main
Ray
lm2941mdt: laser-etched CAD + chip hero (factory 2.0.0 backfill)
50e792b
LM2941MDT
HGSEMI · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · TO-252-4
LM2941MDT from HGSEMI, in a TO-252-4. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ADJUST | output | Adjust pin. Feedback node for the external resistor divider (R1/R2) that programs the output voltage per VOUT = VREF x (R1+R2)/R1, where VREF is typically 1.275V. Sets output from 5V to 20V. |
| 2 | ON/OFF | input | TTL/CMOS enable control input. VIN < 0.8V (Von threshold) turns the regulator ON; VIN > 2.0V (Voff threshold) turns it OFF. Input current is typically 50uA (300uA max) at VON/OFF=2.0V. No internal pull; must be externally driven - tie to GND if unused. |
| 3 | IN | power_in | Unregulated input supply. Recommended operating range up to 26V, absolute maximum 45V. A 470nF (or larger) input bypass capacitor is recommended close to the pin. |
| 4 | OUT | power_out | Regulated LDO output, 1A capable with typical 0.6V dropout at 1A (1.0V max). Requires a minimum 22uF tantalum output capacitor with ESR between 0.01Ω and 5Ω for loop stability. Internal short-circuit current limit is typically 1.6A. |
| 5 | GND | power_in | Ground / device reference. On the TO-252-4 package GND is the exposed metal tab on the back of the package (Metal Tab GND); it must be soldered to the board GND plane, which also serves as the primary thermal path (θJA depends on copper area). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | TO-252-4 |
| Category | PMIC |
| Pins | 5 |
Ordering variants
LM2941MDT/TRLM2941MDTLM2941MDTTLM2941MDTS/TRLM2941MDTSLM2941MDTDQ4/TRLM2941MDTDQ4
CAD (KiCad official)
- Symbol:
LM2941MDT - Footprint:
Package_TO_SOT_SMD:TO-252-4 - 3D model: TO-252-4 (KiCad packages3D, STEP)
- 3D model files:
lm2941mdt-etched.step/lm2941mdt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2941mdt.step/lm2941mdt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HGSEMI datasheet (None pp, sha256
b89eb6971c3509b7, retrieved 2026-08-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LM2941MDT
**HGSEMI** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · TO-252-4
LM2941MDT from HGSEMI, in a TO-252-4. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ADJUST | output | Adjust pin. Feedback node for the external resistor divider (R1/R2) that programs the output voltage per VOUT = VREF x (R1+R2)/R1, where VREF is typically 1.275V. Sets output from 5V to 20V. |
| 2 | ON/OFF | input | TTL/CMOS enable control input. VIN < 0.8V (Von threshold) turns the regulator ON; VIN > 2.0V (Voff threshold) turns it OFF. Input current is typically 50uA (300uA max) at VON/OFF=2.0V. No internal pull; must be externally driven - tie to GND if unused. |
| 3 | IN | power_in | Unregulated input supply. Recommended operating range up to 26V, absolute maximum 45V. A 470nF (or larger) input bypass capacitor is recommended close to the pin. |
| 4 | OUT | power_out | Regulated LDO output, 1A capable with typical 0.6V dropout at 1A (1.0V max). Requires a minimum 22uF tantalum output capacitor with ESR between 0.01Ω and 5Ω for loop stability. Internal short-circuit current limit is typically 1.6A. |
| 5 | GND | power_in | Ground / device reference. On the TO-252-4 package GND is the exposed metal tab on the back of the package (Metal Tab GND); it must be soldered to the board GND plane, which also serves as the primary thermal path (θJA depends on copper area). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | TO-252-4 |
| Category | PMIC |
| Pins | 5 |
## Ordering variants
- `LM2941MDT/TR`
- `LM2941MDT`
- `LM2941MDTT`
- `LM2941MDTS/TR`
- `LM2941MDTS`
- `LM2941MDTDQ4/TR`
- `LM2941MDTDQ4`
## CAD (KiCad official)
- Symbol: `LM2941MDT`
- Footprint: `Package_TO_SOT_SMD:TO-252-4`
- 3D model: TO-252-4 (KiCad packages3D, STEP)
- 3D model files: `lm2941mdt-etched.step` / `lm2941mdt-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm2941mdt.step` / `lm2941mdt.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HGSEMI datasheet](docs/lm2941mdt-datasheet.pdf) (None pp, sha256 `b89eb6971c3509b7`, retrieved 2026-08-17, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lm2941mdt-datasheet.pdf)