ORIENTED_EDGE('',*,*,#12361,.T.);+#12815 = ADVANCED_FACE('',(#12816),#12268,.T.);+#12816 = FACE_BOUND('',#12817,.T.);+#12817 = EDGE_LOOP('',(#12818,#12819,#12840,#12841));+#12818 = ORIENTED_EDGE('',*,*,#12252,.F.);+#12819 = ORIENTED_EDGE('',*,*,#12820,.T.);+#12820 = EDGE_CURVE('',#12220,#12718,#12821,.T.);+#12821 = SURFACE_CURVE('',#12822,(#12826,#12833),.PCURVE_S1.);+#12822 = LINE('',#12823,#12824);+#12823 = CARTESIAN_POINT('',(2.35,2.125,0.595));+#12824 = VECTOR('',#12825,1.);+#12825 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#12826 = PCURVE('',#12268,#12827);+#12827 = DEFINITIONAL_REPRESENTATION('',(#12828),#12832);+#12828 = LINE('',#12829,#12830);+#12829 = CARTESIAN_POINT('',(0.,-0.15));+#12830 = VECTOR('',#12831,1.);+#12831 = DIRECTION('',(1.,0.));+#12832 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12833 = PCURVE('',#12240,#12834);+#12834 = DEFINITIONAL_REPRESENTATION('',(#12835),#12839);+#12835 = LINE('',#12836,#12837);+#12836 = CARTESIAN_POINT('',(0.377057976796,-0.284182274245));+#12837 = VECTOR('',#12838,1.);+#12838 = DIRECTION('',(-0.839949759337,0.542664170358));+#12839 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12840 = ORIENTED_EDGE('',*,*,#12717,.T.);+#12841 = ORIENTED_EDGE('',*,*,#12789,.F.);+#12842 = ADVANCED_FACE('',(#12843),#12240,.F.);+#12843 = FACE_BOUND('',#12844,.F.);+#12844 = EDGE_LOOP('',(#12845,#12846,#12847,#12848,#12849,#12850,#12851,+ #12852));+#12845 = ORIENTED_EDGE('',*,*,#12217,.T.);+#12846 = ORIENTED_EDGE('',*,*,#12820,.T.);+#12847 = ORIENTED_EDGE('',*,*,#12742,.T.);+#12848 = ORIENTED_EDGE('',*,*,#12671,.T.);+#12849 = ORIENTED_EDGE('',*,*,#12595,.T.);+#12850 = ORIENTED_EDGE('',*,*,#12519,.T.);+#12851 = ORIENTED_EDGE('',*,*,#12413,.T.);+#12852 = ORIENTED_EDGE('',*,*,#12337,.T.);+#12853 = MANIFOLD_SOLID_BREP('',#12854);+#12854 = CLOSED_SHELL('',(#12855,#12975,#13051,#13127,#13203,#13279,+ #13355,#13426,#13457,#13484));+#12855 = ADVANCED_FACE('',(#12856),#12870,.T.);+#12856 = FACE_BOUND('',#12857,.T.);+#12857 = EDGE_LOOP('',(#12858,#12893,#12921,#12949));+#12858 = ORIENTED_EDGE('',*,*,#12859,.T.);+#12859 = EDGE_CURVE('',#12860,#12862,#12864,.T.);+#12860 = VERTEX_POINT('',#12861);+#12861 = CARTESIAN_POINT('',(2.15,2.775,0.595));+#12862 = VERTEX_POINT('',#12863);+#12863 = CARTESIAN_POINT('',(2.35,2.775,0.595));+#12864 = SURFACE_CURVE('',#12865,(#12869,#12881),.PCURVE_S1.);+#12865 = LINE('',#12866,#12867);+#12866 = CARTESIAN_POINT('',(2.15,2.775,0.595));+#12867 = VECTOR('',#12868,1.);+#12868 = DIRECTION('',(1.,0.,0.));+#12869 = PCURVE('',#12870,#12875);+#12870 = PLANE('',#12871);+#12871 = AXIS2_PLACEMENT_3D('',#12872,#12873,#12874);+#12872 = CARTESIAN_POINT('',(2.15,2.925,0.595));+#12873 = DIRECTION('',(0.,0.,1.));+#12874 = DIRECTION('',(1.,0.,0.));+#12875 = DEFINITIONAL_REPRESENTATION('',(#12876),#12880);+#12876 = LINE('',#12877,#12878);+#12877 = CARTESIAN_POINT('',(0.,-0.15));+#12878 = VECTOR('',#12879,1.);+#12879 = DIRECTION('',(1.,0.));+#12880 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12881 = PCURVE('',#12882,#12887);+#12882 = PLANE('',#12883);+#12883 = AXIS2_PLACEMENT_3D('',#12884,#12885,#12886);+#12884 = CARTESIAN_POINT('',(2.634182274245,2.775,0.217942023204));+#12885 = DIRECTION('',(0.,1.,0.));+#12886 = DIRECTION('',(0.,0.,1.));+#12887 = DEFINITIONAL_REPRESENTATION('',(#12888),#12892);+#12888 = LINE('',#12889,#12890);+#12889 = CARTESIAN_POINT('',(0.377057976796,-0.484182274245));+#12890 = VECTOR('',#12891,1.);+#12891 = DIRECTION('',(0.,1.));+#12892 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12893 = ORIENTED_EDGE('',*,*,#12894,.T.);+#12894 = EDGE_CURVE('',#12862,#12895,#12897,.T.);+#12895 = VERTEX_POINT('',#12896);+#12896 = CARTESIAN_POINT('',(2.35,3.075,0.595));+#12897 = SURFACE_CURVE('',#12898,(#12902,#12909),.PCURVE_S1.);+#12898 = LINE('',#12899,#12900);+#12899 = CARTESIAN_POINT('',(2.35,2.775,0.595));+#12900 = VECTOR('',#12901,1.);+#12901 = DIRECTION('',(0.,1.,0.));+#12902 = PCURVE('',#12870,#12903);+#12903 = DEFINITIONAL_REPRESENTATION('',(#12904),#12908);+#12904 = LINE('',#12905,#12906);+#12905 = CARTESIAN_POINT('',(0.2,-0.15));+#12906 = VECTOR('',#12907,1.);+#12907 = DIRECTION('',(0.,1.));+#12908 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12909 = PCURVE('',#12910,#12915);+#12910 = PLANE('',#12911);+#12911 = AXIS2_PLACEMENT_3D('',#12912,#12913,#12914);+#12912 = CARTESIAN_POINT('',(2.35,2.925,0.595));+#12913 = DIRECTION('',(0.839949759337,0.,0.542664170358));+#12914 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#12915 = DEFINITIONAL_REPRESENTATION('',(#12916),#12920);+#12916 = LINE('',#12917,#12918);+#12917 = CARTESIAN_POINT('',(0.,-0.15));+#12918 = VECTOR('',#12919,1.);+#12919 = DIRECTION('',(0.,1.));+#12920 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12921 = ORIENTED_EDGE('',*,*,#12922,.F.);+#12922 = EDGE_CURVE('',#12923,#12895,#12925,.T.);+#12923 = VERTEX_POINT('',#12924);+#12924 = CARTESIAN_POINT('',(2.15,3.075,0.595));+#12925 = SURFACE_CURVE('',#12926,(#12930,#12937),.PCURVE_S1.);+#12926 = LINE('',#12927,#12928);+#12927 = CARTESIAN_POINT('',(2.15,3.075,0.595));+#12928 = VECTOR('',#12929,1.);+#12929 = DIRECTION('',(1.,0.,0.));+#12930 = PCURVE('',#12870,#12931);+#12931 = DEFINITIONAL_REPRESENTATION('',(#12932),#12936);+#12932 = LINE('',#12933,#12934);+#12933 = CARTESIAN_POINT('',(0.,0.15));+#12934 = VECTOR('',#12935,1.);+#12935 = DIRECTION('',(1.,0.));+#12936 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12937 = PCURVE('',#12938,#12943);+#12938 = PLANE('',#12939);+#12939 = AXIS2_PLACEMENT_3D('',#12940,#12941,#12942);+#12940 = CARTESIAN_POINT('',(2.634182274245,3.075,0.217942023204));+#12941 = DIRECTION('',(0.,1.,0.));+#12942 = DIRECTION('',(0.,0.,1.));+#12943 = DEFINITIONAL_REPRESENTATION('',(#12944),#12948);+#12944 = LINE('',#12945,#12946);+#12945 = CARTESIAN_POINT('',(0.377057976796,-0.484182274245));+#12946 = VECTOR('',#12947,1.);+#12947 = DIRECTION('',(0.,1.));+#12948 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12949 = ORIENTED_EDGE('',*,*,#12950,.T.);+#12950 = EDGE_CURVE('',#12923,#12860,#12951,.T.);+#12951 = SURFACE_CURVE('',#12952,(#12956,#12963),.PCURVE_S1.);+#12952 = LINE('',#12953,#12954);+#12953 = CARTESIAN_POINT('',(2.15,3.075,0.595));+#12954 = VECTOR('',#12955,1.);+#12955 = DIRECTION('',(0.,-1.,0.));+#12956 = PCURVE('',#12870,#12957);+#12957 = DEFINITIONAL_REPRESENTATION('',(#12958),#12962);+#12958 = LINE('',#12959,#12960);+#12959 = CARTESIAN_POINT('',(0.,0.15));+#12960 = VECTOR('',#12961,1.);+#12961 = DIRECTION('',(0.,-1.));+#12962 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12963 = PCURVE('',#12964,#12969);+#12964 = PLANE('',#12965);+#12965 = AXIS2_PLACEMENT_3D('',#12966,#12967,#12968);+#12966 = CARTESIAN_POINT('',(2.15,2.925,0.445));+#12967 = DIRECTION('',(-1.,0.,0.));+#12968 = DIRECTION('',(0.,0.,1.));+#12969 = DEFINITIONAL_REPRESENTATION('',(#12970),#12974);+#12970 = LINE('',#12971,#12972);+#12971 = CARTESIAN_POINT('',(0.15,0.15));+#12972 = VECTOR('',#12973,1.);+#12973 = DIRECTION('',(0.,-1.));+#12974 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12975 = ADVANCED_FACE('',(#12976),#12964,.T.);+#12976 = FACE_BOUND('',#12977,.T.);+#12977 = EDGE_LOOP('',(#12978,#13001,#13002,#13025));+#12978 = ORIENTED_EDGE('',*,*,#12979,.T.);+#12979 = EDGE_CURVE('',#12980,#12860,#12982,.T.);+#12980 = VERTEX_POINT('',#12981);+#12981 = CARTESIAN_POINT('',(2.15,2.775,0.445));+#12982 = SURFACE_CURVE('',#12983,(#12987,#12994),.PCURVE_S1.);+#12983 = LINE('',#12984,#12985);+#12984 = CARTESIAN_POINT('',(2.15,2.775,0.445));+#12985 = VECTOR('',#12986,1.);+#12986 = DIRECTION('',(0.,0.,1.));+#12987 = PCURVE('',#12964,#12988);+#12988 = DEFINITIONAL_REPRESENTATION('',(#12989),#12993);+#12989 = LINE('',#12990,#12991);+#12990 = CARTESIAN_POINT('',(0.,-0.15));+#12991 = VECTOR('',#12992,1.);+#12992 = DIRECTION('',(1.,0.));+#12993 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12994 = PCURVE('',#12882,#12995);+#12995 = DEFINITIONAL_REPRESENTATION('',(#12996),#13000);+#12996 = LINE('',#12997,#12998);+#12997 = CARTESIAN_POINT('',(0.227057976796,-0.484182274245));+#12998 = VECTOR('',#12999,1.);+#12999 = DIRECTION('',(1.,0.));+#13000 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13001 = ORIENTED_EDGE('',*,*,#12950,.F.);+#13002 = ORIENTED_EDGE('',*,*,#13003,.F.);+#13003 = EDGE_CURVE('',#13004,#12923,#13006,.T.);+#13004 = VERTEX_POINT('',#13005);+#13005 = CARTESIAN_POINT('',(2.15,3.075,0.445));+#13006 = SURFACE_CURVE('',#13007,(#13011,#13018),.PCURVE_S1.);+#13007 = LINE('',#13008,#13009);+#13008 = CARTESIAN_POINT('',(2.15,3.075,0.445));+#13009 = VECTOR('',#13010,1.);+#13010 = DIRECTION('',(0.,0.,1.));+#13011 = PCURVE('',#12964,#13012);+#13012 = DEFINITIONAL_REPRESENTATION('',(#13013),#13017);+#13013 = LINE('',#13014,#13015);+#13014 = CARTESIAN_POINT('',(0.,0.15));+#13015 = VECTOR('',#13016,1.);+#13016 = DIRECTION('',(1.,0.));+#13017 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13018 = PCURVE('',#12938,#13019);+#13019 = DEFINITIONAL_REPRESENTATION('',(#13020),#13024);+#13020 = LINE('',#13021,#13022);+#13021 = CARTESIAN_POINT('',(0.227057976796,-0.484182274245));+#13022 = VECTOR('',#13023,1.);+#13023 = DIRECTION('',(1.,0.));+#13024 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13025 = ORIENTED_EDGE('',*,*,#13026,.T.);+#13026 = EDGE_CURVE('',#13004,#12980,#13027,.T.);+#13027 = SURFACE_CURVE('',#13028,(#13032,#13039),.PCURVE_S1.);+#13028 = LINE('',#13029,#13030);+#13029 = CARTESIAN_POINT('',(2.15,3.075,0.445));+#13030 = VECTOR('',#13031,1.);+#13031 = DIRECTION('',(0.,-1.,0.));+#13032 = PCURVE('',#12964,#13033);+#13033 = DEFINITIONAL_REPRESENTATION('',(#13034),#13038);+#13034 = LINE('',#13035,#13036);+#13035 = CARTESIAN_POINT('',(0.,0.15));+#13036 = VECTOR('',#13037,1.);+#13037 = DIRECTION('',(0.,-1.));+#13038 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13039 = PCURVE('',#13040,#13045);+#13040 = PLANE('',#13041);+#13041 = AXIS2_PLACEMENT_3D('',#13042,#13043,#13044);+#13042 = CARTESIAN_POINT('',(2.2,2.925,0.445));+#13043 = DIRECTION('',(-0.,-0.,-1.));+#13044 = DIRECTION('',(-1.,0.,0.));+#13045 = DEFINITIONAL_REPRESENTATION('',(#13046),#13050);+#13046 = LINE('',#13047,#13048);+#13047 = CARTESIAN_POINT('',(5.E-02,0.15));+#13048 = VECTOR('',#13049,1.);+#13049 = DIRECTION('',(0.,-1.));+#13050 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13051 = ADVANCED_FACE('',(#13052),#13040,.T.);+#13052 = FACE_BOUND('',#13053,.T.);+#13053 = EDGE_LOOP('',(#13054,#13077,#13078,#13101));+#13054 = ORIENTED_EDGE('',*,*,#13055,.T.);+#13055 = EDGE_CURVE('',#13056,#12980,#13058,.T.);+#13056 = VERTEX_POINT('',#13057);+#13057 = CARTESIAN_POINT('',(2.2,2.775,0.445));+#13058 = SURFACE_CURVE('',#13059,(#13063,#13070),.PCURVE_S1.);+#13059 = LINE('',#13060,#13061);+#13060 = CARTESIAN_POINT('',(2.2,2.775,0.445));+#13061 = VECTOR('',#13062,1.);+#13062 = DIRECTION('',(-1.,0.,0.));+#13063 = PCURVE('',#13040,#13064);+#13064 = DEFINITIONAL_REPRESENTATION('',(#13065),#13069);+#13065 = LINE('',#13066,#13067);+#13066 = CARTESIAN_POINT('',(0.,-0.15));+#13067 = VECTOR('',#13068,1.);+#13068 = DIRECTION('',(1.,0.));+#13069 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13070 = PCURVE('',#12882,#13071);+#13071 = DEFINITIONAL_REPRESENTATION('',(#13072),#13076);+#13072 = LINE('',#13073,#13074);+#13073 = CARTESIAN_POINT('',(0.227057976796,-0.434182274245));+#13074 = VECTOR('',#13075,1.);+#13075 = DIRECTION('',(0.,-1.));+#13076 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13077 = ORIENTED_EDGE('',*,*,#13026,.F.);+#13078 = ORIENTED_EDGE('',*,*,#13079,.F.);+#13079 = EDGE_CURVE('',#13080,#13004,#13082,.T.);+#13080 = VERTEX_POINT('',#13081);+#13081 = CARTESIAN_POINT('',(2.2,3.075,0.445));+#13082 = SURFACE_CURVE('',#13083,(#13087,#13094),.PCURVE_S1.);+#13083 = LINE('',#13084,#13085);+#13084 = CARTESIAN_POINT('',(2.2,3.075,0.445));+#13085 = VECTOR('',#13086,1.);+#13086 = DIRECTION('',(-1.,0.,0.));+#13087 = PCURVE('',#13040,#13088);+#13088 = DEFINITIONAL_REPRESENTATION('',(#13089),#13093);+#13089 = LINE('',#13090,#13091);+#13090 = CARTESIAN_POINT('',(0.,0.15));+#13091 = VECTOR('',#13092,1.);+#13092 = DIRECTION('',(1.,0.));+#13093 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13094 = PCURVE('',#12938,#13095);+#13095 = DEFINITIONAL_REPRESENTATION('',(#13096),#13100);+#13096 = LINE('',#13097,#13098);+#13097 = CARTESIAN_POINT('',(0.227057976796,-0.434182274245));+#13098 = VECTOR('',#13099,1.);+#13099 = DIRECTION('',(0.,-1.));+#13100 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13101 = ORIENTED_EDGE('',*,*,#13102,.T.);+#13102 = EDGE_CURVE('',#13080,#13056,#13103,.T.);+#13103 = SURFACE_CURVE('',#13104,(#13108,#13115),.PCURVE_S1.);+#13104 = LINE('',#13105,#13106);+#13105 = CARTESIAN_POINT('',(2.2,3.075,0.445));+#13106 = VECTOR('',#13107,1.);+#13107 = DIRECTION('',(0.,-1.,0.));+#13108 = PCURVE('',#13040,#13109);+#13109 = DEFINITIONAL_REPRESENTATION('',(#13110),#13114);+#13110 = LINE('',#13111,#13112);+#13111 = CARTESIAN_POINT('',(0.,0.15));+#13112 = VECTOR('',#13113,1.);+#13113 = DIRECTION('',(0.,-1.));+#13114 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13115 = PCURVE('',#13116,#13121);+#13116 = PLANE('',#13117);+#13117 = AXIS2_PLACEMENT_3D('',#13118,#13119,#13120);+#13118 = CARTESIAN_POINT('',(2.4875,2.925,0.));+#13119 = DIRECTION('',(-0.839949759337,-0.,-0.542664170358));+#13120 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#13121 = DEFINITIONAL_REPRESENTATION('',(#13122),#13126);+#13122 = LINE('',#13123,#13124);+#13123 = CARTESIAN_POINT('',(0.529793591883,0.15));+#13124 = VECTOR('',#13125,1.);+#13125 = DIRECTION('',(0.,-1.));+#13126 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13127 = ADVANCED_FACE('',(#13128),#13116,.T.);+#13128 = FACE_BOUND('',#13129,.T.);+#13129 = EDGE_LOOP('',(#13130,#13160,#13181,#13182));+#13130 = ORIENTED_EDGE('',*,*,#13131,.F.);+#13131 = EDGE_CURVE('',#13132,#13134,#13136,.T.);+#13132 = VERTEX_POINT('',#13133);+#13133 = CARTESIAN_POINT('',(2.4875,2.775,0.));+#13134 = VERTEX_POINT('',#13135);+#13135 = CARTESIAN_POINT('',(2.4875,3.075,0.));+#13136 = SURFACE_CURVE('',#13137,(#13141,#13148),.PCURVE_S1.);+#13137 = LINE('',#13138,#13139);+#13138 = CARTESIAN_POINT('',(2.4875,2.775,0.));+#13139 = VECTOR('',#13140,1.);+#13140 = DIRECTION('',(0.,1.,0.));+#13141 = PCURVE('',#13116,#13142);+#13142 = DEFINITIONAL_REPRESENTATION('',(#13143),#13147);+#13143 = LINE('',#13144,#13145);+#13144 = CARTESIAN_POINT('',(0.,-0.15));+#13145 = VECTOR('',#13146,1.);+#13146 = DIRECTION('',(0.,1.));+#13147 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13148 = PCURVE('',#13149,#13154);+#13149 = PLANE('',#13150);+#13150 = AXIS2_PLACEMENT_3D('',#13151,#13152,#13153);+#13151 = CARTESIAN_POINT('',(3.205,2.925,0.));+#13152 = DIRECTION('',(-0.,-0.,-1.));+#13153 = DIRECTION('',(-1.,0.,0.));+#13154 = DEFINITIONAL_REPRESENTATION('',(#13155),#13159);+#13155 = LINE('',#13156,#13157);+#13156 = CARTESIAN_POINT('',(0.7175,-0.15));+#13157 = VECTOR('',#13158,1.);+#13158 = DIRECTION('',(0.,1.));+#13159 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13160 = ORIENTED_EDGE('',*,*,#13161,.T.);+#13161 = EDGE_CURVE('',#13132,#13056,#13162,.T.);+#13162 = SURFACE_CURVE('',#13163,(#13167,#13174),.PCURVE_S1.);+#13163 = LINE('',#13164,#13165);+#13164 = CARTESIAN_POINT('',(2.4875,2.775,0.));+#13165 = VECTOR('',#13166,1.);+#13166 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#13167 = PCURVE('',#13116,#13168);+#13168 = DEFINITIONAL_REPRESENTATION('',(#13169),#13173);+#13169 = LINE('',#13170,#13171);+#13170 = CARTESIAN_POINT('',(0.,-0.15));+#13171 = VECTOR('',#13172,1.);+#13172 = DIRECTION('',(1.,0.));+#13173 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13174 = PCURVE('',#12882,#13175);+#13175 = DEFINITIONAL_REPRESENTATION('',(#13176),#13180);+#13176 = LINE('',#13177,#13178);+#13177 = CARTESIAN_POINT('',(-0.217942023204,-0.146682274245));+#13178 = VECTOR('',#13179,1.);+#13179 = DIRECTION('',(0.839949759337,-0.542664170358));+#13180 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13181 = ORIENTED_EDGE('',*,*,#13102,.F.);+#13182 = ORIENTED_EDGE('',*,*,#13183,.F.);+#13183 = EDGE_CURVE('',#13134,#13080,#13184,.T.);+#13184 = SURFACE_CURVE('',#13185,(#13189,#13196),.PCURVE_S1.);+#13185 = LINE('',#13186,#13187);+#13186 = CARTESIAN_POINT('',(2.4875,3.075,0.));+#13187 = VECTOR('',#13188,1.);+#13188 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#13189 = PCURVE('',#13116,#13190);+#13190 = DEFINITIONAL_REPRESENTATION('',(#13191),#13195);+#13191 = LINE('',#13192,#13193);+#13192 = CARTESIAN_POINT('',(0.,0.15));+#13193 = VECTOR('',#13194,1.);+#13194 = DIRECTION('',(1.,0.));+#13195 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13196 = PCURVE('',#12938,#13197);+#13197 = DEFINITIONAL_REPRESENTATION('',(#13198),#13202);+#13198 = LINE('',#13199,#13200);+#13199 = CARTESIAN_POINT('',(-0.217942023204,-0.146682274245));+#13200 = VECTOR('',#13201,1.);+#13201 = DIRECTION('',(0.839949759337,-0.542664170358));+#13202 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13203 = ADVANCED_FACE('',(#13204),#13149,.T.);+#13204 = FACE_BOUND('',#13205,.T.);+#13205 = EDGE_LOOP('',(#13206,#13236,#13257,#13258));+#13206 = ORIENTED_EDGE('',*,*,#13207,.F.);+#13207 = EDGE_CURVE('',#13208,#13210,#13212,.T.);+#13208 = VERTEX_POINT('',#13209);+#13209 = CARTESIAN_POINT('',(3.205,2.775,0.));+#13210 = VERTEX_POINT('',#13211);+#13211 = CARTESIAN_POINT('',(3.205,3.075,0.));+#13212 = SURFACE_CURVE('',#13213,(#13217,#13224),.PCURVE_S1.);+#13213 = LINE('',#13214,#13215);+#13214 = CARTESIAN_POINT('',(3.205,2.775,0.));+#13215 = VECTOR('',#13216,1.);+#13216 = DIRECTION('',(0.,1.,0.));+#13217 = PCURVE('',#13149,#13218);+#13218 = DEFINITIONAL_REPRESENTATION('',(#13219),#13223);+#13219 = LINE('',#13220,#13221);+#13220 = CARTESIAN_POINT('',(0.,-0.15));+#13221 = VECTOR('',#13222,1.);+#13222 = DIRECTION('',(0.,1.));+#13223 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13224 = PCURVE('',#13225,#13230);+#13225 = PLANE('',#13226);+#13226 = AXIS2_PLACEMENT_3D('',#13227,#13228,#13229);+#13227 = CARTESIAN_POINT('',(3.205,2.925,0.15));+#13228 = DIRECTION('',(1.,0.,0.));+#13229 = DIRECTION('',(0.,0.,-1.));+#13230 = DEFINITIONAL_REPRESENTATION('',(#13231),#13235);+#13231 = LINE('',#13232,#13233);+#13232 = CARTESIAN_POINT('',(0.15,-0.15));+#13233 = VECTOR('',#13234,1.);+#13234 = DIRECTION('',(0.,1.));+#13235 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13236 = ORIENTED_EDGE('',*,*,#13237,.T.);+#13237 = EDGE_CURVE('',#13208,#13132,#13238,.T.);+#13238 = SURFACE_CURVE('',#13239,(#13243,#13250),.PCURVE_S1.);+#13239 = LINE('',#13240,#13241);+#13240 = CARTESIAN_POINT('',(3.205,2.775,0.));+#13241 = VECTOR('',#13242,1.);+#13242 = DIRECTION('',(-1.,0.,0.));+#13243 = PCURVE('',#13149,#13244);+#13244 = DEFINITIONAL_REPRESENTATION('',(#13245),#13249);+#13245 = LINE('',#13246,#13247);+#13246 = CARTESIAN_POINT('',(0.,-0.15));+#13247 = VECTOR('',#13248,1.);+#13248 = DIRECTION('',(1.,0.));+#13249 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13250 = PCURVE('',#12882,#13251);+#13251 = DEFINITIONAL_REPRESENTATION('',(#13252),#13256);+#13252 = LINE('',#13253,#13254);+#13253 = CARTESIAN_POINT('',(-0.217942023204,0.570817725755));+#13254 = VECTOR('',#13255,1.);+#13255 = DIRECTION('',(0.,-1.));+#13256 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13257 = ORIENTED_EDGE('',*,*,#13131,.T.);+#13258 = ORIENTED_EDGE('',*,*,#13259,.F.);+#13259 = EDGE_CURVE('',#13210,#13134,#13260,.T.);+#13260 = SURFACE_CURVE('',#13261,(#13265,#13272),.PCURVE_S1.);+#13261 = LINE('',#13262,#13263);+#13262 = CARTESIAN_POINT('',(3.205,3.075,0.));+#13263 = VECTOR('',#13264,1.);+#13264 = DIRECTION('',(-1.,0.,0.));+#13265 = PCURVE('',#13149,#13266);+#13266 = DEFINITIONAL_REPRESENTATION('',(#13267),#13271);+#13267 = LINE('',#13268,#13269);+#13268 = CARTESIAN_POINT('',(0.,0.15));+#13269 = VECTOR('',#13270,1.);+#13270 = DIRECTION('',(1.,0.));+#13271 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13272 = PCURVE('',#12938,#13273);+#13273 = DEFINITIONAL_REPRESENTATION('',(#13274),#13278);+#13274 = LINE('',#13275,#13276);+#13275 = CARTESIAN_POINT('',(-0.217942023204,0.570817725755));+#13276 = VECTOR('',#13277,1.);+#13277 = DIRECTION('',(0.,-1.));+#13278 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13279 = ADVANCED_FACE('',(#13280),#13225,.T.);+#13280 = FACE_BOUND('',#13281,.T.);+#13281 = EDGE_LOOP('',(#13282,#13312,#13333,#13334));+#13282 = ORIENTED_EDGE('',*,*,#13283,.F.);+#13283 = EDGE_CURVE('',#13284,#13286,#13288,.T.);+#13284 = VERTEX_POINT('',#13285);+#13285 = CARTESIAN_POINT('',(3.205,2.775,0.15));+#13286 = VERTEX_POINT('',#13287);+#13287 = CARTESIAN_POINT('',(3.205,3.075,0.15));+#13288 = SURFACE_CURVE('',#13289,(#13293,#13300),.PCURVE_S1.);+#13289 = LINE('',#13290,#13291);+#13290 = CARTESIAN_POINT('',(3.205,2.775,0.15));+#13291 = VECTOR('',#13292,1.);+#13292 = DIRECTION('',(0.,1.,0.));+#13293 = PCURVE('',#13225,#13294);+#13294 = DEFINITIONAL_REPRESENTATION('',(#13295),#13299);+#13295 = LINE('',#13296,#13297);+#13296 = CARTESIAN_POINT('',(0.,-0.15));+#13297 = VECTOR('',#13298,1.);+#13298 = DIRECTION('',(0.,1.));+#13299 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13300 = PCURVE('',#13301,#13306);+#13301 = PLANE('',#13302);+#13302 = AXIS2_PLACEMENT_3D('',#13303,#13304,#13305);+#13303 = CARTESIAN_POINT('',(2.6375,2.925,0.15));+#13304 = DIRECTION('',(0.,0.,1.));+#13305 = DIRECTION('',(1.,0.,0.));+#13306 = DEFINITIONAL_REPRESENTATION('',(#13307),#13311);+#13307 = LINE('',#13308,#13309);+#13308 = CARTESIAN_POINT('',(0.5675,-0.15));+#13309 = VECTOR('',#13310,1.);+#13310 = DIRECTION('',(0.,1.));+#13311 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13312 = ORIENTED_EDGE('',*,*,#13313,.T.);+#13313 = EDGE_CURVE('',#13284,#13208,#13314,.T.);+#13314 = SURFACE_CURVE('',#13315,(#13319,#13326),.PCURVE_S1.);+#13315 = LINE('',#13316,#13317);+#13316 = CARTESIAN_POINT('',(3.205,2.775,0.15));+#13317 = VECTOR('',#13318,1.);+#13318 = DIRECTION('',(0.,0.,-1.));+#13319 = PCURVE('',#13225,#13320);+#13320 = DEFINITIONAL_REPRESENTATION('',(#13321),#13325);+#13321 = LINE('',#13322,#13323);+#13322 = CARTESIAN_POINT('',(0.,-0.15));+#13323 = VECTOR('',#13324,1.);+#13324 = DIRECTION('',(1.,0.));+#13325 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13326 = PCURVE('',#12882,#13327);+#13327 = DEFINITIONAL_REPRESENTATION('',(#13328),#13332);+#13328 = LINE('',#13329,#13330);+#13329 = CARTESIAN_POINT('',(-6.7942023204E-02,0.570817725755));+#13330 = VECTOR('',#13331,1.);+#13331 = DIRECTION('',(-1.,0.));+#13332 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13333 = ORIENTED_EDGE('',*,*,#13207,.T.);+#13334 = ORIENTED_EDGE('',*,*,#13335,.F.);+#13335 = EDGE_CURVE('',#13286,#13210,#13336,.T.);+#13336 = SURFACE_CURVE('',#13337,(#13341,#13348),.PCURVE_S1.);+#13337 = LINE('',#13338,#13339);+#13338 = CARTESIAN_POINT('',(3.205,3.075,0.15));+#13339 = VECTOR('',#13340,1.);+#13340 = DIRECTION('',(0.,0.,-1.));+#13341 = PCURVE('',#13225,#13342);+#13342 = DEFINITIONAL_REPRESENTATION('',(#13343),#13347);+#13343 = LINE('',#13344,#13345);+#13344 = CARTESIAN_POINT('',(0.,0.15));+#13345 = VECTOR('',#13346,1.);+#13346 = DIRECTION('',(1.,0.));+#13347 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13348 = PCURVE('',#12938,#13349);+#13349 = DEFINITIONAL_REPRESENTATION('',(#13350),#13354);+#13350 = LINE('',#13351,#13352);+#13351 = CARTESIAN_POINT('',(-6.7942023204E-02,0.570817725755));+#13352 = VECTOR('',#13353,1.);+#13353 = DIRECTION('',(-1.,0.));+#13354 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13355 = ADVANCED_FACE('',(#13356),#13301,.T.);+#13356 = FACE_BOUND('',#13357,.T.);+#13357 = EDGE_LOOP('',(#13358,#13383,#13404,#13405));+#13358 = ORIENTED_EDGE('',*,*,#13359,.F.);+#13359 = EDGE_CURVE('',#13360,#13362,#13364,.T.);+#13360 = VERTEX_POINT('',#13361);+#13361 = CARTESIAN_POINT('',(2.6375,2.775,0.15));+#13362 = VERTEX_POINT('',#13363);+#13363 = CARTESIAN_POINT('',(2.6375,3.075,0.15));+#13364 = SURFACE_CURVE('',#13365,(#13369,#13376),.PCURVE_S1.);+#13365 = LINE('',#13366,#13367);+#13366 = CARTESIAN_POINT('',(2.6375,2.775,0.15));+#13367 = VECTOR('',#13368,1.);+#13368 = DIRECTION('',(0.,1.,0.));+#13369 = PCURVE('',#13301,#13370);+#13370 = DEFINITIONAL_REPRESENTATION('',(#13371),#13375);+#13371 = LINE('',#13372,#13373);+#13372 = CARTESIAN_POINT('',(0.,-0.15));+#13373 = VECTOR('',#13374,1.);+#13374 = DIRECTION('',(0.,1.));+#13375 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13376 = PCURVE('',#12910,#13377);+#13377 = DEFINITIONAL_REPRESENTATION('',(#13378),#13382);+#13378 = LINE('',#13379,#13380);+#13379 = CARTESIAN_POINT('',(0.529793591883,-0.15));+#13380 = VECTOR('',#13381,1.);+#13381 = DIRECTION('',(0.,1.));+#13382 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13383 = ORIENTED_EDGE('',*,*,#13384,.T.);+#13384 = EDGE_CURVE('',#13360,#13284,#13385,.T.);+#13385 = SURFACE_CURVE('',#13386,(#13390,#13397),.PCURVE_S1.);+#13386 = LINE('',#13387,#13388);+#13387 = CARTESIAN_POINT('',(2.6375,2.775,0.15));+#13388 = VECTOR('',#13389,1.);+#13389 = DIRECTION('',(1.,0.,0.));+#13390 = PCURVE('',#13301,#13391);+#13391 = DEFINITIONAL_REPRESENTATION('',(#13392),#13396);+#13392 = LINE('',#13393,#13394);+#13393 = CARTESIAN_POINT('',(0.,-0.15));+#13394 = VECTOR('',#13395,1.);+#13395 = DIRECTION('',(1.,0.));+#13396 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13397 = PCURVE('',#12882,#13398);+#13398 = DEFINITIONAL_REPRESENTATION('',(#13399),#13403);+#13399 = LINE('',#13400,#13401);+#13400 = CARTESIAN_POINT('',(-6.7942023204E-02,3.317725755E-03));+#13401 = VECTOR('',#13402,1.);+#13402 = DIRECTION('',(0.,1.));+#13403 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13404 = ORIENTED_EDGE('',*,*,#13283,.T.);+#13405 = ORIENTED_EDGE('',*,*,#13406,.F.);+#13406 = EDGE_CURVE('',#13362,#13286,#13407,.T.);+#13407 = SURFACE_CURVE('',#13408,(#13412,#13419),.PCURVE_S1.);+#13408 = LINE('',#13409,#13410);+#13409 = CARTESIAN_POINT('',(2.6375,3.075,0.15));+#13410 = VECTOR('',#13411,1.);+#13411 = DIRECTION('',(1.,0.,0.));+#13412 = PCURVE('',#13301,#13413);+#13413 = DEFINITIONAL_REPRESENTATION('',(#13414),#13418);+#13414 = LINE('',#13415,#13416);+#13415 = CARTESIAN_POINT('',(0.,0.15));+#13416 = VECTOR('',#13417,1.);+#13417 = DIRECTION('',(1.,0.));+#13418 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13419 = PCURVE('',#12938,#13420);+#13420 = DEFINITIONAL_REPRESENTATION('',(#13421),#13425);+#13421 = LINE('',#13422,#13423);+#13422 = CARTESIAN_POINT('',(-6.7942023204E-02,3.317725755E-03));+#13423 = VECTOR('',#13424,1.);+#13424 = DIRECTION('',(0.,1.));+#13425 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13426 = ADVANCED_FACE('',(#13427),#12938,.T.);+#13427 = FACE_BOUND('',#13428,.T.);+#13428 = EDGE_LOOP('',(#13429,#13430,#13451,#13452,#13453,#13454,#13455,+ #13456));+#13429 = ORIENTED_EDGE('',*,*,#12922,.T.);+#13430 = ORIENTED_EDGE('',*,*,#13431,.T.);+#13431 = EDGE_CURVE('',#12895,#13362,#13432,.T.);+#13432 = SURFACE_CURVE('',#13433,(#13437,#13444),.PCURVE_S1.);+#13433 = LINE('',#13434,#13435);+#13434 = CARTESIAN_POINT('',(2.35,3.075,0.595));+#13435 = VECTOR('',#13436,1.);+#13436 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#13437 = PCURVE('',#12938,#13438);+#13438 = DEFINITIONAL_REPRESENTATION('',(#13439),#13443);+#13439 = LINE('',#13440,#13441);+#13440 = CARTESIAN_POINT('',(0.377057976796,-0.284182274245));+#13441 = VECTOR('',#13442,1.);+#13442 = DIRECTION('',(-0.839949759337,0.542664170358));+#13443 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13444 = PCURVE('',#12910,#13445);+#13445 = DEFINITIONAL_REPRESENTATION('',(#13446),#13450);+#13446 = LINE('',#13447,#13448);+#13447 = CARTESIAN_POINT('',(0.,0.15));+#13448 = VECTOR('',#13449,1.);+#13449 = DIRECTION('',(1.,0.));+#13450 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13451 = ORIENTED_EDGE('',*,*,#13406,.T.);+#13452 = ORIENTED_EDGE('',*,*,#13335,.T.);+#13453 = ORIENTED_EDGE('',*,*,#13259,.T.);+#13454 = ORIENTED_EDGE('',*,*,#13183,.T.);+#13455 = ORIENTED_EDGE('',*,*,#13079,.T.);+#13456 = ORIENTED_EDGE('',*,*,#13003,.T.);+#13457 = ADVANCED_FACE('',(#13458),#12910,.T.);+#13458 = FACE_BOUND('',#13459,.T.);+#13459 = EDGE_LOOP('',(#13460,#13461,#13482,#13483));+#13460 = ORIENTED_EDGE('',*,*,#12894,.F.);+#13461 = ORIENTED_EDGE('',*,*,#13462,.T.);+#13462 = EDGE_CURVE('',#12862,#13360,#13463,.T.);+#13463 = SURFACE_CURVE('',#13464,(#13468,#13475),.PCURVE_S1.);+#13464 = LINE('',#13465,#13466);+#13465 = CARTESIAN_POINT('',(2.35,2.775,0.595));+#13466 = VECTOR('',#13467,1.);+#13467 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#13468 = PCURVE('',#12910,#13469);+#13469 = DEFINITIONAL_REPRESENTATION('',(#13470),#13474);+#13470 = LINE('',#13471,#13472);+#13471 = CARTESIAN_POINT('',(0.,-0.15));+#13472 = VECTOR('',#13473,1.);+#13473 = DIRECTION('',(1.,0.));+#13474 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13475 = PCURVE('',#12882,#13476);+#13476 = DEFINITIONAL_REPRESENTATION('',(#13477),#13481);+#13477 = LINE('',#13478,#13479);+#13478 = CARTESIAN_POINT('',(0.377057976796,-0.284182274245));+#13479 = VECTOR('',#13480,1.);+#13480 = DIRECTION('',(-0.839949759337,0.542664170358));+#13481 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13482 = ORIENTED_EDGE('',*,*,#13359,.T.);+#13483 = ORIENTED_EDGE('',*,*,#13431,.F.);+#13484 = ADVANCED_FACE('',(#13485),#12882,.F.);+#13485 = FACE_BOUND('',#13486,.F.);+#13486 = EDGE_LOOP('',(#13487,#13488,#13489,#13490,#13491,#13492,#13493,+ #13494));+#13487 = ORIENTED_EDGE('',*,*,#12859,.T.);+#13488 = ORIENTED_EDGE('',*,*,#13462,.T.);+#13489 = ORIENTED_EDGE('',*,*,#13384,.T.);+#13490 = ORIENTED_EDGE('',*,*,#13313,.T.);+#13491 = ORIENTED_EDGE('',*,*,#13237,.T.);+#13492 = ORIENTED_EDGE('',*,*,#13161,.T.);+#13493 = ORIENTED_EDGE('',*,*,#13055,.T.);+#13494 = ORIENTED_EDGE('',*,*,#12979,.T.);+#13495 = MANIFOLD_SOLID_BREP('',#13496);+#13496 = CLOSED_SHELL('',(#13497,#13617,#13717,#13764,#13811,#13818));+#13497 = ADVANCED_FACE('',(#13498),#13512,.F.);+#13498 = FACE_BOUND('',#13499,.F.);+#13499 = EDGE_LOOP('',(#13500,#13535,#13563,#13591));+#13500 = ORIENTED_EDGE('',*,*,#13501,.F.);+#13501 = EDGE_CURVE('',#13502,#13504,#13506,.T.);+#13502 = VERTEX_POINT('',#13503);+#13503 = CARTESIAN_POINT('',(-1.02125,-1.59125,0.));+#13504 = VERTEX_POINT('',#13505);+#13505 = CARTESIAN_POINT('',(-1.02125,-1.59125,0.13));+#13506 = SURFACE_CURVE('',#13507,(#13511,#13523),.PCURVE_S1.);+#13507 = LINE('',#13508,#13509);+#13508 = CARTESIAN_POINT('',(-1.02125,-1.59125,0.));+#13509 = VECTOR('',#13510,1.);+#13510 = DIRECTION('',(0.,0.,1.));+#13511 = PCURVE('',#13512,#13517);+#13512 = PLANE('',#13513);+#13513 = AXIS2_PLACEMENT_3D('',#13514,#13515,#13516);+#13514 = CARTESIAN_POINT('',(-1.02125,-1.59125,0.));+#13515 = DIRECTION('',(1.,0.,0.));+#13516 = DIRECTION('',(0.,0.,1.));+#13517 = DEFINITIONAL_REPRESENTATION('',(#13518),#13522);+#13518 = LINE('',#13519,#13520);+#13519 = CARTESIAN_POINT('',(0.,0.));+#13520 = VECTOR('',#13521,1.);+#13521 = DIRECTION('',(1.,0.));+#13522 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13523 = PCURVE('',#13524,#13529);+#13524 = PLANE('',#13525);+#13525 = AXIS2_PLACEMENT_3D('',#13526,#13527,#13528);+#13526 = CARTESIAN_POINT('',(-1.02125,-1.59125,0.));+#13527 = DIRECTION('',(0.,1.,0.));+#13528 = DIRECTION('',(0.,0.,1.));+#13529 = DEFINITIONAL_REPRESENTATION('',(#13530),#13534);+#13530 = LINE('',#13531,#13532);+#13531 = CARTESIAN_POINT('',(0.,0.));+#13532 = VECTOR('',#13533,1.);+#13533 = DIRECTION('',(1.,0.));+#13534 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13535 = ORIENTED_EDGE('',*,*,#13536,.T.);+#13536 = EDGE_CURVE('',#13502,#13537,#13539,.T.);+#13537 = VERTEX_POINT('',#13538);+#13538 = CARTESIAN_POINT('',(-1.02125,1.59125,0.));+#13539 = SURFACE_CURVE('',#13540,(#13544,#13551),.PCURVE_S1.);+#13540 = LINE('',#13541,#13542);+#13541 = CARTESIAN_POINT('',(-1.02125,-1.59125,0.));+#13542 = VECTOR('',#13543,1.);+#13543 = DIRECTION('',(0.,1.,0.));+#13544 = PCURVE('',#13512,#13545);+#13545 = DEFINITIONAL_REPRESENTATION('',(#13546),#13550);+#13546 = LINE('',#13547,#13548);+#13547 = CARTESIAN_POINT('',(0.,0.));+#13548 = VECTOR('',#13549,1.);+#13549 = DIRECTION('',(0.,-1.));+#13550 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13551 = PCURVE('',#13552,#13557);+#13552 = PLANE('',#13553);+#13553 = AXIS2_PLACEMENT_3D('',#13554,#13555,#13556);+#13554 = CARTESIAN_POINT('',(-1.02125,-1.59125,0.));+#13555 = DIRECTION('',(0.,0.,1.));+#13556 = DIRECTION('',(1.,0.,0.));+#13557 = DEFINITIONAL_REPRESENTATION('',(#13558),#13562);+#13558 = LINE('',#13559,#13560);+#13559 = CARTESIAN_POINT('',(0.,0.));+#13560 = VECTOR('',#13561,1.);+#13561 = DIRECTION('',(0.,1.));+#13562 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13563 = ORIENTED_EDGE('',*,*,#13564,.T.);+#13564 = EDGE_CURVE('',#13537,#13565,#13567,.T.);+#13565 = VERTEX_POINT('',#13566);+#13566 = CARTESIAN_POINT('',(-1.02125,1.59125,0.13));+#13567 = SURFACE_CURVE('',#13568,(#13572,#13579),.PCURVE_S1.);+#13568 = LINE('',#13569,#13570);+#13569 = CARTESIAN_POINT('',(-1.02125,1.59125,0.));+#13570 = VECTOR('',#13571,1.);+#13571 = DIRECTION('',(0.,0.,1.));+#13572 = PCURVE('',#13512,#13573);+#13573 = DEFINITIONAL_REPRESENTATION('',(#13574),#13578);+#13574 = LINE('',#13575,#13576);+#13575 = CARTESIAN_POINT('',(0.,-3.1825));+#13576 = VECTOR('',#13577,1.);+#13577 = DIRECTION('',(1.,0.));+#13578 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13579 = PCURVE('',#13580,#13585);+#13580 = PLANE('',#13581);+#13581 = AXIS2_PLACEMENT_3D('',#13582,#13583,#13584);+#13582 = CARTESIAN_POINT('',(-1.02125,1.59125,0.));+#13583 = DIRECTION('',(0.,1.,0.));+#13584 = DIRECTION('',(0.,0.,1.));+#13585 = DEFINITIONAL_REPRESENTATION('',(#13586),#13590);+#13586 = LINE('',#13587,#13588);+#13587 = CARTESIAN_POINT('',(0.,0.));+#13588 = VECTOR('',#13589,1.);+#13589 = DIRECTION('',(1.,0.));+#13590 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13591 = ORIENTED_EDGE('',*,*,#13592,.F.);+#13592 = EDGE_CURVE('',#13504,#13565,#13593,.T.);+#13593 = SURFACE_CURVE('',#13594,(#13598,#13605),.PCURVE_S1.);+#13594 = LINE('',#13595,#13596);+#13595 = CARTESIAN_POINT('',(-1.02125,-1.59125,0.13));+#13596 = VECTOR('',#13597,1.);+#13597 = DIRECTION('',(0.,1.,0.));+#13598 = PCURVE('',#13512,#13599);+#13599 = DEFINITIONAL_REPRESENTATION('',(#13600),#13604);+#13600 = LINE('',#13601,#13602);+#13601 = CARTESIAN_POINT('',(0.13,0.));+#13602 = VECTOR('',#13603,1.);+#13603 = DIRECTION('',(0.,-1.));+#13604 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13605 = PCURVE('',#13606,#13611);+#13606 = PLANE('',#13607);+#13607 = AXIS2_PLACEMENT_3D('',#13608,#13609,#13610);+#13608 = CARTESIAN_POINT('',(-1.02125,-1.59125,0.13));+#13609 = DIRECTION('',(0.,0.,1.));+#13610 = DIRECTION('',(1.,0.,0.));+#13611 = DEFINITIONAL_REPRESENTATION('',(#13612),#13616);+#13612 = LINE('',#13613,#13614);+#13613 = CARTESIAN_POINT('',(0.,0.));+#13614 = VECTOR('',#13615,1.);+#13615 = DIRECTION('',(0.,1.));+#13616 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13617 = ADVANCED_FACE('',(#13618),#13632,.T.);+#13618 = FACE_BOUND('',#13619,.T.);+#13619 = EDGE_LOOP('',(#13620,#13650,#13673,#13696));+#13620 = ORIENTED_EDGE('',*,*,#13621,.F.);+#13621 = EDGE_CURVE('',#13622,#13624,#13626,.T.);+#13622 = VERTEX_POINT('',#13623);+#13623 = CARTESIAN_POINT('',(1.02125,-1.59125,0.));+#13624 = VERTEX_POINT('',#13625);+#13625 = CARTESIAN_POINT('',(1.02125,-1.59125,0.13));+#13626 = SURFACE_CURVE('',#13627,(#13631,#13643),.PCURVE_S1.);+#13627 = LINE('',#13628,#13629);+#13628 = CARTESIAN_POINT('',(1.02125,-1.59125,0.));+#13629 = VECTOR('',#13630,1.);+#13630 = DIRECTION('',(0.,0.,1.));+#13631 = PCURVE('',#13632,#13637);+#13632 = PLANE('',#13633);+#13633 = AXIS2_PLACEMENT_3D('',#13634,#13635,#13636);+#13634 = CARTESIAN_POINT('',(1.02125,-1.59125,0.));+#13635 = DIRECTION('',(1.,0.,0.));+#13636 = DIRECTION('',(0.,0.,1.));+#13637 = DEFINITIONAL_REPRESENTATION('',(#13638),#13642);+#13638 = LINE('',#13639,#13640);+#13639 = CARTESIAN_POINT('',(0.,0.));+#13640 = VECTOR('',#13641,1.);+#13641 = DIRECTION('',(1.,0.));+#13642 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13643 = PCURVE('',#13524,#13644);+#13644 = DEFINITIONAL_REPRESENTATION('',(#13645),#13649);+#13645 = LINE('',#13646,#13647);+#13646 = CARTESIAN_POINT('',(0.,2.0425));+#13647 = VECTOR('',#13648,1.);+#13648 = DIRECTION('',(1.,0.));+#13649 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13650 = ORIENTED_EDGE('',*,*,#13651,.T.);+#13651 = EDGE_CURVE('',#13622,#13652,#13654,.T.);+#13652 = VERTEX_POINT('',#13653);+#13653 = CARTESIAN_POINT('',(1.02125,1.59125,0.));+#13654 = SURFACE_CURVE('',#13655,(#13659,#13666),.PCURVE_S1.);+#13655 = LINE('',#13656,#13657);+#13656 = CARTESIAN_POINT('',(1.02125,-1.59125,0.));+#13657 = VECTOR('',#13658,1.);+#13658 = DIRECTION('',(0.,1.,0.));+#13659 = PCURVE('',#13632,#13660);+#13660 = DEFINITIONAL_REPRESENTATION('',(#13661),#13665);+#13661 = LINE('',#13662,#13663);+#13662 = CARTESIAN_POINT('',(0.,0.));+#13663 = VECTOR('',#13664,1.);+#13664 = DIRECTION('',(0.,-1.));+#13665 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13666 = PCURVE('',#13552,#13667);+#13667 = DEFINITIONAL_REPRESENTATION('',(#13668),#13672);+#13668 = LINE('',#13669,#13670);+#13669 = CARTESIAN_POINT('',(2.0425,0.));+#13670 = VECTOR('',#13671,1.);+#13671 = DIRECTION('',(0.,1.));+#13672 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13673 = ORIENTED_EDGE('',*,*,#13674,.T.);+#13674 = EDGE_CURVE('',#13652,#13675,#13677,.T.);+#13675 = VERTEX_POINT('',#13676);+#13676 = CARTESIAN_POINT('',(1.02125,1.59125,0.13));+#13677 = SURFACE_CURVE('',#13678,(#13682,#13689),.PCURVE_S1.);+#13678 = LINE('',#13679,#13680);+#13679 = CARTESIAN_POINT('',(1.02125,1.59125,0.));+#13680 = VECTOR('',#13681,1.);+#13681 = DIRECTION('',(0.,0.,1.));+#13682 = PCURVE('',#13632,#13683);+#13683 = DEFINITIONAL_REPRESENTATION('',(#13684),#13688);+#13684 = LINE('',#13685,#13686);+#13685 = CARTESIAN_POINT('',(0.,-3.1825));+#13686 = VECTOR('',#13687,1.);+#13687 = DIRECTION('',(1.,0.));+#13688 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13689 = PCURVE('',#13580,#13690);+#13690 = DEFINITIONAL_REPRESENTATION('',(#13691),#13695);+#13691 = LINE('',#13692,#13693);+#13692 = CARTESIAN_POINT('',(0.,2.0425));+#13693 = VECTOR('',#13694,1.);+#13694 = DIRECTION('',(1.,0.));+#13695 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13696 = ORIENTED_EDGE('',*,*,#13697,.F.);+#13697 = EDGE_CURVE('',#13624,#13675,#13698,.T.);+#13698 = SURFACE_CURVE('',#13699,(#13703,#13710),.PCURVE_S1.);+#13699 = LINE('',#13700,#13701);+#13700 = CARTESIAN_POINT('',(1.02125,-1.59125,0.13));+#13701 = VECTOR('',#13702,1.);+#13702 = DIRECTION('',(0.,1.,0.));+#13703 = PCURVE('',#13632,#13704);+#13704 = DEFINITIONAL_REPRESENTATION('',(#13705),#13709);+#13705 = LINE('',#13706,#13707);+#13706 = CARTESIAN_POINT('',(0.13,0.));+#13707 = VECTOR('',#13708,1.);+#13708 = DIRECTION('',(0.,-1.));+#13709 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13710 = PCURVE('',#13606,#13711);+#13711 = DEFINITIONAL_REPRESENTATION('',(#13712),#13716);+#13712 = LINE('',#13713,#13714);+#13713 = CARTESIAN_POINT('',(2.0425,0.));+#13714 = VECTOR('',#13715,1.);+#13715 = DIRECTION('',(0.,1.));+#13716 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13717 = ADVANCED_FACE('',(#13718),#13524,.F.);+#13718 = FACE_BOUND('',#13719,.F.);+#13719 = EDGE_LOOP('',(#13720,#13741,#13742,#13763));+#13720 = ORIENTED_EDGE('',*,*,#13721,.F.);+#13721 = EDGE_CURVE('',#13502,#13622,#13722,.T.);+#13722 = SURFACE_CURVE('',#13723,(#13727,#13734),.PCURVE_S1.);+#13723 = LINE('',#13724,#13725);+#13724 = CARTESIAN_POINT('',(-1.02125,-1.59125,0.));+#13725 = VECTOR('',#13726,1.);+#13726 = DIRECTION('',(1.,0.,0.));+#13727 = PCURVE('',#13524,#13728);+#13728 = DEFINITIONAL_REPRESENTATION('',(#13729),#13733);+#13729 = LINE('',#13730,#13731);+#13730 = CARTESIAN_POINT('',(0.,0.));+#13731 = VECTOR('',#13732,1.);+#13732 = DIRECTION('',(0.,1.));+#13733 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13734 = PCURVE('',#13552,#13735);+#13735 = DEFINITIONAL_REPRESENTATION('',(#13736),#13740);+#13736 = LINE('',#13737,#13738);+#13737 = CARTESIAN_POINT('',(0.,0.));+#13738 = VECTOR('',#13739,1.);+#13739 = DIRECTION('',(1.,0.));+#13740 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13741 = ORIENTED_EDGE('',*,*,#13501,.T.);+#13742 = ORIENTED_EDGE('',*,*,#13743,.T.);+#13743 = EDGE_CURVE('',#13504,#13624,#13744,.T.);+#13744 = SURFACE_CURVE('',#13745,(#13749,#13756),.PCURVE_S1.);+#13745 = LINE('',#13746,#13747);+#13746 = CARTESIAN_POINT('',(-1.02125,-1.59125,0.13));+#13747 = VECTOR('',#13748,1.);+#13748 = DIRECTION('',(1.,0.,0.));+#13749 = PCURVE('',#13524,#13750);+#13750 = DEFINITIONAL_REPRESENTATION('',(#13751),#13755);+#13751 = LINE('',#13752,#13753);+#13752 = CARTESIAN_POINT('',(0.13,0.));+#13753 = VECTOR('',#13754,1.);+#13754 = DIRECTION('',(0.,1.));+#13755 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13756 = PCURVE('',#13606,#13757);+#13757 = DEFINITIONAL_REPRESENTATION('',(#13758),#13762);+#13758 = LINE('',#13759,#13760);+#13759 = CARTESIAN_POINT('',(0.,0.));+#13760 = VECTOR('',#13761,1.);+#13761 = DIRECTION('',(1.,0.));+#13762 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13763 = ORIENTED_EDGE('',*,*,#13621,.F.);+#13764 = ADVANCED_FACE('',(#13765),#13580,.T.);+#13765 = FACE_BOUND('',#13766,.T.);+#13766 = EDGE_LOOP('',(#13767,#13788,#13789,#13810));+#13767 = ORIENTED_EDGE('',*,*,#13768,.F.);+#13768 = EDGE_CURVE('',#13537,#13652,#13769,.T.);+#13769 = SURFACE_CURVE('',#13770,(#13774,#13781),.PCURVE_S1.);+#13770 = LINE('',#13771,#13772);+#13771 = CARTESIAN_POINT('',(-1.02125,1.59125,0.));+#13772 = VECTOR('',#13773,1.);+#13773 = DIRECTION('',(1.,0.,0.));+#13774 = PCURVE('',#13580,#13775);+#13775 = DEFINITIONAL_REPRESENTATION('',(#13776),#13780);+#13776 = LINE('',#13777,#13778);+#13777 = CARTESIAN_POINT('',(0.,0.));+#13778 = VECTOR('',#13779,1.);+#13779 = DIRECTION('',(0.,1.));+#13780 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13781 = PCURVE('',#13552,#13782);+#13782 = DEFINITIONAL_REPRESENTATION('',(#13783),#13787);+#13783 = LINE('',#13784,#13785);+#13784 = CARTESIAN_POINT('',(0.,3.1825));+#13785 = VECTOR('',#13786,1.);+#13786 = DIRECTION('',(1.,0.));+#13787 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13788 = ORIENTED_EDGE('',*,*,#13564,.T.);+#13789 = ORIENTED_EDGE('',*,*,#13790,.T.);+#13790 = EDGE_CURVE('',#13565,#13675,#13791,.T.);+#13791 = SURFACE_CURVE('',#13792,(#13796,#13803),.PCURVE_S1.);+#13792 = LINE('',#13793,#13794);+#13793 = CARTESIAN_POINT('',(-1.02125,1.59125,0.13));+#13794 = VECTOR('',#13795,1.);+#13795 = DIRECTION('',(1.,0.,0.));+#13796 = PCURVE('',#13580,#13797);+#13797 = DEFINITIONAL_REPRESENTATION('',(#13798),#13802);+#13798 = LINE('',#13799,#13800);+#13799 = CARTESIAN_POINT('',(0.13,0.));+#13800 = VECTOR('',#13801,1.);+#13801 = DIRECTION('',(0.,1.));+#13802 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13803 = PCURVE('',#13606,#13804);+#13804 = DEFINITIONAL_REPRESENTATION('',(#13805),#13809);+#13805 = LINE('',#13806,#13807);+#13806 = CARTESIAN_POINT('',(0.,3.1825));+#13807 = VECTOR('',#13808,1.);+#13808 = DIRECTION('',(1.,0.));+#13809 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13810 = ORIENTED_EDGE('',*,*,#13674,.F.);+#13811 = ADVANCED_FACE('',(#13812),#13552,.F.);+#13812 = FACE_BOUND('',#13813,.F.);+#13813 = EDGE_LOOP('',(#13814,#13815,#13816,#13817));+#13814 = ORIENTED_EDGE('',*,*,#13536,.F.);+#13815 = ORIENTED_EDGE('',*,*,#13721,.T.);+#13816 = ORIENTED_EDGE('',*,*,#13651,.T.);+#13817 = ORIENTED_EDGE('',*,*,#13768,.F.);+#13818 = ADVANCED_FACE('',(#13819),#13606,.T.);+#13819 = FACE_BOUND('',#13820,.T.);+#13820 = EDGE_LOOP('',(#13821,#13822,#13823,#13824));+#13821 = ORIENTED_EDGE('',*,*,#13592,.F.);+#13822 = ORIENTED_EDGE('',*,*,#13743,.T.);+#13823 = ORIENTED_EDGE('',*,*,#13697,.T.);+#13824 = ORIENTED_EDGE('',*,*,#13790,.F.);+#13825 = MANIFOLD_SOLID_BREP('',#13826);+#13826 = CLOSED_SHELL('',(#13827,#13915,#13919));+#13827 = ADVANCED_FACE('',(#13828),#13841,.T.);+#13828 = FACE_BOUND('',#13829,.T.);+#13829 = EDGE_LOOP('',(#13830,#13864,#13887,#13914));+#13830 = ORIENTED_EDGE('',*,*,#13831,.T.);+#13831 = EDGE_CURVE('',#13832,#13832,#13834,.T.);+#13832 = VERTEX_POINT('',#13833);+#13833 = CARTESIAN_POINT('',(-1.32,2.678,1.15));+#13834 = SURFACE_CURVE('',#13835,(#13840,#13852),.PCURVE_S1.);+#13835 = CIRCLE('',#13836,0.308);+#13836 = AXIS2_PLACEMENT_3D('',#13837,#13838,#13839);+#13837 = CARTESIAN_POINT('',(-1.628,2.678,1.15));+#13838 = DIRECTION('',(0.,0.,1.));+#13839 = DIRECTION('',(1.,0.,0.));+#13840 = PCURVE('',#13841,#13846);+#13841 = CYLINDRICAL_SURFACE('',#13842,0.308);+#13842 = AXIS2_PLACEMENT_3D('',#13843,#13844,#13845);+#13843 = CARTESIAN_POINT('',(-1.628,2.678,1.15));+#13844 = DIRECTION('',(-0.,-0.,-1.));+#13845 = DIRECTION('',(1.,0.,0.));+#13846 = DEFINITIONAL_REPRESENTATION('',(#13847),#13851);+#13847 = LINE('',#13848,#13849);+#13848 = CARTESIAN_POINT('',(6.28318530718,0.));+#13849 = VECTOR('',#13850,1.);+#13850 = DIRECTION('',(-1.,0.));+#13851 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13852 = PCURVE('',#13853,#13858);+#13853 = PLANE('',#13854);+#13854 = AXIS2_PLACEMENT_3D('',#13855,#13856,#13857);+#13855 = CARTESIAN_POINT('',(-1.628,2.678,1.15));+#13856 = DIRECTION('',(0.,0.,1.));+#13857 = DIRECTION('',(1.,0.,0.));+#13858 = DEFINITIONAL_REPRESENTATION('',(#13859),#13863);+#13859 = CIRCLE('',#13860,0.308);+#13860 = AXIS2_PLACEMENT_2D('',#13861,#13862);+#13861 = CARTESIAN_POINT('',(0.,0.));+#13862 = DIRECTION('',(1.,0.));+#13863 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13864 = ORIENTED_EDGE('',*,*,#13865,.T.);+#13865 = EDGE_CURVE('',#13832,#13866,#13868,.T.);+#13866 = VERTEX_POINT('',#13867);+#13867 = CARTESIAN_POINT('',(-1.32,2.678,1.155));+#13868 = SEAM_CURVE('',#13869,(#13873,#13880),.PCURVE_S1.);+#13869 = LINE('',#13870,#13871);+#13870 = CARTESIAN_POINT('',(-1.32,2.678,1.15));+#13871 = VECTOR('',#13872,1.);+#13872 = DIRECTION('',(0.,0.,1.));+#13873 = PCURVE('',#13841,#13874);+#13874 = DEFINITIONAL_REPRESENTATION('',(#13875),#13879);+#13875 = LINE('',#13876,#13877);+#13876 = CARTESIAN_POINT('',(-4.138911435803E-13,0.));+#13877 = VECTOR('',#13878,1.);+#13878 = DIRECTION('',(-0.,-1.));+#13879 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13880 = PCURVE('',#13841,#13881);+#13881 = DEFINITIONAL_REPRESENTATION('',(#13882),#13886);+#13882 = LINE('',#13883,#13884);+#13883 = CARTESIAN_POINT('',(6.28318530718,0.));+#13884 = VECTOR('',#13885,1.);+#13885 = DIRECTION('',(-0.,-1.));+#13886 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13887 = ORIENTED_EDGE('',*,*,#13888,.F.);+#13888 = EDGE_CURVE('',#13866,#13866,#13889,.T.);+#13889 = SURFACE_CURVE('',#13890,(#13895,#13902),.PCURVE_S1.);+#13890 = CIRCLE('',#13891,0.308);+#13891 = AXIS2_PLACEMENT_3D('',#13892,#13893,#13894);+#13892 = CARTESIAN_POINT('',(-1.628,2.678,1.155));+#13893 = DIRECTION('',(0.,0.,1.));+#13894 = DIRECTION('',(1.,0.,0.));+#13895 = PCURVE('',#13841,#13896);+#13896 = DEFINITIONAL_REPRESENTATION('',(#13897),#13901);+#13897 = LINE('',#13898,#13899);+#13898 = CARTESIAN_POINT('',(6.28318530718,-5.E-03));+#13899 = VECTOR('',#13900,1.);+#13900 = DIRECTION('',(-1.,0.));+#13901 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13902 = PCURVE('',#13903,#13908);+#13903 = PLANE('',#13904);+#13904 = AXIS2_PLACEMENT_3D('',#13905,#13906,#13907);+#13905 = CARTESIAN_POINT('',(-1.628,2.678,1.155));+#13906 = DIRECTION('',(0.,0.,1.));+#13907 = DIRECTION('',(1.,0.,0.));+#13908 = DEFINITIONAL_REPRESENTATION('',(#13909),#13913);+#13909 = CIRCLE('',#13910,0.308);+#13910 = AXIS2_PLACEMENT_2D('',#13911,#13912);+#13911 = CARTESIAN_POINT('',(0.,0.));+#13912 = DIRECTION('',(1.,0.));+#13913 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13914 = ORIENTED_EDGE('',*,*,#13865,.F.);+#13915 = ADVANCED_FACE('',(#13916),#13853,.F.);+#13916 = FACE_BOUND('',#13917,.F.);+#13917 = EDGE_LOOP('',(#13918));+#13918 = ORIENTED_EDGE('',*,*,#13831,.T.);+#13919 = ADVANCED_FACE('',(#13920),#13903,.T.);+#13920 = FACE_BOUND('',#13921,.T.);+#13921 = EDGE_LOOP('',(#13922));+#13922 = ORIENTED_EDGE('',*,*,#13888,.T.);+#13923 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#13927)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#13924,#13925,#13926)) +REPRESENTATION_CONTEXT('Context #1',+ '3D Context with UNIT and UNCERTAINTY') );+#13924 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );+#13925 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );+#13926 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );+#13927 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#13924,+ 'distance_accuracy_value','confusion accuracy');+#13928 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#7));+#13929 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(+ #13930,#13938,#13945,#13952,#13959,#13966,#13973,#13980,#13987,+ #13994,#14001,#14008,#14015,#14023,#14030,#14037,#14044,#14051,+ #14058,#14065,#14072,#14079,#14086,#14093,#14100,#14107,#14114,+ #14121,#14128,#14135,#14142,#14149,#14156,#14163,#14170,#14177,+ #14184,#14191,#14198,#14205,#14212,#14219,#14226,#14233,#14240,+ #14247,#14254,#14261,#14268,#14275,#14282,#14289,#14296,#14303,+ #14310,#14317,#14324,#14331,#14338,#14345,#14352,#14359,#14366,+ #14373,#14380,#14387,#14394,#14401,#14408,#14415,#14422,#14429,+ #14436,#14443,#14450,#14457,#14464,#14471,#14478,#14485,#14492,+ #14499,#14506,#14513,#14520,#14527,#14534,#14541,#14548,#14555,+ #14562,#14569,#14576,#14583,#14590,#14597,#14604,#14611,#14618,+ #14625,#14632,#14639,#14646,#14653,#14660,#14667,#14674,#14681,+ #14688,#14695,#14702,#14709,#14716,#14723,#14730,#14737,#14744,+ #14751,#14758,#14765,#14772,#14779,#14786,#14793,#14800,#14807,+ #14814,#14821,#14828,#14835,#14842,#14849,#14856,#14863,#14870,+ #14877,#14884,#14891,#14898,#14905,#14912,#14919,#14926,#14933,+ #14940,#14947,#14954,#14961,#14968,#14975,#14982,#14989,#14996,+ #15003,#15010,#15017,#15024,#15031,#15038,#15045,#15052,#15059,+ #15066,#15073,#15080,#15087,#15094,#15101,#15108,#15115,#15122,+ #15129,#15136,#15143,#15150,#15157,#15164,#15171,#15178,#15185,+ #15192,#15199,#15206,#15213,#15220,#15227,#15234,#15241,#15248,+ #15255,#15262,#15269,#15276,#15283,#15290,#15297,#15304,#15311,+ #15318,#15325,#15332,#15339,#15346,#15353,#15360,#15367,#15374,+ #15381,#15388,#15395,#15402,#15409,#15416,#15423,#15430,#15437,+ #15444,#15451,#15458,#15466,#15473),#13923);+#13930 = STYLED_ITEM('color',(#13931),#17);+#13931 = PRESENTATION_STYLE_ASSIGNMENT((#13932));+#13932 = SURFACE_STYLE_USAGE(.BOTH.,#13933);+#13933 = SURFACE_SIDE_STYLE('',(#13934));+#13934 = SURFACE_STYLE_FILL_AREA(#13935);+#13935 = FILL_AREA_STYLE('',(#13936));+#13936 = FILL_AREA_STYLE_COLOUR('',#13937);+#13937 = COLOUR_RGB('',0.120000001395,0.120000001395,0.130000001093);+#13938 = STYLED_ITEM('color',(#13939),#137);+#13939 = PRESENTATION_STYLE_ASSIGNMENT((#13940));+#13940 = SURFACE_STYLE_USAGE(.BOTH.,#13941);+#13941 = SURFACE_SIDE_STYLE('',(#13942));+#13942 = SURFACE_STYLE_FILL_AREA(#13943);+#13943 = FILL_AREA_STYLE('',(#13944));+#13944 = FILL_AREA_STYLE_COLOUR('',#13937);+#13945 = STYLED_ITEM('color',(#13946),#218);+#13946 = PRESENTATION_STYLE_ASSIGNMENT((#13947));+#13947 = SURFACE_STYLE_USAGE(.BOTH.,#13948);+#13948 = SURFACE_SIDE_STYLE('',(#13949));+#13949 = SURFACE_STYLE_FILL_AREA(#13950);+#13950 = FILL_AREA_STYLE('',(#13951));+#13951 = FILL_AREA_STYLE_COLOUR('',#13937);+#13952 = STYLED_ITEM('color',(#13953),#299);+#13953 = PRESENTATION_STYLE_ASSIGNMENT((#13954));+#13954 = SURFACE_STYLE_USAGE(.BOTH.,#13955);+#13955 = SURFACE_SIDE_STYLE('',(#13956));+#13956 = SURFACE_STYLE_FILL_AREA(#13957);+#13957 = FILL_AREA_STYLE('',(#13958));+#13958 = FILL_AREA_STYLE_COLOUR('',#13937);+#13959 = STYLED_ITEM('color',(#13960),#348);+#13960 = PRESENTATION_STYLE_ASSIGNMENT((#13961));+#13961 = SURFACE_STYLE_USAGE(.BOTH.,#13962);+#13962 = SURFACE_SIDE_STYLE('',(#13963));+#13963 = SURFACE_STYLE_FILL_AREA(#13964);+#13964 = FILL_AREA_STYLE('',(#13965));+#13965 = FILL_AREA_STYLE_COLOUR('',#13937);+#13966 = STYLED_ITEM('color',(#13967),#397);+#13967 = PRESENTATION_STYLE_ASSIGNMENT((#13968));+#13968 = SURFACE_STYLE_USAGE(.BOTH.,#13969);+#13969 = SURFACE_SIDE_STYLE('',(#13970));+#13970 = SURFACE_STYLE_FILL_AREA(#13971);+#13971 = FILL_AREA_STYLE('',(#13972));+#13972 = FILL_AREA_STYLE_COLOUR('',#13937);+#13973 = STYLED_ITEM('color',(#13974),#429);+#13974 = PRESENTATION_STYLE_ASSIGNMENT((#13975));+#13975 = SURFACE_STYLE_USAGE(.BOTH.,#13976);+#13976 = SURFACE_SIDE_STYLE('',(#13977));+#13977 = SURFACE_STYLE_FILL_AREA(#13978);+#13978 = FILL_AREA_STYLE('',(#13979));+#13979 = FILL_AREA_STYLE_COLOUR('',#13937);+#13980 = STYLED_ITEM('color',(#13981),#478);+#13981 = PRESENTATION_STYLE_ASSIGNMENT((#13982));+#13982 = SURFACE_STYLE_USAGE(.BOTH.,#13983);+#13983 = SURFACE_SIDE_STYLE('',(#13984));+#13984 = SURFACE_STYLE_FILL_AREA(#13985);+#13985 = FILL_AREA_STYLE('',(#13986));+#13986 = FILL_AREA_STYLE_COLOUR('',#13937);+#13987 = STYLED_ITEM('color',(#13988),#562);+#13988 = PRESENTATION_STYLE_ASSIGNMENT((#13989));+#13989 = SURFACE_STYLE_USAGE(.BOTH.,#13990);+#13990 = SURFACE_SIDE_STYLE('',(#13991));+#13991 = SURFACE_STYLE_FILL_AREA(#13992);+#13992 = FILL_AREA_STYLE('',(#13993));+#13993 = FILL_AREA_STYLE_COLOUR('',#13937);+#13994 = STYLED_ITEM('color',(#13995),#589);+#13995 = PRESENTATION_STYLE_ASSIGNMENT((#13996));+#13996 = SURFACE_STYLE_USAGE(.BOTH.,#13997);+#13997 = SURFACE_SIDE_STYLE('',(#13998));+#13998 = SURFACE_STYLE_FILL_AREA(#13999);+#13999 = FILL_AREA_STYLE('',(#14000));+#14000 = FILL_AREA_STYLE_COLOUR('',#13937);+#14001 = STYLED_ITEM('color',(#14002),#596);+#14002 = PRESENTATION_STYLE_ASSIGNMENT((#14003));+#14003 = SURFACE_STYLE_USAGE(.BOTH.,#14004);+#14004 = SURFACE_SIDE_STYLE('',(#14005));+#14005 = SURFACE_STYLE_FILL_AREA(#14006);+#14006 = FILL_AREA_STYLE('',(#14007));+#14007 = FILL_AREA_STYLE_COLOUR('',#13937);+#14008 = STYLED_ITEM('color',(#14009),#651);+#14009 = PRESENTATION_STYLE_ASSIGNMENT((#14010));+#14010 = SURFACE_STYLE_USAGE(.BOTH.,#14011);+#14011 = SURFACE_SIDE_STYLE('',(#14012));+#14012 = SURFACE_STYLE_FILL_AREA(#14013);+#14013 = FILL_AREA_STYLE('',(#14014));+#14014 = FILL_AREA_STYLE_COLOUR('',#13937);+#14015 = STYLED_ITEM('color',(#14016),#657);+#14016 = PRESENTATION_STYLE_ASSIGNMENT((#14017));+#14017 = SURFACE_STYLE_USAGE(.BOTH.,#14018);+#14018 = SURFACE_SIDE_STYLE('',(#14019));+#14019 = SURFACE_STYLE_FILL_AREA(#14020);+#14020 = FILL_AREA_STYLE('',(#14021));+#14021 = FILL_AREA_STYLE_COLOUR('',#14022);+#14022 = COLOUR_RGB('',0.78000000177,0.78000000177,0.760000013601);+#14023 = STYLED_ITEM('color',(#14024),#777);+#14024 = PRESENTATION_STYLE_ASSIGNMENT((#14025));+#14025 = SURFACE_STYLE_USAGE(.BOTH.,#14026);+#14026 = SURFACE_SIDE_STYLE('',(#14027));+#14027 = SURFACE_STYLE_FILL_AREA(#14028);+#14028 = FILL_AREA_STYLE('',(#14029));+#14029 = FILL_AREA_STYLE_COLOUR('',#14022);+#14030 = STYLED_ITEM('color',(#14031),#965);+#14031 = PRESENTATION_STYLE_ASSIGNMENT((#14032));+#14032 = SURFACE_STYLE_USAGE(.BOTH.,#14033);+#14033 = SURFACE_SIDE_STYLE('',(#14034));+#14034 = SURFACE_STYLE_FILL_AREA(#14035);+#14035 = FILL_AREA_STYLE('',(#14036));+#14036 = FILL_AREA_STYLE_COLOUR('',#14022);+#14037 = STYLED_ITEM('color',(#14038),#1036);+#14038 = PRESENTATION_STYLE_ASSIGNMENT((#14039));+#14039 = SURFACE_STYLE_USAGE(.BOTH.,#14040);+#14040 = SURFACE_SIDE_STYLE('',(#14041));+#14041 = SURFACE_STYLE_FILL_AREA(#14042);+#14042 = FILL_AREA_STYLE('',(#14043));+#14043 = FILL_AREA_STYLE_COLOUR('',#14022);+#14044 = STYLED_ITEM('color',(#14045),#1085);+#14045 = PRESENTATION_STYLE_ASSIGNMENT((#14046));+#14046 = SURFACE_STYLE_USAGE(.BOTH.,#14047);+#14047 = SURFACE_SIDE_STYLE('',(#14048));+#14048 = SURFACE_STYLE_FILL_AREA(#14049);+#14049 = FILL_AREA_STYLE('',(#14050));+#14050 = FILL_AREA_STYLE_COLOUR('',#14022);+#14051 = STYLED_ITEM('color',(#14052),#1134);+#14052 = PRESENTATION_STYLE_ASSIGNMENT((#14053));+#14053 = SURFACE_STYLE_USAGE(.BOTH.,#14054);+#14054 = SURFACE_SIDE_STYLE('',(#14055));+#14055 = SURFACE_STYLE_FILL_AREA(#14056);+#14056 = FILL_AREA_STYLE('',(#14057));+#14057 = FILL_AREA_STYLE_COLOUR('',#14022);+#14058 = STYLED_ITEM('color',(#14059),#1183);+#14059 = PRESENTATION_STYLE_ASSIGNMENT((#14060));+#14060 = SURFACE_STYLE_USAGE(.BOTH.,#14061);+#14061 = SURFACE_SIDE_STYLE('',(#14062));+#14062 = SURFACE_STYLE_FILL_AREA(#14063);+#14063 = FILL_AREA_STYLE('',(#14064));+#14064 = FILL_AREA_STYLE_COLOUR('',#14022);+#14065 = STYLED_ITEM('color',(#14066),#1232);+#14066 = PRESENTATION_STYLE_ASSIGNMENT((#14067));+#14067 = SURFACE_STYLE_USAGE(.BOTH.,#14068);+#14068 = SURFACE_SIDE_STYLE('',(#14069));+#14069 = SURFACE_STYLE_FILL_AREA(#14070);+#14070 = FILL_AREA_STYLE('',(#14071));+#14071 = FILL_AREA_STYLE_COLOUR('',#14022);+#14072 = STYLED_ITEM('color',(#14073),#1259);+#14073 = PRESENTATION_STYLE_ASSIGNMENT((#14074));+#14074 = SURFACE_STYLE_USAGE(.BOTH.,#14075);+#14075 = SURFACE_SIDE_STYLE('',(#14076));+#14076 = SURFACE_STYLE_FILL_AREA(#14077);+#14077 = FILL_AREA_STYLE('',(#14078));+#14078 = FILL_AREA_STYLE_COLOUR('',#14022);+#14079 = STYLED_ITEM('color',(#14080),#1290);+#14080 = PRESENTATION_STYLE_ASSIGNMENT((#14081));+#14081 = SURFACE_STYLE_USAGE(.BOTH.,#14082);+#14082 = SURFACE_SIDE_STYLE('',(#14083));+#14083 = SURFACE_STYLE_FILL_AREA(#14084);+#14084 = FILL_AREA_STYLE('',(#14085));+#14085 = FILL_AREA_STYLE_COLOUR('',#14022);+#14086 = STYLED_ITEM('color',(#14087),#1299);+#14087 = PRESENTATION_STYLE_ASSIGNMENT((#14088));+#14088 = SURFACE_STYLE_USAGE(.BOTH.,#14089);+#14089 = SURFACE_SIDE_STYLE('',(#14090));+#14090 = SURFACE_STYLE_FILL_AREA(#14091);+#14091 = FILL_AREA_STYLE('',(#14092));+#14092 = FILL_AREA_STYLE_COLOUR('',#14022);+#14093 = STYLED_ITEM('color',(#14094),#1419);+#14094 = PRESENTATION_STYLE_ASSIGNMENT((#14095));+#14095 = SURFACE_STYLE_USAGE(.BOTH.,#14096);+#14096 = SURFACE_SIDE_STYLE('',(#14097));+#14097 = SURFACE_STYLE_FILL_AREA(#14098);+#14098 = FILL_AREA_STYLE('',(#14099));+#14099 = FILL_AREA_STYLE_COLOUR('',#14022);+#14100 = STYLED_ITEM('color',(#14101),#1607);+#14101 = PRESENTATION_STYLE_ASSIGNMENT((#14102));+#14102 = SURFACE_STYLE_USAGE(.BOTH.,#14103);+#14103 = SURFACE_SIDE_STYLE('',(#14104));+#14104 = SURFACE_STYLE_FILL_AREA(#14105);+#14105 = FILL_AREA_STYLE('',(#14106));+#14106 = FILL_AREA_STYLE_COLOUR('',#14022);+#14107 = STYLED_ITEM('color',(#14108),#1678);+#14108 = PRESENTATION_STYLE_ASSIGNMENT((#14109));+#14109 = SURFACE_STYLE_USAGE(.BOTH.,#14110);+#14110 = SURFACE_SIDE_STYLE('',(#14111));+#14111 = SURFACE_STYLE_FILL_AREA(#14112);+#14112 = FILL_AREA_STYLE('',(#14113));+#14113 = FILL_AREA_STYLE_COLOUR('',#14022);+#14114 = STYLED_ITEM('color',(#14115),#1727);+#14115 = PRESENTATION_STYLE_ASSIGNMENT((#14116));+#14116 = SURFACE_STYLE_USAGE(.BOTH.,#14117);+#14117 = SURFACE_SIDE_STYLE('',(#14118));+#14118 = SURFACE_STYLE_FILL_AREA(#14119);+#14119 = FILL_AREA_STYLE('',(#14120));+#14120 = FILL_AREA_STYLE_COLOUR('',#14022);+#14121 = STYLED_ITEM('color',(#14122),#1776);+#14122 = PRESENTATION_STYLE_ASSIGNMENT((#14123));+#14123 = SURFACE_STYLE_USAGE(.BOTH.,#14124);+#14124 = SURFACE_SIDE_STYLE('',(#14125));+#14125 = SURFACE_STYLE_FILL_AREA(#14126);+#14126 = FILL_AREA_STYLE('',(#14127));+#14127 = FILL_AREA_STYLE_COLOUR('',#14022);+#14128 = STYLED_ITEM('color',(#14129),#1825);+#14129 = PRESENTATION_STYLE_ASSIGNMENT((#14130));+#14130 = SURFACE_STYLE_USAGE(.BOTH.,#14131);+#14131 = SURFACE_SIDE_STYLE('',(#14132));+#14132 = SURFACE_STYLE_FILL_AREA(#14133);+#14133 = FILL_AREA_STYLE('',(#14134));+#14134 = FILL_AREA_STYLE_COLOUR('',#14022);+#14135 = STYLED_ITEM('color',(#14136),#1874);+#14136 = PRESENTATION_STYLE_ASSIGNMENT((#14137));+#14137 = SURFACE_STYLE_USAGE(.BOTH.,#14138);+#14138 = SURFACE_SIDE_STYLE('',(#14139));+#14139 = SURFACE_STYLE_FILL_AREA(#14140);+#14140 = FILL_AREA_STYLE('',(#14141));+#14141 = FILL_AREA_STYLE_COLOUR('',#14022);+#14142 = STYLED_ITEM('color',(#14143),#1901);+#14143 = PRESENTATION_STYLE_ASSIGNMENT((#14144));+#14144 = SURFACE_STYLE_USAGE(.BOTH.,#14145);+#14145 = SURFACE_SIDE_STYLE('',(#14146));+#14146 = SURFACE_STYLE_FILL_AREA(#14147);+#14147 = FILL_AREA_STYLE('',(#14148));+#14148 = FILL_AREA_STYLE_COLOUR('',#14022);+#14149 = STYLED_ITEM('color',(#14150),#1932);+#14150 = PRESENTATION_STYLE_ASSIGNMENT((#14151));+#14151 = SURFACE_STYLE_USAGE(.BOTH.,#14152);+#14152 = SURFACE_SIDE_STYLE('',(#14153));+#14153 = SURFACE_STYLE_FILL_AREA(#14154);+#14154 = FILL_AREA_STYLE('',(#14155));+#14155 = FILL_AREA_STYLE_COLOUR('',#14022);+#14156 = STYLED_ITEM('color',(#14157),#1941);+#14157 = PRESENTATION_STYLE_ASSIGNMENT((#14158));+#14158 = SURFACE_STYLE_USAGE(.BOTH.,#14159);+#14159 = SURFACE_SIDE_STYLE('',(#14160));+#14160 = SURFACE_STYLE_FILL_AREA(#14161);+#14161 = FILL_AREA_STYLE('',(#14162));+#14162 = FILL_AREA_STYLE_COLOUR('',#14022);+#14163 = STYLED_ITEM('color',(#14164),#2061);+#14164 = PRESENTATION_STYLE_ASSIGNMENT((#14165));+#14165 = SURFACE_STYLE_USAGE(.BOTH.,#14166);+#14166 = SURFACE_SIDE_STYLE('',(#14167));+#14167 = SURFACE_STYLE_FILL_AREA(#14168);+#14168 = FILL_AREA_STYLE('',(#14169));+#14169 = FILL_AREA_STYLE_COLOUR('',#14022);+#14170 = STYLED_ITEM('color',(#14171),#2249);+#14171 = PRESENTATION_STYLE_ASSIGNMENT((#14172));+#14172 = SURFACE_STYLE_USAGE(.BOTH.,#14173);+#14173 = SURFACE_SIDE_STYLE('',(#14174));+#14174 = SURFACE_STYLE_FILL_AREA(#14175);+#14175 = FILL_AREA_STYLE('',(#14176));+#14176 = FILL_AREA_STYLE_COLOUR('',#14022);+#14177 = STYLED_ITEM('color',(#14178),#2320);+#14178 = PRESENTATION_STYLE_ASSIGNMENT((#14179));+#14179 = SURFACE_STYLE_USAGE(.BOTH.,#14180);+#14180 = SURFACE_SIDE_STYLE('',(#14181));+#14181 = SURFACE_STYLE_FILL_AREA(#14182);+#14182 = FILL_AREA_STYLE('',(#14183));+#14183 = FILL_AREA_STYLE_COLOUR('',#14022);+#14184 = STYLED_ITEM('color',(#14185),#2369);+#14185 = PRESENTATION_STYLE_ASSIGNMENT((#14186));+#14186 = SURFACE_STYLE_USAGE(.BOTH.,#14187);+#14187 = SURFACE_SIDE_STYLE('',(#14188));+#14188 = SURFACE_STYLE_FILL_AREA(#14189);+#14189 = FILL_AREA_STYLE('',(#14190));+#14190 = FILL_AREA_STYLE_COLOUR('',#14022);+#14191 = STYLED_ITEM('color',(#14192),#2418);+#14192 = PRESENTATION_STYLE_ASSIGNMENT((#14193));+#14193 = SURFACE_STYLE_USAGE(.BOTH.,#14194);+#14194 = SURFACE_SIDE_STYLE('',(#14195));+#14195 = SURFACE_STYLE_FILL_AREA(#14196);+#14196 = FILL_AREA_STYLE('',(#14197));+#14197 = FILL_AREA_STYLE_COLOUR('',#14022);+#14198 = STYLED_ITEM('color',(#14199),#2467);+#14199 = PRESENTATION_STYLE_ASSIGNMENT((#14200));+#14200 = SURFACE_STYLE_USAGE(.BOTH.,#14201);+#14201 = SURFACE_SIDE_STYLE('',(#14202));+#14202 = SURFACE_STYLE_FILL_AREA(#14203);+#14203 = FILL_AREA_STYLE('',(#14204));+#14204 = FILL_AREA_STYLE_COLOUR('',#14022);+#14205 = STYLED_ITEM('color',(#14206),#2516);+#14206 = PRESENTATION_STYLE_ASSIGNMENT((#14207));+#14207 = SURFACE_STYLE_USAGE(.BOTH.,#14208);+#14208 = SURFACE_SIDE_STYLE('',(#14209));+#14209 = SURFACE_STYLE_FILL_AREA(#14210);+#14210 = FILL_AREA_STYLE('',(#14211));+#14211 = FILL_AREA_STYLE_COLOUR('',#14022);+#14212 = STYLED_ITEM('color',(#14213),#2543);+#14213 = PRESENTATION_STYLE_ASSIGNMENT((#14214));+#14214 = SURFACE_STYLE_USAGE(.BOTH.,#14215);+#14215 = SURFACE_SIDE_STYLE('',(#14216));+#14216 = SURFACE_STYLE_FILL_AREA(#14217);+#14217 = FILL_AREA_STYLE('',(#14218));+#14218 = FILL_AREA_STYLE_COLOUR('',#14022);+#14219 = STYLED_ITEM('color',(#14220),#2574);+#14220 = PRESENTATION_STYLE_ASSIGNMENT((#14221));+#14221 = SURFACE_STYLE_USAGE(.BOTH.,#14222);+#14222 = SURFACE_SIDE_STYLE('',(#14223));+#14223 = SURFACE_STYLE_FILL_AREA(#14224);+#14224 = FILL_AREA_STYLE('',(#14225));+#14225 = FILL_AREA_STYLE_COLOUR('',#14022);+#14226 = STYLED_ITEM('color',(#14227),#2583);+#14227 = PRESENTATION_STYLE_ASSIGNMENT((#14228));+#14228 = SURFACE_STYLE_USAGE(.BOTH.,#14229);+#14229 = SURFACE_SIDE_STYLE('',(#14230));+#14230 = SURFACE_STYLE_FILL_AREA(#14231);+#14231 = FILL_AREA_STYLE('',(#14232));+#14232 = FILL_AREA_STYLE_COLOUR('',#14022);+#14233 = STYLED_ITEM('color',(#14234),#2703);+#14234 = PRESENTATION_STYLE_ASSIGNMENT((#14235));+#14235 = SURFACE_STYLE_USAGE(.BOTH.,#14236);+#14236 = SURFACE_SIDE_STYLE('',(#14237));+#14237 = SURFACE_STYLE_FILL_AREA(#14238);+#14238 = FILL_AREA_STYLE('',(#14239));+#14239 = FILL_AREA_STYLE_COLOUR('',#14022);+#14240 = STYLED_ITEM('color',(#14241),#2891);+#14241 = PRESENTATION_STYLE_ASSIGNMENT((#14242));+#14242 = SURFACE_STYLE_USAGE(.BOTH.,#14243);+#14243 = SURFACE_SIDE_STYLE('',(#14244));+#14244 = SURFACE_STYLE_FILL_AREA(#14245);+#14245 = FILL_AREA_STYLE('',(#14246));+#14246 = FILL_AREA_STYLE_COLOUR('',#14022);+#14247 = STYLED_ITEM('color',(#14248),#2962);+#14248 = PRESENTATION_STYLE_ASSIGNMENT((#14249));+#14249 = SURFACE_STYLE_USAGE(.BOTH.,#14250);+#14250 = SURFACE_SIDE_STYLE('',(#14251));+#14251 = SURFACE_STYLE_FILL_AREA(#14252);+#14252 = FILL_AREA_STYLE('',(#14253));+#14253 = FILL_AREA_STYLE_COLOUR('',#14022);+#14254 = STYLED_ITEM('color',(#14255),#3011);+#14255 = PRESENTATION_STYLE_ASSIGNMENT((#14256));+#14256 = SURFACE_STYLE_USAGE(.BOTH.,#14257);+#14257 = SURFACE_SIDE_STYLE('',(#14258));+#14258 = SURFACE_STYLE_FILL_AREA(#14259);+#14259 = FILL_AREA_STYLE('',(#14260));+#14260 = FILL_AREA_STYLE_COLOUR('',#14022);+#14261 = STYLED_ITEM('color',(#14262),#3060);+#14262 = PRESENTATION_STYLE_ASSIGNMENT((#14263));+#14263 = SURFACE_STYLE_USAGE(.BOTH.,#14264);+#14264 = SURFACE_SIDE_STYLE('',(#14265));+#14265 = SURFACE_STYLE_FILL_AREA(#14266);+#14266 = FILL_AREA_STYLE('',(#14267));+#14267 = FILL_AREA_STYLE_COLOUR('',#14022);+#14268 = STYLED_ITEM('color',(#14269),#3109);+#14269 = PRESENTATION_STYLE_ASSIGNMENT((#14270));+#14270 = SURFACE_STYLE_USAGE(.BOTH.,#14271);+#14271 = SURFACE_SIDE_STYLE('',(#14272));+#14272 = SURFACE_STYLE_FILL_AREA(#14273);+#14273 = FILL_AREA_STYLE('',(#14274));+#14274 = FILL_AREA_STYLE_COLOUR('',#14022);+#14275 = STYLED_ITEM('color',(#14276),#3158);+#14276 = PRESENTATION_STYLE_ASSIGNMENT((#14277));+#14277 = SURFACE_STYLE_USAGE(.BOTH.,#14278);+#14278 = SURFACE_SIDE_STYLE('',(#14279));+#14279 = SURFACE_STYLE_FILL_AREA(#14280);+#14280 = FILL_AREA_STYLE('',(#14281));+#14281 = FILL_AREA_STYLE_COLOUR('',#14022);+#14282 = STYLED_ITEM('color',(#14283),#3185);+#14283 = PRESENTATION_STYLE_ASSIGNMENT((#14284));+#14284 = SURFACE_STYLE_USAGE(.BOTH.,#14285);+#14285 = SURFACE_SIDE_STYLE('',(#14286));+#14286 = SURFACE_STYLE_FILL_AREA(#14287);+#14287 = FILL_AREA_STYLE('',(#14288));+#14288 = FILL_AREA_STYLE_COLOUR('',#14022);+#14289 = STYLED_ITEM('color',(#14290),#3216);+#14290 = PRESENTATION_STYLE_ASSIGNMENT((#14291));+#14291 = SURFACE_STYLE_USAGE(.BOTH.,#14292);+#14292 = SURFACE_SIDE_STYLE('',(#14293));+#14293 = SURFACE_STYLE_FILL_AREA(#14294);+#14294 = FILL_AREA_STYLE('',(#14295));+#14295 = FILL_AREA_STYLE_COLOUR('',#14022);+#14296 = STYLED_ITEM('color',(#14297),#3225);+#14297 = PRESENTATION_STYLE_ASSIGNMENT((#14298));+#14298 = SURFACE_STYLE_USAGE(.BOTH.,#14299);+#14299 = SURFACE_SIDE_STYLE('',(#14300));+#14300 = SURFACE_STYLE_FILL_AREA(#14301);+#14301 = FILL_AREA_STYLE('',(#14302));+#14302 = FILL_AREA_STYLE_COLOUR('',#14022);+#14303 = STYLED_ITEM('color',(#14304),#3345);+#14304 = PRESENTATION_STYLE_ASSIGNMENT((#14305));+#14305 = SURFACE_STYLE_USAGE(.BOTH.,#14306);+#14306 = SURFACE_SIDE_STYLE('',(#14307));+#14307 = SURFACE_STYLE_FILL_AREA(#14308);+#14308 = FILL_AREA_STYLE('',(#14309));+#14309 = FILL_AREA_STYLE_COLOUR('',#14022);+#14310 = STYLED_ITEM('color',(#14311),#3533);+#14311 = PRESENTATION_STYLE_ASSIGNMENT((#14312));+#14312 = SURFACE_STYLE_USAGE(.BOTH.,#14313);+#14313 = SURFACE_SIDE_STYLE('',(#14314));+#14314 = SURFACE_STYLE_FILL_AREA(#14315);+#14315 = FILL_AREA_STYLE('',(#14316));+#14316 = FILL_AREA_STYLE_COLOUR('',#14022);+#14317 = STYLED_ITEM('color',(#14318),#3604);+#14318 = PRESENTATION_STYLE_ASSIGNMENT((#14319));+#14319 = SURFACE_STYLE_USAGE(.BOTH.,#14320);+#14320 = SURFACE_SIDE_STYLE('',(#14321));+#14321 = SURFACE_STYLE_FILL_AREA(#14322);+#14322 = FILL_AREA_STYLE('',(#14323));+#14323 = FILL_AREA_STYLE_COLOUR('',#14022);+#14324 = STYLED_ITEM('color',(#14325),#3653);+#14325 = PRESENTATION_STYLE_ASSIGNMENT((#14326));+#14326 = SURFACE_STYLE_USAGE(.BOTH.,#14327);+#14327 = SURFACE_SIDE_STYLE('',(#14328));+#14328 = SURFACE_STYLE_FILL_AREA(#14329);+#14329 = FILL_AREA_STYLE('',(#14330));+#14330 = FILL_AREA_STYLE_COLOUR('',#14022);+#14331 = STYLED_ITEM('color',(#14332),#3702);+#14332 = PRESENTATION_STYLE_ASSIGNMENT((#14333));+#14333 = SURFACE_STYLE_USAGE(.BOTH.,#14334);+#14334 = SURFACE_SIDE_STYLE('',(#14335));+#14335 = SURFACE_STYLE_FILL_AREA(#14336);+#14336 = FILL_AREA_STYLE('',(#14337));+#14337 = FILL_AREA_STYLE_COLOUR('',#14022);+#14338 = STYLED_ITEM('color',(#14339),#3751);+#14339 = PRESENTATION_STYLE_ASSIGNMENT((#14340));+#14340 = SURFACE_STYLE_USAGE(.BOTH.,#14341);+#14341 = SURFACE_SIDE_STYLE('',(#14342));+#14342 = SURFACE_STYLE_FILL_AREA(#14343);+#14343 = FILL_AREA_STYLE('',(#14344));+#14344 = FILL_AREA_STYLE_COLOUR('',#14022);+#14345 = STYLED_ITEM('color',(#14346),#3800);+#14346 = PRESENTATION_STYLE_ASSIGNMENT((#14347));+#14347 = SURFACE_STYLE_USAGE(.BOTH.,#14348);+#14348 = SURFACE_SIDE_STYLE('',(#14349));+#14349 = SURFACE_STYLE_FILL_AREA(#14350);+#14350 = FILL_AREA_STYLE('',(#14351));+#14351 = FILL_AREA_STYLE_COLOUR('',#14022);+#14352 = STYLED_ITEM('color',(#14353),#3827);+#14353 = PRESENTATION_STYLE_ASSIGNMENT((#14354));+#14354 = SURFACE_STYLE_USAGE(.BOTH.,#14355);+#14355 = SURFACE_SIDE_STYLE('',(#14356));+#14356 = SURFACE_STYLE_FILL_AREA(#14357);+#14357 = FILL_AREA_STYLE('',(#14358));+#14358 = FILL_AREA_STYLE_COLOUR('',#14022);+#14359 = STYLED_ITEM('color',(#14360),#3858);+#14360 = PRESENTATION_STYLE_ASSIGNMENT((#14361));+#14361 = SURFACE_STYLE_USAGE(.BOTH.,#14362);+#14362 = SURFACE_SIDE_STYLE('',(#14363));+#14363 = SURFACE_STYLE_FILL_AREA(#14364);+#14364 = FILL_AREA_STYLE('',(#14365));+#14365 = FILL_AREA_STYLE_COLOUR('',#14022);+#14366 = STYLED_ITEM('color',(#14367),#3867);+#14367 = PRESENTATION_STYLE_ASSIGNMENT((#14368));+#14368 = SURFACE_STYLE_USAGE(.BOTH.,#14369);+#14369 = SURFACE_SIDE_STYLE('',(#14370));+#14370 = SURFACE_STYLE_FILL_AREA(#14371);+#14371 = FILL_AREA_STYLE('',(#14372));+#14372 = FILL_AREA_STYLE_COLOUR('',#14022);+#14373 = STYLED_ITEM('color',(#14374),#3987);+#14374 = PRESENTATION_STYLE_ASSIGNMENT((#14375));+#14375 = SURFACE_STYLE_USAGE(.BOTH.,#14376);+#14376 = SURFACE_SIDE_STYLE('',(#14377));+#14377 = SURFACE_STYLE_FILL_AREA(#14378);+#14378 = FILL_AREA_STYLE('',(#14379));+#14379 = FILL_AREA_STYLE_COLOUR('',#14022);+#14380 = STYLED_ITEM('color',(#14381),#4175);+#14381 = PRESENTATION_STYLE_ASSIGNMENT((#14382));+#14382 = SURFACE_STYLE_USAGE(.BOTH.,#14383);+#14383 = SURFACE_SIDE_STYLE('',(#14384));+#14384 = SURFACE_STYLE_FILL_AREA(#14385);+#14385 = FILL_AREA_STYLE('',(#14386));+#14386 = FILL_AREA_STYLE_COLOUR('',#14022);+#14387 = STYLED_ITEM('color',(#14388),#4246);+#14388 = PRESENTATION_STYLE_ASSIGNMENT((#14389));+#14389 = SURFACE_STYLE_USAGE(.BOTH.,#14390);+#14390 = SURFACE_SIDE_STYLE('',(#14391));+#14391 = SURFACE_STYLE_FILL_AREA(#14392);+#14392 = FILL_AREA_STYLE('',(#14393));+#14393 = FILL_AREA_STYLE_COLOUR('',#14022);+#14394 = STYLED_ITEM('color',(#14395),#4295);+#14395 = PRESENTATION_STYLE_ASSIGNMENT((#14396));+#14396 = SURFACE_STYLE_USAGE(.BOTH.,#14397);+#14397 = SURFACE_SIDE_STYLE('',(#14398));+#14398 = SURFACE_STYLE_FILL_AREA(#14399);+#14399 = FILL_AREA_STYLE('',(#14400));+#14400 = FILL_AREA_STYLE_COLOUR('',#14022);+#14401 = STYLED_ITEM('color',(#14402),#4344);+#14402 = PRESENTATION_STYLE_ASSIGNMENT((#14403));+#14403 = SURFACE_STYLE_USAGE(.BOTH.,#14404);+#14404 = SURFACE_SIDE_STYLE('',(#14405));+#14405 = SURFACE_STYLE_FILL_AREA(#14406);+#14406 = FILL_AREA_STYLE('',(#14407));+#14407 = FILL_AREA_STYLE_COLOUR('',#14022);+#14408 = STYLED_ITEM('color',(#14409),#4393);+#14409 = PRESENTATION_STYLE_ASSIGNMENT((#14410));+#14410 = SURFACE_STYLE_USAGE(.BOTH.,#14411);+#14411 = SURFACE_SIDE_STYLE('',(#14412));+#14412 = SURFACE_STYLE_FILL_AREA(#14413);+#14413 = FILL_AREA_STYLE('',(#14414));+#14414 = FILL_AREA_STYLE_COLOUR('',#14022);+#14415 = STYLED_ITEM('color',(#14416),#4442);+#14416 = PRESENTATION_STYLE_ASSIGNMENT((#14417));+#14417 = SURFACE_STYLE_USAGE(.BOTH.,#14418);+#14418 = SURFACE_SIDE_STYLE('',(#14419));+#14419 = SURFACE_STYLE_FILL_AREA(#14420);+#14420 = FILL_AREA_STYLE('',(#14421));+#14421 = FILL_AREA_STYLE_COLOUR('',#14022);+#14422 = STYLED_ITEM('color',(#14423),#4469);+#14423 = PRESENTATION_STYLE_ASSIGNMENT((#14424));+#14424 = SURFACE_STYLE_USAGE(.BOTH.,#14425);+#14425 = SURFACE_SIDE_STYLE('',(#14426));+#14426 = SURFACE_STYLE_FILL_AREA(#14427);+#14427 = FILL_AREA_STYLE('',(#14428));+#14428 = FILL_AREA_STYLE_COLOUR('',#14022);+#14429 = STYLED_ITEM('color',(#14430),#4500);+#14430 = PRESENTATION_STYLE_ASSIGNMENT((#14431));+#14431 = SURFACE_STYLE_USAGE(.BOTH.,#14432);+#14432 = SURFACE_SIDE_STYLE('',(#14433));+#14433 = SURFACE_STYLE_FILL_AREA(#14434);+#14434 = FILL_AREA_STYLE('',(#14435));+#14435 = FILL_AREA_STYLE_COLOUR('',#14022);+#14436 = STYLED_ITEM('color',(#14437),#4509);+#14437 = PRESENTATION_STYLE_ASSIGNMENT((#14438));+#14438 = SURFACE_STYLE_USAGE(.BOTH.,#14439);+#14439 = SURFACE_SIDE_STYLE('',(#14440));+#14440 = SURFACE_STYLE_FILL_AREA(#14441);+#14441 = FILL_AREA_STYLE('',(#14442));+#14442 = FILL_AREA_STYLE_COLOUR('',#14022);+#14443 = STYLED_ITEM('color',(#14444),#4629);+#14444 = PRESENTATION_STYLE_ASSIGNMENT((#14445));+#14445 = SURFACE_STYLE_USAGE(.BOTH.,#14446);+#14446 = SURFACE_SIDE_STYLE('',(#14447));+#14447 = SURFACE_STYLE_FILL_AREA(#14448);+#14448 = FILL_AREA_STYLE('',(#14449));+#14449 = FILL_AREA_STYLE_COLOUR('',#14022);+#14450 = STYLED_ITEM('color',(#14451),#4817);+#14451 = PRESENTATION_STYLE_ASSIGNMENT((#14452));+#14452 = SURFACE_STYLE_USAGE(.BOTH.,#14453);+#14453 = SURFACE_SIDE_STYLE('',(#14454));+#14454 = SURFACE_STYLE_FILL_AREA(#14455);+#14455 = FILL_AREA_STYLE('',(#14456));+#14456 = FILL_AREA_STYLE_COLOUR('',#14022);+#14457 = STYLED_ITEM('color',(#14458),#4888);+#14458 = PRESENTATION_STYLE_ASSIGNMENT((#14459));+#14459 = SURFACE_STYLE_USAGE(.BOTH.,#14460);+#14460 = SURFACE_SIDE_STYLE('',(#14461));+#14461 = SURFACE_STYLE_FILL_AREA(#14462);+#14462 = FILL_AREA_STYLE('',(#14463));+#14463 = FILL_AREA_STYLE_COLOUR('',#14022);+#14464 = STYLED_ITEM('color',(#14465),#4937);+#14465 = PRESENTATION_STYLE_ASSIGNMENT((#14466));+#14466 = SURFACE_STYLE_USAGE(.BOTH.,#14467);+#14467 = SURFACE_SIDE_STYLE('',(#14468));+#14468 = SURFACE_STYLE_FILL_AREA(#14469);+#14469 = FILL_AREA_STYLE('',(#14470));+#14470 = FILL_AREA_STYLE_COLOUR('',#14022);+#14471 = STYLED_ITEM('color',(#14472),#4986);+#14472 = PRESENTATION_STYLE_ASSIGNMENT((#14473));+#14473 = SURFACE_STYLE_USAGE(.BOTH.,#14474);+#14474 = SURFACE_SIDE_STYLE('',(#14475));+#14475 = SURFACE_STYLE_FILL_AREA(#14476);+#14476 = FILL_AREA_STYLE('',(#14477));+#14477 = FILL_AREA_STYLE_COLOUR('',#14022);+#14478 = STYLED_ITEM('color',(#14479),#5035);+#14479 = PRESENTATION_STYLE_ASSIGNMENT((#14480));+#14480 = SURFACE_STYLE_USAGE(.BOTH.,#14481);+#14481 = SURFACE_SIDE_STYLE('',(#14482));+#14482 = SURFACE_STYLE_FILL_AREA(#14483);+#14483 = FILL_AREA_STYLE('',(#14484));+#14484 = FILL_AREA_STYLE_COLOUR('',#14022);+#14485 = STYLED_ITEM('color',(#14486),#5084);+#14486 = PRESENTATION_STYLE_ASSIGNMENT((#14487));+#14487 = SURFACE_STYLE_USAGE(.BOTH.,#14488);+#14488 = SURFACE_SIDE_STYLE('',(#14489));+#14489 = SURFACE_STYLE_FILL_AREA(#14490);+#14490 = FILL_AREA_STYLE('',(#14491));+#14491 = FILL_AREA_STYLE_COLOUR('',#14022);+#14492 = STYLED_ITEM('color',(#14493),#5111);+#14493 = PRESENTATION_STYLE_ASSIGNMENT((#14494));+#14494 = SURFACE_STYLE_USAGE(.BOTH.,#14495);+#14495 = SURFACE_SIDE_STYLE('',(#14496));+#14496 = SURFACE_STYLE_FILL_AREA(#14497);+#14497 = FILL_AREA_STYLE('',(#14498));+#14498 = FILL_AREA_STYLE_COLOUR('',#14022);+#14499 = STYLED_ITEM('color',(#14500),#5142);+#14500 = PRESENTATION_STYLE_ASSIGNMENT((#14501));+#14501 = SURFACE_STYLE_USAGE(.BOTH.,#14502);+#14502 = SURFACE_SIDE_STYLE('',(#14503));+#14503 = SURFACE_STYLE_FILL_AREA(#14504);+#14504 = FILL_AREA_STYLE('',(#14505));+#14505 = FILL_AREA_STYLE_COLOUR('',#14022);+#14506 = STYLED_ITEM('color',(#14507),#5151);+#14507 = PRESENTATION_STYLE_ASSIGNMENT((#14508));+#14508 = SURFACE_STYLE_USAGE(.BOTH.,#14509);+#14509 = SURFACE_SIDE_STYLE('',(#14510));+#14510 = SURFACE_STYLE_FILL_AREA(#14511);+#14511 = FILL_AREA_STYLE('',(#14512));+#14512 = FILL_AREA_STYLE_COLOUR('',#14022);+#14513 = STYLED_ITEM('color',(#14514),#5271);+#14514 = PRESENTATION_STYLE_ASSIGNMENT((#14515));+#14515 = SURFACE_STYLE_USAGE(.BOTH.,#14516);+#14516 = SURFACE_SIDE_STYLE('',(#14517));+#14517 = SURFACE_STYLE_FILL_AREA(#14518);+#14518 = FILL_AREA_STYLE('',(#14519));+#14519 = FILL_AREA_STYLE_COLOUR('',#14022);+#14520 = STYLED_ITEM('color',(#14521),#5459);+#14521 = PRESENTATION_STYLE_ASSIGNMENT((#14522));+#14522 = SURFACE_STYLE_USAGE(.BOTH.,#14523);+#14523 = SURFACE_SIDE_STYLE('',(#14524));+#14524 = SURFACE_STYLE_FILL_AREA(#14525);+#14525 = FILL_AREA_STYLE('',(#14526));+#14526 = FILL_AREA_STYLE_COLOUR('',#14022);+#14527 = STYLED_ITEM('color',(#14528),#5530);+#14528 = PRESENTATION_STYLE_ASSIGNMENT((#14529));+#14529 = SURFACE_STYLE_USAGE(.BOTH.,#14530);+#14530 = SURFACE_SIDE_STYLE('',(#14531));+#14531 = SURFACE_STYLE_FILL_AREA(#14532);+#14532 = FILL_AREA_STYLE('',(#14533));+#14533 = FILL_AREA_STYLE_COLOUR('',#14022);+#14534 = STYLED_ITEM('color',(#14535),#5579);+#14535 = PRESENTATION_STYLE_ASSIGNMENT((#14536));+#14536 = SURFACE_STYLE_USAGE(.BOTH.,#14537);+#14537 = SURFACE_SIDE_STYLE('',(#14538));+#14538 = SURFACE_STYLE_FILL_AREA(#14539);+#14539 = FILL_AREA_STYLE('',(#14540));+#14540 = FILL_AREA_STYLE_COLOUR('',#14022);+#14541 = STYLED_ITEM('color',(#14542),#5628);+#14542 = PRESENTATION_STYLE_ASSIGNMENT((#14543));+#14543 = SURFACE_STYLE_USAGE(.BOTH.,#14544);+#14544 = SURFACE_SIDE_STYLE('',(#14545));+#14545 = SURFACE_STYLE_FILL_AREA(#14546);+#14546 = FILL_AREA_STYLE('',(#14547));+#14547 = FILL_AREA_STYLE_COLOUR('',#14022);+#14548 = STYLED_ITEM('color',(#14549),#5677);+#14549 = PRESENTATION_STYLE_ASSIGNMENT((#14550));+#14550 = SURFACE_STYLE_USAGE(.BOTH.,#14551);+#14551 = SURFACE_SIDE_STYLE('',(#14552));+#14552 = SURFACE_STYLE_FILL_AREA(#14553);+#14553 = FILL_AREA_STYLE('',(#14554));+#14554 = FILL_AREA_STYLE_COLOUR('',#14022);+#14555 = STYLED_ITEM('color',(#14556),#5726);+#14556 = PRESENTATION_STYLE_ASSIGNMENT((#14557));+#14557 = SURFACE_STYLE_USAGE(.BOTH.,#14558);+#14558 = SURFACE_SIDE_STYLE('',(#14559));+#14559 = SURFACE_STYLE_FILL_AREA(#14560);+#14560 = FILL_AREA_STYLE('',(#14561));+#14561 = FILL_AREA_STYLE_COLOUR('',#14022);+#14562 = STYLED_ITEM('color',(#14563),#5753);+#14563 = PRESENTATION_STYLE_ASSIGNMENT((#14564));+#14564 = SURFACE_STYLE_USAGE(.BOTH.,#14565);+#14565 = SURFACE_SIDE_STYLE('',(#14566));+#14566 = SURFACE_STYLE_FILL_AREA(#14567);+#14567 = FILL_AREA_STYLE('',(#14568));+#14568 = FILL_AREA_STYLE_COLOUR('',#14022);+#14569 = STYLED_ITEM('color',(#14570),#5784);+#14570 = PRESENTATION_STYLE_ASSIGNMENT((#14571));+#14571 = SURFACE_STYLE_USAGE(.BOTH.,#14572);+#14572 = SURFACE_SIDE_STYLE('',(#14573));+#14573 = SURFACE_STYLE_FILL_AREA(#14574);+#14574 = FILL_AREA_STYLE('',(#14575));+#14575 = FILL_AREA_STYLE_COLOUR('',#14022);+#14576 = STYLED_ITEM('color',(#14577),#5793);+#14577 = PRESENTATION_STYLE_ASSIGNMENT((#14578));+#14578 = SURFACE_STYLE_USAGE(.BOTH.,#14579);+#14579 = SURFACE_SIDE_STYLE('',(#14580));+#14580 = SURFACE_STYLE_FILL_AREA(#14581);+#14581 = FILL_AREA_STYLE('',(#14582));+#14582 = FILL_AREA_STYLE_COLOUR('',#14022);+#14583 = STYLED_ITEM('color',(#14584),#5913);+#14584 = PRESENTATION_STYLE_ASSIGNMENT((#14585));+#14585 = SURFACE_STYLE_USAGE(.BOTH.,#14586);+#14586 = SURFACE_SIDE_STYLE('',(#14587));+#14587 = SURFACE_STYLE_FILL_AREA(#14588);+#14588 = FILL_AREA_STYLE('',(#14589));+#14589 = FILL_AREA_STYLE_COLOUR('',#14022);+#14590 = STYLED_ITEM('color',(#14591),#6101);+#14591 = PRESENTATION_STYLE_ASSIGNMENT((#14592));+#14592 = SURFACE_STYLE_USAGE(.BOTH.,#14593);+#14593 = SURFACE_SIDE_STYLE('',(#14594));+#14594 = SURFACE_STYLE_FILL_AREA(#14595);+#14595 = FILL_AREA_STYLE('',(#14596));+#14596 = FILL_AREA_STYLE_COLOUR('',#14022);+#14597 = STYLED_ITEM('color',(#14598),#6172);+#14598 = PRESENTATION_STYLE_ASSIGNMENT((#14599));+#14599 = SURFACE_STYLE_USAGE(.BOTH.,#14600);+#14600 = SURFACE_SIDE_STYLE('',(#14601));+#14601 = SURFACE_STYLE_FILL_AREA(#14602);+#14602 = FILL_AREA_STYLE('',(#14603));+#14603 = FILL_AREA_STYLE_COLOUR('',#14022);+#14604 = STYLED_ITEM('color',(#14605),#6221);+#14605 = PRESENTATION_STYLE_ASSIGNMENT((#14606));+#14606 = SURFACE_STYLE_USAGE(.BOTH.,#14607);+#14607 = SURFACE_SIDE_STYLE('',(#14608));+#14608 = SURFACE_STYLE_FILL_AREA(#14609);+#14609 = FILL_AREA_STYLE('',(#14610));+#14610 = FILL_AREA_STYLE_COLOUR('',#14022);+#14611 = STYLED_ITEM('color',(#14612),#6270);+#14612 = PRESENTATION_STYLE_ASSIGNMENT((#14613));+#14613 = SURFACE_STYLE_USAGE(.BOTH.,#14614);+#14614 = SURFACE_SIDE_STYLE('',(#14615));+#14615 = SURFACE_STYLE_FILL_AREA(#14616);+#14616 = FILL_AREA_STYLE('',(#14617));+#14617 = FILL_AREA_STYLE_COLOUR('',#14022);+#14618 = STYLED_ITEM('color',(#14619),#6319);+#14619 = PRESENTATION_STYLE_ASSIGNMENT((#14620));+#14620 = SURFACE_STYLE_USAGE(.BOTH.,#14621);+#14621 = SURFACE_SIDE_STYLE('',(#14622));+#14622 = SURFACE_STYLE_FILL_AREA(#14623);+#14623 = FILL_AREA_STYLE('',(#14624));+#14624 = FILL_AREA_STYLE_COLOUR('',#14022);+#14625 = STYLED_ITEM('color',(#14626),#6368);+#14626 = PRESENTATION_STYLE_ASSIGNMENT((#14627));+#14627 = SURFACE_STYLE_USAGE(.BOTH.,#14628);+#14628 = SURFACE_SIDE_STYLE('',(#14629));+#14629 = SURFACE_STYLE_FILL_AREA(#14630);+#14630 = FILL_AREA_STYLE('',(#14631));+#14631 = FILL_AREA_STYLE_COLOUR('',#14022);+#14632 = STYLED_ITEM('color',(#14633),#6395);+#14633 = PRESENTATION_STYLE_ASSIGNMENT((#14634));+#14634 = SURFACE_STYLE_USAGE(.BOTH.,#14635);+#14635 = SURFACE_SIDE_STYLE('',(#14636));+#14636 = SURFACE_STYLE_FILL_AREA(#14637);+#14637 = FILL_AREA_STYLE('',(#14638));+#14638 = FILL_AREA_STYLE_COLOUR('',#14022);+#14639 = STYLED_ITEM('color',(#14640),#6426);+#14640 = PRESENTATION_STYLE_ASSIGNMENT((#14641));+#14641 = SURFACE_STYLE_USAGE(.BOTH.,#14642);+#14642 = SURFACE_SIDE_STYLE('',(#14643));+#14643 = SURFACE_STYLE_FILL_AREA(#14644);+#14644 = FILL_AREA_STYLE('',(#14645));+#14645 = FILL_AREA_STYLE_COLOUR('',#14022);+#14646 = STYLED_ITEM('color',(#14647),#6435);+#14647 = PRESENTATION_STYLE_ASSIGNMENT((#14648));+#14648 = SURFACE_STYLE_USAGE(.BOTH.,#14649);+#14649 = SURFACE_SIDE_STYLE('',(#14650));+#14650 = SURFACE_STYLE_FILL_AREA(#14651);+#14651 = FILL_AREA_STYLE('',(#14652));+#14652 = FILL_AREA_STYLE_COLOUR('',#14022);+#14653 = STYLED_ITEM('color',(#14654),#6555);+#14654 = PRESENTATION_STYLE_ASSIGNMENT((#14655));+#14655 = SURFACE_STYLE_USAGE(.BOTH.,#14656);+#14656 = SURFACE_SIDE_STYLE('',(#14657));+#14657 = SURFACE_STYLE_FILL_AREA(#14658);+#14658 = FILL_AREA_STYLE('',(#14659));+#14659 = FILL_AREA_STYLE_COLOUR('',#14022);+#14660 = STYLED_ITEM('color',(#14661),#6743);+#14661 = PRESENTATION_STYLE_ASSIGNMENT((#14662));+#14662 = SURFACE_STYLE_USAGE(.BOTH.,#14663);+#14663 = SURFACE_SIDE_STYLE('',(#14664));+#14664 = SURFACE_STYLE_FILL_AREA(#14665);+#14665 = FILL_AREA_STYLE('',(#14666));+#14666 = FILL_AREA_STYLE_COLOUR('',#14022);+#14667 = STYLED_ITEM('color',(#14668),#6814);+#14668 = PRESENTATION_STYLE_ASSIGNMENT((#14669));+#14669 = SURFACE_STYLE_USAGE(.BOTH.,#14670);+#14670 = SURFACE_SIDE_STYLE('',(#14671));+#14671 = SURFACE_STYLE_FILL_AREA(#14672);+#14672 = FILL_AREA_STYLE('',(#14673));+#14673 = FILL_AREA_STYLE_COLOUR('',#14022);+#14674 = STYLED_ITEM('color',(#14675),#6863);+#14675 = PRESENTATION_STYLE_ASSIGNMENT((#14676));+#14676 = SURFACE_STYLE_USAGE(.BOTH.,#14677);+#14677 = SURFACE_SIDE_STYLE('',(#14678));+#14678 = SURFACE_STYLE_FILL_AREA(#14679);+#14679 = FILL_AREA_STYLE('',(#14680));+#14680 = FILL_AREA_STYLE_COLOUR('',#14022);+#14681 = STYLED_ITEM('color',(#14682),#6912);+#14682 = PRESENTATION_STYLE_ASSIGNMENT((#14683));+#14683 = SURFACE_STYLE_USAGE(.BOTH.,#14684);+#14684 = SURFACE_SIDE_STYLE('',(#14685));+#14685 = SURFACE_STYLE_FILL_AREA(#14686);+#14686 = FILL_AREA_STYLE('',(#14687));+#14687 = FILL_AREA_STYLE_COLOUR('',#14022);+#14688 = STYLED_ITEM('color',(#14689),#6961);+#14689 = PRESENTATION_STYLE_ASSIGNMENT((#14690));+#14690 = SURFACE_STYLE_USAGE(.BOTH.,#14691);+#14691 = SURFACE_SIDE_STYLE('',(#14692));+#14692 = SURFACE_STYLE_FILL_AREA(#14693);+#14693 = FILL_AREA_STYLE('',(#14694));+#14694 = FILL_AREA_STYLE_COLOUR('',#14022);+#14695 = STYLED_ITEM('color',(#14696),#7010);+#14696 = PRESENTATION_STYLE_ASSIGNMENT((#14697));+#14697 = SURFACE_STYLE_USAGE(.BOTH.,#14698);+#14698 = SURFACE_SIDE_STYLE('',(#14699));+#14699 = SURFACE_STYLE_FILL_AREA(#14700);+#14700 = FILL_AREA_STYLE('',(#14701));+#14701 = FILL_AREA_STYLE_COLOUR('',#14022);+#14702 = STYLED_ITEM('color',(#14703),#7037);+#14703 = PRESENTATION_STYLE_ASSIGNMENT((#14704));+#14704 = SURFACE_STYLE_USAGE(.BOTH.,#14705);+#14705 = SURFACE_SIDE_STYLE('',(#14706));+#14706 = SURFACE_STYLE_FILL_AREA(#14707);+#14707 = FILL_AREA_STYLE('',(#14708));+#14708 = FILL_AREA_STYLE_COLOUR('',#14022);+#14709 = STYLED_ITEM('color',(#14710),#7068);+#14710 = PRESENTATION_STYLE_ASSIGNMENT((#14711));+#14711 = SURFACE_STYLE_USAGE(.BOTH.,#14712);+#14712 = SURFACE_SIDE_STYLE('',(#14713));+#14713 = SURFACE_STYLE_FILL_AREA(#14714);+#14714 = FILL_AREA_STYLE('',(#14715));+#14715 = FILL_AREA_STYLE_COLOUR('',#14022);+#14716 = STYLED_ITEM('color',(#14717),#7077);+#14717 = PRESENTATION_STYLE_ASSIGNMENT((#14718));+#14718 = SURFACE_STYLE_USAGE(.BOTH.,#14719);+#14719 = SURFACE_SIDE_STYLE('',(#14720));+#14720 = SURFACE_STYLE_FILL_AREA(#14721);+#14721 = FILL_AREA_STYLE('',(#14722));+#14722 = FILL_AREA_STYLE_COLOUR('',#14022);+#14723 = STYLED_ITEM('color',(#14724),#7197);+#14724 = PRESENTATION_STYLE_ASSIGNMENT((#14725));+#14725 = SURFACE_STYLE_USAGE(.BOTH.,#14726);+#14726 = SURFACE_SIDE_STYLE('',(#14727));+#14727 = SURFACE_STYLE_FILL_AREA(#14728);+#14728 = FILL_AREA_STYLE('',(#14729));+#14729 = FILL_AREA_STYLE_COLOUR('',#14022);+#14730 = STYLED_ITEM('color',(#14731),#7273);+#14731 = PRESENTATION_STYLE_ASSIGNMENT((#14732));+#14732 = SURFACE_STYLE_USAGE(.BOTH.,#14733);+#14733 = SURFACE_SIDE_STYLE('',(#14734));+#14734 = SURFACE_STYLE_FILL_AREA(#14735);+#14735 = FILL_AREA_STYLE('',(#14736));+#14736 = FILL_AREA_STYLE_COLOUR('',#14022);+#14737 = STYLED_ITEM('color',(#14738),#7349);+#14738 = PRESENTATION_STYLE_ASSIGNMENT((#14739));+#14739 = SURFACE_STYLE_USAGE(.BOTH.,#14740);+#14740 = SURFACE_SIDE_STYLE('',(#14741));+#14741 = SURFACE_STYLE_FILL_AREA(#14742);+#14742 = FILL_AREA_STYLE('',(#14743));+#14743 = FILL_AREA_STYLE_COLOUR('',#14022);+#14744 = STYLED_ITEM('color',(#14745),#7425);+#14745 = PRESENTATION_STYLE_ASSIGNMENT((#14746));+#14746 = SURFACE_STYLE_USAGE(.BOTH.,#14747);+#14747 = SURFACE_SIDE_STYLE('',(#14748));+#14748 = SURFACE_STYLE_FILL_AREA(#14749);+#14749 = FILL_AREA_STYLE('',(#14750));+#14750 = FILL_AREA_STYLE_COLOUR('',#14022);+#14751 = STYLED_ITEM('color',(#14752),#7501);+#14752 = PRESENTATION_STYLE_ASSIGNMENT((#14753));+#14753 = SURFACE_STYLE_USAGE(.BOTH.,#14754);+#14754 = SURFACE_SIDE_STYLE('',(#14755));+#14755 = SURFACE_STYLE_FILL_AREA(#14756);+#14756 = FILL_AREA_STYLE('',(#14757));+#14757 = FILL_AREA_STYLE_COLOUR('',#14022);+#14758 = STYLED_ITEM('color',(#14759),#7577);+#14759 = PRESENTATION_STYLE_ASSIGNMENT((#14760));+#14760 = SURFACE_STYLE_USAGE(.BOTH.,#14761);+#14761 = SURFACE_SIDE_STYLE('',(#14762));+#14762 = SURFACE_STYLE_FILL_AREA(#14763);+#14763 = FILL_AREA_STYLE('',(#14764));+#14764 = FILL_AREA_STYLE_COLOUR('',#14022);+#14765 = STYLED_ITEM('color',(#14766),#7648);+#14766 = PRESENTATION_STYLE_ASSIGNMENT((#14767));+#14767 = SURFACE_STYLE_USAGE(.BOTH.,#14768);+#14768 = SURFACE_SIDE_STYLE('',(#14769));+#14769 = SURFACE_STYLE_FILL_AREA(#14770);+#14770 = FILL_AREA_STYLE('',(#14771));+#14771 = FILL_AREA_STYLE_COLOUR('',#14022);+#14772 = STYLED_ITEM('color',(#14773),#7679);+#14773 = PRESENTATION_STYLE_ASSIGNMENT((#14774));+#14774 = SURFACE_STYLE_USAGE(.BOTH.,#14775);+#14775 = SURFACE_SIDE_STYLE('',(#14776));+#14776 = SURFACE_STYLE_FILL_AREA(#14777);+#14777 = FILL_AREA_STYLE('',(#14778));+#14778 = FILL_AREA_STYLE_COLOUR('',#14022);+#14779 = STYLED_ITEM('color',(#14780),#7706);+#14780 = PRESENTATION_STYLE_ASSIGNMENT((#14781));+#14781 = SURFACE_STYLE_USAGE(.BOTH.,#14782);+#14782 = SURFACE_SIDE_STYLE('',(#14783));+#14783 = SURFACE_STYLE_FILL_AREA(#14784);+#14784 = FILL_AREA_STYLE('',(#14785));+#14785 = FILL_AREA_STYLE_COLOUR('',#14022);+#14786 = STYLED_ITEM('color',(#14787),#7719);+#14787 = PRESENTATION_STYLE_ASSIGNMENT((#14788));+#14788 = SURFACE_STYLE_USAGE(.BOTH.,#14789);+#14789 = SURFACE_SIDE_STYLE('',(#14790));+#14790 = SURFACE_STYLE_FILL_AREA(#14791);+#14791 = FILL_AREA_STYLE('',(#14792));+#14792 = FILL_AREA_STYLE_COLOUR('',#14022);+#14793 = STYLED_ITEM('color',(#14794),#7839);+#14794 = PRESENTATION_STYLE_ASSIGNMENT((#14795));+#14795 = SURFACE_STYLE_USAGE(.BOTH.,#14796);+#14796 = SURFACE_SIDE_STYLE('',(#14797));+#14797 = SURFACE_STYLE_FILL_AREA(#14798);+#14798 = FILL_AREA_STYLE('',(#14799));+#14799 = FILL_AREA_STYLE_COLOUR('',#14022);+#14800 = STYLED_ITEM('color',(#14801),#7915);+#14801 = PRESENTATION_STYLE_ASSIGNMENT((#14802));+#14802 = SURFACE_STYLE_USAGE(.BOTH.,#14803);+#14803 = SURFACE_SIDE_STYLE('',(#14804));+#14804 = SURFACE_STYLE_FILL_AREA(#14805);+#14805 = FILL_AREA_STYLE('',(#14806));+#14806 = FILL_AREA_STYLE_COLOUR('',#14022);+#14807 = STYLED_ITEM('color',(#14808),#7991);+#14808 = PRESENTATION_STYLE_ASSIGNMENT((#14809));+#14809 = SURFACE_STYLE_USAGE(.BOTH.,#14810);+#14810 = SURFACE_SIDE_STYLE('',(#14811));+#14811 = SURFACE_STYLE_FILL_AREA(#14812);+#14812 = FILL_AREA_STYLE('',(#14813));+#14813 = FILL_AREA_STYLE_COLOUR('',#14022);+#14814 = STYLED_ITEM('color',(#14815),#8067);+#14815 = PRESENTATION_STYLE_ASSIGNMENT((#14816));+#14816 = SURFACE_STYLE_USAGE(.BOTH.,#14817);+#14817 = SURFACE_SIDE_STYLE('',(#14818));+#14818 = SURFACE_STYLE_FILL_AREA(#14819);+#14819 = FILL_AREA_STYLE('',(#14820));+#14820 = FILL_AREA_STYLE_COLOUR('',#14022);+#14821 = STYLED_ITEM('color',(#14822),#8143);+#14822 = PRESENTATION_STYLE_ASSIGNMENT((#14823));+#14823 = SURFACE_STYLE_USAGE(.BOTH.,#14824);+#14824 = SURFACE_SIDE_STYLE('',(#14825));+#14825 = SURFACE_STYLE_FILL_AREA(#14826);+#14826 = FILL_AREA_STYLE('',(#14827));+#14827 = FILL_AREA_STYLE_COLOUR('',#14022);+#14828 = STYLED_ITEM('color',(#14829),#8219);+#14829 = PRESENTATION_STYLE_ASSIGNMENT((#14830));+#14830 = SURFACE_STYLE_USAGE(.BOTH.,#14831);+#14831 = SURFACE_SIDE_STYLE('',(#14832));+#14832 = SURFACE_STYLE_FILL_AREA(#14833);+#14833 = FILL_AREA_STYLE('',(#14834));+#14834 = FILL_AREA_STYLE_COLOUR('',#14022);+#14835 = STYLED_ITEM('color',(#14836),#8290);+#14836 = PRESENTATION_STYLE_ASSIGNMENT((#14837));+#14837 = SURFACE_STYLE_USAGE(.BOTH.,#14838);+#14838 = SURFACE_SIDE_STYLE('',(#14839));+#14839 = SURFACE_STYLE_FILL_AREA(#14840);+#14840 = FILL_AREA_STYLE('',(#14841));+#14841 = FILL_AREA_STYLE_COLOUR('',#14022);+#14842 = STYLED_ITEM('color',(#14843),#8321);+#14843 = PRESENTATION_STYLE_ASSIGNMENT((#14844));+#14844 = SURFACE_STYLE_USAGE(.BOTH.,#14845);+#14845 = SURFACE_SIDE_STYLE('',(#14846));+#14846 = SURFACE_STYLE_FILL_AREA(#14847);+#14847 = FILL_AREA_STYLE('',(#14848));+#14848 = FILL_AREA_STYLE_COLOUR('',#14022);+#14849 = STYLED_ITEM('color',(#14850),#8348);+#14850 = PRESENTATION_STYLE_ASSIGNMENT((#14851));+#14851 = SURFACE_STYLE_USAGE(.BOTH.,#14852);+#14852 = SURFACE_SIDE_STYLE('',(#14853));+#14853 = SURFACE_STYLE_FILL_AREA(#14854);+#14854 = FILL_AREA_STYLE('',(#14855));+#14855 = FILL_AREA_STYLE_COLOUR('',#14022);+#14856 = STYLED_ITEM('color',(#14857),#8361);+#14857 = PRESENTATION_STYLE_ASSIGNMENT((#14858));+#14858 = SURFACE_STYLE_USAGE(.BOTH.,#14859);+#14859 = SURFACE_SIDE_STYLE('',(#14860));+#14860 = SURFACE_STYLE_FILL_AREA(#14861);+#14861 = FILL_AREA_STYLE('',(#14862));+#14862 = FILL_AREA_STYLE_COLOUR('',#14022);+#14863 = STYLED_ITEM('color',(#14864),#8481);+#14864 = PRESENTATION_STYLE_ASSIGNMENT((#14865));+#14865 = SURFACE_STYLE_USAGE(.BOTH.,#14866);+#14866 = SURFACE_SIDE_STYLE('',(#14867));+#14867 = SURFACE_STYLE_FILL_AREA(#14868);+#14868 = FILL_AREA_STYLE('',(#14869));+#14869 = FILL_AREA_STYLE_COLOUR('',#14022);+#14870 = STYLED_ITEM('color',(#14871),#8557);+#14871 = PRESENTATION_STYLE_ASSIGNMENT((#14872));+#14872 = SURFACE_STYLE_USAGE(.BOTH.,#14873);+#14873 = SURFACE_SIDE_STYLE('',(#14874));+#14874 = SURFACE_STYLE_FILL_AREA(#14875);+#14875 = FILL_AREA_STYLE('',(#14876));+#14876 = FILL_AREA_STYLE_COLOUR('',#14022);+#14877 = STYLED_ITEM('color',(#14878),#8633);+#14878 = PRESENTATION_STYLE_ASSIGNMENT((#14879));+#14879 = SURFACE_STYLE_USAGE(.BOTH.,#14880);+#14880 = SURFACE_SIDE_STYLE('',(#14881));+#14881 = SURFACE_STYLE_FILL_AREA(#14882);+#14882 = FILL_AREA_STYLE('',(#14883));+#14883 = FILL_AREA_STYLE_COLOUR('',#14022);+#14884 = STYLED_ITEM('color',(#14885),#8709);+#14885 = PRESENTATION_STYLE_ASSIGNMENT((#14886));+#14886 = SURFACE_STYLE_USAGE(.BOTH.,#14887);+#14887 = SURFACE_SIDE_STYLE('',(#14888));+#14888 = SURFACE_STYLE_FILL_AREA(#14889);+#14889 = FILL_AREA_STYLE('',(#14890));+#14890 = FILL_AREA_STYLE_COLOUR('',#14022);+#14891 = STYLED_ITEM('color',(#14892),#8785);+#14892 = PRESENTATION_STYLE_ASSIGNMENT((#14893));+#14893 = SURFACE_STYLE_USAGE(.BOTH.,#14894);+#14894 = SURFACE_SIDE_STYLE('',(#14895));+#14895 = SURFACE_STYLE_FILL_AREA(#14896);+#14896 = FILL_AREA_STYLE('',(#14897));+#14897 = FILL_AREA_STYLE_COLOUR('',#14022);+#14898 = STYLED_ITEM('color',(#14899),#8861);+#14899 = PRESENTATION_STYLE_ASSIGNMENT((#14900));+#14900 = SURFACE_STYLE_USAGE(.BOTH.,#14901);+#14901 = SURFACE_SIDE_STYLE('',(#14902));+#14902 = SURFACE_STYLE_FILL_AREA(#14903);+#14903 = FILL_AREA_STYLE('',(#14904));+#14904 = FILL_AREA_STYLE_COLOUR('',#14022);+#14905 = STYLED_ITEM('color',(#14906),#8932);+#14906 = PRESENTATION_STYLE_ASSIGNMENT((#14907));+#14907 = SURFACE_STYLE_USAGE(.BOTH.,#14908);+#14908 = SURFACE_SIDE_STYLE('',(#14909));+#14909 = SURFACE_STYLE_FILL_AREA(#14910);+#14910 = FILL_AREA_STYLE('',(#14911));+#14911 = FILL_AREA_STYLE_COLOUR('',#14022);+#14912 = STYLED_ITEM('color',(#14913),#8963);+#14913 = PRESENTATION_STYLE_ASSIGNMENT((#14914));+#14914 = SURFACE_STYLE_USAGE(.BOTH.,#14915);+#14915 = SURFACE_SIDE_STYLE('',(#14916));+#14916 = SURFACE_STYLE_FILL_AREA(#14917);+#14917 = FILL_AREA_STYLE('',(#14918));+#14918 = FILL_AREA_STYLE_COLOUR('',#14022);+#14919 = STYLED_ITEM('color',(#14920),#8990);+#14920 = PRESENTATION_STYLE_ASSIGNMENT((#14921));+#14921 = SURFACE_STYLE_USAGE(.BOTH.,#14922);+#14922 = SURFACE_SIDE_STYLE('',(#14923));+#14923 = SURFACE_STYLE_FILL_AREA(#14924);+#14924 = FILL_AREA_STYLE('',(#14925));+#14925 = FILL_AREA_STYLE_COLOUR('',#14022);+#14926 = STYLED_ITEM('color',(#14927),#9003);+#14927 = PRESENTATION_STYLE_ASSIGNMENT((#14928));+#14928 = SURFACE_STYLE_USAGE(.BOTH.,#14929);+#14929 = SURFACE_SIDE_STYLE('',(#14930));+#14930 = SURFACE_STYLE_FILL_AREA(#14931);+#14931 = FILL_AREA_STYLE('',(#14932));+#14932 = FILL_AREA_STYLE_COLOUR('',#14022);+#14933 = STYLED_ITEM('color',(#14934),#9123);+#14934 = PRESENTATION_STYLE_ASSIGNMENT((#14935));+#14935 = SURFACE_STYLE_USAGE(.BOTH.,#14936);+#14936 = SURFACE_SIDE_STYLE('',(#14937));+#14937 = SURFACE_STYLE_FILL_AREA(#14938);+#14938 = FILL_AREA_STYLE('',(#14939));+#14939 = FILL_AREA_STYLE_COLOUR('',#14022);+#14940 = STYLED_ITEM('color',(#14941),#9199);+#14941 = PRESENTATION_STYLE_ASSIGNMENT((#14942));+#14942 = SURFACE_STYLE_USAGE(.BOTH.,#14943);+#14943 = SURFACE_SIDE_STYLE('',(#14944));+#14944 = SURFACE_STYLE_FILL_AREA(#14945);+#14945 = FILL_AREA_STYLE('',(#14946));+#14946 = FILL_AREA_STYLE_COLOUR('',#14022);+#14947 = STYLED_ITEM('color',(#14948),#9275);+#14948 = PRESENTATION_STYLE_ASSIGNMENT((#14949));+#14949 = SURFACE_STYLE_USAGE(.BOTH.,#14950);+#14950 = SURFACE_SIDE_STYLE('',(#14951));+#14951 = SURFACE_STYLE_FILL_AREA(#14952);+#14952 = FILL_AREA_STYLE('',(#14953));+#14953 = FILL_AREA_STYLE_COLOUR('',#14022);+#14954 = STYLED_ITEM('color',(#14955),#9351);+#14955 = PRESENTATION_STYLE_ASSIGNMENT((#14956));+#14956 = SURFACE_STYLE_USAGE(.BOTH.,#14957);+#14957 = SURFACE_SIDE_STYLE('',(#14958));+#14958 = SURFACE_STYLE_FILL_AREA(#14959);+#14959 = FILL_AREA_STYLE('',(#14960));+#14960 = FILL_AREA_STYLE_COLOUR('',#14022);+#14961 = STYLED_ITEM('color',(#14962),#9427);+#14962 = PRESENTATION_STYLE_ASSIGNMENT((#14963));+#14963 = SURFACE_STYLE_USAGE(.BOTH.,#14964);+#14964 = SURFACE_SIDE_STYLE('',(#14965));+#14965 = SURFACE_STYLE_FILL_AREA(#14966);+#14966 = FILL_AREA_STYLE('',(#14967));+#14967 = FILL_AREA_STYLE_COLOUR('',#14022);+#14968 = STYLED_ITEM('color',(#14969),#9503);+#14969 = PRESENTATION_STYLE_ASSIGNMENT((#14970));+#14970 = SURFACE_STYLE_USAGE(.BOTH.,#14971);+#14971 = SURFACE_SIDE_STYLE('',(#14972));+#14972 = SURFACE_STYLE_FILL_AREA(#14973);+#14973 = FILL_AREA_STYLE('',(#14974));+#14974 = FILL_AREA_STYLE_COLOUR('',#14022);+#14975 = STYLED_ITEM('color',(#14976),#9574);+#14976 = PRESENTATION_STYLE_ASSIGNMENT((#14977));+#14977 = SURFACE_STYLE_USAGE(.BOTH.,#14978);+#14978 = SURFACE_SIDE_STYLE('',(#14979));+#14979 = SURFACE_STYLE_FILL_AREA(#14980);+#14980 = FILL_AREA_STYLE('',(#14981));+#14981 = FILL_AREA_STYLE_COLOUR('',#14022);+#14982 = STYLED_ITEM('color',(#14983),#9605);+#14983 = PRESENTATION_STYLE_ASSIGNMENT((#14984));+#14984 = SURFACE_STYLE_USAGE(.BOTH.,#14985);+#14985 = SURFACE_SIDE_STYLE('',(#14986));+#14986 = SURFACE_STYLE_FILL_AREA(#14987);+#14987 = FILL_AREA_STYLE('',(#14988));+#14988 = FILL_AREA_STYLE_COLOUR('',#14022);+#14989 = STYLED_ITEM('color',(#14990),#9632);+#14990 = PRESENTATION_STYLE_ASSIGNMENT((#14991));+#14991 = SURFACE_STYLE_USAGE(.BOTH.,#14992);+#14992 = SURFACE_SIDE_STYLE('',(#14993));+#14993 = SURFACE_STYLE_FILL_AREA(#14994);+#14994 = FILL_AREA_STYLE('',(#14995));+#14995 = FILL_AREA_STYLE_COLOUR('',#14022);+#14996 = STYLED_ITEM('color',(#14997),#9645);+#14997 = PRESENTATION_STYLE_ASSIGNMENT((#14998));+#14998 = SURFACE_STYLE_USAGE(.BOTH.,#14999);+#14999 = SURFACE_SIDE_STYLE('',(#15000));+#15000 = SURFACE_STYLE_FILL_AREA(#15001);+#15001 = FILL_AREA_STYLE('',(#15002));+#15002 = FILL_AREA_STYLE_COLOUR('',#14022);+#15003 = STYLED_ITEM('color',(#15004),#9765);+#15004 = PRESENTATION_STYLE_ASSIGNMENT((#15005));+#15005 = SURFACE_STYLE_USAGE(.BOTH.,#15006);+#15006 = SURFACE_SIDE_STYLE('',(#15007));+#15007 = SURFACE_STYLE_FILL_AREA(#15008);+#15008 = FILL_AREA_STYLE('',(#15009));+#15009 = FILL_AREA_STYLE_COLOUR('',#14022);+#15010 = STYLED_ITEM('color',(#15011),#9841);+#15011 = PRESENTATION_STYLE_ASSIGNMENT((#15012));+#15012 = SURFACE_STYLE_USAGE(.BOTH.,#15013);+#15013 = SURFACE_SIDE_STYLE('',(#15014));+#15014 = SURFACE_STYLE_FILL_AREA(#15015);+#15015 = FILL_AREA_STYLE('',(#15016));+#15016 = FILL_AREA_STYLE_COLOUR('',#14022);+#15017 = STYLED_ITEM('color',(#15018),#9917);+#15018 = PRESENTATION_STYLE_ASSIGNMENT((#15019));+#15019 = SURFACE_STYLE_USAGE(.BOTH.,#15020);+#15020 = SURFACE_SIDE_STYLE('',(#15021));+#15021 = SURFACE_STYLE_FILL_AREA(#15022);+#15022 = FILL_AREA_STYLE('',(#15023));+#15023 = FILL_AREA_STYLE_COLOUR('',#14022);+#15024 = STYLED_ITEM('color',(#15025),#9993);+#15025 = PRESENTATION_STYLE_ASSIGNMENT((#15026));+#15026 = SURFACE_STYLE_USAGE(.BOTH.,#15027);+#15027 = SURFACE_SIDE_STYLE('',(#15028));+#15028 = SURFACE_STYLE_FILL_AREA(#15029);+#15029 = FILL_AREA_STYLE('',(#15030));+#15030 = FILL_AREA_STYLE_COLOUR('',#14022);+#15031 = STYLED_ITEM('color',(#15032),#10069);+#15032 = PRESENTATION_STYLE_ASSIGNMENT((#15033));+#15033 = SURFACE_STYLE_USAGE(.BOTH.,#15034);+#15034 = SURFACE_SIDE_STYLE('',(#15035));+#15035 = SURFACE_STYLE_FILL_AREA(#15036);+#15036 = FILL_AREA_STYLE('',(#15037));+#15037 = FILL_AREA_STYLE_COLOUR('',#14022);+#15038 = STYLED_ITEM('color',(#15039),#10145);+#15039 = PRESENTATION_STYLE_ASSIGNMENT((#15040));+#15040 = SURFACE_STYLE_USAGE(.BOTH.,#15041);+#15041 = SURFACE_SIDE_STYLE('',(#15042));+#15042 = SURFACE_STYLE_FILL_AREA(#15043);+#15043 = FILL_AREA_STYLE('',(#15044));+#15044 = FILL_AREA_STYLE_COLOUR('',#14022);+#15045 = STYLED_ITEM('color',(#15046),#10216);+#15046 = PRESENTATION_STYLE_ASSIGNMENT((#15047));+#15047 = SURFACE_STYLE_USAGE(.BOTH.,#15048);+#15048 = SURFACE_SIDE_STYLE('',(#15049));+#15049 = SURFACE_STYLE_FILL_AREA(#15050);+#15050 = FILL_AREA_STYLE('',(#15051));+#15051 = FILL_AREA_STYLE_COLOUR('',#14022);+#15052 = STYLED_ITEM('color',(#15053),#10247);+#15053 = PRESENTATION_STYLE_ASSIGNMENT((#15054));+#15054 = SURFACE_STYLE_USAGE(.BOTH.,#15055);+#15055 = SURFACE_SIDE_STYLE('',(#15056));+#15056 = SURFACE_STYLE_FILL_AREA(#15057);+#15057 = FILL_AREA_STYLE('',(#15058));+#15058 = FILL_AREA_STYLE_COLOUR('',#14022);+#15059 = STYLED_ITEM('color',(#15060),#10274);+#15060 = PRESENTATION_STYLE_ASSIGNMENT((#15061));+#15061 = SURFACE_STYLE_USAGE(.BOTH.,#15062);+#15062 = SURFACE_SIDE_STYLE('',(#15063));+#15063 = SURFACE_STYLE_FILL_AREA(#15064);+#15064 = FILL_AREA_STYLE('',(#15065));+#15065 = FILL_AREA_STYLE_COLOUR('',#14022);+#15066 = STYLED_ITEM('color',(#15067),#10287);+#15067 = PRESENTATION_STYLE_ASSIGNMENT((#15068));+#15068 = SURFACE_STYLE_USAGE(.BOTH.,#15069);+#15069 = SURFACE_SIDE_STYLE('',(#15070));+#15070 = SURFACE_STYLE_FILL_AREA(#15071);+#15071 = FILL_AREA_STYLE('',(#15072));+#15072 = FILL_AREA_STYLE_COLOUR('',#14022);+#15073 = STYLED_ITEM('color',(#15074),#10407);+#15074 = PRESENTATION_STYLE_ASSIGNMENT((#15075));+#15075 = SURFACE_STYLE_USAGE(.BOTH.,#15076);+#15076 = SURFACE_SIDE_STYLE('',(#15077));+#15077 = SURFACE_STYLE_FILL_AREA(#15078);+#15078 = FILL_AREA_STYLE('',(#15079));+#15079 = FILL_AREA_STYLE_COLOUR('',#14022);+#15080 = STYLED_ITEM('color',(#15081),#10483);+#15081 = PRESENTATION_STYLE_ASSIGNMENT((#15082));+#15082 = SURFACE_STYLE_USAGE(.BOTH.,#15083);+#15083 = SURFACE_SIDE_STYLE('',(#15084));+#15084 = SURFACE_STYLE_FILL_AREA(#15085);+#15085 = FILL_AREA_STYLE('',(#15086));+#15086 = FILL_AREA_STYLE_COLOUR('',#14022);+#15087 = STYLED_ITEM('color',(#15088),#10559);+#15088 = PRESENTATION_STYLE_ASSIGNMENT((#15089));+#15089 = SURFACE_STYLE_USAGE(.BOTH.,#15090);+#15090 = SURFACE_SIDE_STYLE('',(#15091));+#15091 = SURFACE_STYLE_FILL_AREA(#15092);+#15092 = FILL_AREA_STYLE('',(#15093));+#15093 = FILL_AREA_STYLE_COLOUR('',#14022);+#15094 = STYLED_ITEM('color',(#15095),#10635);+#15095 = PRESENTATION_STYLE_ASSIGNMENT((#15096));+#15096 = SURFACE_STYLE_USAGE(.BOTH.,#15097);+#15097 = SURFACE_SIDE_STYLE('',(#15098));+#15098 = SURFACE_STYLE_FILL_AREA(#15099);+#15099 = FILL_AREA_STYLE('',(#15100));+#15100 = FILL_AREA_STYLE_COLOUR('',#14022);+#15101 = STYLED_ITEM('color',(#15102),#10711);+#15102 = PRESENTATION_STYLE_ASSIGNMENT((#15103));+#15103 = SURFACE_STYLE_USAGE(.BOTH.,#15104);+#15104 = SURFACE_SIDE_STYLE('',(#15105));+#15105 = SURFACE_STYLE_FILL_AREA(#15106);+#15106 = FILL_AREA_STYLE('',(#15107));+#15107 = FILL_AREA_STYLE_COLOUR('',#14022);+#15108 = STYLED_ITEM('color',(#15109),#10787);+#15109 = PRESENTATION_STYLE_ASSIGNMENT((#15110));+#15110 = SURFACE_STYLE_USAGE(.BOTH.,#15111);+#15111 = SURFACE_SIDE_STYLE('',(#15112));+#15112 = SURFACE_STYLE_FILL_AREA(#15113);+#15113 = FILL_AREA_STYLE('',(#15114));+#15114 = FILL_AREA_STYLE_COLOUR('',#14022);+#15115 = STYLED_ITEM('color',(#15116),#10858);+#15116 = PRESENTATION_STYLE_ASSIGNMENT((#15117));+#15117 = SURFACE_STYLE_USAGE(.BOTH.,#15118);+#15118 = SURFACE_SIDE_STYLE('',(#15119));+#15119 = SURFACE_STYLE_FILL_AREA(#15120);+#15120 = FILL_AREA_STYLE('',(#15121));+#15121 = FILL_AREA_STYLE_COLOUR('',#14022);+#15122 = STYLED_ITEM('color',(#15123),#10889);+#15123 = PRESENTATION_STYLE_ASSIGNMENT((#15124));+#15124 = SURFACE_STYLE_USAGE(.BOTH.,#15125);+#15125 = SURFACE_SIDE_STYLE('',(#15126));+#15126 = SURFACE_STYLE_FILL_AREA(#15127);+#15127 = FILL_AREA_STYLE('',(#15128));+#15128 = FILL_AREA_STYLE_COLOUR('',#14022);+#15129 = STYLED_ITEM('color',(#15130),#10916);+#15130 = PRESENTATION_STYLE_ASSIGNMENT((#15131));+#15131 = SURFACE_STYLE_USAGE(.BOTH.,#15132);+#15132 = SURFACE_SIDE_STYLE('',(#15133));+#15133 = SURFACE_STYLE_FILL_AREA(#15134);+#15134 = FILL_AREA_STYLE('',(#15135));+#15135 = FILL_AREA_STYLE_COLOUR('',#14022);+#15136 = STYLED_ITEM('color',(#15137),#10929);+#15137 = PRESENTATION_STYLE_ASSIGNMENT((#15138));+#15138 = SURFACE_STYLE_USAGE(.BOTH.,#15139);+#15139 = SURFACE_SIDE_STYLE('',(#15140));+#15140 = SURFACE_STYLE_FILL_AREA(#15141);+#15141 = FILL_AREA_STYLE('',(#15142));+#15142 = FILL_AREA_STYLE_COLOUR('',#14022);+#15143 = STYLED_ITEM('color',(#15144),#11049);+#15144 = PRESENTATION_STYLE_ASSIGNMENT((#15145));+#15145 = SURFACE_STYLE_USAGE(.BOTH.,#15146);+#15146 = SURFACE_SIDE_STYLE('',(#15147));+#15147 = SURFACE_STYLE_FILL_AREA(#15148);+#15148 = FILL_AREA_STYLE('',(#15149));+#15149 = FILL_AREA_STYLE_COLOUR('',#14022);+#15150 = STYLED_ITEM('color',(#15151),#11125);+#15151 = PRESENTATION_STYLE_ASSIGNMENT((#15152));+#15152 = SURFACE_STYLE_USAGE(.BOTH.,#15153);+#15153 = SURFACE_SIDE_STYLE('',(#15154));+#15154 = SURFACE_STYLE_FILL_AREA(#15155);+#15155 = FILL_AREA_STYLE('',(#15156));+#15156 = FILL_AREA_STYLE_COLOUR('',#14022);+#15157 = STYLED_ITEM('color',(#15158),#11201);+#15158 = PRESENTATION_STYLE_ASSIGNMENT((#15159));+#15159 = SURFACE_STYLE_USAGE(.BOTH.,#15160);+#15160 = SURFACE_SIDE_STYLE('',(#15161));+#15161 = SURFACE_STYLE_FILL_AREA(#15162);+#15162 = FILL_AREA_STYLE('',(#15163));+#15163 = FILL_AREA_STYLE_COLOUR('',#14022);+#15164 = STYLED_ITEM('color',(#15165),#11277);+#15165 = PRESENTATION_STYLE_ASSIGNMENT((#15166));+#15166 = SURFACE_STYLE_USAGE(.BOTH.,#15167);+#15167 = SURFACE_SIDE_STYLE('',(#15168));+#15168 = SURFACE_STYLE_FILL_AREA(#15169);+#15169 = FILL_AREA_STYLE('',(#15170));+#15170 = FILL_AREA_STYLE_COLOUR('',#14022);+#15171 = STYLED_ITEM('color',(#15172),#11353);+#15172 = PRESENTATION_STYLE_ASSIGNMENT((#15173));+#15173 = SURFACE_STYLE_USAGE(.BOTH.,#15174);+#15174 = SURFACE_SIDE_STYLE('',(#15175));+#15175 = SURFACE_STYLE_FILL_AREA(#15176);+#15176 = FILL_AREA_STYLE('',(#15177));+#15177 = FILL_AREA_STYLE_COLOUR('',#14022);+#15178 = STYLED_ITEM('color',(#15179),#11429);+#15179 = PRESENTATION_STYLE_ASSIGNMENT((#15180));+#15180 = SURFACE_STYLE_USAGE(.BOTH.,#15181);+#15181 = SURFACE_SIDE_STYLE('',(#15182));+#15182 = SURFACE_STYLE_FILL_AREA(#15183);+#15183 = FILL_AREA_STYLE('',(#15184));+#15184 = FILL_AREA_STYLE_COLOUR('',#14022);+#15185 = STYLED_ITEM('color',(#15186),#11500);+#15186 = PRESENTATION_STYLE_ASSIGNMENT((#15187));+#15187 = SURFACE_STYLE_USAGE(.BOTH.,#15188);+#15188 = SURFACE_SIDE_STYLE('',(#15189));+#15189 = SURFACE_STYLE_FILL_AREA(#15190);+#15190 = FILL_AREA_STYLE('',(#15191));+#15191 = FILL_AREA_STYLE_COLOUR('',#14022);+#15192 = STYLED_ITEM('color',(#15193),#11531);+#15193 = PRESENTATION_STYLE_ASSIGNMENT((#15194));+#15194 = SURFACE_STYLE_USAGE(.BOTH.,#15195);+#15195 = SURFACE_SIDE_STYLE('',(#15196));+#15196 = SURFACE_STYLE_FILL_AREA(#15197);+#15197 = FILL_AREA_STYLE('',(#15198));+#15198 = FILL_AREA_STYLE_COLOUR('',#14022);+#15199 = STYLED_ITEM('color',(#15200),#11558);+#15200 = PRESENTATION_STYLE_ASSIGNMENT((#15201));+#15201 = SURFACE_STYLE_USAGE(.BOTH.,#15202);+#15202 = SURFACE_SIDE_STYLE('',(#15203));+#15203 = SURFACE_STYLE_FILL_AREA(#15204);+#15204 = FILL_AREA_STYLE('',(#15205));+#15205 = FILL_AREA_STYLE_COLOUR('',#14022);+#15206 = STYLED_ITEM('color',(#15207),#11571);+#15207 = PRESENTATION_STYLE_ASSIGNMENT((#15208));+#15208 = SURFACE_STYLE_USAGE(.BOTH.,#15209);+#15209 = SURFACE_SIDE_STYLE('',(#15210));+#15210 = SURFACE_STYLE_FILL_AREA(#15211);+#15211 = FILL_AREA_STYLE('',(#15212));+#15212 = FILL_AREA_STYLE_COLOUR('',#14022);+#15213 = STYLED_ITEM('color',(#15214),#11691);+#15214 = PRESENTATION_STYLE_ASSIGNMENT((#15215));+#15215 = SURFACE_STYLE_USAGE(.BOTH.,#15216);+#15216 = SURFACE_SIDE_STYLE('',(#15217));+#15217 = SURFACE_STYLE_FILL_AREA(#15218);+#15218 = FILL_AREA_STYLE('',(#15219));+#15219 = FILL_AREA_STYLE_COLOUR('',#14022);+#15220 = STYLED_ITEM('color',(#15221),#11767);+#15221 = PRESENTATION_STYLE_ASSIGNMENT((#15222));+#15222 = SURFACE_STYLE_USAGE(.BOTH.,#15223);+#15223 = SURFACE_SIDE_STYLE('',(#15224));+#15224 = SURFACE_STYLE_FILL_AREA(#15225);+#15225 = FILL_AREA_STYLE('',(#15226));+#15226 = FILL_AREA_STYLE_COLOUR('',#14022);+#15227 = STYLED_ITEM('color',(#15228),#11843);+#15228 = PRESENTATION_STYLE_ASSIGNMENT((#15229));+#15229 = SURFACE_STYLE_USAGE(.BOTH.,#15230);+#15230 = SURFACE_SIDE_STYLE('',(#15231));+#15231 = SURFACE_STYLE_FILL_AREA(#15232);+#15232 = FILL_AREA_STYLE('',(#15233));+#15233 = FILL_AREA_STYLE_COLOUR('',#14022);+#15234 = STYLED_ITEM('color',(#15235),#11919);+#15235 = PRESENTATION_STYLE_ASSIGNMENT((#15236));+#15236 = SURFACE_STYLE_USAGE(.BOTH.,#15237);+#15237 = SURFACE_SIDE_STYLE('',(#15238));+#15238 = SURFACE_STYLE_FILL_AREA(#15239);+#15239 = FILL_AREA_STYLE('',(#15240));+#15240 = FILL_AREA_STYLE_COLOUR('',#14022);+#15241 = STYLED_ITEM('color',(#15242),#11995);+#15242 = PRESENTATION_STYLE_ASSIGNMENT((#15243));+#15243 = SURFACE_STYLE_USAGE(.BOTH.,#15244);+#15244 = SURFACE_SIDE_STYLE('',(#15245));+#15245 = SURFACE_STYLE_FILL_AREA(#15246);+#15246 = FILL_AREA_STYLE('',(#15247));+#15247 = FILL_AREA_STYLE_COLOUR('',#14022);+#15248 = STYLED_ITEM('color',(#15249),#12071);+#15249 = PRESENTATION_STYLE_ASSIGNMENT((#15250));+#15250 = SURFACE_STYLE_USAGE(.BOTH.,#15251);+#15251 = SURFACE_SIDE_STYLE('',(#15252));+#15252 = SURFACE_STYLE_FILL_AREA(#15253);+#15253 = FILL_AREA_STYLE('',(#15254));+#15254 = FILL_AREA_STYLE_COLOUR('',#14022);+#15255 = STYLED_ITEM('color',(#15256),#12142);+#15256 = PRESENTATION_STYLE_ASSIGNMENT((#15257));+#15257 = SURFACE_STYLE_USAGE(.BOTH.,#15258);+#15258 = SURFACE_SIDE_STYLE('',(#15259));+#15259 = SURFACE_STYLE_FILL_AREA(#15260);+#15260 = FILL_AREA_STYLE('',(#15261));+#15261 = FILL_AREA_STYLE_COLOUR('',#14022);+#15262 = STYLED_ITEM('color',(#15263),#12173);+#15263 = PRESENTATION_STYLE_ASSIGNMENT((#15264));+#15264 = SURFACE_STYLE_USAGE(.BOTH.,#15265);+#15265 = SURFACE_SIDE_STYLE('',(#15266));+#15266 = SURFACE_STYLE_FILL_AREA(#15267);+#15267 = FILL_AREA_STYLE('',(#15268));+#15268 = FILL_AREA_STYLE_COLOUR('',#14022);+#15269 = STYLED_ITEM('color',(#15270),#12200);+#15270 = PRESENTATION_STYLE_ASSIGNMENT((#15271));+#15271 = SURFACE_STYLE_USAGE(.BOTH.,#15272);+#15272 = SURFACE_SIDE_STYLE('',(#15273));+#15273 = SURFACE_STYLE_FILL_AREA(#15274);+#15274 = FILL_AREA_STYLE('',(#15275));+#15275 = FILL_AREA_STYLE_COLOUR('',#14022);+#15276 = STYLED_ITEM('color',(#15277),#12213);+#15277 = PRESENTATION_STYLE_ASSIGNMENT((#15278));+#15278 = SURFACE_STYLE_USAGE(.BOTH.,#15279);+#15279 = SURFACE_SIDE_STYLE('',(#15280));+#15280 = SURFACE_STYLE_FILL_AREA(#15281);+#15281 = FILL_AREA_STYLE('',(#15282));+#15282 = FILL_AREA_STYLE_COLOUR('',#14022);+#15283 = STYLED_ITEM('color',(#15284),#12333);+#15284 = PRESENTATION_STYLE_ASSIGNMENT((#15285));+#15285 = SURFACE_STYLE_USAGE(.BOTH.,#15286);+#15286 = SURFACE_SIDE_STYLE('',(#15287));+#15287 = SURFACE_STYLE_FILL_AREA(#15288);+#15288 = FILL_AREA_STYLE('',(#15289));+#15289 = FILL_AREA_STYLE_COLOUR('',#14022);+#15290 = STYLED_ITEM('color',(#15291),#12409);+#15291 = PRESENTATION_STYLE_ASSIGNMENT((#15292));+#15292 = SURFACE_STYLE_USAGE(.BOTH.,#15293);+#15293 = SURFACE_SIDE_STYLE('',(#15294));+#15294 = SURFACE_STYLE_FILL_AREA(#15295);+#15295 = FILL_AREA_STYLE('',(#15296));+#15296 = FILL_AREA_STYLE_COLOUR('',#14022);+#15297 = STYLED_ITEM('color',(#15298),#12485);+#15298 = PRESENTATION_STYLE_ASSIGNMENT((#15299));+#15299 = SURFACE_STYLE_USAGE(.BOTH.,#15300);+#15300 = SURFACE_SIDE_STYLE('',(#15301));+#15301 = SURFACE_STYLE_FILL_AREA(#15302);+#15302 = FILL_AREA_STYLE('',(#15303));+#15303 = FILL_AREA_STYLE_COLOUR('',#14022);+#15304 = STYLED_ITEM('color',(#15305),#12561);+#15305 = PRESENTATION_STYLE_ASSIGNMENT((#15306));+#15306 = SURFACE_STYLE_USAGE(.BOTH.,#15307);+#15307 = SURFACE_SIDE_STYLE('',(#15308));+#15308 = SURFACE_STYLE_FILL_AREA(#15309);+#15309 = FILL_AREA_STYLE('',(#15310));+#15310 = FILL_AREA_STYLE_COLOUR('',#14022);+#15311 = STYLED_ITEM('color',(#15312),#12637);+#15312 = PRESENTATION_STYLE_ASSIGNMENT((#15313));+#15313 = SURFACE_STYLE_USAGE(.BOTH.,#15314);+#15314 = SURFACE_SIDE_STYLE('',(#15315));+#15315 = SURFACE_STYLE_FILL_AREA(#15316);+#15316 = FILL_AREA_STYLE('',(#15317));+#15317 = FILL_AREA_STYLE_COLOUR('',#14022);+#15318 = STYLED_ITEM('color',(#15319),#12713);+#15319 = PRESENTATION_STYLE_ASSIGNMENT((#15320));+#15320 = SURFACE_STYLE_USAGE(.BOTH.,#15321);+#15321 = SURFACE_SIDE_STYLE('',(#15322));+#15322 = SURFACE_STYLE_FILL_AREA(#15323);+#15323 = FILL_AREA_STYLE('',(#15324));+#15324 = FILL_AREA_STYLE_COLOUR('',#14022);+#15325 = STYLED_ITEM('color',(#15326),#12784);+#15326 = PRESENTATION_STYLE_ASSIGNMENT((#15327));+#15327 = SURFACE_STYLE_USAGE(.BOTH.,#15328);+#15328 = SURFACE_SIDE_STYLE('',(#15329));+#15329 = SURFACE_STYLE_FILL_AREA(#15330);+#15330 = FILL_AREA_STYLE('',(#15331));+#15331 = FILL_AREA_STYLE_COLOUR('',#14022);+#15332 = STYLED_ITEM('color',(#15333),#12815);+#15333 = PRESENTATION_STYLE_ASSIGNMENT((#15334));+#15334 = SURFACE_STYLE_USAGE(.BOTH.,#15335);+#15335 = SURFACE_SIDE_STYLE('',(#15336));+#15336 = SURFACE_STYLE_FILL_AREA(#15337);+#15337 = FILL_AREA_STYLE('',(#15338));+#15338 = FILL_AREA_STYLE_COLOUR('',#14022);+#15339 = STYLED_ITEM('color',(#15340),#12842);+#15340 = PRESENTATION_STYLE_ASSIGNMENT((#15341));+#15341 = SURFACE_STYLE_USAGE(.BOTH.,#15342);+#15342 = SURFACE_SIDE_STYLE('',(#15343));+#15343 = SURFACE_STYLE_FILL_AREA(#15344);+#15344 = FILL_AREA_STYLE('',(#15345));+#15345 = FILL_AREA_STYLE_COLOUR('',#14022);+#15346 = STYLED_ITEM('color',(#15347),#12855);+#15347 = PRESENTATION_STYLE_ASSIGNMENT((#15348));+#15348 = SURFACE_STYLE_USAGE(.BOTH.,#15349);+#15349 = SURFACE_SIDE_STYLE('',(#15350));+#15350 = SURFACE_STYLE_FILL_AREA(#15351);+#15351 = FILL_AREA_STYLE('',(#15352));+#15352 = FILL_AREA_STYLE_COLOUR('',#14022);+#15353 = STYLED_ITEM('color',(#15354),#12975);+#15354 = PRESENTATION_STYLE_ASSIGNMENT((#15355));+#15355 = SURFACE_STYLE_USAGE(.BOTH.,#15356);+#15356 = SURFACE_SIDE_STYLE('',(#15357));+#15357 = SURFACE_STYLE_FILL_AREA(#15358);+#15358 = FILL_AREA_STYLE('',(#15359));+#15359 = FILL_AREA_STYLE_COLOUR('',#14022);+#15360 = STYLED_ITEM('color',(#15361),#13051);+#15361 = PRESENTATION_STYLE_ASSIGNMENT((#15362));+#15362 = SURFACE_STYLE_USAGE(.BOTH.,#15363);+#15363 = SURFACE_SIDE_STYLE('',(#15364));+#15364 = SURFACE_STYLE_FILL_AREA(#15365);+#15365 = FILL_AREA_STYLE('',(#15366));+#15366 = FILL_AREA_STYLE_COLOUR('',#14022);+#15367 = STYLED_ITEM('color',(#15368),#13127);+#15368 = PRESENTATION_STYLE_ASSIGNMENT((#15369));+#15369 = SURFACE_STYLE_USAGE(.BOTH.,#15370);+#15370 = SURFACE_SIDE_STYLE('',(#15371));+#15371 = SURFACE_STYLE_FILL_AREA(#15372);+#15372 = FILL_AREA_STYLE('',(#15373));+#15373 = FILL_AREA_STYLE_COLOUR('',#14022);+#15374 = STYLED_ITEM('color',(#15375),#13203);+#15375 = PRESENTATION_STYLE_ASSIGNMENT((#15376));+#15376 = SURFACE_STYLE_USAGE(.BOTH.,#15377);+#15377 = SURFACE_SIDE_STYLE('',(#15378));+#15378 = SURFACE_STYLE_FILL_AREA(#15379);+#15379 = FILL_AREA_STYLE('',(#15380));+#15380 = FILL_AREA_STYLE_COLOUR('',#14022);+#15381 = STYLED_ITEM('color',(#15382),#13279);+#15382 = PRESENTATION_STYLE_ASSIGNMENT((#15383));+#15383 = SURFACE_STYLE_USAGE(.BOTH.,#15384);+#15384 = SURFACE_SIDE_STYLE('',(#15385));+#15385 = SURFACE_STYLE_FILL_AREA(#15386);+#15386 = FILL_AREA_STYLE('',(#15387));+#15387 = FILL_AREA_STYLE_COLOUR('',#14022);+#15388 = STYLED_ITEM('color',(#15389),#13355);+#15389 = PRESENTATION_STYLE_ASSIGNMENT((#15390));+#15390 = SURFACE_STYLE_USAGE(.BOTH.,#15391);+#15391 = SURFACE_SIDE_STYLE('',(#15392));+#15392 = SURFACE_STYLE_FILL_AREA(#15393);+#15393 = FILL_AREA_STYLE('',(#15394));+#15394 = FILL_AREA_STYLE_COLOUR('',#14022);+#15395 = STYLED_ITEM('color',(#15396),#13426);+#15396 = PRESENTATION_STYLE_ASSIGNMENT((#15397));+#15397 = SURFACE_STYLE_USAGE(.BOTH.,#15398);+#15398 = SURFACE_SIDE_STYLE('',(#15399));+#15399 = SURFACE_STYLE_FILL_AREA(#15400);+#15400 = FILL_AREA_STYLE('',(#15401));+#15401 = FILL_AREA_STYLE_COLOUR('',#14022);+#15402 = STYLED_ITEM('color',(#15403),#13457);+#15403 = PRESENTATION_STYLE_ASSIGNMENT((#15404));+#15404 = SURFACE_STYLE_USAGE(.BOTH.,#15405);+#15405 = SURFACE_SIDE_STYLE('',(#15406));+#15406 = SURFACE_STYLE_FILL_AREA(#15407);+#15407 = FILL_AREA_STYLE('',(#15408));+#15408 = FILL_AREA_STYLE_COLOUR('',#14022);+#15409 = STYLED_ITEM('color',(#15410),#13484);+#15410 = PRESENTATION_STYLE_ASSIGNMENT((#15411));+#15411 = SURFACE_STYLE_USAGE(.BOTH.,#15412);+#15412 = SURFACE_SIDE_STYLE('',(#15413));+#15413 = SURFACE_STYLE_FILL_AREA(#15414);+#15414 = FILL_AREA_STYLE('',(#15415));+#15415 = FILL_AREA_STYLE_COLOUR('',#14022);+#15416 = STYLED_ITEM('color',(#15417),#13497);+#15417 = PRESENTATION_STYLE_ASSIGNMENT((#15418));+#15418 = SURFACE_STYLE_USAGE(.BOTH.,#15419);+#15419 = SURFACE_SIDE_STYLE('',(#15420));+#15420 = SURFACE_STYLE_FILL_AREA(#15421);+#15421 = FILL_AREA_STYLE('',(#15422));+#15422 = FILL_AREA_STYLE_COLOUR('',#14022);+#15423 = STYLED_ITEM('color',(#15424),#13617);+#15424 = PRESENTATION_STYLE_ASSIGNMENT((#15425));+#15425 = SURFACE_STYLE_USAGE(.BOTH.,#15426);+#15426 = SURFACE_SIDE_STYLE('',(#15427));+#15427 = SURFACE_STYLE_FILL_AREA(#15428);+#15428 = FILL_AREA_STYLE('',(#15429));+#15429 = FILL_AREA_STYLE_COLOUR('',#14022);+#15430 = STYLED_ITEM('color',(#15431),#13717);+#15431 = PRESENTATION_STYLE_ASSIGNMENT((#15432));+#15432 = SURFACE_STYLE_USAGE(.BOTH.,#15433);+#15433 = SURFACE_SIDE_STYLE('',(#15434));+#15434 = SURFACE_STYLE_FILL_AREA(#15435);+#15435 = FILL_AREA_STYLE('',(#15436));+#15436 = FILL_AREA_STYLE_COLOUR('',#14022);+#15437 = STYLED_ITEM('color',(#15438),#13764);+#15438 = PRESENTATION_STYLE_ASSIGNMENT((#15439));+#15439 = SURFACE_STYLE_USAGE(.BOTH.,#15440);+#15440 = SURFACE_SIDE_STYLE('',(#15441));+#15441 = SURFACE_STYLE_FILL_AREA(#15442);+#15442 = FILL_AREA_STYLE('',(#15443));+#15443 = FILL_AREA_STYLE_COLOUR('',#14022);+#15444 = STYLED_ITEM('color',(#15445),#13811);+#15445 = PRESENTATION_STYLE_ASSIGNMENT((#15446));+#15446 = SURFACE_STYLE_USAGE(.BOTH.,#15447);+#15447 = SURFACE_SIDE_STYLE('',(#15448));+#15448 = SURFACE_STYLE_FILL_AREA(#15449);+#15449 = FILL_AREA_STYLE('',(#15450));+#15450 = FILL_AREA_STYLE_COLOUR('',#14022);+#15451 = STYLED_ITEM('color',(#15452),#13818);+#15452 = PRESENTATION_STYLE_ASSIGNMENT((#15453));+#15453 = SURFACE_STYLE_USAGE(.BOTH.,#15454);+#15454 = SURFACE_SIDE_STYLE('',(#15455));+#15455 = SURFACE_STYLE_FILL_AREA(#15456);+#15456 = FILL_AREA_STYLE('',(#15457));+#15457 = FILL_AREA_STYLE_COLOUR('',#14022);+#15458 = STYLED_ITEM('color',(#15459),#13827);+#15459 = PRESENTATION_STYLE_ASSIGNMENT((#15460));+#15460 = SURFACE_STYLE_USAGE(.BOTH.,#15461);+#15461 = SURFACE_SIDE_STYLE('',(#15462));+#15462 = SURFACE_STYLE_FILL_AREA(#15463);+#15463 = FILL_AREA_STYLE('',(#15464));+#15464 = FILL_AREA_STYLE_COLOUR('',#15465);+#15465 = COLOUR_RGB('',0.380000002513,0.380000002513,0.399999997426);+#15466 = STYLED_ITEM('color',(#15467),#13915);+#15467 = PRESENTATION_STYLE_ASSIGNMENT((#15468));+#15468 = SURFACE_STYLE_USAGE(.BOTH.,#15469);+#15469 = SURFACE_SIDE_STYLE('',(#15470));+#15470 = SURFACE_STYLE_FILL_AREA(#15471);+#15471 = FILL_AREA_STYLE('',(#15472));+#15472 = FILL_AREA_STYLE_COLOUR('',#15465);+#15473 = STYLED_ITEM('color',(#15474),#13919);+#15474 = PRESENTATION_STYLE_ASSIGNMENT((#15475));+#15475 = SURFACE_STYLE_USAGE(.BOTH.,#15476);+#15476 = SURFACE_SIDE_STYLE('',(#15477));+#15477 = SURFACE_STYLE_FILL_AREA(#15478);+#15478 = FILL_AREA_STYLE('',(#15479));+#15479 = FILL_AREA_STYLE_COLOUR('',#15465);+ENDSEC;+END-ISO-10303-21;
package.jsonadded+270@@ -0,0 +1,270 @@+{+ "slug": "lm3100mhx",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments DC-DC Converters, HTSSOP-20-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management ics",+ "lm3100mhx",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "lm3100mhx.kicad_sym",+ "lm3100mhx.kicad_mod",+ "lm3100mhx.glb",+ "lm3100mhx.step",+ "lm3100mhx.lbr",+ "docs/hero.png",+ "docs/lm3100mhx-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "lm3100mhx-hero.glb",+ "lm3100mhx-hero.overlay.json",+ "lm3100mhx-etched.glb"+ ],+ "component": {+ "mpn": "LM3100MHX",+ "manufacturer": "Texas Instruments",+ "package": "HTSSOP-20-EP",+ "pin_count": 21,+ "category": "Power Management ICs",+ "subcategory": "DC-DC Converters",+ "datasheet": "https://www.ti.com/lit/ds/symlink/lm3100mhx.pdf",+ "parts": {+ "symbol": "lm3100mhx.kicad_sym",+ "footprint": "lm3100mhx.kicad_mod",+ "model_3d": "lm3100mhx-hero.glb",+ "model_3d_plain": "lm3100mhx-etched.glb",+ "model_3d_step": "lm3100mhx-etched.step",+ "model_3d_step_plain": "lm3100mhx.step",+ "lbr": "lm3100mhx.lbr"+ },+ "distributor_links": {+ "lcsc": "C187923"+ },+ "distributor_check": {+ "checked_at": "2026-10-22T21:04:24Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": null,+ "status": "quota"+ },+ "mouser": {+ "pn": null,+ "status": "quota"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "N/C",+ "type": "unconnected",+ "description": "No connection; this pin must be left unconnected."+ },+ {+ "number": "2",+ "name": "SW",+ "type": "output",+ "description": "Switching node internally connected to the buck switch source; connect to the output inductor."+ },+ {+ "number": "3",+ "name": "SW",+ "type": "output",+ "description": "Switching node internally connected to the buck switch source; connect to the output inductor."+ },+ {+ "number": "4",+ "name": "VIN",+ "type": "power_in",+ "description": "Input supply pin to the device with a nominal input range of 4.5 V to 36 V."+ },+ {+ "number": "5",+ "name": "VIN",+ "type": "power_in",+ "description": "Input supply pin to the device with a nominal input range of 4.5 V to 36 V."+ },+ {+ "number": "6",+ "name": "BST",+ "type": "passive",+ "description": "Bootstrap capacitor connection; connect a 0.033 µF capacitor from SW to this pin, charged by an internal diode during the high-side switch off-time."+ },+ {+ "number": "7",+ "name": "GND",+ "type": "power_in",+ "description": "Analog ground for all internal circuitry other than the synchronous switches."+ },+ {+ "number": "8",+ "name": "SS",+ "type": "passive",+ "description": "Soft-start pin where an internal 8 µA current source charges an external capacitor to provide the soft-start function."+ },+ {+ "number": "9",+ "name": "N/C",+ "type": "unconnected",+ "description": "No connection; this pin must be left unconnected."+ },+ {+ "number": "10",+ "name": "N/C",+ "type": "unconnected",+ "description": "No connection; this pin must be left unconnected."+ },+ {+ "number": "11",+ "name": "TST",+ "type": "input",+ "description": "Test mode enable pin that forces the device into test mode; must be connected to ground for normal operation."+ },+ {+ "number": "12",+ "name": "N/C",+ "type": "unconnected",+ "description": "No connection; this pin must be left unconnected."+ },+ {+ "number": "13",+ "name": "FB",+ "type": "input",+ "description": "Feedback input internally connected to the regulation and over-voltage comparators with a 0.8 V regulation setting; connect to the feedback divider."+ },+ {+ "number": "14",+ "name": "EN",+ "type": "input",+ "description": "Enable pin; connect a voltage higher than 1.26 V to enable the regulator."+ },+ {+ "number": "15",+ "name": "RON",+ "type": "input",+ "description": "On-time control pin where an external resistor from VIN sets the high-side switch on-time."+ },+ {+ "number": "16",+ "name": "VCC",+ "type": "power_out",+ "description": "Start-up regulator output nominally regulated to 6 V; connect a capacitor of not less than 680 nF between VCC and GND."+ },+ {+ "number": "17",+ "name": "PGND",+ "type": "power_in",+ "description": "Power ground at the synchronous rectifier MOSFET source; tie to the power ground plane."+ },+ {+ "number": "18",+ "name": "PGND",+ "type": "power_in",+ "description": "Power ground at the synchronous rectifier MOSFET source; tie to the power ground plane."+ },+ {+ "number": "19",+ "name": "N/C",+ "type": "unconnected",+ "description": "No connection; this pin must be left unconnected."+ },+ {+ "number": "20",+ "name": "N/C",+ "type": "unconnected",+ "description": "No connection; this pin must be left unconnected."+ },+ {+ "number": "21",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-sonnet-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The pin-diagram text on page 3 lists names in an order that doesn't match the Pin Functions table (f; The datasheet labels the exposed pad 'DAP/EP' with no numeric pin number, so I used 'EP'. Its type i; The datasheet doesn't state pin directions. SW, VCC, BST and SS types are my inference from their fu"+ ],+ "pages_sent": 7,+ "cost_usd": 0.0956,+ "at": "2026-10-22T21:03:48"+ },+ "datasheet": {+ "url": "https://www.ti.com/lit/ds/symlink/lm3100mhx.pdf",+ "pages": 24,+ "sha256": "0b3a1e5eb905b98b",+ "source_tier": "mfr"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 21,+ "described": 21,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "lm3100mhx.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.41,+ 6.5,+ 1.2+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "810c6fd9973abc287a8950df2ed380a0e71043b68ff80fc054b2fa57e0577d9e",+ "checked": "2026-10-22",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "lm3100mhx-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.41,+ 6.5,+ 1.2+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "64277e18309faaa8bca927afc202218100e7d6d338ba26db988b161c7ba34843",+ "checked": "2026-10-22",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ }+}
page.jsonadded+276@@ -0,0 +1,276 @@+{+ "slug": "lm3100mhx",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments DC-DC Converters, HTSSOP-20-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management ics",+ "lm3100mhx",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "lm3100mhx.kicad_sym",+ "lm3100mhx.kicad_mod",+ "lm3100mhx.glb",+ "lm3100mhx.step",+ "lm3100mhx.lbr",+ "docs/hero.png",+ "docs/lm3100mhx-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "lm3100mhx-hero.glb",+ "lm3100mhx-hero.overlay.json",+ "lm3100mhx-etched.glb"+ ],+ "component": {+ "mpn": "LM3100MHX",+ "manufacturer": "Texas Instruments",+ "package": "HTSSOP-20-EP",+ "pin_count": 21,+ "category": "Power Management ICs",+ "subcategory": "DC-DC Converters",+ "datasheet": "https://www.ti.com/lit/ds/symlink/lm3100mhx.pdf",+ "parts": {+ "symbol": "lm3100mhx.kicad_sym",+ "footprint": "lm3100mhx.kicad_mod",+ "model_3d": "lm3100mhx-hero.glb",+ "model_3d_plain": "lm3100mhx-etched.glb",+ "model_3d_step": "lm3100mhx-etched.step",+ "model_3d_step_plain": "lm3100mhx.step",+ "lbr": "lm3100mhx.lbr"+ },+ "distributor_links": {+ "lcsc": "C187923"+ },+ "distributor_check": {+ "checked_at": "2026-10-22T21:04:24Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": null,+ "status": "quota"+ },+ "mouser": {+ "pn": null,+ "status": "quota"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "N/C",+ "type": "unconnected",+ "description": "No connection; this pin must be left unconnected."+ },+ {+ "number": "2",+ "name": "SW",+ "type": "output",+ "description": "Switching node internally connected to the buck switch source; connect to the output inductor."+ },+ {+ "number": "3",+ "name": "SW",+ "type": "output",+ "description": "Switching node internally connected to the buck switch source; connect to the output inductor."+ },+ {+ "number": "4",+ "name": "VIN",+ "type": "power_in",+ "description": "Input supply pin to the device with a nominal input range of 4.5 V to 36 V."+ },+ {+ "number": "5",+ "name": "VIN",+ "type": "power_in",+ "description": "Input supply pin to the device with a nominal input range of 4.5 V to 36 V."+ },+ {+ "number": "6",+ "name": "BST",+ "type": "passive",+ "description": "Bootstrap capacitor connection; connect a 0.033 µF capacitor from SW to this pin, charged by an internal diode during the high-side switch off-time."+ },+ {+ "number": "7",+ "name": "GND",+ "type": "power_in",+ "description": "Analog ground for all internal circuitry other than the synchronous switches."+ },+ {+ "number": "8",+ "name": "SS",+ "type": "passive",+ "description": "Soft-start pin where an internal 8 µA current source charges an external capacitor to provide the soft-start function."+ },+ {+ "number": "9",+ "name": "N/C",+ "type": "unconnected",+ "description": "No connection; this pin must be left unconnected."+ },+ {+ "number": "10",+ "name": "N/C",+ "type": "unconnected",+ "description": "No connection; this pin must be left unconnected."+ },+ {+ "number": "11",+ "name": "TST",+ "type": "input",+ "description": "Test mode enable pin that forces the device into test mode; must be connected to ground for normal operation."+ },+ {+ "number": "12",+ "name": "N/C",+ "type": "unconnected",+ "description": "No connection; this pin must be left unconnected."+ },+ {+ "number": "13",+ "name": "FB",+ "type": "input",+ "description": "Feedback input internally connected to the regulation and over-voltage comparators with a 0.8 V regulation setting; connect to the feedback divider."+ },+ {+ "number": "14",+ "name": "EN",+ "type": "input",+ "description": "Enable pin; connect a voltage higher than 1.26 V to enable the regulator."+ },+ {+ "number": "15",+ "name": "RON",+ "type": "input",+ "description": "On-time control pin where an external resistor from VIN sets the high-side switch on-time."+ },+ {+ "number": "16",+ "name": "VCC",+ "type": "power_out",+ "description": "Start-up regulator output nominally regulated to 6 V; connect a capacitor of not less than 680 nF between VCC and GND."+ },+ {+ "number": "17",+ "name": "PGND",+ "type": "power_in",+ "description": "Power ground at the synchronous rectifier MOSFET source; tie to the power ground plane."+ },+ {+ "number": "18",+ "name": "PGND",+ "type": "power_in",+ "description": "Power ground at the synchronous rectifier MOSFET source; tie to the power ground plane."+ },+ {+ "number": "19",+ "name": "N/C",+ "type": "unconnected",+ "description": "No connection; this pin must be left unconnected."+ },+ {+ "number": "20",+ "name": "N/C",+ "type": "unconnected",+ "description": "No connection; this pin must be left unconnected."+ },+ {+ "number": "21",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-sonnet-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The pin-diagram text on page 3 lists names in an order that doesn't match the Pin Functions table (f; The datasheet labels the exposed pad 'DAP/EP' with no numeric pin number, so I used 'EP'. Its type i; The datasheet doesn't state pin directions. SW, VCC, BST and SS types are my inference from their fu"+ ],+ "pages_sent": 7,+ "cost_usd": 0.0956,+ "at": "2026-10-22T21:03:48"+ },+ "datasheet": {+ "url": "https://www.ti.com/lit/ds/symlink/lm3100mhx.pdf",+ "pages": 24,+ "sha256": "0b3a1e5eb905b98b",+ "source_tier": "mfr"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 21,+ "described": 21,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "lm3100mhx.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.41,+ 6.5,+ 1.2+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "810c6fd9973abc287a8950df2ed380a0e71043b68ff80fc054b2fa57e0577d9e",+ "checked": "2026-10-22",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "lm3100mhx-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.41,+ 6.5,+ 1.2+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "64277e18309faaa8bca927afc202218100e7d6d338ba26db988b161c7ba34843",+ "checked": "2026-10-22",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}
viewers/footprint.htmladded+1@@ -0,0 +1 @@+<!doctype html><title>lm3100mhx</title>
viewers/symbol.htmladded+1@@ -0,0 +1 @@+<!doctype html><title>lm3100mhx</title>