main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lm2941srg: viewers · Ray
lm2941srg-etched.glb Publish 0.1.0 · Ray
lm2941srg-etched.step lm2941srg: factory component page (tier=lcsc) · Ray
lm2941srg-hero.glb lm2941srg: hero GLB from the etched model (keeps the MPN mark) · Ray
lm2941srg-hero.overlay.json Publish 0.1.0 · Ray
lm2941srg.glb Publish 0.1.0 · Ray
lm2941srg.kicad_mod Publish 0.1.0 · Ray
lm2941srg.kicad_sym Publish 0.1.0 · Ray
lm2941srg.lbr Publish 0.1.0 · Ray
lm2941srg.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 6 pins · Ray

LM2941SRG

HANSCHIP semiconductor · Linear Voltage Regulators (LDO) · TO-263-5

LM2941SRG from HANSCHIP semiconductor, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 ADJUST output Adjust pin sets the output voltage through external resistors R1 and R2 with VREF typically 1.275 V, giving an output range of 5 V to 20 V.
2 ON/OFF input ON/OFF has no internal pull-up or pull-down and must be driven: below 0.8 V the output is on and above 2.0 V the output is off, and it can be tied to GND if the function is not needed.
3 GND power_in Ground pin for the regulator, which also carries the ground-pin current IGND used in power dissipation calculations.
4 IN power_in Input supply pin, with a recommended maximum of 26 V and an absolute maximum of 45 V.
5 OUT power_out Regulated output pin, which requires a minimum 22 uF tantalum capacitor with ESR between 0.01 Ω and 5 Ω for loop stability.
6 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer HANSCHIP semiconductor
Package TO-263-5
Category Power Management
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output voltage VOUT 1.211 1.275 1.339 V 5 mA≤Io≤1A 3
Quiescent current Icc 10 20 mA VO+2V≤VIN≤26V, Io=5mA 3
Quiescent current Icc 35 60 mA VIN=VO+5V, Io=1A 3
Line regulation VRLINE 4 10 mV VO+2V≤VIN≤26V, Io=5mA 3
Load regulation VRLOAD 7 15 mV 50 mA≤IO≤1A 3
Dropout voltage VDrop 0.5 1 V Io=1A 3
Dropout voltage VDrop 110 200 mV Io=100mA 3
Short-circuit current Ishort 1.6 1.9 A VinMax=26V 3
Maximum operating voltage VinMax 26 31 V 3
ON threshold Von 0.7 0.8 V Io ≤1A 3
OFF threshold VOff 1.9 2 V Io ≤1A 3
ON/OFF pin current 50 300 uA VON/OFF =2.0V, Io ≤1A 3
Input supply voltage VIN 45 V 2
Storage temperature range Tstg -65 150 °C 2
Operating junction temperature TJ 150 °C 2
Lead temperature TLEAD 245 °C Soldering, 10 s 2
ESD human body model ESD 2000 V Human body model 2
ESD machine model ESD 300 V Machine model 2
Input voltage (recommended) VIN 26 V 3
Operating junction temperature (recommended) TJ -40 125 °C 3
Output impedance VOR 7 mΩ/V 100mADC and 20 mArms, f=120Hz 3
RMS noise Noise 0.003 % 10Hz-100KHz, Io=5mA 3
Thermal resistance junction-to-ambient, TO263-5 θJA 60 °C/W TO263-5 package 2

CAD (KiCad official)

  • Symbol: LM2941SRG
  • Footprint: Package_TO_SOT_SMD:TO-263-5_TabPin6
  • 3D model: TO-263-5 (KiCad packages3D, STEP)
  • 3D model files: lm2941srg-etched.step / lm2941srg-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm2941srg.step / lm2941srg.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HANSCHIP semiconductor datasheet (13 pp, sha256 d0a2997e4f47ce83, retrieved 2026-11-05, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF